Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Tony Pearson is a Master Inventor and Senior Software Engineer for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
Well it's Tuesday again, and you know what that means.. IBM announcements! Today, IBM announces that next Monday marks the 60th anniversary of first commercial digital tape storage system! I am on the East coast this week visiting clients, but plan to be back in Tucson in time for the cake and fireworks next Monday.
1925 - masking tape (which 3M sold under its newly announced Scotch® brand)
1930 - clear cellulose-based tape (today, when people say Scotch tape, they usually are referring to the cellulose version)
1935 - Allgemeine Elektrizitatsgesellschaft (AEG) presents Magnetophon K1, audio recording on analog tape
1942 - Duct tape
1947 - Bing Crosby adopts audio recording for his radio program. This eliminated him doing the same program live twice per day, perhaps the first example of using technology for "deduplication".
According to the IBM Archives the [IBM 726 tape drive was formally announced May 21, 1952]. It was the size of a refrigerator, and the tape reel was the size of a large pizza. The next time you pull a frozen pizza from your fridge, you can remember this month's celebration!
When I first joined IBM in 1986, there were three kinds of IBM tape. The round reel called 3420, and the square cartridge called 3480, and the tubes that contained a wide swath of tape stored in honeycomb shelves called the [IBM 3850 Mass Storage System].
My first job at IBM was to work on DFHSM, which was specifically started in 1977 to manage the IBM 3850, and later renamed to the DFSMShsm component of the DFSMS element of the z/OS operating system. This software was instrumental in keeping disk and tape at high 80-95 percent utilization rates on mainframe servers.
While visiting a client in Detroit, the client loved their StorageTek tape automation silo, but didn't care for the StorageTek drives inside were incompatible with IBM formats. They wanted to put IBM drives into the StorageTek silos. I agreed it was a good idea, and brought this back to the attention of development. In a contentious meeting with management and engineers, I presented this feedback from the client.
Everyone in the room said IBM couldn't do that. I asked "Why not?" The software engineers I spoke to already said they could support it. With StorageTek at the brink of Chapter 11 bankruptcy, I argued that IBM drives in their tape automation would ease the transition of our mainframe customers to an all-IBM environment.
Was the reason related to business/legal concerns, or was their a hardware issue? It turned out to be a little of both. On the business side, IBM had to agree to work with StorageTek on service and support to its mutual clients in mixed environments. On the technical side, the drive had to be tilted 12 degrees to line up with the robotic hand. A few years later, the IBM silo-compatible 3592 drive was commercially available.
Rather than put StorageTek completely out of business, it had the opposite effect. Now that IBM drives can be put in StorageTek libraries, everyone wanted one, basically bringing StorageTek back to life. This forced IBM to offer its own tape automation libraries.
In 1993, I filed my first patent. It was for the RECYCLE function in DFHSM to consolidate valid data from partial tapes to fresh new tapes. Before my patent, the RECYCLE function selected tapes alphabetically, by volume serial (VOLSER). My patent evaluated all tapes based on how full they were, and sorted them least-full to most-full, to maximize the return of cartridges.
Different tape cartridges can hold different amounts of data, especially with different formats on the same media type, with or without compression, so calculating the percentage full turned out to be a tricky algorithm that continues to be used in mainframe environments today.
The patent was popular for cross-licensing, and IBM has since filed additional patents for this invention in other countries to further increase its license revenue for intellectual property.
In 1997, IBM launched the IBM 3494 Virtual Tape Server (VTS), the first virtual tape storage device, blending disk and tape to optimal effect. This was based off the IBM 3850 Mass Storage Systems, which was the first virtual disk system, that used 3380 disk and tape to emulate the older 3350 disk systems.
In the VTS, tape volume images would be emulated as files on a disk system, then later moved to physical tape. We would call the disk the "Tape Volume Cache", and use caching algorithms to decide how long to keep data in cache, versus destage to tape. However, there were only a few tape drives, and sometimes when the VTS was busy, there were no tape drives available to destage the older images, and the cache would fill up.
I had already solved this problem in DFHSM, with a function called pre-migration. The idea was to pre-emptively copy data to tape, but leave it also on disk, so that when it needed to be destaged, all we had to do was delete the disk copy and activate the tape copy. We patented using this idea for the VTS, and it is still used in the successor models of IBM Sysem Storage TS7740 virtual tape libraries today.
Today, tape continues to be the least expensive storage medium, about 15 to 25 times less expensive, dollar-per-GB, than disk technologies. A dollar of today's LTO-5 tape can hold 22 days worth of MP3 music at 192 Kbps recording. A full TS1140 tape cartridge can hold 2 million copies of the book "War and Peace".
(If you have not read the book, Woody Allen took a speed reading course and read the entire novel in just 20 minutes. He summed up the novel in three words: "It involves Russia." By comparison, in the same 20 minutes, at 650MB/sec, the TS1140 drive can read this novel over and over 390,000 times.)
If you have your own "war stories" about tape, I would love to hear them, please consider posting a comment below.
The new [IBM System Storage Tape Controller 3592 Model C07] is an upgrade to the previous C06 controller. Like the C06, the new 3592-C07 can have up to four FICON (4Gbps) ports, four FC ports, and connect up to 16 drives. The difference is that the C07 supports 8Gbps speed FC ports, and can support the [new TS1140 tape drives that were announced on May 9]. A cool feature of the C07 is that it has a built-in library manager function for the mainframe. On the previous models, you had to have a separate library manager server.
Crossroads ReadVerify Appliance (3222-RV1)
IBM has entered an agreement to resell [Crossroads ReadVerify Appliance], or "RV1" for short. The RV1 is a 1U-high server with software that gathers information on the utilization, performance and health for a physical tape environment, such as an IBM TS3500 Tape Library. The RV1 also offers a feature called "ArchiveVerify" which validates long-term retention archive tapes, providing an audit trail on the readability of tape media. This can be useful for tape libraries attached behind IBM Information Archive compliance storage solution, or the IBM Scale-Out Network Attached Storage (SONAS).
As an added bonus, Crossroads has great videos! Here's one, titled [Tape Sticks]
Linear Tape File System (LTFS) Library Edition Version 2.1
While the hardware is all refreshed, the overall "scale-out" architecture is unchanged. Kudos to the XIV development team for designing a system that is based entirely on commodity hardware, allowing new hardware generations to be introduced with minimal changes to the vast number of field-proven software features like thin provisioning, space-efficient read-only and writeable snapshots, synchronous and asynchronous mirroring, and Quality of Service (QoS) performance classes.
The new XIV Gen3 features an Infiniband interconnect, faster 8Gbps FC ports, more iSCSI ports, faster motherboard and processors, SAS-NL 2TB drives, 24GB cache memory per XIV module, all in a single frame IBM rack that supports the IBM Rear Door Heat Exchanger. The results are a 2x to 4x boost in performance for various workloads. Here are some example performance comparisons:
Disclaimer: Performance is based on measurements and projections using standard IBM benchmarks in a controlled environment. The actual throughput that any user will experience will vary depending upon considerations such as the amount of multiprogramming in the user's job stream, the I/O configuration, the storage configuration, and the workload processed. Therefore, no assurance can be given that an individual user will achieve throughput improvements equivalent to the performance ratios stated here. Your mileage may vary.
In a Statement of Direction, IBM also has designed the Gen3 modules to be "SSD-ready" which means that you can insert up to 500GB of Solid-State drive capacity per XIV module, up to 7.5TB in a fully-configured 15 module frame. This SSD would act as an extension of DRAM cache, similar to how Performance Accelerator Modules (PAM) on IBM N series.
IBM will continue to sell XIV Gen2 systems for the next 12-18 months, as some clients like the smaller 1TB disk drives. The new Gen3 only comes with 2TB drives. There are some clients that love the XIV so much, that they also use it for less stringent Tier 2 workloads. If you don't need the blazing speed of the new Gen3, perhaps the lower cost XIV Gen2 might be a great fit!
As if I haven't said this enough times already, the IBM XIV is a Tier-1, high-end, enterprise-class disk storage system, optimized for use with mission critical workloads on Linux, UNIX and Windows operating systems, and is the ideal cost-effective replacement for EMC Symmetrix VMAX, HDS USP-V and VSP, and HP P9000 series disk systems, . Like the XIV Gen2, the XIV Gen3 can be used with IBM System i using VIOS, and with IBM System z mainframes running Linux, z/VM or z/VSE. If you run z/OS or z/TPF with Count-Key-Data (CKD) volumes and FICON attachment, go with the IBM System Storage DS8000 instead, IBM's other high-end disk system.
IBM wins lots of awards, but this time is unique: [IBM and Fox Networks Group have jointly won an Engineering Emmy® Award] for Innovation from the Academy of Television Arts & Sciences. According to the Academy, by improving the ability of media companies to capture, manage and exploit content in digital form, IBM and Fox have fundamentally changed the way that audio and video content is managed and stored. Here's an excerpt from the IBM Press Release:
"By standardizing technologies in this way, Fox can now use open-standard, file-based tape in all aspects of production, post-production and distribution functions – displacing costly proprietary tape formats and/or disk subsystems. This provides media companies with the consumer equivalent of having their entire library of DVDs online and available at any time, and the ability to go to a specific scene, in any one of the movies, in an instant.
In the early stage of the technology initiative, the IBM/Fox team applied IBM-patented technologies invented by IBM Research for high-speed data movement. They also integrated traditional broadcast transport and encoding standards with IT industry open standards. This allowed either Standard Definition (SD) or HD programming to be available in real time for digital recording and repurposing -- with improved economics."
Unfortunately, people didn't like the name, but they loved the acronym, so it was renamed to Linear Tape File System. IBM offers LTFS single-drive edition on its LTO-5 and TS1140 tape drives, and LTFS library-edition across all of its tape libraries. Since everyone hates proprietary vendor lock-in, IBM has graciously shared LTFS as an open source standard with the rest of the Linear Tape Open consortium.
(Note: I was not there at the awards ceremony. The pictures were taken by Ed Childers, David Pease and Rainer Richter of each other. Additional photos are available on this [Flicr photo album].)
(1) Rainer Richter, Media Technology Market Partners LLC [MTMP], presenting the Emmy to Steve Canepa, IBM General Manager for Media and Entertainment industry. MTMP is an IBM Business Partner that offers integrated solutions for LTO and LTFS, consulting, services, and technology to the media and entertainment industry…
(2) Ed Childers, IBM manager of the Tape Drive Development team, holding the Emmy. Fellow IBM blogger Steve Hamm credits Ed on coming up with the idea for LTFS seven years ago, in his blog post [Coding and Loading in Las Vegas: How a Team of IBM Researchers Helped Transform the Way Video is Stored]. Ed wanted to make tape storage easier to use and to integrate it into the workflow of networks and studios, and suggested using an indexing system that would allow people to write software that would make video more accessible.
(3) David Pease, IBM Senior Technical Staff Member from the IBM Almaden Research Center, holding the Emmy. Along with Lucas Villa Real (IBM Brazil) and Michael Richmond (IBM Almaden), David and his team were able to come up with a working prototype in just four months. Michael discusses this in his posts [Tape? Does anyone care about Tape anymore?"] and [the Emmy goes to... LTFS].
Of course, Technology is only worthwhile if you put it to use. Our friends at FOX initially partnered with IBM to develop this video archive solution for the National Football League (NFL). If there is one place that "re-purposes" a lot of video footage, it is sports television. The technology proved so useful that FOX has since expanded it to other types of programming.
My colleagues, Harley Puckett (left) and Jack Arnold (right) were highlighted in today's Arizona Daily Star, our local newspaper, as part of an article on IBM's success and leadership in the IT storage industry. At 1400 employees here in Tucson, IBM is Southern Arizona's 36th largest employer.
Highlighted in the article:
DS8700 with the new Easy Tier feature
TS7650 ProtecTIER virtual tape library with data deduplication capability
LTO-5 tape and the new Long Term File System (LTFS)
XIV with the new 2TB drive, for a maximum per-rack usable capacity of 161 TB.
This week I was aboard the Queen Mary in Long Beach, California! This was a business event organized by [Key Info Systems], a valued IBM Business Partner. Key Info resells IBM servers, storage and switches.
The Queen Mary retired in 1967, and has been converted into a hotel and events venue. The locals just parked their car and walked on board, but I got to stay Tuesday through Thursday in one of the cabins. It was long and narrow, with round windows! There were four dials for the bathtub: Cold Salt, Hot Fresh, Cold Fresh, and Hot Salt.
Stepping on the boat was like walking back in time through history! If you decide to go see it, check out the [Art Deco bar at the front of the Promenade deck. The ship is still in the water, but is permanently docked. It is sectioned off to prevent the ocean waves from affecting it, so we did not have the nauseous moving back and forth normally associated with cruise ships.
(It is with a bit of irony that we are on the Queen Mary just days after the tragedy of the [Costa Concordia], the largest Italian cruise ship that ran aground near Isola de Giglio. The captain will have to explain how he [fell into a lifeboat] before he had a chance to wait for everyone else to get safely off the shipwreck. He was certainly no [Captain Sulley]! I am thankful that most of the 4,200 people survived the incident.)
Lief Morin, Founder and Chief Executive for Key Info Systems, kicked off the meeting with highlights of 2011 successes. I have known Lief for years, as Key Info comes to the Tucson EBC on a frequent basis. This event was designed to give his sellers an update of what is the latest for each product line, and what to look forward to in the next 12-18 months.
The next speaker was from Vision Solutions that provides High Availability solutions for IBM i on Power Systems. In 2010, their company nearly doubled in size with the acquisition of Double-Take, which provides data replication for x86 servers running Windows, Linux, VMware, Hyper-V and other hypervisors. The capabilities of Double-Take sounded similar to what IBM offers with [Tivoli Storage Manager FastBack] and [Tivoli Storage Manager for Virtual Environments].
Dinner at Sir Winston's
Rather than take the "Ghosts and Legends" tour, I opted for dinner at the Queen Mary's signature restaurant, Sir Winston's. This is a fancy place, so dress accordingly. If you want the Raspberry soufflé, order it early as it takes 30 minutes to prepare!
[Storwize V7000], including the new Storwize V7000 Unified configuration
Storage is an important part of the Key Info Systems revenue stream, so I was glad to have lots of questions and interactions from the audience.
Murder Mystery Dinner
The acting troupe from [Dinner Detective] put on quite the show for us! With all that is going on in the world, it is good to laugh out loud every now and then.
In other murder mystery dinners I have participated in, each person is assigned a "character" and given a script of what to say and when to say it. This was different, we got to pick our own characters. I chose "Doctor Watson", from the Sherlock Holmes series. Several attendees thought it was a double meaning with [IBM Watson], the computer that figured out the clues on Jeopardy! television game show, and has since been [put to work at Wellpoint] to help out the Healthcare industry.
After the "murder" happened, two actors portraying policemen selected members of the audience to answer questions. We didn't get a script of what to say, so everyone had to "ad lib". I was singled out as a suspect, and had fun playing along in character. One of the attendees afterwards said he was impressed that I was able to fabricate such amusing and elaborate responses to their personal and embarassing questions. As a public speaker for IBM, I have had a lot of practice thinking quickly on my feet.
Fibre Channel and Ethernet Switches
The next two speakers gave us an update on Fibre Channel and Ethernet switches, and their thoughts on the inevitability of Fibre Channel over Ethernet (FCoE). One of the exciting new developments is the [Brocade Network Subscription] which creates a flexible pay-per-use Ethernet port rental model for customers. This is especially timely given the Financial Accounting Standards Board proposed [FASB Change 13] that affects operating leases in the balance sheet.
With the Brocade Network Subscription, you pay monthly for the ports you are using. Need more ports, Brocade will install the added gear. Use fewer ports, Brocade will take the equipment back. There is no term endpoint or residual value like tradtional leasing, so when you are done using the equipment, give it back any time. This is ideal for companies that may need to have a lot of Ethernet ports for the next 2-3 years, but then plan to taper down, and don't want to get stuck with a long-term commitment or capital depreciation.
The last speaker was from VMware. IBM is the #1 reseller of VMware, and VMware commands an impressive 81 percent marketshare in the x86 virtualization space. The speaker presented VMware's strategy going forward, which aligns well with IBM's own strategy, to help companies Cloud-enable their existing IT infrastructures, in preparation for eventual moves to Hybrid or Public cloud deployments.
Special thanks to Lief Morin for sponsoring this event, Raquel Hernandez from IBM for coordinating my travel, and Pete, Christina and Kendrell from Key Info Systems for organizing the activities!
Well, it's Tuesday again, and you know what that means! IBM Announcements! Typically, IBM System Storage has three to five major product launches per year. Making announcements every Tuesday would have been two frequent, and having one big announcement every two or three years would be too far apart. Worldwide combined revenues for storage hardware and software grew double digits last year, comparing full-year 2011 to the prior 2010 year, and I am sure that 2012 will also be a good year for IBM as well! This week we have announcements for both disk and tape, but since 2012 is the 60th Diamond Anniversary for tape, I will start with tape systems first.
TS1140 support for JA/JJ tape cartridges
The TS1140 enterprise tape drive was announced at the [Storage Innovation Executive Summit] last May. It supported a new E07 format on three different new tape cartridges. Models "JC" was 4.0TB standard re-writeable tapes, "JY" was 4.0TB WORM tapes, and "JK" were 500GB economy tapes that were less expensive, but offered faster random access.
Generally, IBM has adopted an N-2 read, N-1 write [backward compatibility]. This means that the TS1140 could read E05 and E06 formatted tapes on JB and JX media, and could write E06 format on JB and JX media. However, there are a lot of older JA and JJ media, especially as part of TS7740 environments, so IBM now supports TS1140 drives to read J1A formatted JA and JJ media. This is not just for TS7740 environments, any TS1140 in stand-alone or tape library configurations will support this as well.
TS7700 R2.1 enhancements
IBM is a leader in tape virtualization with or without physical tape as back-end media. There are two hardware models of the [IBM Virtualization Engine TS7700 family] for the IBM System z mainframe. These virtual libraries are referred to as "clusters" in IBM literature.
The TS7740 Virtual Tape Library supports putting virtual tape images on disk first, then move less-active data to physical tape, which I covered in my blog post [IBM Announcements - July 2007].
A unique feature of the TS7700 series is support for a Grid configuration, which allows up to six different TS7700 clusters to be grouped into a single instance image. These clusters can be in local or remote locations, connected via WAN or LAN connections.
R2.1 is the latest software release of this successful IBM's TS7700 series.
True Sync Mode Copy. Before R2.1, the TS7700 offered "immediate mode copy". An application would write to a virtual tape, and when it was done with the tape and performed an unmount, the TS7700 would then replicate the tape contents to a secondary cluster on the grid. With True Sync Mode, data contents are replicated per implicit or explicit SYNC points. This is another IBM first in the IT tape industry.
Remote Mount Fail-over. When you have two or more TS7700 clusters in a grid configuration, you can do remote mounts. We've added fail-over multi-pathing up to four paths, so that if a link to a remote cluster is down, it will try one of the others instead.
Parallel Copies and Pre-Migration. On of my 19 patents is for the pre-migration feature for the IBM 3494 Virtual Tape Server (VTS) that carries forward into the TS7700, and is also used in the SONAS and Information Archive products. However, when the grid architecture was introduced, the engineers decided not to allow pre-migration and copies to secondary clusters to occur concurrently. Now these two operations can be done in parallel.
Merge two grids into one grid. Now that we can support up to six clusters into a single grid, we have people with 2-cluster and 3-cluster grids looking to merge them into one. Of course, all the logical and physical volume serials (VOLSER) must be unique!
Accelerate off JA/JJ Media. There are a lot of older JA and JJ media still in TS7700 libraries. This feature allows customers to speed up the transition to newer physical tape media.
Copy Export to E06 format on JB media. This one is clever, and I have to say I would have never thought about it. Let's say you have a TS7740 with TS1140 drives, but you want to export some virtual tapes to physical media to be sent to someone who only has a TS7740 connected with older TS1130 drives. These older drives can't read new JC media nor make sense of the E07 format. This feature will let you export to older JB media in E06 format so that it will be fully readable at the new location on the TS1130 drives.
Copy Export Merge service offering. Thanks to mergers and acquisitions, it is sometimes necessary to split off a portion of data from a TS7700 grid. In the past, IBM supported sending this export to a completely empty TS7700 library, but this new service offerings allows the export to be merged into an existing TS7700 that already contains data.
LTFS-SDE support for Mac OS X 10.7 Lion
How do people still not yet know about the Linear Tape File System [LTFS]? I mentioned this in my blogs back in 2010 in [April], [September], and [November]. Last year, LTFS was the [NAB Show Pick Hits Award] and an [Emmy] for revolutionizing the use of digital tape in Television broadcasting.
In layman's terms, the Single Drive Edition [LTFS-SDE] allows a tape cartridge to be treated like USB memory stick. It is supported on the LTO5 tape drives for systems running various levels of Windows, Linux and Mac OS X. Prior to this announcement, IBM supported Snow Leopard (10.5.6) and Leopard (10.6), and now supports Mac OS X 10.7 "Lion" release.
IBM first introduced Solid-State Drives (SSD) back in 2007 where it made sense the most, in [drive-for-drive replacements on blade servers in the IBM BladeCenter]. Blade servers typically only have a single drive, and SSD are both faster and use less energy on a drive-for-drive comparison, so this provided immediate benefit. Today, SSD are available on a variety of System x and POWER system servers.
In 2008, IBM rocked the world by being the first to reach [1 Million IOPS with Project Quicksilver]. This was an all-SSD configuration which many considered unrealistic (at the time), but it showed the potential for solid state drives.
When the [XIV Gen3 was Announced - July 2011], each module included an 1.8-inch "SSD-Ready" slot in the back. IBM made a Statement of Direction that IBM would someday offer SSD drives to put in these slots. Today's announcement is that IBM has finalized the qualification process, so now XIV Gen3 clients can have 400GB of usable non-volatile SSD read cache added to each module. This SSD can be added to existing XIV Gen3 boxes in the field, or it can be factory-installed in new shipments. If you have a 15-module XIV, that's 6TB of additional read cache! This SSD is entirely managed by the XIV Gen3, so you won't have to spend weeks reading manuals or specifying configuration parameters.
When you carve volumes on the XIV, you now have an option to enable or disable use of the SSD cache for each volume. Since XIV is being used in private and public cloud deployments, this offers the ability to offer premium performance at premium prices. The use of SSD is complementary to IBM XIV Quality of Service (QoS) performance levels, which are determined by host instead.
Well, that's the first major IBM System Storage launch of 2012. Let me know what you think in the comment section below.
In my presentations in Australia and New Zealand, I mentioned that people were re-discovering the benefits of removable media. While floppy diskettes were convenient way of passing information from one person to another, they unfortunately did not have enough capacity. In today's world, you may need Gigabytes or Terabytes of re-writeable storage with a file system interface that can easily be passed from one person to another. In this post, I explore three options.
(FCC Disclaimer: I work for IBM, and IBM has no business relationship with Cirago at the time of this writing. Cirago has not paid me to mention their product, but instead provided me a free loaner that I promised to return to them after my evaluation is completed. This post should not be considered an endorsement for Cirago's products. List prices for Cirago and IBM products were determined from publicly available sources for the United States, and may vary in different countries. The views expressed herein may not necessarily reflect the views and opinions of either IBM or Cirago.)
I took a few photos so you can see what exactly this device looks like. Basically, it is a plastic box that holds a single naked disk drive. It has four little rubber feet so that it does not slip on your desk surface.
The inside is quite simple. The power and SATA connections match those of either a standard 3.5 inch drive, or the smaller form factor (SFF) 2.5 inch drive. However, to my dismay, it does not handle EIDE drives which I have a ton of. After taking apart six different computer systems, I found only one had SATA drives for me to try this unit out with.
The unit comes with a USB cable and AC/DC power adapter. In my case, I found the USB 3.0 cable too short for my liking. My tower systems are under my desk, but I like keeping docking stations like this on the top of the desk, within easy reach, but that wasn't going to happen because the USB cable was not long enough.
Instead, I ended up putting it half-way in between, behind my desk, sitting on another spare system. Not ideal, but in theory there are USB-extension cables that probably could fix this.
Here it is with the drive inside. I had a 3.5 inch Western Digital [1600AAJS drive] 160 GB, SATA 3 Gbps, 8 MB Cache, 7200 RPM.
To compare the performance, I used a dual-core AMD [Athlon X2] system that I had built for my 2008 [One Laptop Per Child] project. To compare the performance, I ran with the drive externally in the Cirago docking station, then ran the same tests with the same drive internally on the native SATA controller. Although the Cirago documentation indicated that Windows was required, I used Ubuntu Linux 10.04 LTS just fine, using the flexible I/O [fio] benchmarking tool against an ext3 file system.
Sequential Write - a common use for external disk drive is backup.
Random read - randomly read files ranging from 5KB to 10MB in size.
Random mixed - randomly read/write files (50/50 mix) ranging from 5KB to 10MB in size.
Random Mixed (50/50)
Latency (msec) read
Latency (msec) write
Bandwidth (KB/s) read
Bandwidth (KB/s) write
For sequential write, the Cirago performed well, only about 15 percent slower than native SATA. For random workloads, however, it was 30-40 percent slower. If you are wondering why I did not get USB 3.0 speeds, there are several factors involved here. First, with overheads, 5 Gbps USB 3.0 is expected to get only about 400 MB/sec. My SATA 2.0 controller maxes out at 375 MB/sec, and my USB 2.0 ports on my system are rated for 57 MB/sec, but with overheads will only get 20-25 MB/sec. Most spinning drives only get 75 to 110 MB/sec. Even solid-state drives top out at 250 MB/sec for sustained activity. Despite all that, my internal SATA drive only got 16 MB/sec, and externally with the Cirago 14 MB/sec in sustained write activity.
Here is the mess that is inside my system. The slot for drive 2 was blocked by cables, memory chips and the heat sink for my processor. It is possible to damage a system just trying to squeeze between these obstacles.
However, the point of this post is "removable media". Having to open up the case and insert the second drive and wire it up to the correct SATA port was a pain, and certainly a more difficult challenge than the average PC user wishes to tackle.
Price-wise, the Cirago lists for $49 USD, and the 160GB drive I used lists for $69, so the combination $118 is about what you would pay for a fully integrated external USB drive. However, if you had lots of loose drives, then this could be more convenient and start to save you some money.
IBM RDX disk backup system
Another problem with the Cirago approach is that the disk drives are naked, with printed circuit board (PCB) exposed. When not in the docking station, where do you put your drive? Did you keep the [anti-static ESD bag] that it came in when you bought it? And once inside the bag, now what? Do you want to just stack it up in a pile with your other pieces of equipment?
To solve this, IBM offers the RDX backup system. These are fully compatible with other RDX sytems from Dell, HP, Imation, NEC, Quantum, and Tandberg Data. The concept is to have a docking station that takes removable, rugged plastic-coated disk-enclosed cartridges. The docking station can be part of the PC itself, similar to how CD/DVD drives are installed, or as a stand-alone USB 2.0 system, capable of processing data up to 25 MB/sec.
The idea is not new, about 10 years ago we had [Iomega "zip" drives] that offered disk-enclosed cartridges with capacities of 100, 250 and 750MB in size. Iomega had its fair share of problems with the zip drive, which were ranked in 2006 as the 15th worst technology product of all time, and were eventually were bought out by EMC two years later (as if EMC has not had enough failures on its own!)
The problem with zip drives was that they did not hold as much as CD or DVD media, and were more expensive. By comparison, IBM RDX cartridges come in 160GB to 750GB in size, at list prices starting at $127 USD.
IBM LTO tape with Long-Term File System
Removable media is not just for backup. Disk cartridges, like the IBM RDX above, had the advantage of being random access, but most tape are accessed sequentially. IBM has solved this also, with the new IBM Long Term File System [LTFS], available for LTO-5 tape cartridges.
With LFTS, the LTO-5 tape cartridge now can act as a super-large USB memory stick for passing information from one person to the next. The LTO-5 cartridge can handle up to 3TB of compressed data at up to SAS speeds of 140 MB/sec. An LTO-5 tape cartridge lists for only $87 USD.
The LTO-5 drives, such as the IBM [TS2250 drive] can read LTO-3, LTO-4 and LTO-5cartridges, and can write LTO-4 and LTO-5 cartridges, in a manner that is fully compatible with LTO drives from HP or Quantum. LTO-3, LTO-4 and LTO-5 cartridges are available in WORM or rewriteable formats. LTO-4 and LTO-5 cartridges can be encrypted with 256-bit AES built-in encryption. With three drive manufacturers, and seven cartridge manufacturers, there is no threat of vendor lock-in with this approach.
These three options offer various trade-offs in price, performance, security and convenience. Not surprisingly, tape continues to be the cheapest option.
IBM introduced the Linear Tape File System last year, which I explained in my post [IBM Celebrates 10 Year Anniversary for LTO tape], and released it as open source to the rest of the Linear Tape Open [LTO] Consortium so that the entire planet can benefit from IBM's innovation. IBM presented a technology demonstration of its Linear Tape File System - Library Edition at the NAB conference, showing how this new IBM library offering of the file system can put mass archives of rich media video content at the users fingertips with the ease of library automation.
From left to right, here is Atsushi Nagaishi (Toshiba) and Shinobu Fujihara (IBM). Fujihara-san is from IBM's Yamato lab in Japan where some of the LTFS development was done. The Yamato Lab was not damaged by the [Earthquakes in Japan].
With the capabilities of LTFS, IBM has introduced an entirely new role for tape, as an attractive high capacity, easy to use, low cost and shareable storage media. LTFS can make tape usable in a fashion like removable external disk, a giant alternative to floppy diskettes, DVD-RW and USB memory sticks with directory tree access and file-level drag-and-drop capability. LTFS can allow the for passing of information around from one system or employee to another. And as for high video storage capacity, a 1.5TB LTO-5 cartridge can hold about 50 hours of XDCAM HD video!
A group photo of the global IBM LTFS team, from left to right, David Pease from IBM Almaden Research Center, Ed Childers from IBM Tucson, Shinobu Fujihara and Hironobu Nagura from IBM Japan.
IBM was once again #1 leader in Tape worldwide for the year 2010. With this exciting new win, tape is not just for backup and archive anymore!
Continuing my discussion of this week's announcements of IBM storage products, I will cover the announcements that double storage capacity per footprint.
Linear Tape Open - Generation 5
IBM announced [LTO-5 drives], the TS2250 half-height and the TS2350 full-height drives, as well as support for LTO-5 drives in its various tape libraries: TS3100, TS3200, and TS3500. The native 1.5TB capacity of the LTO-5 cartridge is nearly double the 800GB capacity of the LTO-4 predecessor. With 2:1 compression, that's 3TB of data per cartridge! Performance-wise, the data transfer rate is 140 MB/sec, about 17 percent improvement over the 120MB/sec of the LTO-4 technology. The TS2250, TS2350, TS3100 and TS3200 now all offer dual-SAS ports for higher availability.
LTO-5 carries forward many of the advancements of past generations. For example, LTO-5 continues the G-2/G-1 "backward compatibility" architecture, which means that the LTO-5 drive can read LTO-3 and LTO-4 cartridges, and can write LTO-4 cartridges. Like the LTO-3 and LTO-4, the same LTO-5 drive can read and write WORM or regular rewriteable cartridges. Like the LTO-4, the LTO-5 offers drive-level data-at-rest encryption. These use a symmetric 256-bit AES key, managed by IBM Tivoli Key Lifecycle Manager (TKLM).
One thing that is new in LTO-5 is the Long Term File System [LTFS] available on the TS2250 and TS2350, which allows you to treat the tape as a hierarchical file system, with files and folders, that you can drag and drop like any other file system.
XIV storage system
IBM [doubles the capacity of the XIV storage system] by supporting 2TB SATA drives. A full 15-module frame can hold up to 161TB of usable capacity. The smallest 6-module system with 2TB can hold up to 55TB of usable capacity. At this time, all of the drives in an XIV must be the same type, so we do not yet allow intermix of 1TB and 2TB in the same frame. The 2TB are more energy efficient, with a full 15-module frame consuming on average 6.7 kVA, compared to 7.8 kVA for the 1TB drives. The performance is roughly the same, so if, for example, your application workload got 3700 IOPS per module with 1TB drives, it will get about the same 3700 IOPS per module with 2TB drives.
The EXN1000 and EXN3000 can now double in capacity with 2TB SATA drives. These can be attached to the N3000 entry-level models, such as the N3400.
DS3000 disk system
The DS3200, DS3300 and DS3400, as well as their related expansion drawers, now supports 2TB SATA drives. This means that a single control unit with three expansion drawers can hold up to 96TB of raw capacity (48 drives).
DS8700 disk system
The DS8700 also now supports 2TB SATA drives, for a maximum raw capacity over 2PB, as well as new 600GB Fibre Channel drives. Now that IBM offers [Easy Tier] functionality, pairing Solid State Drives with slower, energy-efficient SATA disk makes a lot of financial sense.
That's a lot of announcements! As always, feel free to dig into each of the links to learn more about each product.
Well, it's Tuesday again, and you know what that means... IBM announcements!
Last week, IBM had a big storage launch of various products, with the June 4 announcements at the IBM Edge 2012 conference. I provided highlights in my post [IBM Edge Announcements]. As promised, here are the rest of the announcements.
SONAS v1.3.2 adds support for management by the newly announced IBM Tivoli Storage Productivity Center v5.1 release. Also, IBM now officially supports "Gateway configurations" that have the storage nodes connected to XIV or Storwize v7000 disk systems. These gateway configurations offer new flexible choices and options for our ever-expanding set of clients.
ProtecTIER appliances and gateways
IBM ProtecTIER line of data deduplication appliances and gateways add CIFS file system support. Rather than using OST or a VTL interface, you now have CIFS as a new option for host attach. Also, IBM introduces the new TS7620 Express model, with options for 5.4TB and 11TB in capacity, replacing the previous TS7610 entry level.
LTFS Storage Manager
The Linear Tape File System (LTFS) allows files to be stored on tape cartridges in a manner that allows them to be mounted as file systems, much like a USB memory stick. The new LTFS Storage Manager software allows you to manage a collection of files across a set of cartridges, moving files from one cartridge to another, consolidating valid data onto fewer cartridges, and removing files no longer needed. This is sometimes referred to as "lifecycle management".
Tape System Library Manager
When IBM first introduced the "shuttle" that allowed up to fifteen TS3500 tape libraries to be connected together into a single system, only HPSS customers could take advantage of this. Software was required to coordinate the movement of cartridges from one library to another. The new IBM Tape System Library Manager now offers an alternative to HPSS for coordinating this activity.
DS8000 v6.3 microcode
IBM now offers 400GB solid-state drives. IBM's market leading support for Full Disk Encryption (FDE) is now extended to cover all drive speeds, from the slowest 7200RPM NL-SAS drives up to the fastest solid-state. IBM Easy Tier extends its super-easy implementation to work across all three of these tiers including encryption.
IBM now offers implementation services for IBM XIV Gen3 storage system, and the N series models 3220 and 3240.
This week I am on the road visiting various clients. Next week, Moscow Russia for the "Edge Comes to You" event!
The client that bought these dozen IBM System Storage DS8800 disk systems also bought three DS8700 systems.
Governor's Celebration of Innovation [GCOI] is an annual awards gala, with attendees who include technologists, corporate executives, entrepreneurs, investors, and policymakers. Last week, IBM was awarded "Innovator of the Year" in the Large Company category for its Easy Tier feature of the IBM DS8700 that allows optimal use of Solid-State Drives through sub-LUN automatic movement of data. IBM's Long Term File System (LTFS) was also a finalist under consideration.
The award was presented to Cindy Grossman, IBM VP and Senior Location Executive for Tucson. Joining her were Dr. Krishna Nathan, Ed Childers, Glen Jaquette, Vincent Hsu, Rick Krebsbach, Gene Leo, Denise Lopez, Hironobu Nagura, Calline Sanchez, Johnny Smith, and Dr. Cheng-Chung Song.
Well, it's Tuesday again, and you know what that means! IBM Announcements!
Today also happens to be [Election Day] in the United States, and some have questioned IBM's logic of making major storage announcements on Election Day. During the campaigns, a major theme was to help Small and Medium size businesses, because these are the engines of economic growth and improved employment.
Hopefully, you all saw today's Launch Webcast on these announcements, but in case you missed it, waiting in line at the polling station to cast your vote, or caught without electricity or Internet access from [Superstorm Sandy], it is now available [On-Demand].
The 2U control enclosure can have up to four additional 2U expansion enclosures, for a maximum of 120 drives, or 180TB of raw disk capacity. Like the Storwize V7000, the Storwize V3700 supports a [large number of servers and operating systems.]
Many of the features you already know from the Storwize V7000 are carried forward:
1GbE iSCSI + 8GbFC
8GbFC, 10GbE iSCSI/FCoE, Statement of Direction for 6Gb SAS
8GB per canister
4GB per canister, upgradeable to 8GB
Up to 4 control enclosures in a clustered system, each with up to 9 expansion enclosures
Up to 4 expansion enclosures
Maximum Number of drives/TB
Up to 120 drives/180TB
RAID levels supported
GUI, CLI, SMI-S API
GUI, CLI, SMI-S API
Internal (included), external (optional)
Internal only (included)
Non-disruptive data migration
One-directional (migrate to Storwize V3700, included)
Statement of direction
Up to 256 targets (included)
Up to 64 targets (included) Statement of Direction for optional 2,040 targets
Metro Mirror and Global Mirror (optional)
Statement of Direction (optional)
The IBM Storwize V3700 is offered at attractive leasing options through IBM Global Financing.
IBM LTO-6 drives and midrange tape libraries
Last month, IBM's [Tape and Storage Hypervisor Announcements] included LTO-6 for the enterprise-class TS3500 tape library. Today, the LTO-6 support is complete with support for midrange tape drives and libraries.
There are two tape drive models. The TS2260 is based on the half-height drive, intended for occasional 9-to-5 usage. The TS2360 is based on the full-height drive, intended for 24x7 access. These drives can read LTO-4 and LTO-5 tape cartridge media, and can write LTO-5 cartridge media. The new LTO-6 tape cartridge media is expected to be available next month.
In addition to the IBM TS3500 Enterprise Tape Library, LTO-6 is now supported on all of the midrange tape libraries: TS2900, TS3100, TS3200 and TS3310.
IBM Linear Tape File System Library Edition V2.1.2
There are two levels of [Linear Tape File System], or LTFS for short. The first is the Single Drive Edition (LTFS-SDE), which allows you to attach an LTO-5, LTO-6 or TS1140 tape drive to a single workstation, and allow you to mount tape cartridges as easy as mounting USB memory sticks. This presents a full file system view that allows you to read, edit, create, and even drag-and-drop files to other file systems. The LTFS-SDE driver is available for Windows, Linux, and Mac OS.
The second is the Library Edition (LTFS-LE), which allows you to mount the entire tape library as a file system. Each tape cartridge in the library is presented as a subdirectory folder, that you can access like any file system on disk. This was only available for Linux systems, which could then export the files through NFS, FTP or HTTP protocols to other clients. Now, with release v2.1.2, LTFS-LE supports Windows servers, so that you can share the files with other clients through CIFS as well.
IBM Tivoli Storage Productivity Center v4.2.2 Overview and Update
This was an updated version of the presentation I gave last July in Orlando, Florida (see my post [IBM Storage University - Day 1]). Since it might have been awhile since the Australian audience had heard about the latest and greatest for Tivoli Storage Productivity Center, I decided to cover the enhancements of 4.2.0, 4.2.1 and 4.2.1 combined.
IBM Tivoli Storage Productivity Center is an important part of IBM's "Storage Hypervisor" solution, combining a single pane of glass for management with non-disruptive storage virtualization with SVC and Storwize V7000.
IBM Storwize V7000 and SVC integration with VMware
Alexi Giral from IBM Sydney presented this session on how Storwize V7000 and SVC serve as the "Storage Hypervisor" for VMware server virtualization environments. The focus was on the FCP and iSCSI block-only access modes of these devices, although one could use IBM Storwize V7000 Unified to provide NFS file-level access to VMware. Alexi covered both VMware Vsphere v4 and v5, as there are a few differences.
IBM Storwize V7000 and SVC supports thin provisioning, VMware's VAAI interface, VMware's Site Recovery Manager, and provides a storage management plug-in to Vmware's vCenter. The SVC has extended the distance for split-cluster configurations that support VMware's vMotion live partition mobility and High Availiability (HA) up to 300km using active DWDM.
Tape Storage Reinvented: What's New and Exciting in the Tape World?
Special thanks to Jim Fisher and Jim Karp for providing me this presentation, videos and supporting materials for me to present this session. I gave this as the first break-out session on Tuesday, and then repeated as the last break-out session on Thursday. Several of the attendees in the audience mocked my title, with taunts like "What could be NEW or EXCITING about tape?" I covered four key areas:
The new TS1140 tape drive, including the corresponding model-JC tape that holds 4TB native (12 TB compressed!).
The enhanced TS3500 with the Tape Library Connector Shuttle. I had a video that shows how tapes can be sent from one TS3500 tape library string to another.
The new Linear Tape File System (LTFS), both the single drive edition and the library edition
The new 3592-C07 FICON controller for our mainframe clients
By the end of the session, the folks that taunted me were honestly impressed that they learned a few things, and had not realized so much has been developed recently in the world of tape.
Ten years ago, I travelled to New York City with my colleague, Randy Fleenor, to present the latest in IBM tape technology for the 50th Anniversary. On Thursday evening that week, the latest movie in the Star Wars saga, Episode II: Attack of the Clones was just released, and it was being shown using the new Digital Light Projection (DLP) technology just around the corner at the Ziegfeld theater! This movie was the first live-action film to be filmed entirely digital. George Lucas saw that digital video was the future, and started the process moving forward with this film.
I convinced Randy to join me, and we arrived at 11:10pm, the movie was scheduled to start at 11pm, so we figured we had only missed a few previews. We walked into a completely empty lobby. I asked for two tickets for the 11pm show at the ticket counter, and was told it was all sold out, and there was a huge line around the building for all the people waiting to see the 1:00am show, and that we might get in to see the 3:00am show.
Randy and I had meetings on Friday morning, so we were not going to wait in line all night to see a 3am show! Just then, a young man comes out of the theater. He said his girlfriend can't make it, and wanted a refund for his two tickets. I pulled out a twenty-dollar bill, offered to buy them directly at face value, and the theater employees approved the transaction. The seats were front row of the balcony section. By then we had missed all the previews and a short bit of the movie, but that was alright with us.
(FTC Disclosure: I am both an employee and stockholder in IBM. The U.S. Federal Trade Commission may consider this a paid, celebrity endorsement of LTO-5 tapes and the LTFS technology. References to other companies are for illustrative purposes and do not represent an endorsement of their products or services.)
Digital recording is ideal for all types of video, including movies, television, and commercial advertisements.
The latest excitement is over IBM's Linear Tape File System™ (LTFS), which IBM donated to the IT industry as open source so that everyone in the world can benefit. This allows tape cartridges to be treated like USB memory sticks, the ultimate in portability of data. It is supported for Windows, Mac OS, and Linux, and already well embraced by the Media-and-Entertainment (M&E) industry.
"The move to IBM technology has helped the network shrink its archive from 1,507 to just 388 square feet, representing dramatic systems and energy-cost savings."
"AlphaTV has been broadcasting since 1996, creating and storing all forms of video entertainment, from soap operas and documentaries, to movies and sporting events, and creating a vast video archive along the way. Initially, AlphaTV archived its programming on Sony Beta SP format video cassettes that stored up to 90 minutes of content. Not long after, in need of storage that offered greater density, it turned to DVCPRO format videos that stored up to 120 minutes. But even that format was not allowing the network to keep pace with its ballooning archive, a storage infrastructure that by 2011 spanned more than 1,507 square feet."
"'A Greek TV series stored on 100 DVCPRO tapes took up four shelves in our library, whereas on LTO-5 cartridge now takes up the space of a deck of playing cards,' Constantinos Colombus, chief technology officer at AlphaTV, said in a statement."
"IBM LTFS, an intuitive and graphical file system that provides direct access to data on LTO 5 drives, has enabled AlphaTV to manage, move and share video files much like they can with disk-management systems, by simply dragging and dropping. As a result, file management is easier to do and far more efficient, said Colombus."
To prepare for this anniversary, I spoke with Brad Johns, of [Brad Johns Consulting]. Brad was head of IBM tape marketing for a while, and ran tape customer councils to gather feedback from our largest customers. Brad was my mentor in marketing at IBM from 2003-2007 and has since retired from IBM to start his own consulting practice.
The comparison was made between Crossroad Systems' Strongbox® with Enterprise tape library, LTO-5 tapes using LTFS, versus a unified disk storage system offering NAS protocols on high-capacity 3TB drives. The findings: the tape-based archive had nearly 80 percent lower TCO than the disk-based solution!
You don't have to be in the middle of the Greek economy to real that is a good value!
An exciting new addition to the IBM storage line, the Storwize V7000 is a very versatile and solid choice as a midrange storage device. This session will cover a technical overview of the controller as well as its positioning within the overall IBM storage line.
xST04 - XIV Implementation, Migration and Optimization
Attend this session to learn how to integrate the IBM XIV Storage System in your IT environment. After this session, you should understand where the IBM XIV Storage system fits, and understand how to take full advantage of the performance capabilities of XIV Storage by using the massive parallelism of its grid architecture. You will learn how to migrate data onto the XIV and hear about real world client experiences.
xST05 - IBM's Storage Strategy in the Smarter Computing Era
Want to understand IBM's storage strategy better? This session will cover the three key themes of IBM's Smarter Computing initiative: Big Data, Optimized Systems, and Cloud. IBM System Storage strategy has been aligned to meet the storage efficiency, data protection and retention required to meet these challenges.
IBM offers encryption in a variety of ways. Data can be encrypted on the server, in the SAN switch, or on the disk or tape drive. This session will explain how encryption works, and explain the pros and cons with each encryption option.
sAC01 - IBM Information Archive for email, Files and eDiscovery
IBM has focused on data protection and retention, and the IBM Information Archive is the ideal product to achieve it. Come to this session to discuss archive solutions, compliance regulations, and support for full-text indexing and eDiscovery to support litigation.
sGE04 - IBM's Storage Strategy in the Smarter Computing Era
Want to understand IBM's storage strategy better? This session will cover the three key themes of IBM's Smarter Computing initiative: Big Data, Optimized Systems, and Cloud. IBM System Storage strategy has been aligned to meet the storage efficiency, data protection and retention required to meet these challenges.
sSM03 - IBM Tivoli Storage Productivity Center – Overview and Update
IBM's latest release of IBM Tivoli Storage Productivity Center is v4.2.2, a storage resource management tool that manages both IBM and non-IBM storage devices, including disk systems, tape libraries, and SAN switches. This session will give an overview of the various components of Tivoli Storage Productivity Center and provide an update on what's new in this product.
sSN06 - SONAS and the Smart Business Storage Cloud (SBSC)
Confused over IBM's Cloud strategy? Trying to figure out how IBM Storage plays in private, hybrid or public cloud offerings? This session will cover both the SONAS integrated appliance and the Smart Business Storage Cloud customized solution, and will review available storage services on the IBM Cloud.
sTA01 - Tape Storage Reinvented: What's New and Exciting in the Tape World?
This very informative session will keep you up to date with the latest tape developments. These include the TS3500 tape library connector Model SC1 (Shuttle). The shuttle enables extreme scalability of over 300,000 tape cartridges in a single library image by interconnecting multiple tape libraries with a unique, high speed transport system. The world's fastest tape drive, the TS1140 3592-E07, will also be presented. The performance and functionality of the new TS1140 as well as the new 4TB tape media will be discussed. Also, the IBM System Storage Linear Tape File System (LTFS), including the Library Edition, will be presented. LTFS allows a disk-like, drag-and-drop interface for tape. This is a not-to-be-missed session for all you tape lovers out there!
In December, I will be going to Gartner's Data Center Conference in Las Vegas, but the agenda has not been finalized, so I will save that for another post.