Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Systems Client Experience Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
I have been working on Information Lifecycle Management (ILM) since before they coined the phrase. There were several break-out sessions on the third day at the [IBM System Storage Technical University 2011] related to new twists to ILM.
The Intelligent Storage Service Catalog (ISSC) and Smarter ILM
Hans Ammitzboll, Solution Rep for IBM Global Technology Services (GTS), presented an approach to ILM focused on using different storage products for different tiers. Is this new? Not at all! The original use of the phrase "Information Lifecycle Management" was coined in the early 1990s by StorageTek to help sell automated tape libraries.
Unfortunately, disk-only vendors started using the term ILM to refer to disk-to-disk tiering inside the disk array. Hans feels it does not make sense to put the least expensive penny-per-GB 7200 RPM disk inside the most expense enterprise-class high-end disk arrays.
IBM GTS manages not only IBM's internal operations, but the IT operations of hundreds of other clients. To help manage all this storage, they developed software to supplement reporting, monitoring and movement of data from one tier to another.
The Intelligent Storage Service Catalog (ISSC) can save up to 80 percent of planning time for managing storage. What did people use before? Hans poked fun at chargeback and showback systems that "offer savings" but don't actually "impose savings". He referred to these as Name-and-Shame, where the top 10 offenders of storage usage.
His storage pyramid involves a variety of devices, with IBM DS8000, SVC and XIV for the high-end, midrange disk like Storwize V7000, and blended disk-and-tape solutions like SONAS and Information Archive (IA) for the lower tiers.
Mark Taylor, IBM Advanced Technical Services, presented the policy-driven automation of IBM's Scale-Out NAS (SONAS). A SONAS system can hold 1 to 256 file systems, and each file system is further divided into fileset containers. Think of fileset containers like 'tree branches' of the file system.es.
SONAS supports policies for file placement, file movement, and file deletion. These are SQL-like statements that are then applied to specific file systems in the SONAS. Input variables include date last modified, date last accessed, file name, file size, fileset container name, user id and group id. You can choose to have the rules be case-sensitive or case-insensitive. The rules support macros. A macro pre-processor can help simplify calculations and other definitions that are used repeatedly.
Each file system in SONAS consists of one or more storage pools. For file systems with multiple pools, file placement policies can determine which pool to place each file. Normally, when a set of files are in a specific sub-directory on other NAS systems, all the files will be on the same type of disk. With SONAS, some files can be placed on 15K RPM drives, and other files on slower 7200 RPM drives. This file virtualization separates the logical grouping of files from the physical placement of them.
Once files are placed, other policies can be written to migrate from one disk pool to another, migrate from disk to tape, or delete the file. Migrating from one disk pool to another is done by relocation. The next time the file is accessed, it will be accessed directly from the new pool. When migrating from disk to tape, a stub is left in the directory structure metadata, so that subsequent access will cause the file to be recalled automatically from tape, back to disk. Policies can determine which storage pool files are recalled to when this happens.
Migrating from disk to tape involves sending the data from SONAS to external storage pool manager, such as IBM Tivoli Storage Manager (TSM) server connected to a tape library. SONAS supports pre-migration, which allows the data to be copied to tape, but left on disk, until space is needed to be freed up. For example, a policy with THRESHOLD(90,70,50) will kick in when the file system is 90 percent full, file will be migrated (moved) to tape until it reaches 70 percent, and then files will be pre-migrated (copied) to tape until it reaches 50 percent.
Policies to delete files can apply to both disk and tape pools. Files deleted on tape remove the stub from the directory structure metadata and notify the external storage pool manager to clean up its records for the tape data.
If this all sounds like a radically new way of managing data, it isn't. Many of these functions are based on IBM's Data Facility Storage Management Subsystem (DFSMS) for the mainframe. In effect, SONAS brings mainframe-class functionality to distributed systems.
Understanding IBM SONAS Use Cases
For many, the concept of a scale-out NAS is new. Stephen Edel, IBM SONAS product offering manager, presented a variety of use cases where SONAS has been successful.
First, let's consider backup. IBM SONAS has built-in support for Tivoli Storage Manager (TSM), as well as supporting the NDMP industry standard protocol, for use with Symantec NetBackup, Commvault Simpana, and EMC Legato Networker. While many NAS solutions support NDMP, IBM SONAS can support up to 128 session per interface node, and up to 30 interface nodes, for parallel processing. SONAS has a high-speed file scan to identify files to be backed up, and will pre-fetch the small files into cache to speed up the backup process. A SONAS system can support up to 256 systems, and each file system can be backed up on its own unique schedule if you like. Different file systems can be backed up to different backup servers.
SONAS also has anti-virus support, with your choice of Symantec or McAfee. An anti-virus scan can be run on demand, as needed, or as files are individually accessed. When a Windows client reads a file, SONAS will determine if it has been already scanned with the most recent anti-virus signatures, and if not, will scan before allowing the file to be read. SONAS will also scan new files created.
Successful SONAS deployments addressed the following workloads:
content capture including video capture
high performance computing, research and business analytics
"Cheap and Deep" archive
worldwide information exchange and geographically distant collaboration
SONAS is selling well in Government, Universities, Healthcare, and Media/Entertainment, but is not limited to these industries. It can be used for private cloud deployments and public cloud deployments. Having centralized management for Petabytes of data can be cost-effective either way.
IBM SONAS brings the latest techologies to bring a Smarter ILM to a variety of workloads and use cases.
Clod Barrera is an IBM Distinguished Engineer and Chief Technical Strategist for IBM System Storage. He predicts that by 2015, 10 percent of the servers and storage purchases, as well as 25 percent of the network gear purchases, will be related to Cloud deployments. Cloud Storage is expected to grow at a compound annual growth rate (CAGR) of 32 percent through 2015, compared to only 3.8 percent growth for non-Cloud storage.
Cloud Computing is allowing companies to rethink their IT infrastructure, and reinvent their business. Clod presented an interesting chart on the "Taxonomy" of storage in Cloud environments. On the left he had examples of Storage that was part of a Cloud Compute application. On the right he had storage that was accessed directly through protocols or APIs. Under each he had several examples for transactional data, stream data, backups and archives.
Clod feels the only difference between Private and Public clouds is a matter of ownership. In private clouds, these are owned by the company that uses them via their private Intranet network. Public clouds are owned by Cloud Service providers and are accessed over the public Internet. Clod presented IBM's strategy to deliver Cloud at five levels:
Private Cloud: on-site equipment, behind company firewall, managed by IT staff
Managed Private Cloud: on-site equipment, behind company firewall, managed by IBM or other Cloud Service provider
Hosted Private Cloud: dedicated, off-premises equipment, located and managed by IBM or other Cloud Service Provider, and access through VPN
Shared Cloud Services: shared, off-premises equipment, located at IBM or other Cloud Service Provider, managed by IBM or Cloud Service provider, and access through VPN. The facility is intended for enterprises only, on a contractual basis, and will be auditable for compliance to government regulations, etc.
Public Cloud: shared, off-premises equipment, located and managed by IBM or other Cloud Service provider, targeted to offer cloud compute and storage resources, with standardized platforms of operating systems and middleware, for individuals, small and medium sized businesses.
As with storage in traditional data center deployments, storage in clouds will be tiered, with Tier 0 being the fastest tier, to Tier 4 for "deep and cheap" archive storage. IBM SONAS is an example of Cloud-ready storage that can help make these tiers accessible through standard Ethernet protocols. Cloud Service providers will use metering and Service Level Agreements (SLAs) to offer different rates for different tiers of storage in the cloud.
Clod wrapped up his session explaining IBM's Cloud Computing Reference Architecture (CCRA). This is an all-encompassing diagram that shows how all of IBM's hardware, software and services fit into Cloud deployments.
Jim is an IBM Fellow for IBM Systems and Technology Group. There are only 73 IBM Fellows currently working for IBM, and this is the highest honor IBM can bestow on an employee. He has been working with IBM since 1968.
He is tasked with predicting the future of IT, and help drive strategic direction for IBM. Cost pressures, requirements for growth, accelerating innovation and changing business needs help influence this direction.
IBM's approach is to integrate four different "IT building blocks":
Scale-up Systems, like the IBM System Storage DS8000 and TS3500 Tape Library
Resource Pools, such as IBM Storage Pools formed from managed disks by IBM SAN Volume Controller (SVC)
Integrated stacks and appliances, integrated software and hardware stacks, from Storwize V7000 to full rack systems like IBM Smart Analytics Server or CloudBurst.
Mobility of workloads and resources requires unified end-to-end service management. Fortunately, IBM is the #1 leader in IT Service Management solutions.
Jim addressed three myths:
Myth 1: IT Infrastructures will be homogenous.
Jim feels that innovations are happening too rapidly for this to ever happen, and is not a desirable end-goal. Instead, a focus to find the right balance of the IT building blocks might be a better approach.
Myth 2: All of your problems can be solved by replacing everything with product X.
Jim feels that the days of "rip-and-replace" are fading away. As IBM Executive Steve Mills said, "It isn't about the next new thing, but how well new things integrate with established applications and processes."
Myth 3: All IT will move to the Cloud model.
Jim feels a substantial portion of IT will move to the Cloud, but not all of it. There will always be exceptions where the old traditional ways of doing things might be appropriate. Clouds are just one of the many building blocks to choose from.
Jim's focus lately has been finding new ways to take advantage of virtualization concepts. Server, storage and network virtualization are helping address these challenges through four key methods:
Sharing - virtualization that allows a single resource to be used by multiple users. For example, hypervisors allow several guest VM operating systems share common hardware on a single physical server.
Aggregation - virtualization that allows multiple resources to be managed as a single pool. For example, SAN Volume Controller can virtualize the storage of multiple disk arrays and create a single storage pool.
Emulation - virtualization that allows one set of resources to look and feel like a different set of resources. Some hypervisors can emulate different kinds of CPU processors, for example.
Insulation - virtualization that hides the complexity from the end-user application or other higher levels of infrastructure, making it easier to make changes of the underlying managed resources. For example, both SONAS and SAN Volume Controller allow disk capacity to be removed and replaced without disruption to the application.
In today's economy, IT transformation costs must be low enough to yield near-term benefits. The long-term benefits are real, but near-term benefits are needed for projects to get started.
What set's IBM ahead of the pack? Here was Jim's list:
100 Years of Innovation, including being the U.S. Patent leader for the last 18 years in a row
IBM's huge investment in IBM Research, with labs all over the globe
Leadership products in a broad portfolio
Workload-optimized designs with integration from middleware all the way down to underlying hardware
Comprehensive management software for IBM and non-IBM equipment
Clod is an IBM Distinguished Engineer and Chief Technical Strategist for IBM System Storage. His presentation focused on trends and directions in the IT storage industry. Clod started with five workload categories:
To address these unique workload categories, IBM will offer workload-optimized systems. The four drivers on the design for these are performance, efficiency, scalability, and integration. For example, to address performance, companies can adopt Solid-State Drives (SSD). Unfortunately, these are 20 times more expensive dollar-per-GB than spinning disk, and the complexity involved in deciding what data to place on SSD was daunting. IBM solved this with an elegant solution called IBM System Storage Easy Tier, which provides automated data tiering for IBM DS8000, SAN Volume Controller (SVC) and Storwize V7000.
For scalability, IBM has adopted Scale-Out architectures, as seen in the XIV, SVC, and SONAS. SONAS is based on the highly scalable IBM General Parallel File System (GPFS). File systems are like wine, they get better with age. GPFS was introduced 15 years ago, and is more mature than many of the other "scalable file systems" from our competition.
Areal Density advancements on Hard Disk Drives (HDD) are slowing down. During the 1990s, the IT industry enjoyed 60 to 100 percent annual improvement in areal density (bits per square inch). In the 2000s, this dropped to 25 to 40 percent, as engineers are starting to hit various physical limitations.
Storage Efficiency features like compression have been around for a while, but are being deployed in new ways. For example, IBM invented WAN compression needed for Mainframe HASP. WAN compression became industry standard. Then IBM introduced compression on tape, and now compression on tape is an industry standard. ProtecTIER and Information Archive are able to combine compression with data deduplication to store backups and archive copies. Lastly, IBM now offers compression on primary data, through the IBM Real-Time Compression appliance.
For the rest of this decade, IBM predicts that tape will continue to enjoy (at least) 10 times lower dollar-per-GB than the least expensive spinning disk. Disk and Tape share common technologies, so all of the R&D investment for these products apply to both types of storage media.
For integration, IBM is leading the effort to help companies converge their SAN and LAN networks. By 2015, Clod predicts that there will be more FCoE purchased than FCP. IBM is also driving integration between hypervisors and storage virtualization. For example, IBM already supports VMware API for Array Integration (VAAI) in various storage products, including XIV, SVC and Storwize V7000.
Lastly, Clod could not finish a presentation without mentioning Cloud Computing. Cloud storage is expected to grow 32 percent CAGR from year 2010 to 2015. Roughly 10 percent of all servers and storage will be in some type of cloud by 2015.
As is often the case, I am torn between getting short posts out in a timely manner versus spending some more time to improve the length and quality of information, but posted much later. I will spread out the blog posts in consumable amounts throughout the next week or two, to achieve this balance.
Did IBM XIV force EMC's hand to announce VMAXe? Let's take a stroll down memory lane.
In 2008, IBM XIV showed the world that it could ship a Tier-1, high-end, enterprise-class system using commodity parts. Technically, prior to its acquisition by IBM, the XIV team had boxes out in production since 2005. EMC incorrectly argued this announcement meant the death of the IBM DS8000. Just because EMC was unable to figure out how to have more than one high-end disk product, doesn't mean IBM or other storage vendors were equally challenged. Both IBM XIV and DS8000 are Tier-1, high-end, enterprise-class storage systems, as are the IBM N series N7900 and the IBM Scale-Out Network Attached Storage (SONAS).
In April 2009, EMC followed IBM's lead with their own V-Max system, based on Symmetrix Engenuity code, but on commodity x86 processors. Nobody at EMC suggested that the V-Max meant the death of their other Symmetrix box, the DMX-4, which means that EMC proved to themselves that a storage vendor could offer multiple high-end disk systems. Hitachi Data Systems (HDS) would later offer the VSP, which also includes some commodity hardware as well.
In July 2009, analysts at International Technology Group published their TCO findings that IBM XIV was 63 percent less expensive than EMC V-Max, in a whitepaper titled [COST/BENEFIT CASE
FOR IBM XIV STORAGE SYSTEM Comparing Costs for IBM XIV and EMC V-Max Systems]. Not surprisingly, EMC cried foul, feeling that EMC V-Max had not yet been successful in the field, it was too soon to compare newly minted EMC gear with a mature product like XIV that had been in production accounts for several years. Big companies like to wait for "Generation 1" of any new product to mature a bit before they purchase.
To compete against IBM XIV's very low TCO, EMC was forced to either deeply discount their Symmetrix, or counter-offer with lower-cost CLARiiON, their midrange disk offering. An ex-EMCer that now works for IBM on the XIV sales team put it in EMC terms -- "the IBM XIV provides a Symmetrix-like product at CLARiiON-like prices."
(Note: Somewhere in 2010, EMC dropped the hyphen, changing the name from V-Max to VMAX. I didn't see this formally announced anywhere, but it seems that the new spelling is the officially correct usage. A common marketing rule is that you should only rename failed products, so perhaps dropping the hyphen was EMC's way of preventing people from searching older reviews of the V-Max product.)
This month, IBM introduced the IBM XIV Gen3 model 114. The analysts at ITG updated their analysis, as there are now more customers that have either or both products, to provide a more thorough comparison. Their latest whitepaper, titled [Cost/Benefit Case for IBM XIV Systems: Comparing Cost
Structures for IBM XIV and EMC VMAX Systems], shows that IBM maintains its substantial cost savings advantage, representing 69 percent less Total Cost of Ownership (TCO) than EMC, on average, over the course of three years.
In response, EMC announced its new VMAXe, following the naming convention EMC established for VNX and VNXe. Customers cannot upgrade VNXe to VNX, nor VMAXe to VMAX, so at least EMC was consistent in that regard. Like the IBM XIV and XIV Gen3, the new EMC VMAXe eliminated "unnecessary distractions" like CKD volumes and FICON attachment needed for the IBM z/OS operating system on IBM System z mainframes. Fellow blogger Barry Burke from EMC explains everything about the VMAXe in his blog post [a big thing in a small package].
So, you have to wonder, did IBM XIV force EMC's hand into offering this new VMAXe storage unit? Surely, EMC sales reps will continue to lead with the more profitable DMX-4 or VMAX, and then only offer the VMAXe when the prospective customer mentions that the IBM XIV Gen3 is 69 percent less expensive. I haven't seen any list or street prices for the VMAXe yet, but I suspect it is less expensive than VMAX, on a dollar-per-GB basis, so that EMC will not have to discount it as much to compete against IBM.
The new [IBM System Storage Tape Controller 3592 Model C07] is an upgrade to the previous C06 controller. Like the C06, the new 3592-C07 can have up to four FICON (4Gbps) ports, four FC ports, and connect up to 16 drives. The difference is that the C07 supports 8Gbps speed FC ports, and can support the [new TS1140 tape drives that were announced on May 9]. A cool feature of the C07 is that it has a built-in library manager function for the mainframe. On the previous models, you had to have a separate library manager server.
Crossroads ReadVerify Appliance (3222-RV1)
IBM has entered an agreement to resell [Crossroads ReadVerify Appliance], or "RV1" for short. The RV1 is a 1U-high server with software that gathers information on the utilization, performance and health for a physical tape environment, such as an IBM TS3500 Tape Library. The RV1 also offers a feature called "ArchiveVerify" which validates long-term retention archive tapes, providing an audit trail on the readability of tape media. This can be useful for tape libraries attached behind IBM Information Archive compliance storage solution, or the IBM Scale-Out Network Attached Storage (SONAS).
As an added bonus, Crossroads has great videos! Here's one, titled [Tape Sticks]
Linear Tape File System (LTFS) Library Edition Version 2.1
While the hardware is all refreshed, the overall "scale-out" architecture is unchanged. Kudos to the XIV development team for designing a system that is based entirely on commodity hardware, allowing new hardware generations to be introduced with minimal changes to the vast number of field-proven software features like thin provisioning, space-efficient read-only and writeable snapshots, synchronous and asynchronous mirroring, and Quality of Service (QoS) performance classes.
The new XIV Gen3 features an Infiniband interconnect, faster 8Gbps FC ports, more iSCSI ports, faster motherboard and processors, SAS-NL 2TB drives, 24GB cache memory per XIV module, all in a single frame IBM rack that supports the IBM Rear Door Heat Exchanger. The results are a 2x to 4x boost in performance for various workloads. Here are some example performance comparisons:
Disclaimer: Performance is based on measurements and projections using standard IBM benchmarks in a controlled environment. The actual throughput that any user will experience will vary depending upon considerations such as the amount of multiprogramming in the user's job stream, the I/O configuration, the storage configuration, and the workload processed. Therefore, no assurance can be given that an individual user will achieve throughput improvements equivalent to the performance ratios stated here. Your mileage may vary.
In a Statement of Direction, IBM also has designed the Gen3 modules to be "SSD-ready" which means that you can insert up to 500GB of Solid-State drive capacity per XIV module, up to 7.5TB in a fully-configured 15 module frame. This SSD would act as an extension of DRAM cache, similar to how Performance Accelerator Modules (PAM) on IBM N series.
IBM will continue to sell XIV Gen2 systems for the next 12-18 months, as some clients like the smaller 1TB disk drives. The new Gen3 only comes with 2TB drives. There are some clients that love the XIV so much, that they also use it for less stringent Tier 2 workloads. If you don't need the blazing speed of the new Gen3, perhaps the lower cost XIV Gen2 might be a great fit!
As if I haven't said this enough times already, the IBM XIV is a Tier-1, high-end, enterprise-class disk storage system, optimized for use with mission critical workloads on Linux, UNIX and Windows operating systems, and is the ideal cost-effective replacement for EMC Symmetrix VMAX, HDS USP-V and VSP, and HP P9000 series disk systems, . Like the XIV Gen2, the XIV Gen3 can be used with IBM System i using VIOS, and with IBM System z mainframes running Linux, z/VM or z/VSE. If you run z/OS or z/TPF with Count-Key-Data (CKD) volumes and FICON attachment, go with the IBM System Storage DS8000 instead, IBM's other high-end disk system.