Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is a Master Inventor and Senior IT Specialist for the IBM System Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2011, Tony celebrated his 25th year anniversary with IBM Storage on the same day as the IBM's Centennial. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
Wrapping up my coverage of the Data Center Conference 2009, the week ends with a celebration. This year we had six "Hospitality Suites" sponsored by various different vendors. Each suite has its own theme, decorations and entertainment. The first suite was VMware's "Cloud 9 Ultra Lounge" which offered blue cotton candy martinis. IBM is the leading reseller of VMware.
When the red martini liquid was poured on top of the blue cotton candy, the result was a nasty muddish brown grey color. The guy on the left chose to get the martini without the blue cotton candy. We joked that this is perhaps a good metaphor for cloud computing in general. It looks good on paper, until you actually put it all together and realize it does not look as blue and puffy as you were expecting. However, it tasted good!
Next suite was sponsored by Cisco, one of IBM's storage networking partners. Cisco also decorated in blue, as the guy Jake in the middle demonstrates.
Next suite was sponsored by Brocade, our supplier for IBM-branded networking gear. They went with a red-and-black color scheme. Sadly, many of my pictures inside involved straight jackets and unicycles, so not appropriate for this blog. However, it was easy to remember that they were talking about their "extraordinary networks". Makes you want to help out Brocade by contacting your nearest IBM storage sales rep and buy yourself a SAN768B or two.
Somewhere along the way, we picked up Hawaiian leis at the "Margaritaville" Hospitality Suite, compliments of sponsor APC by Schneider Electric. We had the best "Filet Mignon" appetizers at "Club Dedupe" by our competitor DataDomain, and some fun with my friends over at Computer Associates' "Top Gun" suite. Pictured at right are Paula Koziol with Christian Barrera from Argentina. A good time was had by all.
Continuing my coverage of the 30th annual [Data Center Conference]. Here is a recap of some of the Tuesday afternoon sessions:
Brocade: Maximizing Your Cloud: How Data Centers Must Evolve
This was a session sponsored by Brocade to promote their concept of the "Ethernet Fabric". The first speaker, John McHugh, was from Brocade, and the second speaker was a client testimonial, Jamie Shepard, EVP for International Computerware, Inc.
John had an interesting take on today's network challenges. He feels that most LANs are organized for "North-South" traffic, referring to upload/downloads between clients and servers. However, the networks of tomorrow will need to focus on "East-West" traffic, referring to servers talking to other servers.
John was also opposed to integrated stacks that combine servers, storage and networking into a single appliance, as this prevents independent scaling of resources.
The Future of Backup is Not Backup
Primary data is growing at 40 to 60 percent compound annual growth rate (CAGR), but backup data is growing faster. Why? Because data that was not backed up before are now being backed up, including test data, development data, and mobile application data.
Backup costs are 19x more expensive than production software costs. There is an enormous gap in data protection because companies fail to factor this into their budgets. It is not uncommon for IT departments to use multiple backup tools, for example one tool for VMs, and another tool for servers, and a third product for desktops.
part of the problem is identifying who "buys" the backup software. The server team might focus on the operating systems supported. The storage team focuses on the disk and tape media supported. The application owners focus on the features and capabilities for backup that minimize impact to their application.
The analyst organized these issues into three "C's" of backup concerns: Cost, Capability and Complexity. Cost is not just the software license fee for the backup software, but the cost of backup media, courier fees, and transmisison bandwidth. Capability refers to the features and functions, and IT folks are tired of having to augment their backup solution with additional tools and scripts to compensate for lack of capability. Complexity refers to the challenges trying to get existing backup software to tackle new sources like Virtual Machines, Mobile apps, and so on.
Has everyone moved to a tape-less backup system? Polling results found that people are shifting back to tape, either in a tape-only environment, or to supplement their disk or disk-based virtual tape library (VTL). Here are the polling results:
The poll also showed the top three backup software vendors were Symantec, IBM and Commvault, which is consistent with marketshare. However, the analyst feels that by 2014, an estimated 30 percent of companies will change their backup softwar vendor out of frustration over cost, capability and/or complexity.
There are a lot new backup software products specific to dealing with Virtual Machines. Some are focused exclusively on VMware. When asked what tool people used to backup their VMs, the polling results showed the following. NOte that 20 percent for Other includes products from major vendors, like IBM Tivoli Storage Manager for Virtual Environments, as the analyst was more interested in the uptake of backup software from startups.
Some companies are considering Cloud Computing for backup. This is one area where having the cloud service provider at a distance is an actual advantage for added protection. A poll asking whether some or most data is backed up to the Cloud, either already today, or plans for the near future within the next 12 or 24 months, showed the following:
In addition to backup service providers, there are now several startups that offer file sharing, and some are adding "versioning" to this that can serve as an alternative to backup. These include DropBox, SugarSync, iCloud, SpiderOak and ShareFile.
The final topic was Snapshot and Disk Replication. These tend to be hardware-based, so they may not have options for versioning, scheduling, or application-aware capabilities normally associated with backup software. Space-efficient snapshots, which point unchanged data back to the original source, may not provide full data protection that disparate backup copies would provide. Here were polling results on whether snapshot/replication was used to augment or replace some or most of their backups:
Some of his observations and recommendations:
Maintenance is more expensive than acquisition cost. Don't focus on the tip of the iceberg. Some backup software is more efficient for bandwidth and media which will save tons of money in the long run.
Try to optimize what you have. He calls this the "Starbuck's effect". If you just need one coffee, then paying $4.50 for a cup makes sense. But if you need 100 coffees, you might be better off buying the beans.
Design backups to meet service level agreements (SLAs). In the past, backup was treated as one-size-fits-all, but today you can now focus on a workload by workload basis.
Be conservative in adopting new technologies until you have your backup procedures in place to handle data protection.
Backup is for operational recovery, not long-term retention of data. A poll showed two-thirds of the audience kept backup versions for longer than 60 days! Re-evaluate how long you keep backups, and how many versions you keep. If you need long-term retention, use archive process instead.
Recovery testing is a dying art. Practice recovery procedures so that you can do it safely and correctly when it matters most.
The analyst had a series of awesome pictures of large structures, the pyramids of Giza, the Chrysler building, and so on, and how they would look without their foundations in place. Backup is a foundation and should be treated as such in all IT planning purposes.
IT is evolving, but some basic needs like networking and backup procedures don't change. As companies re-evaluate their IT operations for Big Data, Cloud Computing and other new technologies, it is best to remember that some basic needs must be met as part of those evaluations.
The keynote was led by Phil Tasker, IBM Business Unit Executive (BUE) for STG Education Programs in Growth Markets, then Joe Screnci, head of IBM Storage Sales for Australia. IBM is in the Top 10 Training Hall of Fame, and conducts over 40,000 classes worldwide, resulting in over 1.3 million student days of instructions. IBM Systems Lab and Training technical hosts over three dozen conferences like this one every year.
Next was Clod Barrera, Distinguished Engineer and Chief Technical Strategist for the IBM System Storage product line. He covered future trends in storage as they relate to IBM's Smarter COmputing initiative.
Storage for the Clouds
Clod Barrera presented this break-out session on Cloud Storage. He covered why clouds matter, the various types and purposes of cloud, technology and architectures, and where IBM is headed to support this trend.
Storage for Cloud computing was $1 Billion USD business in 2010, and is expected to grow 32 percent CAGR through, compared to 3.8 percent for non-cloud storage. Clod estimates that 10 to 15 percent of all storage will be in cloud deployments by 2015. Of this storage, analysts expect 50 percent in private clouds, and the other 50 percent in public clouds. For private clouds, clients are looking to "Cloudify" their existing IT infrastructures. For public clouds, the projects are mostly green field.
IBM is also looking to the "arms dealer" of choice for Telcos and other companies looking to launch their own Cloud Services. IBM has a Cloud Services Provider Platform (CSP2) specifically to provide all the tools and technologies needed to make this possible.
Last month, IBM launched several new solutions for Cloud. The IBM Starter Kit for Cloud will help existing IT environments adopt cloud technologies. The IBM Service Agility Accelerator for Cloud is available for more advanced deployments. IBM Service Delivery Manager (ISDM) integrates a collection of software to provide complete integrated service management. IBM CloudBurst provides an integrated hardware-and-software stack for both x86 and POWER chipsets.
Multi-tenancy is also a big issue, and this varies depending on deployment model: IaaS, PaaS, or SaaS. Multi-tenancy is needed to help divide up management tasks, and to ensure that shared resources are paid for and meet SLA requirements accordingly.
Clod feels there are good reasons to use high performance, transactional SAN storage for VMware environments, versus NAS which many people consider simpler to deploy. IBM is also active in open standards, including SNIA's Cloud Data Management Interface [CDMI].
Journey to the Private Cloud
Gary Luke from Brocade provided this session on IBM's SAN384B-2 and SAN768B-2 SAN directors. Brocade is one of IBM's suppliers for SAN switches, and thanks to TRILL being adopted last August by IETF, supports multi-hop FCoE configurations! However, Gary did not talk about FCoE, but rather native FCP and FICON support in these new directors.
According to VMware, only 30 percent of x86 workloads are virtualized by any hypervisor. Gary feels that server virtualization and the use of Solid-State Drives (SSD) in disk arrays are driving existing 8 Gbps SAN to upgrade to 16 Gbps. Gary feels that Fibre-Channel based SANs are best positioned to handle unpredictable peaks in a 24-by-7 world.
The SAN384B-2 can house up to 256 ports (8 Gbps) or 192 ports (16 Gbps) in four slots, 9U chassis. The SAN768B-2 can handle twice these, in a 12U chassis. The nice thing about the 16Gbps ports is that they can auto-negotiate down to 10, 8, 4 and 2 Gbps. This is far better than typical N-2 support, often referred to as the speeds supported, such as 4/2/1 and 8/4/2. An upcoming FOS release will allow people with previous generation SAN384B-1/SAN768B-1 directors to move their 8Gbps blades over to the new SAN384B-2/SAN768B-2 generation models.
Since most CWDM and DWDM only support maximum 10 Gbps FC and 10GbE, Brocade's 16Gbps can automatically drop down to 10 Gbps for direct attachment to CWDM/DWDM, rather than having a step-down box normally required.
A major advancement is the change from copper to optical "Inter-Chassis Links" (ICL). Unlike Inter-switch links (ISL) that use up SAN ports on each box, the ICL is faster, more efficient and does not consume ports. Normally, clients would connect two directors together, but now you can connect up to six chassis together! For example, you can have four SAN368B-2 connected to your host servers, ICL attached to two SAN768B-2, that are then connected to your disk and tape storage devices. The fiber optic ICL allow for up to 50 meters distance. Combining six chassis together would allow the complex to support over 3,000 ports (8 Gbps) or 2,300 ports (16 Gbps).
The SAN384B-2 and SAN768B-2 supports "virtual SAN" logical switches, traffic isoliation (TI) zones, fabric-assigned WWNNs, and fabric-based QoS.
Lastly, Brocade offers a free utility called [SANhealth] that will gather data from your b-type, m-type and even Cisco MDS-based SAN. The data can then be sent to Brocade for analysis, and Brocade will then email back some nice Visio graphs, spreadsheets and other analysis results on the health of your SAN.
Well, it's Tuesday again, and you know what that means! IBM Announcements!
Today, IBM announced its latest IBM Tivoli Key Lifecycle Manager (TKLM) 2.0 version. Here's a quick recap:
Centralized Key Management
Centralized and simplified encryption key management through Tivoli Key Lifecycle Manager's lifecycle of creation, storage, rotation, and protection of encryption keys and key serving through industry standards. TKLM is available to manage the encryption keys for LTO-4, LTO-5, TS1120 and TS1130 tape drives enabled for encryption, as well as DS8000 and DS5000 disk systems using Full Disk Encryption (FDE) disk drives.
Partitioning of Access Control for Multitenancy
Access control and partitioning of the key serving functions, including end-to-end authentication of encryption clients and security of exchange of encryption keys, such that groups of devices have different sets of encryption keys with different administrators. This enables [multitenancy] or multilayer security of a shared infrastructure using encryption as an enforcement mechanism for access control. As Information Technology shifts from on-premises to the cloud, multitenancy will become growingly more important.
Support for KMIP 1.0 Standard
Support for the new key management standard, Key Management Interoperability Protocol (KMIP), released through the Organization for the Advancement of Structured Information Standards [OASIS]. This new standard enables encryption key management for a wide variety of devices and endpoints. See the
[22-page KMIP whitepaper] for more information.
As much as I like to poke fun at Oracle, with hundreds of their Sun/StorageTek clients switching over to IBM tape solutions every quarter, I have to give them kudos for working cooperatively with IBM to come up with this KMIP standard that we can both support.
Support for non-IBM devices from Emulex, Brocade and LSI
Support for IBM self-encrypting storage offerings as well as suppliers of IT components which support KMIP, including a number of supported non-IBM devices announced by business partners such as Emulex, Brocade, and LSI. KMIP support permits you to deploy Tivoli Key Lifecycle Manager without having to worry about being locked into a proprietary key management solution. If you are a client with multiple "Encryption Key Management" software packages, now is a good time to consolidate onto IBM TKLM.
Role-based access control for administrators that allows multiple administrators with different roles and permissions to be defined, helping increase the security of sensitive key management operations and better separation of duties. For example, that new-hire college kid might get a read-only authorization level, so that he can generate reports, and pack the right tapes into cardboard boxes. Meanwhile, for that storage admin who has been running the tape operations for the past ten years, she might get full access. The advantage of role-based authorization is that for large organizations, you can assign people to their appropriate roles, and you can designate primary and secondary roles in case one has to provide backup while the other is out of town, for example.
Well, it's Tuesday again, and that means IBM announcements! Today we had a major launch, with so many products, services and offerings
that I can't fit them all into a single post, so I will split them up into several posts to give the attention they deserve. So, in this
post, I will focus on just the networking gear.
IBM Converged Switch B32
The "Converged" part of this switch refers to Converged Enhanced Ethernet (CEE), which is just a lossless Ethernet that meets certain standards to allow Fibre Channel over Ethernet (FCoE) that are still being discussed between Brocade and Cisco. Thankfully, IBM demanded both Brocade and Cisco stick to open agreed-upon standards, and the rest of the world gets to benefit from IBM's leadership in keeping everything as open and non-proprietary as possible.
The B32 ("B" because it was made by Brocade) starts with 24 10Gb Converged Enhanced Ethernet (CEE) ports, and then you can add eight Fibre Channel ports, for a total of 32 ports, hence the name B32. These are designed to be Top-of-Rack (TOR) switches. Basically, instead of having expensive optical cables for Ethernet and/or Fibre Channel out of each server, you have cheap twinax copper cables connecting the server's Converged Network Adapters (CNA) to this TOR switch, and then you can have the 10Gb Ethernet go to your regular Ethernet LAN, and your 8Gbps FC traffic go to your regular FC SAN. In other words, the CNA serves both the role of an Ethernet Network Interface Card (NIC) as well as a Fibre Channel Host Bus Adapter (HBA) card.
(You might see 8Gbps Fibre Channel represented as 8/4/2 or 2/4/8, this is just to remind you that these 8Gb FC ports can auto-negotiate down to 2Gbps and 4Gbps legacy hardware, but not 1Gbps. If you are still using 1Gbps FC, you need 4Gpbs SFP transceivers instead, shown often as 1/2/4 or 4/2/1.)
New SSN-16 module for Cisco directors and switches
When I present SAN gear to sales reps, I often get the question, "What is the difference between a switch and a director?" My quick and simple answer is that switches have fixed ports, but directors have slots that you can slide in different blades or expansion modules. The Cisco MDS9500 series are directors with slots, the three models provide a hint to their capacity. The last two digits represent the number of total slots, but the first two slots are already taken. In other words, model 9513 has 11 slots, model 9509 has seven slots, and model 9506 has four slots. You can have a 48-port blade in a slot, so in theory, you can have a maximum of 528 ports on the biggest model 9513.
However, if you want FCIP for disaster recovery, or I/O Acceleration (IOA) for remote e-vaulting tape libraries, you need a special 18/4 blade. This has 18 FC ports, four 1GbE ports and a special service processor that speaks FCIP or IOA. If you wanted two service processors for FCIP and two for IOA, you would need four of these blades, and that takes up slots that could have been used for 48-port blades instead. The solution? The new SSN-16 has sixteen 1GbE ports and four service processors, so with one slot, you can handle the FCIP and IOA processing that you previously used four cards, giving you three slots back to use with higher port-density cards.
Even better, you can put this new SSN-16 in the Cisco 9222i. The model 9222i is a "hybrid" switch with 22 fixed ports (18 FC ports, four fixed 1GbE ports, and a service processor, so basically the fixed port version of the 18/4 blade above), but it also has one slot! That one slot can be used for the SSN-16 to give you added FCIP or IOA capability.
For our mainframe clients, the FICON package includes four 24-port FICON blades and 96 SFP 4Gbps transceivers to fully populate them. Here is the IBM [Press Release].
Cisco Nexus 5000 series for IBM System Storage
The Cisco Nexus 5000 series is Cisco's entry into the Converged Enhanced Ethernet world, although Cisco sometimes refers to this as Data Center Ethernet (DCE), IBM will continue to use CEE when referring to either Brocade and Cisco gear. These are also Top-of-Rack aggregators that support CNA connections over cheaper twinax copper wires. Model 5010 has 10 ports that can be configured for either 1GbE or 10Gb CEE, 10 ports that are 10Gb CEE, and a slot for an expansion module. The Model 5020 has basically twice as much of everything, including two slots instead of one. Since 10Gb Ethernet does not auto-negotiate down to 1GbE, half the ports can be configured to run 1GbE instead. Frankly, that can be seen as wasting your precious Nexus ports with 1GbE connections, so you might find a 1GbE-to-10GbE aggregator that combines a dozen or more 1GbE to a few 10GbE links instead.
Today's announcement is that in addition to 10GbE and 4Gbps FC expansion modules, there is now an expansion module that supports 8Gbps Fibre Channel. Here is the IBM [Press Release].
Whether you choose Brocade or Cisco, nearly all of IBM System Storage disk and tape products can work today with Converged Enhanced Ethernet environments, either directly using iSCSI, NFS or CIFS, or using the FCoE methodology.
As you can see, it took me a whole post just to cover just our networking gear announcements, and I haven't even covered our disk, tape and cloud storage offerings. I'll get to these in later posts.