Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
IBM had over a dozen storage-related announcements this week. This is my third and final part in my series to provide a quick overview of the announcements.
IBM Tivoli® Storage Manager v6.3
IBM Tivoli Storage Manager is market-leading software that provides not just backup, but also HSM and archive capabilities across a wide variety of operating systems. Originally developed in the IBM Almaden Research Center, it then moved about 15 years ago to Tucson to become a commercial product.
The new TSM v6.3 introduces site-to-site hot-standby disaster recovery feature that replicates the TSM meta data and data for fast recovery. The maximum number of objects supported has doubled to four billion. Reporting has been enhanced using technologies borrowed from IBM Cognos. Lastly, a feature on Tivoli Storage Productivity Center has been carried forward to deploy and update agents on the various clients.
IBM Tivoli Storage FlashCopy Manager coordinates application-aware backups through the use of point-in-time copy services such as FlashCopy or Snapshot on various IBM and non-IBM disk systems. The versions can remain on disk, or optionally processed by Tivoli Storage Manager to move them to external storage such as tape for added protection.
There will always be a spot in my heart for this product, as the method to use FlashCopy for application-aware backups on the mainframe was my 19th patent, and subsequently delivered as a series of enhancements to DFSMS over the past decade on the z/OS operating system. It is good to see this innovation has "jumped over" to distributed systems.
The new FlashCopy Manager v3.1 adds support for HP-UX and VMware, expands support for IBM DB2 and Oraqcle databases, and introduces an interface for custom business applications.
IBM Tivoli Storage Manager for Virtual Environments v6.3
TSM for VE is a new addition to the TSM family, focused on being able to coordinate hypervisor-aware data protection. Initially it supports VMware, but IBM has plans to support a variety of other server virtualization hypervisors as well, as over 40 percent of companies run two or more hypervisors in their data center.
The new TSM for VE v6.3 adds a VMware vCenter plug-in, and support for hardware-based disk snapshots.
IBM Tivoli Storage Productivity Center v4.2.2
A long time ago, I was the chief architect IBM Tivoli Storage Productivity Center v1, now we are already up to v4.2.2 release!
IBM has added enhanced reporting based on IBM Cognos technology, including storage tiering analysis reports (STAR). Few companies keep all of their storage tiers in a single disk system. Rather, they have different boxes, and often from different vendors. IBM's Productivity Center can report on both IBM and non-IBM disk systems. New this release is support for the internal disks of the Storwize V7000 midrange disk system.
Productivity Center's "SAN Planner" has been enhanced to consider XIV replication criteria. This SAN Planner helps clients decide where to carve LUNs, and to make sure they pick the right place given all of the criteria such as remote copy replications.
Last year, we introduced Productivity Center for Disk Midrange Edition (MRE) which to offer lower price when you are only managing midrange disk systems DS5000, DS3000, Storwize V7000 and SVC managing these. This was so successful, that we now have TPC Select, which is basically Productivity Center Standard Edition (SE) for these midrange disk systems.
Whew! I have already heard from some of my readers to slow down, that this is too much information to deal with all at once. IBM has tried everything from having just a few announcements nearly every Tuesday, to having huge launches every two to three years, and settled in the middle with announcements about four to five times per year.
By combining multiple components into a single "integrated system", IBM can offer a blended disk-and-tape storage solutions. This provides the best of both worlds, high speed access using disk, while providing lower costs and more energy efficiency with tape. According to a study by the Clipper Group, tape can be 23 times less expensive than disk over a 5 year total cost of ownership (TCO).
I've also covered Hierarchical Storage Management, such as my post [Seven Tiers of Storage at ABN Amro], and my role as lead architect for DFSMS on z/OS in general, and DFSMShsm in particular.
However, some explanation might be warranted in the use of these two terms in regards to SONAS. In this case, ILM refers to policy-based file placement, movement and expiration on internal disk pools. This is actually a GPFS feature that has existed for some time, and was tested to work in this new configuration. Files can be individually placed on either SAS (15K RPM) or SATA (7200 RPM) drives. Policies can be written to move them from SAS to SATA based on size, age and days non-referenced.
HSM is also a form of ILM, in that it moves data from SONAS disk to external storage pools managed by IBM Tivoli Storage Manager. A small stub is left behind in the GPFS file system indicating the file has been "migrated". Any reference to read or update this file will cause the file to be "recalled" back from TSM to SONAS for processing. The external storage pools can be disk, tape or any other media supported by TSM. Some estimate that as much as 60 to 80 percent of files on NAS have low reference and should be stored on tape instead of disk, and now SONAS with HSM makes that possible.
This distinction allows the ILM movement to be done internally, within GPFS, and the HSM movement to be done externally, via TSM. Both ILM and HSM movement take advantage of the GPFS high-speed policy engine, which can process 10 million files per node, run in parallel across all interface nodes. Note that TSM is not required for ILM movement. In effect, SONAS brings the policy-based management features of DFSMS for z/OS mainframe to all the rest of the operating systems that access SONAS.
HTTP and NIS support
In addition to NFS v2, NFS v3, and CIFS, the SONAS v1.1.1 adds the HTTP protocol. Over time, IBM plans to add more protocols in subsequent releases. Let me know which protocols you are interested in, so I can pass that along to the architects designing future releases!
SONAS v1.1.1 also adds support for Network Information Service (NIS), a client/server based model for user administration. In SONAS, NIS is used for netgroup and ID mapping only. Authentication is done via Active Directory, LDAP or Samba PDC.
SONAS already had synchronous replication, which was limited in distance. Now, SONAS v1.1.1 provides asynchronous replication, using rsync, at the file level. This is done over Wide Area Network (WAN) across to any other SONAS at any distance.
Interface modules can now be configured with either 64GB or 128GB of cache. Storage now supports both 450GB and 600GB SAS (15K RPM) and both 1TB and 2TB SATA (7200 RPM) drives. However, at this time, an entire 60-drive drawer must be either all one type of SAS or all one type of SATA. I have been pushing the architects to allow each 10-pack RAID rank to be independently selectable. For now, a storage pod can have 240 drives, 60 drives of each type of disk, to provide four different tiers of storage. You can have up to 30 storage pods per SONAS, for a total of 7200 drives.
An alternative to internal drawers of disk is a new "Gateway" iRPQ that allows the two storage nodes of a SONAS storage pod to connect via Fibre Channel to one or two XIV disk systems. You cannot mix and match, a storage pod is either all internal disk, or all external XIV. A SONAS gateway combined with external XIV is referred to as a "Smart Business Storage Cloud" (SBSC), which can be configured off premises and managed by third-party personnel so your IT staff can focus on other things.
See the Announcement Letters for the SONAS [hardware] and [software] for more details.
For those who are wondering how this positions against IBM's other NAS solution, the IBM System Storage N series, the rule of thumb is simple. If your capacity needs can be satisfied with a single N series box per location, use that. If not, consider SONAS instead. For those with non-IBM NAS filers that realize now that SONAS is a better approach, IBM offers migration services.
Both the Information Archive and the SONAS can be accessed from z/OS or Linux on System z mainframe, from "IBM i", AIX and Linux on POWER systems, all x86-based operating systems that run on System x servers, as well as any non-IBM server that has a supported NAS client.