Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Tony Pearson is a Master Inventor and Senior Software Engineer for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
Continuing my coverage of the [IBM System x and System Storage Technical Symposium], I thought I would start with some photos. I took these with cell phone, and without realizing how much it would cost, uploaded them to Flickr at international data roaming rates. Oops!
Here are some of the banners used at the conference. Each break-out session room was outfitted with a "Presentation Briefcase" that had everything a speaker might need, including power plug adapters and dry-erase markers for the whiteboard. What a clever idea!
Here is a recap of the last and final day 3:
Understanding IBM's Storage Encryption Options
Special thanks to Jack Arnold for providing me his deck for this presentation. I presented IBM's leadership in encryption standards, including the [OASIS Key Management Interoperability Protocol] that allows many software and hardware vendors to interoperate. IBM offers the IBM Tivoli Key Lifecycle Manager (TKLM v2) for Windows, Linux, AIX and Solaris operating systems, and the IBM Security Key Lifecycle Manager (v1.1) for z/OS.
Encrypting data at rest can be done several ways, by the application at the host server, in a SAN-based switch, or at the storage system itself. I presented how IBM Tivoli Storage Manager, the IBM SAN32B-E4 SAN switch, and various disk and tape devices accomplish this level of protection.
NAS @ IBM
Rich Swain, IBM Field Technical Sales Specialist for NAS solutions, provided an overview of IBM's NAS strategy and the three products: Scale-Out Network Attached Storage (SONAS), Storwize V7000 Unified, and N series.
IBM System Networking Convergence CEE/DCB/FCoE
Mike Easterly, IBM Global Field Marketing Manager for IBM System Networking, presented on Network convergence. He wants to emphasize that "Convergence is not just FCoE!" rather it is bringing together FCoE with iSCSI, CIFS, NFS and other Ethernet-based protocols. In his view, "All roads lead to Ethernet!"
There are a lot new standards that didn't exist a few years ago, such as PCI-SIG's Single Root I/O Virtualization [SR-IOV], Virtual Ethernet Port Aggregator [VEPA], and [VN-Tag], Data Center Bridging [DCB], Layer-2 Multipath [L2MP], and my favorite: Transparent Interconnect of Lots of Links [TRILL].
Last year, IBM acquired Blade Network Technologies (BNT), which was the company that made IBM BladeCenter's Advanced Management Module (AMM) and BladeCenter Open Fabric Manager (BOFM). BNT also makes Ethernet switches, so it has been merged with IBM's System Storage team, forming the IBM System Storage and Networking team. Most of today's 10GbE is either fiber optic, Direct Attach Copper (DAC) that supports up to 8.5 meter length cables, or 10GBASE-T which provides longer distances of twisted pair. IBM's DS3500 uses 10GBASE-T for its 10GbE iSCSI support.
Last month, IBM announced 40GbE! I missed that one. The IT industry also expects to deliver 100GbE by 2013. For now, these will be used as up-links between other switches, as most servers don't have the capacity to pump this much data through their buses. With 40GbE and 100GbE, it would be hard to ignore Ethernet as the common network standard to drive convergence.
Fibre Channel, such as FCP and FICON, are still the dominant storage networking technology, but this is expected to peak around 2013 and start declining thereafter in favor of iSCSI, NAS and FCoE technologies. Already the enhancements like "Priority-based Flow Control" made to Ethernet to support FCoE have also helped out iSCSI and NAS deployments as well.
The iSCSI protocol is being used with Microsoft Exchange, PXE Boot, Server virtualization hypervisors like VMware and Hyper-V, as well as large Database and OLTP. IBM's SVC, Storwize V7000, XIV, DS5000, DS3500 and N series all support iSCSI.
IBM's [RackSwitch] family of products can help offload traffic at $500 per port, compared to traditional $2000 per port for IBM SAN32B or Cisco Nexus5000 converged top-of-rack switches.
IBM's System Networking strategy has two parts. For Ethernet, offer its own IBM System Networking product line as well as continue its partnership with Juniper Networks. For Fibre Channel and FCoE, continue strategic partnerships with Brocade and Cisco. IBM will lead the industry, help drive open standards to adopt Converged Enhanced Ethernet (CEE), provide flexibility and validate data center networking solutions that work end-to-end.
IBM Storage Strategy for the Smarter Computing Era
I presented this session on Thursday morning. It is a session I give frequently at the IBM Tucson Executive Briefing Center (EBC). IBM launched [Smarter Computing initiative at IBM Pulse conference]. My presentation covered the role of storage in Business Analytics, Workload Optimized Systems, and Cloud Computing.
Layer 8: Cloud Computing and the new IT Delivery Model
Ed Batewell, IBM Field Technical Support Specialist, presented this overview on Cloud Computing. The "Layer 8" is a subtle reference to the [7-layer OSI Model] for networking protocols. Ed cites insights from the [2011 IBM Global CIO Survey]. Of the 3000 companies surveyed, 60 percent plan to use or deploy clouds. In USA, 70 percent of CIOs have significant plans for cloud within the next 3-5 years. These numbers are double the statistics gleamed from the 2009 Global CIO survey. Clouds are one of IBM's big four initiatives, expecting to generate $7 Billion USD annual revenues by 2015.
IBM is recognized in the industry as one of "Big 5" vendors (Google, Yahoo, Microsoft, and Amazon round out the rest). As such, IBM has contributed to the industry a set of best practices known as the [Cloud Computing Reference Architect (36-page document)]. As is typical for IBM, this architecture is end-to-end complete, covering the three main participants for successful cloud deployments:
Consumers: the people and systems that use cloud computing services
Providers: the people, infrastructure and business operations needed to deliver IT services to consumers
Developers: the people and their development tools that create apps and platforms for cloud computing
IBM is working hard to eliminate all barriers to adoption for Cloud Computing. [Mirage image management] can patch VM images offline to address "Day 0" viruses. [Hybrid Cloud Integrator can help integrate new Cloud technologies to legacy applications. [IBM Systems Director VMcontrol] can manage VM images from z/VM on the mainframe, to PowerVM on UNIX servers, to VMware, Microsoft, Xen and KVM for x86 servers. IBM's [Cloud Service Provider Platform (CSP2)] is designed for Telecoms to offer Cloud Computing services. IBM CloudBurst is a "Cloud-in-a-Can" optimized stack of servers, storage and switches that can be installed in five days and comes in various "tee-shirt sizes" (Small, Medium, Large and Extra Large), depending on how many VMs you want to run.
Ed mentioned that companies trying to build their own traditional IT applications and environments, in an effort to compete against the cost-effective Clouds, reminded him of Thomas Thwaites' project of building a toaster from scratch. You can watch the [TED video, 11 minutes]:
An interesting project is [Reservoir] which IBM is working with other industry leaders to develop a way to seamlessly migrate VMs from one location to another, globally, without requiring shared storage, SAN zones or Ethernet subnets. This is similar to how energy companies buy and sell electricity to each other, as needed, or the way telecommunications companies allow roaming acorss each others networks.
IBM System Networking - Convergence
Jeff Currier, IBM Executive Consultant for the new IBM System Networking group, presented this session on Network Convergence. Storage is expected to grow 44x, from 0.8 [Zettabytes] in 2009, to 35 Zetabytes by the year 2020. The role of the network is growing in importance. IBM refers to this converged loss-less Ethernet network as "Convergence Enhanced Ethernet" (CEE), which Cisco uses the term "Data Center Ethernet" (DCE), and the rest of the industry uses "Data Center Bridging" (DCB).
To make this happen, we need to replace Spanning Tree Protocol [STP] that eliminates walking in circles in a multi-hop network configuration, with a new Layer 2 Multipathing (L2MP) protocol. The two competing for the title are Shortest Path Bridging (IEEE 802.1aq) and Transparent Interconnect of Lots of Links (IETF TRILL).
All roads lead to Ethernet. While FCoE has not caught on as fast as everyone hoped, iSCSI has benefited from all the enhancements to the Ethernet standard. iSCSI works in both lossy and lossless versions of Ethernet, and seems to be the preferred choice for new greenfield deployments for Small and Medium sized Businesses (SMB). Larger enterprises continue to use Fibre Channel (FCP and FICON), but might use single-hop FCoE from the servers to top-of-rack switches. Both iSCSI and FCoE scale well, but FCoE is considered more efficient.
IBM has a strategy, and is investing heavily in these standards, technologies, and core competencies.
I always try to catch a session from Jim Blue, who works in our "SAN Central" center of competency team. This session was a long list of useful hints and tips, based on his many years of experience helping clients.
SAN Zoning works by inclusion, limiting the impact of failing devices. The best approach is to zone by individual initiator port. The default policy for your SAN zoning should be "deny".
Ports should be named to identify who, what, where and how.
While many people know not to mix both disk and tape devices on the same HBA, Jim also recommends not mixing dissimilar disks, test and production, FCP and FICON.
The sweet spot is FOUR paths. Too many paths can impact performance.
When making changes to redundant fabrics, make changes to the first fabric, then allow sufficient time before making the same changes to the other fabric.
Use software tools like Tivoli Storage Productivity Center (Standard Edition) to validate all changes to your SAN fabric.
Do not mix 62.5 and 50.0 micron technology.
Use port caps to disable inactive ports. In one amusing anecdote, he mention that an uncovered port was hit by sunlight every day, sending error messages that took a while to figure out.
Save your SAN configuration to non-SAN storage for backup
Consider firmware about two months old to be stable
Rule of thumb for estimating IOPS: 75-100 IOPS per 7200 RPM drive, 120-150 IOPS per 10K RPM drive, and 150-200 IOPS per 15K RPM drive.
Decide whether your shop is just-in-time or just-in-case provisioning. Just-in-time gets additional capacity on demand as needed, and just-in-case over-provisions to avoid scrambling last minute.
Avoid oversubscribing your inter-switch links (ISL). Aim for around 7:1 to 10:1 ratio.
Don't go cheap on bandwidth between sites for long-distance replication
Next Generation Network Fabrics - Strategy and Innovations
Mike Easterly, IBM Director of Global Field Marketing, presented IBM System Networking strategy, in light of IBM's recent acquisition of Blade Network Technologies (BNT). BNT is used in 350 of the Fortune 500 companies, and is ranked #2 behind Cisco in sales of non-core Ethernet switches (based on number of units sold).
Based on a recent survey, companies are upgrading their Ethernet networks for a variety of reasons:
56 percent for Live Partition Mobility and VMware Vmotion
45 percent for integrated compute stacks, like IBM CloudBurst
43 percent for private, public and hybrid cloud computing deployments
40 percent for network convergences
Many companies adopt a three-level approach, with core directors, distribution switches, and then access switches at the edge that connect servers and storage devices. IBM's BNT allows you to flatten the network to lower latency by collapsing the access and distribution levels into one.
IBM's strategy is to focus on BNT for the access/distribution level, and to continue its strategic partnerships for the core level.
IBM BNT provides better price/performance and lower energy consumption. To help with hot-aisle/cold-aisle rack deployments, IBM BNT provides both F and R models. F models have ports on the front, and R models have ports in the rear.
IBM BNT supports virtual fabric and HW-offload iSCSI traffic, and future-enabled for FCoE. Support for TRILL (transparent interconnect of lots of links) and OpenFlow will be implemented through software updates to the switches.
While Cisco Nexus 1000v is focused on VMware Enterprise Plus, IBM BNT's VMready works with VMware, Hyper-V, Linux KVM, XEN, OracleVM, and PowerVM. This allows single pane of management of VMready and ESX vSwitches.
In preparation for Converged Enhanced Ethernet (CEE), IBM BNT will provide full 40GbE support sometime next year, and offer switches that support 100GbE uplinks. IBM offers extended length cables, including passive SFP+ DAC at 8.5 meters, and 10Gbase-T Cat7 cables up to 100 meters.
Inter-datacenter Workload Mobility with VMware vSphere and SAN Volume Controller (SVC)
This session was co-presented between Bill Wiegand, IBM Advanced Technical Services, and Rawley Burbridge, IBM VMware and midrange storage consultant. IBM is the leader in storage virtualization product (SVC), and is the leading reseller of VMware.
Like MetroCluster on IBM N series, or EMC's VPLEX Metro, the IBM SAN Volume Controller can support a stretched cluster across distance that allows virtual machines to move seamlessly from one datacenter to another. This is a feature IBM introduced with SVC 5.1 back in 2009. This can be used for PowerVM Live Partition Mobility, VMware vMotion, and Hyper-V Quick Migration.
SVC stretched cluster can help with both Disaster Avoidance and Disaster Recovery. For Disaster Avoidance, in anticipation of an outage, VMs can be moved to the secondary datacenter. For Disaster Recover, additional automation, such as VMware High Availability (HA) is needed to restart the VMs at the secondary datacenter.
IBM stretched cluster is further improved with a feature called Volume Mirroring (formerly vDisk Mirroring) which creates two physical copies of one logical volume. To the VMware ESX hosts, there is only one volume, regardless of which datacenter it is in. The two physical copies can be on any kind of managed disk, as there is no requirement or dependency of copy services on the back-end storage arrays.
Another recent improvement is the idea of spreading the three quorum disks to three different locations or "failure domains". One in each data center, and a third one in a separate building, somewhere in between the other two, perhaps.
Of course, there are regional disasters that could affect both datacenters. For this reason, SVC stretched cluster volumes can be replicated to a third location up to 8000 km away. This can be done with any back-end disk arrays, as again there is not requirement for copy services from the managed devices. SVC takes care of it all.
Networking is going to be very important for a variety of transformational projects going forward in the next five years.
Mastering the art of stretching out a week-long event into two weeks' worth of blog posts, I continue my
coverage of the [Data Center 2010 conference], Tuesday afternoon I attended several sessions that focused on technologies for Cloud Computing.
(Note: It appears I need to repeat this. The analyst company that runs this event has kindly asked me not to mention their name on this blog, display any of their logos, mention the names of any of their employees, include photos of any of their analysts, include slides from their presentations, or quote verbatim any of their speech at this conference. This is all done to protect and respect their intellectual property that their members pay for. The pie charts included on this series of posts were rendered by Google Charting tool.)
Converging Storage and Network Fabrics
The analysts presented a set of alternative approaches to consolidating your SAN and LAN fabrics. Here were the choices discussed:
Fibre Channel over Ethernet (FCoE) - This requires 10GbE with Data Center Bridging (DCB) standards, what IBM refers to as Converged Enhanced Ethernet (CEE). Converged Network Adapters (CNAs) support FC, iSCSI, NFS and CIFS protocols on a single wire.
Internet SCSI (iSCSI) - This works on any flavor of Ethernet, is fully routable, and was developed in the 1990s by IBM and Cisco. Most 1GbE and all 10GbE Network Interface Cards (NIC) support TCP Offload Engine (TOE) and "boot from SAN" capability. Native suppot for iSCSI is widely available in most hypervisors and operating systems, including VMware and Windows. DCB Ethernet is not required for iSCSI, but can be helpful. Many customers keep their iSCSI traffic in a separate network (often referred to as an IP SAN) from the rest of their traditional LAN traffic.
Network Attached Storage (NAS) - NFS and CIFS have been around for a long time and work with any flavor of Ethernet. Like iSCSI, DCB is not required but can be helpful. NAS went from being for files only, to be used for email and database, and now is viewed as the easiest deployment for VMware. Vmotion is able to move VM guests from one host to another within the same LAN subnet.
Infiniband or PCI extenders - this approach allows many servers to share fewer number of NICs and HBAs. While Infiniband was limited in distance for its copper cables, recent advances now allow fiber optic cables for 150 meter distances.
Interactive poll of the audience offered some insight on plans to switch from FC/FICON to Ethernet-based storage:
Interactive poll of the audience offered some insight on what portion storage is FCP/FICON attached:
Interactive poll of the audience offered some insight on what portion storage is Ethernet-attached:
Interactive poll of the audience offered some insight on what portion of servers are already using some Ethernet-attached storage:
Each vendor has its own style. HP provides homogeneous solutions, having acquired 3COM and broken off relations with Cisco. Cisco offers tight alliances over closed proprietary solutions, publicly partnering with both EMC and NetApp for storage. IBM offers loose alliances, with IBM-branded solutions from Brocade and BNT, as well as reselling arrangements with Cisco and Juniper. Oracle has focused on Infiniband instead for its appliances.
The analysts predict that IBM will be the first to deliver 40 GbE, from their BNT acquisition. They predict by 2014 that Ethernet approaches (NAS, iSCSI, FCoE) will be the core technology for all but the largest SANs, and that iSCSI and NAS will be more widespread than FCoE. As for cabling, the analysts recommend copper within the rack, but fiber optic between racks. Consider SAN management software, such as IBM Tivoli Storage Productivity Center.
The analysts felt that the biggest inhibitor to merging SAN and LANs will be organizational issues. SAN administrators consider LAN administrators like "Cowboys" undisciplined and unwilling to focus on 24x7 operational availability, redundancy or business continuity. LAN administrators consider SAN administrators as "Luddites" afraid or unwilling to accept FCoE, iSCSI or NAS approaches.
Driving Innovation through Innovation
Mr. Shannon Poulin from Intel presented their advancements in Cloud Computing. Let's start with some facts and predictions:
There are over 2.5 billion photos on Facebook, which runs on 30,000 servers
30 billion videos viewed every month
Nearly all Internet-connected devices are either computers or phones
An additional billion people on the Internet
Cars, televisions, and households will also be connected to the Internet
The world will need 8x more network bandwidth, 12x more storage, and 20x more compute power
To avoid confusion between on-premise and off-premise deployments, Intel defines "private cloud" as "single tenant" and "public cloud" as "multi-tenant". Clouds should be
automated, efficient, simple, secure, and interoperable enough to allow federation of resources across providers. He also felt that Clouds should be "client-aware" so that it know what devices it is talking to, and optimizes the results accordingly. For example, if watching video on a small 320x240 smartphone screen, it makes no sense for the Cloud server to push out 1080p. All devices are going through a connected/disconnected dichotomy. They can do some things while disconnected, but other things only while connected to the Internet or Cloud provider.
An internal Intel task force investigated what it would take to beat MIPS and IBM POWER processors and found that their own Intel chips lacked key functionality. Intel plans to address some of their shortcomings with a new chip called "Sandbridge" sometime next year. They also plan a series of specialized chips that support graphics processing (GPU), network processing (NPU) and so on. He also mentioned Intel released "Tukwilla" earlier this year, the latest version of Itanium chip. HP is the last major company to still use Itanium for their servers.
Shannon wrapped up the talk with a discussion of two Cloud Computing initiatives. The first is [Intel® Cloud Builders], a cross-industry effort to build Cloud infrastructures based on the Intel Xeon chipset. The second is the [Open Data Center Alliance], comprised of leading global IT managers who are working together to define and promote data center requirements for the cloud and beyond.
The analysts feel that we need to switch from thinking about "boxes" (servers, storage, networks) to "resources". To this end, they envision a future datacenter where resources are connected to an any-to-any fabric that connects compute, memory, storage, and networking resources as commodities. They feel the current trend towards integrated system stacks is just a marketing ploy by vendors to fatten their wallets. (Ouch!)
A new concept to "disaggregate" caught my attention. When you make cookies, you disaggregate a cup of sugar from the sugar bag, a teaspoon of baking soda from the box, and so on. When you carve a LUN from a disk array, you are disaggregating the storage resources you need for a project. The analysts feel we should be able to do this with servers and network resources as well, so that when you want to deploy a new workload you just disaggregate the bits and pieces in the amounts you actually plan to use and combine them accordingly. IBM calls these combinations "ensembles" of Cloud computing.
Very few workloads require "best-of-breed" technologies. Rather, this new fabric-based infrastructure recognizes the reality that most workloads do not. One thing that IT Data Center operations can learn from Cloud Service Providers is their focus on "good enough" deployment.
This means however that IT professionals will need new skill sets. IT administrators will need to learn a bit of application development, systems integration, and runbook automation. Network adminis need to enter into 12-step programs to stop using Command Line Interfaces (CLI). Server admins need to put down their screwdrivers and focus instead on policy templates.
Whether you deploy private, public or hybrid cloud computing, the benefits are real and worth the changes needed in skill sets and organizational structure.
Continuing on the [IBM Storage Launch of February 9], John Sing has offered to write the following guest post about the [announcement] of IBM Scale Out Network Attached Storage [IBM SONAS]. John and I have known each other for a while, traveled the world to work with clients and speak at conferences. He is an Executive IT Consultant on the SONAS team.
Guest Post written by John Sing, IBM San Jose, California
What is IBM SONAS? It’s many things, so let’s start with this list:
It’s IBM’s delivery of a productized, pre-packaged Scale Out NAS global virtual file server, delivered in a easy-to-use appliance
IBM’s solution for large enterprise file-based storage requirements, where massive scale in capacity and extreme performance is required, especially for today’s modern analytics-based Competitive Advantage IT applications
Scales to many petabytes of usable storage and billions of files in a single global namespace
Provides integrated central management, central deployment of petabyte levels of storage
Modular commercial-off-the-shelf [COTS] building blocks. I/O, storage, network capacity scale independently of each other. Up to 30 interface nodes and 60 storage nodes, in an IBM General Parallel File System [GPFS]-based cluster. Each 10Gb CEE interface node port is capable of streaming at 900 MB/sec
Files are written in block-sized chunks, striped over as many multiple disk drives in parallel – aggregating throughput on a massive scale (both read and write), as well as providing auto-tuning, auto-balancing
Functionality delivered via one program product, IBM SONAS Software, which provides all of above functions, along with clustered CIFS, NFS v2/v3 with session auto-failover, FTP, high availability, and more
IBM SONAS makes automated tiered storage achievable and realistic at petabyte levels:
Integrated high performance parallel scan engine capable of identifying files at over 10 million files per minute per node
Integrated parallel data movement engine to physically relocate the data within tiered storage
And we’re just scratching the surface. IBM has plans to deploy additional protocols, storage hardware options, and software features.
However, the real question of interest should be, “who really needs that much storage capacity and throughput horsepower?”
The answer may surprise you. IMHO, the answer is: almost any modern enterprise that intends to stay competitive. Hmmm…… Consider this: the reason that IT exists today is no longer to simply save cost (that may have been true 10 years ago). Everyone is reducing cost… but how much competitive advantage is purchased through “let’s cut our IT budget by 10% this year”?
Notice that in today’s world, there are (many) bright people out there, changing our world every day through New Intelligence Competitive Advantage analytics-based IT applications such as real time GPS traffic data, real time energy monitoring and redirection, real time video feed with analytics, text analytics, entity analytics, real time stream computing, image recognition applications, HDTV video on demand, etc. Think of how GPS industry, cell phone / Twitter / Facebook, iPhone and iPad applications, as examples, are creating whole new industries and markets almost overnight.
Then start asking yourself, “What's behind these Competitive Advantage IT applications – as they are the ones that are driving all my storage growth? Why do they need so much storage? What do those applications mean for my storage requirements?”
To be “real-time”, long-held IT paradigms are being broken every day. Things like “data proximity”: we can no longer can extract terabytes of data from production databases and load them to a data warehouse – where’s the “real-time” in that? Instead, today’s modern analytics-based applications demand:
Multiple processes and servers (sometimes numbering in the 100s) simultaneously ….
Running against hundreds of terabytes of data of live production data, streaming in from expanding number of smarter sensors, input devices, users
Producing digital image-intensive results that must be programatically sent to an ever increasing number of mobile devices in geographically dispersed storage
Requiring parallel performance levels, that used to be the domain only of High Performance Computing (HPC)
This is a major paradigm shift in storage – and that is the solution and storage capabilities that IBM SONAS is designed to address. And of course, you should be able to save significant cost through the SONAS global virtual file server consolidation and virtualization as well.
Certainly, this topic warrants more discussion. If you found it interesting, contact me, your local IBM Business Partner or IBM Storage rep to discuss Competitive Advantage IT applications and SONAS further.
Well, it's Tuesday again, and that means IBM announcements! Today we had a major launch, with so many products, services and offerings
that I can't fit them all into a single post, so I will split them up into several posts to give the attention they deserve. So, in this
post, I will focus on just the networking gear.
IBM Converged Switch B32
The "Converged" part of this switch refers to Converged Enhanced Ethernet (CEE), which is just a lossless Ethernet that meets certain standards to allow Fibre Channel over Ethernet (FCoE) that are still being discussed between Brocade and Cisco. Thankfully, IBM demanded both Brocade and Cisco stick to open agreed-upon standards, and the rest of the world gets to benefit from IBM's leadership in keeping everything as open and non-proprietary as possible.
The B32 ("B" because it was made by Brocade) starts with 24 10Gb Converged Enhanced Ethernet (CEE) ports, and then you can add eight Fibre Channel ports, for a total of 32 ports, hence the name B32. These are designed to be Top-of-Rack (TOR) switches. Basically, instead of having expensive optical cables for Ethernet and/or Fibre Channel out of each server, you have cheap twinax copper cables connecting the server's Converged Network Adapters (CNA) to this TOR switch, and then you can have the 10Gb Ethernet go to your regular Ethernet LAN, and your 8Gbps FC traffic go to your regular FC SAN. In other words, the CNA serves both the role of an Ethernet Network Interface Card (NIC) as well as a Fibre Channel Host Bus Adapter (HBA) card.
(You might see 8Gbps Fibre Channel represented as 8/4/2 or 2/4/8, this is just to remind you that these 8Gb FC ports can auto-negotiate down to 2Gbps and 4Gbps legacy hardware, but not 1Gbps. If you are still using 1Gbps FC, you need 4Gpbs SFP transceivers instead, shown often as 1/2/4 or 4/2/1.)
New SSN-16 module for Cisco directors and switches
When I present SAN gear to sales reps, I often get the question, "What is the difference between a switch and a director?" My quick and simple answer is that switches have fixed ports, but directors have slots that you can slide in different blades or expansion modules. The Cisco MDS9500 series are directors with slots, the three models provide a hint to their capacity. The last two digits represent the number of total slots, but the first two slots are already taken. In other words, model 9513 has 11 slots, model 9509 has seven slots, and model 9506 has four slots. You can have a 48-port blade in a slot, so in theory, you can have a maximum of 528 ports on the biggest model 9513.
However, if you want FCIP for disaster recovery, or I/O Acceleration (IOA) for remote e-vaulting tape libraries, you need a special 18/4 blade. This has 18 FC ports, four 1GbE ports and a special service processor that speaks FCIP or IOA. If you wanted two service processors for FCIP and two for IOA, you would need four of these blades, and that takes up slots that could have been used for 48-port blades instead. The solution? The new SSN-16 has sixteen 1GbE ports and four service processors, so with one slot, you can handle the FCIP and IOA processing that you previously used four cards, giving you three slots back to use with higher port-density cards.
Even better, you can put this new SSN-16 in the Cisco 9222i. The model 9222i is a "hybrid" switch with 22 fixed ports (18 FC ports, four fixed 1GbE ports, and a service processor, so basically the fixed port version of the 18/4 blade above), but it also has one slot! That one slot can be used for the SSN-16 to give you added FCIP or IOA capability.
For our mainframe clients, the FICON package includes four 24-port FICON blades and 96 SFP 4Gbps transceivers to fully populate them. Here is the IBM [Press Release].
Cisco Nexus 5000 series for IBM System Storage
The Cisco Nexus 5000 series is Cisco's entry into the Converged Enhanced Ethernet world, although Cisco sometimes refers to this as Data Center Ethernet (DCE), IBM will continue to use CEE when referring to either Brocade and Cisco gear. These are also Top-of-Rack aggregators that support CNA connections over cheaper twinax copper wires. Model 5010 has 10 ports that can be configured for either 1GbE or 10Gb CEE, 10 ports that are 10Gb CEE, and a slot for an expansion module. The Model 5020 has basically twice as much of everything, including two slots instead of one. Since 10Gb Ethernet does not auto-negotiate down to 1GbE, half the ports can be configured to run 1GbE instead. Frankly, that can be seen as wasting your precious Nexus ports with 1GbE connections, so you might find a 1GbE-to-10GbE aggregator that combines a dozen or more 1GbE to a few 10GbE links instead.
Today's announcement is that in addition to 10GbE and 4Gbps FC expansion modules, there is now an expansion module that supports 8Gbps Fibre Channel. Here is the IBM [Press Release].
Whether you choose Brocade or Cisco, nearly all of IBM System Storage disk and tape products can work today with Converged Enhanced Ethernet environments, either directly using iSCSI, NFS or CIFS, or using the FCoE methodology.
As you can see, it took me a whole post just to cover just our networking gear announcements, and I haven't even covered our disk, tape and cloud storage offerings. I'll get to these in later posts.