Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Wrapping up my coverage of the annual [2010 System Storage Technical University], I attended what might be perhaps the best session of the conference. Jim Nolting, IBM Semiconductor Manufacturing Engineer, presented the new IBM zEnterprise mainframe, "A New Dimension in Computing", under the Federal track.
The zEnterprises debunks the "one processor fits all" myth. For some I/O-intensive workloads, the mainframe continues to be the most cost-effective platform. However, there are other workloads where a memory-rich Intel or AMD x86 instance might be the best fit, and yet other workloads where the high number of parallel threads of reduced instruction set computing [RISC] such as IBM's POWER7 processor is more cost-effective. The IBM zEnterprise combines all three processor types into a single system, so that you can now run each workload on the processor that is optimized for that workload.
IBM zEnterprise z196 Central Processing Complex (CPC)
Let's start with the new mainframe z196 central processing complex (CPC). Many thought this would be called the z11, but that didn't happen. Basically, the z196 machine has a maximum 96 cores versus z10's 64 core maximum, and each core runs 5.2GHz instead of z10's cores running at 4.7GHz. It is available in air-cooled and water-cooled models. The primary operating system that runs on this is called "z/OS", which when used with its integrated UNIX System Services subsystem, is fully UNIX-certified. The z196 server can also run z/VM, z/VSE, z/TPF and Linux on z, which is just Linux recompiled for the z/Architecture chip set. In my June 2008 post [Yes, Jon, there is a mainframe that can help replace 1500 servers], I mentioned the z10 mainframe had a top speed of nearly 30,000 MIPS (Million Instructions per Second). The new z196 machine can do 50,000 MIPS, a 60 percent increase!
The z196 runs a hypervisor called PR/SM that allows the box to be divided into dozens of logical partitions (LPAR), and the z/VM operating system can also act as a hypervisor running hundreds or thousands of guest OS images. Each core can be assigned a specialty engine "personality": GP for general processor, IFL for z/VM and Linux, zAAP for Java and XML processing, and zIIP for database, communications and remote disk mirroring. Like the z9 and z10, the z196 can attach to external disk and tape storage via ESCON, FICON or FCP protocols, and through NFS via 1GbE and 10GbE Ethernet.
IBM zEnterprise BladeCenter Extension (zBX)
There is a new frame called the zBX that basically holds two IBM BladeCenter chassis, each capable of 14 blades, so total of 28 blades per zBX frame. For now, only select blade servers are supported inside, but IBM plans to expand this to include more as testing continues. The POWER-based blades can run native AIX, IBM's other UNIX operating system, and the x86-based blades can run Linux-x86 workloads, for example. Each of these blade servers can run a single OS natively, or run a hypervisor to have multiple guest OS images. IBM plans to look into running other POWER and x86-based operating systems in the future.
If you are already familiar with IBM's BladeCenter, then you can skip this paragraph. Basically, you have a chassis that holds 14 blades connected to a "mid-plane". On the back of the chassis, you have hot-swappable modules that snap into the other side of the mid-plane. There are modules for FCP, FCoE and Ethernet connectivity, which allows blades to talk to each other, as well as external storage. BladeCenter Management modules serve as both the service processor as well as the keyboard, video and mouse Local Console Manager (LCM). All of the IBM storage options available to IBM BladeCenter apply to zBX as well.
Besides general purpose blades, IBM will offer "accelerator" blades that will offload work from the z196. For example, let's say an OLAP-style query is issued via SQL to DB2 on z/OS. In the process of parsing the complicated query, it creates a Materialized Query Table (MQT) to temporarily hold some data. This MQT contains just the columnar data required, which can then be transferred to a set of blade servers known as the Smart Analytics Optimizer (SAO), then processes the request and sends the results back. The Smart Analytics Optimizer comes in various sizes, from small (7 blades) to extra large (56 blades, 28 in each of two zBX frames). A 14-blade configuration can hold about 1TB of compressed DB2 data in memory for processing.
IBM zEnterprise Unified Resource Manager
You can have up to eight z196 machines and up to four zBX frames connected together into a monstrously large system. There are two internal networks. The Inter-ensemble data network (IEDN) is a 10GbE that connects all the OS images together, and can be further subdivided into separate virtual LANs (VLAN). The Inter-node management network (INMN) is a 1000 Mbps Base-T Ethernet that connects all the host servers together to be managed under a single pane of glass known as the Unified Resource Manager. It is based on IBM Systems Director.
By integrating service management, the Unified Resource Manager can handle Operations, Energy Management, Hypervisor Management, Virtual Server Lifecycle Management, Platform Performance Management, and Network Management, all from one place.
IBM Rational Developer for System z Unit Test (RDz)
But what about developers and testers, such as those Independent Software Vendors (ISV) that produce mainframe software. How can IBM make their lives easier?
Phil Smith on z/Journal provides a history of [IBM Mainframe Emulation]. Back in 2007, three emulation options were in use in various shops:
Open Mainframe, from Platform Solutions, Inc. (PSI)
FLEX-ES, from Fundamental Software, Inc.
Hercules, which is an open source package
None of these are viable options today. Nobody wanted to pay IBM for its Intellectual Property on the z/Architecture or license the use of the z/OS operating system. To fill the void, IBM put out an officially-supported emulation environment called IBM System z Professional Development Tool (zPDT) available to IBM employees, IBM Business Partners and ISVs that register through IBM Partnerworld. To help out developers and testers who work at clients that run mainframes, IBM now offers IBM Rational Developer for System z Unit Test, which is a modified version of zPDT that can run on a x86-based laptop or shared IBM System x server. Based on the open source [Eclipse IDE], the RDz emulates GP, IFL, zAAP and zIIP engines on a Linux-x86 base. A four-core x86 server can emulate a 3-engine mainframe.
With RDz, a developer can write code, compile and unit test all without consuming any mainframe MIPS. The interface is similar to Rational Application Developer (RAD), and so similar skills, tools and interfaces used to write Java, C/C++ and Fortran code can also be used for JCL, CICS, IMS, COBOL and PL/I on the mainframe. An IBM study ["Benchmarking IDE Efficiency"] found that developers using RDz were 30 percent more productive than using native z/OS ISPF. (I mention the use of RAD in my post [Three Things to do on the IBM Cloud]).
What does this all mean for the IT industry? First, the zEnterprise is perfectly positioned for [three-tier architecture] applications. A typical example could be a client-facing web-server on x86, talking to business logic running on POWER7, which in turn talks to database on z/OS in the z196 mainframe. Second, the zEnterprise is well-positioned for government agencies looking to modernize their operations and significantly reduce costs, corporations looking to consolidate data centers, and service providers looking to deploy public cloud offerings. Third, IBM storage is a great fit for the zEnterprise, with the IBM DS8000 series, XIV, SONAS and Information Archive accessible from both z196 and zBX servers.
Can Structured Query Language [SQL] be considered a storage protocol?
Several months ago, I was asked to review a book on SQL, titled appropriately enough "The Complete Idiot's Guide to SQL", by Steven Holzner, Ph.D. As a published author myself, I get a lot of these requests, and I agreed in this case, given that SQL was invented by IBM, and is a good fundamental skill to have for Business Analytics and Database Management.
(FTC Disclosure: I work for IBM but was not part of the SQL development team. I was provided a copy of this book for free to review it. I was not paid to mention this book, nor told what to write. I do not know the author personally nor anyone that works for his publicist. All of my opinions of the book in this blog post are my own.)
Despite an agreed-upon standard for SQL, each relational database management system (RDBMS) has decided to customize it for their own purposes. First, SQL can be quite wordy, so some RDBMS have made certain keywords optional. Second, RDBMS offer extra features by adding keywords or programming language extentions, options or parameters above and beyond what the SQL standard calls for. Third, the SQL standard has changed over the years, and some RDBMS have opted to keep some backward compatibility with their prior releases. Fourth, some RDBMS want to discourage people from easily porting code from one RDBMS to another, known in the industry as vendor lock-in.
Throughout my career, I have managed various databases, including Informix, DB2, MySQL, and Microsoft SQL Server, so I am quite familiar with the differences in SQL and the problems and implications that arise.
Most authors who want to write about SQL typically make a choice between (a) stick to the SQL standard, and expect the reader to customize the examples to their particular DBMS; or (b) stick to a single RDBMS implemenation, and offer examples that may not work on other RDBMS.
I found the book "The Complete Idiot's Guide to SQL" covered the basics quite well, but with an odd twist. The basics include creating databases and tables, defining columns, inserting and deleting rows, updating fields, and performing queries or joins. The odd twist is that Steven does not make the typical choice above, but rather shows how the various DBMS are different than standard SQL syntax, with actual working examples for different RDBMS.
You might be thinking to yourself that only an idiot would work in a place that had to require knowledge of multiple RDBMS. The sad truth is that most of the medium and large companies I speak to have two or more in production. This is either through acquisitions, or in some cases, individual business units or departments implementing their own via the [Shadow IT].
(For those who want to learn SQL and try out the examples in this book, IBM offers a free version of DB2 called [DB2-C Express] that runs on Windows, Linux, Mac OS, and Solaris.)
Last week, while I was in Russia for the [Edge Comes to You] event, I was interviewed by a journalist from [Storage News] on various topics. One question stuck me as strange. He asked why I did not mention IBM's acquisition of Netezza in my keynote session about storage. I had to explain that Netezza was not in the IBM System Storage product line, it is in a different group, under Business Analytics, where it belongs.
While it is true that Netezza can store data, because it has storage components inside, the same could also be said about nearly every other piece of IT equipment, from servers with internal disk, to digital cameras, smart phones and portable music players. They can all be considered storage devices, but doing so would undermine what differentiates them from one another.
Which brings me back to my original question: Should we consider SQL to be a storage protocol? For the longest time, IT folks only considered block-based interfaces as storage protocols, then we added file-based interfaces like CIFS and NFS, and we also have object-based interfaces, such as IBM's Object Access Method (OAM) and the System Storage Archive Manager (SSAM) API. Could SQL interfaces be the next storage protocol?
Let me know what you think on this. Leave a comment below.
A long time ago, perhaps in the early 1990s, I was an architect on the component known today as DFSMShsm on z/OS mainframe operationg system. One of my job responsibilities was to attend the biannual [SHARE conference to listen to the requirements of the attendees on what they would like added or changed to the DFSMS, and ask enough questions so that I can accurately present the reasoning to the rest of the architects and software designers on my team. One person requested that the DFSMShsm RELEASE HARDCOPY should release "all" the hardcopy. This command sends all the activity logs to the designated SYSOUT printer. I asked what he meant by "all", and the entire audience of 120 some attendees nearly fell on the floor laughing. He complained that some clever programmer wrote code to test if the activity log contained only "Starting" and "Ending" message, but no error messages, and skip those from being sent to SYSOUT. I explained that this was done to save paper, good for the environment, and so on. Again, howls of laughter. Most customers reroute the SYSOUT from DFSMS from a physical printer to a logical one that saves the logs as data sets, with date and time stamps, so having any "skipped" leaves gaps in the sequence. The client wanted a complete set of data sets for his records. Fair enough.
When I returned to Tucson, I presented the list of requests, and the immediate reaction when I presented the one above was, "What did he mean by ALL? Doesn't it release ALL of the logs already?" I then had to recap our entire dialogue, and then it all made sense to the rest of the team. At the following SHARE conference six months later, I was presented with my own official "All" tee-shirt that listed, and I am not kidding, some 33 definitions for the word "all", in small font covering the front of the shirt.
I am reminded of this story because of the challenges explaining complicated IT concepts using the English language which is so full of overloaded words that have multiple meanings. Take for example the word "protect". What does it mean when a client asks for a solution or system to "protect my data" or "protect my information". Let's take a look at three different meanings:
The first meaning is to protect the integrity of the data from within, especially from executives or accountants that might want to "fudge the numbers" to make quarterly results look better than they are, or to "change the terms of the contract" after agreements have been signed. Clients need to make sure that the people authorized to read/write data can be trusted to do so, and to store data in Non-Erasable, Non-Rewriteable (NENR) protected storage for added confidence. NENR storage includes Write-Once, Read-Many (WORM) tape and optical media, disk and disk-and-tape blended solutions such as the IBM Grid Medical Archive Solution (GMAS) and IBM Information Archive integrated system.
The second meaning is to protect access from without, especially hackers or other criminals that might want to gather personally-identifiably information (PII) such as social security numbers, health records, or credit card numbers and use these for identity theft. This is why it is so important to encrypt your data. As I mentioned in my post [Eliminating Technology Trade-Offs], IBM supports hardware-based encryption FDE drives in its IBM System Storage DS8000 and DS5000 series. These FDE drives have an AES-128 bit encryption built-in to perform the encryption in real-time. Neither HDS or EMC support these drives (yet). Fellow blogger Hu Yoshida (HDS) indicates that their USP-V has implemented data-at-rest in their array differently, using backend directors instead. I am told EMC relies on the consumption of CPU-cycles on the host servers to perform software-based encryption, either as MIPS consumed on the mainframe, or using their Powerpath multi-pathing driver on distributed systems.
There is also concern about internal employees have the right "need-to-know" of various research projects or upcoming acquisitions. On SANs, this is normally handled with zoning, and on NAS with appropriate group/owner bits and access control lists. That's fine for LUNs and files, but what about databases? IBM's DB2 offers Label-Based Access Control [LBAC] that provides a finer level of granularity, down to the row or column level. For example, if a hospital database contained patient information, the doctors and nurses would not see the columns containing credit card details, the accountants would not see the columnts containing healthcare details, and the individual patients, if they had any access at all, would only be able to access the rows related to their own records, and possibly the records of their children or other family members.
The third meaning is to protect against the unexpected. There are lots of ways to lose data: physical failure, theft or even incorrect application logic. Whatever the way, you can protect against this by having multiple copies of the data. You can either have multiple copies of the data in its entirety, or use RAID or similar encoding scheme to store parts of the data in multiple separate locations. For example, with RAID-5 rank containing 6+P+S configuration, you would have six parts of data and one part parity code scattered across seven drives. If you lost one of the disk drives, the data can be rebuilt from the remaining portions and written to the spare disk set aside for this purpose.
But what if the drive is stolen? Someone can walk up to a disk system, snap out the hot-swappable drive, and walk off with it. Since it contains only part of the data, the thief would not have the entire copy of the data, so no reason to encrypt it, right? Wrong! Even with part of the data, people can get enough information to cause your company or customers harm, lose business, or otherwise get you in hot water. Encryption of the data at rest can help protect against unauthorized access to the data, even in the case when the data is scattered in this manner across multiple drives.
To protect against site-wide loss, such as from a natural disaster, fire, flood, earthquake and so on, you might consider having data replicated to remote locations. For example, IBM's DS8000 offers two-site and three-site mirroring. Two-site options include Metro Mirror (synchronous) and Global Mirror (asynchronous). The three-site is cascaded Metro/Global Mirror with the second site nearby (within 300km) and the third site far away. For example, you can have two copies of your data at site 1, a third copy at nearby site 2, and two more copies at site 3. Five copies of data in three locations. IBM DS8000 can send this data over from one box to another with only a single round trip (sending the data out, and getting an acknowledgment back). By comparison, EMC SRDF/S (synchronous) takes one or two trips depending on blocksize, for example blocks larger than 32KB require two trips, and EMC SRDF/A (asynchronous) always takes two trips. This is important because for many companies, disk is cheap but long-distance bandwidth is quite expensive. Having five copies in three locations could be less expensive than four copies in four locations.
Fellow blogger BarryB (EMC Storage Anarchist) felt I was unfair pointing out that their EMC Atmos GeoProtect feature only protects against "unexpected loss" and does not eliminate the need for encryption or appropriate access control lists to protect against "unauthorized access" or "unethical tampering".
(It appears I stepped too far on to ChuckH's lawn, as his Rottweiler BarryB came out barking, both in the [comments on my own blog post], as well as his latest titled [IBM dumbs down IBM marketing (again)]. Before I get another rash of comments, I want to emphasize this is a metaphor only, and that I am not accusing BarryB of having any canine DNA running through his veins, nor that Chuck Hollis has a lawn.)
As far as I know, the EMC Atmos does not support FDE disks that do this encryption for you, so you might need to find another way to encrypt the data and set up the appropriate access control lists. I agree with BarryB that "erasure codes" have been around for a while and that there is nothing unsafe about using them in this manner. All forms of RAID-5, RAID-6 and even RAID-X on the IBM XIV storage system can be considered a form of such encoding as well. As for the amount of long-distance bandwidth that Atmos GeoProtect would consume to provide this protection against loss, you might question any cost savings from this space-efficient solution. As always, you should consider both space and bandwidth costs in your total cost of ownership calculations.
Of course, if saving money is your main concern, you should consider tape, which can be ten to twenty times cheaper than disk, affording you to keep a dozen or more copies, in as many time zones, at substantially lower cost. These can be encrypted and written to WORM media for even more thorough protection.
Well, it's Tuesday again, but this time, today we had our third big storage launch of 2009! A lot got announced today as part of IBM's big "Dynamic Infrastructure" marketing campaign. I will just focus on the
disk-related announcements today:
IBM System Storage DS8700
IBM adds a new model to its DS8000 series with the
[IBM System Storage DS8700]. Earlier this month, fellow blogger and arch-nemesis Barry Burke from EMC posted [R.I.P DS8300] on this mistaken assumption that the new DS8700 meant that DS8300 was going away, or that anyone who bought a DS8300 recently would be out of luck. Obviously, I could not respond until today's announcement, as the last thing I want to do is lose my job disclosing confidential information. BarryB is wrong on both counts:
IBM will continue to sell the DS8100 and DS8300, in addition to the new DS8700.
Clients can upgrade their existing DS8100 or DS8300 systems to DS8700.
BarryB's latest post [What's In a Name - DS8700] is fair game, given all the fun and ridicule everyone had at his expense over EMC's "V-Max" name.
So the DS8700 is new hardware with only 4 percent new software. On the hardware side, it uses faster POWER6 processors instead of POWER5+, has faster PCI-e buses instead of the RIO-G loops, and faster four-port device adapters (DAs) for added bandwidth between cache and drives. The DS8700 can be ordered as a single-frame dual 2-way that supports up to 128 drives and 128GB of cache, or as a dual 4-way, consisting of one primary frame, and up to four expansion frames, with up to 384GB of cache and 1024 drives.
Not mentioned explicitly in the announcements were the things the DS8700 does not support:
ESCON attachment - Now that FICON is well-established for the mainframe market, there is no need to support the slower, bulkier ESCON options. This greatly reduced testing effort. The 2-way DS8700 can support up to 16 four-port FICON/FCP host adapters, and the 4-way can support up to 32 host adapters, for a maximum of 128 ports. The FICON/FCP host adapter ports can auto-negotiate between 4Gbps, 2Gbps and 1Gbps as needed.
LPAR mode - When IBM and HDS introduced LPAR mode back in 2004, it sounded like a great idea the engineers came up with. Most other major vendors followed our lead to offer similar "partitioning". However, it turned out to be what we call in the storage biz a "selling apple" not a "buying apple". In other words, something the salesman can offer as a differentiating feature, but that few clients actually use. It turned out that supporting both LPAR and non-LPAR modes merely doubled the testing effort, so IBM got rid of it for the DS8700.
Update: I have been reminded that both IBM and HDS delivered LPAR mode within a month of each other back in 2004, so it was wrong for me to imply that HDS followed IBM's lead when obviously development happened in both companies for the most part concurrently prior to that. EMC was late to the "partition" party, but who's keeping track?
Initial performance tests show up to 50 percent improvement for random workloads, and up to 150 percent improvement for sequential workloads, and up to 60 percent improvement in background data movement for FlashCopy functions. The results varied slightly between Fixed Block (FB) LUNs and Count-Key-Data (CKD) volumes, and I hope to see some SPC-1 and SPC-2 benchmark numbers published soon.
The DS8700 is compatible for Metro Mirror, Global Mirror, and Metro/Global Mirror with the rest of the DS8000 series, as well as the ESS model 750, ESS model 800 and DS6000 series.
New 600GB FC and FDE drives
IBM now offers [600GB drives] for the DS4700 and DS5020 disk systems, as well as the EXP520 and EXP810 expansion drawers. In each case, we are able to pack up to 16 drives into a 3U enclosure.
Personally, I think the DS5020 should have been given a DS4xxx designation, as it resembles the DS4700
more than the other models of the DS5000 series. Back in 2006-2007, I was the marketing strategist for IBM System Storage product line, and part of my job involved all of the meetings to name or rename products. Mostly I gave reasons why products should NOT be renamed, and why it was important to name the products correctly at the beginning.
IBM System Storage SAN Volume Controller hardware and software
Fellow IBM master inventory Barry Whyte has been covering the latest on the [SVC 2145-CF8 hardware]. IBM put out a press release last week on this, and today is the formal announcement with prices and details. Barry's latest post
[SVC CF8 hardware and SSD in depth] covers just part of the entire
The other part of the announcement was the [SVC 5.1 software] which can be loaded
on earlier SVC models 8F2, 8F4, and 8G4 to gain better performance and functionality.
To avoid confusion on what is hardware machine type/model (2145-CF8 or 2145-8A4) and what is software program (5639-VC5 or 5639-VW2), IBM has introduced two new [Solution Offering Identifiers]:
5465-028 Standard SAN Volume Controller
5465-029 Entry Edition SAN Volume Controller
The latter is designed for smaller deployments, supports only a single SVC node-pair managing up to
150 disk drives, available in Raven Black or Flamingo Pink.
EXN3000 and EXP5060 Expansion Drawers
IBM offers the [EXN3000 for the IBM N series]. These expansion drawers can pack 24 drives in a 4U enclosure. The drives can either be all-SAS, or all-SATA, supporting 300GB, 450GB, 500GB and 1TB size capacity drives.
The [EXP5060 for the IBM DS5000 series] is a high-density expansion drawer that can pack up to 60 drives into a 4U enclosure. A DS5100 or DS5300
can handle up to eight of these expansion drawers, for a total of 480 drives.
Pre-installed with Tivoli Storage Productivity Center Basic Edition. Basic Edition can be upgraded with license keys to support Data, Disk and Standard Edition to extend support and functionality to report and manage XIV, N series, and non-IBM disk systems.
Pre-installed with Tivoli Key Lifecycle Manager (TKLM). This can be used to manage the Full Disk Encryption (FDE) encryption-capable disk drives in the DS8000 and DS5000, as well as LTO and TS1100 series tape drives.
IBM Tivoli Storage FlashCopy Manager v2.1
The [IBM Tivoli Storage FlashCopy Manager V2.1] replaces two products in one. IBM used
to offer IBM Tivoli Storage Manager for Copy Services (TSM for CS) that protected Windows application data, and IBM Tivoli Storage Manager for Advanced Copy Services (TSM for ACS) that protected AIX application data.
The new product has some excellent advantages. FlashCopy Manager offers application-aware backup of LUNs containing SAP, Oracle, DB2, SQL server and Microsoft Exchange data. It can support IBM DS8000, SVC and XIV point-in-time copy functions, as well as the Volume Shadow Copy Services (VSS) interfaces of the IBM DS5000, DS4000 and DS3000 series disk systems. It is priced by the amount of TB you copy, not on the speed or number of CPU processors inside the server.
Don't let the name fool you. IBM FlashCopy Manager does not require that you use Tivoli Storage Manager (TSM) as your backup product. You can run IBM FlashCopy Manager on its own, and it will manage your FlashCopy target versions on disk, and these can be backed up to tape or another disk using any backup product. However, if you are lucky enough to also be using TSM, then there is optional integration that allows TSM to manage the target copies, move them to tape, inventory them in its DB2 database, and provide complete reporting.
Yup, that's a lot to announce in one day. And this was just the disk-related portion of the launch!
Well, I'm back safely from my tour of Asia. I am glad to report that Tokyo, Beijing and Kuala Lumpur are pretty much how I remember them from the last time I was there in each city. I have since been fighting jet lag by watching the last thirteen episodes of LOST season 6 and the series finale.
Recently, I have started seeing a lot of buzz on the term "Storage Federation". The concept is not new, but rather based on the work in database federation, first introduced in 1985 by [A federated architecture for information management] by Heimbigner and McLeod. For those not familiar with database federation, you can take several independent autonomous databases, and treat them as one big federated system. For example, this would allow you to issue a single query and get results across all the databases in the federated system. The advantage is that it is often easier to federate several disparate heterogeneous databases than to merge them into a single database. [IBM Infosphere Federation Server] is a market leader in this space, with the capability to federate DB2, Oracle and SQL Server databases.
Storage expansion: You want to increase the storage capacity of an existing storage system that cannot accommodate the total amount of capacity desired. Storage Federation allows you to add additional storage capacity by adding a whole new system.
Storage migration: You want to migrate from an aging storage system to a new one. Storage Federation allows the joining of the two systems and the evacuation from storage resources on the first onto the second and then the first system is removed.
Safe system upgrades: System upgrades can be problematic for a number of reasons. Storage Federation allows a system to be removed from the federation and be re-inserted again after the successful completion of the upgrade.
Load balancing: Similar to storage expansion, but on the performance axis, you might want to add additional storage systems to a Storage Federation in order to spread the workload across multiple systems.
Storage tiering: In a similar light, storage systems in a Storage Federation could have different capacity/performance ratios that you could use for tiering data. This is similar to the idea of dynamically re-striping data across the disk drives within a single storage system, such as with 3PAR's Dynamic Optimization software, but extends the concept to cross storage system boundaries.
To some extent, IBM SAN Volume Controller (SVC), XIV, Scale-Out NAS (SONAS), and Information Archive (IA) offer most, if not all, of these capabilities. EMC claims its VPLEX will be able to offer storage federation, but only with other VPLEX clusters, which brings up a good question. What about heterogenous storage federation? Before anyone accuses me of throwing stones at glass houses, let's take a look at each IBM solution:
IBM SAN Volume Controller
The IBM SAN Volume Controller has been doing storage federation since 2003. Not only can IBM SAN Volume Controller bring together storage from a variety of heterogenous storage, the SVC cluster itself can be a mix of different hardware models. You can have a 2145-8A4 node pair, 2145-8G4 node pair, and the new 2145-CF8 node pair, all combined together into a single SVC cluster. Upgrading SVC hardware nodes in an SVC cluster is always non-disruptive.
IBM XIV storage system
The IBM XIV has two kinds of independent modules. Data modules have processor, cache and 12 disks. Interface modules are data modules with additional processor, FC and Ethernet (iSCSI) adapters. Because these two modules play different roles in an XIV "colony", that number of each type is predetermined. Entry-level six-module systems have 2 interface and 4 data modules. Full 15-module systems have 6 interface and 9 data modules. Individual modules can be added or removed non-disruptively in an XIV.
IBM Scale-Out NAS
The SONAS is comprised of three kinds of nodes that work together in concert. A management node, one or more interface nodes, and two or more storage nodes. The storage nodes are paired to manage up to 240 nodes in a storage pod. Individual interface or data nodes can be added or removed non-disruptively in the SONAS. The underlying technology, the General Parallel File System, has been doing storage federation since 1996 for some of the largest top 500 supercomputers in the world.
IBM Information Archive (IA)
For the IA, there are 1, 2 or 3 nodes, which manages a set of collections. A collection can either be file-based using industry-standard NAS protocols, or object-based using the popular System Storage™ Archive Manager (SSAM) interface. Normally, you have as many collections as you have nodes, but nodes are powerful enough to manage two collections to provide N-1 availability. This allows a node to be removed, and a new node added into the IA "colony", in a non-disruptive manner.
Even in an ant colony, there are only a few types of ants, with typically one queen, several males, and lots of workers. But all the ants are red. You don't see colonies that mix between different species of ants. For databases, federation was a way to avoid the much harder task of merging databases from different platforms. For storage, I am surprised people have latched on to the term "federation", given our mixed results in the other "federations" we have formed, which I have conveniently (IMHO) ranked from least effective to most effective:
The Union of Soviet Socialist Republics (USSR)
My father used to say, "If the Soviet Union were in charge of the Sahara desert, they would run out of sand in 50 years." The [Soviet Union] actually lasted 68 years, from 1922 to 1991.
The United Nations (UN)
After the previous League of Nations failed, the UN was formed in 1945 to facilitate cooperation in international law, international security, economic development, social progress, human rights, and the achieving of world peace by stopping wars between countries, and to provide a platform for dialogue.
The European Union (EU)
With the collapse of the Greek economy, and the [rapid growth of debt] in the UK, Spain and France, there are concerns that the EU might not last past 2020.
The United States of America (USA)
My own country is a federation of states, each with its own government. California's financial crisis was compared to the one in Greece. My own state of Arizona is under boycott from other states because of its recent [immigration law]. However, I think the US has managed better than the EU because it has evolved over the past 200 years.
The Organization of the Petroleum Exporting Countries [OPEC]
Technically, OPEC is not a federation of cooperating countries, but rather a cartel of competing countries that have agreed on total industry output of oil to increase individual members' profits. Note that it was a non-OPEC company, BP, that could not "control their output" in what has now become the worst oil spill in US history. OPEC was formed in 1960, and is expected to collapse sometime around 2030 when the world's oil reserves run out. Matt Savinar has a nice article on [Life After the Oil Crash].
United Federation of Planets
The [Federation] fictitiously described in the Star Trek series appears to work well, an optimistic view of what federations could become if you let them evolve long enough.
Given the mixed results with "federation", I think I will avoid using the term for storage, and stick to the original term "scale-out architecture".
New IBM PureData Systems help clients harness data for critical insights
Well it's Tuesday, and you know what that means! IBM Announcements! Actually, it is Wednesday, but I started writing this post yesterday, and had to do some additional research to finish.
This week, IBM introduced the newest member of the PureSystems family of expert integrated systems - IBM PureData System. The new systems are designed to help clients effectively harness the massive volume, variety and velocity of information being created every day. The result? They deliver critical insights to improve business results.
The new systems are available in three different models, each optimized specifically for different workloads.
PureData System for Transactions. Optimized for transactional processing workloads such as e-commerce and built to handle large volumes of transactions with flexibility, availability, scalability and integrity. Basically, this is IBM DB2 pureScale and InfoSphere Optim features running on Linux-x86 nodes. The system comes in small, medium and large tee-shirt sizes, and can support over 100 databases. If you have DB2 applications, these can work with PureData unchanged. If your applications are based on Oracle databases, these can work with minimal changes to use PureData systems.
PureData System for Analytics. Powered by Netezza technology, this data warehouse system features built-in database analytics to quickly explore and analyze large amounts of sturctured information. This is the beefed-up version of the Netezza TwinFin 1000. IBM DB2® Analytics Accelerator for z/OS® V3.1 (IDAA) supports both the new IBM PureData System for Analytics N1001 and existing IBM Netezza 1000 systems as accelerators.
PureData System for Operational Analytics. Capable of delivering actionable insights concurrently to more than 1,000 business operations, supporting real-time decision making for businesses. This is the follow-on product to the IBM Smart Analytics System 7700 based on POWER7 nodes. This uses IBM Storwize V7000 disk systems inside.
PureData System joins the PureSystems family which also includes the PureFlex System and PureApplication System, [both announced last April]. PureSystems provide built-in expertise, integration by design and simplification through the system lifecyle, helping businesses reduce complexity, accelerate value and improve IT economics.
In a related announcement, Andy Monshaw was recently named IBM General Manager, PureFlex. Some of you readers may remember that Andy Monshaw was previously the General Manager for IBM System Storage several years ago, and was my second line manager, and I am glad to welcome him back!
Well, it's Wednesday, and you know what that means... IBM Announcements!
(Actually most IBM announcements are on Tuesdays, but IBM gave me extra time to recover from my trip to Europe!)
Today, IBM announced [IBM PureSystems], a new family of expert-integrated systems that combine storage, servers, networking, and software, based on IBM's decades of experience in the IT industry. You can register for the [Launch Event] today (April 11) at 2pm EDT, and download the companion "Integrated Expertise" event app for Apple, Android or Blackberry smartphones.
(If you are thinking, "Hey, wait a minute, hasn't this been done before?" you are not alone. Yes, IBM introduced the System/360 back in 1964, and the AS/400 back in 1988, so today's announcement is on scheduled for this 24-year cycle. Based on IBM's past success in this area, others have followed, most recently, Oracle, HP and Cisco.)
Initially, there are two offerings:
IBM PureFlex™ System
IBM PureFlex is like IaaS-in-a-box, allowing you to manage the system as a pool of virtual resources. It can be used for private cloud deployments, hybrid cloud deployments, or by service providers to offer public cloud solutions. IBM drinks its own champagne, and will have no problem integrating these into its [IBM SmartCloud] offerings.
To simplify ordering, the IBM PureFlex comes in three tee-shirt sizes: Express, Standard and Enterprise.
IBM PureFlex is based on a 10U-high, 19-inch wide, standard rack-mountable chassis that holds 14 bays, organized in a 7 by 2 matrix. Unlike BladeCenter where blades are inserted vertically, the IBM PureFlex nodes are horizontal. Some of the nodes take up a single bay (half-wide), but a few are full-wide, take up two bays, the full 19-inch width of the chassis. Compute and storage snap in the front, while power supplies, fans, and networking snap in the back. You can fit up to four chassis in a standard 42U rack.
Unlike competitive offerings, IBM does not limit you to x86 architectures. Both x86 and POWER-based compute nodes can be mixed into a single chassis. Out of the box, the IBM PureFlex supports four operating systems (AIX, IBM i, Linux and Windows), four server hypervisors (Hyper-V, Linux KVM, PowerVM, and VMware), and two storage hypervisors (SAN Volume Controller and Storwize V7000).
There are a variety of storage options for this. IBM will offer SSD and HDD inside the compute nodes themselves, direct-attached storage nodes, and an integrated version of the Storwize V7000 disk system. Of course, every IBM System Storage product is supported as external storage. Since Storwize V7000 and SAN Volume Controller support external virtualization, many non-IBM devices will be supported automatically as well.
Networking is also optimized, with options for 10Gb and 40Gb Ethernet/FCoE, 40Gb and 56Gb Infiniband, 8Gbps and 16Gbps Fibre Channel. Much of the networking traffic can be handled within the chassis, to minimize traffic on external switches and directors.
For management, IBM offers the Flex System Manager, that allows you to manage all the resources from a single pane of glass. The goal is to greatly simplify the IT lifecycle experience of procurement, installation, deployment and maintenance.
IBM PureApplication™ System
IBM PureApplication is like PaaS-in-a-box. Based on the IBM PureFlex infrastructure, the IBM PureApplication adds additional software layers focused on transactional web, business logic, and database workloads. Initially, it will offer two platforms: Linux platform based on x86 processors, Linux KVM and Red Hat Enterprise Linux (RHEL); and a UNIX platform based on POWER7 processors, PowerVM and AIX operating system. It will be offered in four tee-shirt sizes (small, medium, large and extra large).
In addition to having IBM's middleware like DB2 and WebSphere optimized for this platform, over 600 companies will announce this week that they will support and participate in the IBM PureSystems ecosystem as well. Already, there are 150 "Patterns of Expertise" ready to deploy from IBM PureSystem Centre, a kind of a "data center app store", borrowing an idea used today with smartphones.
By packaging applications in this manner, workloads can easily shift between private, hybrid and public clouds.
If you are unhappy with the inflexibility of your VCE Vblock, HP Integrity, or Oracle ExaLogic, talk to your local IBM Business Partner or Sales Representative. We might be able to buy your boat anchor off your hands, as part of an IBM PureSystems sale, with an attractive IBM Global Financing plan.
This week, IBM made over a dozen announcements related to IBM storage products. Here is part 2 of my overview:
IBM System Storage® DS8000 series microcode
One of the advantages of acquiring XIV as IBM's other high-end disk system, is that it allows the DS8000 team to focus on the IBM i and z/OS operating systems. As a result, IBM DS8000 has over half the mainframe-attach market share.
For both the DS8700 and DS8800 models, IBM Easy Tier now support sub-LUN automated tiering across three storage tiers: Solid-State Drives, high-performance spinning disk drives (15K and 10K RPM), and high-capacity disk drives (7200 RPM).
For System z customers, the latest DS8000 microcode has synergy with z/OS and GDPS, now supporting 4x larger EAV volumes, faster high-performance FICON (zHPF), and Workload Manager (WLM) integration with the I/O Priority Manager. IBM has a world record SAP performance of 59 million account postings per hour. DB2 v10 for z/OS queries were measured at 11x faster using the new zHPF feature.
IBM System Storage® DS8800 systems
On the hardware side, the DS8800 now supports a fourth frame to hold a total over 1,500 disk drives. Yes, we have customers that three frames wasn't enough, and they wanted more.
IBM is now also offering new drive options. Small Form Factor (2.5 inch) drives now include 300GB 15K RPM drives, and a 900GB 10K RPM drives. But wait! There's more! The DS8800 is no longer a SFF-only box, it now allows for mixing in Large form factor (3.5 inch) drives, starting with the 3TB NL-SAS 7200 RPM drive.
IBM XIV® Storage System Gen3
We announced the XIV Gen3 already, but we have two enhancements.
First, we now offer a model based entirely on 3TB NL-SAS drives. If you are thinking, what IBM is going to put 3TB drives into everything? Yup. Once we go through all the pain and suffering of qualifying a drive, we make sure we get our money's worth!
Secondly, we have now an iPad application to manage the XIV. This has nothing to do with Apple CEO Steve Jobs passing away last week, it was merely coincidence.
IBM Real-time Compression Appliances™ STN6500 and STN6800 V3.8
The latest software for RtCA now supports Microsoft SMB v2, and enhanced reporting so that storage admins know exactly the benefits of the compression ratios of different file extensions.
IBM System Storage EXP2500 Express®
The EXP2500 is for direct-attach situations, like the IBM BladeCenter. IBM adds LFF 3.5-inch 3TB NL-SAS drives, SFF 2.5-inch 300GB 15K RPM SAS drives, and 900GB 7200 RPM NL-SAS drives.
My colleague Curtis Neal refers to these as "B.F.D" announcements, which of course stands for Bigger, Faster, Denser!
This post concludes my series of posts on Oracle OpenWorld 2011 conference. Here are some pictures from Wednesday and Thursday.
IBM as the yardstick by which everyone measures against
Our friends at Violin Memory systems mentioned our joint-venture success results with IBM GPFS, scanning 10 billion files in less than an hour. (Their booth must have been slow, because members of their team spent a lot of time in our IBM booth!)
In fact, it seemed every company compared themselves to IBM in one fashion or another. Larry said that "IBM is a great company" and mentioned the IBM systems several times in comparisons to Oracle's newly announced hardware offerings.
Larry's Sailing Vessel
When things slowed down, I took a walk to see the other parts of the exhibition area. In the Moscone West building was Larry's catamaran that won [last year's America's Cup].
I used to sail myself, and have been part of crews in sailing races in both Japan and Australia. A few years ago, I watched the America's Cup time trials in New Zealand.
On the Streets of San Francisco
On the streets, IBM had advertised some of its products in a manner that thousands of attendees would see every day. Here we have some factoids related to IBM Netezza and DB2 database on POWER servers. We were very careful not to mention either product in the IBM Booth itself, as we all understand that IBM is a guest in Oracle's house this week. We certainly don't want to do anything to upset Larry in any way to make him treat IBM like he treated HP last year, or Salesforce.com this year.
Rest in Peace, Steve Jobs, 1955-2011
On Wednesday evening at Oracle OpenWorld, we were tearing down the booth when we heard that Apple co-founder Steve Jobs had passed away. This is truly a loss for the entire IT industry. I never met Steve in person, nor have I been to any Apple conferences like MacWorld that he spoke at.
At various keynote sessions, Larry Ellison compared his Oracle products to those of Apple, Inc., suggesting that Oracle is the "Apple for the Enterprise".
On our way back to the Hilton hotel on O'Farrell, there was a candle vigil at the Apple Store near Union Square. People left sticky notes on the glass window.
There were a lot of tributes to Steve Jobs, but I liked this 15-minute video of his 2005 Commencement Speech at Stanford University titled [How to Live before you Die.
This will be one of those moments where years later, many people will remember exactly where they were, and what they were doing, when they heard the news. For many, that news came as tweets or text messages on the very iPhones and iPads he helped design.
Rock Concert - Wednesday night
On Wednesday evening, I joined thousands of other attendees on Treasure Island to hear and watch Sting, Tom Petty and the Heartbreakers, and the English Beat in concert. It was cold and dark, but we all had a good time. Needless to say, I didn't make it to Marc Benioff's 8:00am Thursday morning session!
A word of advice: If you go to an evening rock concert at Treasure Island, dress warmly!
Despite the sad news about Steve Jobs, I had a great time at this conference. I learned a lot about what other IT vendors are doing, talked to dozens of IBM clients at the booth, and got to make some new friends that work in other parts of IBM.
(FTC Disclosure: I work for IBM. IBM and Apple are technology partners. I proudly own an Apple iPod, several Mac Mini computers and shares of stock in both IBM and Apple, Inc.)
IBM announced that it will offer [three free months of IBM Smart Business Cloud] computing and storage services to government agencies, charitable non-profit organizations, and other organizations involved with reconstruction resulting from the earthquakes and tsunami in Japan and the northern Pacific region.
With traditional communications down, and many data centers incapacitated, Cloud Computing can be a great way to resume operations. According to the announcement, organizations can submit their requests now until April 30, and the program will run until July 31, 2011. Options include:
Virtual machine images running 32-bit and 64-bit versions of Linux or Windows.
60GB to 2 TB of disk storage per instance.
Options for various IBM middleware (DB2, Informix, Lotus, and WebSphere)
Rational Application Lifecycle Management and Tivoli Monitoring software
The offer also includes [LotusLive] Software-as-a-Service (SaaS) for email and online collaboration. For more about LotusLive, see this [Red Paper].
Wrapping up my week's coverage of the IBM Pulse 2011 conference, I have had several people ask me to explain IBM's latest initiative, Smarter Computing, which IBM launched this week at this conference. Having led the IT industry through the Centralized Computing era and the Distributed Computing era, IBM is now well-positioned to help companies, governments and non-profit organizations to enter the new Smarter Computing era, focused on insight and discovery.
Thousands of IT professionals
Effiicent, but only the largest companies and governments had them
Millions of office workers
Personal computers (PC)
Innovative, extending the reach to small and medium-sized businesses, but resulted in server sprawl and increased TCO
Billions of people
Smart phones and other handheld devices
Efficient and Innovative, combining the best of centralized and distributed computing
1952 to 1980
1981 to 2010
2011 and beyond
To help clients with this transition, IBM's Smarter Computing initiative has three main components. This is a corporate-wide strategy, with systems, software and services all working together to realize results.
The first component is Big Data. This combines three different sources of data:
Traditional structured data in OLTP databases and OLAP data warehouses, using data management solutions like DB2 and IBM Netezza.
Unstructured data, including text documents, images, audio, and video, processed with massive parallelism using IBM BigInsights and Apache Hadoop.
Real-Time Analytics Processing (RTAP) of incoming data, including video surveillance, social media, RFID chips, smart meters, and traffic control systems, processed with IBM InfoSphere Streams
Of course, Big Data will bring new opportunities on the storage front, which I will save for a future post!
Rather than general purpose IT equipment, we have now the scale and scope to specialize with systems optimized for particular workloads, the second component of the Smarter Computing initiative. Of course, IBM has been delivering integrated stacks of systems, software and services for decades now, but it is important to remind people of this, as IBM now has a spate of competitors all trying to follow IBM's lead in this arena.
As with Big Data, the focus on Optimized Systems has impacted IBM's strategy on storage as well. I'll save that discussion for a future post as well!
I am glad that nearly all of the storage vendors have standardized to a common definition for Cloud, the third component of Smarter Computing, which shows that this concept has matured:
Cloud computing is a pay-per-use model for enabling network access to a pool of computing resources that can be provisioned and released rapidly with minimal management effort or service provider interaction. -- U.S. National Institute of Standards and Technology [nist.gov]
Of course, Cloud is just an evolution of IBM's Service Bureau business of the 1960s and 1970s, renting out time-sharing on mainframe systems, Grid Computing of the 1980s, and Application Service Providers that popped up in the 1990s. While the [butchers, bakers and candlestick makers] that IBM competes against might focus their efforts on just private cloud or just public cloud, IBM recognizes the reality is that different clients will need different solutions. Rather than rip-and-replace, IBM will help clients transition to cloud via inclusive solutions that adopt a hybrid approach:
Traditional enterprise with private cloud deployments, using solutions like IBM CloudBurst, SONAS and Information Archive
Traditional enterprise with public cloud services to handle seasonable peaks, providing offsite resiliency, and solutions for a mobile workforce
Hybrid clouds that blend private and public cloud services, to handle seasonal peak workloads, remote and branch offices
IBM's emphasis on IT Infrastructure Library (ITIL), Tivoli and Maximo products will play well in this space to provide integrated service management across traditional and cloud deployments. This is why IBM decided to launch Smarter Computing initiative at Pulse 2011 conference, the industry's premiere conference on intergrated service management.
The IBM Watson that competed on Jeopardy! is an excellent example of all three components of Smarter Computing at work.
IBM Watson was able to respond to Jeopardy! clues within three seconds, processing a combination of database searches with DB2 and text-mining analytics of unstructured data with IBM BigInsights.
IBM Watson combined servers, software and storage into an integrated supercomputer that was optimized for one particular workload: playing Jeopardy!
IBM Watson used many technologies prevalent in private and public cloud computing systems, storing its data on a modified version of SONAS for storage, using xCat administration tools, networking across 10GbE Ethernet, and massive parallel processing through lots of PowerVM guest images.
The "Basic" offering includes a single IBM Storwize V7000 controller enclosure, and three year warranty package that includes software licenses for IBM Tivoli Storage FlashCopy Manager (FCM) and IBM Tivoli Storage Productivity Center for Disk - Midrange Edition (MRE). Planning, configuration and testing services for the software are included and can be performed by either IBM or an IBM Business Partner.
The "Standard" offering allows for multiple IBM Storwize V7000 enclosures, provides three year warranty package for the FCM and MRE software, and includes implementation services for both the hardware and the software components. These services can be performed by IBM or an IBM Business Partner.
Why bundle? Here are the key advantages for these offerings:
Increased storage utilization! First introduced in 2003, IBM SAN Volume Controller is able to improve storage utilization by 30 percent through virtualization and thin provisioning. IBM Storwize V7000 carries on this tradition. Space-efficient FlashCopy is included in this bundle at no additional charge and can reduce the amount of storage normally required for snapshots by 75 percent or more. IBM Tivoli Storage FlashCopy Manager can manage these FlashCopy targets easily.
Improved storage administrator productivity! The new IBM Storwize V7000 Graphical User Interface can help improve administrator productivity up to 2 times compared to other midrange disk solutions. The IBM Tivoli Storage Productivity Center for Disk - Midrange Edition provides real-time performance monitoring for faster analysis time.
Increased application performance! This bundle includes the "Easy Tier" feature at no additional charge. Easy Tier is IBM's implementation of sub-LUN automated tiering between Solid-State Drives (SSD) and spinning disk. Easy Tier can help improve application throughput up to 3 times, and improve response time up to 60 percent. Easy Tier can help meet or exceed application performance levels with its internal "hot spot" analytics.
Increased application availability! IBM Tivoli Storage FlashCopy Manager provides easy integration with existing applications like SAP, Microsoft Exchange, IBM DB2, Oracle, and Microsoft SQL Server. Reduce application downtime to just seconds with backups and restores using FlashCopy. The built-in online migration feature, included at no additional charge, allows you to seamlessly migrate data from your old disk to the new IBM Storwize V7000.
Significantly reduced implementation time! This bundle will help you cut implementation time in half, with little or no impact to storage administrator staff. This will help you realize your return on investment (ROI) much sooner.
Continuing my week in Washington DC for the annual [2010 System Storage Technical University], here is my quick recap of the keynote sessions presented Monday morning. Marlin Maddy, Worldwide Technical Events Executive for IBM Systems Lab Services and Training, served as emcee.
Roland Hagan, IBM Vice President for IBM System x server platform, presented on how IBM is redefining the x86 computing experience. More than 50 percent of all servers are x86 based. These x86 servers are easy to acquire, enjoy a large application base, and can take advantage of readily available skilled workforce for administration. The problem is that 85 percent of x86 processing power remains idle, energy costs are 8 times what they were 12 years ago, and management costs are now 70 percent of the IT budget.
IBM has the number one market share for scalable x86 servers. Roland covered the newly announced eX5 architecture that has been deployed in both rack-optimized models as well as IBM BladeCenter blade servers. These can offer 2x the memory capacity as competitive offerings, which is important for today's server virtualization, database and analytics workloads. This includes 40 and 80 DIMM models of blades, and 64 to 96 DIMM models of rack-optimized systems. IBM also announced eXFlash, internal Solid State Drives accessible at bus speeds. FlexNode allows a 4-node system to dynamically change to 2 separate 2-node systems.
By 2013, analysts estimate that 69 percent of x86 workloads will be virtualized, and that 22 percent of servers will be running some form of hypervisor software. By 2015, this grows to 78 percent of x86 workloads being virtualized, and 29 percent of servers running hypervisor.
Doug Balog, IBM Vice President and Disk Storage Business Line Executive, presented how the growth of information results in a "perfect storom" for the storage industry. Storage Admins are focused on managing storage growth and the related costs and complexity, proper forecasting and capacity planning, and backup administration. IBM's strategy is to help clients in the following areas:
Storage Efficiency - getting the most use out of the resources you invest
Service Delivery - ensuring that information gets to the right people at the right time, simplify reporting and provisioning
Data Protection - protecting data against unethical tampering, unauthorized access, and unexpected loss and corruption
He wrapped up his talk covering the success of DS8700 and XIV. In fact, 60 percent of XIV sales are to EMC customers. The TCO of an XIV is less than half the TCO of a comparable EMC VMAX disk system.
Dave McQueeney, IBM Vice President for Strategy and CTO for US Federal, covered how IBM's Smarter Planet vision for smarter cities, smarter healthcare, smarter energy grid and smarter traffic are being adopted by the public sector. Almost every data center in US Federal government is out of power, floor space and/or cooling capability. An estimated 80 percent of US Federal government IT budgets are spent on maintenance and ongoing operations, leaving very little left over for the big transformational projects that President Barack Obama wants to accomplish.
Who has the most active Online Transaction Processing (OLTP)? You might guess a big bank, but it is the US Department of Homeland Security (DHS), with a system processing 600 million transactions per day. Another government agency is #2, and the top Banking application is finally #3. The IBM mainframe has solved problems 10 to 15 years ago that the distributed systems are just now encountering today. Worldwide, more than 80 percent of banks use mainframes to handle their financial transactions.
IBM's recent POWER7 set of servers are proving successful in the field. For example, Allianz was able to consolidate 60 servers to 1. Running DB2 on POWER7 server is 38 percent less expensive than Oracle on x86 Nehalem processors. For Java, running JVM on POWER7 is 73 percent better than JVM on x86 Nehalem.
The US federal government ingests a large amount of data. It has huge 10-20 PB data warehouses. In fact, the amount of GB received every year by the US federal government alone exceed the production of all disk drives produced by all drive manufacturers. This means that all data must be processed through "data reduction" or it is gone forever.
The last keynote for Monday was given by Clod Barrera, IBM Distinguished Engineer and Chief Technical Strategist for System Storage. He started out shocking the audience with his view that the "disk drive industry is a train wreck". While R&D in disk drives enjoyed a healthy improvement curve up to about 2004, it has now slowed down, getting more difficult and more expensive to improve performance and capacity of disk drives. The rest of his presentation was organized around three themes:
Integrated Stacks - while new-comers like Oralce/Sun and the VCE coalition are promoting the benefits of integrated stacks, IBM has been doing this for the past five decades. New advancements in Server and Storage virtualization provide exciting new opportunities.
Integrated Systems - solutions like IBM Information Archive and SONAS, and new features like Easy Tier that help adopt SSD transparently. As it gets harder and harder to scale-up, IBM has moved to innovative scale-out architectures.
Integrated Data Center management - companies are now realizing that management and governance are critical factors of success, and that this needs to be integrated between traditional IT, private, public and hybrid cloud computing.
This was a great inspiring start for what looks like an awesome week!
Well, it feels like Tuesday and you know what that means... "IBM Announcement Day!" Actually, today is Wednesday, but since Monday was Memorial Day holiday here in the USA, my week is day-shifted. Yesterday, IBM announced its latest IBM FlashCopy Manager v2.2 release. Fellow blogger, Del Hoobler (IBM) has also posted something on this out atthe [Tivoli Storage Blog].
IBM FlashCopy Manager replaces two previous products. One was called Tivoli Storage Manager for Copy Services, the other was called Tivoli Storage Manager for Advanced Copy Services. To say people were confused between these two was an understatement, the first was for Windows, and the second was for UNIX and Linux operating systems. The solution? A new product that replaces both of these former products to support Windows, UNIX and Linux! Thus, IBM FlashCopy Manager was born. I introduced this product back in 2009 in my post [New DS8700 and other announcements].
IBM Tivoli Storage FlashCopy Manager provides what most people with "N series SnapManager envy" are looking for: application-aware point-in-time copies. This product takes advantage of the underlying point-in-time interfaces available on various disk storage systems:
FlashCopy on the DS8000 and SAN Volume Controller (SVC)
Snapshot on the XIV storage system
Volume Shadow Copy Services (VSS) interface on the DS3000, DS4000, DS5000 and non-IBM gear that supports this Microsoft Windows protocol
For Windows, IBM FlashCopy Manager can coordinate the backup of Microsoft Exchange and SQL Server. The new version 2.2 adds support for Exchange 2010 and SQL Server 2008 R2. This includes the ability to recover an individual mailbox or mail item from an Exchange backup. The data can be recovered directly to an Exchange server, or to a PST file.
For UNIX and Linux, IBM FlashCopy Manager can coordinate the backup of DB2, SAP and Oracle databases. Version 2.2 adds support specific Linux and Solaris operating systems, and provides a new capability for database cloning. Basically, database cloning restores a database under a new name with all the appropriate changes to allow its use for other purposes, like development, test or education training. A new "fcmcli" command line interface allows IBM FlashCopy Manager to be used for custom applications or file systems.
A common misperception is that IBM FlashCopy Manager requires IBM Tivoli Storage Manager backup software to function. That is not true. You have two options:
In Stand-alone mode, it's just you, the application, IBM FlashCopy Manager and your disk system. IBM FlashCopy Manager coordinates the point-in-time copies, maintains the correct number of versions, and allows you to backup and restore directly disk-to-disk.
Unified Recovery Management with Tivoli Storage Manager
Of course, the risk with relying only on point-in-time copies is that in most cases, they are on the same disk system as the original data. The exception being virtual disks from the SAN Volume Controller. IBM FlashCopy Manager can be combined with IBM Tivoli Storage Manager so that the point-in-time copies can be copied off to a local or remote TSM server, so that if the disk system that contains both the source and the point-in-time copies fails, you have a backup copy from TSM. In this approach, you can still restore from the point-in-time copies, but you can also restore from the TSM backups as well.
IBM FlashCopy Manager is an excellent platform to connect application-aware fucntionality with hardware-based copy services.
Continuing my coverage of the IBM Dynamic Infrastructure Executive Summit at the Fairmont Resort in Scottsdale, Arizona, we had a day full main-tent sessions. Here is a quick recap of the sessions presented in the morning.
Leadership and Innovation on a Smarter Planet
Todd Kirtley, IBM General Manager of the western United States, kicked off the day. He explained that we are now entering the Decade of Smart: smarter healthcare, smarter energy, smarter traffic systems, and smarter cities, to name a few. One of those smarter cities is Dubuque, Iowa, nicknamed the Masterpiece of the Mississippi river. Mayor Roy Boul of Dubuque spoke next on his testimonial on working with IBM. I have never been to Dubuque, but it looks and sounds like a fun place to visit. Here is the [press release] and a two-minute [video].
Smarter Systems for a Smarter Planet
Tom Rosamillia, IBM General Manager of the System z mainframe platform, presented on smarter systems. IBM is intentionally designing integrated systems to redefine performance and deliver the highest possible value for the least amount of resource. The five key focus areas were:
Enabling massive scale
Organizing vast amounts of data
Turning information into insight
Increasing business agility
Managing risk, security and compliance
The Future of Systems
Ambuj Goyal, IBM General Manager of Development and Manufacturing, presented the future of systems. For example, reading 10 million electricity meters monthly is only 120 million transactions per year, but reading them daily is 3.65 billion, and reading them every 15 minutes will result in over 350 billion transactions per year. What would it take to handle this? Beyond just faster speeds and feeds, beyond consolidation through virtualization and multi-core systems, beyond pre-configured fit-for-purpose appliances, there will be a new level for integrated systems. Imagine a highly dense integration with over 3000 processors per frame, over 400 Petabytes (PB) of storage, and 1.3 PB/sec bandwidth. Integrating software, servers and storage will make this big jump in value possible.
POWERing your Planet
Ross Mauri, IBM General Manager of Power Systems, presented the latest POWER7 processor server product line. The IBM POWER-based servers can run any mix of AIX, Linux and IBM i (formerly i5/OS) operating system images. Compared to the previous POWER6 generation, POWER7 are four times more energy efficient, twice the performance, at about the same price. For example, an 8-socket p780 with 64 cores (eight per socket) and 256 threads (4 threads per core) had a record-breaking 37,000 SAP users in a standard SD 2-tier benchmark, beating out 32-socket and 64-socket M9000 SPARC systems from Oracle/Sun and 8-socket Nehalem-EX Fujitsu 1800E systems. See the [SAP benchmark results] for full details. With more TPC-C performance per core, the POWER7 is 4.6 times faster than HP Itanium and 7.5 times faster than Oracle Sun T5440.
This performance can be combined with incredible scalability. IBM's PowerVM outperforms VMware by 65 percent and provides features like "Live Partition Mobility" that is similar to VMware's VMotion capability. IBM's PureScale allows DB2 to scale out across 128 POWER servers, beating out Oracle RAC clusters.
The final speaker in the morning was Greg Lotko, IBM Vice President of Information Management Warehouse solutions. Analytics are required to gain greater insight from information, and this can result in better business outcomes. The [IBM Global CFO Study 2010] shows that companies that invest in business insight consistently outperform all other enterprises, with 33 percent more revenue growth, 32 percent more return on invested (ROI) capital, and 12 times more earnings (EBITDA). Business Analytics is more than just traditional business intelligence (BI). It tries to answer three critical questions for decision makers:
What is happening?
Why is it happening?
What is likely to happen in the future?
The IBM Smart Analytics System is a pre-configured integrated system appliance that combines text analytics, data mining and OLAP cubing software on a powerful data warehouse platform. It comes in three flavors: Model 5600 is based on System x servers, Model 7600 based on POWER7 servers, and Model 9600 on System z mainframe servers.
IBM has over 6000 business analytics and optimization consultants to help clients with their deployments.
While this might appear as "Death by Powerpoint", I think the panel of presenters did a good job providing real examples to emphasize their key points.