Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Well, it's Tuesday again, and you know what that means! IBM Announcements!
Today, IBM announced its latest IBM Tivoli Key Lifecycle Manager (TKLM) 2.0 version. Here's a quick recap:
Centralized Key Management
Centralized and simplified encryption key management through Tivoli Key Lifecycle Manager's lifecycle of creation, storage, rotation, and protection of encryption keys and key serving through industry standards. TKLM is available to manage the encryption keys for LTO-4, LTO-5, TS1120 and TS1130 tape drives enabled for encryption, as well as DS8000 and DS5000 disk systems using Full Disk Encryption (FDE) disk drives.
Partitioning of Access Control for Multitenancy
Access control and partitioning of the key serving functions, including end-to-end authentication of encryption clients and security of exchange of encryption keys, such that groups of devices have different sets of encryption keys with different administrators. This enables [multitenancy] or multilayer security of a shared infrastructure using encryption as an enforcement mechanism for access control. As Information Technology shifts from on-premises to the cloud, multitenancy will become growingly more important.
Support for KMIP 1.0 Standard
Support for the new key management standard, Key Management Interoperability Protocol (KMIP), released through the Organization for the Advancement of Structured Information Standards [OASIS]. This new standard enables encryption key management for a wide variety of devices and endpoints. See the
[22-page KMIP whitepaper] for more information.
As much as I like to poke fun at Oracle, with hundreds of their Sun/StorageTek clients switching over to IBM tape solutions every quarter, I have to give them kudos for working cooperatively with IBM to come up with this KMIP standard that we can both support.
Support for non-IBM devices from Emulex, Brocade and LSI
Support for IBM self-encrypting storage offerings as well as suppliers of IT components which support KMIP, including a number of supported non-IBM devices announced by business partners such as Emulex, Brocade, and LSI. KMIP support permits you to deploy Tivoli Key Lifecycle Manager without having to worry about being locked into a proprietary key management solution. If you are a client with multiple "Encryption Key Management" software packages, now is a good time to consolidate onto IBM TKLM.
Role-based access control for administrators that allows multiple administrators with different roles and permissions to be defined, helping increase the security of sensitive key management operations and better separation of duties. For example, that new-hire college kid might get a read-only authorization level, so that he can generate reports, and pack the right tapes into cardboard boxes. Meanwhile, for that storage admin who has been running the tape operations for the past ten years, she might get full access. The advantage of role-based authorization is that for large organizations, you can assign people to their appropriate roles, and you can designate primary and secondary roles in case one has to provide backup while the other is out of town, for example.
This year marks the 10 year anniversary of IBM's introduction of LTO tape technology. IBM is a member of the Linear Tape Open consortium which consists of IBM, HP and Quantum, referred to as "Technology Provider Companies" or TPCs. In an earlier job role, I was the "portfolio manager" for both LTO and Enterprise tape product lines.
Today, we held a celebration in Tucson, with cake and refreshments.
IBM Executives Doug Balog, IBM VP of Storage Platform, and Sanjay Tripathi, the new IBM Director and Business Line Executive for Tape, VTL and Archive systems, presented the successes of LTO tape over the past 10 years.
To date over 3.5 million LTO tape drives, and over 150 million LTO tape media cartridges have been shipped which is a testament to the remarkable marketplace acceptance of the technology.
In honor of this event, I decided to interview Bruce Master, IBM Senior Program Manager for Data Protection Systems, about this 10 year anniversary.
10 years of LTO technology is a great milestone. How is this especially significant to IBM and its clients?
According to IDC data, IBM has held the #1 leader position in market share for total world wide branded tape revenue for over 7 years and that IBM is still #1 in branded midrange tape revenue which includes the LTO tape technologies. IBM was the first drive manufacturer to deliver LTO-1 drives, back in September 2000, the first to deliver tape drive encryption to the marketplace on LTO-4 drives, and is shipping LTO generation 5 drives and libraries. IBM is the author of the new Linear Tape File System (LTFS) specification that has been adopted by the TPCs. This file system revolutionizes how tape can be used as if it were a giant 1.5 terabyte removable USB memory stick with the capability to be accessed with directory tree structures and drag and drop functionality. With LTO's built-in real-time compression, a single tape cartridge can hold up to 3TB of data.
The Linear Tape File System has been getting a lot of attention. Where can we learn more about it?
Why is tape still a critical part of a storage infrastructure?
Tape is low cost and provides critical off-line portable storage to help protect data from attacks that can occur with on-line data. For instance, on-line data is at risk of attack from a virus, hacker, system error, disgruntled employee, and more. Since tape is off-line, not accessible by the system, it protects against these forms of corruption. LTO technology also provides write-once read-many (WORM) tape media to help address compliance issues that specify non-erasable, non-rewriteable (NENR) storage, hardware encryption to secure data, as well as a low cost long term archive media. When data cools off, or becomes infrequently accessed, why keep it on spinning disk? Move it to tape where it is much greener and lower cost. A tape in a slot on a shelf consumes minimal energy.
So tape is not dead?
Ha! Far from it. Seems like disk-only "specialty shop" storage vendors that don’t have tape in their sales portfolio are the ones that propagate that myth. In reality, storage managers are tasked with meeting complex objectives for performance, compliance, security, data protection, archive and total cost of ownership. Optimally, a blend of disk and tape in a tiered infrastructure can best address these objectives. You can’t build a house with just a hammer. IBM has a rich tool kit of storage offerings including disk, tape, software, services and deduplication technologies to help clients address their needs.
Do you have an example of a client who was saved by tape?
Yes indeed. Estes Express, a large trucking firm, was hit by a hurricane that flooded their data center and destroyed all systems. Fortunately the company survived because the night before they had backed up all data on to IBM tape and moved the cartridges offsite! The company survived and has since implemented a best practices data protection strategy with a combination of disk-to-disk-to-tape (D2D2T) using LTO tape at the primary site, and a remote global mirrored site that is also backed up to LTO tape.
So tape saved the day. What is the outlook for tape innovation in the future?
The future is bright for tape. Earlier this year, IBM and Fujifilm were able to [demonstrate a tape density achievement] that could enable a native 35TB tape cartridge capacity! This shows a long roadmap ahead for tape and a continued good night’s sleep for storage managers knowing that their precious data will be safe.
Of course, LTO tape is just one of the many reasons IBM is a successful and profitable leader in the IT storage industry. Doug Balog talked about his experiences in London for the [October 7th launch] of IBM DS8800, Storwize V7000 and SAN Volume Controller 6.1. Sanjay Tripathi showed recent successes with IBM's ProtecTIER Data Deduplication Solution and Information Archive products.
I would like to thank Bruce Master for his time in completing this interview. To learn more about IBM tape and storage offerings, visit [ibm.com/storage].
For the past three decades, IBM has offered security solutions to protect against unauthorized access. Let's take a look at three different approaches available today for the encryption of data.
Approach 1: Server-based
Server-based encryption has been around for a while. This can be implemented in the operating system itself, such as z/OS on the System z mainframe platform, or with an applicaiton, such as IBM Tivoli Storage Manager for backup and archive.
While this has the advantage that you can selectively encrypt individual files, data sets, or columns in databases, it has several drawbacks. First, you consume server resources to perform the encryption. Secondly, as I mention in the video above, if you only encrypt selected data, the data you forget to, or choose not to, encrypt may result in data exposure. Third, you have to manage your encryption keys on a server-by-server basis. Fourth, you need encryption capability in the operating system or application. And fifth, encrypting the data first will undermine any storage or network compression capability down-line.
Approach 2: Network-based
Network-based solutions perform the encryption between the server and the storage device. Last year, when I was in Auckland, New Zealand, I covered the IBM SAN32B-E4 switch in my presentation [Understanding IBM's Storage Encryption Options]. This switch receives data from the server, encrypts it, and sends it on down to the storage device.
This has several advantages over the server-based approach. First, we offload the server resources to the switch. Second, you can encrypt all the files on the volume. You can select which volumes get encrypted, so there is still the risk that you encrypt only some volumes, and not others, and accidently expose your data. Third, the SAN32B-E4 can centralized the encryption key management to the IBM Tivoli Key Lifecycle Manager (TKLM). This is also operating system and application agnostic. However, network-based encryption has the same problem of undermining any storage device compression capability, and often has a limit on the amount of data bandwidth it can process. The SAN32B-E4 can handle 48 GB/sec, with a turbo-mode option to double this to 96 GB/sec.
Approach 3: Device-based
Device-based solutions perform the encryption at the storage device itself. Back in 2006, IBM was the first to introduce this method on its [TS1120 tape drive]. Later, it was offered on Linear Tape Open (LTO-4) drives. IBM was also first to introduce Full Disk Encryption (FDE) on its IBM System Storage DS8000. See my blog post [1Q09 Disk Announcements] for details.
As with the network-based approach, the device-based method offloads server resources, allows you to encrypt all the files on each volume, can centrally manage all of your keys with TKLM, and is agnostic to operating system and application used. The device can compress the data first, then encrypt, resulting in fewer tape cartridges or less disk capacity consumed. IBM's device-based approach scales nicely. IBM has an encryption chip is placed in each tape drive or disk drive. No matter how many drives you have, you will have all the encryption horsepower you need to scale up.
Not all device-based solutions use an encryption chip per drive. Some of our competitors encrypt in the controller instead, which operates much like the network-based approach. As more and more disk drives are added to your storage system, the controller may get overwhelmed to perform the encryption.
The need for security grows every year. Enterprise Systems are Security-ready to protect your most mission critical application data.