Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Systems Client Experience Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Jim is an IBM Fellow for IBM Systems and Technology Group. There are only 73 IBM Fellows currently working for IBM, and this is the highest honor IBM can bestow on an employee. He has been working with IBM since 1968.
He is tasked with predicting the future of IT, and help drive strategic direction for IBM. Cost pressures, requirements for growth, accelerating innovation and changing business needs help influence this direction.
IBM's approach is to integrate four different "IT building blocks":
Scale-up Systems, like the IBM System Storage DS8000 and TS3500 Tape Library
Resource Pools, such as IBM Storage Pools formed from managed disks by IBM SAN Volume Controller (SVC)
Integrated stacks and appliances, integrated software and hardware stacks, from Storwize V7000 to full rack systems like IBM Smart Analytics Server or CloudBurst.
Mobility of workloads and resources requires unified end-to-end service management. Fortunately, IBM is the #1 leader in IT Service Management solutions.
Jim addressed three myths:
Myth 1: IT Infrastructures will be homogenous.
Jim feels that innovations are happening too rapidly for this to ever happen, and is not a desirable end-goal. Instead, a focus to find the right balance of the IT building blocks might be a better approach.
Myth 2: All of your problems can be solved by replacing everything with product X.
Jim feels that the days of "rip-and-replace" are fading away. As IBM Executive Steve Mills said, "It isn't about the next new thing, but how well new things integrate with established applications and processes."
Myth 3: All IT will move to the Cloud model.
Jim feels a substantial portion of IT will move to the Cloud, but not all of it. There will always be exceptions where the old traditional ways of doing things might be appropriate. Clouds are just one of the many building blocks to choose from.
Jim's focus lately has been finding new ways to take advantage of virtualization concepts. Server, storage and network virtualization are helping address these challenges through four key methods:
Sharing - virtualization that allows a single resource to be used by multiple users. For example, hypervisors allow several guest VM operating systems share common hardware on a single physical server.
Aggregation - virtualization that allows multiple resources to be managed as a single pool. For example, SAN Volume Controller can virtualize the storage of multiple disk arrays and create a single storage pool.
Emulation - virtualization that allows one set of resources to look and feel like a different set of resources. Some hypervisors can emulate different kinds of CPU processors, for example.
Insulation - virtualization that hides the complexity from the end-user application or other higher levels of infrastructure, making it easier to make changes of the underlying managed resources. For example, both SONAS and SAN Volume Controller allow disk capacity to be removed and replaced without disruption to the application.
In today's economy, IT transformation costs must be low enough to yield near-term benefits. The long-term benefits are real, but near-term benefits are needed for projects to get started.
What set's IBM ahead of the pack? Here was Jim's list:
100 Years of Innovation, including being the U.S. Patent leader for the last 18 years in a row
IBM's huge investment in IBM Research, with labs all over the globe
Leadership products in a broad portfolio
Workload-optimized designs with integration from middleware all the way down to underlying hardware
Comprehensive management software for IBM and non-IBM equipment
Clod is an IBM Distinguished Engineer and Chief Technical Strategist for IBM System Storage. His presentation focused on trends and directions in the IT storage industry. Clod started with five workload categories:
To address these unique workload categories, IBM will offer workload-optimized systems. The four drivers on the design for these are performance, efficiency, scalability, and integration. For example, to address performance, companies can adopt Solid-State Drives (SSD). Unfortunately, these are 20 times more expensive dollar-per-GB than spinning disk, and the complexity involved in deciding what data to place on SSD was daunting. IBM solved this with an elegant solution called IBM System Storage Easy Tier, which provides automated data tiering for IBM DS8000, SAN Volume Controller (SVC) and Storwize V7000.
For scalability, IBM has adopted Scale-Out architectures, as seen in the XIV, SVC, and SONAS. SONAS is based on the highly scalable IBM General Parallel File System (GPFS). File systems are like wine, they get better with age. GPFS was introduced 15 years ago, and is more mature than many of the other "scalable file systems" from our competition.
Areal Density advancements on Hard Disk Drives (HDD) are slowing down. During the 1990s, the IT industry enjoyed 60 to 100 percent annual improvement in areal density (bits per square inch). In the 2000s, this dropped to 25 to 40 percent, as engineers are starting to hit various physical limitations.
Storage Efficiency features like compression have been around for a while, but are being deployed in new ways. For example, IBM invented WAN compression needed for Mainframe HASP. WAN compression became industry standard. Then IBM introduced compression on tape, and now compression on tape is an industry standard. ProtecTIER and Information Archive are able to combine compression with data deduplication to store backups and archive copies. Lastly, IBM now offers compression on primary data, through the IBM Real-Time Compression appliance.
For the rest of this decade, IBM predicts that tape will continue to enjoy (at least) 10 times lower dollar-per-GB than the least expensive spinning disk. Disk and Tape share common technologies, so all of the R&D investment for these products apply to both types of storage media.
For integration, IBM is leading the effort to help companies converge their SAN and LAN networks. By 2015, Clod predicts that there will be more FCoE purchased than FCP. IBM is also driving integration between hypervisors and storage virtualization. For example, IBM already supports VMware API for Array Integration (VAAI) in various storage products, including XIV, SVC and Storwize V7000.
Lastly, Clod could not finish a presentation without mentioning Cloud Computing. Cloud storage is expected to grow 32 percent CAGR from year 2010 to 2015. Roughly 10 percent of all servers and storage will be in some type of cloud by 2015.
As is often the case, I am torn between getting short posts out in a timely manner versus spending some more time to improve the length and quality of information, but posted much later. I will spread out the blog posts in consumable amounts throughout the next week or two, to achieve this balance.
I always try to catch a session from Jim Blue, who works in our "SAN Central" center of competency team. This session was a long list of useful hints and tips, based on his many years of experience helping clients.
SAN Zoning works by inclusion, limiting the impact of failing devices. The best approach is to zone by individual initiator port. The default policy for your SAN zoning should be "deny".
Ports should be named to identify who, what, where and how.
While many people know not to mix both disk and tape devices on the same HBA, Jim also recommends not mixing dissimilar disks, test and production, FCP and FICON.
The sweet spot is FOUR paths. Too many paths can impact performance.
When making changes to redundant fabrics, make changes to the first fabric, then allow sufficient time before making the same changes to the other fabric.
Use software tools like Tivoli Storage Productivity Center (Standard Edition) to validate all changes to your SAN fabric.
Do not mix 62.5 and 50.0 micron technology.
Use port caps to disable inactive ports. In one amusing anecdote, he mention that an uncovered port was hit by sunlight every day, sending error messages that took a while to figure out.
Save your SAN configuration to non-SAN storage for backup
Consider firmware about two months old to be stable
Rule of thumb for estimating IOPS: 75-100 IOPS per 7200 RPM drive, 120-150 IOPS per 10K RPM drive, and 150-200 IOPS per 15K RPM drive.
Decide whether your shop is just-in-time or just-in-case provisioning. Just-in-time gets additional capacity on demand as needed, and just-in-case over-provisions to avoid scrambling last minute.
Avoid oversubscribing your inter-switch links (ISL). Aim for around 7:1 to 10:1 ratio.
Don't go cheap on bandwidth between sites for long-distance replication
Next Generation Network Fabrics - Strategy and Innovations
Mike Easterly, IBM Director of Global Field Marketing, presented IBM System Networking strategy, in light of IBM's recent acquisition of Blade Network Technologies (BNT). BNT is used in 350 of the Fortune 500 companies, and is ranked #2 behind Cisco in sales of non-core Ethernet switches (based on number of units sold).
Based on a recent survey, companies are upgrading their Ethernet networks for a variety of reasons:
56 percent for Live Partition Mobility and VMware Vmotion
45 percent for integrated compute stacks, like IBM CloudBurst
43 percent for private, public and hybrid cloud computing deployments
40 percent for network convergences
Many companies adopt a three-level approach, with core directors, distribution switches, and then access switches at the edge that connect servers and storage devices. IBM's BNT allows you to flatten the network to lower latency by collapsing the access and distribution levels into one.
IBM's strategy is to focus on BNT for the access/distribution level, and to continue its strategic partnerships for the core level.
IBM BNT provides better price/performance and lower energy consumption. To help with hot-aisle/cold-aisle rack deployments, IBM BNT provides both F and R models. F models have ports on the front, and R models have ports in the rear.
IBM BNT supports virtual fabric and HW-offload iSCSI traffic, and future-enabled for FCoE. Support for TRILL (transparent interconnect of lots of links) and OpenFlow will be implemented through software updates to the switches.
While Cisco Nexus 1000v is focused on VMware Enterprise Plus, IBM BNT's VMready works with VMware, Hyper-V, Linux KVM, XEN, OracleVM, and PowerVM. This allows single pane of management of VMready and ESX vSwitches.
In preparation for Converged Enhanced Ethernet (CEE), IBM BNT will provide full 40GbE support sometime next year, and offer switches that support 100GbE uplinks. IBM offers extended length cables, including passive SFP+ DAC at 8.5 meters, and 10Gbase-T Cat7 cables up to 100 meters.
Inter-datacenter Workload Mobility with VMware vSphere and SAN Volume Controller (SVC)
This session was co-presented between Bill Wiegand, IBM Advanced Technical Services, and Rawley Burbridge, IBM VMware and midrange storage consultant. IBM is the leader in storage virtualization product (SVC), and is the leading reseller of VMware.
Like MetroCluster on IBM N series, or EMC's VPLEX Metro, the IBM SAN Volume Controller can support a stretched cluster across distance that allows virtual machines to move seamlessly from one datacenter to another. This is a feature IBM introduced with SVC 5.1 back in 2009. This can be used for PowerVM Live Partition Mobility, VMware vMotion, and Hyper-V Quick Migration.
SVC stretched cluster can help with both Disaster Avoidance and Disaster Recovery. For Disaster Avoidance, in anticipation of an outage, VMs can be moved to the secondary datacenter. For Disaster Recover, additional automation, such as VMware High Availability (HA) is needed to restart the VMs at the secondary datacenter.
IBM stretched cluster is further improved with a feature called Volume Mirroring (formerly vDisk Mirroring) which creates two physical copies of one logical volume. To the VMware ESX hosts, there is only one volume, regardless of which datacenter it is in. The two physical copies can be on any kind of managed disk, as there is no requirement or dependency of copy services on the back-end storage arrays.
Another recent improvement is the idea of spreading the three quorum disks to three different locations or "failure domains". One in each data center, and a third one in a separate building, somewhere in between the other two, perhaps.
Of course, there are regional disasters that could affect both datacenters. For this reason, SVC stretched cluster volumes can be replicated to a third location up to 8000 km away. This can be done with any back-end disk arrays, as again there is not requirement for copy services from the managed devices. SVC takes care of it all.
Networking is going to be very important for a variety of transformational projects going forward in the next five years.
The "Storage Symposium Mexico - 2008" conference was a great success this week!
Day 1 - The plan was for me to arrive for the Wednesday night reception. Eachattendee was given a copy of my latest book[Inside System Storage: Volume I] and I was planning to sign them. I thought perhaps we should have a "book signing" tablelike all of the other published authors have.
Things didn't go according to plan. Thunderstorms at the Mexico City airport forced our pilot to find an alternate airport. Nearby Acapulco airport was the logical choice, but was full from all the otherflights, so the plane ended up in a tiny town called McAllen, Texas. I did not arrive until the morning of Day 2,so ended up signing the books throughout Thursday and Friday, during breaks and meals, wherever they couldfind me!
Special thanks to fellow IBMer Ian Henderson who picked me up from the airport at such an awkward hour anddrive me all the way to Cuernavaca!
All of us, IBMers, Business Partners and clients alike, all donned black tee-shirtswith a white eightbar logo for a group photo with one of those "wide lens" cameras. While we werebeing assembled onto the bleachers, I took this quick snapshot of myself and some of the guys behind me.
I was original scheduled to be first to speak, but with my flight delays, was moved to a time slot after lunch.After a big Mexican lunch, the conference coordinators were afraid the attendees might fall asleep,a Mexican tradition called [siesta], so I wasinstructed to WAKE THEM UP! Fortunately, my topic was Information Lifecycle Management, a topicI am very passionate about, since my days working on DFSMS on the mainframe. With 30percent reduction in hardware capital expenditures, 30 percent reduction in operational costs, and typical payback periods between 15 to 24 months, the presentation got everyone's attention.
Of course, a lot happens outside of the formal meetings. We had a Japanese theme dinner, where we woreJapanese Hachimaki [headbands]with the eightbar logo. For those not familiar with Japanese culture, hachimaki are worn today not so much for the practical purpose to catch the perspiration but rather for mental stimulation to express one's determination. Some students wear hachimaki when they study to put themselves in the right spirit and frame of mind.
Shown here are presenters Mike Griese (Infrastructure Management with IBM TotalStorage Productivity Center),Dave Larimer (Backup and Storage Management with IBM Tivoli Storage Manager), myself, and John Hamano(Unified Storage with IBM System Storage N series).
Day 3 - Wrapping up the week, I presented two more times.
First, I covered IBM Disk Virtualization with IBM SAN Volume Controller. One interesting question was if the SAN Volume Controller could be made to looklike a Virtual Tape Library. I explained that this was never part of the original design, but that if you wantto combine SVC with a VTL into a combined disk-and-tape blended solution, consider using theIBM product called Scale-Out File Services[SoFS] which I covered in my post[Moredetails about IBM clustered scalable NAS].
During one of the breaks, I took a picture of the behind-the-scenes staff that put this together. They had created these huge blocks representing puzzle pieces, emphasizing how IBM is one of the few ITvendors that can bring all the pieces together for a complete solution.
Shown hereare Mike Griese (presenter), Cyntia Martinez, Claudia Aviles, Cesar Campos (IBM Business Unit Executive forSystem Storage in Mexico), and Claudia Lopez. Each day the staff wore matching shirts so that it was easyto find them.
Later, I covered Archive and Compliance Solutions to highlight our complete end-to-end set of solutions.When asked to compare and contrast the architectures of the IBM System Storage DR550 with EMC Centera, I explainedthat the DR550 optimizes the use of online disk access for the most recent data. For example, if you aregoing to keep data for 10 years, maybe you keep the most recent 12 months on disk, and the rest is moved,using policy-based automation, to a tape library for the remaining nine years. This means that the disk insidethe DR550 is always being used to read and write the most recent data, the data you are most likely to retrievefrom an archive system. Data older than a year is still accessible, but might take a minute or two for the tapelibrary robot to fetch.The EMC Centera, on the other hand, is a disk-only solution. It offers no option to move older data to tape,nor the option to spin-down the drives to conserve power. It fills up after the same 12 months or so, and then you get towatch it the remaining nine years, consuming electricity and heating your data center.
I don't know about you, butI have never seen anyone purposely put in "space heaters" into their data center, but certainly a full EMC Centeradoes little else. Both devices use SATA drives and support disk mirroring between locations, but IBM DR550 offers dual-parity RAID-6, and supports encryption of the data on both the disk and the tape in the DR550. EMC Centerastill uses only RAID-5, and has not yet, as far as I know, offered any level of encryption. IBM System StorageDR550 was clocked at about three times faster than Centera at ingesting new archive objects over a 1GbE Ethernet connection.
This last photo is me and fellow IBMer Adriana Mondragón. She was one of my students in the [System Storage Portfolio Top Gun class],last February in Guadalajara, Mexico.She graduated in the top 10 percent of her group, earning her the prestigious titleof "Top Gun" storage sales specialist.
The conference wrapped up with a Mexican lunch with a traditional Mariachi band. I took pictures, but figured you allalready know what [Mariachi players] look like, and I didn't wantto detract from the otherwise serious tone of this blog post! This was the first System Storage Symposium in Mexico, butbased on its success, we might continue these annually.
A lot of people ask me about IBM branding, as we have recently changed brands. In the past we had two separate brands, one for servers (eServer) and one for storage (TotalStorage). These would be fine if we wanted to promote their independence, but customers today want synergy between servers and storage, they want systems that work well together.
Last year, in response to market feedback, we crated a new brand, "IBM Systems" and put all the server and storage product lines under one roof. Over time, we will transition from TotalStorage to System Storage naming. This will occur with new products, and major versions of existing products.
Two other phrases you will hear in the names of our offerings are "Virtualization Engine" and "Express". These are portfolio identifiers. The Virtualization Engine identifier was created to emphasize our leadership in system virtualization, and we have products that span product lines with this identifier.
The Express identifier was created to emphasize our focus on Small and Medium sized business (SMB). It spans not just servers and storage, but across other offerings from other IBM divisions.
Of course, just renaming products and services isn't enough. Systems don't work together just because they have similar names, are covered in similar "Apple white" plastic, or have similar black bezels. Obviously, thoughtful and collaborative design are needed, with the appropriate amounts of engineering and testing. IBM is aligning its server and storage development so that the IBM Systems brand keeps its promise.
It has always been the case in fast pace technology areas that you can't tell the players without a program card, andthis is especially true for storage.
When analyzing each acquistion move, you need to think of what is driving it. What are the motives?Having been in the storage business 20 years now, and seen my share of acquisitions, both from within IBM,as well as competition, I have come up with the following list of motives.
Although slavery was abolished in the US back in the 1800's, and centuries earlier everywhere else, many acquisitionsseem to be focused on acquiring the people themselves, rather than the products or client list. I have seen statistics such as "We retained 98% of the people!" In reality, these retentions usually involve costly incentives,sign-in bonuses, stock options, and the like. Desptie this, people leave after a few years, often because ofpersonality or "corporate culture" clash. For example, many former STK employees seem to be leaving after their company was acquired by Sun Microsystems.
If you can't beat them, join them. Acquisitions can often be used by one company to raise its ranking in marketshare, eliminating smaller competitors. And now that you have acquired their client list, perhaps you can sellthem more of your original set of products!
Symantec had acquired Veritas, which in turn had acquired a variety of other smaller players, and the end result is that they are now #1 backup software provider, even though none of theirproducts holds a candle to IBM's Tivoli Storage Manager. Meanwhile, EMC acquired Avamar to try to get more into the backup/recovery game, but most analysts still find EMC down in the #4 or #5 place in this category.
Next month,Brocade's acquisition of McData should take effect, furthering its marketshare in SAN switch equipment.
Prior to my current role as "brand market strategist" for System Storage, I was a "portfolio manager" where wetried to make sure that our storage product line investments were balanced. This was a tough job, as the investmentshad to balance the right development investments into different technologies, including patent portfolios.Despite IBM's huge research budget, I am not surprised that some clever inventions of new technologies comefrom smaller companies, that then get acquired once their results appear viable.
The last motive is value shift. This is where companies try to re-invent themselves, or find that they are stuck in acommodity market rut, and wish to expand into more profitable areas.
LSI Logic acquisition of StoreAge is a good exampleof this. Most of the major storage vendors have already shifted to software and services to provide customer value,as predicted in 1990's by Clayton Christensen in his book "The Innovator's Dilemma". The rest are still strugglingto develop the right strategy, but leaning in this general direction.
The proof-of-concept that IBM Haifa research center developed back in 1998 became what we now call the iSCSI protocol.The book iSCSI: The Universal Storage Connection introduces the history as follows:
In the fall of 1999 IBM and Cisco met to discuss the possibility of combining their SCSI-over-TCP/IP efforts. After Cisco saw IBM's demonstration of SCSI over TCP/IP, the two companies agreed to develop a proposal that would be taken to the IETF for standardization.
There are three ways to introduce iSCSI into your data center:
Through a gateway, like the IBM System Storage N series gateway, that allows iSCSI-based servers connect to FC-based storage devices
Through a SAN switch or director, a FC-based server can access iSCSI-based storage, an iSCSI-based server accessing FC-based storage, or even iSCSI-based servers attaching to iSCSI-based storage.
Directly through the storage controller.
IBM has been delivering the first method with its successful IBM System Storage N series gateway products, buttoday we have announced additional support for the second and third methods.Here's a quick recap.
New SAN director blades
Supporting the second method, IBM TotalStorage SAN256B Director is enhanced to deliver iSCSI functionality with a new M48 iSCSI Blade, which includes 16 ports (8 Fibre Channel ports; and 8 Ethernet ports for iSCSI connectivity). We also announced a new Fibre Channel M48 Blade which provides 10 Gbps Fibre Channel Inter Switch Link (ISL) connectivity between SAN256B Directors.
With support for Boot-over-iSCSI, diskless rack-optimized and blade servers can boot Windows or Linux over Ethernet,eliminating the management hassles with internal disk.
All of this is part of IBM's overall push into the Small and Medium size Business marketplace, making it easier to shop for and buy from IBM and its many IBM Business Partners, easier to deploy and install storage, and easier tomanage the storage once you have it.
Yesterday (September 7, 2006) the Eclipse Foundation announced that it has approved the creation of the Aperi Storage Management Framework Project.
There's been a lot of confusion out there about Aperi, so I thought I would post some facts and opinions about this exciting new project. A few years ago, I was thelead architect for IBM TotalStorage Productivity Center, IBM's infrastructure management product that helped launch the creation of Aperi.
From the latin word for "open", Aperi is an open source project that aims to simplify the management of storage environments, using the Storage Management Initiative - Specification (SMI-S) open standardto promote interoperability and eliminate complexity in today’s storage environments.
Aperi should provide immediate value upon install with basic storage management capabilities, rather than just simply a collection of components that require costly integration. We've discussed requirements for functions such as:
Resource discovery, monitoring, and reporting
Fabric Topology mapping
Disk / Tape management
Device configuration & LUN assignment
SAN fabric management
Basic asset management
The big confusion most people have is Aperi's relation to SMI-S and the Storage Networking Industry Association (SNIA)open standards group. The best way to explain this is to go backto your High School SAT college-entrance exams. Remember questions like this?
(The answer: a crumb is to bread like a splinter is to wood.)
Aperi is an implementation of SMI-S standard, similar to MySQL or PostgreSQL areopen standard relational database implementations of Structured Query Language (SQL).These compete with proprietary database implementations such as IBM DB2 Universal Database,Oracle Database, Microsoft SQL Server, or Sybase.
Aperi: SMI-S :: PostgreSQL : Structured Query Language (SQL)
It is often the case that the folks writing the code are different than the folks defining the standards. This is the case between the members of Aperi writing code, and the members of the SNIA writing standards. IBM happens tohave employees writing Aperi code, and other employees helping define SMI-S standards.What can I say, IBM is a big company and a leader in many areas.
A good analogyis how the Apache community has developed an awesome web server, and the Firefox Mozillacommunity have developed an awesome web browser, both of which are implementations of the HTTP/HTML standards adopted by the World Wide Web Consortium. Apache and Firefoxcompete with proprietary implementations, such as Microsoft Internet Information Services(IIS) web server and Internet Explorer web browser.
Aperi: SNIA :: Apache : World Wide Web (WWW) Consortium
With this arrangement, Aperi and the SNIA will have very complementary roles in defining and driving standards across the entire storage market. To that end, Aperi will make extensive use of the SNIA’s Technology Center and SNIA’s “plugfests” to test the interoperability of the Aperi framework with the variety of 3rd-party storage offerings available. By providing a tested implementation of SMI-S, Aperi will drive broader industry availability of SMI-S, as well as offer the many benefits of an industry-backed open source community.
Check out this vote of confidence:
"Eclipse's Aperi Project will further advance the adoption of SNIA's SMI-S, benefiting the entire storage industry and IT community. Furthermore, the SNIA and Aperi will define plans to collaborate on new storage standards, standards testing programs, and storage interoperability programs." --- Wayne M. Adams, chair, SNIA Board of directors
So, both proprietary and open source implementations have their place in the world.Proprietary products are needed for advanced, unique value-add, and opensource projects are for basic support focused on interoperability and flexibility.These can be combined, for example, proprietary "plug-ins" built on an open source base. The more choices the client has, the better.
Storage vendors benefit too. Vendors are tired of being in the "Y.A.C." business, building "Yet Another Configurator" for each new device developed, with basic functionsto carve LUNs, read performance stats, and so on. By shipping Aperi instead, storagevendors like IBM can invest their development dollars in real innovations, things thatmatter for the customer.
I have created blog categories, based on our System Storage offering matrix, which you can track individually:
Disk systems, including the IBM System Storage DS Family of products, SAN Volume Controller, N series, as well as features unique to these products, such as FlashCopy, MetroMirror, or SnapLock. Tape
Tape systems, including the IBM System Storage TS Family of products, tape-related products in the Virtualization Engine portfolio, drives, libraries and even tape media.
Storage Networking offerings, from Brocade, McData, Cisco and others, such as switches, routers and directors.
Infrastructure management, including IBM TotalStorage Productivity Center software, IBM Tivoli Provisioning Manager, IBM Tivoli Intelligent Orchestrator, and IBM Tivoli Storage Process Manager.
Business Continuity, including IBM Tivoli Storage Manager, Tivoli CDP for Files, Productivity Center for Replication software component, Continuous Availability for Windows (CAW), Continuous Availability for AIX (CAA).
Lifecycle and Retention offerings, including our IBM System Storage DR550, DR550 Express, GPFS, Tivoli Storage Manager Space Management for UNIX, Tivoli Storage Manager HSM for Windows, and DFSMS.
Storage services, including consulting, assessments, design, deployment, management and outsourcing.
I am in Toronto, Canada. It is a lot cold and rainy here, worse than last week in Seoul, Korea.This looks like a slow news week, so slow that the only news here in Canada is the possibility of anew 5-dollar coin. I thought I would make this week's theme about enterprise applications.
IBM doesn't make these applications anymore, we have decided to focus on our core strength, to be the best IT platform to run other people's applications. This means being the best IT systems, software and services company. However, many of the companies that make enterprise applications are both cooperate and compete against parts of IBM, what we call "coopetition".
Let's take a look at some acronyms in this space:
"Enterprise Resource Planning" represents all the basic applications that business need to run theirbusiness, including: finance, accounting, human resources, and manufacturing. The focus here is to streamline operations and make the workforce more productive. Before IBM, I ran my ownsoftware development company, Pearson Kurath Systems, and we developed ERP applications for clients oneby one, customized to their industry requirements.
"Customer Relationship Management" or sometimes "Client Relationship Management" help companies identifyand retain their customer base. Focus here is to increase customer satisfaction and loyalty.
"Supply Chain Management" help track supply and just-in-time inventory demand, sharing the information withkey suppliers and distributors. The focus is to manage inventories down to nothing, and improve speed to get products out to market.
"Business to Business" refer to procurement, purchase orders, and collecting payments over the internet.One of my pet peeves are acronyms that use "2" to mean "to" and "4" to mean "for".
"Human Capital Management" deals with managing costs of Human Resources (HR) and coordinating servicesfrom outside organizations.
"Knowledge Management" refers to sharing and collaborating information. This is not just email and instant messaging, but also online calendaring, experience repositories, client case studies, and anecdotes.
This week I will cover applications that address these, and how they relate to storage.
This year I resolve to be more consistent in my blogging, and my goal is to give you one to five entries per week, every week, based on the advice from Glenn Wolsey, Jennette Banks, and others.On some weeks, I will have a running theme, so rather than super-long entries to cover everything I can think of on a topic, make the entries short and readable. This week is a good time to review last year's "New Year's Resolutions" and to make new ones for 2007. I will discuss actions that companies can adopt for their data centers.
A common resolution is to lose weight, as in this Dilbert comic. Last year, I resolved to lose weight in 2006, and am delighted with myself that I lost eight pounds. When people ask for the secret of my success, I whisper in their ear "Eat less, exercise more." In general, people (and companies) know what to do, but just don't do it, which Pfeffer and Sutton document in their book The Knowing-Doing Gap. In my case, it involved lifestyle change: I exercised at a gym three times per week in Tucson, with a personal trainer, and revamped my diet.
Not everyone subscribes to the "eat less exercise more" philosophy. For example, Ric Watson argues in his blog that you can eat fewer calories, but eat more in actual volume, by choosing the right foods. This brings up the issues of "metrics" that most data centers are familiar with. Last year, I read the book "You: On a Diet" which explains that it is better to focus on "waist reduction" as measured in inches around your mid-section at the belly button, than "weight reduction" as measured in pounds. This year, I resolve to get down to 35 inches by the end of 2007.
The problem with measuring "weight" is that you are weighing bones, muscle and fat. A person can gain ten pounds of muscle, lose ten pounds of fat, and the scale would indicate no progress. The same problem occurs in data centers. How many TB of data do you have? Storage admins can easily tell you, but can they tell how much of this is bone (data needed for operating infrastructure), muscle (data used in daily operations that generates revenue) or fat (obsolete or orphaned data)?
We at IBM often state that "Information Lifecycle Management (ILM)" is more lifestyle change than a "fad diet". Figuring out what data you should capture in the first place, where to place it, when to move it, and when to get rid of it, is more important that just buying different tiers of storage hardware. So, for those looking to make new data center resolutions, I suggest the following actions:
Re-evaluate the metrics you now use, and determine if they are helpful in making decisions and taking action.
Come up with new ones that are more focused to solve the issues you face.
Consider storage infrastructure software, such as IBM TotalStorage Productivity Center, to help you gather the information about your SAN, disk and tape systems, calculate the metrics, and automate the appropriate actions.
Continuing this week's theme of New Year's Resolutions for the data center, today we'll talk about one that people don't always think about on a personal level, that is to hone your tools and skills.
A long time ago, I used to be a regular speaker at the SHARE user group conference. One of the most attended sessions was Sam Golob presenting the latest CBT Tape set of tools. Over time, this large collection of "mainframe shareware" was handed out on 3480 tape cartridges, then on CDs, and finally made downloadable off the web.Sam's main point, which I remember to this day, was that everyone who has a job should figure out what tools they use, keep those tools functioning properly, and learn to use them well.
Later, I took some cooking classes at a culinary school. Among other things, we learned:
A sharp knife is safer and easier to use than a dull one, resulting in fewer accidents
Knowing what you are doing is the difference between food that is "simply awful" to that which is "awfully simple" to prepare.
A well trained chef can prepare most meals with just a sharp knife and wooden spoon.
The same could be said about software tools. What tools do you use in your job? Do you feel you know how to take full advantage of their power and capabilities?If you develop software, do you know all the features for your debugging tools? If you develop advertising or marketing materials, do you know all the features of your photo or video editing software? If you manage storage in a data center, do you know all the tools for managing your storage area network (SAN), disk systems, tape libraries, and reporting tools to identify all of your files and databases across your entire IT environment?I would not be surprised if you could replace a whole mess of tools with just one, such as the IBM TotalStorage Productivity Center.
Mastering the art of stretching out a week-long event into two weeks' worth of blog posts, I continue my
coverage of the [Data Center 2010 conference], Tuesday afternoon I attended several sessions that focused on technologies for Cloud Computing.
(Note: It appears I need to repeat this. The analyst company that runs this event has kindly asked me not to mention their name on this blog, display any of their logos, mention the names of any of their employees, include photos of any of their analysts, include slides from their presentations, or quote verbatim any of their speech at this conference. This is all done to protect and respect their intellectual property that their members pay for. The pie charts included on this series of posts were rendered by Google Charting tool.)
Converging Storage and Network Fabrics
The analysts presented a set of alternative approaches to consolidating your SAN and LAN fabrics. Here were the choices discussed:
Fibre Channel over Ethernet (FCoE) - This requires 10GbE with Data Center Bridging (DCB) standards, what IBM refers to as Converged Enhanced Ethernet (CEE). Converged Network Adapters (CNAs) support FC, iSCSI, NFS and CIFS protocols on a single wire.
Internet SCSI (iSCSI) - This works on any flavor of Ethernet, is fully routable, and was developed in the 1990s by IBM and Cisco. Most 1GbE and all 10GbE Network Interface Cards (NIC) support TCP Offload Engine (TOE) and "boot from SAN" capability. Native suppot for iSCSI is widely available in most hypervisors and operating systems, including VMware and Windows. DCB Ethernet is not required for iSCSI, but can be helpful. Many customers keep their iSCSI traffic in a separate network (often referred to as an IP SAN) from the rest of their traditional LAN traffic.
Network Attached Storage (NAS) - NFS and CIFS have been around for a long time and work with any flavor of Ethernet. Like iSCSI, DCB is not required but can be helpful. NAS went from being for files only, to be used for email and database, and now is viewed as the easiest deployment for VMware. Vmotion is able to move VM guests from one host to another within the same LAN subnet.
Infiniband or PCI extenders - this approach allows many servers to share fewer number of NICs and HBAs. While Infiniband was limited in distance for its copper cables, recent advances now allow fiber optic cables for 150 meter distances.
Interactive poll of the audience offered some insight on plans to switch from FC/FICON to Ethernet-based storage:
Interactive poll of the audience offered some insight on what portion storage is FCP/FICON attached:
Interactive poll of the audience offered some insight on what portion storage is Ethernet-attached:
Interactive poll of the audience offered some insight on what portion of servers are already using some Ethernet-attached storage:
Each vendor has its own style. HP provides homogeneous solutions, having acquired 3COM and broken off relations with Cisco. Cisco offers tight alliances over closed proprietary solutions, publicly partnering with both EMC and NetApp for storage. IBM offers loose alliances, with IBM-branded solutions from Brocade and BNT, as well as reselling arrangements with Cisco and Juniper. Oracle has focused on Infiniband instead for its appliances.
The analysts predict that IBM will be the first to deliver 40 GbE, from their BNT acquisition. They predict by 2014 that Ethernet approaches (NAS, iSCSI, FCoE) will be the core technology for all but the largest SANs, and that iSCSI and NAS will be more widespread than FCoE. As for cabling, the analysts recommend copper within the rack, but fiber optic between racks. Consider SAN management software, such as IBM Tivoli Storage Productivity Center.
The analysts felt that the biggest inhibitor to merging SAN and LANs will be organizational issues. SAN administrators consider LAN administrators like "Cowboys" undisciplined and unwilling to focus on 24x7 operational availability, redundancy or business continuity. LAN administrators consider SAN administrators as "Luddites" afraid or unwilling to accept FCoE, iSCSI or NAS approaches.
Driving Innovation through Innovation
Mr. Shannon Poulin from Intel presented their advancements in Cloud Computing. Let's start with some facts and predictions:
There are over 2.5 billion photos on Facebook, which runs on 30,000 servers
30 billion videos viewed every month
Nearly all Internet-connected devices are either computers or phones
An additional billion people on the Internet
Cars, televisions, and households will also be connected to the Internet
The world will need 8x more network bandwidth, 12x more storage, and 20x more compute power
To avoid confusion between on-premise and off-premise deployments, Intel defines "private cloud" as "single tenant" and "public cloud" as "multi-tenant". Clouds should be
automated, efficient, simple, secure, and interoperable enough to allow federation of resources across providers. He also felt that Clouds should be "client-aware" so that it know what devices it is talking to, and optimizes the results accordingly. For example, if watching video on a small 320x240 smartphone screen, it makes no sense for the Cloud server to push out 1080p. All devices are going through a connected/disconnected dichotomy. They can do some things while disconnected, but other things only while connected to the Internet or Cloud provider.
An internal Intel task force investigated what it would take to beat MIPS and IBM POWER processors and found that their own Intel chips lacked key functionality. Intel plans to address some of their shortcomings with a new chip called "Sandbridge" sometime next year. They also plan a series of specialized chips that support graphics processing (GPU), network processing (NPU) and so on. He also mentioned Intel released "Tukwilla" earlier this year, the latest version of Itanium chip. HP is the last major company to still use Itanium for their servers.
Shannon wrapped up the talk with a discussion of two Cloud Computing initiatives. The first is [Intel® Cloud Builders], a cross-industry effort to build Cloud infrastructures based on the Intel Xeon chipset. The second is the [Open Data Center Alliance], comprised of leading global IT managers who are working together to define and promote data center requirements for the cloud and beyond.
The analysts feel that we need to switch from thinking about "boxes" (servers, storage, networks) to "resources". To this end, they envision a future datacenter where resources are connected to an any-to-any fabric that connects compute, memory, storage, and networking resources as commodities. They feel the current trend towards integrated system stacks is just a marketing ploy by vendors to fatten their wallets. (Ouch!)
A new concept to "disaggregate" caught my attention. When you make cookies, you disaggregate a cup of sugar from the sugar bag, a teaspoon of baking soda from the box, and so on. When you carve a LUN from a disk array, you are disaggregating the storage resources you need for a project. The analysts feel we should be able to do this with servers and network resources as well, so that when you want to deploy a new workload you just disaggregate the bits and pieces in the amounts you actually plan to use and combine them accordingly. IBM calls these combinations "ensembles" of Cloud computing.
Very few workloads require "best-of-breed" technologies. Rather, this new fabric-based infrastructure recognizes the reality that most workloads do not. One thing that IT Data Center operations can learn from Cloud Service Providers is their focus on "good enough" deployment.
This means however that IT professionals will need new skill sets. IT administrators will need to learn a bit of application development, systems integration, and runbook automation. Network adminis need to enter into 12-step programs to stop using Command Line Interfaces (CLI). Server admins need to put down their screwdrivers and focus instead on policy templates.
Whether you deploy private, public or hybrid cloud computing, the benefits are real and worth the changes needed in skill sets and organizational structure.
Continuing my coverage of the Data Center Conference, held Dec 1-4 in Las Vegas, an analyst presented the challenges of managing the rapid growth in storage capacity. Administrators ability to manage storage is not keeping up with the growth. His recommendations:
Aim to just meet but not exceed service level agreements (SLAs)
Revisit past IT decisions. This includes evaluating your SAN to NAS ratio.
Embrace new technologies when they are effective, this includes cloud storage, solid state drives, and interconnect technologies like FCoCEE.
Follow vendor management best practices, update your vendor "short list".
A survey of the audience found:
20 percent have a single external storage vendor
39 percent have two external storage vendors
18 percent have three external storage vendors
23 percent have four or more external storage vendors
Throughout the industry, storage vendors are following IBM's example of using commodity hardware parts. This is because custom ASICs are expensive, and changes take a minimum of three months development time. Software-based implementations can be updated more quickly.
In terms of technologies deployed of SAN, NAS, Compliance Archive (such as the IBM Information Archive), and Virtual Tape Library (VTL) such as the IBM TS7650 ProtecTIER data deduplications solution, here was the survey of the audience:
8 percent: SAN only
14 percent: SAN and NAS
23 percent: SAN, NAS and Compliance Archive
9 percent: SAN and VTL
14 percent: SAN, NAS and VTL
32 percent: SAN, NAS, Compliance Archive and VTL
Cost reduction techniques including thin provisioning, compression, data deduplication, Quality of Service tiers, and archiving. To reduce power and cooling requirements, switch from FC to SATA disk wherever possible, and move storage out of the data center, such as on tape cartridges or cloud storage.
For emerging technologies, the following survey:
16 percent have already implemented a new emerging technology (IBM XIV, Pillar, 3PAR, etc.)
30 percent plan to do so in 12-24 months
4 percent plan to do so in 24-48 months
50 percent have no plans, and will continue to stick with traditional storage technologies
As for adopting Cloud storage, here was the survey:
14 percent already have
31 percent plan to use Cloud storage in 12-24 months
13 percent plan to use Cloud storage in 24-48 months
42 percent have no plans to adopt Cloud storage
My take-away from this is that many companies are still "exploring" into different options available to them. Fortunately, IBM offers a broad portfolio of complete end-to-end solutions to make acquiring the right mix of technologies that are optimized for your workloads possible.
I am back at "the Office" for a single day today. This happens often enough I need a name for it.Air Force pilots that practice landing and take-offs call them "Touch and Go", but I think I needsomething better. If you can think of a better phrase, let me know.
This week, I was in Hartford, CT, Somers, NY and our Corporate Headquarters in Armonk, in a varietyof meetings, some with editors of magazines, others with IBMers I have only spoken to over the phone andfinally got a chance to meet face to face.
I got back to Tucson last night, had meetings this morning in Second Life, then presented "InformationLifecycle Management" in Spanish to a group of customers from Mexico, Chile, and Brazil. We have a great Tucson Executive Briefing Center, and plenty of foreign-language speakers to draw from our localemployees here at the lab site.
Sunday, I leave for Las Vegas for our upcoming IBM Storage and Storage Networking Symposium. We will cover the latest in our disk, tape, storage networking and related software.Do you have your tickets? If you plan to attend, and want to meet up with me, let me know.
Yesterday's announcement that IBM had acquired XIV to offer storage for Web 2.0 applicationsprompted a lot of discussion in both the media and the blogosphere. Several indicated thatit was about time that one of the major vendors stepped forward to provide this, and it madesense that IBM, the leader in storage hardware marketshare, would be the first. Others were perhaps confused on what is unique with Web 2.0 applications. What has changed?
I'll use this graphic to help explain how we have transitioned through three eras of storage.
The first era: Server-centric
In the 1950s, IBM introduced both tape and disk systems into a very server-centric environment.Dumb terminals and dumb storage devices were managed entirely by the brains inside the server.These machines were designed for Online Transaction Processing (OLTP), everywhere from bookingflights on airlines to handling financial transfers.
The second era: Network-centric
In the 1980s and 1990s, dumb terminals were replaced with smarter workstations and personalcomputers; and dumb storage were replaced with smarter storage controllers. Local Area Networks (LANs)and Storage Area Networks (SANs) allowed more cooperative processing between users, servers andstorage. However, servers maintained their role as gatekeepers. Users had to go through aspecific server or server cluster to access the storage they had access to. These servers continuedtheir role in OLTP, but also manage informational databases, file sharing and web serving.
The third era: Information-centric
Today, we are entering a third era. Servers are no longer the gatekeepers. Smart workstationsand personal computers are now supplemented with even more intelligent handheld devices, Blackberryand iPhones, for example. Storage is more intelligent too, with some being able to offer file sharingand web serving directly, without the need of an intervening server. The roles of servers have changed,from gatekeepers, to ones that focuses on crunching the numbers, and making information presentableand useful.
Here is where Web 2.0 applications, digital media and archives fits in. These are focused on unstructured data that don't require relational database management systems. So long as the useris authorized, subscribed and/or has made the appropriate payment, she can access the information. With the appropriate schemes in place, information can now be mashed-up in a variety of ways, combined with other information that can render insights and help drive new innovations.
Of course, we will still have databases and online transaction processing to book our flights andtransfer our funds, but this new era brings in new requirements for information storage, and newarchitectures that help optimize this new approach.
In case you haven't noticed, IBM System Storage makes most of their announcements on Tuesdays. IBM announced a lot today, so here is a quick run-down.
Cisco storage networking products
IBM continues to resell Cisco switches and directors, but now can offer these with a 1-year IBM warranty.
The entry-level Cisco 9124offers 8 to 24 ports. For IBM BladeCenter, IBM now offers the Cisco10-port and 20-port modules that slide into the back of the chassis, and are functionally equivalent to the 9124.The original BladeCenter came with a 16-port module with 14 internal, but only 2 external, which severely hamperedbandwidth connectivity to external storage. These new modules provide more external ports to relieve that constraint.
The midrange Cisco9200switches have two models, both with 16 fixed ports, with the option for a blade that can provide 12, 24 or 48 additional ports. The 9216A has 16 FCP ports, and the 9216i has 14 FCP ports, and 2 GbE ports to act as a router, such as toconnect to a remote location for business continuity using Metro Mirror or Global Mirror.
The enterprise-class Cisco 9500directors can support up to 528 ports.
TS3400 Tape Library
The new TS3400library is a small entry-level size library, supporting the enterprise-class TS1120 drive, providing interoperabilitywith the larger tape libraries, with all the support for tape encryption.
In addition to Linux, Unix, and WIndows, the TS1120 can now be connected to System i servers. In the past, the only IBMtape available to System i were the LTO models. There are a lot of businesses that need to comply with government regulations that are looking for tape encryption, and now IBM has made it accessible to more clients.
300GB drives at 15K RPM
The DS8000 can now support new drives with 300GB capacity at 15,000 RPM (15K). These can be up to 30 percent faster than the 10,000 RPM drives for typical workloads.
IBM continues its market leadership with these new set of features and offerings!
Well, this week I am in Maryland, just outside of Washington DC. It's a bit cold here.
Robin Harris over at StorageMojo put out this Open Letter to Seagate, Hitachi GST, EMC, HP, NetApp, IBM and Sun about the results of two academic papers, one from Google, and another from Carnegie Mellon University (CMU). The papers imply that the disk drive module (DDM) manufacturers have perhaps misrepresented their reliability estimates, and asks major vendors to respond. So far, NetAppand EMC have responded.
I will not bother to re-iterate or repeat what others have said already, but make just a few points. Robin, you are free to consider this "my" official response if you like to post it on your blog, or point to mine, whatever is easier for you. Given that IBM no longer manufacturers the DDMs we use inside our disk systems, there may not be any reason for a more formal response.
Coke and Pepsi buy sugar, Nutrasweet and Splenda from the same sources
Somehow, this doesn't surprise anyone. Coke and Pepsi don't own their own sugar cane fields, and even their bottlers are separate companies. Their job is to assemble the components using super-secret recipes to make something that tastes good.
IBM, EMC and NetApp don't make DDMs that are mentioned in either academic study. Different IBM storage systems uses one or more of the following DDM suppliers:
Seagate (including Maxstor they acquired)
Hitachi Global Storage Technologies, HGST (former IBM division sold off to Hitachi)
In the past, corporations like IBM was very "vertically-integrated", making every component of every system delivered.IBM was the first to bring disk systems to market, and led the major enhancements that exist in nearly all disk drives manufactured today. Today, however, our value-add is to take standard components, and use our super-secret recipe to make something that provides unique value to the marketplace. Not surprisingly, EMC, HP, Sun and NetApp also don't make their own DDMs. Hitachi is perhaps the last major disk systems vendor that also has a DDM manufacturing division.
So, my point is that disk systems are the next layer up. Everyone knows that individual components fail. Unlike CPUs or Memory, disks actually have moving parts, so you would expect them to fail more often compared to just "chips".
If you don't feel the MTBF or AFR estimates posted by these suppliers are valid, go after them, not the disk systems vendors that use their supplies. While IBM does qualify DDM suppliers for each purpose, we are basically purchasing them from the same major vendors as all of our competitors. I suspect you won't get much more than the responses you posted from Seagate and HGST.
American car owners replace their cars every 59 months
According to a frequently cited auto market research firm, the average time before the original owner transfers their vehicle -- purchased or leased -- is currently 59 months.Both studies mention that customers have a different "definition" of failure than manufacturers, and often replace the drives before they are completely kaput. The same is true for cars. Americans give various reasons why they trade in their less-than-five-year cars for newer models. Disk technologies advance at a faster pace, so it makes sense to change drives for other business reasons, for speed and capacity improvements, lower power consumption, and so on.
The CMU study indicated that 43 percent of drives were replaced before they were completely dead.So, if General Motors estimated their cars lasted 9 years, and Toyota estimated 11 years, people still replace them sooner, for other reasons.
At IBM, we remind people that "data outlives the media". True for disk, and true for tape. Neither is "permanent storage", but rather a temporary resting point until the data is transferred to the next media. For this reason, IBM is focused on solutions and disk systems that plan for this inevitable migration process. IBM System Storage SAN Volume Controller is able to move active data from one disk system to another; IBM Tivoli Storage Manager is able to move backup copies from one tape to another; and IBM System Storage DR550 is able to move archive copies from disk and tape to newer disk and tape.
If you had only one car, then having that one and only vehicle die could be quite disrupting. However, companies that have fleet cars, like Hertz Car Rentals, don't wait for their cars to completely stop running either, they replace them well before that happens. For a large company with a large fleet of cars, regularly scheduled replacement is just part of doing business.
This brings us to the subject of RAID. No question that RAID 5 provides better reliability than having just a bunch of disks (JBOD). Certainly, three copies of data across separate disks, a variation of RAID 1, will provide even more protection, but for a price.
Robin mentions the "Auto-correlation" effect. Disk failures bunch up, so one recent failure might mean another DDM, somewhere in the environment, will probably fail soon also. For it to make a difference, it would (a) have to be a DDM in the same RAID 5 rank, and (b) have to occur during the time the first drive is being rebuilt to a spare volume.
The human body replaces skin cells every day
So there are individual DDMs, manufactured by the suppliers above; disk systems, manufactured by IBM and others, and then your entire IT infrastructure. Beyond the disk system, you probably have redundant fabrics, clustered servers and multiple data paths, because eventually hardware fails.
People might realize that the human body replaces skin cells every day. Other cells are replaced frequently, within seven days, and others less frequently, taking a year or so to be replaced. I'm over 40 years old, but most of my cells are less than 9 years old. This is possible because information, data in the form of DNA, is moved from old cells to new cells, keeping the infrastructure (my body) alive.
Our clients should approach this in a more holistic view. You will replace disks in less than 3-5 years. While tape cartridges can retain their data for 20 years, most people change their tape drives every 7-9 years, and so tape data needs to be moved from old to new cartridges. Focus on your information, not individual DDMs.
What does this mean for DDM failures. When it happens, the disk system re-routes requests to a spare disk, rebuilding the data from RAID 5 parity, giving storage admins time to replace the failed unit. During the few hours this process takes place, you are either taking a backup, or crossing your fingers.Note: for RAID5 the time to rebuild is proportional to the number of disks in the rank, so smaller ranks can be rebuilt faster than larger ranks. To make matters worse, the slower RPM speeds and higher capacities of ATA disks means that the rebuild process could take longer than smaller capacity, higher speed FC/SCSI disk.
According to the Google study, a large portion of the DDM replacements had no SMART errors to warn that it was going to happen. To protect your infrastructure, you need to make sure you have current backups of all your data. IBM TotalStorage Productivity Center can help identify all the data that is "at risk", those files that have no backup, no copy, and no current backup since the file was most recently changed. A well-run shop keeps their "at risk" files below 3 percent.
So, where does that leave us?
ATA drives are probably as reliable as FC/SCSI disk. Customers should chose which to use based on performance and workload characteristics. FC/SCSI drives are more expensive because they are designed to run at faster speeds, required by some enterprises for some workloads. IBM offers both, and has tools to help estimate which products are the best match to your requirements.
RAID 5 is just one of the many choices of trade-offs between cost and protection of data. For some data, JBOD might be enough. For other data that is more mission critical, you might choose keeping two or three copies. Data protection is more than just using RAID, you need to also consider point-in-time copies, synchronous or asynchronous disk mirroring, continuous data protection (CDP), and backup to tape media. IBM can help show you how.
Disk systems, and IT environments in general, are higher-level concepts to transcend the failures of individual components. DDM components will fail. Cache memory will fail. CPUs will fail. Choose a disk systems vendor that combines technologies in unique and innovative ways that take these possibilities into account, designed for no single point of failure, and no single point of repair.
So, Robin, from IBM's perspective, our hands are clean. Thank you for bringing this to our attention and for giving me the opportunity to highlight IBM's superiority at the systems level.
Many people have asked me if there was any logic with the IBM naming convention of IBM Systems branded servers. Here's your quick and easy cheat sheet:
System x -- "x" for cross-platform architecture. Technologies from our mainframe and UNIX servers were brought into chips that sit next to the Intel or AMD processors to provide a more reliable x86 server experience. For example, some models have a POWER processor-based Remote Supervisor Adapter (RSA).
System p -- "p" for POWER architecture.
System z -- "z" for Zero-downtime, zero-exposures. Our lawyers prefer "near-zero", but this is about as close as you get to ["six-nines" availability] in our industry, with the highest level of security and encryption, no other vendor comes close, so you get the idea.
But what about the "i" for System i? Officially, it stands for "Integrated" in that it could integrate different applications running on different operating systems onto a [COMMON] platform. Options were available to insert Intel-based processor cards that ran Windows, or attach special cables that allowed separate System x servers running Windows to attach to a System i. Both allowed Windows applications to share the internal LAN and SAN inside the System i machine. Later, IBM allowed [AIX on System i] and [Linux on Power] operating systems to run as well.
From a storage perspective, we often joked that the "i" stood for "island", as most System i machines used internal disk, or attached externally to only a fewselected models of disk from IBM and EMC that had special support for i5/OS using a special, non-standard 520-byte disk block size. This meant only our popular IBM System Storage DS6000 and DS8000 series disk systems were available. This block size requirement only applies to disk. For tape, i5/OS supports both IBM TS1120 and LTO tape systems. For the most part,System i machines stood separate from the mainframe, and the rest of the Linux, UNIX and Windows distributed serverson the data center floor.
Often, when I am talking to customers, they ask when will product xyz be supported on System z or System i?I explained that IBM's strategy is not to make all storage devices connect via ESCON/FICON or support non-standard block sizes, but rather to get the servers to use standard 512-byte block size, Fibre Channel and other standard protocols.(The old adage applies: If you can't get Mohamed to move to the mountain, get the mountain to move to Mohamed).
On the System z mainframe, we are 60 percent there, allowing three of the five operating systems (z/VM, z/VSE and Linux) to access FCP-based disk and tape devices. (Four out of six if you include [OpenSolaris for the mainframe])But what about System i? As the characters on the popular television show [LOST] would say: It's time to get off the island!
Last week, IBM announced the new [i5/OS V6R1 operating system] with features that will greatly improve the use of external storage on this platform. Check this out:
POWER6-based System i 570 model server
Our latest, most powerful POWER processor brought to the System i platform. The 570 model will be the first in the System i family of servers to make use of new processing technology, using up to 16 (sixteen!) POWER6 processors (running at 4.7GHZ) in each machine.The advantage of the new processors is the increased commercial processing workload (CPW) rating, 31 percent greater than the POWER5+ version and 72 percent greater than the POWER5 version. CPW is the "MIPS" or "TeraFlops" rating for comparing System i servers.Here is the[Announcement Letter].
Fibre Channel Adapter for System i hardware
That's right, these are [Smart IOAs], so an I/O Processor (IOP) is no longer required! You can even boot the Initial Program Load (IPL) direclty from SAN-attached tape.This brings System i to the 21st century for Business Continuity options.
Virtual I/O Server (VIOS)
[VirtualI/O Server] has been around for System p machines, but now available on System i as well. This allows multiplelogical partitions (LPARs) to access resources like Ethernet cards and FCP host bus adapters. In the case of storage, the VIOS handles the 520-byte to 512-byte conversion, so that i5/OS systems can now read and write to standard FCP devices like the IBM System Storage DS4800 and DS4700 disk systems.
IBM System Storage DS4000 series
Initially, we have certified DS4700 and DS4800 disk systems to work with i5/OS, but more devices are in plan.This means that you can now share your DS4700 between i5/OS and your other Linux, UNIX and Windowsservers, take advantage of a mix of FC and SATA disk capacities, RAID6 protection, and so on.
To call [IBM PowerVM] the "VMware for the POWER architecture" would not do it quite justice. In combination with VIOS, IBM PowerVM is able to run a variety of AIX, Linux and i5/OS guest images.The "Live Partition Mobility" feature allows you to easily move guest images from one system to another, while they are running, just like VMotion for x86 machines.
And while we are on the topic of x86, PowerVM is also able to represent a Linux-x86 emulation base to run x86-compiled applications. While many Linux applications could be re-complied from source code for the POWER architecture "as is", others required perhaps 1-2 percent modification to port them over, and that was too much for some software development houses. Now, we can run most x86-compiled Linux application binaries in their original form on POWER architecture servers.
BladeCenter JS22 Express
The POWER6-based [JS22 Express blade] can run i5/OS, taking advantage of PowerVM and VIOS to access all of the BladeCenterresources. The BladeCenter lets you mix and match POWER and x86-based blades in the same chassis, providing theultimate in flexibility.
While most of the post is accurate and well-stated, two opinions particular caught my eye. I'll be nice and call them opinions, since these are blogs, and always subject to interpretation. I'll put quotes around them so that people will correctly relate these to Hu, and not me.
"Storage virtualization can only be done in a storage controller. Currently Hitachi is the only vendor to provide this." -- Hu Yoshida
Hu, I enjoy all of your blog entries, but you should know better. HDS is fairly new-comer to the storage virtualization arena, so since IBM has been doing this for decades, I will bring you and the rest of the readers up to speed. I am not starting a blog-fight, just want to provide some additional information for clients to consider when making choices in the marketplace.
First, let's clarify the terminology. I will use 'storage' in the broad sense, including anything that can hold 1's and 0's, including memory, spinning disk media, and plastic tape media. These all have different mechanisms and access methods, based on their physical geometry and characteristics. The concept of 'virtualization' is any technology that makes one set of resources look like another set of resources with more preferable characteristics, and this applies to storage as well as servers and networks. Finally, 'storage controller' is any device with the intelligence to talk to a server and handle its read and write requests.
Second, let's take a look at all the different flavors of storage virtualization that IBM has developed over the past 30 years.
IBM introduces the S/370 with the OS/VS1 operating system. "VS" here refers to virtual storage, and in this case internal server memory was swapped out to physical disk. Using a table mapping, disk was made to look like an extension of main memory.
IBM introduces the IBM 3850 Mass Storage System (MSS). Until this time, programs that ran on mainframes had to be acutely aware of the device types being written, as each device type had different block, track and cylinder sizes, so a program written for one device type would have to be modified to work with a different device type. The MSS was able to take four 3350 disks, and a lot of tapes, and make them look like older 3330 disks, since most programs were still written for the 3330 format. The MSS was a way to deliver new 3350 disk to a 3330-oriented ecosystem, and greatly reduce the cost by handling tape on the back end. The table mapping was one virtual 3330 disk (100 MB) to two physical tapes (50 MB each). Back then, all of the mainframe disk systems had separate controllers. The 3850 used a 3831 controller that talked to the servers.
IBM invents Redundant Array of Independent Disk (RAID) technology. The table mapping is one or more virtual "Logical Units" (or "LUNs") to two or more physical disks. Data is striped, mirrored and paritied across the physical drives, making the LUNs look and feel like disks, but with faster performance and higher reliability than the physical drives they were mapped to. RAID could be implemented in the server as software, on top or embedded into the operating system, in the host bus adapter, or on the controller itself. The vendor that provided the RAID software or HBA did not have to be the same as the vendor that provided the disk, so in a sense, this avoided "vendor lock-in".Today, RAID is almost always done in the external storage controller.
IBM introduces the Personal Computer. One of the features of DOS is the ability to make a "RAM drive". This is technology that runs in the operating system to make internal memory look and feel like an external drive letter. Applications that already knew how to read and write to drive letters could work unmodified with these new RAM drives. This had the advantage that the files would be erased when the system was turned off, so it was perfect for temporary files. Of course, other operating systems today have this feature, UNIX has a /tmp directory in memory, and z/OS uses VIO storage pools.
This is important, as memory would be made to look like disk externally, as "cache", in the 1990s.
IBM AIX v3 introduces Logical Volume Manager (LVM). LVM maps the LUNs from external RAID controllers into virtual disks inside the UNIX server. The mapping can combine the capacity of multiple physical LUNs into a large internal volume. This was all done by software within the server, completely independent of the storage vendor, so again no lock-in.
IBM introduces the Virtual Tape Server (VTS). This was a disk array that emulated a tape library. A mapping of virtual tapes to physical tapes was done to allow full utilization of larger and larger tape cartridges. While many people today mistakenly equate "storage virtualization" with "disk virtualization", in reality it can be implemented on other forms of storage. The disk array was referred to as the "Tape Volume Cache". By using disk, the VTS could mount an empty "scratch" tape instantaneously, since no physical tape had to be mounted for this purpose.
Contradicting its "tape is dead" mantra, EMC later developed its CLARiiON disk library that emulates a virtual tape library (VTL).
IBM introduces the SAN Volume Controller. It involves mapping virtual disks to manage disks that could be from different frames from different vendors. Like other controllers, the SVC has multiple processors and cache memory, with the intelligence to talk to servers, and is similar in functionality to the controller components you might find inside monolithic "controller+disk" configurations like the IBM DS8300, EMC Symmetrix, or HDS TagmaStore USP. SVC can map the virtual disk to physical disk one-for-one in "image mode", as HDS does, or can also map virtual disks across physical managed disks, using a similar mapping table, to provide advantages like performance improvement through striping. You can take any virtual disk out of the SVC system simply by migrating it back to "image mode" and disconnecting the LUN from management. Again, no vendor lock-in.
The HDS USP and NSC can run as regular disk systems without virtualization, or the virtualization can be enabled to allow external disks from other vendors. HDS usually counts all USP and NSC sold, but never mention what percentage these have external disks attached in virtualization mode. Either they don't track this, or too embarrassed to publish the number. (My guess: single digit percentage).
Few people remember that IBM also introduced virtualization in both controller+disk and SAN switch form factors. The controller+disk version was called "SAN Integration Server", but people didn't like the "vendor lock-in" having to buy the internal disk from IBM. They preferred having it all external disk, with plenty of vendor choices. This is perhaps why Hitachi now offers a disk-less version of the NSC 55, in an attempt to be more like IBM's SVC.
IBM also had introduced the IBM SVC for Cisco 9000 blade. Our clients didn't want to upgrade their SAN switch networking gear just to get the benefits of disk virtualization. Perhaps this is the same reason EMC has done so poorly with its "Invista" offering.
So, bottom line, storage virtualization can, and has, been delivered in the operating system software, in the server's host bus adapter, inside SAN switches, and in storage controllers. It can be delivered anywhere in the path between application and physical media. Today, the two major vendors that provide disk virtualization "in the storage controller" are IBM and HDS, and the three major vendors that provide tape virtualization "in the storage controller" are IBM, Sun/STK, and EMC. All of these involve a mapping of logical to physical resources. Hitachi uses a one-for-one mapping, whereas IBM additionally offers more sophisticated mappings as well.