Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Systems Client Experience Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2018, Tony celebrates his 32th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Well, it feels like Tuesday and you know what that means... "IBM Announcement Day!" Actually, today is Wednesday, but since Monday was Memorial Day holiday here in the USA, my week is day-shifted. Yesterday, IBM announced its latest IBM FlashCopy Manager v2.2 release. Fellow blogger, Del Hoobler (IBM) has also posted something on this out atthe [Tivoli Storage Blog].
IBM FlashCopy Manager replaces two previous products. One was called Tivoli Storage Manager for Copy Services, the other was called Tivoli Storage Manager for Advanced Copy Services. To say people were confused between these two was an understatement, the first was for Windows, and the second was for UNIX and Linux operating systems. The solution? A new product that replaces both of these former products to support Windows, UNIX and Linux! Thus, IBM FlashCopy Manager was born. I introduced this product back in 2009 in my post [New DS8700 and other announcements].
IBM Tivoli Storage FlashCopy Manager provides what most people with "N series SnapManager envy" are looking for: application-aware point-in-time copies. This product takes advantage of the underlying point-in-time interfaces available on various disk storage systems:
FlashCopy on the DS8000 and SAN Volume Controller (SVC)
Snapshot on the XIV storage system
Volume Shadow Copy Services (VSS) interface on the DS3000, DS4000, DS5000 and non-IBM gear that supports this Microsoft Windows protocol
For Windows, IBM FlashCopy Manager can coordinate the backup of Microsoft Exchange and SQL Server. The new version 2.2 adds support for Exchange 2010 and SQL Server 2008 R2. This includes the ability to recover an individual mailbox or mail item from an Exchange backup. The data can be recovered directly to an Exchange server, or to a PST file.
For UNIX and Linux, IBM FlashCopy Manager can coordinate the backup of DB2, SAP and Oracle databases. Version 2.2 adds support specific Linux and Solaris operating systems, and provides a new capability for database cloning. Basically, database cloning restores a database under a new name with all the appropriate changes to allow its use for other purposes, like development, test or education training. A new "fcmcli" command line interface allows IBM FlashCopy Manager to be used for custom applications or file systems.
A common misperception is that IBM FlashCopy Manager requires IBM Tivoli Storage Manager backup software to function. That is not true. You have two options:
In Stand-alone mode, it's just you, the application, IBM FlashCopy Manager and your disk system. IBM FlashCopy Manager coordinates the point-in-time copies, maintains the correct number of versions, and allows you to backup and restore directly disk-to-disk.
Unified Recovery Management with Tivoli Storage Manager
Of course, the risk with relying only on point-in-time copies is that in most cases, they are on the same disk system as the original data. The exception being virtual disks from the SAN Volume Controller. IBM FlashCopy Manager can be combined with IBM Tivoli Storage Manager so that the point-in-time copies can be copied off to a local or remote TSM server, so that if the disk system that contains both the source and the point-in-time copies fails, you have a backup copy from TSM. In this approach, you can still restore from the point-in-time copies, but you can also restore from the TSM backups as well.
IBM FlashCopy Manager is an excellent platform to connect application-aware fucntionality with hardware-based copy services.
It's Tuesday, and that means more IBM announcements!
I haven't even finished blogging about all the other stuff that got announced last week, and here we are with more announcements. Since IBM's big [Pulse 2010 Conference] is next week, I thought I would cover this week's announcement on Tivoli Storage Manager (TSM) v6.2 release. Here are the highlights:
Client-Side Data Deduplication
This is sometimes referred to as "source-side" deduplication, as storage admins can get confused on which servers are clients in a TSM client-server deployment. The idea is to identify duplicates at the TSM client node, before sending to the TSM server. This is done at the block level, so even files that are similar but not identical, such as slight variations from a master copy, can benefit. The dedupe process is based on a shared index across all clients, and the TSM server, so if you have a file that is similar to a file on a different node, the duplicate blocks that are identical in both would be deduplicated.
This feature is available for both backup and archive data, and can also be useful for archives using the IBM System Storage Archive Manager (SSAM) v6.2 interface.
Simplified management of Server virtualization
TSM 6.2 improves its support of VMware guests by adding auto-discovery. Now, when you spontaneously create a new virtual machine OS guest image, you won't have to tell TSM, it will discover this automatically! TSM's legendary support of VMware Consolidated Backup (VCB) now eliminates the manual process of keeping track of guest images. TSM also added support of the Vstorage API for file level backup and recovery.
While IBM is the #1 reseller of VMware, we also support other forms of server virtualization. In this release, IBM adds support for Microsoft Hyper-V, including support using Microsoft's Volume Shadow Copy Services (VSS).
Automated Client Deployment
Do you have clients at all different levels of TSM backup-archive client code deployed all over the place? TSM v6.2 can upgrade these clients up to the latest client level automatically, using push technology, from any client running v5.4 and above. This can be scheduled so that only certain clients are upgraded at a time.
Simultaneous Background Tasks
The TSM server has many background administrative tasks:
Migration of data from one storage pool to another, based on policies, such as moving backups and archives on a disk pool over to a tape pools to make room for new incoming data.
Storage pool backup, typically data on a disk pool is copied to a tape pool to be kept off-site.
Copy active data. In TSM terminology, if you have multiple backup versions, the most recent version is called the active version, and the older versions are called inactive. TSM can copy just the active versions to a separate, smaller disk pool.
In previous releases, these were done one at a time, so it could make for a long service window. With TSM v6.2, these three tasks are now run simultaneously, in parallel, so that they all get done in less time, greatly reducing the server maintenance window, and freeing up tape drives for incoming backup and archive data. Often, the same file on a disk pool is going to be processed by two or more of these scheduled tasks, so it makes sense to read it once and do all the copies and migrations at one time while the data is in buffer memory.
Enhanced Security during Data Transmission
Previous releases of TSM offered secure in-flight transmission of data for Windows and AIX clients. This security uses Secure Socket Layer (SSL) with 256-bit AES encryption. With TSM v6.2, this feature is expanded to support Linux, HP-UX and Solaris.
Improved support for Enterprise Resource Planning (ERP) applications
I remember back when we used to call these TDPs (Tivoli Data Protectors). TSM for ERP allows backup of ERP applications, seemlessly integrating with database-specific tools like IBM DB2, Oracle RMAN, and SAP BR*Tools. This allows one-to-many and many-to-one configurations between SAP servers and TSM servers. In other words, you can have one SAP server backup to several TSM servers, or several SAP servers backup to a single TSM server. This is done by splitting up data bases into "sub-database objects", and then process each object separately. This can be extremely helpful if you have databases over 1TB in size. In the event that backing up an object fails and has to be re-started, it does not impact the backup of the other objects.
Well, it's Tuesday again, but this time, today we had our third big storage launch of 2009! A lot got announced today as part of IBM's big "Dynamic Infrastructure" marketing campaign. I will just focus on the
disk-related announcements today:
IBM System Storage DS8700
IBM adds a new model to its DS8000 series with the
[IBM System Storage DS8700]. Earlier this month, fellow blogger and arch-nemesis Barry Burke from EMC posted [R.I.P DS8300] on this mistaken assumption that the new DS8700 meant that DS8300 was going away, or that anyone who bought a DS8300 recently would be out of luck. Obviously, I could not respond until today's announcement, as the last thing I want to do is lose my job disclosing confidential information. BarryB is wrong on both counts:
IBM will continue to sell the DS8100 and DS8300, in addition to the new DS8700.
Clients can upgrade their existing DS8100 or DS8300 systems to DS8700.
BarryB's latest post [What's In a Name - DS8700] is fair game, given all the fun and ridicule everyone had at his expense over EMC's "V-Max" name.
So the DS8700 is new hardware with only 4 percent new software. On the hardware side, it uses faster POWER6 processors instead of POWER5+, has faster PCI-e buses instead of the RIO-G loops, and faster four-port device adapters (DAs) for added bandwidth between cache and drives. The DS8700 can be ordered as a single-frame dual 2-way that supports up to 128 drives and 128GB of cache, or as a dual 4-way, consisting of one primary frame, and up to four expansion frames, with up to 384GB of cache and 1024 drives.
Not mentioned explicitly in the announcements were the things the DS8700 does not support:
ESCON attachment - Now that FICON is well-established for the mainframe market, there is no need to support the slower, bulkier ESCON options. This greatly reduced testing effort. The 2-way DS8700 can support up to 16 four-port FICON/FCP host adapters, and the 4-way can support up to 32 host adapters, for a maximum of 128 ports. The FICON/FCP host adapter ports can auto-negotiate between 4Gbps, 2Gbps and 1Gbps as needed.
LPAR mode - When IBM and HDS introduced LPAR mode back in 2004, it sounded like a great idea the engineers came up with. Most other major vendors followed our lead to offer similar "partitioning". However, it turned out to be what we call in the storage biz a "selling apple" not a "buying apple". In other words, something the salesman can offer as a differentiating feature, but that few clients actually use. It turned out that supporting both LPAR and non-LPAR modes merely doubled the testing effort, so IBM got rid of it for the DS8700.
Update: I have been reminded that both IBM and HDS delivered LPAR mode within a month of each other back in 2004, so it was wrong for me to imply that HDS followed IBM's lead when obviously development happened in both companies for the most part concurrently prior to that. EMC was late to the "partition" party, but who's keeping track?
Initial performance tests show up to 50 percent improvement for random workloads, and up to 150 percent improvement for sequential workloads, and up to 60 percent improvement in background data movement for FlashCopy functions. The results varied slightly between Fixed Block (FB) LUNs and Count-Key-Data (CKD) volumes, and I hope to see some SPC-1 and SPC-2 benchmark numbers published soon.
The DS8700 is compatible for Metro Mirror, Global Mirror, and Metro/Global Mirror with the rest of the DS8000 series, as well as the ESS model 750, ESS model 800 and DS6000 series.
New 600GB FC and FDE drives
IBM now offers [600GB drives] for the DS4700 and DS5020 disk systems, as well as the EXP520 and EXP810 expansion drawers. In each case, we are able to pack up to 16 drives into a 3U enclosure.
Personally, I think the DS5020 should have been given a DS4xxx designation, as it resembles the DS4700
more than the other models of the DS5000 series. Back in 2006-2007, I was the marketing strategist for IBM System Storage product line, and part of my job involved all of the meetings to name or rename products. Mostly I gave reasons why products should NOT be renamed, and why it was important to name the products correctly at the beginning.
IBM System Storage SAN Volume Controller hardware and software
Fellow IBM master inventory Barry Whyte has been covering the latest on the [SVC 2145-CF8 hardware]. IBM put out a press release last week on this, and today is the formal announcement with prices and details. Barry's latest post
[SVC CF8 hardware and SSD in depth] covers just part of the entire
The other part of the announcement was the [SVC 5.1 software] which can be loaded
on earlier SVC models 8F2, 8F4, and 8G4 to gain better performance and functionality.
To avoid confusion on what is hardware machine type/model (2145-CF8 or 2145-8A4) and what is software program (5639-VC5 or 5639-VW2), IBM has introduced two new [Solution Offering Identifiers]:
5465-028 Standard SAN Volume Controller
5465-029 Entry Edition SAN Volume Controller
The latter is designed for smaller deployments, supports only a single SVC node-pair managing up to
150 disk drives, available in Raven Black or Flamingo Pink.
EXN3000 and EXP5060 Expansion Drawers
IBM offers the [EXN3000 for the IBM N series]. These expansion drawers can pack 24 drives in a 4U enclosure. The drives can either be all-SAS, or all-SATA, supporting 300GB, 450GB, 500GB and 1TB size capacity drives.
The [EXP5060 for the IBM DS5000 series] is a high-density expansion drawer that can pack up to 60 drives into a 4U enclosure. A DS5100 or DS5300
can handle up to eight of these expansion drawers, for a total of 480 drives.
Pre-installed with Tivoli Storage Productivity Center Basic Edition. Basic Edition can be upgraded with license keys to support Data, Disk and Standard Edition to extend support and functionality to report and manage XIV, N series, and non-IBM disk systems.
Pre-installed with Tivoli Key Lifecycle Manager (TKLM). This can be used to manage the Full Disk Encryption (FDE) encryption-capable disk drives in the DS8000 and DS5000, as well as LTO and TS1100 series tape drives.
IBM Tivoli Storage FlashCopy Manager v2.1
The [IBM Tivoli Storage FlashCopy Manager V2.1] replaces two products in one. IBM used
to offer IBM Tivoli Storage Manager for Copy Services (TSM for CS) that protected Windows application data, and IBM Tivoli Storage Manager for Advanced Copy Services (TSM for ACS) that protected AIX application data.
The new product has some excellent advantages. FlashCopy Manager offers application-aware backup of LUNs containing SAP, Oracle, DB2, SQL server and Microsoft Exchange data. It can support IBM DS8000, SVC and XIV point-in-time copy functions, as well as the Volume Shadow Copy Services (VSS) interfaces of the IBM DS5000, DS4000 and DS3000 series disk systems. It is priced by the amount of TB you copy, not on the speed or number of CPU processors inside the server.
Don't let the name fool you. IBM FlashCopy Manager does not require that you use Tivoli Storage Manager (TSM) as your backup product. You can run IBM FlashCopy Manager on its own, and it will manage your FlashCopy target versions on disk, and these can be backed up to tape or another disk using any backup product. However, if you are lucky enough to also be using TSM, then there is optional integration that allows TSM to manage the target copies, move them to tape, inventory them in its DB2 database, and provide complete reporting.
Yup, that's a lot to announce in one day. And this was just the disk-related portion of the launch!
A lot was announced this week, so I decided to break it up into several separate posts. This is part 3 in my 3-part series, focusing on our Tivoli Storage products.
To read the rest of the series, see:
The latest release of FlashCopy Manager now supports NetApp and IBM N series storage devices. This provides application-aware snapshots, coordinated with applications like SAP, DB2 and Oracle.
FlashCopy Manager now integrates with Metro and Global Mirror capabilities, so that application-consistent copies are available at remote sites for disaster recovery, or to off-load the FlashCopy destination copy from disk to Tivoli Storage Manager storage pools.
Tivoli Storage Manager v6.4
IBM Tivoli Storage Manager is part of IBM's Unifed Recovery Management. Here are some highlights:
Enhanced Reporting. Cognos reporting to monitor backup and archive environments.
TSM for ERP. I remember when these were called "Tivoli Data Protection" modules. We still refer to them as "TDPs". The TSM for ERP provides backup capability for SAP environments, and this latest release adds support for in-memory SAP HANA databases.
TSM for Virtualization Environments IBM TSM is famous for its patented "Progressive Incremental Backup" which is far more efficient than full+incrementals or full+differentials. IBM now extends this method to VM images. With people consolidating more and more VMs onto fewer host servers, TSM-VE now offers multiple backup streams in parallel. TSM-VE can now take application-aware backups of Microsoft Exchange, SQL Server, and Active Directory running in VMs. TSM-VE will also support vApp and VM templates. If it takes you [a day and a half to build a VMware template], you would want to make sure all that work was backed up, right?
Enhanced Security. Complex password support and improved user authentication and management by integration with Lightweight Directory Access Protocol (LDAP)
This week I am in Orlando, Florida for the IBM Edge conference. Here is a recap of Day 4 afternoon sessions which related to Cloud computing.
IBM SmartCloud Enterprise -- Object Storage
George Contino, IBM GTS Consultant for Cloud Storage Service Enablement, presented IBM's latest Object Storage offering, based on an alliance IBM formed with Nirvanix last October 2011, launched January 31, 2012. It is part of the IBM SmartCloud Enterprise system.
IBM currently has two datacenters for this now, Secaucus NJ and Frankfurt Germany, but will have five by end of 2012, and hopefully seven datacenters by nid-year 2013.
The storage is then divided in several layers:
Customer master account, assigned a 128-bit encryption key
Name spaces by department or LOB
User file objects
The objects are given random names, with the real customer-assigned file names stored elsewhere, to provide additional privacy through obfuscation. For added security, it uses Two-Factor Authentication, requiring the users to provide both the 128-bit encryption key and the password.
There are three ways to access data:
Proprietary API - An API is available on Windows and Linux. Symantec NetBackup, BackupExec and Commvault Simpana have already coded to the Nirvanix API to allow backups to be stored in the Nirvanix storage cloud. IBM InfoSphere Optim can archive data to the Nirvanix storage cloud.
CloudNAS - Nirvanix provides software that provides CIFS and NFS interfaces, that converts to the Nivranix API. IBM Tivoli Storage Manager can send backups and archives to the Nirvanix storage cloud using this approach.
Cloud Storage Gateway - Third parties have developed hardware that runs the CloudNAS software, or directly codes to the API, to provide standard interfaces to the local clients, and provides access to the Nirvanix storage cloud. Two examples were Panzura File System Controller and Twinstrata Cloud Array Gateway.
One of Nirvanix's partners is OxygenCloud, which allows mobile/laptop access to work files. This includes security checks on Active Directory or LDAP, AES-256 bit encryption and HTTPS protocol support. For example, if you had to give a bunch of PDF files to your clients outside your company, you could create a folder, and send out a URL link to the clients, and this link would be valid for the next 14 days for them to download the files.
How University of Wisconsin-Milwaukee (UWM) moved SAP to the Cloud
Maik Gasterstaedt, IBM Technical Enablement for SAP, Storage and Cloud solutions, presented this session on the deployment of an SAP cloud at UWM. Worldwide, SAP has established five University Competency Centers (UCC) to provide SAP cloud services to other universities, and UWM is one of these five UCC.
Basically, the UWM manages SAP instances that are then "rented out" to 107 other universities. An SAP instance represents a "sample company" that could be used in a course curriculum, for example, "Global Bikes, Inc.", "Fitter Snacker", or IDES. An SAP Client represents a fresh copy of the data for this sample company.
UWM charges each University per "SAP client" per semester. Suppose a professor will teach three classes on SAP. He can arrange the SAP clients depending on how much he is willing to spend.
Get one SAP Client to be shared across all three classes. All three classes would be using the same sample company.
Get an SAP Client for each class. Each class could be based on the same or different sample companies.
Get one or more SAP Clients for each class. In this case, for example, a class could get two or more sample companies.
The problem was that they were running on Sun servers approaching end-of-life. They decided to switch to IBM, running 43 SAP Instances on AIX with two Power750 servers, 7 SAP instances on Windows guests of VMware across two BladeCenter chassis using HS22 blades, XIV storage, backed up by Tivoli Storage Manager and Tivoli Storage FlashCopy Manager. They can run 50 SAP clients on each SAP instance. Each client could be rented out to different professors at different universities.
They started installation April 1, and the entire system was running in production by August 15, less than five months end-to-end.
The results were stunning. SAP instance provisioning used to take 5 days, now takes 12 hours. Backups that used to take an hour complets in about 30 seconds.
The conference is almost over folks! Just a few sessions tomorrow and then it is all done.
Continuing my coverage of the 30th annual [Data Center Conference]. here is a recap of Wednesday morning sessions.
A Data Center Perspective on MegaVendors
The morning started with a keynote session. The analyst felt that the eight most strategic or disruptive companies in the past few decades were: IBM, HP, Cisco, SAP, Oracle, Apple and Google. Of these, he focused on the first three, which he termed the "Megavendors", presented in alphabetical order.
Cisco enjoys high-margins and a loyal customer base with Ethernet switch gear. Their new strategy to sell UP and ACROSS the stack moves them into lower-margin business like servers. Their strong agenda with NetApp is not in sync with their partnership with EMC. They recently had senior management turn-over.
HP enjoys a large customer base and is recognized for good design and manufacturing capabilities. Their challenges are mostly organizational, distracted by changes at the top and an untested and ever-changing vision, shifting gears and messages too often. Concerns over the Itanium have not helped them lately.
IBM defies simple description. One can easily recognize Cisco as an "Ethernet Switch" company, HP as a "Printer Company", Oracle as a "Database Company', but you can't say that IBM is an "XYZ" company, as it has re-invented itself successfully over its past 100 years, with a strong focus on client relationships. IBM enjoys high margins, sustainable cost structure, huge resources, a proficient sales team, and is recognized for its innovation with a strong IBM Research division. Their "Smarter Planet" vision has been effective in supporting their individual brands and unlock new opportuties. IBM's focus on growth markets takes advantage of their global reach.
His final advice was to look for "good enough" solutions that are "built for change" rather than "built to last".
Chris works in the Data Center Management and Optimization Services team. IBM owns and/or manages over 425 data centers, representing over 8 million square feet of floorspace. This includes managing 13 million desktops, and 325,000 x86 and UNIX server images, and 1,235 mainframes. IBM is able to pool resources and segment the complexity for flexible resource balancing.
Chris gave an example of a company that selected a Cloud Compute service provided on the East coast a Cloud Storage provider on the West coast, both for offering low rates, but was disappointed in the latency between the two.
Chris asked "How did 5 percent utilization on x86 servers ever become acceptable?" When IBM is brought in to manage a data center, it takes a "No Server Left Behind" approach to reduce risk and allow for a strong focus on end-user transition. Each server is evaluated for its current utilization:
Amazingly, many servers are unused. These are recycled properly.
1 to 19 percent
Workload is virtualized and moved to a new server.
20 to 39 percent
Use IBM's Active Energy Manager to monitor the server.
40 to 59 percent
Add more VMs to this virtualized server.
over 60 percent
Manage the workload balance on this server.
This approach allows IBM to achieve a 60 to 70 percent utilization average on x86 machines, with an ROI payback period of 6 to 18 months, and 2x-3x increase of servers-managed-per-FTE.
Storage is classified using Information Lifecycle Management (ILM) best practices, using automation with pre-defined data placement and movement policies. This allows only 5 percent of data to be on Tier-1, 15 percent on Tier-2, 15 percent on Tier-3, and 65 percent on Tier-4 storage.
Chris recommends adopting IT Service Management, and to shift away from one-off builds, stand-alone apps, and siloed cost management structures, and over to standardization and shared resources.
You may have heard of "Follow-the-sun" but have you heard of "Follow-the-moon"? Global companies often establish "follow-the-sun" for customer service, re-directing phone calls to be handled by people in countries during their respective daytime hours. In the same manner, server and storage virtualization allows workloads to be moved to data centers during night-time hours, following the moon, to take advantage of "free cooling" using outside air instead of computer room air conditioning (CRAC).
Since 2007, IBM has been able to double computer processing capability without increasing energy consumption or carbon gas emissions.
It's Wednesday, Day 3, and I can tell already that the attendees are suffering from "information overload'.
The last keynote session of the [Oracle OpenWorld 2011] conference was Oracle making a few major announcements.
Steve Miranda, Senior VP for Oracle Applications, explained the new "Fusion 11g Apps" which are now generally available. Basically, they took all the scattered applications they have from acquisitions of PeopleSoft, JD Edwards, Siebel and so on, and re-wrote them to industry-standard Java so that they would all run either on-premise or in the Cloud. The Enterprise Apps come in seven categories: Financials like General Ledger and Payroll; Human Capital Management (HCM) formerly known as Human Resources; Supply Chain Management (SCM); Customer Relationship Management (CRM); Governance Risk and Compliance (GRC); Procurement; and Project/Portfolio Management (PPM). Oracle also has "Industry Apps" for specific verticals.
All of these apps have "embedded BI" (business intelligence), such as dashboards, multi-dimensional calculations, decision support, and real-time optimization. This is intended to help the end-user answer four questions:
What do you need to do today?
How to get it done?
What you need to know today?
Who can help you?
Larry Ellison, Oracle CEO, said that it took six years to rewrite all the Fusion Apps. They used an "agile" development model with over 200 early adopters to ensure that these applications were successful. They were under a "controlled release program" but now that is over, and the applications are generally available. Larry indicates that these applications were developed under the concepts of Service Oriented Architecture [SOA], which neither Salesforce.com nor SAP R3 have.
(This made me chuckle. SOA was initially developed by IBM and Microsoft, but is now industry standard. There is no reason not to develop software that isn't SOA.)
Following the IBM model, Oracle has built-in the security at the OS, Database and Middleware layer, rather than in each application. As IBM has understood for several decades, a secure infrastructure is the way to go so that all applications are secure.
With all these Fusion Apps now re-written so that they work on industry-standard Java (J2EE, actually), allowing them to run either on-premise or out on the Cloud, Larry Ellison said "I guess we need a Cloud!" This started his announcement of the "Oracle Public Cloud" [OPC]. OPC has both PaaS and SaaS. The PaaS would offer VM instances with support for database and Java services. The SaaS would be all the Fusion Apps rented on the "as-a-service" model. Rather than force everyone to Oracle 11g, you can run any Oracle database on OPC, and you can run any Java or J2EE application on the OPC.
Your data is portable. Larry is pro-choice, and wants people to be able to move from any cloud to any cloud. Since it's based on industry-standard Java, applications can move seamlessly between OPC, Amazon EC2 and IBM SmartCloud. IBM has been a major force behind [Open Cloud Standards], so it is always good that other major vendors follow suit.
He quoted [someone as saying "Beware of False Clouds"] This was Salesforce.com CEO Marc Benioff's attack against all "Private Cloud" IT vendors. Larry twisted this to say he agrees, "True Clouds" are based on open industry standards, and "False Clouds" are vendor-lockin. OPC is based on Java, J2EE, XML, BPEL and Ruby on Rails, whereas Salesforce.com is based on proprietary Heroku and APEX. He called Salesforce.com the "Roach Motel of Cloud Computing" .. you can check in, but you can't check out.
OPC plans to offer some "data sources", including Dun&Bradstreet news feed, Twitter, Facebook and other social networks. It is based on a monthly subscription using a self-service portal. The resources are elastic, with capacity delivered on demand. He claims that Salesforce.com is rate-limited, and cancels long-running jobs if they are consuming too many resources. Larry said OPC would never do that.
Larry said that there are private-only offerings like SAP R3, and public-only offerings like Salesforce.com, Workday, and Taleo, but Oracle instead has adopted the IBM model of supporting choice between private, public and hybrid clouds.
Larry then attacked "Multi-tenancy", specifically, the idea that SaaS providers often use a single database instance, but then create a column to identify which records belong to which tenants. He said this was state-of-the-art 15 years ago, but is a bad idea now. Too risky. Instead, Larry's OPC has unique database instances for each tenant through virtualization.
Larry also announced the Oracle Social Network (OSN). This is a corporate-version of Facebook, that supports collaboration and file-sharing, similar to IBM [LotusLive], Google Docs, or Microsoft Office365. All of the Fusion Apps are written to interface directly with the OSN or any of these other social networks through APIs. This includes navigation and integrated social networking. He also indicated that all Fusion Apps run on mobile devices. He showed the SAP R3 GUI, and said it reminded him of "the fins on a 1968 Cadillac!"
Larry said that other CRM SaaS focus on helping sales managers track their employees, but Oracle's CRM helps sellers sell more.
He then gave an example of a mythical sales manager Bob, and his sales employee Julian, selling two Exadata boxes for $4.8 Million USD. A "safe harbor" statement was shown at the beginning of this keynote, to make sure nobody asks to buy Exadata boxes this cheap.
During lunch, people were able to take a look at our solutions. Here are Dan Thompson and Brett Cooper striking a pose.
Hyper-Efficient Backup and Recovery
The afternoon was kicked off by Dr. Daniel Sabbah, IBM General Manager of Tivoli software. He started with some shocking statistics: 42 percent of small companies have experienced data loss, 32 percent have lost data forever. IBM has a solution that offers "Unified Recovery Management". This involves a combination of periodic backups, frequent snapshots, and remote mirroring.
IBM Tivoli Storage Manager (TSM) was introduced in 1993, and was the first backup software solution to support backup to disk storage pools. Today, TSM is now also part of Cloud Computing services, including IBM Information Protection Services. IBM announced today a new bundle called IBM Storwize Rapid Application Backup, which combines IBM Storwize V7000 midrange disk system, Tivoli FlashCopy Manager, implementation services, with a full three-year hardware and software warranty. This could be used, for example, to protect a Microsoft Exchange email system with 9000 mailboxes.
IBM also announced that its TS7600 ProtecTIER data deduplication solutions have been enhanced to support many-to-many bi-direction remote mirroring. Last year, University of Pittsburgh Medical Center (UPMC) reported that they were average 24x data deduplication factor in their environment using IBM ProtecTIER.
"You are out of your mind if you think you can live without tape!"
-- Dick Crosby, Director of System Administration, Estes
The new IBM TS1140 enterprise class tape drive process 2.3 TB per hour, and provides a density of 1.2 PB per square foot. The new 3599 tape media can hold 4TB of data uncompressed, which could hold up to 10TB at a 2.5x compression ratio.
The United States Golfers Association [USGA] uses IBM's backup cloud, which manages over 100PB of data from 750 locations across five continents.
Customer Testimonial - Graybar
Randy Miller, Manager of Technical System Administration at Graybar, provided the next client testimonial. Graybar is an employee-owned company focused on supply-chain management, serving as a distributor for electical, lighting, security, power and cooling equipment.
Their problem was that they had 240 different locations, and expecting local staff to handle tape backups was not working out well. They centralized their backups to their main data center. In the event that a system fails in one of their many remote locations, they can rebuild a new machine at their main data center across high-speed LAN, and then ship overnight to the remote location. The result, the remote location has a system up and running by 10:30am, faster than they would have had from local staff trying to figure out how to recover from tape. In effect, Graybar had implemented a "private cloud" for backup in the 1990s, long before the concept was "cool" or "popular".
In 2001, they had an 18TB SAP ERP application data repository. To back this up, they took it down for 1 minute per day, six days a week, and 15 minutes down on Sundays. The result was less than 99.8 percent availability. To fix this, they switched to XIV, and use Snapshots that are non-disruptive and do not impact application performance.
Over 85 percent of the servers at Graybar are virtualized.
Their next challenge is Disaster Recovery. Currently, they have two datacenters, one in St. Louis and the other in Kansas City. However, in the aftermath of Japan's earthquakes, they realize there is a nuclear power plan between their two locations, so a single incident could impact both data centers. They are working with IBM, their trusted advisors, to investigate a three-site solution.
This week, May 15-22, I am in Auckland, New Zealand teaching IBM Storage Top Gun sales class. Next week, I will be in Sydney, Australia.
The "Basic" offering includes a single IBM Storwize V7000 controller enclosure, and three year warranty package that includes software licenses for IBM Tivoli Storage FlashCopy Manager (FCM) and IBM Tivoli Storage Productivity Center for Disk - Midrange Edition (MRE). Planning, configuration and testing services for the software are included and can be performed by either IBM or an IBM Business Partner.
The "Standard" offering allows for multiple IBM Storwize V7000 enclosures, provides three year warranty package for the FCM and MRE software, and includes implementation services for both the hardware and the software components. These services can be performed by IBM or an IBM Business Partner.
Why bundle? Here are the key advantages for these offerings:
Increased storage utilization! First introduced in 2003, IBM SAN Volume Controller is able to improve storage utilization by 30 percent through virtualization and thin provisioning. IBM Storwize V7000 carries on this tradition. Space-efficient FlashCopy is included in this bundle at no additional charge and can reduce the amount of storage normally required for snapshots by 75 percent or more. IBM Tivoli Storage FlashCopy Manager can manage these FlashCopy targets easily.
Improved storage administrator productivity! The new IBM Storwize V7000 Graphical User Interface can help improve administrator productivity up to 2 times compared to other midrange disk solutions. The IBM Tivoli Storage Productivity Center for Disk - Midrange Edition provides real-time performance monitoring for faster analysis time.
Increased application performance! This bundle includes the "Easy Tier" feature at no additional charge. Easy Tier is IBM's implementation of sub-LUN automated tiering between Solid-State Drives (SSD) and spinning disk. Easy Tier can help improve application throughput up to 3 times, and improve response time up to 60 percent. Easy Tier can help meet or exceed application performance levels with its internal "hot spot" analytics.
Increased application availability! IBM Tivoli Storage FlashCopy Manager provides easy integration with existing applications like SAP, Microsoft Exchange, IBM DB2, Oracle, and Microsoft SQL Server. Reduce application downtime to just seconds with backups and restores using FlashCopy. The built-in online migration feature, included at no additional charge, allows you to seamlessly migrate data from your old disk to the new IBM Storwize V7000.
Significantly reduced implementation time! This bundle will help you cut implementation time in half, with little or no impact to storage administrator staff. This will help you realize your return on investment (ROI) much sooner.
Continuing coverage of my week in Washington DC for the annual [2010 System Storage Technical University], I attended several XIV sessions throughout the week. There were many XIV sessions. I could not attend all of them. Jack Arnold, one of my colleagues at the IBM Tucson Executive Briefing Center, often presents XIV to clients and Business Partners. He covered all the basics of XIV architecture, configuration, and features like snapshots and migration. Carlos Lizarralde presented "Solving VMware Challenges with XIV". Ola Mayer presented "XIV Active Data Migration and Disaster Recovery".
Here is my quick recap of two in particular that I attended:
XIV Client Success Stories - Randy Arseneau
Randy reported that IBM had its best quarter ever for the XIV, reflecting an unexpected surge shortly after my blog post debunking the DDF myth last April. He presented successful case studies of client deployments. Many followed a familiar pattern. First, the client would only purchase one or two XIV units. Second, the client would beat the crap out of them, putting all kinds of stress from different workloads. Third, the client would discover that the XIV is really as amazing as IBM and IBM Business Partners have told them. Finally, in the fourth phase, the client would deploy the XIV for mission-critical production applications.
A large US bank holding company managed to get 5.3 GB/sec from a pair of XIV boxes for their analytics environment. They now have 14 XIV boxes deployed in mission-critical applications.
A large equipment manufacturer compared the offerings among seven different storage vendors, and IBM XIV came out the winner. They now have 11 XIV boxes in production and another four boxes for development/test. They have moved their entire VMware infrastructure to IBM XIV, running over 12,000 guest instances.
A financial services company bought their first XIV in early 2009 and now has 34 XIV units in production attached to a variety of Windows, Solaris, AIX, Linux servers and VMware hosts. Their entire Microsoft Exchange was moved from HP and EMC disk to IBM XIV, and experienced noticeable performance improvement.
When a University health system replaced two competitive disk systems with XIV, their data center temperature dropped from 74 to 68 degrees Fahrenheit. In general, XIV systems are 20 to 30 percent more energy efficient per usable TB than traditional disk systems.
A service provider that had used EMC disk systems for over 10 years evaluated the IBM XIV versus upgrading to EMC V-Max. The three year total cost of ownership (TCO) of EMC's V-Max was $7 Million US dollars higher, so EMC counter-proposed CLARiiON CX4 instead. But, in the end, IBM XIV proved to be the better fit, and now the customer is happy having made the switch.
The manager of an information communications technology service provider was impressed that the XIV was up and running in just a couple of days. They now have over two dozen XIV systems.
Another XIV client had lost all of their Computer Room Air Conditioning (CRAC) units for several hours. The data center heated up to 126 degrees Fahrenheit, but the customer did not lose any data on either of their two XIV boxes, which continued to run in these extreme conditions.
Optimizing XIV Performance - Brian Cormody
This session was an update from the [one presented last year] by Izhar Sharon. Brian presented various best practices for optimizing the performance when using specific application workloads with IBM XIV disk systems.
Oracle ASM: Many people allocate lots of small LUNs, because this made sense a long time ago when all you had was just a bunch of disks (JBOD). In fact, many of the practices that DBAs use to configure databases across disks become unnecessary with XIV. Wth XIV, you are better off allocating a few number of very large LUNs from the XIV. The best option was a 1-volume ASM pool with 8MB AU stripe. A single LUN can contain multiple Oracle databases. A single LUN can be used to store all of the logs.
VMware: Over 70 percent of XIV customers use it with VMware. For VMFS, IBM recommends allocating a few number of large LUNs. You can specify the maximum of 2181 GB. Do not use VMware's internal LUN extension capability, as IBM XIV already has thin provisioning and works better to allow XIV to do this for you. XIV Snapshots provide crash-consistent copies without all the VMware overhead of VMware Snapshots.
SAP: For planning purposes, the "SAPS" unit equates roughly to 0.4 IOPS for ERP OLTP workloads, and 0.6 IOPS for BW/BI OLAP workloads. In general, an XIV can deliver 25-30,000 IOPS at 10-15 msec response time, and 60,000 IOPS at 30 msec response time. With SAP, our clients have managed to get 60,000 IOPS at less than 15 msec.
Microsoft Exchange: Even my friends in Redmond could not believe how awesome XIV was during ESRP testing. Five Exchange 2010 servers connected two a pair of XIV boxes using the new 2TB drawers managed 40,000 mailboxes at the high profile (0.15 IOPS per mailbox). Another client found four XIV boxes (720 drives) was able to handle 60,000 mailboxes (5GB max), which would have taken over 4000 drives if internal disk drives were used instead. Who said SANs are obsolete for MS Exchange?
Asynchronous Replication: IBM now has an "Async Calculator" to model and help design an XIV async replication solution. In general, dark fiber works best, and MPLS clouds had the worst results. The latest 10.2.2 microcode for the IBM XIV can now handle 10 Mbps at less than 250 msec roundtrip. During the initial sync between locations, IBM recommends setting the "schedule=never" to consume as much bandwidth as possible. If you don't trust the bandwidth measurements your telco provider is reporting, consider testing the bandwidth yourself with [iPerf] open source tool.