Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Continuing my coverage of the [Data Center 2010 conference], Tuesday afternoon I presented "Choosing the Right Storage for your Server Virtualization". In 2008 and 2009, I attended this conference as a blogger only, but this time I was also a presenter.
The conference asked vendors to condense their presentations down to 20 minutes. I am sure this was inspired by the popular 18-minute lectures from the [TED conference] or perhaps the [Pecha Kucha] night gatherings in Japan where each presenter speaks while showing 20 slides for 20 seconds each, This forces the presenters to focus on their key points and not fill the time slot with unnecessary marketing fluff. This also allows more vendors to have a chance to pitch their point of view.
This is my final post on my coverage of the 30th annual [Data Center Conference]. IBM was a Platinum sponsor, and there were over 2,600 attendees, of which 27 percent were IT Directors or higher. Two thirds of the companies have 5000 employees or more. Here is a recap of the last few sessions I attended.
Best Practices for Data Center consolidation
As if the conference co-chairs aren't already super-busy, here they are presenting one of the breakout sessions. In the 1990s, consolidation was done purely to reduce total cost of ownership (TCO). Today, there are a variety of other reasons, including issues with power and cooling, service level agreements, and security.
Of these, 25 percent plan to have more data centers in three years, and 47 percent plan to consolidate to fewer. The benefits to consolidation include economies of scale, staff reduction, reduced hardware facilities costs, and application retirement. Challenges include dealing with politics, building new facilities to replace the old ones, and bandwidth. Here were some of the primary reasons why data center consolidation projects fail:
Human Resources (HR) issues
Resources not freed available
Lack of Project Management skills
No rationalization at consolidated site
Interactive Polling Results
The last keynote session was Thursday morning. The conference co-chairs present the highlights of the interactive polling that was done during the week at this conference.
The first topic was social media. There was a lot of Twitter activity with hashtag #GartnerDC that I followed throughout the week. Most of the tweets seem to be from people who were not actually at the conference.
Some 45 percent of the attendees have implemented social media initiatives at their companies. What tooling are they using to accomplish this? There are some provided by the major ITSM vendors, tools specific for corporate social media such as Yammer, collaboration tools like Microsoft SharePoint and IBM's Lotus Connections, and public sites like Facebook and Twitter. Here were the poll results:
The next topic was focused on Mobile devices and Cloud Computing. For example, do companies store data in public cloud, or plan to in the future, for mobile devices?
One third of the attendees allow employees to bring their own tablet to work with full IT support. Only 18 percent allow employees to bring their own PC or laptop. Over 40 percent felt that their IT department was not yet ready to support smartphones.
What are the main drivers to adopt private cloud? Some are deploying private clouds as a way to defend their IT jobs from going to the public cloud. Here were the poll results:
What problems are companies trying to solve with cloud computing? Here were the poll results:
A majority of attendees that use VMware are exploring LInux KVM, such as Red Hat Enterprise Virtualization (RHEV) or Microsfot Hyper-V. What storage protocol are attendees using for their server virtualization? Here were the poll results:
The next topic was the process for IT service management. The top three were ITIL, CMMI and DevOps, with the majority using ITIL or ITIL in combination with something else. These are needed for release management, change management, performance management, capacity management and incident management. How collaborative is the relationship between IT operations and application development? Here were the poll results:
How well does IT operations contribute to business innovation? This year 38 percent were satisfied, and 33 percent unsatisfied. This was a big improvement over last year, that found 19 percent satisfied, 64 percent unsatisfied.
Building a Private Storage Cloud: Is It a Science Experiment?
While everyone understands the benefits of private and public cloud computing, there seems to be hesitation about hosted cloud storage. Some people have already adopted some form of cloud storage, and other plan to within 12 months. Here were the poll results:
The top three reasons for considering public cloud storage was to adopt lower-cost storage tier, to benefit from off-site storage, and staff constraints. The top concerns were security and performance.
The IT department will need to start thinking like a cloud provider, and perhaps adopt a hybrid cloud approach. What IT equipment can be re-used? What will the new IT operations look like in a Cloud environment? What were the primary use cases for cloud storage? Here were the poll results:
In addition to the major cloud providers (IBM, Amazon, etc.) there are a variety of new cloud storage startups to address these business needs.
So that wraps up my coverage of this conference. In addition to attending great keynote and breakout sessions, I was able to have great one-on-one discussions with clients at the Solution Showcase booth, during breaks and at meals. IBM's focus on Big Data, Workload-optimized Systems, and Cloud seems to resonate well with the analysts and attendees. I want to give special thinks to Lynda, Dana, Peggy, Hugo, David, Rick, Cris, Richard, Denise, Chloe, and all my colleagues, friends and family from Arizona for their support!
Well, it's Wednesday, and you know what that means... IBM Announcements!
(Actually most IBM announcements are on Tuesdays, but IBM gave me extra time to recover from my trip to Europe!)
Today, IBM announced [IBM PureSystems], a new family of expert-integrated systems that combine storage, servers, networking, and software, based on IBM's decades of experience in the IT industry. You can register for the [Launch Event] today (April 11) at 2pm EDT, and download the companion "Integrated Expertise" event app for Apple, Android or Blackberry smartphones.
(If you are thinking, "Hey, wait a minute, hasn't this been done before?" you are not alone. Yes, IBM introduced the System/360 back in 1964, and the AS/400 back in 1988, so today's announcement is on scheduled for this 24-year cycle. Based on IBM's past success in this area, others have followed, most recently, Oracle, HP and Cisco.)
Initially, there are two offerings:
IBM PureFlex™ System
IBM PureFlex is like IaaS-in-a-box, allowing you to manage the system as a pool of virtual resources. It can be used for private cloud deployments, hybrid cloud deployments, or by service providers to offer public cloud solutions. IBM drinks its own champagne, and will have no problem integrating these into its [IBM SmartCloud] offerings.
To simplify ordering, the IBM PureFlex comes in three tee-shirt sizes: Express, Standard and Enterprise.
IBM PureFlex is based on a 10U-high, 19-inch wide, standard rack-mountable chassis that holds 14 bays, organized in a 7 by 2 matrix. Unlike BladeCenter where blades are inserted vertically, the IBM PureFlex nodes are horizontal. Some of the nodes take up a single bay (half-wide), but a few are full-wide, take up two bays, the full 19-inch width of the chassis. Compute and storage snap in the front, while power supplies, fans, and networking snap in the back. You can fit up to four chassis in a standard 42U rack.
Unlike competitive offerings, IBM does not limit you to x86 architectures. Both x86 and POWER-based compute nodes can be mixed into a single chassis. Out of the box, the IBM PureFlex supports four operating systems (AIX, IBM i, Linux and Windows), four server hypervisors (Hyper-V, Linux KVM, PowerVM, and VMware), and two storage hypervisors (SAN Volume Controller and Storwize V7000).
There are a variety of storage options for this. IBM will offer SSD and HDD inside the compute nodes themselves, direct-attached storage nodes, and an integrated version of the Storwize V7000 disk system. Of course, every IBM System Storage product is supported as external storage. Since Storwize V7000 and SAN Volume Controller support external virtualization, many non-IBM devices will be supported automatically as well.
Networking is also optimized, with options for 10Gb and 40Gb Ethernet/FCoE, 40Gb and 56Gb Infiniband, 8Gbps and 16Gbps Fibre Channel. Much of the networking traffic can be handled within the chassis, to minimize traffic on external switches and directors.
For management, IBM offers the Flex System Manager, that allows you to manage all the resources from a single pane of glass. The goal is to greatly simplify the IT lifecycle experience of procurement, installation, deployment and maintenance.
IBM PureApplication™ System
IBM PureApplication is like PaaS-in-a-box. Based on the IBM PureFlex infrastructure, the IBM PureApplication adds additional software layers focused on transactional web, business logic, and database workloads. Initially, it will offer two platforms: Linux platform based on x86 processors, Linux KVM and Red Hat Enterprise Linux (RHEL); and a UNIX platform based on POWER7 processors, PowerVM and AIX operating system. It will be offered in four tee-shirt sizes (small, medium, large and extra large).
In addition to having IBM's middleware like DB2 and WebSphere optimized for this platform, over 600 companies will announce this week that they will support and participate in the IBM PureSystems ecosystem as well. Already, there are 150 "Patterns of Expertise" ready to deploy from IBM PureSystem Centre, a kind of a "data center app store", borrowing an idea used today with smartphones.
By packaging applications in this manner, workloads can easily shift between private, hybrid and public clouds.
If you are unhappy with the inflexibility of your VCE Vblock, HP Integrity, or Oracle ExaLogic, talk to your local IBM Business Partner or Sales Representative. We might be able to buy your boat anchor off your hands, as part of an IBM PureSystems sale, with an attractive IBM Global Financing plan.
This week, I am in Taipei, teaching Top Gun class. There was concern that another typhoon would hit the island of Taiwan later this week, but it looks like it is now headed for Hong Kong instead.
Elsewhere in the world, there are several events going on next week, so I thought I would bring them to your attention.
ECTY - South Africa
Next week, Jerry Kluck, IBM Global Sales Executive for Storage Optimization and Integration Services, will be the keynote speaker at "Edge Comes to You" (ECTY) conference in South Africa. This is a one-day event, similar to the [ECTY event in Moscow, Russia] that I spoke at last June.
Here is the schedule for South Africa next week:
Monday, August 20, 2012 - Johannesburg
Wednesday, August 22, 2012 - Cape Town
(I have been to both Jo'burg and Cape Town back in 1994. A month after Apartheid had just ended, I was part of a small group of IBMers sent to re-establish IBM's business operations there. I would have liked to have attended the events next week, not just to hear Jerry speak, but also to see how much the country has changed over the past 18 years, but I could not get a work permit in time.)
If you are interested in attending either of these next week, contact your local IBM Business Partner or sales rep to attend.
Forrester's Total Economic Impact Study of Virtualized Storage
Virtualized storage can help organizations stretch their storage investment dollar and storage administration and management resources. Jon Erickson from Forrester Research will review the latest findings from IBM SAN Volume Control (SVC) users studied as part of the recently completed Forrester Total Economic Impact Study of IBM System Storage SAN Volume Controller.
Date: Tuesday, August 21, 2012
Time: 10:00 AM PDT / 1:00 PM EDT
Duration: 60 minutes
Among the findings, users were able to:
Avoid the capital cost of additional storage
Increase IT productivity
Provide greater end user data availability
The second presenter is Chris Saul, IBM Storage Virtualization Manager, who will explain how SVC can manage heterogeneous disk from a single point of control, autonomously manage tiered disk storage and can store up to five times as much data on your existing disk using IBM Real-time Compression.
Not all virtualization solutions are created equal! That's true for storage virtualization, like the SAN Volume Controller mentioned above, and it's true for server virtualization as well.
This webcast discusses the real-world impact on businesses that deploy IBM's PowerVM®
virtualization technology as compared to those using Oracle® VM for SPARC (OVM SPARC), Microsoft® Hyper-V, VMware® vSphere or other competing products.
Date: Wednesday, August 22, 2012
Time: 10:00 AM PDT / 1:00 PM EDT
Duration: 60 minutes
This webcast will include findings from a [Solitaire Interglobal] study of over 61,000 customer sites on the value of virtualization from a business perspective and how IBM's PowerVM provides real business value.
Other key discussion points that will be covered during this webcast include:
Behavioral characteristics of server virtualization technologies that were examined and analyzed from survey participant's environments
How IT colleagues were able to obtain a faster time-to-market for business initiatives when using IBM PowerVM
Why the learning curve time for PowerVM is as much as 2.58 times faster than for other offerings
Why VM reboot comparisons for PowerVM vs competitive platforms resulted in downtime of 5.5 times less than with other options
A TCO reduction of up to 71.4% for PowerVM compared to alternative options
This webcast will also feature an in-depth discussion on the IBM PowerVM solution from an IBM product expert who will share the unique virtualization features available when PowerVM is utilized within the IBM Power Systems™ environment.
Next week is [VMworld 2010], so I thought today would be a good day to write a blog post about reporting and managing virtual guest images.
As the original lead architect for IBM Tivoli Storage Productivity Center, I am no stranger to reporting and management tools. Needless to say, if you have lots of virtual guest images, it makes sense to deploy reporting and management software. I had never heard of Veeam before, but I decided to check out Veeam Reporter 4.0, an enterprise-level reporting solution specifically designed for large Virtual Infrastructure (VI3) and vSphere virtual environments that allows you to automatically discover and collect information about your VMware virtual environment.
Their 90-page User Guide offered these helpful "First Steps" on page 9 which I used as the master plan for my evaluation.
Install Veeam Reporter 4.0
The instructions appeared fairly straightforward: Download [the latest version] of the application. Unpack the downloaded archive and run the VeeamReporter.exe file. Then follow the installation wizard steps. What could go wrong?
I should have known better. Like IBM Tivoli Storage Productivity Center, Veeam Reporter is designed to be installed on its own server-class machine with its own application web server and database. I wasn't going to stand up a new server in our lab just for this contest, so I decided to just install it on my Windows XP SP3, which Veeam had listed as a supported operating system level. I ran into a series of installation issues, including installing IIS, installing SQL server, and installing the SRSS component. I am more familiar with IBM's WebSphere Application Server and DB2 combination used in IBM's own products, and have experience with Apache and MySQL on a standard LAMP stack, so my lack of experience with IIS and SQL server made the installation more difficult. Many thanks to all the support personnel at Veeam, Microsoft, and my internal IT department to finally get all of this working.
It appears you can set this up as a client/server environment, where the Veeam Reporter server runs IIS and SQL Server, and then you have a browser on your client machine point to that server. In my cases, I have client browser and server all on one machine.
Create and run a collection job
This step also seemed fairly standard for reporting tools. Once you launch Veeam Reporter 4.0 for the first time, you need to retrieve data from your virtual infrastructure to be able to generate reports. To start the created collection job, select it and click the Start button on the toolbar. If you have a vCenter server in your VI environment, we recommend that you create a job for it to immediately collect data for all objects in its hierarchy. After that, you will be able to select VI objects that were engaged in the performed job using the Workspace, and generate reports for it.
I signed up for this contest August 7, but step 1 above took me two weeks to resolve all the installation iissues. I wanted to get my blog post entry for the contest BEFORE the start of VMworld. Since I am in Dallas, Texas this week for the IBM Storage Solutions University, I had to go through several firewalls for my laptop to tunnel through and get to my VMware Center back in Tucson.
Click on the graphic above to see larger view.
I was able to create and run a collection job. I have a WMware ESX 3.5 host running five guest images and 14 datastores. This seemed to be enough to evaluate the basic features of this reporting tool. Veeam Reporter let's you run the collection process manually, or set a "periodic" schedule to collect data every hour.
Generate reports manually or create a reporting job
Finally, I get to the fun part: To generate report manually, click the Workspace tab, select a necessary VI object from the tree view, date and collection job session, choose reports and click the Create Report button.
At this point, I am reminded of a famous poem:
To see a world in a grain of sand
And a heaven in a wild flower,
Hold infinity in the palm of your hand
And eternity in an hour.
- William Blake
When evaluating products, try to imagine what the reports would look like with hundreds of virtual guest images. Certainly, I can see some potential, even though I had rather limited data to work with. In theory, the tool can create Visio output files, but you need to have Microsoft Visio installed. I have only "Visio Viewer" so I was unable to create any visio files with this product.
The reports can be exported to PDF, Word or Excel formats. Here is an example of an Excel spreadsheet export. While it has 14 bars for the 14 datastores, there are no labels, and the misleading details link in the lower right corner is non-functional. The only way for me to figure out what each referred to was to go back to my vCenter client, which kind of defeats the purpose of having a separate reporting tool.
This same report exported to PDF spanned across four pages, leaving the re-assembly to be done with a pair of scissors and celophane tape.
When you create reports, you can use SRSS or Veeam's internal proprietary format. Only SRSS reports can be put on the dashboard, so I recommend that.
Customize your dashboard
The fourth and final step is to configure your own dashboard: To add reports to the Dashboard, you should first create and save them using Workspace of Veeam Reporter 4.0. Keep in mind that you can add to the Dashboard only saved SSRS-based reports. To customize the Dashboard, click the Dashboard tab and then click the Edit Dashboard button. Customize the layout by dragging blue borders from the right and the bottom of the screen. Then, drag reports from the Reports list and drop them onto the created cells.
The "Free Edition" only allows you to put a single report on the dashboard, so as in step 3, you have to use your imagination of what the potential of the full license would looke like with multiple reports are on a single pane of glass.
(FTC Disclosure: I work for IBM, the leader in server virtualization worldwide, and the number #1 reseller of VMware. In this post, I review [Veeam Reporter 4.0] as my official entry for their blogging contest. IBM and Veeam do not have any business relationshiop that I know of, other than both being VMware business partners, so I am treating them here as an Independent Software Vendor (ISV). Veeam has not compensated me in any manner for this review, this review is not to be taken as an endorsement of Veeam or its products, and I was not provided any full or evaluator license keys. The review is based entirely on my experience using the "Free Edition" available to all for download. None of this blog post was pre-reviewed by anyone from Veeam. IBM, of course, also offers similar software, which I mention below for comparison purposes.)
At this point, you might be thinking, "Doesn't IBM offer something like this?" Of course it does! IBM is the leader in infrastructure reporting, monitoring and management software. Last October, [IBM unveiled IBM Systems Director VMcontrol] software. Not only does IBM Systems Director VMcontrol provide similar support for your VMware environment, it also manages Microsoft Hyper-V and Xen deployments, PowerVM on POWER-based serves, and even z/VM guest images on the System z mainframes. Combined with the rest of the IBM Systems Director, you can manage all of your physical and virtual servers with a single tool from a single pane of glass. How cool is that?
I would like to think Doug Hazelman, Senior Director of Product Strategy at Veeam, for organizing this awesome blogging contest. If you liked this blog post, click here to [vote for me] to get counted for this contest.
It's Tuesday, and that means more IBM announcements!
I haven't even finished blogging about all the other stuff that got announced last week, and here we are with more announcements. Since IBM's big [Pulse 2010 Conference] is next week, I thought I would cover this week's announcement on Tivoli Storage Manager (TSM) v6.2 release. Here are the highlights:
Client-Side Data Deduplication
This is sometimes referred to as "source-side" deduplication, as storage admins can get confused on which servers are clients in a TSM client-server deployment. The idea is to identify duplicates at the TSM client node, before sending to the TSM server. This is done at the block level, so even files that are similar but not identical, such as slight variations from a master copy, can benefit. The dedupe process is based on a shared index across all clients, and the TSM server, so if you have a file that is similar to a file on a different node, the duplicate blocks that are identical in both would be deduplicated.
This feature is available for both backup and archive data, and can also be useful for archives using the IBM System Storage Archive Manager (SSAM) v6.2 interface.
Simplified management of Server virtualization
TSM 6.2 improves its support of VMware guests by adding auto-discovery. Now, when you spontaneously create a new virtual machine OS guest image, you won't have to tell TSM, it will discover this automatically! TSM's legendary support of VMware Consolidated Backup (VCB) now eliminates the manual process of keeping track of guest images. TSM also added support of the Vstorage API for file level backup and recovery.
While IBM is the #1 reseller of VMware, we also support other forms of server virtualization. In this release, IBM adds support for Microsoft Hyper-V, including support using Microsoft's Volume Shadow Copy Services (VSS).
Automated Client Deployment
Do you have clients at all different levels of TSM backup-archive client code deployed all over the place? TSM v6.2 can upgrade these clients up to the latest client level automatically, using push technology, from any client running v5.4 and above. This can be scheduled so that only certain clients are upgraded at a time.
Simultaneous Background Tasks
The TSM server has many background administrative tasks:
Migration of data from one storage pool to another, based on policies, such as moving backups and archives on a disk pool over to a tape pools to make room for new incoming data.
Storage pool backup, typically data on a disk pool is copied to a tape pool to be kept off-site.
Copy active data. In TSM terminology, if you have multiple backup versions, the most recent version is called the active version, and the older versions are called inactive. TSM can copy just the active versions to a separate, smaller disk pool.
In previous releases, these were done one at a time, so it could make for a long service window. With TSM v6.2, these three tasks are now run simultaneously, in parallel, so that they all get done in less time, greatly reducing the server maintenance window, and freeing up tape drives for incoming backup and archive data. Often, the same file on a disk pool is going to be processed by two or more of these scheduled tasks, so it makes sense to read it once and do all the copies and migrations at one time while the data is in buffer memory.
Enhanced Security during Data Transmission
Previous releases of TSM offered secure in-flight transmission of data for Windows and AIX clients. This security uses Secure Socket Layer (SSL) with 256-bit AES encryption. With TSM v6.2, this feature is expanded to support Linux, HP-UX and Solaris.
Improved support for Enterprise Resource Planning (ERP) applications
I remember back when we used to call these TDPs (Tivoli Data Protectors). TSM for ERP allows backup of ERP applications, seemlessly integrating with database-specific tools like IBM DB2, Oracle RMAN, and SAP BR*Tools. This allows one-to-many and many-to-one configurations between SAP servers and TSM servers. In other words, you can have one SAP server backup to several TSM servers, or several SAP servers backup to a single TSM server. This is done by splitting up data bases into "sub-database objects", and then process each object separately. This can be extremely helpful if you have databases over 1TB in size. In the event that backing up an object fails and has to be re-started, it does not impact the backup of the other objects.