After my response to Jon Toigo on Drunken Data
withmy post [Elevenanswers about Deduplication
], Jon follows up with a request to validate the numbersquoted in the February 26 Press Release[IBM launches New “System z10” Mainframe
], particularly the estimate that a single mainframecan handle to the workload of 1500 x86 servers, in his post[A Bit More Blegging
]. The timing is perfect in that IBM launched[the next wave of Project Big Green
] today.To avoid sounding like an [editorial from the New York Sun
],I checked the facts, and spoke to the person in IBM who did all the calculations. Jon, as always, you have my permissionto publish this on your site if you want.
( I cannot take credit for coining the new term "bleg". I saw this term firstused over on the [FreakonomicsBlog]. If you have not yet read the book "Freakonomics", I highly recommend it! The authors' blog is excellent as well.)
For this comparison, it is important to figure out how much workload a mainframe can support, how much an x86 cansupport, and then divide one from the other. Sounds simple enough, right? And what workload should you choose?IBM chose a business-oriented "data-intensive" workload using Oracle database. (If you wanted instead a scientific"compute-intensive" workload, consider an [IBM supercomputer] instead, the most recent of which clocked in over 1 quadrillion floating point operations per second, or PetaFLOP.) IBM compares the following two systems:
- Sun Fire X2100 M2, model 1220 server (2-way)
IBM did not pick a wimpy machine to compare against. The model 1220 is the fastest in the series, with a 2.8Ghz x86-64 dual-core AMD Opteron processor, capable of running various levels of Solaris, Linux or Windows.In our case, we will use Oracle workloads running on Red Hat Enterprise Linux.All of the technical specifications are available at the[Sun Microsystems Sun Fire X1200] Web site.I am sure that there are comparable models from HP, Dell or even IBM that could have been used for this comparison.
- IBM z10 Enterprise Class mainframe model E64 (64-way)
This machine can run a variety of operating systems also, including Red Hat Enterprise Linux (RHEL). The E64 has four "multiple processor modules" called"processor books" for a total of 77 processing units: 64 central processors, 11 system assist processors (SAP) and 2 spares. That's right, spare processors, in case any others gobad, IBM has got your back. You can designate a central processor in a variety of flavors. For running z/VM and Linux operating systems, the central processors can be put into "Integrated Facility for Linux" (IFL) mode.On IT Jungle, Timothy Patrick Morgan explains the z10 EC in his article[IBM Launches 64-Way z10 Enterprise Class Mainframe Behemoth]. For more information on the z10 EC, see the 110-page [Technical Introduction], orread the specifications on the[IBM z10 EC] Web site.
Moving Oracle workloads from x86 over to mainframe is quite commonsince [IBM and Cisco joined forces to meet Linux On Mainframe demand]. For more information on consolidating x86 servers running Oracle over to a mainframe, read the [Quick Reference], IBMRedbook titled ["Using Oracle Solutionson Linux for System z"], or this [presentation by Jim Elliott, IBM System z Specialist].
In a shop full of x86 servers, there are production servers, test and development servers, quality assuranceservers, standby idle servers for high availability, and so on. On average, these are only 10 percent utilized.For example, consider the following mix of servers:
- 125 Production machines running 70 percent busy
- 125 Backup machines running idle ready for active failover in case a production machine fails
- 1250 machines for test, development and quality assurance, running at 5 percent average utilization
While [some might question, dispute or challenge thisten percent] estimate, it matches the logic used to justify VMware, XEN, Virtual Iron or other virtualization technologies. Running 10 to 20 "virtual servers" on a single physical x86 machine assumes a similar 5-10 percent utilization rate.
Note: The following paragraphs have been revised per comments received.
|Now the math. Jon, I want to make it clear I was not involved in writing the press release nor assisted with thesemath calculations. Please, don't shoot the messenger! Remember this cartoon where two scientists in white lab coats are writing mathcalculations on a chalkboard, and in the middle there is "and then a miracle happens..." to continue the rest ofthe calculations?|
In this case, the miracle is the number that compares one server hardware platform to another. I am not going to bore people with details like the number of concurrent processor threads or the differencesbetween L1 and L3 cache. IBM used sophisticated tools and third party involvement that I am not allowed to talk about, and I have discussed this post with lawyers representing
four (now five) different organizations already,so for the purposes of illustration and explanation only, I have reverse-engineered a new z10-to-Opteron conversion factor as 6.866 z10 EC MIPS per GHz of dual-core AMD Opteron for I/O-intensive workloads running only 10 percent average CPU utilization. Business applications that perform a lot of I/O don't use their CPU as much as other workloads.For compute-intensive or memory-intensive workloads, the conversion factor may be quite different, like 200 MIPS per GHz, as Jeff Savit from Sun Microsystems points out in the comments below.
Keep in mind that each processor is different, and we now have Intel, AMD, SPARC, PA-RISC and POWER (and others); 32-bit versus 64-bit; dual-core and quad-core; and different co-processor chip sets to worry about. AMD Opteron processors come in different speeds, but we are comparing against the 2.8GHz, so 1500 times 6.866 times 2.8 is 28,337. Since these would be running as Linux guestsunder z/VM, we add an additional 7 percent overhead or 2,019 MIPS. We then subtract 15 percent for "smoothing", whichis what happens when you consolidate workloads that have different peaks and valleys in workload, or 4,326 MIPS.The end is that we need a machine to do 26,530 MIPS. Thanks to advances in "Hypervisor" technological synergy between the z/VM operating system and the underlying z10 EC hardware, the mainframe can easily run 90 percent utilized when aggregating multiple workloads, so a 29,477 MIPS machine running at 90 percent utilization can handle these 26,530 MIPS.
N-way machines, from a little 2-way Sun Fire X2100 to the might 64-way z10 EC mainframe, are called "Symmetric Multiprocessors". All of the processors or cores are in play, but sometimes they have to taketurns, wait for exclusive access on a shared resource, such as cache or the bus. When your car is stopped at a red light, you are waiting for your turn to use the shared "intersection". As a result, you don't get linear improvement, but rather you get diminishing returns. This is known generically as the "SMP effect", and in IBM documentsthis as [Large System Performance Reference].While a 1-way z10 EC can handle 920 MIPS, the 64-way can only handle30,657 MIPS. The 29,477 MIPS needed for the Sun x2100 workload can be handled by a 61-way, giving you three extraprocessors to handle unexpected peaks in workload.
But are 1500 Linux guest images architecturally possible? A long time ago, David Boyes of[Sine Nomine Associates] ran 41,400 Linux guest images on a single mainframe using his [Test Plan Charlie], and IBM internallywas able to get 98,000 images, and in both cases these were on machines less powerful than the z10 EC. Neitherof these were tests ran I/O intensive workloads, but extreme limits are always worth testing. The 1500-to-1 reduction in IBM's press release is edge-of-the-envelope as well, so in production environments, several hundred guest images are probably more realistic, and still offer significant TCO savings.
The z10 EC can handle up to 60 LPARs, and each LPAR can run z/VM which acts much like VMware in allowing multipleLinux guests per z/VM instance. For 1500 Linux guests, you could have 25 guests each on 60 z/VM LPARs, or 250 guests on each of six z/VM LPARs, or 750 guests on two LPARs. with z/VM 5.3, each LPAR can support up to 256GB of memory and 32 processors, so you need at least two LPAR to use all 64 engines. Also, there are good reasons to have different guests under different z/VM LPARs, such as separating development/test from production workloads. If you had to re-IPLa specific z/VM LPAR, it could be done without impacting the workloads on other LPARs.
To access storage, IBM offers N-port ID Virtualization (NPIV). Without NPIV, two Linux guest images could not accessthe same LUN through the same FCP port because this would confuse the Host Bus Adapter (HBA), which IBM calls "FICON Express" cards. For example, Linux guest 1 asks to read LUN 587 block 32 and this is sent out a specific port, to a switch, to a disk system. Meanwhile, Linux guest 2 asks to read LUN 587 block 49. The data comes back to the z10 EC with the data, gives it to the correct z/VM LPAR, but then what? How does z/VM know which of the many Linux guests to give the data to? Both touched the same LUN, so it is unclear which made the request. To solve this, NPIV assigns a virtual "World Wide Port Name" (WWPN), up to 256 of them per physical port, so you can have up to 256 Linux guests sharing the same physical HBA port to access the same LUN.If you had 250 guests on each of six z/VM LPARs, and each LPAR had its own set of HBA ports, then all 1500 guestscould access the same LUN.
Yes, the z10 EC machines support Sysplex. The concept is confusing, but "Sysplex" in IBM terminology just means that you can have LPARs either on the same machine or on separate mainframes, all sharing the same time source, whether this be a "Sysplex Timer" or by using the "Server Time Protocol" (STP). The z10 EC can have STP over 6 Gbps Infiniband over distance. If you wantedto have all 1500 Linux guests time stamp data identically, all six z/VM LPARs need access to the shared time source. This can help in a re-do or roll-back situation for Oracle databases to complete or back-out "Units of Work" transactions. This time stamp is also used to form consistency groups in "z/OS Global Mirror", formerly called "XRC" for Extended Remote Distance Copy. Currently, the "timestamp" on I/O applies only to z/OS and Linux and not other operating systems. (The time stamp is done through the CDK driver on Linux, and contributed back to theopen source community so that it is available from both Novell SUSE and Red Hat distributions.)To have XRC have consistency between z/OS and Linux, the Linux guests would need to access native CKD volumes,rather than VM Minidisks or FCP-oriented LUNs.
Note: this is different than "Parallel Sysplex" which refers to having up to 32 z/OS images sharing a common "Coupling Facility" which acts as shared memory for applications. z/VM and Linux do not participate in"Parallel Sysplex".
As for the price, mainframes list for as little as "six figures" to as much as several million dollars, but I have no idea how much this particular model would cost. And, of course, this is just the hardware cost. I could not find the math for the $667 per server replacement you mentioned, so don't have details on that.You would need to purchase z/VM licenses, and possibly support contracts for Linux on System z to be fully comparable to all of the software license and support costs of the VMware, Solaris, Linux and/or Windows licenses you run on the x86 machines.
This is where a lot of the savings come from, as a lot of software is licensed "per processor" or "per core", and so software on 64 mainframe processors can be substantially less expensive than 1500 processors or 3000 cores.IBM does "eat its own cooking" in this case. IBM is consolidating 3900 one-application-each rack-mounted serversonto 30 mainframes, for a ratio of 130-to-1 and getting amazingly reduced TCO. The savings are in the followingareas:
- Hardware infrastructure. It's not just servers, but racks, PDUs, etc. It turns out to be less expensive to incrementally add more CPU and storage to an existing mainframe than to add or replace older rack-em-and-stack-emwith newer models of the same.
- Cables. Virtual servers can talk to each other in the same machine virtually, such as HiperSockets, eliminatingmany cables. NPIV allows many guests to share expensive cables to external devices.
- Networking ports. Both LAN and SAN networking gear can be greatly reduced because fewer ports are needed.
- Administration. We have Universities that can offer a guest image for every student without having a majorimpact to the sys-admins, as the students can do much of their administration remotely, without having physicalaccess to the machinery. Companies uses mainframe to host hundreds of virtual guests find reductions too!
- Connectivity. Consolidating distributed servers in many locations to a mainframe in one location allows youto reduce connections to the outside world. Instead of sixteen OC3 lines for sixteen different data centers, you could have one big OC48 line instead to a single data center.
- Software licenses. Licenses based on servers, cores or CPUs are reduced when you consolidate to the mainframe.
- Floorspace. Generally, floorspace is not in short supply in the USA, but in other areas it can be an issue.
- Power and Cooling. IBM has experienced significant reduction in power consumption and cooling requirementsin its own consolidation efforts.
All of the components of DFSMS (including DFP, DFHSM, DFDSS and DFRMM) were merged into a single product "DFSMS for z/OS" and is now an included element in the base z/OS operating system. As a result of these, customers typically have 80 to 90 percent utilization on their mainframe disk. For the 1500 Linux guests, however, most of the DFSMS features of z/OS do not apply. These functions were not "ported over" to z/VM nor Linux on any platform.
Note: DFSMS can backup or dump Linux on System z partitions or volumes. See this [Appendix C. HOWTO backup Linux data through z/OS] for details.
Instead, the DFSMS concepts have been re-implemented into a new product called "Scale-Out File Services" (SOFS) which would provide NAS interfaces to a blendeddisk-and-tape environment. The SOFS disk can be kept at 90 percent utilization because policies can place data, movedata and even expire files, just like DFSMS does for z/OS data sets. SOFS supports standard NAS protocols such as CIFS,NFS, FTP and HTTP, and these could be access from the 1500 Linux guests over an Ethernet Network Interface Card (NIC), which IBM calls "OSA Express" cards.
Lastly, IBM z10 EC is not emulating x86 or x86-64 interfaces for any of these workloads. No doubt IBM and AMD could collaborate together to come up with an AMD Opteron emulator for the S/390 chipset, and load Windows 2003 right on top of it, but that would just result in all kinds of emulation overhead.Instead, Linux on System z guests can run comparable workloads. There are many Linux applications that are functionally equivalent or the same as their Windows counterparts. If you run Oracle on Windows, you could runOracle on Linux. If you run MS Exchange on Windows, you could run Bynari on Linux and let all of your Outlook Expressusers not even know their Exchange server had been moved! Linux guest images can be application servers, web servers, database servers, network infrastructure servers, file servers, firewall, DNS, and so on. For nearly any business workload you can assign to an x86 server in a datacenter, there is likely an option for Linux on System z.
Hope this answers all of your questions, Jon. These were estimates based on basic assumptions. This is not to imply that IBM z10 EC and VMware are the only technologies that help in this area, you can certainly find virtualization on other systems and through other software.I have asked IBM to make public the "TCO framework" that sheds more light on this.As they say, "Your mileage may vary."
For more on this series, check out the following posts:
If in your travels, Jon, you run into someone interested to see how IBM could help consolidate rack-mounted servers over to a z10 EC mainframe, have them ask IBM for a "Scorpion study". That is the name of the assessment that evaluates a specific clientsituation, and can then recommend a more accurate estimate configuration.
technorati tags: Jon Toigo, DrunkenData, bleg, IBM, z10, EC, E64, mainframe, x86, AMD, Opteron, Sun, Fire, X2100, petaFLOP, Freakonomics, Red Hat, RHEL, IFL, VMware, Jim Elliott, Xen, Virtual Iron, Solaris, Linux, Windows, Project Big Green, Infiniband, STP, Sysplex, Scorpion study, MS Exchange, Bynari, Oracle
It's official! My "blook" Inside System Storage - Volume I
is now available.
|This blog-based book, or “blook”, comprises the first twelve months of posts from this Inside System Storage blog,165 posts in all, from September 1, 2006 to August 31, 2007. Foreword by Jennifer Jones. 404 pages.|
- IT storage and storage networking concepts
- IBM strategy, hardware, software and services
- Disk systems, Tape systems, and storage networking
- Storage and infrastructure management software
- Second Life, Facebook, and other Web 2.0 platforms
- IBM’s many alliances, partners and competitors
- How IT storage impacts society and industry
You can choose between hardcover (with dust jacket) or paperback versions:
This is not the first time I've been published. I have authored articles for storage industry magazines, written large sections of IBM publications and manuals, submitted presentations and whitepapers to conference proceedings, and even had a short story published with illustrations by the famous cartoon writer[Ted Rall].
But I can say this is my first blook, and as far as I can tell, the first blook from IBM's many bloggers on DeveloperWorks, and the first blook about the IT storage industry.I got the idea when I saw [Lulu Publishing] run a "blook" contest. The Lulu Blooker Prize is the world's first literary prize devoted to "blooks"--books based on blogs or other websites, including webcomics. The [Lulu Blooker Blog] lists past year winners. Lulu is one of the new innovative "print-on-demand" publishers. Rather than printing hundredsor thousands of books in advance, as other publishers require, Lulu doesn't print them until you order them.
I considered cute titles like A Year of Living Dangerously, orAn Engineer in Marketing La-La land, or Around the World in 165 Posts, but settled on a title that matched closely the name of the blog.
In addition to my blog posts, I provide additional insights and behind-the-scenes commentary. If you go to the Luluwebsite above, you can preview an entire chapter in its entirety before purchase. I have added a hefty 56-page Glossary of Acronyms and Terms (GOAT) with over 900 storage-related terms defined, which also doubles as an index back to the post (or posts) that use or further explain each term.
So who might be interested in this blook?
- Business Partners and Sales Reps looking to give a nice gift to their best clients and colleagues
- Managers looking to reward early-tenure employees and retain the best talent
- IT specialists and technicians wanting a marketing perspective of the storage industry
- Mentors interested in providing motivation and encouragement to their proteges
- Educators looking to provide books for their classroom or library collection
- Authors looking to write a blook themselves, to see how to format and structure a finished product
- Marketing personnel that want to better understand Web 2.0, Second Life and social networking
- Analysts and journalists looking to understand how storage impacts the IT industry, and society overall
- College graduates and others interested in a career as a storage administrator
And yes, according to Lulu, if you order soon, you can have it by December 25.
technorati tags: IBM, blook, Volume I, Jennifer Jones, system, storage, strategy, hardware, software, services, disk, tape, networking, SAN, secondlife, Web2.0, facebook, Lulu, publishing, Blooker Prize, articles, magazines, proceedings, Ted Rall, insights, glossary, early-tenure, mentors, library, classroom, administrator, print, publish, on demand
A reader of my blog asked me what seemed like a simple enough question:
Whatever happened to Lotus Approach? I loved that personal db. (thoughit's been awhile...)
Of course, researching an answer, I encountered some interesting new information. Interestingly, everyone tries to "read between the lines" and tries to determine what solution is best.
From a colleague from Lotus:
You can still get [Lotus Approach] as part of Smartsuite.
However, I have to assume his real question is ... "what is the quick and easy way for me to build a lightweight database app like Microsoft Access that I can distribute as a standalone executable?"
To which I would say "Lotus has a program called Approach, which is part of Lotus SmartSuite, which some people still use. However, a lot of the focus in IBM now centers around the lightweight Cloudscape database which IBM acquired from Informix, which is now known as the [open source project called Derby]. Many IBM and Lotus products, such as Lotus Expeditor use the JDBC connection to Derby, which allows you to use Windows, Linux, Flash, etc. ... with no vendor lock in".
I am familiar with Cloudscape, and I evaluated it as a potential database for IBM TotalStorage Productivity Center, when I was the lead architect defining the version 1 release. It runs entirely on Java, which is both a plus and minus. Plus in that it runs anywhere Java runs, but a minus in that it is not optimized for high performance or large scalability. Because of this, we decided instead on using the full commercial DB2 database instead for Productivity Center.
Not to be undone, my colleagues over at DB2 offered a different alternative, [DB2 Express-C], which runs on a variety of Windows, Linux-x86, and Linux on POWER platforms. It is "free" as in beer, not free as in speech, which means you can download and use it today at no charge, and even ship products with it included, but you are not allowed to modify and distribute altered versions of it, as you can with "free as in speech" open source code, as in the case of Derby above (see [Apache License 2.0"] for details).
(If you have no idea what I am talking about in my distinction between "free speech" and "free beer", see Simon Phipps' article[Perspective: Free speech, free beer and free software] orthe definition from the [Free Software Foundation].)
As I see it, DB2 Express-C has two key advantages. First, if you like the free version, you can purchase a "support contract" for those that need extra hand-holding, or are using this as part of a commercial business venture. Second,for those who do prefer vendor lock-in, it is easyto upgrade Express-C to the full IBM DB2 database product, so if you are developing a product intended for use with DB2, you can develop it first with DB2 Express-C, and migrate up to full DB2 commercial version when you are ready.
This is perhaps more information than you probably expected for such a simple question. Meanwhile, I am stilltrying to figure out MySQL as part of my [OLPC volunteer project].
technorati tags: IBM, Lotus, Approach, SmartSuite, TotalStorage, Productivity Center, Cloudscape, Apache, Derby, free, speech, beer, DB2, Express-C, Windows, Linux, POWER, open source
I am still wiping the coffee off my computer screen, inadvertently sprayed when I took a sip while reading HDS' uber-blogger Hu Yoshida's post on storage virtualization andvendor lock-in
. This blog appears to be the text version of theirfunny video
While most of the post is accurate and well-stated, two opinions particular caught my eye. I'll be nice and call them opinions, since these are blogs, and always subject to interpretation. I'll put quotes around them so that people will correctly relate these to Hu, and not me.
"Storage virtualization can only be done in a storage controller. Currently Hitachi is the only vendor to provide this."
-- Hu Yoshida
Hu, I enjoy all of your blog entries, but you should know better. HDS is fairly new-comer to the storage virtualization arena, so since IBM has been doing this for decades, I will bring you and the rest of the readers up to speed. I am not starting a blog-fight, just want to provide some additional information for clients to consider when making choices in the marketplace.
First, let's clarify the terminology. I will use 'storage' in the broad sense, including anything that can hold 1's and 0's, including memory, spinning disk media, and plastic tape media. These all have different mechanisms and access methods, based on their physical geometry and characteristics. The concept of 'virtualization' is any technology that makes one set of resources look like another set of resources with more preferable characteristics, and this applies to storage as well as servers and networks. Finally, 'storage controller' is any device with the intelligence to talk to a server and handle its read and write requests.
Second, let's take a look at all the different flavors of storage virtualization that IBM has developed over the past 30 years.
IBM introduces the S/370 with the OS/VS1 operating system. "VS" here refers to virtual storage, and in this case internal server memory was swapped out to physical disk. Using a table mapping, disk was made to look like an extension of main memory.
IBM introduces the IBM 3850 Mass Storage System (MSS). Until this time, programs that ran on mainframes had to be acutely aware of the device types being written, as each device type had different block, track and cylinder sizes, so a program written for one device type would have to be modified to work with a different device type. The MSS was able to take four 3350 disks, and a lot of tapes, and make them look like older 3330 disks, since most programs were still written for the 3330 format. The MSS was a way to deliver new 3350 disk to a 3330-oriented ecosystem, and greatly reduce the cost by handling tape on the back end. The table mapping was one virtual 3330 disk (100 MB) to two physical tapes (50 MB each). Back then, all of the mainframe disk systems had separate controllers. The 3850 used a 3831 controller that talked to the servers.
IBM invents Redundant Array of Independent Disk (RAID) technology. The table mapping is one or more virtual "Logical Units" (or "LUNs") to two or more physical disks. Data is striped, mirrored and paritied across the physical drives, making the LUNs look and feel like disks, but with faster performance and higher reliability than the physical drives they were mapped to. RAID could be implemented in the server as software, on top or embedded into the operating system, in the host bus adapter, or on the controller itself. The vendor that provided the RAID software or HBA did not have to be the same as the vendor that provided the disk, so in a sense, this avoided "vendor lock-in".Today, RAID is almost always done in the external storage controller.
IBM introduces the Personal Computer. One of the features of DOS is the ability to make a "RAM drive". This is technology that runs in the operating system to make internal memory look and feel like an external drive letter. Applications that already knew how to read and write to drive letters could work unmodified with these new RAM drives. This had the advantage that the files would be erased when the system was turned off, so it was perfect for temporary files. Of course, other operating systems today have this feature, UNIX has a /tmp directory in memory, and z/OS uses VIO storage pools.
This is important, as memory would be made to look like disk externally, as "cache", in the 1990s.
IBM AIX v3 introduces Logical Volume Manager (LVM). LVM maps the LUNs from external RAID controllers into virtual disks inside the UNIX server. The mapping can combine the capacity of multiple physical LUNs into a large internal volume. This was all done by software within the server, completely independent of the storage vendor, so again no lock-in.
IBM introduces the Virtual Tape Server (VTS). This was a disk array that emulated a tape library. A mapping of virtual tapes to physical tapes was done to allow full utilization of larger and larger tape cartridges. While many people today mistakenly equate "storage virtualization" with "disk virtualization", in reality it can be implemented on other forms of storage. The disk array was referred to as the "Tape Volume Cache". By using disk, the VTS could mount an empty "scratch" tape instantaneously, since no physical tape had to be mounted for this purpose.
Contradicting its "tape is dead" mantra, EMC later developed its CLARiiON disk library that emulates a virtual tape library (VTL).
IBM introduces the SAN Volume Controller. It involves mapping virtual disks to manage disks that could be from different frames from different vendors. Like other controllers, the SVC has multiple processors and cache memory, with the intelligence to talk to servers, and is similar in functionality to the controller components you might find inside monolithic "controller+disk" configurations like the IBM DS8300, EMC Symmetrix, or HDS TagmaStore USP. SVC can map the virtual disk to physical disk one-for-one in "image mode", as HDS does, or can also map virtual disks across physical managed disks, using a similar mapping table, to provide advantages like performance improvement through striping. You can take any virtual disk out of the SVC system simply by migrating it back to "image mode" and disconnecting the LUN from management. Again, no vendor lock-in.
The HDS USP and NSC can run as regular disk systems without virtualization, or the virtualization can be enabled to allow external disks from other vendors. HDS usually counts all USP and NSC sold, but never mention what percentage these have external disks attached in virtualization mode. Either they don't track this, or too embarrassed to publish the number. (My guess: single digit percentage).
Few people remember that IBM also introduced virtualization in both controller+disk and SAN switch form factors. The controller+disk version was called "SAN Integration Server", but people didn't like the "vendor lock-in" having to buy the internal disk from IBM. They preferred having it all external disk, with plenty of vendor choices. This is perhaps why Hitachi now offers a disk-less version of the NSC 55, in an attempt to be more like IBM's SVC.
IBM also had introduced the IBM SVC for Cisco 9000 blade. Our clients didn't want to upgrade their SAN switch networking gear just to get the benefits of disk virtualization. Perhaps this is the same reason EMC has done so poorly with its "Invista" offering.
So, bottom line, storage virtualization can, and has, been delivered in the operating system software, in the server's host bus adapter, inside SAN switches, and in storage controllers. It can be delivered anywhere in the path between application and physical media. Today, the two major vendors that provide disk virtualization "in the storage controller" are IBM and HDS, and the three major vendors that provide tape virtualization "in the storage controller" are IBM, Sun/STK, and EMC. All of these involve a mapping of logical to physical resources. Hitachi uses a one-for-one mapping, whereas IBM additionally offers more sophisticated mappings as well.
technorati tags: IBM, disk, tape, storage, virtualization, Hu Yoshia, HDS, Hitachi, TagmaStore, USP, NSC, disk-less, SAN Volume Controller, LVM, AIX, RAID, SAN, blade, Sun, STK, Cisco, EMC, Invista,
Last week, in my posting on Toshiba's latest 1.8" drive
, Robert Pearson asks:
You may not be the right person to ask but I am asking everyone so "How do you see hybrid disk drives?"
(For the record, I am not immediately related to Robert. At onepoint, "Pearson" was the 12th most common surname in the USA, but now doesn't even make the Top 100.)
Robert, I would like to encourage you and everyone else to ask questions, don't worry if I am the wrong person to ask, asprobably I know the right person within IBM. Some people have called me the "Kevin Bacon" of Storage,as I am often less than six degrees away from the right person, having worked in IBM Storage for over 20 years.
For those not familiar with hybrid drives, there is a good write-up in Wikipedia.
Unfortunately, most of the people I would consult on this question, such as those from Market Intelligence or Research, are on vacation for the holidays, so, Robert, I will have to rely on my trusted 78-card Tarot deck and answer you with a five-card throw.
- Your first card, Robert, is the Hermit. This card represents "introspection". The best I/O is no I/O, which means that if applications can keep the information they need inside server memory, you can avoid the bus bandwidth limitations to going to external storage devices. Where external storage makes sense is when data is shared between servers, or when the single server is limited to a set amount of internal memory. So, consider maxing out the memory in your server first (IBM would be glad to sell you more internal memory!!!), then consider outside solid-state or hybrid devices. Windows for example has an architectural limit of 4GB.
- Your second card, Robert, is the Four of Cups, representing "apathy".On the card, you see three cups together, with the fourth cup being delivered from a cloud. This reminds me thatwe have three storage tiers already (memory,disk,tape), and introducing a fourth tier into the mix may not garnermuch excitement. For the mainframe, IBM introduced a Solid-State Device, call the Coupling Facility, which can be accessed from multipleSystem z servers. It is used heavily by DFSMS and DB2 to hold shared information. However, given some customer's apathytowards Information Lifecycle Management which includes "tiered storage", introducing yet another tier that forcespeople to decide what data goes where may be another challenge.
- Your third card, Robert, is the Chariot, which represents "Speed, Determination,and Will". In some cases, solid state disk are faster for reading, but can be slower for writing. In the case of ahybrid drive, where the memory acts as a front-end cache, read-hits would be faster, but read-misses might be slower.While the idea of stopping the drives during inactivity will reduce power consumption, spinning up and slowing downthe disk may incur additional performance penalties. At the time of this post, the fastest disk system remains the IBM SAN Volume Controller, based on SPC-1 and SPC-2 benchmarks in excess of those published for other devices.
- Your fourth card, Robert, is the Eight of Pentacles, which represents"Diligence, Hard work". The pentacles are coins with five-sided stars on them, and this often represents money.Our research team has projected that spinning disk will continue to be a viable and profitable storage media for at least anothereight years.
- Your fifth and last card, Robert, is the World, which normallyrepresents "Accomplishment", but since it is turned upside down, the meaning is reversed to "Limitation". Some Hybriddisks, and some types of solid state memory in general, do have limitations in the number of write cycles they can handle. For thoseunhappy with the frequency and slowness for rebuilds on SATA disk may find similar problems with hybrid drives.For that reason, businesses may not trust using hybrid drives for their busiest, mission-critical applications, but certainlymight use it for archive data with lower write-cycle requirements.
The tarot cards are never wrong, but certainly interpretations of the cards can be.
technorati tags: Robert Pearson, Kevin Bacon, IBM, storage, Tarot, card, deck, Hermit, Four-of-Cups, Coupling Facility, Chariot, SAN Volume Controller, SVC, SPC-1, SPC-2, benchmarks, Texas Memory Systems, Eight-of-Pentacles, World, Hybrid, SATA
I'm in Atlanta today, on my way back to Tucson, but wanted to talk about IBM's entry-level iSCSI offerings, based on comments on this week's discussion about Dell's acquisition of EqualLogic.
Analysts were quick to comment on this when the news broke.Tony Asaro gave his take on [Dell's Logic - The Storage Market is No Longer Equal], and Steve Duplessie writes [Dell Just Bought N.H.’s Tech Sector]. The last time I remember Steve talking about EqualLogic, [Catching Up], he had the funniestquote:
"EqualLogic didn’t get 2,000 customers because people were dying to use iSCSI. It got them because it built systems that scale dynamically and because a system the size of Montana can be managed by someone as clueless as my ex-wife."
As with any acquisition, people might be asking if this is a "match made in heaven" that makes strong business sense,or another HP-Compaq debacle. Back in September, I posted [Supermarkets and Specialty Shops] to explain how the storage marketplace has two market segments. Internally, IBM distinguishesbetween "clients" and "customers". Clients are those that buy services and complete solutions from a one-stop systems vendor, such as IBM, HP, Sun, or Dell, or systems integrator like IBM, CSC or EDS. Customers are those that buy products and components, from the systems vendors I just mentioned, as well as from individual specialty shops, like EMC, HDS, or NetApp.
To reach the growing "supermarket" segment, specialty shops are dependent on systems vendors to OEM or resell their kit: EMC disk through Dell, HDS disk through Sun and HP, NetApp through IBM. Until now, EqualLogichad to make their living as a "specialty" shop, but iSCSI appeals more to SMB than large enterprises, andSMB tend to be in the "supermarket" segment, so they partnered with Sun. Here is the timeline of this likely awkwardand strained relationship:
I am not surprised that I haven't seen anything in the blogosphere yet from HP, Dell or Sun. I suspect this news meansthat Sun won't be reselling Dell's EqualLogic boxes anymore, and perhaps there is nothing more for Sun bloggers Randy Chalfant or Nigel Dessau to add to that. HP and Dell are practically non-existent in the storage blogosphere, so I didn't expect much from them either.
I did, however, expect EMC to put in their spin, given that Dell resells EMC disk, and accounts for perhaps 15% of their revenues.Now that Dell has multiple offerings, they will be instructing their channel reps when to lead with EqualLogic versus when to sell EMC, for now, until 2011, at which point may simplify their storage sales model to just EqualLogic. I don't know if Dell would do that in 2011. Depending on how quick the decline happens, EMC may have to increase the pricesof their gear, or cut into their development budgets, to make up for this loss.
I started this post because of a comment from EMC blogger Chuck Hollis, who speculates how this will impact[Dell, EqualLogic and EMC].In that post, he expresses his opinion (which I will put into a different color):
"Speculation is pretty evenly split. Neither HP nor IBM have a good, entry-level iSCSI product."
If he had left out the word "good", then that would just be a false statement, but by adding the word "good" reduces this to merely an opinion of IBM products that I disagree with. (I have no experience with whateverHP sells in this category, nor talked to any customers about their experiences, so will neither agree nordisagree with Chuck's opinion of the HP half of his statement). As for the term "Entry-level", this is fairly well defined by analysts as a storage system under $50,000 US Dollars. Actually, IBM has three good offerings.
Our basic, lowest-price model is the IBM System Storage DS3300, which does iSCSI only, like the EqualLogic offerings. This supports both SAS and SATA disks, and can attach to our System x and System p server product lines.
Our smallest model of our fancier IBM System Storage N series not only supports iSCSI, but also CIFS, NFS,HTTP, FTP, and FCP protocols, what we call "Unified Storage". The iSCSI feature is included at no additional charge, and small customers can start with this, then scale up to larger N3600, N5000 or N7000 models, andadd more protocols and software features, as their business grows.
Our next larger model, but still entry-level, is the N3600. Since the N series supports a unified multi-protocolplatform, with features like SnapLock for regulatory compliance and SnapMirror for remote disk mirroring. The IBM System Storage N series easily replaces any mix of EMC "C-boxes": Centera, Celerra, and CLARiiON.
Both the DS3300 and the N series support the various Business Applications I have discussed this week, Microsoft Exchange, Lotus Domino, SAP, Oracle, Siebel, JD Edwards and PeopleSoft. N series offers SnapManager for variousapplications to make the business value even that much better.
Chuck speculates that Dell did this to compete better against rival HP, but that doesn't make sense, sincehe feels HP didn't have much to offer in this space. Perhaps Dell did this to competebetter against IBM, the number one vendor in storage hardware, according to IDC. Looking at what IBM andNetApp have to offer, Dell may have realized that they didn't have competitive disk systems from their resellingrelationship with EMC, looked elsewhere and found EqualLogic. Meanwhile, EqualLogic probably felt that Sun wasgoing out of business, or not yet fully supportive of IP SAN environments, and decided to ["switch horses midstream"].
For more about the DS3300 or N series, see my [Announcement Recap of October 2007] or visit our [www.ibm.com/storage] website.
technorati tags: IBM, entry-level, iSCSI, Dell, EqualLogic, ESG, Tony Asaro, Steve Duplessie, Montana, ex-wife, HP, Compaq, systems vendors, systems integrators, supermarket, specialty, products, components, services, solutions, Chuck Hollis, Sun, NetApp, HDS, Exchange, Domino, SAP, Oracle, Siebel, JD Edwards, PeopleSoft, IDC, DS3300, N3300, N3600
Continuing my week in Chicago for the IBM Storage and Storage Networking Symposium and System x and BladeCenter Technical Conference, I presented a variety of topics.
- Hybrid Storage for a Green Data Center
The cost of power and cooling has risen to be a #1 concern among data centers. I presented the following hybrid storage solutions that combine disk with tape. These provide the best of both worlds, the high performance access time of disk with the lower costs and reduced energy consumption of tape.
- IBM [System Storage DR550] - IBM's Non-erasable, Non-rewriteable (NENR) storage for archive and compliance data retention
- IBM Grid Medical Archive Solution [GMAS] - IBM's multi-site grid storage for PACS applications and electronic medical records[EMR]
- IBM Scale-out File Services [SoFS] - IBM's scalable NAS solution that combines a global name space with a clustered GPFS file system, serving as the ideal basis for IBM's own[Cloud Computing and Storage] offerings
Not only do these help reduce energy costs, they provide an overall lower total cost of ownership (TCO) thantraditional WORM optical or disk-only storage configurations.
- The Convergence of Networks - Understanding SAN, NAS and iSCSI in the Data Center Network
This turned out to be my most popular session. Many companies are at a crossroads in choosing data and storage networking solutions in light of recent announcements from IBM and others. In the span of 75 minutes, I covered:
- Block storage concepts, storage virtualization and RAID levels
- File system concepts, how file systems map files to block storage
- Network Attach Storage, the history of the NFS and CIFS protocols, Pros and Cons of using NAS
- Storage Area Networks, the history of SAN protocols including ESCON, FICON and FCP, Pros and Cons of using SAN
- IP SAN technologies, iSCSI and Fibre Channel over Ethernet (FCoE), Pros and Cons of using this approach
- Network Convergence with Infiniband and Fibre Channel over Convergence Enhanced Ethernet (FCoCEE), why Infiniband was not adopted historically in the marketplace as a storage protocol, and the features and enhancements of Convergence Enhanced Ethernet (CEE) needed to merge NAS, SAN and iSCSI traffic onto a single converged data center network [DCN]
Yes, it was a lot of information to cover, but I managed to get it done on time.
- IBM Tivoli Storage Productivity Center version 4.1 Overview and Update
In conferences like these, there are two types of product-level presentations. An "Overview" explains howproducts work today to those who are not familiar with it. An "Update" explains what's new in this version of the product for those who are already familiar with previous releases. I decided to combine these into one sessionfor IBM's new version of [Tivoli Storage Productivity Center].I was one of the original lead architects of this product many years ago, and was able to share many personalexperiences about its evolution in development and in the field at client facilities.Analysts have repeatedly rated IBM Productivity Center as one of the top Storage Resource Management (SRM) tools available in the marketplace.
- Information Lifecycle Management (ILM) Overview
Can you believe I have been doing ILM since 1986? I was the lead architect for DFSMS which provides ILM support for z/OS mainframes. In 2003-2005, I spent 18 months in the field performingILM assessments for clients, and now there are dozens of IBM practitioners in Global Technology Services andSTG Lab Services that do this full time. This is a topic I cover frequently at the IBM Executive Briefing Center[EBC], because it addressesseveral top business challenges:
- Reducing costs and simplifying management
- Improving efficiency of personnel and application workloads
- Managing risks and regulatory compliance
IBM has a solution based on five "entry points". The advantage of this approach is that it allows our consultants to craft the right solution to meet the specific requirements of each client situation. These entry points are:
- Enterprise Content Management [ECM]
- Tiered Information Infrastructure - we don't limit ourselves to just "Tiered Storage" as storage is only part of a complete[information infrastructure] of servers,networks and storage
- Storage Optimization and Virtualization - including virtual disk, virtual tape and virtual file solutions
- Process Enhancement and Automation - an important part of ILM are the policies and procedures, such as IT Infrastructure Library [ITIL] best practices
- Archive and Retention - space management and data retention solutions for email, database and file systems
I did not get as many attendees as I had hoped for this last one, as I was competing head-to-head in the same time slot as Lee La Frese covering IBM's DS8000 performance with Solid State Disk (SSD) drives, John Sing covering Cloud Computing and Storage with SoFS, and Eric Kern covering IBM Cloudburst.
I am glad that I was able to make all of my presentations at the beginning of the week, so that I can then sit back and enjoy the rest of the sessions as a pure attendee.
technorati tags: IBM, Symp09, storage symposium, hybrid storage, DR550, NENR, WORM, GMAS, SoFS, PACS, EMR, NAS, GPFS, SAN, iSCSI, FCoE, FCoCEE, CEE, DCN, TCO, RAID, ESCON, FICON, Infiniband, Tivoli, Productivity Center, ILM, virtualization, ITIL, DS8000, SSD, Cloudburst, Information Infrastructure
To make true advances in any industry or field requires forward thinking—as well as industry insight and experience. It can't be done just by packaging a bag of piece parts and putting a new label on it. But forward thinkers are putting smarter, more powerful technology to uses that were once unimaginable -- either in scale or in progress.
I am pleased that IBM has honored me with recognition as a "forward thinker" on the corporate-wide [IBM Smarter Planet for Smarter IT systems and Infrastructure]. This is quite an honor, being one of the "faces" of IBM's Smarter Planet campaign. I am joined by my esteemed colleagues: [Brian Sanders], [Steve Will], [Willie Favero], and [Kathleen Holm].
The graphics developed for the IBM Smarter Planet vision are interesting. This one for Infrastructure includes images relating to public utilities, like gas, water and electricity, clouds representing cloud computing, green forests representing the need for energy efficiency and reducing carbon footprint to fight global warming, roads, representing the intricate transportation and traffic systems, highways and city streets that connect us all together, and a printed circuit board, representing the Information Technology that makes all of this possible.
Ironically, I didn't even know I made the final cut until I got three, yes three, separate requests for interviews about it. I already reached the "million hits" milestone. Other people track these things for me, so it will be interesting how much additional traffic my latest [15 minutes of fame] will generate.
Infrastructure is just one of the 25 different areas that IBM's vision for a Smarter Planet is trying to address, including the need for smarter buildings, smarter cities, smarter transportation systems, smarter energy grids, smarter healthcare and public safety, and smarter governments.
To learn more, visit the [Smarter Planet overview] landing page. Together, we can build a smarter planet!
technorati tags: IBM, Brian Sanders, Steve Will, Willie Favero, Kathleen Holm, Smarter Planet, Infrastructure, forward thinker
Well, this week I am in Maryland, just outside of Washington DC. It's a bit cold here.
Robin Harris over at StorageMojo put out this Open Letter to Seagate, Hitachi GST, EMC, HP, NetApp, IBM and Sun about the results of two academic papers, one from Google, and another from Carnegie Mellon University (CMU). The papers imply that the disk drive module (DDM) manufacturers have perhaps misrepresented their reliability estimates, and asks major vendors to respond. So far, NetAppand EMC have responded.
I will not bother to re-iterate or repeat what others have said already, but make just a few points. Robin, you are free to consider this "my" official response if you like to post it on your blog, or point to mine, whatever is easier for you. Given that IBM no longer manufacturers the DDMs we use inside our disk systems, there may not be any reason for a more formal response.
- Coke and Pepsi buy sugar, Nutrasweet and Splenda from the same sources
Somehow, this doesn't surprise anyone. Coke and Pepsi don't own their own sugar cane fields, and even their bottlers are separate companies. Their job is to assemble the components using super-secret recipes to make something that tastes good.
IBM, EMC and NetApp don't make DDMs that are mentioned in either academic study. Different IBM storage systems uses one or more of the following DDM suppliers:
- Seagate (including Maxstor they acquired)
- Hitachi Global Storage Technologies, HGST (former IBM division sold off to Hitachi)
In the past, corporations like IBM was very "vertically-integrated", making every component of every system delivered.IBM was the first to bring disk systems to market, and led the major enhancements that exist in nearly all disk drives manufactured today. Today, however, our value-add is to take standard components, and use our super-secret recipe to make something that provides unique value to the marketplace. Not surprisingly, EMC, HP, Sun and NetApp also don't make their own DDMs. Hitachi is perhaps the last major disk systems vendor that also has a DDM manufacturing division.
So, my point is that disk systems are the next layer up. Everyone knows that individual components fail. Unlike CPUs or Memory, disks actually have moving parts, so you would expect them to fail more often compared to just "chips".
If you don't feel the MTBF or AFR estimates posted by these suppliers are valid, go after them, not the disk systems vendors that use their supplies. While IBM does qualify DDM suppliers for each purpose, we are basically purchasing them from the same major vendors as all of our competitors. I suspect you won't get much more than the responses you posted from Seagate and HGST.
- American car owners replace their cars every 59 months
According to a frequently cited auto market research firm, the average time before the original owner transfers their vehicle -- purchased or leased -- is currently 59 months.Both studies mention that customers have a different "definition" of failure than manufacturers, and often replace the drives before they are completely kaput. The same is true for cars. Americans give various reasons why they trade in their less-than-five-year cars for newer models. Disk technologies advance at a faster pace, so it makes sense to change drives for other business reasons, for speed and capacity improvements, lower power consumption, and so on.
The CMU study indicated that 43 percent of drives were replaced before they were completely dead.So, if General Motors estimated their cars lasted 9 years, and Toyota estimated 11 years, people still replace them sooner, for other reasons.
At IBM, we remind people that "data outlives the media". True for disk, and true for tape. Neither is "permanent storage", but rather a temporary resting point until the data is transferred to the next media. For this reason, IBM is focused on solutions and disk systems that plan for this inevitable migration process. IBM System Storage SAN Volume Controller is able to move active data from one disk system to another; IBM Tivoli Storage Manager is able to move backup copies from one tape to another; and IBM System Storage DR550 is able to move archive copies from disk and tape to newer disk and tape.
If you had only one car, then having that one and only vehicle die could be quite disrupting. However, companies that have fleet cars, like Hertz Car Rentals, don't wait for their cars to completely stop running either, they replace them well before that happens. For a large company with a large fleet of cars, regularly scheduled replacement is just part of doing business.
This brings us to the subject of RAID. No question that RAID 5 provides better reliability than having just a bunch of disks (JBOD). Certainly, three copies of data across separate disks, a variation of RAID 1, will provide even more protection, but for a price.
Robin mentions the "Auto-correlation" effect. Disk failures bunch up, so one recent failure might mean another DDM, somewhere in the environment, will probably fail soon also. For it to make a difference, it would (a) have to be a DDM in the same RAID 5 rank, and (b) have to occur during the time the first drive is being rebuilt to a spare volume.
- The human body replaces skin cells every day
So there are individual DDMs, manufactured by the suppliers above; disk systems, manufactured by IBM and others, and then your entire IT infrastructure. Beyond the disk system, you probably have redundant fabrics, clustered servers and multiple data paths, because eventually hardware fails.
People might realize that the human body replaces skin cells every day. Other cells are replaced frequently, within seven days, and others less frequently, taking a year or so to be replaced. I'm over 40 years old, but most of my cells are less than 9 years old. This is possible because information, data in the form of DNA, is moved from old cells to new cells, keeping the infrastructure (my body) alive.
Our clients should approach this in a more holistic view. You will replace disks in less than 3-5 years. While tape cartridges can retain their data for 20 years, most people change their tape drives every 7-9 years, and so tape data needs to be moved from old to new cartridges. Focus on your information, not individual DDMs.
What does this mean for DDM failures. When it happens, the disk system re-routes requests to a spare disk, rebuilding the data from RAID 5 parity, giving storage admins time to replace the failed unit. During the few hours this process takes place, you are either taking a backup, or crossing your fingers.Note: for RAID5 the time to rebuild is proportional to the number of disks in the rank, so smaller ranks can be rebuilt faster than larger ranks. To make matters worse, the slower RPM speeds and higher capacities of ATA disks means that the rebuild process could take longer than smaller capacity, higher speed FC/SCSI disk.
According to the Google study, a large portion of the DDM replacements had no SMART errors to warn that it was going to happen. To protect your infrastructure, you need to make sure you have current backups of all your data. IBM TotalStorage Productivity Center can help identify all the data that is "at risk", those files that have no backup, no copy, and no current backup since the file was most recently changed. A well-run shop keeps their "at risk" files below 3 percent.
So, where does that leave us?
- ATA drives are probably as reliable as FC/SCSI disk. Customers should chose which to use based on performance and workload characteristics. FC/SCSI drives are more expensive because they are designed to run at faster speeds, required by some enterprises for some workloads. IBM offers both, and has tools to help estimate which products are the best match to your requirements.
- RAID 5 is just one of the many choices of trade-offs between cost and protection of data. For some data, JBOD might be enough. For other data that is more mission critical, you might choose keeping two or three copies. Data protection is more than just using RAID, you need to also consider point-in-time copies, synchronous or asynchronous disk mirroring, continuous data protection (CDP), and backup to tape media. IBM can help show you how.
- Disk systems, and IT environments in general, are higher-level concepts to transcend the failures of individual components. DDM components will fail. Cache memory will fail. CPUs will fail. Choose a disk systems vendor that combines technologies in unique and innovative ways that take these possibilities into account, designed for no single point of failure, and no single point of repair.
So, Robin, from IBM's perspective, our hands are clean. Thank you for bringing this to our attention and for giving me the opportunity to highlight IBM's superiority at the systems level.
technorati tags: IBM, Seagate, Hitachi, HGST, EMC, NetApp, HP, HDS, Sun, Google, CMU, DDM, Fujitsu, MTBF, MTTF, AFR, ARR, JBOD, RAID, Tivoli, SVC, DR550, CDP, FC, SCSI, disk, tape, SAN,
Two weeks ago, I mentioned in my post [Pulse 2008 - Day 2 Breakout sessions
] thatHenk de Ruiter from ABN Amro bank presented his success storyimplementing Information Lifecycle Management (ILM) across hisvarious data centers. I am no stranger to ABN Amro, having helped "ABN" and "Amro" banks merge their mainframe data in 1991. Henk has agreed to let me share with my readers more ofthis success story here on my blog:
Back in December 2005, Henkand his colleagues had come to visit the IBM Tucson ExecutiveBriefing Center (EBC) to hear about IBM products and services. At the time, I was part of our "STG Lab Services" team that performed ILM assessments at client locations. I explained to ABN Amro that the ILM methodology does not requirean all-IBM solution, and that ILM could even provide benefits with their current mix of storage, software and service providers.The ABN Amro team liked what I had to say, andmy team was commissioned to perform ILM assessments atthree of their data centers:
- Amsterdam (Netherlands)
- Sao Paulo (Brazil)
- Chicago, IL (USA)
Each data center had its own management, its owndecision making, and its own set of issues, so we structuredeach ILM assessment independently. When we presented our results,we showed what each data center could do better with their existing mixed bagof storage, software and service providers, and also showed howmuch better their life would be with IBM storage, software andservices. They agreed to give IBM a chance to prove it, and soa new "Global Storage Study" was launched to take the recommendationsfrom our three ILM studies, and flesh out the details to make aglobally-integrated enterprise work for them. Once completed,it was renamed the "Global Storage Solution" (GSS).
Henk summarized the above with "I am glad to see Tony Pearsonin the audience, who was instrumental to making this all happen."As with many client testimonials, he presented a few charts onwho ABN Amro is today, the 12th largest bank worldwide, 8th largest in Europe. They operate in 53 countries and manage over a trillioneuros in assets.
They have over 20 data centers, with about 7 PB of disk, and over20 PB of tape, both growing at 50 to 70 percent CAGR. About 2/3 of theiroperations are now outsourced to IBM Global Services, the remaining 1/3is non-IBM equipment managed by a different service provider.
ABN Amro deployed IBM TotalStorage Productivity Center, variousIBM System Storage DS family disk systems, SAN Volume Controller (SVC), Tivoli StorageManager (TSM), Tivoli Provisioning Manager (TPM), and several other products. Armed with these products, they performed the following:
- Clean Up. IBM uses the term "rationalization" to relate to the assignment of business value, to avoid confusion with theterm "classification" which many in IT relate to identifyingownership, read and write authorization levels. Often, in theinitial phases of an ILM deployment, a portion of the data isdetermined to be eligible for clean up, either to move to a lower-cost tier or deleted immediately. ABN Amro and IBM set a goal to identifyat least 20 percent of their data for clean up.
- New tiers. Rather than traditional "storage tiers" which are often justTier 1 for Fibre Channel disk and Tier 2 for SATA disk, ABN Amroand IBM came up with seven "information infrastructure tiers" thatincorporate service levels, availability and protection status.They are:
- High-performance, Highly-available disk with Remote replication.
- High-performance, Highly-available disk (no remote replication)
- Mid-performance, high-capacity disk with Remote replication
- Mid-performance, high-capacity disk (no remote replication)
- Non-erasable, Non-rewriteable (NENR) storage employinga blended disk and tape solution.
- Enterprise Virtual Tape Library with remote replicationand back-end physical tape
- Mid-performance physical tape
These tiers are applied equally across their mainframe anddistributed platforms. All of the tiers are priced per "primary GB", so any additional capacity required for replication orpoint-in-time copies, either local or remote, are all folded into the base price.ABN Amro felt a mission-critical applicationon Windows or UNIX deserves the same Tier 1 service level asa mission-critical mainframe application. Exactly!
- Deployed storage virtualization for disk and tape. Thisinvolved the SAN Volume Controller and IBM TS7000 series library.
- Implemented workflow automation. The key product here is IBM Tivoli Provisioning Manager
- Started an investigation for HSM on distributed. This would be policy-based space management to migrate lessfrequently accessed data to the TSM pool for Windows or UNIX data.
While the deployment is not yet complete, ABN Amro feels they have alreadyrecognized business value:
- Reduced cost by identifying data that should be stored on lower tiers
- Simplified management, consolidated across all operating systems (mainframe, UNIX, Windows)
- Increased utilization of existing storage resources
- Reduced manual effort through policy-based automation, which can lead to fewer human errors and faster adaptability to new business opportunities
- Standardized backup and other operational procedures
Henk and the rest of ABN Amro are quite pleased with the progress so far,although recent developments in terms of the takeover of ABN AMRO by aconsortium of banks means that the model is only implemented so far in Europe. Further rollout depends on the storage strategy of the new owners. Nonetheless,I am glad that I was able to work with Henk, Jason, Barbara, Steve, Tom, Dennis, Craig and othersto be part of this from the beginning and be able to see it rollout successfully over the years.
For more about what was presented at Pulse 2008 conference, see the videos of the keynotespeakers at [IBM Pulse - YouTube channel]!
technorati tags: IBM, ABN Amro, Henk de Ruiter, merge, mainframe, Tucson, Executive Briefing Center, EBC, STG, Lab Services, ILM, Amsterdam, Netherlands, Sao Paulo, Brazil, Chicago, Global Storage, study, solution, Productivity Center, DS8000, DS4000, SVC, storage tiers, rationalization, NENR, FC, SATA, Windows, UNIX, TS7000, HSM
Over on his Backup Blog
, fellow blogger Scott Waterhouse from EMC has a post titled
[Backup Sucks: Reason #38
]. Here is an excerpt:
Unfortunately, we have not been able to successfully leverage economies of scale in the world of backup and recovery. If it costs you $5 to backup a given amount of data, it probably costs you $50 to back up 10 times that amount of data, and $500 to back up 100 times that amount of data.
If anybody can figure out how to get costs down to $40 for 10 times the amount of data, and $300 for 100 times the amount of data, they will have an irrefutable advantage over anybody that has not been able to leverage economies of scale.
I suspect that where Scott mentions we in the above excerpt, he is referring to EMC in general, with products like
Legato. Fortunately, IBM has scalable backup solutions, using either a hardware approach, or one purely with software.
- Hardware Approach
The hardware approach involves using deduplication hardware technology as the storage pool for IBM Tivoli Storage Manager (TSM). Using this approach, IBM Tivoli Storage Manager would receive data from dozens, hundreds or even thousands
of client nodes, and the backup copies would be sent to an IBM TS7650 ProtecTIER data deduplication appliance, IBM TS7650G gateway, or IBM N series with A-SIS. In most cases, companies have standardized on the operating systems and applications used on these nodes, and multiple copies of data reside across employee laptops. As a result, as you have more nodes backing up, you are able to achieve benefits of scale.
- Software Approach
Perhaps your budget isn't big enough to handle new hardware purchases at this time, in this economy. Have no fear,
IBM also offers deduplication built right into the IBM Tivoli Storage Manager v6 software itself. You can use sequential access disk storage pool for this. TSM scans and identifies duplicate chunks of data in the backup copies, and also archive and HSM data, and reclaims the space when found.
If your company is using a backup software product that doesn't scale well, perhaps now is a good time to switch over to IBM Tivoli Storage Manager. TSM is perhaps the most scalable backup software product in the marketplace, giving IBM an "irrefutable advantage" over the competition.
technorati tags: IBM, Scott Waterhouse, EMC, Legato, Tivoli, TSM, deduplication, ProtecTIER, N series, A-SIS
Continuing my week in Chicago, for the IBM Storage Symposium 2008, I attended several sessions intended to answer the questions of the audience.
In an effort to be cute, the System x team have a "Meet the xPerts" session at their System x and BladeCenter Technical Conference, so the storage side decided to do the same. Traditionally, these have been called "Birds of a Feature", "Q&A Panel", or "Free-for-All". They allow anyone to throw out a question, and have the experts in the room, either
IBM, Business Partner or another client, answer the question from their experience.
- Meet the Experts - Storage for z/OS environments
Here were some of the questions answered:
- I've seen terms like "z/OS", "zSeries" and "System z" used interchangeably, can you help clarify what this particular session is about?
IBM's current mainframe servers are all named "System z", such as our System z9 or System z10. These replace the older zSeries models of hardware. z/OS is one of the six operating systems that run on this hardware platform. The other five are z/VM, z/VSE, z/TPF, Linux and OpenSolaris. The focus of this session will be storage attached and used for z/OS specifically, including discussions of Omegamon and DFSMS software products.
- What can we do to reduce our MIPS-based software licensing costs from our third party vendors?
Consider using IBM System z Integrated Information Processor
- What about 8 Gbps FICON?
IBM has already announced
[FICON Express8] host bus adapter (HBA) cards, that will auto-negotiate to 4Gbps and 2Gbps speeds. If you don't need full 8Gbps speed now, you can
still get the Express8 cards, but put 4/2/1 Gbps SFP ports instead. Currently, LongWave (LW) is only supported to 4km at 8Gbps speed.
- I want to use Global Mirror for my DS8100 to my remote DS8100, but also make test copies of my production data to
an older ESS 800 I have locally. Any suggestions? Yes, consider using FlashCopy to simplify this process.
- I have Global Mirror (GM) running now successfully with DSCLI, and now want to deploy IBM Tivoli Storage Productivity Center for Replication. Is that possible? Yes, Productivity Center for Replication will detect existing GM relationships, and start managing them.
- I have already deployed HyperPAV and zHPF, is there any value in getting Solid-State Drives as well?
HyperPAV and zHPF impact CONN time, but SSD impacts DISC time, so they are mutually complementary.
- How should I size my FlashCopy SE pool? SE refers to "Space Efficient", which stores only the changes
between the source and destination copies of each LUN or CKD volume involved. General recommendation is to start with 20 percent and adjust accordingly.
- How many RAID ranks should I configure per DS8000 extent pool? IBM recommends 4 to 8 ranks per pool.
- Meet the Experts: Storage for Linux, UNIX and Windows distributed systems
This session was focused on storage systems attached to distributed servers, as well as products from Tivoli used to manage them. Here were some of the questions answered:
- When we migrated from Tivoli Storage Manager v5 to v6, we lost our favorite "Operational Reporting" tool. How can we get TOR back? You now get the new Tivoli Common Reporting tool.
- How can we identify appropriate port distribution for multiple SVC node pairs for load balancing?
IBM Tivoli Storage Productivity Center v4.1 has hot-spot analysis with recommendations for Vdisk migrations.
- We tried TotalStorage Productivity Center way back when, but the frequent upgrades were killing us. How has it been lately? It has been much more stable since v3.3, and completely renamed to Tivoli Storage Productivity Center to avoid association with versions 1 and 2 of the predecessor product. The new "lightweight agents" feature of v4.1 resolve many of the problems you were experiencing.
- We have over 1600 SVC virtual disks, how do we handle this in IBM Tivoli Storage Productivity Center? Use the Filter capability in combination with clever naming conventions for your virtual disks.
- How can we be clever when we are limited to only 15 characters? Ok. We understand.
- We are currently using an SSPC with Windows 2003 and 2GB memory, but we are only using the Productivity Center for Replication feature of it. Can we move the DB2 database over to a Windows 2008 server with 4GB of memory?
Consider using the IBM Tivoli Storage Productivity Center for Replication software instead of SSPC for special
circumstances like this.
- We love the XIV GUI, how soon will all other IBM storage products have it also? As with every acquisition,
IBM evaluates if there are technologies from new products that can be carried back to existing products.
- We are currently using 12 ports on our existing XIV, and love it so much we plan to buy a second frame, but are concerned about consuming another 12 ports on our SAN switch. Any suggestions? Yes, use only six ports per frame. Just because you have more ports, doesn't mean you are required to use them.
- We have heard there are concerns from the legal community about using deduplication technology, any ideas how to address that?
Nobody here in the room is a lawyer, and you should consult legal counsel for any particular situation.
None of the IBM offerings intended for non-erasable, non-rewriteable (NENR) data retention records (DR550, WORM tape, N series SnapLock) support dedupe today, and none of IBM's deduplication offerings (TS7650,N series A-SIS,TSM) make any claims for fit-for-purpose for compliance regulatory storage. However, be assured that all of IBM's dedupe technology involves byte-for-byte comparisons so that you never lose any data due to false hash collisions. For all IBM compliance storage, what you write will be read back in the correct sequence of ones and zeros.
technorati tags: IBM, z/OS, System z, DFSMS, Omegamon, z/VM, z/VSE, z/TPF, Linux, OpenSolaris, Tivoli, Storage Manager, TSM, Productivity Center, SVC, XIV, GUI, WORM, DR550, NENR, SnapLock, A-SIS
This week is Thanksgiving holiday in the USA, so I thought a good theme would be things I am thankful for.
I'll start with saying that I am thankful EMC has finally announcedAtmos last week. This was the "Maui" part of the Hulk/Maui rumors we heard over a year ago. To quickly recap, Atmos is EMC's latest storage offeringfor global-scale storage intended for Web 2.0 and Digital Archive workloads. Atmos can be sold as just software, or combined with Infiniflex,EMC's bulk, high-density commodity disk storage systems. Atmos supports traditionalNFS/CIFS file-level access, as well as SOAP/REST object protocols.
I'm thankful for various reasons, here's a quick list:
- It's hard to compete against "vaporware"
Back in the 1990s, IBM was trying to sell its actual disk systems against StorageTek's rumored "Iceberg" project. It took StorageTek some four years to get this project out,but in the meantime, we were comparing actual versus possibility. The main feature iswhat we now call "Thin Provisioning". Ironically, StorageTek's offering was not commercially successful until IBM agreed to resell this as the IBM RAMAC Virtual Array (RVA).
Until last week, nobody knew the full extent of what EMC was going to deliver on the many Hulk/Maui theories. Severalhinted as to what it could have been, and I am glad to see that Atmos falls short of those rumored possibilities. This is not to say that Atmos can't reach its potential, and certainly some of the design is clever, such as offering native SOAP/REST access.
Instead, IBM now can compare Atmos/Infiniflex directly to the features and capabilities of IBM's Scale Out File Services [SoFS], which offers a global-scale multi-site namespace with policy-based data movement, IBM System Storage Multilevel Grid Access Manager[GAM] that manages geographical distrubuted information,and IBM [XIV Storage System] that offers high-density bulk storage.
- Web 2.0 and Digital Archive workloads justify new storage architectures
When I presented SoFS and XIV earlier this year, I mentioned they were designed forthe fast-growing Web 2.0 and Digital Archive workloads that were unique enough to justify their own storage architectures. One criticism was that SoFS appeared to duplicate what could be achieved with dozens of IBM N series NAS boxes connected with Virtual File Manager (VFM). Why invent a new offering with a new architecture?
With the Atmos announcement, EMC now agrees with IBM that the Web 2.0 and DigitalArchive workloads represent a unique enough "use case" to justify a new approach.
- New offerings for new workloads will not impact existing offerings for existing workloads
I find it amusing that EMC is quickly defending that Atmos will not eat into its DMXbusiness, which is exactly the FUD they threw out about IBM XIV versus DS8000 earlier this year. In reality, neither the DS8000 nor the DMX were used much for Web 2.0 andDigital Archive workloads in the past. Companies like Google, Amazon and others hadto either build their own from piece parts, or use low-cost midrange disk systems.
Rather, the DS8000 and DMX can now focus on the workloads they were designed for,such as database applications on mainframe servers.
- Cloud-Oriented Storage (COS)
Just when you thought we had enough terminology already, EMC introduces yet another three-letter acronym [TLA]. Kudos to EMC for coining phrases to help move newconcepts forward.
Now, when an RFP asks for Cloud-oriented storage, I am thankful this phrase will help serve as a trigger for IBM to lead with SoFS and XIV storage offerings.
- Digital archives are different than Compliance Archives
EMC was also quick to point out that object-storage Atmos was different from theirobject-storage EMC Centera. The former being for "digital archives" and the latter for"compliance archives". Different workloads, Different use cases, different offerings.
Ever since IBM introduced its [IBM System Storage DR550] several years ago, EMC Centera has been playing catch-up to match IBM'smany features and capabilities. I am thankful the Centera team was probably too busy to incorporate Atmos capabilities, so it was easier to make Atmos a separate offering altogether. This allows the IBM DR550 to continue to compete against Centera's existingfeature set.
- Micro-RAID arrays, logical file and object-level replication
I am thankful that one of the Atmos policy-based feature is replicating individualobjects, rather than LUN-based replication and protection. SoFS supports this forlogical files regardless of their LUN placement, GAM supports replication of files and medical images across geographical sites in the grid, and the XIV supports this for 1MBchunks regardless of their hard disk drive placement. The 1MB chunk size was basedon the average object size from established Web 2.0 and DigitalArchive workloads.
I tried to explain the RAID-X capability of the XIV back in January, under muchcriticism that replication should only be done at the LUN level. I amthankful that Marc Farley on StorageRap coined the phrase[Micro-RAID array] to helpmove this new concept further. Now, file-level, object-level and chunk-level replication can be considered mainstream.
- Much larger minimum capacity increments
The original XIV in January was 51TB capacity per rack, and this went up to 79TB per rack for the most recent IBM XIV Release 2 model. Several complained that nobody would purchase disk systems at such increments. Certainly, small and medium size businessesmay not consider XIV for that reason.
I am thankful Atmos offers 120TB, 240TB and 360TB sizes. The companies that purchasedisk for Web 2.0 and Digital Archive workloads do purchase disk capacity in these large sizes. Service providers add capacity to the "Cloud" to support many of theirend-clients, and so purchasing disk capacity to rent back out represents revenue generating opportunity.
- Renewed attention on SOAP and REST protocols
IBM and Microsoft have been pushing SOA and Web Services for quite some time now.REST, which stands for [Representational State Transfer] allows static and dynamic HTML message passing over standard HTTP.SOAP, which was originally [Simple Object Access Protocol], and then later renamed to "Service Oriented Architecture Protocol", takes this one step further, allowingdifferent applications to send "envelopes" containing messages and data betweenapplications using HTTP, RPC, SMTP and a variety of other underlying protocols.Typically, these messages are simple text surrounded by XML tags, easily stored asfiles, or rows in databases, and served up by SOAP nodes as needed.
- It's hard to show leadership until there are followers
IBM's leadership sometimes goes unnoticed until followerscreate "me, too!" offerings or establish similar business strategies. IBM's leadership in Cloud and Grid computing is no exception.Atmos is the latest me-too product offering in this space, trying pretty muchto address the same challenges that SoFS and XIV were designed for.
So, perhaps EMC is thankful that IBM has already paved the way, breaking throughthe ice on their behalf. I am thankful that perhaps I won't have to deal with as much FUD about SoFS, GAM and XIV anymore.
technorati tags: IBM, SoFS, XIV, GAM, DS8000, EMC, Atmos, Hulk, Maui, Infiniflex, STK, StorageTek, Iceberg, RVA, thin provisioning, VFM, SOAP, REST, DMX, RAID-X, Micro-RAID
While many are just becoming familiar with the end-user interfaces of Web 2.0, from blogs and wikis to FaceBook and FlickR, fewer may be familiar with the "information infrastructure" of servers and storagebehind the scenes.
Last year, I bought an XO laptop under the One Laptop Per Child [OLPC] foundation's Give-1-Get-1 program and posted my impressions on this blog. One in particular, my post[Printingon XO laptop with CUPS and LPR] showed how to print from the XO laptop over to a network-attached printer.This caught the attention of the OLPC development team, who asked me tohelp them with another project as a volunteer. Before accepting, I had to learn what skills they were really looking for, especially since I do notconsider myself an expert in neither printing nor networking.
(Unlike a regular 9-to-5 job where most people just try to look busy for eight hours a day, doingvolunteer work means being ready to ["roll up your sleeves"] and actuallyaccomplish something. This applies to any kind of volunteer work, from hammering nails for [Habitat for Humanity] to sorting cans at the [Community Food Bank].Best Buy uses the phrase "Results Oriented Work Environment" [ROWE] to describetheir latest program, modeled in part after the mobile workforce policies of Web2.0-enlightened companiesIBM and Sun, but that is perhaps a topic for another blog post!)
Apparently, to support a school full of students with XO laptops, it would be nice to have a few serversthat provide support to manage the class lesson plans, make reading materials and other content available,and keep track of results. What they need is an "information infrastructure"! They decided on two specific servers:
- School Server -- this would run a popular class management system called [Moodle]
- Library Server -- a server for a digital library collection, based on Fedora Commons[16-minute video]
In keeping with OLPC philosophy to use free and open source software[FOSS
], both servers are based on the [LAMP
] platform. LAMP is an acronym for thecombined software bundle of Linux, Apache, MySQL and a Programming language like PHP. The "XS" team working onthe school server wanted me to build a LAMP server and install Moodle to help test the configuration, determinewhat other software is required, and perhaps develop a backup/recovery scenario. Basically, they needed someone with Linux skills to put some hardware and software together.
(I am no stranger to Linux. Back in the 1990s, I was part of the Linux for S/390 team, led the effort to createthe infamous "compatible disk layout" (CDL) that allows z/OS to access ESCON and FICON-attached Linux volumes,took my LPI certification exam, and led a team to validate FCP drivers for our disk and tape storage systems. For an IBMer to volunteer foran Open Source community project, you have to take an "open source" class and get management approval to reviewfor any possible "conflicts of interest". I got this all taken care of, and accepted to help the XS team.)
Building a test environment is similar to baking a cake. You have a recipe, utensils, and ingredients. Here'sa bit of description of each of the ingredients:
Like Windows, the Linux operating system comes in different flavors to run on handhelds, desktops and servers. For servers, IBM tends to focus on Red Hat Enterprise Linux (RHEL) and SUSE Linux Eneterprise Server (SLES). However, the XS team decidedinstead to use [Fedora 7], a community-supported version from Red Hat. Earlier versions of Fedora were known as "Fedora Core", but apparently with version 7, the word "Core" has been dropped. Fedora 7 can be used in either desktop or server mode.
[Apache] is web server software, and half of all web servers on the internet use it. It competes head-on against Micorosofts Internet Information Services (IIS) serverprovided in Windows 2003. The Apache name is partly from thefact that its origins were "a patchy" variant of the NCSA HTTPd 1.3 codebase. Thepopular [IBM HTTP Server] is poweredby Apache, with added support to the rest of the IBM WebSphere software portfolio. The XS team chose Apache v2as the web server platform.
[MySQL] is a relational database management system (RDBMS) software, similar to commercial products like IBM DB2 Universal Database, Oracle DB, or Microsoft SQL Server. The SQL stands for Structured Query Language, developed by IBM in the early 1970s as a standard languageto update and query database tables. MySQL comes in two flavors, MySQL Enterprise for commercial use, and MySQLCommunity, which is community-supported. There are over 10 million instances of MySQL running websites on the internet, which helps explain why Sun Microsystems agreed to acquire MySQL AB company last month.The XS team decided on MySQL 5.0 as the database platform.
To make HTML pages dynamic, including the possibility to add or query database contents, requires programming.A variety of web scripting languages were developed, all starting with the letter "P" to claim to be the programming part of the LAMP platform, including [PHP], Perl, and Python. Later, new programming language frameworks have been developed that do not start with the letter "P", like [Ruby on Rails]. PHP is short for PHP: Hypertext Preprocessor which explains that it pre-processes HTML during web serving,looking for special tags indicating PHP code, allowing programming logic to insert HTML content, such as information extracted from a database.While Python is the language that runs the Sugar interface on the XO laptops, the XS team decided onPHP v5 as the programming language for the server.
As for utensils, you only need a few utilities
- A simple text editor: I go old-school and use the classic "vi" (to learn this editor, see the["Cheat Sheet" method] on IBM Developerworks)
- secure socket shell (SSH): this allows you to access one server from another
- browser access to the internet: when you encounter problems, get error messages, or whatever, it pays to know how to search for things with Google
As for a recipe, the Moodle website spells out some unique details and parameters. For the base LAMP platform,I chose to follow the book [Fedora 7 Unleashed] that has specific chapters on setting up SSH, Apache, MySQL, PHP, Squid and so on. The resultingconfiguration looks like this:
Here were the sequence of events:
- I took an old PC that I wasn't using anymore, backed up the Windows system, and installed Linux on top. Thebook above had a Fedora 7 DVD on the back jacket, but I used the [OLPC LiveCD] that had some values pre-configured.
- Set the IP address static. I set mine to 192.168.0.77 which nobody sees except my other systems.
- My school server is "headless" which means it does not have its own keyboard, video or mouse. It also runs only to Linux run level 3, command line interface only, no graphics.I was able toshare using a KVM switch], but this meant having to remember something on one screen while I was switching over to the other. My Windows XP system has mybrowser connection to the internet to follow instructions or read error messages, so I need that up all thetime. To get around this, on my Windows XP system,I generated SSH public and private keys, copied the public key over to my new Linux system, and used [OpenSSH for Windows] to connect over. Now, on one screen,I have my Windows XP Firefox browser, and a separate command line window that is accessing my Linux schoolserver.
- With SSH up and running, I can now use "vi" to edit files, and issue commands to install or activatethe remaining software. First up, Apache. I got this working, and from Windows XP, verified that going to"http://192.168.0.77" showed the Apache test screen.
- I installed PHP, and tested it with a simple short index.php file.
- I installed MySQL, setup the base "installation databases", and created a test database. Here is whereyou might want to set a password for the MySQL root user, but I chose to do that later for now.
- I installed Moodle. It was smart enough to check that Apache, PHP, and MySQL were operational, andapparently I missed a few special "PHP" modules that had to be linked in. I was able to find them, downloadthem, and get them installed.
- I brought up Moodle, created a "class category" of SCIENCE and a new class "Chemistry 101", and it allworked.
- I also activated Squid, which is a web proxy cache server that stores web pages for faster access.
- Another idea was to activate Samba, to provide CIFS file and print sharing, but I decided to put this off.
I got all of this done last Saturday, start to finish. Now the fun begins. We are going to run throughsome tests, document the procedures, and try to get a system up and running in a remote school in Nepal. Fornow, I have only one XO laptop to simulate what the student sees, and one laptop that can represent eithera teacher's Windows-based laptop, or run QEMU and emulate a second XO laptop.For tuning, I might go through the procedures mentioned on IBM Developerworks "Tuning LAMP"[Part 1, Part 2,Part 3].
For those in the server or storage industry that need to understand Web 2.0 information infrastructure better,building a LAMP server like this can be quite helpful.
technorati tags: XO, OLPC, XS, Moodle, Fedora Commons, LAMP, Linux, Apache, MySQL, PHP, Squid, CIFS, Samba, OpenSSH, vi, QEMU, IBM, FOSS,LPI, CDL, S/390, RHEL, SLES
This week I am in Chicago for the IBM Storage and Storage Networking Symposium, which coincides with the System x and BladeCenter Technical Conference. This allows the 800 attendees to attend both storage or server presentations at their convenience. There were hundreds of sessions, over 20 time slots, so for each time slot, you have 15 or so topics to choose from.Mike Kuhn kicked off the series of keynote sessions. Here's my quick recap of each one:
- Curtis Tearte, General Manager, IBM System Storage
Curtis replaced Andy Monshaw as General Manager for IBM System Storage. His presentation focused on how storage fits into IBM's Dynamic Infrastructure strategy. Some interesting points:
- a billion camera-enabled cell phones were sold in 2007, compared to 450 million in 2006.
- IBM expects that there will be 2 billion internet users by 2011, as well as trillions of "things".
- In the US, there were 2.2 million medical pharmacy dispensing errors resulting for handwritten prescriptions.
- Time wasted looking for parking spaces in Los Angeles consumed 47,000 gallons of gasoline, and generated 730 tons of carbon dioxide.
- In the US, 4.2 billion hours are lost, and 2.9 billion gallons of gas consumed, due to traffic congestion.
- Over the past decade, servers went from 8 watts to 100 watts per $1000 US dollars.
- Data growth appears immune to the economic recession. The digital footprint per person is expected to grow from 1TB today to over 15TB by 2020.
- 10 hours of YouTube videos are uploaded every minute.
- Bank of China manages 380 million bank accounts, processing over 10,000 transactions per second.
At the end of the session, Curtis transitioned from demonstrating his knowledge and passion of storage to his knowledge and passion in his favorite sport: baseball. Chicago is home to both the Cubs and the White Sox.
- Roland Hagan, Vice President Business Line Executive, System x
IBM sets the infrastructure agenda for the entire industry. The Dynamic Infrastructure initiative is not just IT, but a complete end-to-end view across all of the infrastructures in play, including transportation, manufacturing, services and facilities.Companies spent over $60 billion US dollars on servers last year. Of these, 53 percent for x86-based servers, 9 percent for Itanium-based, 26 percent for RISC-based (POWER6, SPARC, etc.), and 11 percent mainframe. Theeconomic downturn has impacted revenues, but the percentages continue about the same.
The dominant deployment model remains one application per server. As a result, power, cooling and management costs have grown tremendously. There are system admins opposed to consolidating server images with VMware, Hyper-V, Xen or other server virtualizaition technologies. Roland referred to these admins as "server huggers".To help clients adopt cloud computing technologies, IBM introduced [Cloudburst] appliances. IBM plans to offer specialized versions for developers, for service providers, and for enterprises.
IBM's Enterprise-X Architecture is what differentiates IBM's x86-based servers from all the competitors, surrounding Intel and AMD processors with technology that provides distinct advantages. For example, to support server virtualization, IBM's eX4 provides support for more memory, which often is more critical than CPU resources when deploying large number of guest OS images. IBM System x servers have an integrated management module (IMM) and was the first to change over from BIOS to the new Unified Extensible Firmware Interface [UEFI] standard.
IBM servers offer double the performance, consume half the power, and cost a third less to manage, than comparably priced servers from competitors. Of the top 20 more energy efficient server deployments, 19 are from IBM. Roland cited customer reference SciNet, a 4000-server supercomputer with 30,000 cores based on IBM [iDataPlex] servers. At 350 TeraFLOPs it is ranked #16 fastest supercomputer in the world, and #1 in Canada. With apower usage effectiveness (PUE) less than 1.2, it also is very energy efficient. This means that for every 12 watts of electricity going in to the data center, 10 watts are used for servers, storage and networking gear, andonly 2 watts used for power and cooling. Traditional data centers have PUE around 2.5, consuming 25 watts total for every 10 watts used by servers, storage and networking gear.
- Clod Barrera, Distinguished Engineer, Chief Technical Strategist for IBM System Storage
Clod presented trends and directions for disk and tape technology, disk and tape systems, and the direction towards cloud computing.
Whew! A lot to think about!
technorati tags: IBM, Chicago, Storage Symposium, System x, BladeCenter, Curtis Tearte, Roland Hagan,Andy Monshaw, baseball, Intel, AMD, IMM, UEFI, supercomputer, PUE, Clod Barrera, SciNet, Canada
Last week, Steve Jobs demonstrated the latest evidence that theinmates are running the asylum
over at Apple
I wasn't at the event, but thought it would be good to explain some basic concepts ofInformation Lifecycle Management (ILM),using the files on my iPod as an example. (Disclosure: IBM makes the technology inside many of Apple's computers, and so IBMers get to buy Appleproducts at employee prices. I own a Mac Mini based on IBM's POWER4 processor, and an iPod Photo 60GB model).
I have 20,000 MP3 music files, representing 106GB of data. This fits nicely on my 250GB external disk system attached to my Mac Mini, but won't all fit on my little 60GB iPod. I needed a way to decide what music I keep on bothmy iPod and Mac Mini, and which I keep only on my Mac Mini. When I am traveling, I am able to listen only to the musicin the first group, but when I am at home, I am able to listen to all my music in both groups.(Another disclosure: I use my Tivo connected to my LAN to play all my MP3 music through my home stereo system.I had my entire house wired with Cat5 to make this possible.)
Apple's iTunes software lets me decide which MP3 files are copied to my iPod using "playlists". A playlist is a list of songs. Fixed playlists are created manually, each song copied to its list in a specific order. Smart playlists are createdautomatically, via policy. I give it the criteria, and it finds the songs for me. If I import a new music CD,none of the songs will be added to any fixed playlists, but could be added to my smart playlists if I set the policiescorrectly. Apple iTunes supports both "include" and "exclude" methodologies.
I use primarily smart playlists, based on genre and rating. I have tried to keep the number of genre down to a small manageable list:
- Rhythm & Blues
- Hip Hop
Of course, what I have for genre may not match what's in theGracenote
database, so I sometimes have to makeupdates to match my convention. I've picked these based on my different "applications" for my music. For example, I listen to Ambient music to help me fall asleep on airplanes, but Rock when I exercise at the gym.
Next, I use the ratings from one to five stars. The advantage to the rating is that I can change them on-the-fly directly on my iPod. All other "metadata" has to be entered only from the keyboard of my Mac Mini.
|*||Files for Mac Mini only, not copied to my iPod|
|**||Non-mix, copied to my iPod, but typically spoken words, such as language lessons|
|***||Mix, music to include in my music mixes|
|****||Keep on my iPod, but re-evaluate|
So, I have five smart playlists, "One Star", "Two Stars", etc. for each rating, and have decidedto keep only the 2, 3, 4 and 5 star songs on my iPod, by simply putting check marks on those playlists to copythem over. I have about 50 songs with 5 stars, and 8000 with 3 stars, and the rest in the other categories,leaving me a few GB to spare.
I also have playlists for each genre, "Rock mix", "Pop Mix", "Ambient Mix", etc. where I have selected thosethat match the genre, AND have 3, 4 or 5 stars. In this manner, I can listen to a mix. If I find a song mis-classified for that genre, I change it to four stars, which serves as myreminder to re-evaluate when I am back at home on my Mac Mini. If I don't want a song in my mix, I just lowerit to 2 stars. I want it off my iPod altogether, I lower it to one star.
This method is simple enough, and allows me to enjoy my music right away, and more effectively, without having to wait for completely finishing my classification process.
Next week, I'm traveling to Africa (purely vacation, not related to my job, my senator, or myinvolvement in anycharitable organizations). My Canon camera has only a 1GB IBM Microdrive, but I am able to offloadmy pictures to my iPod, connected via USB cable, and review the pictures on the little 2-inch screen. By simply "unchecking" my 2-star and 3-starplaylists, and checking only those mixes I plan to take with me, I was able to clear 17GB of space, plenty ofroom for all my photos of elephants and giraffes, but still plenty of music to listen to. Thanks to my simple methodology, I was able to do this with minimal effort, and willhave no problem putting all my music back when I return.
When evaluating an ILM process, many people are overwhelmed by their fear of the classification process, when in reality it doesn't have to be so complicated.
Is there an "iTunes" for the storage in your datacenter? Yes! It's called IBM TotalStorage Productivity Center. It can help you list and classify all the files in your IT environment,including files in your internal disks inside the servers, your NAS and SAN external disk systems, across both IBM and non-IBM hardware.It's a good thing to consider as part of your overall ILM strategy.
technorati tags: Apple, Steve Jobs, inmates, running, asylum, IBM, information, lifecycle, management, iPod, music, genre, star, rating, iTunes, datacenter, TotalStorage, Productivity Center, NAS, SAN, ILM
Many people have asked me if there was any logic with the IBM naming convention of IBM Systems branded servers. Here's your quick and easy cheat sheet:
- System x -- "x" for cross-platform architecture. Technologies from our mainframe and UNIX servers were brought into chips that sit next to the Intel or AMD processors to provide a more reliable x86 server experience. For example, some models have a POWER processor-based Remote Supervisor Adapter (RSA).
- System p -- "p" for POWER architecture.
- System z -- "z" for Zero-downtime, zero-exposures. Our lawyers prefer "near-zero", but this is about as close as you get to ["six-nines" availability] in our industry, with the highest level of security and encryption, no other vendor comes close, so you get the idea.
But what about the "i" for System i? Officially, it stands for "Integrated" in that it could integrate different applications running on different operating systems onto a [COMMON
] platform. Options were available to insert Intel-based processor cards that ran Windows, or attach special cables that allowed separate System x servers running Windows to attach to a System i. Both allowed Windows applications to share the internal LAN and SAN inside the System i machine. Later, IBM allowed [AIX on System i
] and [Linux on Power
] operating systems to run as well.
From a storage perspective, we often joked that the "i" stood for "island", as most System i machines used internal disk, or attached externally to only a fewselected models of disk from IBM and EMC that had special support for i5/OS using a special, non-standard 520-byte disk block size. This meant only our popular IBM System Storage DS6000 and DS8000 series disk systems were available. This block size requirement only applies to disk. For tape, i5/OS supports both IBM TS1120 and LTO tape systems. For the most part,System i machines stood separate from the mainframe, and the rest of the Linux, UNIX and Windows distributed serverson the data center floor.
Often, when I am talking to customers, they ask when will product xyz be supported on System z or System i?I explained that IBM's strategy is not to make all storage devices connect via ESCON/FICON or support non-standard block sizes, but rather to get the servers to use standard 512-byte block size, Fibre Channel and other standard protocols.(The old adage applies: If you can't get Mohamed to move to the mountain, get the mountain to move to Mohamed).
On the System z mainframe, we are 60 percent there, allowing three of the five operating systems (z/VM, z/VSE and Linux) to access FCP-based disk and tape devices. (Four out of six if you include [OpenSolaris for the mainframe])But what about System i? As the characters on the popular television show [LOST] would say: It's time to get off the island!
Last week, IBM announced the new [i5/OS V6R1 operating system] with features that will greatly improve the use of external storage on this platform. Check this out:
- POWER6-based System i 570 model server
Our latest, most powerful POWER processor brought to the System i platform. The 570 model will be the first in the System i family of servers to make use of new processing technology, using up to 16 (sixteen!) POWER6 processors (running at 4.7GHZ) in each machine.The advantage of the new processors is the increased commercial processing workload (CPW) rating, 31 percent greater than the POWER5+ version and 72 percent greater than the POWER5 version. CPW is the "MIPS" or "TeraFlops" rating for comparing System i servers.Here is the[Announcement Letter].
- Fibre Channel Adapter for System i hardware
That's right, these are [Smart IOAs], so an I/O Processor (IOP) is no longer required! You can even boot the Initial Program Load (IPL) direclty from SAN-attached tape.This brings System i to the 21st century for Business Continuity options.
- Virtual I/O Server (VIOS)
[VirtualI/O Server] has been around for System p machines, but now available on System i as well. This allows multiplelogical partitions (LPARs) to access resources like Ethernet cards and FCP host bus adapters. In the case of storage, the VIOS handles the 520-byte to 512-byte conversion, so that i5/OS systems can now read and write to standard FCP devices like the IBM System Storage DS4800 and DS4700 disk systems.
- IBM System Storage DS4000 series
Initially, we have certified DS4700 and DS4800 disk systems to work with i5/OS, but more devices are in plan.This means that you can now share your DS4700 between i5/OS and your other Linux, UNIX and Windowsservers, take advantage of a mix of FC and SATA disk capacities, RAID6 protection, and so on.
- IBM PowerVM
To call [IBM PowerVM] the "VMware for the POWER architecture" would not do it quite justice. In combination with VIOS, IBM PowerVM is able to run a variety of AIX, Linux and i5/OS guest images.The "Live Partition Mobility" feature allows you to easily move guest images from one system to another, while they are running, just like VMotion for x86 machines.
And while we are on the topic of x86, PowerVM is also able to represent a Linux-x86 emulation base to run x86-compiled applications. While many Linux applications could be re-complied from source code for the POWER architecture "as is", others required perhaps 1-2 percent modification to port them over, and that was too much for some software development houses. Now, we can run most x86-compiled Linux application binaries in their original form on POWER architecture servers.
- BladeCenter JS22 Express
The POWER6-based [JS22 Express blade] can run i5/OS, taking advantage of PowerVM and VIOS to access all of the BladeCenterresources. The BladeCenter lets you mix and match POWER and x86-based blades in the same chassis, providing theultimate in flexibility.
Now that's exciting!
technorati tags: IBM, System x, System p, System i, System z, island, COMMON, AIX, Linux, POWER, POWER6, Windows, EMC, DS6000, DS8000, TS1120, LTO, ESCON, FICON, 520-byte, z/VM, z/VSE, z/OS, z/TPF, OpenSolaris, mainframe, LOST, CPW, x86, VMware, VMotion, BladeCenter, JS22, i5/OS, V6R1, PowerVM, VIOS, LPAR, DS4700, DS4800, LTO, disk, SAN, tape, storage
Dave Hitz from Network Appliance has a wonderful discussion of "branding": What do Marketing People Mean When They Say Brand?
A lot of people ask me about IBM branding, as we have recently changed brands. In the past we had two separate brands, one for servers (eServer) and one for storage (TotalStorage). These would be fine if we wanted to promote their independence, but customers today want synergy between servers and storage, they want systems that work well together.
Last year, in response to market feedback, we crated a new brand, "IBM Systems" and put all the server and storage product lines under one roof. Over time, we will transition from TotalStorage to System Storage naming. This will occur with new products, and major versions of existing products.
Two other phrases you will hear in the names of our offerings are "Virtualization Engine" and "Express". These are portfolio identifiers. The Virtualization Engine identifier was created to emphasize our leadership in system virtualization, and we have products that span product lines with this identifier.
The Express identifier was created to emphasize our focus on Small and Medium sized business (SMB). It spans not just servers and storage, but across other offerings from other IBM divisions.
Of course, just renaming products and services isn't enough. Systems don't work together just because they have similar names, are covered in similar "Apple white" plastic, or have similar black bezels. Obviously, thoughtful and collaborative design are needed, with the appropriate amounts of engineering and testing. IBM is aligning its server and storage development so that the IBM Systems brand keeps its promise.
technorati tags: Dave Hitz, NetApp, marketing, brand, TotalStorage, eServer, IBM Systems, Virtualization Engine, IBM, Express, SMB, Apple white, SMB
With price and joy, I shipped my baby off today. My "baby" in this case was an [XS School Server
]that I built and configured with software as a platform to developan [Educational Blogging System
] for[Proyecto Ceibal
] who are the "One Laptop Per Child" groupin Uruguay [OLPC Uruguay
(Earlier this year, I build a test XS School Server that was used to help and support [OLPC Nepal] by working with their local NGO team[OLE Nepal]. I wrote about this back in Februaryin my post [Understandingthe LAMP platform for Web 2.0 workloads].)
Based on this success, and perhaps because I am also fluent in Spanish, I was asked to help with Proyecto Ceibal, the team for OLPC Uruguay. Normally theXS school server resides at the school location itself, so that even if the internet connection is disrupted or limited, the school kids can continue to access each other and the web cache content until internet connection is resumed.However, with a diverse developmentteam with people in United States, Uruguay, and India, we first looked to Linux hosting providers that wouldagree to provide free or low-cost monthly access. We
spent (make that "wasted") the month of May investigating.Most that I talked to were not interested in having a customized Linux kernel on non-standard hardware on their shop floor, and wanted instead to offer their own standard Linux build on existing standard servers, managed by theirown system administrators, or were not interested in providing it for free. Since the XS-163 kernel is customizedfor the x86 architecture, it is one of those exceptions where we could not host it on an IBM POWER or mainframe as a virtual guest.
This got picked up as an [idea] for the Google's[Summer of Code] and we are mentoring Tarun, a 19-year-old student to actas lead software developer. However, summer was fast approaching, and we wanted this ready for the next semester. In June, our project leader, Greg, came up with a new plan. Build a machine and have it connected at an internet service provider that would cover the cost of bandwidth, and be willing to accept this with remote administration. We found a volunteer organization to cover this -- Thank you Glen and Vicki!
We found a location, so the request to me sounded simple enough: put together a PC from commodity parts that meet the requirements of the customizedLinux kernel, the latest release being called [XS-163]. The server would have two disk drives, three Ethernet ports, and 2GB of memory; and be installed with the customized XS-163 software, SSHD for remote administration, Apache web server, PostgreSQL database and PHP programming language.Of course, the team wanted this for as little cost as possible, and for me to document the process, so that it could be repeated elsewhere. Some stretch goals included having a dual-boot with Debian 4.0 Etch Linux for development/test purposes, an alternative database such as MySQL for testing, a backup procedure, and a Recover-DVD in case something goes wrong.
Some interesting things happened:
- The XS-163 is shipped as an ISO file representing a LiveCD bootable Linux that will wipe your system cleanand lay down the exact customized software for a one-drive, three-Ethernet-port server. Since it is based on Red Hat's Fedora 7 Linux base, I found it helpful to install that instead, and experiment moving sections of code over.This is similar to geneticists extracting the DNA from the cell of a pit bull and putting it into the cell for a poodle. I would not recommend this for anyone not familiar with Linux.
I also experimented with modifying the pre-built XS-163 CD image by cracking open the squashfs, hacking thecontents, and then putting it back together and burning a new CD. This provided some interesting insight, but in the end was able to do it all from the standard XS-163 image.
- Once I figured out the appropriate "scaffolding" required, I managed to proceed quickly, with running versionsof XS-163, plain vanilla Fedora 7, and Debian 4, in a multi-boot configuration.
- The BIOS "raid" capability was really more like BIOS-assisted RAID for Windows operating system drivers. This"fake raid" wasn't supported by Linux, so I used Linux's built-in "software raid" instead, which allowed somepartitions to be raid-mirrored, and other partitions to be un-mirrored. Why not mirror everything? With two160GB SATA drives, you have three choices:
- No RAID, for a total space of 320GB
- RAID everything, for a total space of 160GB
- Tiered information infrastructure, use RAID for some partitions, but not all.
The last approach made sense, as a lot of of the data is cache web page images, and is easily retrievable fromthe internet. This also allowed to have some "scratch space" for downloading large files and so on. For example,90GB mirrored that contained the OS images, settings and critical applications, and 70GB on each drive for scratchand web cache, results in a total of 230GB of disk space, which is 43 percent improvement over an all-RAID solution.
- While [Linux LVM2] provides software-based "storage virtualization" similar to the hardware-based IBM System Storage SAN Volume Controller (SVC), it was a bad idea putting different "root" directories of my many OS images on there. With Linux, as with mostoperating systems, it expects things to be in the same place where it last shutdown, but in a multi-boot environment, you might boot the first OS, move things around, and then when you try to boot second OS, it doesn'twork anymore, or corrupts what it does find, or hangs with a "kernel panic". In the end, I decided to use RAIDnon-LVM partitions for the root directories, and only use LVM2 for data that is not needed at boot time.
- While they are both Linux, Debian and Fedora were different enough to cause me headaches. Settings weredifferent, parameters were different, file directories were different. Not quite as religious as MacOS-versus-Windows,but you get the picture.
- During this time, the facility was out getting a domain name, IP address, subnet mask and so on, so I testedwith my internal 192.168.x.y and figured I would change this to whatever it should be the day I shipped the unit.(I'll find out next week if that was the right approach!)
- Afraid that something might go wrong while I am in Tokyo, Japan next week (July 7-11), or Mumbai, India the following week (July 14-18), I added a Secure Shell [SSH] daemon that runs automaticallyat boot time. This involves putting the public key on the server, and each remote admin has their own private key on their own client machine.I know all about public/private key pairs, as IBM is a leader in encryption technology, and was the first todeliver built-in encryption with the IBM System Storage TS1120 tape drive.
- To have users have access to all their files from any OS image required that I either (a) have identical copieseverywhere, or (b) have a shared partition. The latter turned out to be the best choice, with an LVM2 logical volumefor "/home" directory that is shared among all of the OS images. As we develop the application, we might findother directories that make sense to share as well.
- For developing across platforms, I wanted the Ethernet devices (eth0, eth1, and so on) match the actual ports they aresupposed to be connected to in a static IP configuration. Most people use DHCP so it doesn't matter, but the XSsoftware requires this, so it did. For example, "eth0" as the 1 Gbps port to the WAN, and "eth1/eth2" as the two 10/100 Mbps PCI NIC cards to other servers.Naming the internet interfaces to specific hardware ports wasdifferent on Fedora and Debian, but I got it working.
- While it was a stretch goal to develop a backup method, one that could perform Bare Machine Recovery frommedia burned by the DVD, it turned out I needed to do this anyways just to prevent me from losing my work in case thingswent wrong. I used an external USB drive to develop the process, and got everything to fit onto a single 4GB DVD. Using IBM Tivoli Storage Manager (TSM) for this seemed overkill, and [Mondo Rescue] didn't handle LVM2+RAID as well as I wanted, so I chose [partimage] instead, which backs up each primary partition, mirrored partition, or LVM2 logical volume, keeping all the time stamps, ownerships, and symbolic links in tact. It has the ability to chop up the output into fixed sized pieces, which is helpful if you are goingto burn them on 700MB CDs or 4.7GB DVDs. In my case, my FAT32-formatted external USB disk drive can't handle files bigger than 2GB, so this feature was helpful for that as well. I standardized to 660 GiB [about 692GB] per piece, sincethat met all criteria.
(The mainframe equivalent is DFSMShsm or DFSMSdss DUMP, which by the way can be used with Linux for System z DASD CKD partitions. See this helpful[HOWTO back up your Linux partitions and volumes through z/OS] guide.)
- The folks at [SysRescCD] saved the day. The standard "SysRescueCD" assigned eth0, eth1, and eth2 differently than the three base OS images, but the nice folks in France that write SysRescCD created a customized[kernel parameter that allowed the assignments to be fixed per MAC address ] in support of this project. With this in place, I was able to make a live Boot-CD that brings up SSH, with all the users, passwords,and Ethernet devices to match the hardware. Install this LiveCD as the "Rescue Image" on the hard disk itself, and also made a Recovery-DVD that boots up just like the Boot-CD, but contains the 4GB of backup files.
For testing, I used Linux's built-in Kernel-based Virtual Machine [KVM]which works like VMware, but is open source and included into the 2.6.20 kernels that I am using. IBM is the leadingreseller of Vmware and has been doing server virtualization for the past 40 years, so I am comfortable with thetechnology. The XS-163 platform with Apache and PostgreSQL servers as a platform for [Moodle], an open source class management system, and the combination is memory-intensive enough that I did not want to incur the overheads running production this manner, but it wasgreat for testing!
With all this in place, it is designed to not need a Linux system admin or XS-163/Moodle expert at the facility. Instead, all we need is someone to insert the Boot-CD or Recover-DVD and reboot the system if needed.
Just before packing up the unit for shipment, I changed the IP addresses to the values they need at the destination facility, updated the [GRUB boot loader] default, and made a final backup which burned the Recover-DVD. Hopefully, it works by just turning on the unit,[headless], without any keyboard, monitor or configuration required. Fingers crossed!
So, thanks to the rest of my team: Greg, Glen, Vicki, Tarun, Marcel, Pablo and Said. I am very excited to bepart of this, and look forward to seeing this become something remarkable!
technorati tags: XS School Server, Proyecto, Ceibal, OLPC, Uruguay, OLE, Nepal, LAMP, Web2.0, Google, Summer of Code, SSH, sshd, Apache, PostgreSQL, PHP, Red Hat, Fedora, Debian, Linux, Ethernet, BIOS, RAID, fakeraid, LiveCD, Boot-CD, Recover-DVD, DFSMS, DFSMShsm, DFSMSdss, DUMP, mainframe, LVM2, SVC, TSM, GRUB, Mondo Rescue, partimage, SysRescCD, KVM, GRUB
Jon Toigo has a funny cartoon on his post, [As I Listen to EMC Brag on “New” Functionality…
]. Basically, it pokes fun that many of us bloggers argue which vendor was first to introduce some technology or another. We all do this, myself included.
Recently, Claus Mikkelsen's, currently with HDS, [brought up accurately some past history from the 1990s], which is before many storage bloggers hired on with their current employers. Claus and I worked together for IBM back then, so I recognized many of the events he mentions that I can't talk about either. In many cases, IBM or HDS delivered new features before EMC.
I've been reading with some amusement as fellow blogger Barry Burke asked Claus a series of questions about Hitachi's latest High Availability Manager (HAM) feature. Claus was too busy with his "day job" and chose to shut Barry down. Sadly, HDS set themselves up for ridicule this round, first by over-hyping a function before its announcement, and then announcing a feature that IBM and EMC have offered for a while. The problem and confusion for many is that each vendor uses different terminology. Hitachi's HAM is similar to IBM's HyperSwap and EMC's AutoSwap. The implementations are different, of course, which is often why vendors are often asked to compare and contrast one implementation to another.
In his latest response,[how to mind the future of a mission-critical world], Barry reports that several HDS bloggers now censor his comments.That's too bad. I don't censor comments, within reason, including Barry's inane questions about IBM's products, and am glad that he does not censor my inane questions to him about EMC products in return. The entire blogosphere benefits from these exchanges, even if they are a bit heated sometimes.
We all have day jobs, and often are just too busy, or too lazy, to read dozens or hundreds of pages of materials, if we can even find them in the first place. Not everyone has the luxury of a "competitive marketing" team to help do the research for you, so if we can get an accurate answer or clarification about a product that is generally available directly from a vendor's subject matter expert, I am all for that.
technorati tags: IBM, Jon Toigo, HDS, Claus Mikkelsen, EMC, Barry Burke, HAM