Modified by TonyPearson
For the longest time, people thought that humans could not run a mile in less than four minutes. Then, in 1954, [Sir Roger Bannister] beat that perception, and shortly thereafter, once he showed it was possible, many other runners were able to achieve this also. The same is being said now about the IBM Watson computer which appeared this week against two human contestants on Jeopardy!
(2014 Update: A lot has happened since I originally wrote this blog post! I intended this as a fun project for college students to work on during their summer break. However, IBM is concerned that some businesses might be led to believe they could simply stand up their own systems based entirely on open source and internally developed code for business use. IBM recommends instead the [IBM InfoSphere BigInsights] which packages much of the software described below. IBM has also launched a new "Watson Group" that has [Watson-as-a-Service] capabilities in the Cloud. To raise awareness to these developments, IBM has asked me to rename this post from IBM Watson - How to build your own "Watson Jr." in your basement to the new title IBM Watson -- How to replicate Watson hardware and systems design for your own use in your basement. I also took this opportunity to improve the formatting layout.)
Often, when a company demonstrates new techology, these are prototypes not yet ready for commercial deployment until several years later. IBM Watson, however, was made mostly from commercially available hardware, software and information resources. As several have noted, the 1TB of data used to search for answers could fit on a single USB drive that you buy at your local computer store.
But could you fit an entire Watson in your basement? The IBM Power 750 servers used in IBM Watson earned the [EPA Energy Star] rating, and is substantially [more energy-efficient than comparable 4-socket x86, Itanium, or SPARC servers]. However, having ninety of them in your basement would drive up your energy bill.
That got me thinking, would it be possible to build your own question-answering system, something less fancy, less sophisticated, scaled-down for personal use? John Pultorak explained [how to build your own Apollo Guidance Computer (AGC) in your basement]. Jay Shafer explains [how to build your own house for $20K]. And a 17-year-old George Hotz figured out a [hack to unlock your Apple iPhone] over the summer in his basement.
It turns out that much of the inner workings of IBM Watson were written in a series of articles in [IBM Systems Journal, Vol. 43, No. 3]. You can also read the [Wikipedia article]. Eric Brown from IBM Research will be presenting "Jeopardy: Under the Hood of IBM Watson Supercomputer" at next month's [The Linux Foundation End User Summit].
Take a look at the [IBM Research Team] to determine how the project was organized. Let's decide what we need, and what we don't in our version for personal use:
Do we need it for personal use?
Yes, That's you. Assuming this is a one-person project, you will act as Team Lead.
Yes, I hope you know computer programming!
No, since this version for personal use won't be appearing on Jeopardy, we won't need strategy on wager amounts for the Daily Double, or what clues to pick next. Let's focus merely on a computer that can accept a question in text, and provide an answer back, in text.
Yes, this team focused on how to wire all the hardware together. We need to do that, although this version for personal use will have fewer components.
Optional. For now, let's have this version for personal use just return its answer in plain text. Consider this Extra Credit after you get the rest of the system working. Consider using [eSpeak], [FreeTTS], or the Modular Architecture for Research on speech sYnthesis [MARY] Text-to-Speech synthesizers.
Yes, I will explain what this is, and why you need it.
Yes, we will need to get information for personal use to process
Yes, this team developed a system for parsing the question being asked, and to attach meaning to the different words involved.
No, this team focused on making IBM Watson optimized to answer in 3 seconds or less. We can accept a slower response, so we can skip this.
Yes, even for a one-person project, having a little "project management" never hurt anyone. I highly recommend the book [Getting Things Done: The Art of Stress-Free Productivity] by David Allen].
(Disclaimer: As with any Do-It-Yourself (DIY) project, I am not responsible if you are not happy with your version for personal use I am basing the approach on what I read from publicly available sources, and my work in Linux, supercomputers, XIV, and SONAS. For our purposes, this version for personal use is based entirely on commodity hardware, open source software, and publicly available sources of information. Your implementation will certainly not be as fast or as clever as the IBM Watson you saw on television.)
Step 1: Buy the Hardware
Supercomputers are built as a cluster of identical compute servers lashed together by a network. You will be installing Linux on them, so if you can avoid paying extra for Microsoft Windows, that would save you some money. Here is your shopping list:
Three x86 hosts, with the following:
64-bit quad-core processor, either Intel-VT or AMD-V capable,
8GB of DRAM, or larger
300GB of hard disk, or larger
CD or DVD Read/Write drive
Computer Monitor, mouse and keyboard
Ethernet 1GbE 4-port hub, and appropriate RJ45 cables
Surge protector and Power strip
Local Console Monitor (LCM) 4-port switch (formerly known as a KVM switch) and appropriate cables. This is optional, but will make it easier during the development. Once your implementation is operational, you will only need the monitor and keyboard attached to one machine. The other two machines can remain "headless" servers.
Step 2: Establish Networking
IBM Watson used Juniper switches running at 10Gbps Ethernet (10GbE) speeds, but was not connected to the Internet while playing Jeopardy! Instead, these Ethernet links were for the POWER7 servers to talk to each other, and to access files over the Network File System (NFS) protocol to the internal customized SONAS storage I/O nodes.
The implementation will be able to run "disconnected from the Internet" as well. However, you will need Internet access to download the code and information sources. For our purposes, 1GbE should be sufficient. Connect your Ethernet hub to your DSL or Cable modem. Connect all three hosts to the Ethernet switch. Connect your keyboard, video monitor and mouse to the LCM, and connect the LCM to the three hosts.
Step 3: Install Linux and Middleware
To say I use Linux on a daily basis is an understatement. Linux runs on my Android-based cell phone, my laptop at work, my personal computers at home, most of our IBM storage devices from SAN Volume Controller to XIV to SONAS, and even on my Tivo at home which recorded my televised episodes of Jeopardy!
For this project, you can use any modern Linux distribution that supports KVM. IBM Watson used Novel SUSE Linux Enterprise Server [SLES 11]. Alternatively, I can also recommend either Red Hat Enterprise Linux [RHEL 6] or Canonical [Ubuntu v10]. Each distribution of Linux comes in different orientations. Download the the 64-bit "ISO" files for each version, and burn them to CDs.
Graphical User Interface (GUI) oriented, often referred to as "Desktop" or "HPC-Head"
Command Line Interface (CLI) oriented, often referred to as "Server" or "HPC-Compute"
Guest OS oriented, to run in a Hypervisor such as KVM, Xen, or VMware. Novell calls theirs "Just Enough Operating System" [JeOS].
For this version for personal use, I have chosen a [multitier architecture], sometimes referred to as an "n-tier" or "client/server" architecture.
Host 1 - Presentation Server
For the Human-Computer Interface [HCI], the IBM Watson received categories and clues as text files via TCP/IP, had a [beautiful avatar] representing a planet with 42 circles streaking across in orbit, and text-to-speech synthesizer to respond in a computerized voice. Your implementation will not be this sophisticated. Instead, we will have a simple text-based Query Panel web interface accessible from a browser like Mozilla Firefox.
Host 1 will be your Presentation Server, the connection to your keyboard, video monitor and mouse. Install the "Desktop" or "HPC Head Node" version of Linux. Install [Apache Web Server and Tomcat] to run the Query Panel. Host 1 will also be your "programming" host. Install the [Java SDK] and the [Eclipse IDE for Java Developers]. If you always wanted to learn Java, now is your chance. There are plenty of books on Java if that is not the language you normally write code.
While three little systems doesn't constitute an "Extreme Cloud" environment, you might like to try out the "Extreme Cloud Administration Tool", called [xCat], which was used to manage the many servers in IBM Watson.
Host 2 - Business Logic Server
Host 2 will be driving most of the "thinking". Install the "Server" or "HPC Compute Node" version of Linux. This will be running a server virtualization Hypervisor. I recommend KVM, but you can probably run Xen or VMware instead if you like.
Host 3 - File and Database Server
Host 3 will hold your information sources, indices, and databases. Install the "Server" or "HPC Compute Node" version of Linux. This will be your NFS server, which might come up as a question during the installation process.
Technically, you could run different Linux distributions on different machines. For example, you could run "Ubuntu Desktop" for host 1, "RHEL 6 Server" for host 2, and "SLES 11" for host 3. In general, Red Hat tries to be the best "Server" platform, and Novell tries to make SLES be the best "Guest OS".
My advice is to pick a single distribution and use it for everything, Desktop, Server, and Guest OS. If you are new to Linux, choose Ubuntu. There are plenty of books on Linux in general, and Ubuntu in particular, and Ubuntu has a helpful community of volunteers to answer your questions.
Step 4: Download Information Sources
You will need some documents for your implementation to process.
IBM Watson used a modified SONAS to provide a highly-available clustered NFS server. For this version, we won't need that level of sophistication. Configure Host 3 as the NFS server, and Hosts 1 and 2 as NFS clients. See the [Linux-NFS-HOWTO] for details. To optimize performance, host 3 will be the "official master copy", but we will use a Linux utility called rsync to copy the information sources over to the hosts 1 and 2. This allows the task engines on those hosts to access local disk resources during question-answer processing.
We will also need a relational database. You won't need a high-powered IBM DB2. Your implementation can do fine with something like [Apache Derby] which is the open source version of IBM CloudScape from its Informix acquisition. Set up Host 3 as the Derby Network Server, and Hosts 1 and 2 as Derby Network Clients. For more about structured content in relational databases, see my post [IBM Watson - Business Intelligence, Data Retrieval and Text Mining].
Linux includes a utility called wget which allows you to download content from the Internet to your system. What documents you decide to download is up to you, based on what types of questions you want answered. For example, if you like Literature, check out the vast resources at [FullBooks.com]. You can automate the download by writing a shell script or program to invoke wget to all the places you want to fetch data from. Rename the downloaded files to something unique, as often they are just "index.html". For more on wget utility, see [IBM Developerworks].
Step 5: The Query Panel - Parsing the Question
Next, we need to parse the question and have some sense of what is being asked for. For this we will use [OpenNLP] for Natural Language Processing, and [OpenCyc] for the conceptual logic reasoning. See Doug Lenat presenting this 75-minute video [Computers versus Common Sense]. To learn more, see the [CYC 101 Tutorial].
Unlike Jeopardy! where Alex Trebek provides the answer and contestants must respond with the correct question, we will do normal Question-and-Answer processing. To keep things simple, we will limit questions to the following formats:
Who is ...?
Where is ...?
When did ... happen?
What is ...?
Host 1 will have a simple Query Panel web interface. At the top, a place to enter your question, and a "submit" button, and a place at the bottom for the answer to be shown. When "submit" is pressed, this will pass the question to "main.jsp", the Java servlet program that will start the Question-answering analysis. Limiting the types of questions that can be posed will simplify hypothesis generation, reduce the candidate set and evidence evaluation, allowing the analytics processing to continue in reasonable time.
Step 6: Unstructured Information Management Architecture
The "heart and soul" of IBM Watson is Unstructured Information Management Architecture [UIMA]. IBM developed this, then made it available to the world as open source. It is maintained by the [Apache Software Foundation], and overseen by the Organization for the Advancement of Structured Information Standards [OASIS].
Basically, UIMA lets you scan unstructured documents, gleam the important points, and put that into a database for later retrieval. In the graph above, DBs means 'databases' and KBs means 'knowledge bases'. See the 4-minute YouTube video of [IBM Content Analytics], the commercial version of UIMA.
Starting from the left, the Collection Reader selects each document to process, and creates an empty Common Analysis Structure (CAS) which serves as a standardized container for information. This CAS is passed to Analysis Engines , composed of one or more Annotators which analyze the text and fill the CAS with the information found. The CAS are passed to CAS Consumers which do something with the information found, such as enter an entry into a database, update an index, or update a vote count.
(Note: This point requires, what we in the industry call a small matter of programming, or [SMOP]. If you've always wanted to learn Java programming, XML, and JDBC, you will get to do plenty here. )
If you are not familiar with UIMA, consider this [UIMA Tutorial].
Step 7: Parallel Processing
People have asked me why IBM Watson is so big. Did we really need 2,880 cores of processing power? As a supercomputer, the 80 TeraFLOPs of IBM Watson would place it only in 94th place on the [Top 500 Supercomputers]. While IBM Watson may be the [Smartest Machine on Earth], the most powerful supercomputer at this time is the Tianhe-1A with more than 186,000 cores, capable of 2,566 TeraFLOPs.
To determine how big IBM Watson needed to be, the IBM Research team ran the DeepQA algorithm on a single core. It took 2 hours to answer a single Jeopardy question! Let's look at the performance data:
Number of cores
Time to answer one Jeopardy question
Single IBM Power750 server
< 4 minutes
Single rack (10 servers)
< 30 seconds
IBM Watson (90 servers)
< 3 seconds
The old adage applies, [many hands make for light work]. The idea is to divide-and-conquer. For example, if you wanted to find a particular street address in the Manhattan phone book, you could dispatch fifty pages to each friend and they could all scan those pages at the same time. This is known as "Parallel Processing" and is how supercomputers are able to work so well. However, not all algorithms lend well to parallel processing, and the phrase [nine women can't have a baby in one month] is often used to remind us of this.
Fortuantely, UIMA is designed for parallel processing. You need to install UIMA-AS for Asynchronous Scale-out processing, an add-on to the base UIMA Java framework, supporting a very flexible scale-out capability based on JMS (Java Messaging Services) and ActiveMQ. We will also need Apache Hadoop, an open source implementation used by Yahoo Search engine. Hadoop has a "MapReduce" engine that allows you to divide the work, dispatch pieces to different "task engines", and the combine the results afterwards.
Host 2 will run Hadoop and drive the MapReduce process. Plan to have three KVM guests on Host 1, four on Host 2, and three on Host 3. That means you have 10 task engines to work with. These task engines can be deployed for Content Readers, Analysis Engines, and CAS Consumers. When all processing is done, the resulting votes will be tabulated and the top answer displayed on the Query Panel on Host 1.
Step 8: Testing
To simplify testing, use a batch processing approach. Rather than entering questions by hand in the Query Panel, generate a long list of questions in a file, and submit for processing. This will allow you to fine-tune the environment, optimize for performance, and validate the answers returned.
There you have it. By the time you get your implementation fully operational, you will have learned a lot of useful skills, including Linux administration, Ethernet networking, NFS file system configuration, Java programming, UIMA text mining analysis, and MapReduce parallel processing. Hopefully, you will also gain an appreciation for how difficult it was for the IBM Research team to accomplish what they had for the Grand Challenge on Jeopardy! Not surprisingly, IBM Watson is making IBM [as sexy to work for as Apple, Google or Facebook], all of which started their business in a garage or a basement with a system as small as this version for personal use.
technorati tags: IBM, Watson, Jeopardy, Challenge, POWER7, EPA, Energy Star, RHEL, SLES, Ubuntu, Linux, UIMA, Hadoop, MapReduce, KVM, DeepQA, Roger Bannister, John Pultorak, Jay Shafer, George Hotz
, Eric Brown
After my response to Jon Toigo on Drunken Data
withmy post [Elevenanswers about Deduplication
], Jon follows up with a request to validate the numbersquoted in the February 26 Press Release[IBM launches New “System z10” Mainframe
], particularly the estimate that a single mainframecan handle to the workload of 1500 x86 servers, in his post[A Bit More Blegging
]. The timing is perfect in that IBM launched[the next wave of Project Big Green
] today.To avoid sounding like an [editorial from the New York Sun
],I checked the facts, and spoke to the person in IBM who did all the calculations. Jon, as always, you have my permissionto publish this on your site if you want.
( I cannot take credit for coining the new term "bleg". I saw this term firstused over on the [FreakonomicsBlog]. If you have not yet read the book "Freakonomics", I highly recommend it! The authors' blog is excellent as well.)
For this comparison, it is important to figure out how much workload a mainframe can support, how much an x86 cansupport, and then divide one from the other. Sounds simple enough, right? And what workload should you choose?IBM chose a business-oriented "data-intensive" workload using Oracle database. (If you wanted instead a scientific"compute-intensive" workload, consider an [IBM supercomputer] instead, the most recent of which clocked in over 1 quadrillion floating point operations per second, or PetaFLOP.) IBM compares the following two systems:
- Sun Fire X2100 M2, model 1220 server (2-way)
IBM did not pick a wimpy machine to compare against. The model 1220 is the fastest in the series, with a 2.8Ghz x86-64 dual-core AMD Opteron processor, capable of running various levels of Solaris, Linux or Windows.In our case, we will use Oracle workloads running on Red Hat Enterprise Linux.All of the technical specifications are available at the[Sun Microsystems Sun Fire X1200] Web site.I am sure that there are comparable models from HP, Dell or even IBM that could have been used for this comparison.
- IBM z10 Enterprise Class mainframe model E64 (64-way)
This machine can run a variety of operating systems also, including Red Hat Enterprise Linux (RHEL). The E64 has four "multiple processor modules" called"processor books" for a total of 77 processing units: 64 central processors, 11 system assist processors (SAP) and 2 spares. That's right, spare processors, in case any others gobad, IBM has got your back. You can designate a central processor in a variety of flavors. For running z/VM and Linux operating systems, the central processors can be put into "Integrated Facility for Linux" (IFL) mode.On IT Jungle, Timothy Patrick Morgan explains the z10 EC in his article[IBM Launches 64-Way z10 Enterprise Class Mainframe Behemoth]. For more information on the z10 EC, see the 110-page [Technical Introduction], orread the specifications on the[IBM z10 EC] Web site.
Moving Oracle workloads from x86 over to mainframe is quite commonsince [IBM and Cisco joined forces to meet Linux On Mainframe demand]. For more information on consolidating x86 servers running Oracle over to a mainframe, read the [Quick Reference], IBMRedbook titled ["Using Oracle Solutionson Linux for System z"], or this [presentation by Jim Elliott, IBM System z Specialist].
In a shop full of x86 servers, there are production servers, test and development servers, quality assuranceservers, standby idle servers for high availability, and so on. On average, these are only 10 percent utilized.For example, consider the following mix of servers:
- 125 Production machines running 70 percent busy
- 125 Backup machines running idle ready for active failover in case a production machine fails
- 1250 machines for test, development and quality assurance, running at 5 percent average utilization
While [some might question, dispute or challenge thisten percent] estimate, it matches the logic used to justify VMware, XEN, Virtual Iron or other virtualization technologies. Running 10 to 20 "virtual servers" on a single physical x86 machine assumes a similar 5-10 percent utilization rate.
Note: The following paragraphs have been revised per comments received.
|Now the math. Jon, I want to make it clear I was not involved in writing the press release nor assisted with thesemath calculations. Please, don't shoot the messenger! Remember this cartoon where two scientists in white lab coats are writing mathcalculations on a chalkboard, and in the middle there is "and then a miracle happens..." to continue the rest ofthe calculations?|
In this case, the miracle is the number that compares one server hardware platform to another. I am not going to bore people with details like the number of concurrent processor threads or the differencesbetween L1 and L3 cache. IBM used sophisticated tools and third party involvement that I am not allowed to talk about, and I have discussed this post with lawyers representing
four (now five) different organizations already,so for the purposes of illustration and explanation only, I have reverse-engineered a new z10-to-Opteron conversion factor as 6.866 z10 EC MIPS per GHz of dual-core AMD Opteron for I/O-intensive workloads running only 10 percent average CPU utilization. Business applications that perform a lot of I/O don't use their CPU as much as other workloads.For compute-intensive or memory-intensive workloads, the conversion factor may be quite different, like 200 MIPS per GHz, as Jeff Savit from Sun Microsystems points out in the comments below.
Keep in mind that each processor is different, and we now have Intel, AMD, SPARC, PA-RISC and POWER (and others); 32-bit versus 64-bit; dual-core and quad-core; and different co-processor chip sets to worry about. AMD Opteron processors come in different speeds, but we are comparing against the 2.8GHz, so 1500 times 6.866 times 2.8 is 28,337. Since these would be running as Linux guestsunder z/VM, we add an additional 7 percent overhead or 2,019 MIPS. We then subtract 15 percent for "smoothing", whichis what happens when you consolidate workloads that have different peaks and valleys in workload, or 4,326 MIPS.The end is that we need a machine to do 26,530 MIPS. Thanks to advances in "Hypervisor" technological synergy between the z/VM operating system and the underlying z10 EC hardware, the mainframe can easily run 90 percent utilized when aggregating multiple workloads, so a 29,477 MIPS machine running at 90 percent utilization can handle these 26,530 MIPS.
N-way machines, from a little 2-way Sun Fire X2100 to the might 64-way z10 EC mainframe, are called "Symmetric Multiprocessors". All of the processors or cores are in play, but sometimes they have to taketurns, wait for exclusive access on a shared resource, such as cache or the bus. When your car is stopped at a red light, you are waiting for your turn to use the shared "intersection". As a result, you don't get linear improvement, but rather you get diminishing returns. This is known generically as the "SMP effect", and in IBM documentsthis as [Large System Performance Reference].While a 1-way z10 EC can handle 920 MIPS, the 64-way can only handle30,657 MIPS. The 29,477 MIPS needed for the Sun x2100 workload can be handled by a 61-way, giving you three extraprocessors to handle unexpected peaks in workload.
But are 1500 Linux guest images architecturally possible? A long time ago, David Boyes of[Sine Nomine Associates] ran 41,400 Linux guest images on a single mainframe using his [Test Plan Charlie], and IBM internallywas able to get 98,000 images, and in both cases these were on machines less powerful than the z10 EC. Neitherof these were tests ran I/O intensive workloads, but extreme limits are always worth testing. The 1500-to-1 reduction in IBM's press release is edge-of-the-envelope as well, so in production environments, several hundred guest images are probably more realistic, and still offer significant TCO savings.
The z10 EC can handle up to 60 LPARs, and each LPAR can run z/VM which acts much like VMware in allowing multipleLinux guests per z/VM instance. For 1500 Linux guests, you could have 25 guests each on 60 z/VM LPARs, or 250 guests on each of six z/VM LPARs, or 750 guests on two LPARs. with z/VM 5.3, each LPAR can support up to 256GB of memory and 32 processors, so you need at least two LPAR to use all 64 engines. Also, there are good reasons to have different guests under different z/VM LPARs, such as separating development/test from production workloads. If you had to re-IPLa specific z/VM LPAR, it could be done without impacting the workloads on other LPARs.
To access storage, IBM offers N-port ID Virtualization (NPIV). Without NPIV, two Linux guest images could not accessthe same LUN through the same FCP port because this would confuse the Host Bus Adapter (HBA), which IBM calls "FICON Express" cards. For example, Linux guest 1 asks to read LUN 587 block 32 and this is sent out a specific port, to a switch, to a disk system. Meanwhile, Linux guest 2 asks to read LUN 587 block 49. The data comes back to the z10 EC with the data, gives it to the correct z/VM LPAR, but then what? How does z/VM know which of the many Linux guests to give the data to? Both touched the same LUN, so it is unclear which made the request. To solve this, NPIV assigns a virtual "World Wide Port Name" (WWPN), up to 256 of them per physical port, so you can have up to 256 Linux guests sharing the same physical HBA port to access the same LUN.If you had 250 guests on each of six z/VM LPARs, and each LPAR had its own set of HBA ports, then all 1500 guestscould access the same LUN.
Yes, the z10 EC machines support Sysplex. The concept is confusing, but "Sysplex" in IBM terminology just means that you can have LPARs either on the same machine or on separate mainframes, all sharing the same time source, whether this be a "Sysplex Timer" or by using the "Server Time Protocol" (STP). The z10 EC can have STP over 6 Gbps Infiniband over distance. If you wantedto have all 1500 Linux guests time stamp data identically, all six z/VM LPARs need access to the shared time source. This can help in a re-do or roll-back situation for Oracle databases to complete or back-out "Units of Work" transactions. This time stamp is also used to form consistency groups in "z/OS Global Mirror", formerly called "XRC" for Extended Remote Distance Copy. Currently, the "timestamp" on I/O applies only to z/OS and Linux and not other operating systems. (The time stamp is done through the CDK driver on Linux, and contributed back to theopen source community so that it is available from both Novell SUSE and Red Hat distributions.)To have XRC have consistency between z/OS and Linux, the Linux guests would need to access native CKD volumes,rather than VM Minidisks or FCP-oriented LUNs.
Note: this is different than "Parallel Sysplex" which refers to having up to 32 z/OS images sharing a common "Coupling Facility" which acts as shared memory for applications. z/VM and Linux do not participate in"Parallel Sysplex".
As for the price, mainframes list for as little as "six figures" to as much as several million dollars, but I have no idea how much this particular model would cost. And, of course, this is just the hardware cost. I could not find the math for the $667 per server replacement you mentioned, so don't have details on that.You would need to purchase z/VM licenses, and possibly support contracts for Linux on System z to be fully comparable to all of the software license and support costs of the VMware, Solaris, Linux and/or Windows licenses you run on the x86 machines.
This is where a lot of the savings come from, as a lot of software is licensed "per processor" or "per core", and so software on 64 mainframe processors can be substantially less expensive than 1500 processors or 3000 cores.IBM does "eat its own cooking" in this case. IBM is consolidating 3900 one-application-each rack-mounted serversonto 30 mainframes, for a ratio of 130-to-1 and getting amazingly reduced TCO. The savings are in the followingareas:
- Hardware infrastructure. It's not just servers, but racks, PDUs, etc. It turns out to be less expensive to incrementally add more CPU and storage to an existing mainframe than to add or replace older rack-em-and-stack-emwith newer models of the same.
- Cables. Virtual servers can talk to each other in the same machine virtually, such as HiperSockets, eliminatingmany cables. NPIV allows many guests to share expensive cables to external devices.
- Networking ports. Both LAN and SAN networking gear can be greatly reduced because fewer ports are needed.
- Administration. We have Universities that can offer a guest image for every student without having a majorimpact to the sys-admins, as the students can do much of their administration remotely, without having physicalaccess to the machinery. Companies uses mainframe to host hundreds of virtual guests find reductions too!
- Connectivity. Consolidating distributed servers in many locations to a mainframe in one location allows youto reduce connections to the outside world. Instead of sixteen OC3 lines for sixteen different data centers, you could have one big OC48 line instead to a single data center.
- Software licenses. Licenses based on servers, cores or CPUs are reduced when you consolidate to the mainframe.
- Floorspace. Generally, floorspace is not in short supply in the USA, but in other areas it can be an issue.
- Power and Cooling. IBM has experienced significant reduction in power consumption and cooling requirementsin its own consolidation efforts.
All of the components of DFSMS (including DFP, DFHSM, DFDSS and DFRMM) were merged into a single product "DFSMS for z/OS" and is now an included element in the base z/OS operating system. As a result of these, customers typically have 80 to 90 percent utilization on their mainframe disk. For the 1500 Linux guests, however, most of the DFSMS features of z/OS do not apply. These functions were not "ported over" to z/VM nor Linux on any platform.
Note: DFSMS can backup or dump Linux on System z partitions or volumes. See this [Appendix C. HOWTO backup Linux data through z/OS] for details.
Instead, the DFSMS concepts have been re-implemented into a new product called "Scale-Out File Services" (SOFS) which would provide NAS interfaces to a blendeddisk-and-tape environment. The SOFS disk can be kept at 90 percent utilization because policies can place data, movedata and even expire files, just like DFSMS does for z/OS data sets. SOFS supports standard NAS protocols such as CIFS,NFS, FTP and HTTP, and these could be access from the 1500 Linux guests over an Ethernet Network Interface Card (NIC), which IBM calls "OSA Express" cards.
Lastly, IBM z10 EC is not emulating x86 or x86-64 interfaces for any of these workloads. No doubt IBM and AMD could collaborate together to come up with an AMD Opteron emulator for the S/390 chipset, and load Windows 2003 right on top of it, but that would just result in all kinds of emulation overhead.Instead, Linux on System z guests can run comparable workloads. There are many Linux applications that are functionally equivalent or the same as their Windows counterparts. If you run Oracle on Windows, you could runOracle on Linux. If you run MS Exchange on Windows, you could run Bynari on Linux and let all of your Outlook Expressusers not even know their Exchange server had been moved! Linux guest images can be application servers, web servers, database servers, network infrastructure servers, file servers, firewall, DNS, and so on. For nearly any business workload you can assign to an x86 server in a datacenter, there is likely an option for Linux on System z.
Hope this answers all of your questions, Jon. These were estimates based on basic assumptions. This is not to imply that IBM z10 EC and VMware are the only technologies that help in this area, you can certainly find virtualization on other systems and through other software.I have asked IBM to make public the "TCO framework" that sheds more light on this.As they say, "Your mileage may vary."
For more on this series, check out the following posts:
If in your travels, Jon, you run into someone interested to see how IBM could help consolidate rack-mounted servers over to a z10 EC mainframe, have them ask IBM for a "Scorpion study". That is the name of the assessment that evaluates a specific clientsituation, and can then recommend a more accurate estimate configuration.
technorati tags: Jon Toigo, DrunkenData, bleg, IBM, z10, EC, E64, mainframe, x86, AMD, Opteron, Sun, Fire, X2100, petaFLOP, Freakonomics, Red Hat, RHEL, IFL, VMware, Jim Elliott, Xen, Virtual Iron, Solaris, Linux, Windows, Project Big Green, Infiniband, STP, Sysplex, Scorpion study, MS Exchange, Bynari, Oracle
A reader of my blog asked me what seemed like a simple enough question:
Whatever happened to Lotus Approach? I loved that personal db. (thoughit's been awhile...)
Of course, researching an answer, I encountered some interesting new information. Interestingly, everyone tries to "read between the lines" and tries to determine what solution is best.
From a colleague from Lotus:
You can still get [Lotus Approach] as part of Smartsuite.
However, I have to assume his real question is ... "what is the quick and easy way for me to build a lightweight database app like Microsoft Access that I can distribute as a standalone executable?"
To which I would say "Lotus has a program called Approach, which is part of Lotus SmartSuite, which some people still use. However, a lot of the focus in IBM now centers around the lightweight Cloudscape database which IBM acquired from Informix, which is now known as the [open source project called Derby]. Many IBM and Lotus products, such as Lotus Expeditor use the JDBC connection to Derby, which allows you to use Windows, Linux, Flash, etc. ... with no vendor lock in".
I am familiar with Cloudscape, and I evaluated it as a potential database for IBM TotalStorage Productivity Center, when I was the lead architect defining the version 1 release. It runs entirely on Java, which is both a plus and minus. Plus in that it runs anywhere Java runs, but a minus in that it is not optimized for high performance or large scalability. Because of this, we decided instead on using the full commercial DB2 database instead for Productivity Center.
Not to be undone, my colleagues over at DB2 offered a different alternative, [DB2 Express-C], which runs on a variety of Windows, Linux-x86, and Linux on POWER platforms. It is "free" as in beer, not free as in speech, which means you can download and use it today at no charge, and even ship products with it included, but you are not allowed to modify and distribute altered versions of it, as you can with "free as in speech" open source code, as in the case of Derby above (see [Apache License 2.0"] for details).
(If you have no idea what I am talking about in my distinction between "free speech" and "free beer", see Simon Phipps' article[Perspective: Free speech, free beer and free software] orthe definition from the [Free Software Foundation].)
As I see it, DB2 Express-C has two key advantages. First, if you like the free version, you can purchase a "support contract" for those that need extra hand-holding, or are using this as part of a commercial business venture. Second,for those who do prefer vendor lock-in, it is easyto upgrade Express-C to the full IBM DB2 database product, so if you are developing a product intended for use with DB2, you can develop it first with DB2 Express-C, and migrate up to full DB2 commercial version when you are ready.
This is perhaps more information than you probably expected for such a simple question. Meanwhile, I am stilltrying to figure out MySQL as part of my [OLPC volunteer project].
technorati tags: IBM, Lotus, Approach, SmartSuite, TotalStorage, Productivity Center, Cloudscape, Apache, Derby, free, speech, beer, DB2, Express-C, Windows, Linux, POWER, open source
Wrapping up my coverage of the annual [2010 System Storage Technical University], I attended what might be perhaps the best session of the conference. Jim Nolting, IBM Semiconductor Manufacturing Engineer, presented the new IBM zEnterprise mainframe, "A New Dimension in Computing", under the Federal track.
The zEnterprises debunks the "one processor fits all" myth. For some I/O-intensive workloads, the mainframe continues to be the most cost-effective platform. However, there are other workloads where a memory-rich Intel or AMD x86 instance might be the best fit, and yet other workloads where the high number of parallel threads of reduced instruction set computing [RISC] such as IBM's POWER7 processor is more cost-effective. The IBM zEnterprise combines all three processor types into a single system, so that you can now run each workload on the processor that is optimized for that workload.
- IBM zEnterprise z196 Central Processing Complex (CPC)
Let's start with the new mainframe z196 central processing complex (CPC). Many thought this would be called the z11, but that didn't happen. Basically, the z196 machine has a maximum 96 cores versus z10's 64 core maximum, and each core runs 5.2GHz instead of z10's cores running at 4.7GHz. It is available in air-cooled and water-cooled models. The primary operating system that runs on this is called "z/OS", which when used with its integrated UNIX System Services subsystem, is fully UNIX-certified. The z196 server can also run z/VM, z/VSE, z/TPF and Linux on z, which is just Linux recompiled for the z/Architecture chip set. In my June 2008 post [Yes, Jon, there is a mainframe that can help replace 1500 servers], I mentioned the z10 mainframe had a top speed of nearly 30,000 MIPS (Million Instructions per Second). The new z196 machine can do 50,000 MIPS, a 60 percent increase!
(Update: Back in 2007, IBM and Sun mutually supported [OpenSolaris on an IBM System z mainframe]. Unfortunately, after Oracle acquired Sun, the OpenSolaris Governing Board has [grown uneasy over Oracle's silence] about the future of OpenSolaris on any platform. The OpenSolaris [download site] identifies 2009.06 as the latest release, but only for x86 and SPARC chip sets. Apparently, the 2010.03 release expected five months ago in March has slipped. Now it looks official that [OpenSolaris is Dead].)
The z196 runs a hypervisor called PR/SM that allows the box to be divided into dozens of logical partitions (LPAR), and the z/VM operating system can also act as a hypervisor running hundreds or thousands of guest OS images. Each core can be assigned a specialty engine "personality": GP for general processor, IFL for z/VM and Linux, zAAP for Java and XML processing, and zIIP for database, communications and remote disk mirroring. Like the z9 and z10, the z196 can attach to external disk and tape storage via ESCON, FICON or FCP protocols, and through NFS via 1GbE and 10GbE Ethernet.
- IBM zEnterprise BladeCenter Extension (zBX)
There is a new frame called the zBX that basically holds two IBM BladeCenter chassis, each capable of 14 blades, so total of 28 blades per zBX frame. For now, only select blade servers are supported inside, but IBM plans to expand this to include more as testing continues. The POWER-based blades can run native AIX, IBM's other UNIX operating system, and the x86-based blades can run Linux-x86 workloads, for example. Each of these blade servers can run a single OS natively, or run a hypervisor to have multiple guest OS images. IBM plans to look into running other POWER and x86-based operating systems in the future.
If you are already familiar with IBM's BladeCenter, then you can skip this paragraph. Basically, you have a chassis that holds 14 blades connected to a "mid-plane". On the back of the chassis, you have hot-swappable modules that snap into the other side of the mid-plane. There are modules for FCP, FCoE and Ethernet connectivity, which allows blades to talk to each other, as well as external storage. BladeCenter Management modules serve as both the service processor as well as the keyboard, video and mouse Local Console Manager (LCM). All of the IBM storage options available to IBM BladeCenter apply to zBX as well.
Besides general purpose blades, IBM will offer "accelerator" blades that will offload work from the z196. For example, let's say an OLAP-style query is issued via SQL to DB2 on z/OS. In the process of parsing the complicated query, it creates a Materialized Query Table (MQT) to temporarily hold some data. This MQT contains just the columnar data required, which can then be transferred to a set of blade servers known as the Smart Analytics Optimizer (SAO), then processes the request and sends the results back. The Smart Analytics Optimizer comes in various sizes, from small (7 blades) to extra large (56 blades, 28 in each of two zBX frames). A 14-blade configuration can hold about 1TB of compressed DB2 data in memory for processing.
- IBM zEnterprise Unified Resource Manager
You can have up to eight z196 machines and up to four zBX frames connected together into a monstrously large system. There are two internal networks. The Inter-ensemble data network (IEDN) is a 10GbE that connects all the OS images together, and can be further subdivided into separate virtual LANs (VLAN). The Inter-node management network (INMN) is a 1000 Mbps Base-T Ethernet that connects all the host servers together to be managed under a single pane of glass known as the Unified Resource Manager. It is based on IBM Systems Director.
By integrating service management, the Unified Resource Manager can handle Operations, Energy Management, Hypervisor Management, Virtual Server Lifecycle Management, Platform Performance Management, and Network Management, all from one place.
- IBM Rational Developer for System z Unit Test (RDz)
But what about developers and testers, such as those Independent Software Vendors (ISV) that produce mainframe software. How can IBM make their lives easier?
Phil Smith on z/Journal provides a history of [IBM Mainframe Emulation]. Back in 2007, three emulation options were in use in various shops:
- Open Mainframe, from Platform Solutions, Inc. (PSI)
- FLEX-ES, from Fundamental Software, Inc.
- Hercules, which is an open source package
None of these are viable options today. Nobody wanted to pay IBM for its Intellectual Property on the z/Architecture or license the use of the z/OS operating system. To fill the void, IBM put out an officially-supported emulation environment called IBM System z Professional Development Tool (zPDT) available to IBM employees, IBM Business Partners and ISVs that register through IBM Partnerworld. To help out developers and testers who work at clients that run mainframes, IBM now offers IBM Rational Developer for System z Unit Test, which is a modified version of zPDT that can run on a x86-based laptop or shared IBM System x server. Based on the open source [Eclipse IDE], the RDz emulates GP, IFL, zAAP and zIIP engines on a Linux-x86 base. A four-core x86 server can emulate a 3-engine mainframe.
With RDz, a developer can write code, compile and unit test all without consuming any mainframe MIPS. The interface is similar to Rational Application Developer (RAD), and so similar skills, tools and interfaces used to write Java, C/C++ and Fortran code can also be used for JCL, CICS, IMS, COBOL and PL/I on the mainframe. An IBM study ["Benchmarking IDE Efficiency"] found that developers using RDz were 30 percent more productive than using native z/OS ISPF. (I mention the use of RAD in my post [Three Things to do on the IBM Cloud]).
What does this all mean for the IT industry? First, the zEnterprise is perfectly positioned for [three-tier architecture] applications. A typical example could be a client-facing web-server on x86, talking to business logic running on POWER7, which in turn talks to database on z/OS in the z196 mainframe. Second, the zEnterprise is well-positioned for government agencies looking to modernize their operations and significantly reduce costs, corporations looking to consolidate data centers, and service providers looking to deploy public cloud offerings. Third, IBM storage is a great fit for the zEnterprise, with the IBM DS8000 series, XIV, SONAS and Information Archive accessible from both z196 and zBX servers.
To learn more, see the [12-page brochure] or review the collection of [IBM Redbooks]. Check out the [IBM Conferences schedule] for an event near you. Next year, the IBM Storage University will be held July 18-22, 2011 in Orlando, Flordia.
technorati tags: IBM, Technical University, zEnterprise, x86, POWER7, RISC, z/OS, Linux, AIX, OpenSolaris, Oracle, FICON, NFS, z196, zBX, DB2, SAO, IEDN, INMN, RDz, ISV, Eclipse, Cloud Computing
Continuing my rant from Monday's post [Time for a New Laptop], I got my new laptop Wednesday afternoon. I was hoping the transition would be quick, but that was not the case. Here were my initial steps prior to connecting my two laptops together for the big file transfer:
- Document what my old workstation has
Back in 2007, I wrote a blog post on how to [Separate Programs from Data]. I have since added a Linux partition for dual-boot on my ThinkPad T60.
|/dev/sda1||26GB||NTFS||C:||Windows XP SP3 operating system and programs|
|/dev/sda2||12GB||ext3||/(root)||Red Hat Enterprise Linux 5.4|
|/dev/sda6||80GB||NTFS||D:||My Documents and other data|
I also created a spreadsheet of all my tools, utilities and applications. I combined and deduplicated the list from the following sources:
- Control Panel -> Add/Remove programs
- C:\Program Files
- Start -> Programs panels
- Program taskbar at bottom of screen
The last one was critical. Over the years, I have gotten in the habit of saving those ZIP or EXE files that self-install programs into a separate directory, D:/Install-Files, so that if I had to unintsall an application, due to conflicts or compatability issues, I could re-install it without having to download them again.
So, I have a total of 134 applications, which I have put into the following rough categories:
- AV - editing and manipulating audio, video or graphics
- Files - backup, copy or manipulate disks, files and file systems
- Browser - Internet Explorer, Firefox, Opera and Google Chrome
- Communications - Lotus Notes and Lotus Sametime
- Connect - programs to connect to different Web and Wi-Fi services
- Demo - programs I demonstrate to clients at briefings
- Drivers - attach or sync to external devices, cell phones, PDAs
- Games - not much here, the basic solitaire, mindsweeper and pinball
- Help Desk - programs to diagnose, test and gather system information
- Projects - special projects like Second Life or Lego Mindstorms
- Lookup - programs to lookup information, like American Airlines TravelDesk
- Meeting - I have FIVE different webinar conferencing tools
- Office - presentations, spreadsheets and documents
- Platform - Java, Adobe Air and other application runtime environments
- Player - do I really need SIXTEEN different audio/video players?
- Printer - print drivers and printer management software
- Scanners - programs that scan for viruses, malware and adware
- Tools - calculators, configurators, sizing tools, and estimators
- Uploaders - programs to upload photos or files to various Web services
- Backup my new workstation
My new ThinkPad T410 has a dual-core i5 64-bit Intel processor, so I burned a 64-bit version of [Clonezilla LiveCD] and booted the new system with that. The new system has the following configuration:
|/dev/sda1||320GB||NTFS||C:||Windows XP SP3 operating system, programs and data|
There were only 14.4GB of data, it took 10 minutes to backup to an external USB disk. I ran it twice: first, using the option to dump the entire disk, and the second to dump the selected partition. The results were roughly the same.
- Run Workstation Setup Wizard
The Workstation Setup Wizard asks for all the pertinent location information, time zone, userid/password, needed to complete the installation.
- Re-Partition Disk Drive
I burned a 64-bit version of [System Rescue CD] and ran [Gparted] to re-partition this disk into the following:
|/dev/sda1||40GB||NTFS||C:||Windows XP SP3 operating system and programs|
|/dev/sda2||15GB||ext3||/(root)||Ubuntu Desktop 10.04 LTS|
|/dev/sda6||245GB||NTFS||D:||My Documents and other data|
- Redefine Windows directory structure
I made two small changes to connect C: to D: drive.
- Changed "My Documents" to point to D:\Documents which will move the files over from C: to D: to accomodate its new target location. See [Microsoft procedure] for details.
- Edited C:\notes\notes.ini to point to D:\notes\data to store all the local replicas of my email and databases.
- Install Ubuntu Desktop 10.04 LTS
My plan is to run Windows and Linux guests through virtualization. I decided to try out Ubuntu Desktop 10.04 LTS, affectionately known as Lucid Lynx, which can support a variety of different virtualization tools, including KVM, VirtualBox-OSE and Xen. I have two identical 15GB partitions (sda2 and sda3) that I can use to hold two different systems, or one can be a subdirectory of the other. For now, I'll leave sda3 empty.
- Take another backup of my new workstation
I took a fresh new backup of paritions (sda1, sda2, sda6) with Clonezilla.
The next step involved a cross-over Ethernet cable, which I don't have. So that will have to wait until Thursday morning.
technorati tags: IBM, Lenovo, ThinkPad, T60, T410, Intel, Clonezilla, SysRescCD, Gparted, Windows, Ubuntu, Linux, Lucid, LTS
Are you tired of hearing about Cloud Computing without having any hands-on experience? Here's your chance. IBM has recently launched its IBM Development and Test Cloud beta. This gives you a "sandbox" to play in. Here's a few steps to get started:
- Go to the [IBM Developer & Test in the IBM Cloud beta] dashboard and register for an account. This can be your email address and your own password. You can watch the helpful videos.
- Generate a "key pair". There are two keys. A "public" key that will reside in the cloud, and a "private" key that you download to your personal computer. Don't lose this key.
- Request an IP address. This step is optional, but I went ahead and got a static IP, so I don't have to type in long hostnames like "vm353.developer.ihost.com".
- Request storage space. Again, this step is optional, but you can request a 50GB, 100GB and 200GB LUN. I picked a 200GB LUN. Note that each instance comes with some 10 to 30GB storage already. The advantage to a storage LUN is that it is persistent, and you can mount it to different instances.
- Start an "instance". An "instance" is a virtual machine, pre-installed with whatever software you chose from the "asset catalog". These are Linux images running under Red Hat Enterprise Virtualization (RHEV) which is based on Linux's kernel virtual machine (KVM). When you start an instance, you get to decide its size (small, medium, or large), whether to use your static IP address, and where to mount your storage LUN. On the examples below, I had each instance with a static IP and mounted the storage LUN to /media/storage subdirectory. The process takes a few minutes.
- Download some programs on your personal computer. I downloaded an SSH client called [PuTTY] and an [NX client from NoMachine].
So, now that you are ready to go, what instance should you pick from the catalog? Here are three examples to get you started:
- IBM WebSphere sMASH Application Builder
- Base OS server to run LAMP stack
Next, I decided to try out one of the base OS images. There are a lot of books on Linux, Apache, MySQL and PHP (LAMP) which represents nearly 70 percent of the web sites on the internet. This instance let's you install all the software from scratch. Between Red Hat and Novell SUSE distributions of Linux, Red Hat is focused on being the Hypervisor of choice, and SUSE is focusing on being the Guest OS of choice. Most of the images on the "asset catalog" are based on SLES 10 SP2. However, there was a base OS image of Red Hat Enterprise Linux (RHEL) 5.4, so I chose that.
To install software, you either have to find the appropriate RPM package, or download a tarball and compile from source. To try both methods out, I downloaded tarballs of Apache Web Server and PHP, and got the RPM packages for MySQL. If you just want to learn SQL, there are instances on the asset catalog with DB2 and DB2 Express-C already pre-installed. However, if you are already an expert in MySQL, or are following a tutorial or examples based on MySQL from a classroom textbook, or just want a development and test environment that matches what your company uses in production, then by all means install MySQL.
This is where my SSH client comes in handy. I am able to login to my instance and use "wget" to fetch the appropriate files. An alternative is to use "SCP" (also part of PuTTY) to do a secure copy from your personal computer up to the instance. You will need to do everything via command line interface, including editing files, so I found this [VI cheat sheet] useful. I copied all of the tarballs and RPMs on my storage LUN ( /media/storage ) so as not to have to download them again.
Compiling and configuring them is a different matter. By default, you login as an end user, "idcuser" (which stands for IBM Developer Cloud user). However, sometimes you need "root" level access. Use "sudo bash" to get into root level mode, and this allows you to put the files where they need to be. If you haven't done a configure/make/make install in awhile, here's your chance to relive those "glory days".
In the end, I was able to confirm that Apache, MySQL and PHP were all running correctly. I wrote a simple index.php that invoked phpinfo() to show all the settings were set correctly. I rebooted the instance to ensure that all of the services started at boot time.
- Rational Application Developer over VDI
This last example, I started an instance pre-installed with Rational Application Developer (RAD), which is a full Integrated Development Environment (IDE) for Java and J2EE applications. I used the "NX Client" to launch a virtual desktop image (VDI) which in this case was Gnome on SLES 10 SP2. You might want to increase the screen resolution on your personal computer so that the VDI does not take up the entire screen.
From this VDI, you can launch any of the programs, just as if it were your own personal computer. Launch RAD, and you get the familiar environment. I created a short Java program and launched it on the internal WebSphere Application Server test image to confirm it was working correctly.
If you are thinking, "This is too good to be true!" there is a small catch. The instances are only up and running for 7 days. After that, they go away, and you have to start up another one. This includes any files you had on the local disk drive. You have a few options to save your work:
- Copy the files you want to save to your storage LUN. This storage LUN appears persistent, and continues to exist after the instance goes away.
- Take an "image" of your "instance", a function provided in the IBM Developer and Test Cloud. If you start a project Monday morning, work on it all week, then on Friday afternoon, take an "image". This will shutdown your instance, and backup all of the files to your own personal "asset catalog" so that the next time you request an instance, you can chose that "image" as the starting point.
Another option is to request an "extension" which gives you another 7 days for that instance. You can request up to five unique instances running at the same time, so if you wanted to develop and test a multi-host application, perhaps one host that acts as the front-end web server, another host that does some kind of processing, and a third host that manages the database, this is all possible. As far as I can tell, you can do all the above from either a Windows, Mac or Linux personal computer.
Getting hands-on access to Cloud Computing really helps to understand this technology!
technorati tags: , IBM, Development, Test, Cloud, WebSphere, sMASH, WaveMaker, LAMP, Linux, Apache, MySQL, PHP, Rational, RAD, VDI, , RHEL, RHEV, KVM, SUSE, SLES, Novell, NX, PuTTY, SSH
Last week, I got the following comment from Bob Swann:
I am looking for the IBM VM Poster or a picture of the IBM VM "Catch the Wave"
Do you know where I might find it?
Well, Bob, I made some phone calls. The company that published these posters no longer exists, butI found a coworker at the Poughkeepsie Briefing Center who still had the poster on his wall, and he was kind enough to take a picture of it for you.
|VM: The Wave of the Future|
(click thumbnail at left to see larger image)
Some may recognize this as a [mash-up] using as a base the famous Japanese 10-inch by 15-inch block print[The Great Wave off Kanagawa] byartist [Katsushika Hokusai]. I had this as my laptop'swallpaper screen image until last year when I was presenting in Kuala Lumpur, Malaysia. I was told that it reminded people about the horrible tsunami caused by the [Indian Ocean earthquake] back in 2004.I was actually scheduled to fly the last week of December 2004 to Jakarta, Indonesia, but at the last minute ourclient team changed plans. I would have been on route over the Pacific ocean when the tsunami hit, and probably stranded over there for weeks or months until the airports re-opened.
The Wave theme was in part to honor the IBM users group called World Alliance VSE VM and Linux (WAVV) which is havingtheir next meeting [April 18-22, 2008] in Chattanooga, Tennessee. I presentedat this conference back in 1996 in Green Bay, Wisconsin, as part of the IBM Linux for S/390 team. It started onthe Sunday that Wisconsin switched their clocks for [DaylightSaving Time], and the few of us from Arizona or other places that don't both with this, all showed up forbreakfast an hour early.
When I was in Australia last year, I was told the wave that sports fans do, by raising their hands in coordinatedsequence, was called the [Mexican Wave]in most other countries. When I was there, Melbourne was trying to outlaw this practice at their cricket matches.
The "wave" represents a powerful metaphor, from z/VM operating system on System z mainframes to VMware and Xenon Intel-based processor machines, as the direction of virtualization that we are heading for future data centers.The Mexican wave represents a glimpse of what humans can accomplish with collaboration on a globalscale. It can also represent the tidal wave of data arising from nearly 60 percent annual growth instorage capacity. (I had to mention storage eventually, to avoid being completely off-topic on this post!)
I hope this is the graphic you were looking for Bob. If anyone else has wave-themed posters they would like to contribute, please post a comment below.
technorati tags: Bob Swann, IBM poster, z/VM, Japanese, Great Wave, Kanagawa, Katsushika Hokusai, Kuala Lumpur, Malaysia, Indian Ocean, Jakarta, Indonesia, WAVV, Mexican Wave, storage, capacity, growth, Linux,Melbourne, Australia, VMware, Xen
It's Tuesday, and that means more IBM announcements!
I haven't even finished blogging about all the other stuff that got announced last week, and here we are with more announcements. Since IBM's big [Pulse 2010 Conference] is next week, I thought I would cover this week's announcement on Tivoli Storage Manager (TSM) v6.2 release. Here are the highlights:
- Client-Side Data Deduplication
This is sometimes referred to as "source-side" deduplication, as storage admins can get confused on which servers are clients in a TSM client-server deployment. The idea is to identify duplicates at the TSM client node, before sending to the TSM server. This is done at the block level, so even files that are similar but not identical, such as slight variations from a master copy, can benefit. The dedupe process is based on a shared index across all clients, and the TSM server, so if you have a file that is similar to a file on a different node, the duplicate blocks that are identical in both would be deduplicated.
This feature is available for both backup and archive data, and can also be useful for archives using the IBM System Storage Archive Manager (SSAM) v6.2 interface.
- Simplified management of Server virtualization
TSM 6.2 improves its support of VMware guests by adding auto-discovery. Now, when you spontaneously create a new virtual machine OS guest image, you won't have to tell TSM, it will discover this automatically! TSM's legendary support of VMware Consolidated Backup (VCB) now eliminates the manual process of keeping track of guest images. TSM also added support of the Vstorage API for file level backup and recovery.
While IBM is the #1 reseller of VMware, we also support other forms of server virtualization. In this release, IBM adds support for Microsoft Hyper-V, including support using Microsoft's Volume Shadow Copy Services (VSS).
- Automated Client Deployment
Do you have clients at all different levels of TSM backup-archive client code deployed all over the place? TSM v6.2 can upgrade these clients up to the latest client level automatically, using push technology, from any client running v5.4 and above. This can be scheduled so that only certain clients are upgraded at a time.
- Simultaneous Background Tasks
The TSM server has many background administrative tasks:
- Migration of data from one storage pool to another, based on policies, such as moving backups and archives on a disk pool over to a tape pools to make room for new incoming data.
- Storage pool backup, typically data on a disk pool is copied to a tape pool to be kept off-site.
- Copy active data. In TSM terminology, if you have multiple backup versions, the most recent version is called the active version, and the older versions are called inactive. TSM can copy just the active versions to a separate, smaller disk pool.
In previous releases, these were done one at a time, so it could make for a long service window. With TSM v6.2, these three tasks are now run simultaneously, in parallel, so that they all get done in less time, greatly reducing the server maintenance window, and freeing up tape drives for incoming backup and archive data. Often, the same file on a disk pool is going to be processed by two or more of these scheduled tasks, so it makes sense to read it once and do all the copies and migrations at one time while the data is in buffer memory.
- Enhanced Security during Data Transmission
Previous releases of TSM offered secure in-flight transmission of data for Windows and AIX clients. This security uses Secure Socket Layer (SSL) with 256-bit AES encryption. With TSM v6.2, this feature is expanded to support Linux, HP-UX and Solaris.
- Improved support for Enterprise Resource Planning (ERP) applications
I remember back when we used to call these TDPs (Tivoli Data Protectors). TSM for ERP allows backup of ERP applications, seemlessly integrating with database-specific tools like IBM DB2, Oracle RMAN, and SAP BR*Tools. This allows one-to-many and many-to-one configurations between SAP servers and TSM servers. In other words, you can have one SAP server backup to several TSM servers, or several SAP servers backup to a single TSM server. This is done by splitting up data bases into "sub-database objects", and then process each object separately. This can be extremely helpful if you have databases over 1TB in size. In the event that backing up an object fails and has to be re-started, it does not impact the backup of the other objects.
technorati tags: , announcements, IBM, Pulse, conference, TSM, Tivoli, SSAM, backup, archive, VMware, VCB, Hyper-V, Microsoft, SSL, AES, encryption, in-flight, Linux, HP-UX, Solaris, ERP, DB2, Oracle, RMAN, SAP, BR*Tools, ibm-pulse, pulse2010
Last March, in my blog post [RSA Breach, World Backup Day and the use of Encryption], I mentioned the use of [EncryptStick], a product by ENC Security Systems. Since then, I have thought of some ways that could make it even better.
(FTC Disclosure: I do not work or have any financial investments in ENC Security Systems. ENC Security Systems did not paid me to mention them on this blog. Their mention in this blog is not an endorsement of either their company or any of their products. Information about EncryptStick was based solely on publicly available information and my own personal experiences. My friends at ENC Security Systems provided me a full-version pre-loaded stick for this review.)
The EncryptStick software comes in two flavors, a free/trial version, and the full/paid version. The free trial version has [limits on capacity and time] but provides enough glimpse of the product to decide before you buy the full version. You can download the software yourself and put in on your own USB device, or purchase the pre-loaded stick that comes with the full-version license.
Whichever you choose, the EncryptStick offers three nice protection features:
- Encryption for data organized in "storage vaults", which can be either on the stick itself, or on any other machine the stick is connected to. That is a nice feature, because you are not limited to the capacity of the USB stick.
- Encrypted password list for all your websites and programs.
- A secure browser, that prevents any key-logging or malware that might be on the host Windows machine.
I have tried out all three functions and everything works as advertised. However, there is always room for improvement, so here are my suggestions.
- Plausible Deniability
The first problem is that the pre-loaded stick looks like it is worth a million dollars. It is in a shiny bronze color with "EncryptStick" emblazoned on it. This is NOT subtle advertising! This 8GB capacity stick looks like it would be worth stealing solely on being a nice piece of jewelry, and then the added bonus that there might be "valuable secrets" just makes that possibility even more likely.
If you want to keep your information secure, it would help to have "plausible deniability" that there is nothing of value on a stick. Either have some corporate logo on it, of have the stick look like a cute animal, like these pig or chicken USB sticks.
It reminds me how the first Apple iPod's were in bright [Mug-me White]. I use black headphones with my black iPod to avoid this problem.
Of course, you can always install the downloadable version of EncryptStick software onto a less conspicuous stick if you are concerned about theft. The full/paid version of EncryptStick offers an option for "lost key recovery" which would allow you to backup the contents of the stick and be able to retrieve them on a newly purchased stick in the event your first one is lost or stolen.
- The Cap
Imagine how "unlucky" I felt when I notice that I had lost my "rabbits feet" on this cute animal-themed USB stick.
I sense trouble for losing the cap on my EncryptStick as well. This might seem trivial, but is a pet-peeve of mine that USB sticks should plan for this. Not only is there nothing to keep the cap on (it slides on and off quite smoothly), but there is no loop to attach the cap to anything if you wanted to.
Since then, I got smart and try to look for ways to keep the cap connected. Some designs, like this IBM-logoed stick shown above, just rotate around an axle, giving you access when you need it, and protection when it is folded closed.
Alternatively, get a little chain that allows you to attach the cap to the main stick. In the case of the pig and chicken, the memory section had a hole pre-drilled and a chain to put through it. I drilled an extra hole in the cap section of each USB stick, and connected the chain through both pieces.
(Warning: Kids, be sure to ask for assistance from your parents before using any power tools on small plastic objects.)
- Multi-OS Support
The EncryptStick can run on either Microsoft Windows or Mac OS. The instructions indicate that you can install both versions of download software onto a single stick, so why not do that for the pre-loaded full version? The stick I have had only the Windows version pre-loaded. I don't know if the Windows and Mac OS versions can unlock the same "storage vaults" on the stick.
Certainly, I have been to many companies where either everyone runs Windows or everyone runs Mac OS. If the primary target audience is to use this stick at work in one of those places, then no changes are required. However, at IBM, we have employees using Windows, Mac OS and Linux. In my case, I have all three! Ideally, I would like a version of EncryptStick that I could take on trips with me that would allow me to use it regardless of the Operating System I encountered.
Since there isn't a Linux-version of EncryptStick software, I decided to modify my stick to support booting Linux. I am finding more and more Linux kiosks when I travel, especially at airports and high-traffic locations, so having a stick that works both in Windows or Linux would be useful. Here are some suggestions if you want to try this at home:
- Use fdisk to change the FAT32 partition type from "b" to "c". Apparently, Grub2 requires type "c", but the pre-loaded EncryptStick was set to "b". The Windows version of EncryptStick> seems to work fine in either mode, so this is a harmless change.
- Install Grub2 with "grub-install" from a working Linux system.
- Once Grub2 is installed, you can boot ISO images of various Linux Rescue CDs, like [PartedMagic] which includes the open-source [TrueCrypt] encryption software that you could use for Linux purposes.
- This USB stick could also be used to help repair a damaged or compromised Windows system. Consider installing [Ophcrack] or [Avira].
- Certainly, 8GB is big enough to run a full Linux distribution. The latest 32-bit version of [Ubuntu] could run on any 32-bit or 64-bit Intel or AMD x86 machine, and have enough room to store an [encrypted home directory].
- If you plan to use Firefox's [Private Browsing Mode], I highly recommend using the [NoScript] Firefox plug-in.
Since the stick is formatted FAT32, you should be able to run your original Windows or Mac OS version of EncryptStick with these changes.
Depending on where you are, you may not have the luxury to reboot a system from the USB memory stick. Certainly, this may require changes to the boot sequence in the BIOS and/or hitting the right keys at the right time during the boot sequence. I have been to some "Internet Cafes" that frown on this, or have blocked this altogether, forcing you to boot only from the hard drive.
Well, those are my suggestions. Whether you go on a trip with or without your laptop, it can't hurt to take this EncryptStick along. If you get a virus on your laptop, or have your laptop stolen, then it could be handy to have around. If you don't bring your laptop, you can use this at Internet cafes, hotel business centers, libraries, or other places where public computers are available.
technorati tags: IBM, ENC Security Systems, EncryptStick, encryption, USB, WIndows, MacOS, Linux
Well, it's Wednesday, and you know what that means... IBM Announcements!
(Actually most IBM announcements are on Tuesdays, but IBM gave me extra time to recover from my trip to Europe!)
Today, IBM announced [IBM PureSystems], a new family of expert-integrated systems that combine storage, servers, networking, and software, based on IBM's decades of experience in the IT industry. You can register for the [Launch Event] today (April 11) at 2pm EDT, and download the companion "Integrated Expertise" event app for Apple, Android or Blackberry smartphones.
(If you are thinking, "Hey, wait a minute, hasn't this been done before?" you are not alone. Yes, IBM introduced the System/360 back in 1964, and the AS/400 back in 1988, so today's announcement is on scheduled for this 24-year cycle. Based on IBM's past success in this area, others have followed, most recently, Oracle, HP and Cisco.)
Initially, there are two offerings:
- IBM PureFlex™ System
IBM PureFlex is like IaaS-in-a-box, allowing you to manage the system as a pool of virtual resources. It can be used for private cloud deployments, hybrid cloud deployments, or by service providers to offer public cloud solutions. IBM drinks its own champagne, and will have no problem integrating these into its [IBM SmartCloud] offerings.
To simplify ordering, the IBM PureFlex comes in three tee-shirt sizes: Express, Standard and Enterprise.
IBM PureFlex is based on a 10U-high, 19-inch wide, standard rack-mountable chassis that holds 14 bays, organized in a 7 by 2 matrix. Unlike BladeCenter where blades are inserted vertically, the IBM PureFlex nodes are horizontal. Some of the nodes take up a single bay (half-wide), but a few are full-wide, take up two bays, the full 19-inch width of the chassis. Compute and storage snap in the front, while power supplies, fans, and networking snap in the back. You can fit up to four chassis in a standard 42U rack.
Unlike competitive offerings, IBM does not limit you to x86 architectures. Both x86 and POWER-based compute nodes can be mixed into a single chassis. Out of the box, the IBM PureFlex supports four operating systems (AIX, IBM i, Linux and Windows), four server hypervisors (Hyper-V, Linux KVM, PowerVM, and VMware), and two storage hypervisors (SAN Volume Controller and Storwize V7000).
There are a variety of storage options for this. IBM will offer SSD and HDD inside the compute nodes themselves, direct-attached storage nodes, and an integrated version of the Storwize V7000 disk system. Of course, every IBM System Storage product is supported as external storage. Since Storwize V7000 and SAN Volume Controller support external virtualization, many non-IBM devices will be supported automatically as well.
Networking is also optimized, with options for 10Gb and 40Gb Ethernet/FCoE, 40Gb and 56Gb Infiniband, 8Gbps and 16Gbps Fibre Channel. Much of the networking traffic can be handled within the chassis, to minimize traffic on external switches and directors.
For management, IBM offers the Flex System Manager, that allows you to manage all the resources from a single pane of glass. The goal is to greatly simplify the IT lifecycle experience of procurement, installation, deployment and maintenance.
- IBM PureApplication™ System
IBM PureApplication is like PaaS-in-a-box. Based on the IBM PureFlex infrastructure, the IBM PureApplication adds additional software layers focused on transactional web, business logic, and database workloads. Initially, it will offer two platforms: Linux platform based on x86 processors, Linux KVM and Red Hat Enterprise Linux (RHEL); and a UNIX platform based on POWER7 processors, PowerVM and AIX operating system. It will be offered in four tee-shirt sizes (small, medium, large and extra large).
In addition to having IBM's middleware like DB2 and WebSphere optimized for this platform, over 600 companies will announce this week that they will support and participate in the IBM PureSystems ecosystem as well. Already, there are 150 "Patterns of Expertise" ready to deploy from IBM PureSystem Centre, a kind of a "data center app store", borrowing an idea used today with smartphones.
By packaging applications in this manner, workloads can easily shift between private, hybrid and public clouds.
If you are unhappy with the inflexibility of your VCE Vblock, HP Integrity, or Oracle ExaLogic, talk to your local IBM Business Partner or Sales Representative. We might be able to buy your boat anchor off your hands, as part of an IBM PureSystems sale, with an attractive IBM Global Financing plan.
To learn more, check out the [IBM PureSystems] landing page, follow the twitter handle [@IBMPureSystems] or hashtag #ExpertIntSys, watch the videos on the [YouTube channel], or read the [Expert Integrated Systems] blog.
technorati tags: IBM, PureSystems, PureFlex, PureApplication, Flex System Manager, Storwize V7000, Storage Hypervisor, SVC, Pattern of Expertise, DB2, WebSphere, VMware, KVM, Hyper-V, PowerVM, AIX, IBM i, Linux, Windows, HP, Integrity, Oracle, Exalogic, Cisco, UCS, VCE, Vblock