Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Tony Pearson is a Master Inventor and Senior IT Specialist for the IBM System Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2011, Tony celebrated his 25th year anniversary with IBM Storage on the same day as the IBM's Centennial. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
I have created blog categories, based on our System Storage offering matrix, which you can track individually:
Disk systems, including the IBM System Storage DS Family of products, SAN Volume Controller, N series, as well as features unique to these products, such as FlashCopy, MetroMirror, or SnapLock. Tape
Tape systems, including the IBM System Storage TS Family of products, tape-related products in the Virtualization Engine portfolio, drives, libraries and even tape media.
Storage Networking offerings, from Brocade, McData, Cisco and others, such as switches, routers and directors.
Infrastructure management, including IBM TotalStorage Productivity Center software, IBM Tivoli Provisioning Manager, IBM Tivoli Intelligent Orchestrator, and IBM Tivoli Storage Process Manager.
Business Continuity, including IBM Tivoli Storage Manager, Tivoli CDP for Files, Productivity Center for Replication software component, Continuous Availability for Windows (CAW), Continuous Availability for AIX (CAA).
Lifecycle and Retention offerings, including our IBM System Storage DR550, DR550 Express, GPFS, Tivoli Storage Manager Space Management for UNIX, Tivoli Storage Manager HSM for Windows, and DFSMS.
Storage services, including consulting, assessments, design, deployment, management and outsourcing.
In last week's System Storage Portfolio Top Gun class in Dallas, some of the students were not familiarwith Really Simple Syndication (RSS). For the uninitiated, this can be intimidating.I thought a quick overview of what I've done might help:
Chose a "feed reader". I chose Bloglines but there are many others.
Use Technorati to search other blogs for keywords or phrases I am looking for.
When I find a blog that I like to continue tracking, I "add" it to my subscription list on bloglines. Just hit "add" and copy the URL of the blog you want to track. Bloglines will figure out the RSS keywords required.I track eight blogs at the momemnt, but some people with lots of time on their hands track 20 or more. It is easy to unsubscribe, so don't be afraid to try some out for a few days.
Since I was actually going to run a blog of my own, I read a few books on the topic. One I recommend is "Naked Conversations" by Robert Scoble and Shel Israel, both experienced bloggers.
Finally, I am not big on spell checking, but most places have the option to preview your post or comment before it actually gets posted, which is not a bad idea if you use any HTML tags.
For a quick taste of blogging, consider using Data Storage Blogger Feed Reader. This has a lot of blogs on the topic of storage, already added and categorized for your convenience, ready for your perusal.
I am sure there are many other ways to enjoy the Blogosphere, but this works for me.[Read More]
A lot of people ask me about IBM branding, as we have recently changed brands. In the past we had two separate brands, one for servers (eServer) and one for storage (TotalStorage). These would be fine if we wanted to promote their independence, but customers today want synergy between servers and storage, they want systems that work well together.
Last year, in response to market feedback, we crated a new brand, "IBM Systems" and put all the server and storage product lines under one roof. Over time, we will transition from TotalStorage to System Storage naming. This will occur with new products, and major versions of existing products.
Two other phrases you will hear in the names of our offerings are "Virtualization Engine" and "Express". These are portfolio identifiers. The Virtualization Engine identifier was created to emphasize our leadership in system virtualization, and we have products that span product lines with this identifier.
The Express identifier was created to emphasize our focus on Small and Medium sized business (SMB). It spans not just servers and storage, but across other offerings from other IBM divisions.
Of course, just renaming products and services isn't enough. Systems don't work together just because they have similar names, are covered in similar "Apple white" plastic, or have similar black bezels. Obviously, thoughtful and collaborative design are needed, with the appropriate amounts of engineering and testing. IBM is aligning its server and storage development so that the IBM Systems brand keeps its promise.
Eventually hardware fails, ... ... eventually software works.
For a solid backup product, consider usingIBM Tivoli Storage Manager.I use it to protect all my data on my laptop. And when switching recently from my old Thinkpad T30 to my newThinkpad T60, used it to transfer my data over as well.[Read More]
BladeCenterservers come in many flavors, including blades with Intel, AMD and POWER chipsets, and can be configured in Grid and SuperComputer configurations. Up to 14 blade servers can fit intoa single 7U-high chassis, making this twice as dense as standard 1U-high rack-mounted servers.
System x, the new "IBM Systems" name for our popular xSeries product line, support Intel and AMD chipsets. These come in both rack-mountedand tower configurations. These also are idea for clustered and SuperComputer configurations.[Read More]
An astute reader brought this to my attention. The newest addition to our "IBM Express Portfolio"set of SMB-oriented offerings is the new TS3100 tape library. This has one LTO Gen 3 drive and up to 22 cartridges, which can be a mix of WORM and rewriteable cartridges,beautifully packaged in a small 2U high (3.5 inch) rack-mountable chassis. Each cartridge can hold up to 800GB uncompressed, or 1.6TB with typical 2-to-1 compression.
This tape library would be a great complement to TSM Express for backup, and to theDR550 Express for archive and compliance storage.
And now, for a limited time, there is a $1500 rebate, check website for details.
It has always been the case in fast pace technology areas that you can't tell the players without a program card, andthis is especially true for storage.
When analyzing each acquistion move, you need to think of what is driving it. What are the motives?Having been in the storage business 20 years now, and seen my share of acquisitions, both from within IBM,as well as competition, I have come up with the following list of motives.
Although slavery was abolished in the US back in the 1800's, and centuries earlier everywhere else, many acquisitionsseem to be focused on acquiring the people themselves, rather than the products or client list. I have seen statistics such as "We retained 98% of the people!" In reality, these retentions usually involve costly incentives,sign-in bonuses, stock options, and the like. Desptie this, people leave after a few years, often because ofpersonality or "corporate culture" clash. For example, many former STK employees seem to be leaving after their company was acquired by Sun Microsystems.
If you can't beat them, join them. Acquisitions can often be used by one company to raise its ranking in marketshare, eliminating smaller competitors. And now that you have acquired their client list, perhaps you can sellthem more of your original set of products!
Symantec had acquired Veritas, which in turn had acquired a variety of other smaller players, and the end result is that they are now #1 backup software provider, even though none of theirproducts holds a candle to IBM's Tivoli Storage Manager. Meanwhile, EMC acquired Avamar to try to get more into the backup/recovery game, but most analysts still find EMC down in the #4 or #5 place in this category.
Next month,Brocade's acquisition of McData should take effect, furthering its marketshare in SAN switch equipment.
Prior to my current role as "brand market strategist" for System Storage, I was a "portfolio manager" where wetried to make sure that our storage product line investments were balanced. This was a tough job, as the investmentshad to balance the right development investments into different technologies, including patent portfolios.Despite IBM's huge research budget, I am not surprised that some clever inventions of new technologies comefrom smaller companies, that then get acquired once their results appear viable.
The last motive is value shift. This is where companies try to re-invent themselves, or find that they are stuck in acommodity market rut, and wish to expand into more profitable areas.
LSI Logic acquisition of StoreAge is a good exampleof this. Most of the major storage vendors have already shifted to software and services to provide customer value,as predicted in 1990's by Clayton Christensen in his book "The Innovator's Dilemma". The rest are still strugglingto develop the right strategy, but leaning in this general direction.
Continuing this week's theme of New Year's Resolutions for the data center, today we'll talk about one that many people make for their own personal lives: staying on a budget.
Often, when faced with a tightening budgets, we try to make more use of what we already have. Tell someone they are only using 10 percent of their brain, and they immediatelybelieve you; but tell them they are only using 30 percent of their storage, and they ask for a whitepaper,magazine article, or clarification on how that percentage is calculated. I actually visiteda customer that was only using6 percent of the storage attached to their Windows servers!
So, to help those of you making data center resolutions to stay on budget, the terms to remember are "Reduce", "Reuse" and "Recycle".
When people come to request storage, are they being reasonable about what they need today, or are they asking for what they might need over the next three years? They might need 50GB, but they ask for 100GB, in case they grow, and a year later, you find they have only 15GB of data on it. On the flipside, the person asks for what they need but some storage admins give out more, just so they don't have to be bothered so often when growth happens. Finally, I have seen this formalized into fixed size LUNs, all the disk is carved into big huge 100GB pieces, so if you need 20GB, here's one big enough with plenty of room to grow.
If you are going to keep on a budget, remember that storage today is 30% more expensive than storage next year. That is the average drop in both disk and tape on a dollar-per-MB basis. If there is any way to postpone giving out storage until it is actually needed, you can save a bundle of money. Timing is everything! In the event of a disaster, getting immediate replacement for disk can be very expensive, but if you can wait just two weeks, you can negotiate a better deal. I thought of this while going to the movie theatre yesterday. A "hot dog" and a bottle of water was $8.00, but if you are able to wait two hours and eat after the movie, you can get a much better meal for less.
A lot of companies buy new storage because their existing storage isn't fast enough, or doesn't have the latest copy services. This can easily be solved with an IBM SAN Volume Controller (SVC). The SVC can virtualize slower, functionless storage, and present to your application hosts virtual disks that are faster, and with all the latest disk-to-disk copy services like FlashCopy, Metro Mirror, and Global Mirror.
Chances are, you have unused disk capacity spread across all your storage today, but perhaps they are formatted into small LUNs. The SVC can combine the capacity, and let you carve up big LUNs at the sizes you need.This is like taking all those tiny pieces of soap in your shower and forming a new bar of soap, or taking all the crumbs at the bottom of your bread box, and making a new slice of bread. And, the virtual LUNs are dynamically expandable,so give out only the amount they need today, as it is simple to expand them to larger sizes later.
Of my 13 patents, the first will always be my favorite, on a function called "RECYCLE" for the Data Facility Storage Management Subsystem Hierarchical Storage Manager (DFSMShsm) product, which is now a component of the IBM z/OS operating system. Basically, tapes could contain hundreds or thousands of files, such as backup versions or archive copies, and these expired on different dates. As a result, a tape would be written100 percent full, and then over time, decrease in valid data to 80, 60, 40, 20 until it hit 0 percent. In some cases, a single filecould hold an entire tape hostage. RECYCLE was able to read the valid data off tapes that were perhaps less than 20 percent full, and consolidate them onto fewer tapes. As a result, a whole bunch of tapes could be returned to the scratch pool, and reused immediately for other workloads. This also helps in moving to newer, higher capacity cartridges, such as the new 700GB cartridge that IBM co-developed with FujiFilm.(This RECYCLE function exists in our IBM Tivoli Storage Manager software, as well as our Virtual Tape Server, but is called "reclamation" instead, to avoid confusion on searches.)
When evaluating your use of tape, determine if you are making best use of the tapes you have now, and perhaps a RECYCLE (or reclamation) scheme may be in order. Fewer tapes can save money in many ways, such as reduced storage costs, and reduced courier costs to send the tapes offsite. Tape media can still be 10-20 times less expensive than disk, based on full capacity.
This week I am in Japan, so my week's theme will center around travel, speaking at conferences, and Japan itself. I first travelled to Japan in the late 1980s, to visit a college friend who was working for Ford Motor Company, on assignment in Japan as liasion to Mazda Corp.
Back then, the only Japanese phrase I knew was "Wakarimashta" which means "I know" or "I understand". If you only know one phrase in a foreign language, this possibly could be the worst to know.
My second trip, I was better prepared. I learned three "survival phrases":
sumimasen - "I'm sorry/excuse me" hanashimasen - "I don't speak" wakarimasen - "I don't know / I don't understand"
These are great phrases to know individually, but even more powerful strung all together, to emphasize that you will begin speaking English, but at least with good reason (and perhaps a bit of irony.)
I've been to Japan many times since, and have picked up more of the language. When travelling to Japan, or anywhere for that matter, it is important to "pack light". I'll be gone for two weeks, but all I bring is a laptop bag and one carry-on piece of luggage.
I went on a trip to Prague (Czech Republic) with a female co-worker who brought FOUR pieces of luggage. One was just for shoes. Another piece was just for hair styling gel, make-up, face creams and finger nail polish. Today, the rules are different, and the TSA allows only a single quart-size plastic bag containing little jars of 3 ounces or less of liquids or gels. I didn't have any "quart-size" bags, so I used a smaller sandwich-size bag.
What does all this have to do with storage? I've helped many clients move data centers, and this involves moving their servers, their networks, and their storage. Servers and Networks are easy to move, but storage presents some challenges. In many cases, the entire company is shut down, the storage is moved, and then the company is operational again. Needless to say, it is best to do this over a weekend.
I tell clients to "pack light" and figure out what data they really need in the move. What do you really need to operate your business? Bring just that, the rest can arrive later.
This same concept applies for Business Continuity and Disaster Recovery planning. What do you really need after a disaster occurs? Can you run your business for a few weeks on that data, until the rest of the data is restored? If you can't run your entire business on that data, can you run your most important parts of your business?
If you run a bank, perhaps keeping your ATM cash machines running is more important than making out new loans. In Japan, if a bank has any outages that impact their ATM machines, they put out a full page advertisement in the local papers to apologize for the inconvenience.
Business Continuity is one of the nine "Infrastructure Solutions" that IBM can help clients with. If you are interested in learning more on how IBM can help you with your Business Continuity, click here.
Continuing my week's theme on travel, conferences, and Japan, I saw two items in the newsthat seem to follow a common theme.
According to the "The Daily Yomiuri", a local Japanese paper, "double happy weddings" arebecoming more and more popular in Japan. These would be called "stotgun" weddings in the US, butin Japan, couples pay extra to have a wedding between the fifth and seventh month ofpregnancy. As Dave Barry would say, I am not making this up. 27% of couples in Japan got married while or after pregnant. The logic is that they can celebrate both events with one ceremony. Many couples believe that the primary purpose of marriage is to have children, and somethat fail to have children suffer terrible anguish or divorce. Waiting untilbeing pregnant helps ensure the couple will be "successful" in this regard.
IBM acquires Softek, a software company that develops a product called Transparent Data MoverFacility (TDMF) to move mainframe data from one disk system to another, while applicationsare running. This can be used, for example, to move data from outdated disk systems to IBMdisk systems. This is not to be confused with IBM's archive and retention software partner,Princeton Softech.
Softek is the software spin-off of Fujitsu (a Japanese computer hardware manufacturer). Fora while, Fujitsu made IBM-compatible mainframe servers, but was not successful at developingits own system software, relying heavily on IBM for this. Unable to compete against IBM, it stoppedmaking mainframe servers, but continues making other kinds of hardware equipment.
With TDMF, the process of moving data is simple. The software runs on z/OS and intercepts all writes intendedfor a source volumes on the old array, and re-directs a copy to destination volumes on the new device.Systems can run with old and new equipment side by side for a few weeks, with the new devicestaying in-sync with the old. When the client is ready to cross over, the systems arepointed to the new disk, and the old disk systems are detached and removed from the sysplex.
Afraid that installing TDMF will mess with your applications? IBM Global Technology Services (GTS)is able to roll-in a separate mainframe, move the data, than disconnect it along with the old storage.
(For customers running Linux, UNIX or Windows on other platforms, IBM offers SAN Volume Controller (SVC).While SVC is not marketed as a "data migration device", per se, it does have this capability.Many clients were able to cost-justify purchase of an SVCto move data from old storage to new in similar fashion to how TDMF works on the mainframe.)
What do these stories have to do with one another, other than both relating to Japan? IBM has beenusing TDMF for years as part of a service offering to move data from one disk system to another.Since Sam Palmiasano took over in 2002, IBM has acquired 51 companies, 31 of them software companies.Often, these have been "successful" turning quickly profitable because IBM was already well familiar with the companies they acquire, in much the same way that husbandsare well familiar with their brides-to-be at a "double happy wedding".
So, welcome Softek! It looks like its time to celebrate again!
Federal Rules for Civil Procedures (FRCP) will increase adoption of unstructured data classification, email archive systems and CAS.
CAS continues to flounder, but the rest I can agree with. Regulations are being adopted world wide. Japan has its own Sarbanes-Oxley (SOX) style legislation go into effect in 2008.IBM TotalStorage Productivity Center for Data is a great tool to help classify unstructured file systems. IBM CommonStore for email supports both Microsoft Exchange and Lotus Domino, and can be connected to IBM System Storage DR550 for compliance storage.
Unified storage systems (combined file and block storage target systems) will become increasingly attractive in 2007, because of their ease of use and simplicity.
I agree with this one also. Our sales of IBM N series in 2006 was great, and looking to continue its strong growth in 2007. The IBM N series brings together FCP, iSCSI and NAS protocols into one disk system. With the SnapLock(tm) feature, N series can store both re-writable data, as well as non-erasable, non-rewriteable data, on the same box. Combine the N series gateway on the front-end with SAN Volume Controller on the back-end, and you have an even more powerful combination.
Distributed ROBO backup to disk will emerge as the fastest growing data protection solution in 2007.
IDC had a similar prediction for 2006. ROBO refers to "Remote Office/Branch Office", and so ROBO backup deals with how to back up data that is out in the various remote locations. Do you back it up locally? or send it to a central location?Fortunately, IBM Tivoli Storage Manager (TSM) supports both ways, and IBM has introduced small disk and tape drives and auto-loaders that can be used in smaller environments like this. I don't know whether "backup to disk" will be the fastest growing, but I certainly agree that a variety of ROBO-related issues will be of interest this year.
2007 will be remembered as the year iSCSI SAN took off because of the much reduced pricing for 10 Gbit iSCSI and the continued deployment of 10 Gbit iSCSI targets.
While I agree that iSCSI is important, I can't say 2007 will be remembered for anything.We have terrible memory in these things. Ask someone what year did Personal Computers (PC) take off, and they will tell you about Apple's famous 1984 commercial. Ask someone when the Internet took off, cell phones took off, etc, and I suspect most will provide widely different answers, but most likely based on their own experience.
For the longest time, I resisted getting a cell phone. I had a roll of quarters in my car, and when I needed to make a call, I stopped at the nearby pay-phone, and made the call. In 1998, pay phones disappeared. You can't find them anymore. That was the year of the cell phones took off, at least for me.
Back to iSCSI, now that you can intermix iSCSI and SAN on the same infrastructure, either through intelligent multi-protocol switches available from your local IBM rep, or through an N series gateway, you can bring iSCSI technology in slowly and gradually. Low-cost copper wiring for 10 Gbps Ethernet makes all this very practical.
Another up-and-coming technology is AoE, or ATA-over-Ethernet. Same idea as iSCSI, but taken down to the ATA level.
CDP will emerge as an important feature on comprehensive data protection products instead of a separate managed product.
Here, CDP stands for Continuous Data Protection. While normal backups work like a point-and-shoot camera, taking a picture of the data once every midnight for example. CDP can record all the little changes like a video camera, with the option to rewind or fast-forward to a specific point in the day. IBM Tivoli CDP for Files, for example, is an excellent complement to IBM Tivoli Storage Manager.
The technology is not really new, as it has been implemented as "logs" or "journals" on databases like DB2 and Oracle, as well as business applications like SAP R/3.
The prediction here, however, relates to packaging. Will vendors "package" CDP into existing backup products, possibly as a separately priced feature, or will they leave it as a separate product that perhaps, like in IBM's case, already is well integrated.
The VTL market growth will continue at a much reduced rate as backup products provide equivalent features directly to disk. Deduplication will extend the VTL market temporarily in 2007.
VTL here refers to Virtual Tape Library, such as IBM TS7700 or TS7510 Virtualization Engine. IBM introduced the first one in 1997, the IBM 3494 Virtual Tape Server, and we have remained number one in marketshare for virtual tape ever since. I find it amusing that people are now just looking at VTL technology to help with their Disk-to-Disk-to-Tape (D2D2T) efforts, when IBM Tivoli Storage Manager has already had the capability to backup to disk, then move to tape, since 1993.
As for deduplication, if you need the end-target box to deduplicate your backups, then perhaps you should investigatewhy you are doing this in the first place? People take full-volume backups, and keep to many copies of it, when a more sophisticated backup software like Tivoli Storage Manager can implement backup policies to avoid this with a progressive backup scheme. Or maybe you need to investigate why you store multiple copies of the same data on disk, perhaps NAS or a clustered file system like IBM General Parallel File System (GPFS) could provide you a single copy accessible to many servers instead.
The reason you don't see deduplication on the mainframe, is that DFSMS for z/OS already allows multiple servers to share a single instance of data, and has been doing so since the early 1980s. I often joke with clients at the Tucson Executive Briefing Center that you can run a business with a million data sets on the mainframe, but that there wereprobably a million files on just the laptops in the room, but few would attempt to run their business that way.
Optical storage that looks, feels and acts like NAS and puts archive data online, will make dramatic inroads in 2007.
Marc says he's going out on a limb here, and that's good to make at least one risky prediction. IBM used to have anoptical library emulate disk, called the IBM 3995. Lack of interest and advancement in technology encouraged IBM to withdraw it. A small backlash ensued, so IBM now offers the IBM 3996 for the System p and System i clients that really, really want optical.
As for optical making data available "online", it takes about 20 seconds to load an optical cartridge, so I would consider this more "nearline" than online. Tape is still in the 40-60 second range to load and position to data, so optical is still at an advantage.
Optical eliminates the "hassles of tape"? Tape data is good for 20 years, and optical for 100 years, but nobody keeps drives around that long anyways. In general, our clients change drives every 6-8 years, and migrate the data from old to new. This is only a hassle if you didn't plan for this inevitable movement. IBM Tivoli Storage Manager, IBM System Storage Archive Manager, and the IBM System Storage DR550 all make this migration very simple and easy, and can do it with either optical or tape.
The Blue-ray vs. DVD debate will continue through 2007 in the consumer world. I don't see this being a major player in more conservative data centers where a big investment in the wrong choice could be costly, even if the price-per-TB is temporarily in-line with current tape technologies. IBM and others are investing a lot of Research and Development funding to continue the downward price curve for tape, and I'm not sure that optical can keep up that pace.
Well, that's my take. It is a sunny day here in China, and have more meetings to attend.
I didn't really have a theme this week, still recovering from jet-lag from my travels through Japan, Australia, China.
Gary Diskman has an amusing blog entry about a Funny disaster recovery job posting. It is not clear if he is being completely tongue-in-cheek, or a bit cynical. However, it rings true that you get what you measure, and some managers look for easy metrics, even if there are unintended consequences.
Western medicine works this way. Rather than paying your doctor to keep you healthy, you pay him per visit, to get refills on prescriptions, check-ups on medical conditions, surgeries and so on. While Eastern medicine is focused on keeping people healthy, Western medicine profits more from resolving "situations".
I have seen similar situations on the "health" of the data center. In one case, the admins were measured on how quickly they bring back up their web-servers after a crash. They had this process down to a science, because they were measured on how quickly they resolved the situation. I suggested switching from Windows to Linux, a much more reliable operating system for web-serving, and showed examples of web-servers running Linux that have been up for 1000 days or more. Management changed the metrics to "average up-time in days" and magically the re-boots all but disappeared, thanks to Linux, but also thanks in part to shifting the incentive structure. Perhaps some of those earlier situations were "artificially created"?
Back in the 1980s, I was working on a small software project that was about 5000 lines of code. In those days, testers were measured by the number of "successful" testcases that ran without incident. Testcases that uncovered an error were labeled as "failures" to be re-run after the developers fixed the code. When I declared my code ready for test, the test team ran 110 testcases, all successfully, and they were all rewarded for meeting their schedule. I, on the other hand, did not accept these results, met with them and told them I would give them $100 each if they could find a bug in my code in the next week. Nobody writes 5000 lines of code without some error along the way, not even me. (As one author put it, more people have left earth's gravity to orbit the planet than have written perfect code that did not require subsequent review or testing. It's so true. Good software is difficult to write.)
The test team accepted the challenge, and found 6 problems, more than I expected, but at least I felt more confident of the code quality after fixing these. As I suspected, the unintended consequence of counting "successful" testcases was that testers would write the most simple, basic, least-likely-to-challenge-boundaries testcases to ensure they meet their numbers. My experiment was costly to me, but more importantly was a wake-up call for the test management, and they realized they needed to re-evaluate their test procedures, metrics and terminology. This was a long time ago, and I am glad to see that the overall "software engineering" practice has matured much over the past 20 years.
So, my advice is to determine metrics that have the intended consequences you want, while avoiding any negative unintented consequences that might undermine your eventual success. People will quickly figure out how to maximize the results, and if you can align their goals to company goals, then everybody benefits.
Well, I'll be blogging from Mexico next week (yes, it is a business trip!). Enjoy the weekend.
Tonight I had dinner with Henry Daboub (an SVC expert from Houston, TX) and some clients, who asked what I would blog about tonight, and I figured it made sense to blog about the SVC.
Hu Yoshida clarifies his position about storage virtualization, including the statement: "As a result they can not provide the availability, scalability, and performance of a DS8300. If they could, there would be no need for a DS8300."
Of course, if humans descended from apes, why are there still apes? Now that we have cars, why are there still trains? But perhaps a better question is: now that there are supercomputers, why are there still mainframe servers?
The issue is the difference between scale-up versus scale-out. Scale-up is making a single box as big and beefy as possible. When the SVC was introduced, the major vendors all had scale-up designs: IBM ESS 800, HDS Lightning, EMC Symmetrix. Like the mainframe, they were for customers that wanted everything in a single monolithic container.
SAN Volume Controller was the result of IBM Research asking the question, if you could put anyone's software (feature and functionality) on anyone's hardware (monolithic scale-up design), what combination would you choose? What if the brains inside today's monolithic systems could be snapped into the another vendor's frame? What if you could run SRDF on an HDS box, or ShadowImage on an IBM box? The surprising response was that most customers would want a single software for consistency, but wanted the option to choose from different vendors hardware, to negotiate the best price of the commodity iron. Based on this feedback, the SVC was born.
The idea was simple, put all the brains in a separate appliance. The appliance would do the non-disruptive migrations, the caching, the striping, and all the copy services. This lets the customer chose then the hardware they want, any mix of FC and ATA disk, from any vendor.
The SVC design was based on IBM's long history in supercomputers. Using the same "scale-out" technology, the power comes not from having it all in one monolithic box, but rather in a design that combines small nodes together. While the cache is not globally shared, the data is shared between node-pairs, and the logical-to-physical mapping is routed around to all nodes in a cluster. Each SVC node talks to each other SVC node through the FCP ports, eliminating the need for additional wiring. For the most part, each node does its own separate work, but when it needs to, they can communicate across, just like nodes in a supercomputer.
Both the SVC and the DS8300 Turbo have better than 99.999 percent availability, based on redundant components designed for no single point of failure (SPOF). IBM has sold thousands of each, and they have been in the field enough time that we can make that claim. There is nothing between scale-up versus scale-out that makes on inherently more available than the other.
Both the SVC and the DS8300 Turbo can scale from as little as a few TB of disk, to hundreds of TB of disk. We have yet to meet a customer that is too big for the SVC. The DS8300 Turbo is able to scale by adding up to four extension frames, but is still considered a single box from a scale-up perspective. From a processor perspective, an 8-node SVC cluster has 16 Intel Xeon processors, and the DS8300 has 8 POWER5+ processors (dual 4-way). The key advantage of scale-out is that you can add capacity to the SVC in smaller increments. Jumping from a DS8100 (dual 2-way) to a DS8300 (dual 4-way) is a big jump.
SVC remains the fastest disk system in the industry, based on both the SPC-1 and SPC-2 benchmarks. The latest model now supports 8GB per node, for a total of 64GB for an 8-node cluster. This can be used for both read and write non-volatile storage. By comparison, DS8300 Turbo has 32GB write non-volatile storage, and up to 256 GB of read-only cache. The SVC is able to do 155,519 IOPS, faster than the 123,030 IOPS for the DS8300, and of course faster than anything from EMC, HDS, HP or Texas Memory Systems. Of course, workloads vary, and there might be some workloads where the 256GB of read-only cache of the monolithic DS8300 is the better choice.
Both SVC and DS8300 Turbo offer FlashCopy (point-in-time copy), Metro Mirror (synchronous) and Global Mirror (asynchronous). SVC provides the additional benefit that it can perform a FlashCopy from one frame to another, and the ability to migrate data seemlessly from one box to another.
Interestingly, IBM has seen a resurgence in both mainframe sales, as well as interest in supercomputers. Both have their place, based on the workload characteristics, and so IBM will continue to offer both modular scale-out designs, as well as monolithic scale-up designs, to meet the different needs of the marketplace.
Well, this week I am in Maryland, just outside of Washington DC. It's a bit cold here.
Robin Harris over at StorageMojo put out this Open Letter to Seagate, Hitachi GST, EMC, HP, NetApp, IBM and Sun about the results of two academic papers, one from Google, and another from Carnegie Mellon University (CMU). The papers imply that the disk drive module (DDM) manufacturers have perhaps misrepresented their reliability estimates, and asks major vendors to respond. So far, NetAppand EMC have responded.
I will not bother to re-iterate or repeat what others have said already, but make just a few points. Robin, you are free to consider this "my" official response if you like to post it on your blog, or point to mine, whatever is easier for you. Given that IBM no longer manufacturers the DDMs we use inside our disk systems, there may not be any reason for a more formal response.
Coke and Pepsi buy sugar, Nutrasweet and Splenda from the same sources
Somehow, this doesn't surprise anyone. Coke and Pepsi don't own their own sugar cane fields, and even their bottlers are separate companies. Their job is to assemble the components using super-secret recipes to make something that tastes good.
IBM, EMC and NetApp don't make DDMs that are mentioned in either academic study. Different IBM storage systems uses one or more of the following DDM suppliers:
Seagate (including Maxstor they acquired)
Hitachi Global Storage Technologies, HGST (former IBM division sold off to Hitachi)
In the past, corporations like IBM was very "vertically-integrated", making every component of every system delivered.IBM was the first to bring disk systems to market, and led the major enhancements that exist in nearly all disk drives manufactured today. Today, however, our value-add is to take standard components, and use our super-secret recipe to make something that provides unique value to the marketplace. Not surprisingly, EMC, HP, Sun and NetApp also don't make their own DDMs. Hitachi is perhaps the last major disk systems vendor that also has a DDM manufacturing division.
So, my point is that disk systems are the next layer up. Everyone knows that individual components fail. Unlike CPUs or Memory, disks actually have moving parts, so you would expect them to fail more often compared to just "chips".
If you don't feel the MTBF or AFR estimates posted by these suppliers are valid, go after them, not the disk systems vendors that use their supplies. While IBM does qualify DDM suppliers for each purpose, we are basically purchasing them from the same major vendors as all of our competitors. I suspect you won't get much more than the responses you posted from Seagate and HGST.
American car owners replace their cars every 59 months
According to a frequently cited auto market research firm, the average time before the original owner transfers their vehicle -- purchased or leased -- is currently 59 months.Both studies mention that customers have a different "definition" of failure than manufacturers, and often replace the drives before they are completely kaput. The same is true for cars. Americans give various reasons why they trade in their less-than-five-year cars for newer models. Disk technologies advance at a faster pace, so it makes sense to change drives for other business reasons, for speed and capacity improvements, lower power consumption, and so on.
The CMU study indicated that 43 percent of drives were replaced before they were completely dead.So, if General Motors estimated their cars lasted 9 years, and Toyota estimated 11 years, people still replace them sooner, for other reasons.
At IBM, we remind people that "data outlives the media". True for disk, and true for tape. Neither is "permanent storage", but rather a temporary resting point until the data is transferred to the next media. For this reason, IBM is focused on solutions and disk systems that plan for this inevitable migration process. IBM System Storage SAN Volume Controller is able to move active data from one disk system to another; IBM Tivoli Storage Manager is able to move backup copies from one tape to another; and IBM System Storage DR550 is able to move archive copies from disk and tape to newer disk and tape.
If you had only one car, then having that one and only vehicle die could be quite disrupting. However, companies that have fleet cars, like Hertz Car Rentals, don't wait for their cars to completely stop running either, they replace them well before that happens. For a large company with a large fleet of cars, regularly scheduled replacement is just part of doing business.
This brings us to the subject of RAID. No question that RAID 5 provides better reliability than having just a bunch of disks (JBOD). Certainly, three copies of data across separate disks, a variation of RAID 1, will provide even more protection, but for a price.
Robin mentions the "Auto-correlation" effect. Disk failures bunch up, so one recent failure might mean another DDM, somewhere in the environment, will probably fail soon also. For it to make a difference, it would (a) have to be a DDM in the same RAID 5 rank, and (b) have to occur during the time the first drive is being rebuilt to a spare volume.
The human body replaces skin cells every day
So there are individual DDMs, manufactured by the suppliers above; disk systems, manufactured by IBM and others, and then your entire IT infrastructure. Beyond the disk system, you probably have redundant fabrics, clustered servers and multiple data paths, because eventually hardware fails.
People might realize that the human body replaces skin cells every day. Other cells are replaced frequently, within seven days, and others less frequently, taking a year or so to be replaced. I'm over 40 years old, but most of my cells are less than 9 years old. This is possible because information, data in the form of DNA, is moved from old cells to new cells, keeping the infrastructure (my body) alive.
Our clients should approach this in a more holistic view. You will replace disks in less than 3-5 years. While tape cartridges can retain their data for 20 years, most people change their tape drives every 7-9 years, and so tape data needs to be moved from old to new cartridges. Focus on your information, not individual DDMs.
What does this mean for DDM failures. When it happens, the disk system re-routes requests to a spare disk, rebuilding the data from RAID 5 parity, giving storage admins time to replace the failed unit. During the few hours this process takes place, you are either taking a backup, or crossing your fingers.Note: for RAID5 the time to rebuild is proportional to the number of disks in the rank, so smaller ranks can be rebuilt faster than larger ranks. To make matters worse, the slower RPM speeds and higher capacities of ATA disks means that the rebuild process could take longer than smaller capacity, higher speed FC/SCSI disk.
According to the Google study, a large portion of the DDM replacements had no SMART errors to warn that it was going to happen. To protect your infrastructure, you need to make sure you have current backups of all your data. IBM TotalStorage Productivity Center can help identify all the data that is "at risk", those files that have no backup, no copy, and no current backup since the file was most recently changed. A well-run shop keeps their "at risk" files below 3 percent.
So, where does that leave us?
ATA drives are probably as reliable as FC/SCSI disk. Customers should chose which to use based on performance and workload characteristics. FC/SCSI drives are more expensive because they are designed to run at faster speeds, required by some enterprises for some workloads. IBM offers both, and has tools to help estimate which products are the best match to your requirements.
RAID 5 is just one of the many choices of trade-offs between cost and protection of data. For some data, JBOD might be enough. For other data that is more mission critical, you might choose keeping two or three copies. Data protection is more than just using RAID, you need to also consider point-in-time copies, synchronous or asynchronous disk mirroring, continuous data protection (CDP), and backup to tape media. IBM can help show you how.
Disk systems, and IT environments in general, are higher-level concepts to transcend the failures of individual components. DDM components will fail. Cache memory will fail. CPUs will fail. Choose a disk systems vendor that combines technologies in unique and innovative ways that take these possibilities into account, designed for no single point of failure, and no single point of repair.
So, Robin, from IBM's perspective, our hands are clean. Thank you for bringing this to our attention and for giving me the opportunity to highlight IBM's superiority at the systems level.
The blogosphere has quieted down a bit over the two papers on MTBF estimates for Disk Drive Modules (DDM).One article on SearchStorage.com by Arun Taneja asksIs RAID passé? Disk capacity is growing at a faster rate than DDM reliability. During the hours to rebuild a DDM, companies are at risk of additional failures that could require recovery from a copy, or result in data loss, depending on how well your Business Continuity (BC) plan is written and followed.
... The problem with that is that it's the DISK ARRAY that determines when a drive has failed an starts the rebuild process. That IS under the control of IBM, specifically the controller. But more importantly, it effects my risk of data loss.
As I see it, my risk of data loss with RAID-5 is influenced by two main factors. 1 - The drive replacement rate and 2 - The rebuild time (which to a great extent is a function of the drive size) both of which IBM has some control over.
So, I think that the question in my mind is, what's the tipping point? Where does the risk of using RAID-5 protection exceed what I'm willing to accept, and I need to move to some other protection mechanism like RAID-6? Is it when the rebuild times exceed 12 hours? 24 hours? 48 hours?
Also, I wonder why IBM isn't publishing some information to help me make these kinds of decisions?
Oh, dear - while Tony doesn’t seem to be parrying vigorously (as Seagate, Hitachi, and Chunk were doing), his contribution sounds more like IBM marketing than the kind of detailed, technical response one might have hoped for
... well, he *is* a manager, and a marketing one at that, so perhaps we shouldn’t expect more).
Both are fair comments. Disk arrays do run microcode to assist or perform the RAID function, detect failures and start the rebuild process, and so clever designs to support spare disks, process the rebuild quickly, and so on, can differentiate one vendor's offering from another.
On the issue of what does IBM provide to help its clients make the right decisions for their environments, Jon William Toigo at DrunkenData points his readers to IBM's Business Continuity Self-Assessment tool. In normal data center conditions, DDMs will fail, and a Business Continuity plan shouldbe written and developed to handle this fact. Using 2-site and 3-site mirroring, complemented with versions of tape backups, can help address some of these concerns and mitigate some of the risks involved with using disk systems.
For those who want a more technical answer, IBM has just published a series of IBM Redbooks.
Each client's situation is different, so no simple answer is possible. However, IBM does have a lot of experience in this area, and would be glad to help you write or update your existing Business Continuity plan.
I survived my first day at SNW Spring 2007.This is my first time at SNW, but it is very much like many of the other conferences I have been to.It officially started Monday morning with pre-conferencetutorials and primer break-outsessions that covered storage fundamentals, but I didn't arrive until late Monday night due to highwind conditions at the Phoenix airport that delayed my travel.
Tuesday started out with main tent sessions. Ron Milton, VP of ComputerWorld that puts on this conference,and Vincent Franceschini, Chairman of the Board for SNIA, kicked off the event.It didn't take them long to get into the alphabet soup: ILM, ITIL, SMI-S, XAM, IMA, MMA, DDF,MF, DMF, IPSF, SSIF, and SRM.Several hundred people had "voting devices" so that they could participate in "informal" surveys.
Q1. What was the greatest need?
37% Storage Resource Management (SRM) tools
19% Storage Virtualization
19% Information Lifecycle Management (ILM)
14% Integration with other management tools
11% Compliance storage for regulations
Q2. What are people doing to address storage infrastructure complexity?
33% Deploying new SRM and SAN management tools
26% Adopting "Storage as a Service" methodology
22% Deploying new storage virtualization technologies
8% Hiring more staff
9% (complexity was not an issue)
The first keynote speaker was Cora Carmody, CIO of SAIC. In the late 1980s and early 1990s, I did a lot of work with SAIC here in San Diego, and so IBM sent me to San Diego quite frequentlyfor face-to-face meetings with them. Her talk was cryptically titled "Jumbo Shrimp, InformationManagement, and the Mark of the Beast." Coming up with good titles is important. Some of herkey points:
"Information management" was as much an oxymoron as "jumbo shrimp" or "military intelligence".(SAIC is a general contractor for the US Military, so this was especially funny).
Computer data needs both "ownership" and "stewardship".
Gartner analyst reports that 50% of digital information for a business resides in personal files onindividual PCs.
PAN-StaRRs project is ingesting 10TB per week of astronomical data.
TeraTEXT(R) project is a non-relational database that supports a large mix of structured and unstructured content.
The next "Y2K" crisis for the USA is changing from 3-digit to 4-digit area codes for our telephone numbers.
Battery size and life have not advanced as fast as we need
There has been little progress in "User Interface" ease of use
Formats and standards are picked for the most part by the winning vendors, and it is the silence of themarketplace that lets them get away with this.
We are overly reliant on an inherently insecure medium.
The "mark of the beast" refers to exciting new technologies based on "presence awareness". For example,some hotels now are able to check you into the hotel as you drive up in your car, based on your car's licenseplate. Some 24-hour gyms use your fingerprint as your entry credentials, eliminating the need to staff peopleat the front desk.
IBM's own Barry Rudolph, presented "Storage in an Age of Inconvenient Truths", dressed up like Oscar-winner andformer USA Vice President Al Gore. Barry's focus was on the growingconcern of over environmental Power and Cooling issues in the data center. According to IDC, the cost of power and cooling an individual server, over its lifetime, now exceeds its acquisition cost. Storage devices are not as bad as servers in this regard. Data centers now consume 1.2% of the worlds energy.
Over lunch, I heard Tony Asaro from ESG present "The Need for Highly Virtualized Storage Systems withina Virtualized Data Center." His concern is that there is still a "heavy touch" required to manage storage.Without virtualization, your data center is less than the sum of its parts. Although IBM has been doingstorage virtualization since 1974, Tony mentioned that most storage vendors were "late to the party".He argues that "internal virtualization" inside storage arrays is not enough, you need "external virtualization"(like the IBM System Storage SAN Volume Controller) to virtualize your entire infrastructure.What storage administrators would like is for storage to have consumer levels of "ease of use", and today'snon-virtualized storage environments are nowhere near that.
"The great advantage [the telephone] possesses over every other form of electrical apparatus consists in the fact that it requires no skill to operate the instrument." - Alexander Graham Bell, 1878
I attended a few break-out sessions in the afternoon.
Ralph presented "Crisis of Capacity" which covered the drastic actions he had to take to handle power and coolingin their expanding data center during their summer months, where temperatures peak up to 105 degrees. This included creating "hot" and "cold" aisles onhis raised floor by re-organizing the perforated floor tiles, and doing a better job standardizing how cables areconnected to the back of racks and up through the ceiling to maximize airflow. An amp-meter on each power strip was used to measure the powerused at each rack, which allowed them to better prioritize their efforts. Their Air Conditioning unit was only 12inches from the concrete floor, and raising it to 18 inches greatly reduced noise and vibration. Adding a second AC unit made a world of difference. Finally, they eliminatedKVMs, because people who use KVMs break other parts of thedata center. His rule of thumb: the cooling requirements will be 50% of the rated power requirements for equipment.
Terry Yoshi, Intel internal IT department, as a member of the SNIA's end user council
Terry presented "Taming the SAN Complexity". The problem with "complexity" as a concept is that it is very subjective, difficult to quantify, and therefore difficult to manage. He presented complexity in four areas:Organizational structure of the company as a whole; skill sets required of the IT staff; business process andprocedures; and technology. Dealing with complexity is a battle between Old School (because we've always doneit this way) and New School (because it is new and different technology). Storage Area Networks are inherentlya "shared resource", and the increased complexity is a direct result of the low reliability of the componentsand devices it is composed of. People should focus on the "Total Cost of Ownership" (TCO) for a SAN, and not just the initial acquisitionprice of SAN gear.He was not a fan of the "dual/multiple" vendor strategy that many companies employto reduce costs. His suggestion that things should be tried out first on your "test SAN" caused some chuckles,as few have such a thing. Finally, he suggested not only documenting "Best Practices" and "Best Known Methods"but also things that have been found not to work, his do-not-try-this-at-home list.
Tony Antony, Cisco marketing manager for Optical products
This was an overview of the technologies available for long distance connections for disaster recovery,business continuity, and resilience. He covered three levels.
IP - Fibre Channel of IP (FCIP) offers the greatest "global" distance but forces people into asynchronous mirroring.
SONET/SDH - SONET is what we call it in the USA, and SDH is what it is called in other countries. This provides state-to-state or "out-of-region" distances, which is ideal to meet certain government regulations for homeland defense. He suggests this is offered when dark fiber or DWDM is not available.
DWDM/CWDM - this is using a prism to run multiple colors of light through a single fiber optic cable. CWDM ischeaper, but only handles 8 signals per cable. DWDM can handle 32 to 160 signals per cable, but is more expensive.
His rule of thumb: one buffer credit for every kilometer at 2Gbps speed (for every 2km at 1Gbps).
The day ended at the "Expo". I hung out at the IBM booth to help answer questions and network with others.
Yesterday morning, the entire country of Colombia suffered their worst black-out (power outage) in 22 years. 98% of the country was out for 4 1/2 hours.This is just 5 months after an outage that hit 25% of the country, December 7, 2006.Ironically, this one happened the week I am here explaining the need for Business Continuity plans to IBM Business Partners from Argentina, Peru, Velenzuela, Ecuador and Colombia. As is oftenthe case, people often need a real example to recognize the need for planning is important.
It reminded me of the Northeast Black-out of 2003 that impacted USA and Canada. I was speaking to a crowd of 800 people at the SHARE conference in Washington D.C. when it happened, and hundreds of pagers and cell-phones went off all at the same time. Although we were outside the effected area and had plenty of lighting, we ended up canceling therest of my talk, and many people left immediately to help execute their business continuity plans.Of course, terrorism was immediately assumed, but a final report showed that it was initiated in Ohiodue to overgrown trees, and then propagated due to a software bug to hundreds of other plants.
According to this morning's Bogota newspaper, "El Tiempo", nobody knows the root cause of yesterday's outage. Immediately, the country's leftist rebels were blamed, but now the leading theory is that it was initiated byoperator error (a technician touching something he shouldn't have), and then propagated by a faulty distribution system.
Another example of the need for a robust and resilient infrastructure, and appropropriate business continuity plans.
One of the differences between IBM and the other storage vendors is that IBM is also in the business of middleware, application-aware backup software, and advanced copy services. This allows IBM to put togethersolutions that work to address specific challenges for our clients.
IBM has written a whitepaper on a cleverVSS Snapshot Backup for Exchange using IBM Tivoli Storage Manager and the point-in-time copy capabilities of IBM System Storage disk systems.
A problem in the past was that each vendor's point-in-time copy method had its own unique proprietary interface.Microsoft Developed Volume Shadow Copy Services (VSS) as a common interface front-end to resolve this concern.IBM Tivoli Storage Manager for Mail can invoke standard VSS interfaces, and this in turn can invoke FlashCopyon the IBM System Storage SAN Volume Controller, DS8000 series, or DS6000 series disk system.
You might be thinking: Wouldn't it have been less effort to just have TSM for Mail invoke IBM proprietary interfaces,rather than having to put full VSS support into TSM for mail, and then full VSS support into IBM's various disksystems? Perhaps, but IBM doesn't decide to do things because it is the cheapest way, we focus on what is theright way, and in this case, customers now have more choices, then can use TSM for Mail with IBM or non-IBM disksystems that support the VSS interface, and IBM disk systems can be employed into other uses for VSS snapshot.
Of course, we would like our clients to consider both TSM and IBM System Storage disk systems for a combined solution,not because they are required to make the solution work, but because both are best-of-breed, and whitepapers likethis show how they can provide synergy working together.
Last week, I opined that Monday's IDC announcement "IBM #1 in combined disk and tape storage hardwaresales for 2006" was in part because of a resurgence of interest in tape, with four specific examples. There was a lot of reaction and reflection fromboth sides.
On the one side...
EMC blogger Mark Twomey at Storagezilla admits that perhapsTape Isn't Dead after all,is perhaps the best place to put long-term archive data, but not for backup? EMC's "creative marketing types" put out this Fun With Tape video that I found amusing. (It asks for a first name,last name, and e-mail address, which are then embedded into the resulting video itself, and perhaps forwarded to your nearest EMC sales rep, so answer according to your wishes for privacy).
The "mummy wrapped in tape media" seems to be a common theme, and shows up again in LiveVault'svideo with John Cleese, which makes the same argument asthe EMC video above, namely: switch your backups from tape to disk because we are a disk-only vendor.
... and on the other side
JWT over at DrunkenData asks Which is greener, disk or tape?Tape is, of course, by a long shot, and an essential part of IBM's Big Green initiative, a project to invest$1US Billion dollars per year for data centers to be more efficient for power and cooling.
Sun/StorageTek blogger Randy Chalfant questions the Death of Tape, and argues thatdisk-only solutions suffer from atrophy.The results he posts from a survey of 200 customers are similar to those we've seen with customers using IBM TotalStorage Productivity Center, our software to help evaluate data usage, and identify misuse, in your data center.
To my readers in the USA, United Kingdom, Ireland, South Africa, China and Japan, and a few other countries, Happy Father's Day!
I've blogged about some of these videos already, but since there are probably a few out there buying the brand new Apple iPhone looking for YouTube videos to play on them, these links might provide some exampleentertainment on your new handheld device.
Next week has "Fourth of July" Independence Day holiday in the USA smack in the middle of the week, so I suspect the blogosphereto quiet down a bit. So whether you are working next week or not, in the USA or elsewhere, take some time to enjoy your friends and family.
Seth Godin has an interesting post titled Times a Million.He recounts how many people determine the fuel savings of higher-mileage cars to be only $300-$900 per year,and that this is not enough to motivate the purchase of a more-efficient vehicle, such as a hybrid orelectric car. Of course, if everyone drove more efficient vehicles, the benefits "times a million" wouldbenefit everyone and the world's ecology.
When I discuss storage-related concepts, many executives mistakenly relate them to the one area of information technologythey know best: their laptop. Let's take a look at some examples:
Information Lifecycle Management
Information Lifecycle Management (ILM) includes classifying data by business value, and then using this to determineplacement, movement or deletion. If you think about the amount of time and effort to review the files on yourindividual laptop, and to manually select and move or delete data, versus the benefits for the individual laptopowner, you would dismiss the concept. Most administrative tasks are done manually on laptops, because automatedsoftware is either unavailable or too expensive to justify for a single owner.
In medium and large size enterprises, automated software to help classify, move and delete data makes a lot of sense.Executives who decide that ILM is not for their data center, based on their experiences with their laptop, are losingout on the "times a million" effect.
Laptops have various controls to minimize the use of battery, and these controls are equally available when pluggedin. Many users don't bother turning off the features and functions they don't need when plugged in, because theyfeel the cost savings would only amount to pennies per day.
Times a million, energy savings do add up, and options to reduce the amount used per server, per TB of data stored, not only save millions of dollars per year, but can also postpone the need to build a new data center, or upgrade the electrical systems in your existing data center.
Backup and Disaster Recovery planning
I am not surprised how many laptops do not have adequate backup and disaster recovery plans. When executives thinkin terms of the time and effort to backup their data, often crudely copying key files to CDrom or USB key, and worryingabout the management of those copies, which copies are the latest, and when those copies can be destroyed, theymight reject deploying appropriate backup policies for others.
Times a million, the collected data stored on laptops could easily be half of your companies emails and intellectual property. Products like IBM Tivoli Storage Manager can manage a large number of clients with a few administrators,keeping track of how many copies to keep, and how long to keep them.
So, next time you are looking at technology or solutions for your data center, don't suffer from "Laptop Mentality". Focus instead on the data center as a whole.
This week and next I am touring Asia, meeting with IBM Business Partners and sales repsabout our July 10 announcements.
Clark Hodge might want to figure out where I am, given the nuclearreactor shutdowns from an earthquake in Japan. His theory is that you can follow my whereabouts just by following the news of major power outages throughout the world.
So I thought this would be a good week to cover the topic of Business Continuity, which includes disaster recovery planning. When making Business Continuity plans, I find it best to work backwards. Think of the scenarios that wouldrequire such recovery actions to take place, then figure out what you need to have at hand to perform the recovery, and then work out the tasks and processes to make sure those things are created and available when and where needed.
I will use my IBM Thinkpad T60 as an example of how this works. Last week, I was among several speakers making presentations to an audience in Denver, and this involved carrying my laptop from the back of the room, up to the front of the room, several times. When I got my new T60 laptop a year ago, it specifically stated NOT to carry the laptop while the disk drive was spinning, to avoid vibrations and gyroscopic effects. It suggested always putting the laptop in standby, hibernate or shutdown mode, prior to transportation, but I haven't gotten yet in the habit of doing this. After enough trips back and forth, I had somehow corrupted my C: drive. It wasn't a complete corruption, I could still use Microsoft PowerPoint to show my slides, but other things failed, sometimes the fatal BSOD and other times less drastically. Perhaps the biggest annoyance was that I lost a few critical DLL files needed for my VPN software to connect to IBM networks, so I was unable to download or access e-mail or files inside IBM's firewall.
Fortunately, I had planned for this scenario, and was able to recover my laptop myself, which is important when you are on the road and your help desk is thousands of miles away. (In theory, I am now thousands of miles closer to our help desk folks in India and China, but perhaps further away from those in Brazil.) Not being able to respond to e-mail for two days was one thing, but no access for two weeks would have been a disaster! The good news: My system was up and running before leaving for the trip I am on now to Asia.
Following my three-step process, here's how this looks:
Step 1: Identify the scenario
In this case, my scenario is that the file system the runs my operating system is corrupted, but my drive does not have hardware problems. Running PC-Doctor confirmed the hardware was operating correctly. This can happen in a variety of ways, from errant application software upgrades, malicious viruses, or in my case, picking up your laptop and carrying it across the room while the disk drive is spinning.
Step 2: Figure out what you need at hand
All I needed to do was repair or reload my file sytem. "Easier said than done!" you are probably thinking. Many people use IBM Tivoli Storage Manager (TSM) to back up their application settings and data. Corporate include/exclude lists avoid backing up the same Windows files from everyone's machines. This is great for those who sit at the same desk, in the same building, and would be given a new machine with Windows pre-installed as the start of their recovery process. If on the other hand you are traveling, and can't access your VPN to reach your TSM server, you have to do something else. This is often called "Bare Metal Restore" or "Bare Machine Recovery", BMR for short in both cases.
I carry with me on business trips bootable rescue compact discs, DVDs of full system backup of my Windows operating system, and my most critical files needed for each specific trip on a separate USB key. So, while I am on the road, I can re-install Windows, recover my applications, and copy over just the files I need to continue on my trip, and then I can do a more thorough recovery back in the office upon return.
Step 3: Determine the tasks and processes
In addition to backing up with IBM TSM, I also use IBM Thinkvantage Rescue and Recovery to make local backups. IBM Rescue and Recovery is provided with IBM Thinkpad systems, and allows me to backup my entire system to an external 320GB USB drive that I can leave behind in Tucson, as well as create bootable recovery CD and DVDs that I can carry with me while traveling.
The problem most people have with a full system backup is that their data changes so frequently, they would have to take backups too often, or recover "very old" data. Most Windows systems are pre-formatted as one huge C: drive that mixes programs and data together. However, I follow best practice, separating programs from data. My C: drive contains the Windows operating system, along with key applications, and the essential settings needed to make them run. My D: drive contains all my data. This has the advantage that I only have to backup my C: drive, and this fits nicely on two DVDs. Since I don't change my operating system or programs that often, and monthly or quarterly backup is frequent enough.
In my situation in Denver, only my C: drive was corrupted, so all of my data on D: drive was safe and unaffected.
When it comes to Business Continuity, it is important to prioritize what will allow you to continue doing business, and what resources you need to make that happen. The above concepts apply from laptops to mainframes. If you need help creating or updating your Business Continuity plan, give IBM a call.
Continuing this week's theme on Business Continuity, I thought I would explore more on the identification of scenarios to help drive appropriate planning. As I mentioned in my last post, this should be done first.
A recent post in Anecdote talks about the long list of cognitive biases which affect business decision making. This list is a good explanation of why so many people have a difficult time identifying appropriate recovery scenarios as the basis for Business Continuity planning. Their "cognitive biases" get in the way.
Again, using my IBM Thinkpad T60 laptop as an example, here are a variety of different scenarios:
Corrupted File System
Some file systems are more fragile than others. If your NTFS file system gets corrupted, you might be able to run
CHKDSK C: /F
but this just puts damaged blocks into dummy files, it doesn't really repair your files back to their pre-damage level.All kinds of things can damage the file system, including viruses, software defects, and user error.
I keep my programs and data in separate file systems. C: has my Windows operating system and applications, and D: holds my pure data. If one file system is corrupted, the other one might be in tact, mitigating the risk.
Hard Disk Crash
Hopefully, you will have temporary read/write errors to provide warning prior to a complete failure. In theory, if I kept a spare hard disk in my laptop bag, I could swap out the bad drive with the good drive. I don't have that. The three times that I have had a disk failure all occurred while I was in Tucson.
Instead, I keep the few files I need for my trip on a separate USB key, and carry bootable Live CD, which allows you to boot entirely from CDrom drive, either to run applications, or perform rescue operations.
The latest one that I am trying out is Ubuntu Linux, which has OpenOffice 2.2 that can read/write PowerPoint, Word, and Excel spreadsheets; Firefox web browser; Gimp graphics software; and a variety of other applications, all in a 700MB CDrom image. I even have been able to get Wireless (Wi-Fi) working with it, and the process to create your own customized Live CD with the your own application packages is fairly straightforward. Combined with a writeable USB key, you can actually get work done this way. Special thanks to IBM blogger Bob Sutor for pointing me to this.
(If you have a DVD-RAM drive, there are bigger Live CDs from SUSE and RedHat Fedora that provide even more applications)
Laptop Shell Failure
This might catch some people by surprise. I have had the keyboard, LCD screen, or some essential port/plug fail on my laptop. The disk drive and CDrom drive work fine, but unless you have another "laptop" to stick them into, they don't help you recover. This can also happen if the motherboard fails, or the battery is unable to hold a charge.
IBM provides a 24-hour turn around fix. Basically, IBM sends me a laptop shell, no drive, no CDrom, with instructions to move the disk drive and CDrom drive from your broken shell, to the new shell, then send the bad shell back in the same shipping box.
Here, again, I am thankful that I keep my key files on an USB key. Often I travel with other IBMers, and can borrow their laptop to make presentations, check my e-mail, or other work, until I can get my replacement shell. In you are travelling outside the US, you might be able to move your disk drive into a colleague's laptop, access the data, copy it to your USB key or burn a copy on CD or DVD.
In a data center, many outages are really "failures to access data", but the data is safe. For example, power outages, network outages, and so on, can prevent people from using their IT systems, but the data is safe when these are re-established.
At times, I have been temporarily separated from my laptop. Three examples:
A higher level executive had technical difficulties with his laptop, and usurped mine instead.
A colleague forgot his power supply for his laptop, and borrowed my laptop instead. (I wish there were a standard for laptop power plug connectors)
Customs agents confiscate your laptop, give you a receipt, and eventually you get it back.
In all cases, I was glad that no "recovery" was required, and that the few files I needed were on my USB key. A few times, I was able to get by on the machines available at the nearest Internet Cafe, in the meantime.
With some imagination, you can recognize that this scenario is similar to the previous one for laptop shell failure.Here is a good example that you can identify different scenarios, and then later discover they have similar properties in terms of recovery, and can be treated as one.
Laptops are stolen every day. Luckily, I've only had this happen twice to me in my career at IBM, and I managed to get a replacement soon enough. The key lesson here is to keep your USB key and recovery media in separate luggage.I know it is more convenient to keep all computer-related stuff in one place, but a thief is going to take your whole laptop bag, to make sure that all cables and power supplies are included, and is not going to leave anything behind. That would just slow them down.
In each case, some brainstorming, or personal experience, can help identify scenarios, identify what makes them unique from a recovery perspective, and plan accordingly. If you looking to create or upgrade your Business Continuity plan, give IBM a call, we can help!
Continuing this week's theme on Business Continuity, I will use this post to discuss this week'sIBM solid state disk announcement.This new offering provides a new way to separate programs from data, to help minimizedowntime and outages normally associated with disk drive failures.
Until now, the method most people used to minimize the amount of data on internalstorage was to use disk-less servers with Boot-Over-SAN, however, not all operating systems, and not all disk systems, supported this.
Windows, however, is not supported, because of the small 4GB size and USB protocol limitations. For Windows, you would add a SAS drive, you boot from this hard drive, and use the 4GB Flash drive for data only.
So what's new this time? Here's a quick recap of July 17 announcement. For the IBM BladeCenter HS21 XM blade servers, new models of internal "disk" storage:
Single drive model
A single 15.8GB solid-state disk drive, based on SATA protocol. In addition to theLinux operating systems mentioned above, the capacity and SATA protocols allowsyou to boot 32-bit and 64-bit versions of Windows 2003 Server R2, with plans in placeto other platforms in the future, such as VMware. I am able to run my laptop Windows with only 15GB of C: drive, separating my data to a separate D: partition, so this appears to be a reasonable size.
Dual drive model
The dual drive fits in the space of a single 2.5-inch HDD drive bay.You can combine these in either RAID 0 or RAID 1 mode.
RAID 0 gives you a total of 31.6GB, but is riskier. If you lose either drive,you lose all your data. Michael Horowitz of Cnet covers the risks of RAID zerohere andhere.However, if you are just storing your operating system and application, easily re-loadable from CD or DVD in the case of loss, then perhaps that is a reasonable risk/benefit trade-off.
RAID 1 keeps the capacity at 15.8GB, but provides added protection. If you loseeither drive, the server keeps running on the surviving drive, allowing you to schedule repair actions when convenient and appropriate. This would be the configuration I would recommend for most applications.
Until recently, solid state storage was available at a price premium only. Flash prices have dropped 50% annually while capacities have doubled. This trend is expected to continue through 2009.
According to recent studies from Google and Carnegie Mellon, hard drives fail more oftenthan expected. By one account, conventional hard disk drives internal to the server account for as much as 20-50% of component replacements.IBM analysis indicates that the replacement rate of a solid state drive on a typical blade server configuration is only about 1% per year, vs. 3% or more mentionedin the these studies for traditional disk drives.
Flash drives use non-volatile memory instead of moving parts, so less likely to break down during high external environmental stress conditions, like vibration and shock, or extreme temperature ranges (-0C° to +70°C) that would make traditional hard disks prone to failure.This is especially important for our telecommunications clients, who are always looking for solutions that are NEBS Level 3 compliant.
As with any SATA drive, performance depends on workload.Solid state drives perform best as OS boot devices, taking only a few secondslonger to boot an OS than from a traditional 73GB SAS drive. Flash drives also excel in applications featuring random read workloads, such as web servers. For random and sequential write workloads, use SAS drives instead for higher levels of performance.
Part of IBM's Project Big Green, these flash drives are very energy efficient. Thanks to sophisticated power management software, the power requirement of the solid state drive can be 95 percent better than that of a traditional 73GB hard disk drive. These 15.8GB drives use only 2W per drive versus as much as 10W per 2.5” hard drive and 16W per 3.5” hard drive. The resulting power savings can be up to 1,512 watts per server rack, with 50% heat reduction.
So, even though this is not part of the System Storage product line, I am very excitedfor IBM. To find out if this will work in your environment, go to the IBM Server Provenwebsite that lists compatability with hardware, applications and middleware, or review the latest Configuration and Options Guide (COG).
Wrapping up my week's discussion on Business Continuity, I've had lots of interest in myopinion stated earlier this week that it is good to separate programs from data, and thatthis simplifies the recovery process, and that the Windows operating system can fit in a partition as small asthe 15.8GB solid state drive we just announced for BladeCenter. It worked for me, and I will use this post to show you how to get it done.
Disclaimer: This is based entirely on what I know and have experienced with my IBM Thinkpad T60 running Windows XP, and is meant as a guide. If you are running with different hardware or different operating system software, some steps may vary.
(Warning: Windows Vista apparently handles data, Dual Boot, andPartitions differently. These steps may not work for Vista)
For this project, I have a DVD/CD burner in my Ultra-Bay, a stack of black CDs and DVDs, and a USB-attached 320GB external disk drive.
I like to backup the master boot record to one file, and then the rest of the C: drive to a series of 690MB compressed chunks. These can be directed to the USB-attached drive, and then later burned onto CDrom, or pack 6 files per DVD.Most USB-attached drives are formatted to FAT32 file system, which doesn't support any chunks greater than 2GB, so splitting these up into 690MB is well below that limit.
You can learn more about these commands here and here.
Step 1 - Defrag your C: drive
From Windows, right-click on your Recycle Bin and select "Empty Recycle Bin".
Click Start->Programs->Accessories->System Tools->Disk Defragmenter. Select C: drive and push the Analyze button. You will see a bunch of red, blue and white vertical bars. If there are any greenbars, we need to fix that. The following worked for me:
Right-click "My Computer" and select Properties. Select Advanced, then press "Settings" buttonunder Performance. Select Advanced tab and press the "Change" button under Virtual Memory.Select "No Paging File" and press the "Set" button. Virtual memory lets you have many programs open, moving memory back and forth between your RAM and hard disk.
Click Start->Control Panel->Performance and Maintenance->Power Options. On the Hibernate tab,make sure the "Enable Hibernation" box is un-checked. I don't use Hibernate, as it seems likeit takes just as long to come back from Hibernation as it does to just boot Windows normally.
Reboot your system to Windows.
If all went well, Windows will have deleted both pagefile.sys and hiberfil.sys, the twomost common unmovable files, and free up 2GB of space. You can run just fine without either of these features, but if you want them back, we will put them back on Step 6 below.
Go back to Disk Defragmenter, verify there are no green bars, andproceed by pressing the "Defragment" button. If there are still some green bars,you can proceed cautiously (you can always restore from your backup right?), or seek professional help.
Step 2 - Resize your C: drive
When the defrag is done, we are ready to re-size your file system. This can be done with commercial software like Partition Magic.If you don't have this, you can use open source software. Burn yourself the Gparted LiveCD.This is another Linux LiveCD, and is similar to Partition Magic.
Either way, re-size the C: drive smaller. In theory, you can shrink it down to 15GB if this is a fresh install of Windows, and there is no data on it. If you have lots of data, and the drive wasnearly full, only resize the C: drive smaller by 2GB. That is how much we freed upfrom the unmovable files, so that should be safe.
You could do steps 2 and 3 while you are here, but I don't recommend it. Just re-size C:press the "Apply" button, reboot into Windows, and verify everything starts correctly before going to the next step.
Step 3 - Create Extended Paritition and Logical D: drive
You can only have FOUR partitions, either Primary for programs, or Extended for data. However, theExtended partition can act as a container of one or more logical partitions.
Get back into Partition Magic or Gparted program, and in the unused space freed up from re-sizing inthe last step, create a new extended/logical partition. For now, just have one logical inside theextended, but I have co-workers who have two logical partitions, D: for data, and E: for their e-mailfrom Lotus Notes. You can always add more logical partitions later.
I selected "NTFS" type for the D: drive. In years past, people chose the older FAT32 type, but this has some limitations, but allowed read/write capability from DOS, OS/2, and Linux.Windows XP can only format up to 32GB partitions of FAT32, and each file cannot be bigger than 2GB.I have files bigger than that. Linux can now read/write NTFS file systems directly, using the new NTFS-3Gdriver, so that is no longer an issue.
Step 4 - Format drive D: as NTFS
Just because you have told your partitioning program that D: was NTFS type, you stillhave to put a file system on it.
Click Start->Control Panel->Performance and Maintenance->Computer Management. Under Storage, select Disk Management. Right-click your D: drive and choose format.Make sure the "Perform Quick Format" box is un-checked, so that it peforms slowly.
Step 5 - Move data from C: to D: drive
Create two directories, "D:\documents" and "D:\notes\data", either through explorer, or in a commandline window with "MKDIR documents notes\data" command.
Move files from c:\notes\data to d:\notes\data, and any folder in your "My Documents" over to d:\documents.
(If you have more data than the size of the D: drive, copy over what you can, run another defrag, resize your C: drive even smaller with Partition Magic or Gparted, Reboot, verify Windows is still working,resize your D: bigger, and repeat the process until you have all of your data moved over.)
To inform Lotus Notes that all of your data is now on the D: drive, use NOTEPAD to edit notes.ini and change the Directory line to "Directory=D:\notes\data". If you have a special signature file, leave it in C:\notes directory.
Once all of your data is moved over to D:\documents, right-click on "My Documents" and select Properties. Change the target to "D:\documents" and press "Move" button. Now, whenever you select "My Documents", youwill be on your D: drive instead.
Step 6 - Take A Fresh Backup
If you use IBM Tivoli Storage Manager, now would be a good time to re-evaluate your "dsm.opt" file that listswhat drives and sub-directories to backup. Take a backup, and verify your data is being backed up correctly.
With the USB-attached, backup both C: and D: drives. I leave my USB drive back in Tucson. For a backup copywhile traveling, go to IBM Rescue and Recovery and take a C:-only backup to DVD. Make sure D: drive box is un-checked. Now, if I ever need to reinstall Windows, because of file system corruption or virus, I can do this from my one bootable CD plus 2 DVDs, which I can easily carry with me in my laptop bag, leaving all my data on the D: drive in tact.
In the worst case, if I had to re-format the whole drive or get a replacement disk, I can restore C: and thenrestore the few individual data files I need from IBM Tivoli Storage Manager, or small USB key/thumbdrive,delaying a full recovery until I return to Tucson.
Lastly, if you want, reactivate "Virtual Memory" and "Hibernation" features that we disabled in Step 1.
As with Business Continuity in the data center, planning in this manner can help you get back "up and running"quickly in the event of a disaster.
I am back at "the Office" for a single day today. This happens often enough I need a name for it.Air Force pilots that practice landing and take-offs call them "Touch and Go", but I think I needsomething better. If you can think of a better phrase, let me know.
This week, I was in Hartford, CT, Somers, NY and our Corporate Headquarters in Armonk, in a varietyof meetings, some with editors of magazines, others with IBMers I have only spoken to over the phone andfinally got a chance to meet face to face.
I got back to Tucson last night, had meetings this morning in Second Life, then presented "InformationLifecycle Management" in Spanish to a group of customers from Mexico, Chile, and Brazil. We have a great Tucson Executive Briefing Center, and plenty of foreign-language speakers to draw from our localemployees here at the lab site.
Sunday, I leave for Las Vegas for our upcoming IBM Storage and Storage Networking Symposium. We will cover the latest in our disk, tape, storage networking and related software.Do you have your tickets? If you plan to attend, and want to meet up with me, let me know.
The IBM Storage and Storage Networking Symposium in Las Vegas continues ...
N series and VMware
Jeff Barnett presented how VMware manages disk image files in its VMfs repository, and how N series offersa better alternative. Virtual machines can access N series volumes directly.
Business Continuity with System i
Allison Pate presented the various Business Continuity options for System i. Many customersuse internal storage for System i, but this then hampers Business Continuity efforts. Instead,you can have IBM System Storage DS8000 or DS6000 series disk systems provide disk mirroringbetween clustered systems.
There was a lot of interest in DR550, one of our many compliance storage solutions. Ron Henkhauspresented an overview of our DR550 and DR550 Express offerings. Unlike the competitive disk-onlysolutions, such as the EMC Centera, the DR550 allows you to attach an automated tape library, managing large amounts of fixed content data at a much lower cost point. It also has encryption, for both diskand tape data.
Open Systems Disk Management
Siebo Friesenborg presented the various steps needed to troubleshoot performance problemswith open systems, including the use of "iostat" on AIX systems as an example, and the stepsyou can take to make formal Service Level Agreements (SLA) between the IT department and thevarious lines of business.
IBM Encryption - TS1120 and LTO-4 encryption comparison
Tony Abete presented TS1120 and LTO-4 encryption techniques. Deploying encryption is more thanjust choosing a tape drive. There are a variety of factors involved, such as whether to managethe keys from the application, the operating system, or the library manager. You need policiesto decided when to encrypt tapes and when not to, generating your keys, storing them, and sharingthem with your business partners, suppliers and service providers with which you send tapes.
I can tell that many people are feeling like they are "drinking from a firehose".IBM's success in storage reaches out to so many different aspects of information management,a variety of industries, and disciplines as varied as regulatory compliance and medical imaging.
The IBM Storage and Storage Networking Symposium concludes today. As typical for manysuch conferences, it ended at noon, so that people can catch airline flights.
TS1120 Tape Encryption - Customer Experiences
Jonathan Barney had implemented many deployments of tape encryption, and shared hisexperiences at two customer locations.
The first company had decided to implement their EKM servers on dedicated 64-bitWindows servers. They had three sites, one in Chicago, Alphareta, and New York City,each with two EKM servers. Each library had a single TS3500 tape library, and pointedto four EKM servers, two local, and two remote.
The clever trick was managing the keystore. They decided that EKM-1 was their trustedsource, made all changes to that, and then copied it to the other five EKM servers.His team deployed one site at a time, which turned out to be ok, but he would notrecommend it. Better to design your complete solution, and make sure that all librariescan access all EKM servers.
This company decided to have a single key-label/key-pair for all three locations, but change it every 6 months. You have to keep the old keys for as long as you have tapesencrypted with those keys, perhaps 10-20 years.The customer found the IBM encryption implementation "elegant" and it can be easily replicated to a fourth site if needed.
The second company had both z/OS and Sun Solaris. Initially they planned to have botha hardware-based keystore on System z, and software-based keystore on Sun, but they realized that System z version was so much more secure and reliable, that it made nosense to have anything on the Sun Solaris platform.
On System z, they had two EKM images, and used VIPA to ensure load balancing fromthe library. Tapes written from z/OS used DFSMS Data Class to determine which tapesare encrypted and which aren't. All Tapes written from Sun Solaris were encryptied, written to a separate logical library partition of the TS3500, which in turn contactedthe System z for the EKM management to provide the keys to use for the encryption.
The "gotcha" for this case was that when they tested Disaster Recovery, they had torecover the two EKM servers first, before any other restores could take place, and thistook way too long. Instead, they developed a scaled-down 10-volume "rescue recovery" z/OS image that would contain the RACF database and all EKM related software to actas the keystore during a disaster recovery. Anytime they make updates, they only haveto dump 10 volumes to tape. Restore time is down to only 2 hours.
He gave this advice to deploy tape encryption:
Some third party z/OS security products, like Computer Associates Top Secret orACF2, require some PTFs to work with the EKM. The latest IBM RACF is good to go.
Getting IP support from IOS to OMVS requires IPL.
At one customer, an OMVS monitor software program killed the EKM because it wasn'tin their list of "acceptable Java programs". They updated the list and EKM ran fine.
DO not update EKM properties file while EKM is running. EKM keeps a lot of stuffin memory, and when it is recycled, copies this back to the EKM properties file, reversing any changes you may have done. It is best to shut down EKM, update theproperties file, then start up EKM back up again. This is why you should always haveat least two EKM servers for redundancy.
TSM for Linux on System z
Randy Larson from our Tivoli group presented this session.There is a lot of interest in deploying IBM Tivoli Storage Manager backup and archivesoftware on Linux for System z. Many customers are already invested in a mainframeinfrastructure, may have TSM for z/OS or z/VM, and want the newer features and functions that are available for TSM on Linux.
TSM has special support for Lotus Domino, Oracle, DB2 and WebSphere Application Servers.TSM clients can send backup data to a TSM server internally via Hipersockets, a virtualLAN feature on the System z platform that uses shared memory to emulate TCP/IP stack.
One of the big questions is whether to run Linux as guests under z/VM, or natively onLPAR. The general deployment is to carve an LPAR and run Linux natively untilyour server and storage administration staff have taken z/VM training classes. Oncetrained, they can easily move native LPAR images to z/VM guests. Unlike VMware that takesa hefty 40% overhead on x86 platforms to manage guests, z/VM only takes 5-10% overhead.
For the TSM database and disk storage pools, Randy recommends FC/SCSI disk, with ext3 file system, combined with LVM2 into logical volumes. ECKD disk and reiserfsworks too. Avoid use of z/VM minidisks. Under LVM2, consider 32KB stripes for the TSM database, and 256KB stripes for the disk storage pools. For multipathing, usefailover rather than multibus method. Read IC45459 before you activate "directio".
The TSM for Linux on z is very much like the TSM on AIX or Windows, and not like theTSM for z/OS. For tape, TSM for Linux on z does not support ESCON/FICON attached tape,you need to use FC/SCSI attached tape and tape libraries. TSM owns the library anddrives it uses, so give it a logical library partition separate from z/OS. ForSun/StorageTek customers, TSM works with or without the Gersham Enterprise Distrbu-Tape(EDT) software. Use the IBM-provided drivers for IBM tape. For non-IBM tape, TSM providessome drivers that you can use instead.
That wraps up my week. This was a great conference! If you missed it, look for the one in Montpelier, France this October. Check out the list of IBM Technical Conferencesto find others that might interest you.
A few weeks ago, my Tivo(R) digital video recorder (DVR) died. All of my digital clocks in my house were flashing 12:00 so I suspect it wasa power strike while I was at the office. The only other item to die was the surge protector,and so it did what it was supposed to do, give up its own life to protect the rest of myequipment. Although somehow, it did not protect my Tivo.
I opened a problem ticket with Sony, and they sent me instructions on how to send itover to another state to get it repaired.Amusingly, the instructions included "Please make a backup of the drive contents beforesending the unit in for repair." Excuse me? How am I supposed to do that, exactly?
My model has only a single 80GB drive, and so my friend and I removed the drive and attachedit to one of our other systems to see if anything was salvageable. It failed every diagnostictest. There was just not enough to read to be usable elsewhere.
This is typical of many home systems. They are not designed for robust usage, high availability, nor any form of backup/recovery process. Some of the newer models havetwo drives in a RAID-1 mode configuration, but most have many single points of failure.
And certainly, it is not mission critical data. Life goes on without the last few episodesof Jack Bauer on "24", or the various Food Network shows that I recorded for items I planto bake some day. For the past few weeks, I have spent more time listening to the radioand reading books. Somehow, even though my television runs fine without my Tivo, watchingTV in "real time" just isn't the same.
I suspect that if you gave someone a method to do the backup, most would not bother to useit. People are now relying more and more heavily on their home-basedinformation storage systems, digital music, video and cherished photographs. Perhaps experiencing a "loss" will help them appreciate backup/recovery systems so much more than they do today.
To get beyond the simple statistics of vendor popularity, we looked at the number and combinations of vendors with which enterprises work. Many were customers of one or two storage providers, but the rest were customers of up to six storage providers. More than one-third were customers of systems vendors only, bypassing storage specialists.
Comparisons between solutions vendors and storage component vendors are not new. One could argue that this can be compared to supermarkets and specialty shops.
Supermarkets offer everything you need to prepare a meal. You can buy your meat, bread, cheese,and extras all with one-stop shopping. In a sense, IBM, HP, Sun and Dell are offering this to clients who prefer this approach. Not surprisingly, the two leaders in overall storage hardware,IBM and HP, are also the two best to offer a complete set of software, services, servers and storage.
IBM and HP are also the leaders in tape.While Forrester reports that many large enterprises in North America prefer to buy diskfrom storage specialists, others have found that customers prefer to buy their tape from solution providers. Recently, Byte and Switch reports thatLTO Hits New Milestones,where the LTO consortium (IBM, HP, and Quantum) have collectively shipped over 2 million LTO tape drives, and over 80 million LTO tape cartridges. Perhaps this is because tape is part of an overallbackup, archive or space management solution, and customers trust a solution vendor overa storage specialist.
Where possible, IBM brings synergy between its servers and storage. For example, we justannounced the IBM BladeCenter Boot Disk System, a 2U high unit that supports up to 28 blade servers, ideal for applications running under Windows or Linux, and helping to reduce the energy consumption for thoseinterested in a "Green" data center.
Some people prefer buying their meat at the slaughterhouse, bread at the French pastry shop, andso on. Storage specialists focus on just storage, leaving the rest of the solution, like servers,to be purchased separately from someone else. Storage vendors like NetApp, EMC, HDS and othersoffer storage components to customers that like to do their own "system integration", or to thosethat are large enough to hire their own "systems integrator".
Storage specialists recognize that not everybody is a "specialty shop" shopper.HDS has done well selling their disk through solution vendorslike HP and Sun. EMC sells its gear through solution vendor Dell.
Interestingly, I have met clients who prefer to buy IBM System Storage N series from IBM, becauseIBM is a solution vendor, and others that prefer to buy comparable NetApp equipment directly fromNetApp, because they are a storage component vendor.
I mostly buy my groceries at a supermarket, buthave, on occasion, bought something from the local butcher, baker or candlestick maker. And if you are ever in Tucson, you might be able to find Mexican tamalessold by a complete stranger standing outside of a Walgreens pharmacy, the ultimate extreme of specialization. You can get a dozen tamales for tenbucks, and in my experience they are usually quite good. Theoretically, if you get sick, or they don't taste right, you have no recourse, and will probably never see that stranger again to complain to.(And no, before I get flamed, I am not implying any major vendor mentioned above is like this tamale vendor)
Of course, nothing is starkly black and white, and comparisons like this are just to help provide context and perspective,but if you are looking to have a complete IT solutionthat works, from software and servers to storage and financing, come to the vendor you can trust, IBM.
Well, it is Halloween back in the USA. I am in Seoul Korea this week, so it is already Thursday, November 1st here, but thought I would comment on Colin Barker's piece in ZDnet titled[SNW offers the frights].The article starts out with an oversimplification:
The storage industry is enjoying a boom currently thanks to the requirement for IT managers to keep everything. With the possibility of being sued any time by any company for no good reason at all, everyone is keeping everything, or at least all their data. Result? Loads and loads more kit being bought to the benefit of EMC, IBM, HP and every other supplier with any kind of storage product.
While its true that IBM System Storage grew yet again in 3Q07, exceeding our own internal business model, I would not call this an overall "boom" for the storage industry. While companies are growing in "TB capacity" by 30-50%, this translates only to single digit growth in terms of "Dollar revenues". This is because we continue to make storage with declining dollar-per-GB.
One should not confuse what people do with what people are required to do. I am not a lawyer, but most regulations pertaining to storage of information state that certain records need to be kept for a set amount of time, either a fixed period of years, or based on some event. For example, broker/dealers need to keep emails of their clients for six years after the client closes their brokerage account. After those six years, the records can be destroyed.
Unfortunately, many IT managers look at the laws and come up with the simplest solution: keep everything forever. While this might meet the regulators audit requirements, it does expose their employer to subpoenas for data that should have been deleted, and may not be very cost-effective.
The alternative for many IT managers involves having to leave their comfort zone, and talk to their legal counsel, the lines of business, and try to classify their data, determine a set of policies, and inact some forms of enforcement. This is perhaps the "scary" part of the storage of information, it has grown outside the walls of IT, forcing IT managers to interact with the rest of the business to get their jobs done.
Compliance is the only game in town and that is most certainly where the money is.
Anytime an analyst tells you that something is the "only game in town", they are usually wrong. In this case, IBM has had great success in other areas that are not compliance-related. For example, digital video surveillance (DVS) is being used not only to help reduce shoplifting, but also to help identify patterns in customers perusing through aisles and window-shopping. Identifying what people are interested in has proven effective in moving product displays around to better attract buyers and motivate them to make purchases.
Take, the keynote from Andy Monshaw, general manager of IBM storage, and thus a man who is very much in a position to know. He spent his allotted 30 minutes, or whatever, listing all the security, compliance, threats and related issues that are currently making the jobs of most IT manager a cause for concern. Now, there is an argument that suggests that it is absolutely the right thing to do to frighten IT managers into sorting out their issues. They need shaking up say some. Especially analysts.
I helped develop the content of Andy's SNW presentation, working with his speech writers and graphic artists to make a consistent and coherent message fit in the 25 minutes he was given. The challenge with SNW is that we needed to make this presentation applicable across the entire storage industry, without sounding like an infomercial for IBM offerings.
Some people have compared the storage to the "insurance industry", claiming that backups, remote disk mirroring, continuous data protection and other storage related features are costs that can be compared to insurance you pay to protect your home, business, and other assets. You hope you never have to use it, and complain how much it costs, but when bad things happen, you hope it is the best money can buy.
Unlike Y2K, which was a one-time event that had a specific date of occurrence, the threats and risks mentioned by Andy in his presentation may never happen at all, or in other cases, may happen more than once, without knowing when or where. For the sake of your shareholders, and your stakeholders, it is best to be prepared for these possibilities.
The counter argument says that IT companies just smell the money.
Is this a counter argument? Can IBM not both help customers mitigate their risks, and at the same time, turn a profit? Trust me, you do not want to do business with any storage vendor that is not interested in making a profit. The better ones have incorporated addressing client's most pressing challenges into their strategy. I gave a quick summary of IBM's strategy last August in [Day 1 Storage Symposium].
Helping our clients mitigate risks is just one of IBM's core strengths. If you want to learn more, contact your local IBM Business Partner or storage rep.
Continuing this week's theme on Enterprise Applications, I thought that since I mentioned Lotus Notes in my discussion ofSAP yesterday, that I would cover Microsoft Exchange today.
IBM and Microsoft is the ultimate example of "Coopetition". Both companies develop popular operating systems. Microsoft's "Xbox 360" gaming console uses IBM processors. Microsoft Exchange and IBM Lotus Domino are the Coke-and-Pepsi dominant players in the email marketplace, with Microsoft slightly in the lead, as seen on this graph[Lotus Notes/Domino marketshare growing] from fellow IBM Lotus blogger Alan Lepofsky.And now, Microsoft is getting serious about participating in the storage software business, with its strong support for iSCSI and its SharePoint product. For this post, I will focus just on email.
For those not familiar with both Microsoft and IBM products, I offer the simple cheat-sheet below:
Microsoft Outlook (client)::IBM Lotus Notes (client) Microsoft Exchange (server)::IBM Lotus Domino (server)
Email has become the primary collaboration tool for most businesses, raising it to the level of "mission-critical".Microsoft has introduced its new Exchange 2007 to replace the existing Exchange 2003. Here are the key differences:
Windows 2000 or 2003
Runs on 32-bit x86
Requires 64-bit EM64T or AMD64, but Itanium IA64 not supported
Two(2) server roles
Five(5) server roles
Edge Server Role for combating SPAM
Unified Messaging services to combine voicemail, email, fax
5 storage groups
50 storage groups per server on Enterprise edition
50 databases per server on Enterprise edition (max 5 per storage group)
NAS or NTFS-formatted block disk
NTFS-formatted block disk recommended
Obviously, Exchange only runs on Windows operating system. The change from 32-bit to 64-bit means that many Exchange 2003 customers have not yet migrated over, and perhapsnow is a good time to point out alternative email servers on more reliable operating system platforms.For example, in addition to Windows 2003, Lotus Domino runs on IBM AIX, Linux on x86, Linux on System z, Sun Solaris, i5/OS on System i, and z/OS.
Another Linux alternative to Microsoft Exchange is Bynari InsightServer, which allows you to use your existing Windows-based Microsoft Outlook clients, swapping out only the server. This approach can be used when consolidating Windows servers to Linux virtual images on System z mainframe.Linux desktops can run [Ximian Evolution] to attach to either Bynari server, or Windows-based Microsoft Exchange server.Linux Journal offers a few articles on this:[Understanding and Replacing Microsoft Exchange, andExchange Functionality for Linux].
As with [Exchange 2003 editions], the new Exchange 2007 comes in both ["Standard" and "Enterprise" editions]. With all the newroles supported, you now can limit your "Mailbox Storage Server" role as Enterprise, and have the other roles, likeEdge and Hub, as simply "Standard" instead. Enterprise is about 5x more expensive than Standard, so that can makea difference.With Exchange 2003, the big difference was that "Standard" supported only 16GB, versus 16TB with "Enterprise",making "Standard" impractical for all but the smallest company. In the new Exchange 2007, both Standard and Enterprise support 16TB.
Exchange 2007 is also less IOPS-intensive. Thanks to 64-bit addressing, it generates about 75 percent fewer IOPS than Exchange 2003 for comparable configurations. This is good becauseaccording to a 2006 Radicati Group survey, the average corporate employee gets 84 emails per day, averaging 10MBdaily ingestion, and this is expected to grow to 15.8MB daily ingestion by 2008. The number of mailboxes worldwideis growing at a rate of 16 percent per year.
IBM System Storage is a Microsoft Gold certified partner, and participates in Microsoft's Exchange Solution Reviewed Program [ESRP].Both IBM DS8000 and DS4000 series are certified under this program, using a testbed called Jetstress.Those considering IBM System Storage N series can use Exchange 2007 with NTFS-formatted LUNs via FCP or iSCSIattachment.
Backup and Business Continuity
Back in 2003, the Meta Group found that 80 percent of organizations surveyed felt access to email was more importantthan telephone service, and that 74 percent believed being without email would present a greater hardship thanlosing telephone service. These percentages are probably higher today, with websiteslike ["Crackberry.com"] to cater to those addicted to theirRIM Blackberry hand-held devices.
IBM Tivoli Storage Manager can provide backup and recovery support for Microsoft Exchange.TSM for Mail supports both Microsoft Exchange and Lotus Domino. TSM for Copy Services can use MicrosoftVolume Shadow Copy Services (VSS) interfaces. I blogged about this before, back in June[Exchange 2003 VSS Snapshot Backup Whitepaper], and now there TSM has support for Exchange 2007 as well.
Interestingly, Exchange 2007 has some built-in"Business Continuity" features. Of the ones below, Standard edition has LCR only, Enterprise edition gives you the full set.
Local Continuous Replication (LCR):In this approach, a single server ships update logs from the active storage group on one disk system over to a passivecopy on a secondary disk system, presumably within 10km FCP distance. These logs can then be forward-applied to thepassive copy. This is sometimes called "database shadowing".
Cluster Continuous Replication (CCR):This is based on two servers in an active/passive MSCS cluster. First server is attached to the primary disk system,and ships logs to the passive copy attached to the second server.
Standby Continuous Replication (SCR):For the MSCS cluster-averse customer, SCR is based on two independent servers that are in two locations. In the event of failure on thefirst, scripts can be run to switch over to the second server. Each server has its own disk system.
Single Copy Clusters (SCC):This is for customers who have existing systems, but not recommended for new customers. An MSCS cluster, where both active andpassive servers are connected to the same single disk system. The disk array can be a single point of failure (SPOF) in this environment.You could mitigate risks by using IBM's disk mirroring in this situation, but then you are left coordinating those copies with new servers at the remote location.
It is estimated that as much as 75 percent of a company's intellectual property (IP) can be found somewhere in their email repository. Email is often requested in lawsuits and regulatory investigations. According to the Workplaceemail IM & blogging 2006 survey by AMA and the ePolicy Institute, 24 percent of organizations have be subpoenaed by courts and regulators, and another 15 percent have gone to court in lawsuits triggered by employee emails.
New regulations now mandate that emails are archived, protected against tampering and unauthorized access, and kept for a specific amount of time, or until certain conditions are met. According to a 2004 CSI and FBI Computer Crime and Security survey, 78 percent of organizations were hit by viruses (the rest must have been running Linux, AIX, i5/OS or z/OS!)and 37 percent reported unauthorized access to confidential information.
According to Gartner, over 60 million people will be doing some form of telecommuting, so access Microsoft hasbeen working on extending the reach of email beyond Outlook client. There is now "Outlook Web Access" thatprovides browser-based access, "Outlook Mobile" to provide text access from cellular phones, and even "Outlook Voice Access" which allows you to listen to your emails from any phone. These are all part of the new Unified MessagingServices feature.
Continuing my theme of "Innovation that matters", I thought I would cover MapQuest and NeverLost.
When Shawn Callahan on Anecdote wrote[Our need for the knowledge worker is over], he was referring to the fact that we no longer need the term "knowledge worker", because practically everyone isa "knowledge worker" today. He asks "How does knowledge help us to work better?"
It is said that as much as 30 percent of a knowledge worker's time is spent looking for information to do their jobs. This could be information to make a decision, decide between several choices, take specific action, or schedule when these actions should take place. The logistics of planning a business trip, and actually navigating in unfamiliarsurroundings, is a good example of this, and presents some unique challenges.
Before these technologies
Before these technologies, to plan a trip involved finding someone who lives or has been to the destination city,can recommend hotels and restaurants near the meeting facility, and can suggest approximate times it would take to drive from one place to another. I would bring a compass, and would shop for a city map, either before leaving, or upon arrival.
On one trip to Raleigh, I asked a local IBMer who lived in Raleigh for a hotel recommendation. The hotel was nice,but involved a long 45-60 minute commute each day to the meeting facility. When I asked her why she suggested thatparticular hotel, she said it was because it was "close to the airport". I have since learned never to ask for "best" of anything, as this is subject to such interpretation.
On another trip, I was travelling with a colleague in Germany. He asked how I knew which bus to take, and which bus stop to wait at. I pulled out my compass, and told him that based on the schedule, the bus that went in a specific directionmust be the correct one. The entire bus load of people burst out laughing, that we fit the universal stereotype ofmen who refuse to ask for directions. This method works only in Germany, where timeliness is next to godliness. In other countries, time schedules are more of a suggestion.
Sometimes, maps of the destination city were not always easy to find. Now with the Internet and Google Earth, maps are available before leaving on the trip. (See my post on Inner Workings of Storage which discusses how Google Earth works.)
I like using MapQuest, available online at [mapquest.com], and have not yet looked into the similar systems from Google or Yahoo. I map out each leg of my trip that involves driving, walking or trains. These are oftenairport-to-hotel, hotel-to-meeting, meeting-to-airport. Having a feel for the time and distances between locationshelps choose hotels and restaurants, when to leave, and so on.
I even use MapQuest in Tucson. Recently, a route I generated to visit a friend across town took into accountconstruction on Highway I-10 that has been going on for a while, where 8 miles of on-ramps are closed, and routed me around this mess accordingly. This is one key advantage over a static map, either a paper map, or downloaded from Google Earth.
While MapQuest may not always choose the "best" route, it always finds "a route" that works, and generally works for me.
A few problems with a MapQuest print-out I have found are:
It is on paper, which could impact driving, as I have to look away from the road to look at the instructions.
If it can't find a specific address, it provides generic instructions, and often, this involves airports.
It often starts with "Head Northeast...", so unless you brought your compass, or can tell what direction you are pointing from Sun, Moon or stars, you may end up leaving in the wrong direction.
Recently, I checkmarked the "Request NeverLost" box on my Hertz Gold profile, and now I seem to get NeverLost innearly every rental. The system is based on the[Global Positioning System] set of satellites,complemented by a CD-based street information and yellow pages data for US and Canada, stored in the trunk.
The NeverLost system knows which way the car is oriented, can tell which direction you are driving, and tell youwith voice prompts to be in the left lane, right lane, and when to make left and right turns. No need for a compassor any knowledge of which way is North, East, West or South.
I also like that it gives you three choices for route: (a) Shortest time, (b) Most use of Highways, and (c) Least use of Highways. This came in handy when I was in Toronto last week. Apparently, the 407 Highway had recently implementedan Electronic Toll Road (ETR) which bills based on license plate. While this system is fine for residents, it isnot designed for rental car companies. Hertz left a note in my car warning me NOT to use the 407 highway, or I wouldbe charged an $8.50 dollar penalty. I chose "Least use of Highways" and proceeded to tour the city of Toronto for90 minutes from the Pearson Airport to my hotel in Markham, a trip that would have only taken 20 minutes otherwise.
Once you enter your destination street address, it can estimate the distance to get there. This is not a quick process, as there is no keyboard, you have to enter each letter using up/down/left/right keys. You can enter thename of the street, hotel or restaurant. To find "Sal Grosso" restaurant in Smyrna, it was at 1927 Powers Ferry Road,but NeverLost said that Powers Ferry only went from 2750-6350. I had to select 2750 and then hope to be close enough.
In Dallas, I tried to find "P. F. Chang's" restaurant, and you have to make sure that the periods and spaces are entered exactly. I ended up looking for restaurants in Grapevine, Texas, and then just going through the list ofall that start with the letter "P".
Another issue is that sometimes it takes awhile to find the satelites in the sky. I get the car started, I hit theenter button to get the NeverLost started, enter the address, and then it starts looking for satellites? Why doesn'tit look for satellites while you spend 3-5 minutes trying to enter the street address?In my case, I take out my MapQuest print-out, head in the right direction, and hope that NeverLost catches upeventually, in time to help me get to the final location.
It is not clear how often Hertz updates the CDrom that contains the street and yellow pages data. About 30-40 percent of the time, it can't find the street address I am looking for, and I have to be creative on howto get me in the general area.
Part of the problems is that I have not read the entire instruction manual, and do not have time to learn itwhen I am in the car driving. I might have to put this on my reading to-do list before my next trip. Some ofmy other colleagues have purchased their own GPS-based systems, like those from Garmin or Magellan, so that theyalways have it available, and they always know how to use it. This has the advantage that you can use it when walking around, or in your own car when you are home, as well.
Despite these few problems, I am impressed on the innovations involved to make this all happen. All of the mapping information was stored, transmitted, searched, and then plotted in a manner that provides specificinformation that you need to get the job done. For now, I will probably use a combination of these to planand travel on my business trips. Wouldn't it be nice if other areas in your life had this kind of support?
For those in the US, last friday, the day after Thanksgiving, marks the official start of the Holiday shopping season. This has been called [Black Friday] as some stores open as early as 4am in the morning, when it is still dark outside, to offer special discount prices. Some shoppers camp out in sleeping bags and lawn chairs in front of stores overnight to be the first to get in.
Not surprisingly, some folks don't care for this approach to shopping, and prefer instead shopping online. Since 2005, the Monday after Thanksgiving (yesterday) has been called [Cyber Monday].USA Today newspaper reports [Cyber Monday really clicks with customers]. Many of the major online shopping websites indicated a 37 percent increase in sales yesterday over last year's Cyber Monday.
On Deadline dispels the hype on both counts:[Cyber Monday: Don't Believe the Hype?"], indicating that Black Friday is not the peak shopping for bricks-and-mortar shops, andthat Cyber Monday is not the busiest online shopping day of the year, either.
A flood of new video and other Web content could overwhelm the Internet by 2010 unless backbone providers invest up to US$137 billion in new capacity, more than double what service providers plan to invest, according to the study, by Nemertes Research Group, an independent analysis firm. In North America alone, backbone investments of $42 billion to $55 billion will be needed in the next three to five years to keep up with demand, Nemertes said.
Internet users will create 161 exabytes of new data this year, and this exaflood is a positive development for Internet users and businesses, IIA says.
If the "161 Exabytes" figure sounds familiar, it is probably from the IDC Whitepaper [The Expanding Digital Universe] that estimated the 161 Exabytes created, captured or replicated in 2006 will increase six-fold to 988 Exabytes by the year 2010. This is not just video captured for YouTube by internet users, but also corporate data captured by employees, and all of the many replicated copies. The IDC whitepaper was based on an earlier University of California Berkeley's often-cited 2003[How Much Info?] study, which not only looked at magnetic storage (disk and tape), but also optical, film, print, and transmissions over the air like TV and Radio.
A key difference was that while UC Berkeley focused on newly created information, the IDC study focused on digitized versions of this information, and included theadded impact of replication.It is not unusual for a large corporate databases to be replicated many times over. This is done for business continuity, disaster recovery, decision support systems, data mining, application testing, and IT administrator training. Companies often also make two or three copies of backups or archives on tape or optical media, to storethem in separate locations.
Likewise, it should be no surprise that internet companies maintain multiple copies of data to improve performance.How fast a search engine can deliver a list of matches can be a competitive advantage. Content providers may offer the same information translated into several languages.Many people replicate their personal and corporate email onto their local hard drives, to improve access performance, as well as to work offline.
The big question is whether we can assume that an increased amount of information created, captured and replicated will have a direct linear relation to the growth of what is transmitted over the internet. Three fourths of the U.S. internet users watched an average of 158 minutes of online video in May 2007, is this also expected to grow six-fold by 2010? That would be fifteen hours a month, at current video densities, or more likely it would be the same 158 minutes but of much higher quality video.
On the other hand, much of what is transmitted is never stored, or stored for only very short periods of time.Some of these transmissions are live broadcasts, you are either their to watch and listen to them when they happen, or you are not. Online video games are a good example. The internet can be used to allow multiple players to participate in real time, but much of this is never stored long-term. An interesting feature of the Xbox 360 is to allow you to replay "highlight" videos of the game just played, but I do not know if these can be stored away or transferred to longer term storage.
Of course, there will always be people who will save whatever they can get their hands on. Wired Magazine has anarticle [Downloading Is a Packrat's Dream], explaining that many [traditional packrats] are now also "digital packrats", and this might account for some of this growth. If you think you might be a digital packrat,Zen Habits offers a [3-step Cure].
In any case, the trends for both increased storage demand, and increased transmission bandwidth requirements, are definitely being felt. Hopefully, the infrastructure required will be there when needed.
It's official! My "blook" Inside System Storage - Volume I is now available.
This blog-based book, or “blook”, comprises the first twelve months of posts from this Inside System Storage blog,165 posts in all, from September 1, 2006 to August 31, 2007. Foreword by Jennifer Jones. 404 pages.
IT storage and storage networking concepts
IBM strategy, hardware, software and services
Disk systems, Tape systems, and storage networking
Storage and infrastructure management software
Second Life, Facebook, and other Web 2.0 platforms
IBM’s many alliances, partners and competitors
How IT storage impacts society and industry
You can choose between hardcover (with dust jacket) or paperback versions:
This is not the first time I've been published. I have authored articles for storage industry magazines, written large sections of IBM publications and manuals, submitted presentations and whitepapers to conference proceedings, and even had a short story published with illustrations by the famous cartoon writer[Ted Rall].
But I can say this is my first blook, and as far as I can tell, the first blook from IBM's many bloggers on DeveloperWorks, and the first blook about the IT storage industry.I got the idea when I saw [Lulu Publishing] run a "blook" contest. The Lulu Blooker Prize is the world's first literary prize devoted to "blooks"--books based on blogs or other websites, including webcomics. The [Lulu Blooker Blog] lists past year winners. Lulu is one of the new innovative "print-on-demand" publishers. Rather than printing hundredsor thousands of books in advance, as other publishers require, Lulu doesn't print them until you order them.
I considered cute titles like A Year of Living Dangerously, orAn Engineer in Marketing La-La land, or Around the World in 165 Posts, but settled on a title that matched closely the name of the blog.
In addition to my blog posts, I provide additional insights and behind-the-scenes commentary. If you go to the Luluwebsite above, you can preview an entire chapter in its entirety before purchase. I have added a hefty 56-page Glossary of Acronyms and Terms (GOAT) with over 900 storage-related terms defined, which also doubles as an index back to the post (or posts) that use or further explain each term.
So who might be interested in this blook?
Business Partners and Sales Reps looking to give a nice gift to their best clients and colleagues
Managers looking to reward early-tenure employees and retain the best talent
IT specialists and technicians wanting a marketing perspective of the storage industry
Mentors interested in providing motivation and encouragement to their proteges
Educators looking to provide books for their classroom or library collection
Authors looking to write a blook themselves, to see how to format and structure a finished product
Marketing personnel that want to better understand Web 2.0, Second Life and social networking
Analysts and journalists looking to understand how storage impacts the IT industry, and society overall
College graduates and others interested in a career as a storage administrator
And yes, according to Lulu, if you order soon, you can have it by December 25.
Are you covering the business impact of the internet failure across Asia, the Middle East and North Africa? The outage has brought business in those regions to a standstill. This disaster shines a direct spotlight on the vulnerability of technology and serves as a reminder of the ever increasing importance of protecting business critical information.
Disaster recovery needs to be a critical element of every technology plan. We don’t yet know the financial impact of this wide spread internet failure, but the companies with disaster recovery plans in place, were likely able to failover their entire systems to servers based in other regions of the world.
When I first heard of this outage, I am thinking, so a few million people don't have access to FaceBook and YouTube, what's the big deal? We in the U.S.A. are in the middle of a [Hollywood writer's strike] and don't have fresh new television sitcoms to watch! Yahoo News relays the typical government's response:[Egypt asks to stop film, MP3 downloads during Internet outage], presumably so that real business can take priority over what little bandwidth is still operational. Fellow IBM blogger "Turbo" Todd Watson pokes fun at this, in his post[Could Someone Please Get King Tutankhamun On The Phone?].Like us suffering here in America, perhaps our brothers and sisters in Egypt and India may getre-acquainted with the joys of reading books.
However, the [Internet Traffic Report-Asia] shows how this impacted various locations including: Shanghai, Mumbai, Tokyo, Tehran, and Singapore. In some cases, you have big delays in IP traffic, in other cases, complete packet loss, depending on where each country lies on the["axis of evil"].This is not something just affecting a few isolated areas, the impact is indeed worldwide. This would be a goodtime to talk about how computer signals are actually sent.
DWDM takes up to 80 independent signals, converts each to a different color of light, and sends all the colors down a single strand of glass fiber. At the receiving end, the colors are split off by a prism,and each color is converted back to its original electrical signal.
Similar DWDM, but only eight signals are sent over the glass fiber. This is generally cheaper, becauseyou don't need highly tuned lasers.
Wikipedia has a good article on [Submarine Communications Cable],including a discussion on how repairs are made when they get damaged or broken.It is important to remember that lost connectivity doesn't mean lost data, just lack of access to the data. Thedata is still there, you just can't get to it right now. For some businesses, that could be disruptive to actualoperations. In other cases, it means that backups or disk mirroring is suspended, so that you only have yourlocal copies of data until connectivity is resumed.
When two cables in the Mediterranean were severed last week, it was put down to a mishap with a stray anchor.
Now a third cable has been cut, this time near Dubai. That, along with new evidence that ships' anchors are not to blame, has sparked theories about more sinister forces that could be at work.
For all the power of modern computing and satellites, most of the world's communications still rely on submarine cables to cross oceans.
It gets weirder. In his blog Rough Type, Nick Carr's[Who Cut the Cables?] reportsnow a fourth cable has been cut, in a different location than the other two cable locations. If the people cuttingthe cables are looking to see how much impact this would have, they will probably be disappointed. Nick Carrrelates how resilient the whole infrastructure turned out to be:
Though India initially lost as much as half of its Internet capacity on Wednesday, traffic was quickly rerouted and by the weekend the country was reported to have regained 90% of its usual capacity. The outage also reveals that the effects of such outages are anything but neutral; they vary widely depending on the size and resources of the user.
Outsourcing firms, such as Infosys and Wipro, and US companies with significant back-office and research and development operations in India, such as IBM and Intel, said they were still trying to asses how their operations had been impacted, if at all.
Whether it is man-made or natural disaster, every business should have a business continuity plan. If you don't have one, or haven't evaluated it in a while, perhaps now is a good time to do that. IBM can help.
Many people have asked me if there was any logic with the IBM naming convention of IBM Systems branded servers. Here's your quick and easy cheat sheet:
System x -- "x" for cross-platform architecture. Technologies from our mainframe and UNIX servers were brought into chips that sit next to the Intel or AMD processors to provide a more reliable x86 server experience. For example, some models have a POWER processor-based Remote Supervisor Adapter (RSA).
System p -- "p" for POWER architecture.
System z -- "z" for Zero-downtime, zero-exposures. Our lawyers prefer "near-zero", but this is about as close as you get to ["six-nines" availability] in our industry, with the highest level of security and encryption, no other vendor comes close, so you get the idea.
But what about the "i" for System i? Officially, it stands for "Integrated" in that it could integrate different applications running on different operating systems onto a [COMMON] platform. Options were available to insert Intel-based processor cards that ran Windows, or attach special cables that allowed separate System x servers running Windows to attach to a System i. Both allowed Windows applications to share the internal LAN and SAN inside the System i machine. Later, IBM allowed [AIX on System i] and [Linux on Power] operating systems to run as well.
From a storage perspective, we often joked that the "i" stood for "island", as most System i machines used internal disk, or attached externally to only a fewselected models of disk from IBM and EMC that had special support for i5/OS using a special, non-standard 520-byte disk block size. This meant only our popular IBM System Storage DS6000 and DS8000 series disk systems were available. This block size requirement only applies to disk. For tape, i5/OS supports both IBM TS1120 and LTO tape systems. For the most part,System i machines stood separate from the mainframe, and the rest of the Linux, UNIX and Windows distributed serverson the data center floor.
Often, when I am talking to customers, they ask when will product xyz be supported on System z or System i?I explained that IBM's strategy is not to make all storage devices connect via ESCON/FICON or support non-standard block sizes, but rather to get the servers to use standard 512-byte block size, Fibre Channel and other standard protocols.(The old adage applies: If you can't get Mohamed to move to the mountain, get the mountain to move to Mohamed).
On the System z mainframe, we are 60 percent there, allowing three of the five operating systems (z/VM, z/VSE and Linux) to access FCP-based disk and tape devices. (Four out of six if you include [OpenSolaris for the mainframe])But what about System i? As the characters on the popular television show [LOST] would say: It's time to get off the island!
Last week, IBM announced the new [i5/OS V6R1 operating system] with features that will greatly improve the use of external storage on this platform. Check this out:
POWER6-based System i 570 model server
Our latest, most powerful POWER processor brought to the System i platform. The 570 model will be the first in the System i family of servers to make use of new processing technology, using up to 16 (sixteen!) POWER6 processors (running at 4.7GHZ) in each machine.The advantage of the new processors is the increased commercial processing workload (CPW) rating, 31 percent greater than the POWER5+ version and 72 percent greater than the POWER5 version. CPW is the "MIPS" or "TeraFlops" rating for comparing System i servers.Here is the[Announcement Letter].
Fibre Channel Adapter for System i hardware
That's right, these are [Smart IOAs], so an I/O Processor (IOP) is no longer required! You can even boot the Initial Program Load (IPL) direclty from SAN-attached tape.This brings System i to the 21st century for Business Continuity options.
Virtual I/O Server (VIOS)
[VirtualI/O Server] has been around for System p machines, but now available on System i as well. This allows multiplelogical partitions (LPARs) to access resources like Ethernet cards and FCP host bus adapters. In the case of storage, the VIOS handles the 520-byte to 512-byte conversion, so that i5/OS systems can now read and write to standard FCP devices like the IBM System Storage DS4800 and DS4700 disk systems.
IBM System Storage DS4000 series
Initially, we have certified DS4700 and DS4800 disk systems to work with i5/OS, but more devices are in plan.This means that you can now share your DS4700 between i5/OS and your other Linux, UNIX and Windowsservers, take advantage of a mix of FC and SATA disk capacities, RAID6 protection, and so on.
To call [IBM PowerVM] the "VMware for the POWER architecture" would not do it quite justice. In combination with VIOS, IBM PowerVM is able to run a variety of AIX, Linux and i5/OS guest images.The "Live Partition Mobility" feature allows you to easily move guest images from one system to another, while they are running, just like VMotion for x86 machines.
And while we are on the topic of x86, PowerVM is also able to represent a Linux-x86 emulation base to run x86-compiled applications. While many Linux applications could be re-complied from source code for the POWER architecture "as is", others required perhaps 1-2 percent modification to port them over, and that was too much for some software development houses. Now, we can run most x86-compiled Linux application binaries in their original form on POWER architecture servers.
BladeCenter JS22 Express
The POWER6-based [JS22 Express blade] can run i5/OS, taking advantage of PowerVM and VIOS to access all of the BladeCenterresources. The BladeCenter lets you mix and match POWER and x86-based blades in the same chassis, providing theultimate in flexibility.
Rich Bourdeau has written a nice article on InfoStor titled [Software as a Service (SaaS) meets Storage]. Last year, IBM acquired Arsenal Digital, and he mentions both in this article.It is interesting how this has evolved over the years.
Rent warehouse space for tapes
I remember when various companies offered remote storage for tapes. These would be temperature and humidity-controlledrooms, with access lists on who could bring tapes in, who could take tapes out, and so on. In the event of thedisaster, someone would collect the appropriate tapes and take them to a recovery site location.
Rent online/nearline storage from a Storage Service Provider (SSP)
SSPs rented storage space on disk, or provided automated tape libraries that could be written to. With tapes being ejected and stored in temperature/humidity-controlled vaults. Electronic vaulting eliminates a lot of theissues with cartridge handling and transportation, is more secure, and faster. Rented disk space, based on a Gigabytes-per-month rate, could be used for whatever the customer wanted. If these were for backups or archive,then the customer has to have their own software, to do their own processing at their own location, sending the data to the remote storage as appropriate, and manage their own administration.
Backup-as-a-Service and Archive-as-a-Service
We are now seeing the SaaS model applied to mundane and routine storage management tasks. New providers can offerthe software to send backups, the disk to write them to, and as needed the tape libraries and cartridges to rollover when the disk space is full. Disk capacity can be sized so that the most recent backups are on immediately accessible for fast recovery.
The same concept can be applied to archives. The key difference between a backup and an archive is that backups areversion-based. You might keep three versions of a backup, the most recent, and two older copies, in case something is wrong with the most recent copy, you can go back to older copies. This could be from undetected corruption of the data itself, or problems with the disk or tape media. An archive, on the other hand, is time-based. You want this data to be kept for a specific period of time, based on an event or fixed period of years.
Since BaaS and AaaS providers know what the data is, have some idea of the policies and usage patterns will be, can then optimize a storage solution that best meets service level agreements.
On Tuesday, I covered much of the Feb 26 announcements, but left the IBM System Storage DS8000 for today so that it can haveits own special focus.
Many of the enhancements relate to z/OS Global Mirror, which we formerly called eXtended Remote Copy or "XRC", not to be confused with our "regular" Global Mirror that applies to all data. For those not familiar with z/OS Global Mirror, here is how it works. The production mainframe writes updates to the DS8000, and the DS8000 keeps track of these in cache until a "reader" can pull them over to the secondary location.The "reader" is called System Data Mover (SDM) which runs in its own address space under z/OS operating system. Thanks to some work my team did several years ago, z/OS Global Mirror was able to extend beyond z/OS volumes and include Linux on System z data. Linux on System z can use a "Compatible Disk Layout" (CDL) format (now the default) that meetsall the requirements to be included in the copy session.
IBM has over 300 deployments of z/OS Global Mirror, mostly banks, brokerages and insurance companies. The feature can keep tens of thousands of volumes in one big "consistency group" and asynchronously mirror them to any distance on the planet, with the secondary copy recovery point objective (RPO) only a few seconds behind the primary.
Extended Distance FICON
Extended Distance FICON is an enhancement to the industry-standard FICON architecture (FC-SB-3) that can help avoid degradation of performance at extended distances by implementing a new protocol for "persistent" Information Unit (IU) pacing. This deals with the number of packets in flight between servers and storage separated by long distances, andcan keep a link fully utilized at 4Gpbs FICON up to 50 kilometers. This is particularly important for z/OS GlobalMirror "reader" System Data Mover (SDM). By having many "reads" in flight, this enhancementcan help reduce the need for spoofing or channel-extender equipment, or allow you to choose lower-costchannel extenders based on "frame-forwarding" technology. All of this helps reduce your total cost of ownership (TCO)for a complete end-to-end solution.
This feature will be available in March as a no-charge update to the DS8000 microcode.For more details, see the [IBM Press Release]
z/OS Global Mirror process offload to zIIP processors
To understand this one, you need to understand the different "specialty engines" available on the System z.
On distributed systems where you run a single application on a single piece of server hardware, you mightpay "per server", "per processor" or lately "per core" for dual-core and quad-core processors. Software vendors were looking for a way to charge smaller companies less, and larger companies more. However, you might end up paying the same whether you use 1GHz Intelor 4GHz Intel processor, even though the latter can do four times more work per unit time.
The mainframe has a few processors for hundreds or thousands of business applications.In the beginning, all engines on a mainframe were general-purpose "Central Processor" or CP engines. Based on theircycle rate, IBM was able to publish the number of Million Instructions per Second (MIPS) that a machine witha given number of CP engines can do. With the introduction of side co-processors, this was changed to "Millionsof Service Units" or MSU. Software licensing can charge per MSU, and this allows applications running in aslittle as one percent of a processor to get appropriately charged.
One of the first specialty engines was the IFL, the "Integrated Facility for Linux". This was a CP designatedto only run z/VM and Linux on the mainframe. You could "buy" an IFL on your mainframe much cheaper than a CP,and none of your z/OS application software would count it in the MSU calculations because z/OS can't run on theIFL. This made it very practical to run new Linux workloads.
In 2004, IBM introduced "z Application Assist Processor" (zAAP) engines to run Java, and in 2006, the "z Integrated Information Processor" (zIIP) engines to run database and background data movement activities.By not having these counted in the MSU number for business applications, it greatly reduced the cost for mainframe software.
Tuesday's announcement is that the SDM "reader" will now run in a zIIP engine, reducing the costs for applicationsthat run on that machine. Note that the CP, IFL, zAAP and zIIP engines are all identical cores. The z10 EC hasup to 64 of these (16 quad-core) and you can designate any core as any of these engine types.
Faster z/OS Global Mirror Incremental Resync
One way to set up a 3-site disaster recovery protection is to have your production synchronously mirrored to a second site nearby, and at the same time asynchronously mirrored to a remote location. On the System z,you can have site "A" using synchronous IBM System Storage Metro Mirror over to nearby site "B", and alsohave site "A" sending data over to size "C" using z/OS Global Mirror. This is called "Metro z/OS Global Mirror"or "MzGM" for short.
In the past, if the disk in site A failed, you would switch over to site B, and then send all the data all over again. This is because site B was not tracking what the SDM reader had or had not yet processed.With Tuesday's announcement, IBM has developed an "incremental resync" where site B figures out what theincremental delta is to connect to the z/OS Global Mirror at site "C", and this is 95% faster than sendingall the data over.
IBM Basic HyperSwap for z/OS
What if you are sending all of your data from one location to another, and one disk system fails? Do you declare a disaster and switch over entirely? With HyperSwap, you only switch over the disk systems, but leave therest of the servers alone. In the past, this involved hiring IBM Global Technology Services to implementa Geographically Dispersed Parallel Sysplex (GDPS) with software that monitors the situation and updates thez/OS operating system when a HyperSwap had occurred. All application I/O that were writing to the primary locationare automatically re-routed to the disks at the secondary location. HyperSwap can do this for all the disk systems involved,allowing applications at the primary location to continue running uninterrupted.
HyperSwap is a very popular feature, but not everyone has implemented the advanced GDPS capabilities.To address this, IBM now offers "Basic HyperSwap", which is actually going to be shipped as IBMTotalStorage Productivity Center for Replication Basic Edition for System z. This will run in a z/OSaddress space, and use either the DB2 RDBMS you already have, or provide you Apache Derby database for thosefew out there who don't have DB2 on their mainframe already.
Update: There has been some confusion on this last point, so let me explain the keydifferences between the different levels of service:
Basic HyperSwap: single-site high availability for the disk systems only
GDPS/PPRC HyperSwap Manager: single- or multi-site high availability for the disk systems, plus some entry-level disaster recovery capability
GDPS/PPRC: highly automated end-to-end disaster recovery solution for servers, storage and networks
I apologize to all my colleagues who thought I implied that Basic HyperSwap was a full replacement for the morefull-function GDPS service offerings.
Extended Address Volumes (EAV)
Up until now, the largest volume you could have was only 54 GB in size, and many customers still are using 3 GB and 9 GB volume sizes. Now, IBM will introduce 223 GB volumes. You can have any kind of data set on these volumes,but only VSAM data sets can reside on cylinders beyond the first 65,280. That is because many applications still thinkthat 65,280 is the largest cylinder number you can have.
This is important because a mainframe, or a set of mainframes clustered together, can only have about 60,000disk volumes total. The 60,000 is actually the Unit Control Block (UCB) limit, and besides disk volumes, youcan have "virtual" PAVs that serve as an alias to existing volumes to provide concurrent access.
Aside from the first item, the Extended Distance FICON, the other enhancements are "preview announcements" which means that IBM has not yet worked out the final details of price, packaging or delivery date. In many cases, the work is done, has been tested in our labs, or running beta in select client locations, but for completeness I am required to make the following disclaimer:
All statements regarding IBM's plans, directions, and intent are subject to change or withdrawal without notice. Availability, prices, ordering information, and terms and conditions will be provided when the product is announced for general availability.
I am always amused in the manner the IT industry tries to solve problems. Take, for example, theprocess of backups. The simplest approach is to backup everything, and keep "n" versions of that.Simple enough for a small customer who has only a handful of machines, but does not scale well. Inmy post [Times a Million],I coined the phrase "laptop mentality", referring to people's inability to think through solutions in large scale.
Apparently, I am not alone.Steve Duplessie (ESG) wrote in his post[Random Thoughts]:
"I may even get to stop yelling at people to stop doing full backups every week on non-changing data (which is 80 %+) just because that's how they used to do it. They won't have a choice. You can't back up 5X your current data the way you do (or don't) today."
Hu Yoshida (HDS) does a great job explaining that thereare three ways to perform deduplication for backups:
Pre-processing. Have the backup software not backup unchanged data.
Inline processing. Have an index to filter the output of the backup as it sends data to storage.
Post-processing. Have the receiving storage detect duplicates and handle them accordingly.
"A full backup of 1TB data base tablespace is taken on day one. The next day another full backup is taken and only 2GB of that backup has any changes.
Using traditional full backup approaches after 2 nights, the backup capacity required is 2 x 1TB = 2TB
One method of calculating de-duplication ratios could yield a low ratio:
Total de-duplicated backup capacity used = 1TB + 2GB = 1.002TB
If the de-duplication ratio compares the amount of total physical storage used to the total amount that would have been used by traditional backup methods, the ratio = 2TB / 1.002TB = approximately 2:1
Another method of calculating de-duplication ratios could yield a high ratio:
Total de-duplicated backup capacity used still = 1.002TB
If the de-duplication ratio compares the amount of data stored in the most recent (second) backup to the amount that would have been used by traditional backup methods, the ratio 1TB / 2GB = 1000GB / 2GB = 500:1"
While IBM also offers deduplication in the IBM System Storage N series disk systems, I find that for backup, itis often more effective to apply best practices via IBM Tivoli Storage Manager (TSM). Let's take a look at some:
Exclude Operating System files
Why take full backups of your operating system every day? Yes, deduplication will find a lot to reduce fromthis, but best practices would exclude these. TSM has an include/exclude list, and the default version excludesall the operating system files that would be recovered from "bare machine recovery" or "new system install"procedures. Often, if the replacement machine has different gear inside, your OS backups aren't what you need,and a fresh OS install may determine this and install different drivers or different settings.
Exclude Application programs
Again, yes if there are several machines running the same application, you probably have opportunity for deduplication. However, unless you match these up with the appropriate registry or settings buried down in theoperating system, recovering just application program files may render an unusable system. Applications are bestinstalled from a common source that are either "pushed" through software distribution, or "pulled" from an application installation space.
If you have TB-sized databases, and are only doing full backups daily to protect it, have I got a solution for you.IBM and others have software that are "application-aware" and "database-aware" enough to determine what haschanged since the last backup and copy only that delta. Taking advantage of the TSM Application ProgrammingInterface (API) allows for both IBM and third party tools to take these delta backups correctly.
Which leaves us with user files, which are often unique enough on their own from the files of other users,that would not benefit from file-level deduplication. Backing up changed data only, as TSM does with its patented ["progressive incremental backup"] method, generally gets most of the benefits described by deduplication, without having to purchase storage hardware features.
Of course, if two or more users have identical files, the question might be why these are not stored on acommon file share. NAS file share repositories can greatly reduce each user keeping their own set of duplicates.It is interesting that some block-oriented deduplication,such as that found in the IBM System Storage N series, can get some benefit because some user files are oftenderivatives of other files, and there might be some 4 KB blocks of data in common.
Last November, I visited a customer in Canada. All of their problems were a direct result of taking full backupsevery weekend. It put a strain on their network; it used up too many disk and tape resources; and it took too long tocomplete. They asked about virtual tape libraries, deduplication, and anything else that could help them. The answer was simple: switch to IBM Tivoli Storage Manager and apply best practices.
In explaining the word "archive" we came up with two separate Japanese words. One was "katazukeru", and the other was "shimau". If you are clearing the dinner plates from the table after your meal, for example, it could be done for two reasons. Both words mean "to put away", but the motivation that drives this activity changes the word usage. The first reason, katazukeru, is because the table is important, you need the table to be empty or less cluttered to use it for something else, perhaps play some card game, work on arts and craft, or pay your bills. The second reason, shimau, is because the plates are important, perhaps they are your best tableware, used only for holidays or special occasions only, and you don't want to risk having them broken. As it turns out, IBM supports both senses of the word archive. We offer "space management" when the space on the table, (or disk or database), is more important, so older low-access data can be moved off to less expensive disk or tape. We also offer "data retention" where the data itself is valuable, and must be kept on WORM or non-erasable, non-rewriteable storage to meet business or government regulatory compliance.
The process of archiving your data from primary disk to alternate storage media can satisfy both motivations.
IBM offers software specifically to help with this archival process.For email archive, IBM offers [IBM CommonStore] for Lotus Domino and MicrosoftExchange. For database archive, including support for various ERP and CRM applications, IBM offers [IBM Optim] from the acquisition of Princeton Softech.
The problems occur when companies, under the excuse of simplification or consolidation, feel they can just usetheir backups as archives. They are taking daily backups of their email repositories and databases, and keepingthese for seven to ten years. But what happens when their legal e-discovery team needs to find all emails or database records related to a particular situation, an employee, client or account? Good luck! Most backupsare not indexed for this purpose, so storage admins are stuck restoring many different backups to temporary storage and combing through the files in hopes to find the right data.
Backups are intended for operational recovery of data that is lost or corrupted as a result of hardware failures, application defects, or human error. Disk mirroring or remote replication might help with hardware failures, but any logical deletion or corruption of data is immediately duplicated, so it is not a complete solution. FlashCopy or Snapshot point-in-time copies are useful to go back a short time to recover from logical failures, but since they are usually on the same hardware as the original copies, may not protect against hardware failures. And then there's tape, and while many people malign tape as a backup storage choice, 71 percent of customers send backups to tape, according to a 2007 Forrester Research report.
Backups often aren't viable unless restored to the same hardware platform, with the same operating system and application software to make sense of the ones and zeros. For this reason, people typically only keep two to five backup versions, for no more than 30 days, to support operational recovery scenarios. If you make updatesto your hardware, OS or application software, be sure to remember to take fresh new backups, as the old backupsmay no longer apply.
Archives are different. Often, these are copies that have been "hardened" or "fossilized" so that they make sense even if the original hardware, OS or application software is unavailable. They might be indexed so that they can be searched, so that you only have to retrieve exactly the data you are looking for. Finally, they are often stored with "rendering tools" that are able to display the data using your standard web browser, eliminating the need to have a fully working application environment.
Take any backup you might have from five years ago and try to retrieve the information. Can you do it? This might be a real eye-opener. You might have inherited this backup-as-also-archive approach from someone else, and are trying to figure out what to do differently that makes more sense. Call IBM, we can help.
He feels I was unfair to accuse EMC of "proprietary interfaces" without spelling out what I was referring to. Here arejust two, along with the whines we hear from customers that relate to them.
EMC Powerpath multipathing driver
Typical whine: "I just paid a gazillion dollars to renew my annual EMC Powerpath license, so you will have to come back in 12 months with your SVC proposal. I just can't see explaining to my boss that an SVC eliminates the need for EMC Powerpath, throwing away all the good money we just spent on it, or to explain that EMC chooses not to support SVC as one of Powerpath's many supported devices."
EMC SRDF command line interface
Typical whine: "My storage admins have written tons of scripts that all invoke EMC SRDF command line interfacesto manage my disk mirroring environment, and I would hate for them to re-write this to use IBM's (also proprietary) command line interfaces instead."
Certainly BarryB is correct that IBM still has a few remaining "proprietary" items of its own. IBM has been in business over 80 years, but it was only the last 10-15 years that IBM made a strategic shift away from proprietary and over to open standards and interfaces. The transformation to "openness" is not yet complete, but we have made great progress. Take these examples:
The System z mainframe - IBM had opened the interfaces so that both Amdahl and Fujitsu made compatible machines.Unlike Apple which forbids cloning of this nature, IBM is now the single source for mainframes because the other twocompetitors could not keep up with IBM's progress and advancements in technology.
Update: Due to legal reasons, the statements referring to Hercules and other S/390 emulators havebeen removed.
The z/OS operating system - While it is possible to run Linux on the mainframe, most people associate the z/OSoperating system with the mainframe. This was opened up with UNIX System Services to satisfy requests from variousgovernments. It is now a full-fledged UNIX operating system, recognized by the [Open Group] that certifies it as such.
As BarryB alludes, the unique interfaces for disk attachment to System z known as Count-Key-Data (CKD) was published so that both EMC and HDS can offer disk systems to compete with IBM's high-end disk offerings. Linux on System zsupports standard Fibre Channel, allowing you to attach an IBM SVC and anyone's storage. Both z/OS and Linux on System z support NAS storage, so IBM N series, NetApp, even EMC Celerra could be used in that case.
The System i itself is still proprietary, but recently IBM announced that it will now support standard block size (512 bytes) instead of the awkward 528 byte blocks that only IBM and EMC support today. That means that any storage vendor will be ableto sell disk to the System i environment.
Advanced copy services, like FlashCopy and Metro Mirror, are as proprietary as the similar offerings from EMCand HDS, with the exception that IBM has licensed them to both EMC and HDS. Thanks to cross-licensing, you can do [FlashCopy on EMC] equipment. Getting all the storage vendors to agree to open standards for these copy services is still workin progress under [SNIA], but at least people who have coded z/OS JCL batchjobs that invoke FlashCopy utilities can work the same between IBM and EMC equipment.
So for those out there who thought that my comment about EMC's proprietary interfaces in any way implied thatIBM did not have any of its own, the proverbial ["pot calling the kettle black"] so to speak, I apologize.
BarryB shows off his [PhotoShop skills] with the graphic below. I take it as a compliment to be compared to anAll-American icon of business success.
TonyP and Monopoly's Mr. Pennybags Separated at Birth?
However, BarryB meant it as a reference back to long time ago when IBMwas a monopoly of the IT industry, which according to [IBM's History], ended in 1973. In other words, IBMstopped being a monopoly before EMC ever existed as a company, and long before I started working for IBM myself.
The anti-trust lawsuit that BarryB mentions happened in 1969, which forced IBM to separate some of the software from its hardware offerings, and prevented IBM from making various acquisitions for years to follow, forcing IBM instead into technology partnerships. I'm glad that's all behind us now!
My session was the first in the morning, at 8:30am, but managed to pack the room full of people. A few looklike they just rolled in from Brocade's special get-together in Casey's Irish Pub the night before.I presented how IBM's storage strategy for the information infrastructure fits into the greater corporate-wide themes.To liven things up, I gave out copies of my book[Inside System Storage: Volume I] to those who asked or answered the toughest questions.
Data Deduplication and IBM Tivoli Storage Manager (TSM)
IBM Toby Marek compared and contrasted the various data deduplication technologies and products available, andhow to deploy them as the repository for TSM workloads. She is a software engineer for our TSM software product,and gave a fair comparison between IBM System Storage N series Advanced Single Instance Storage (A-SIS), IBMDiligent, and other solutions out in the marketplace.If you are going to combine technologies, then it isbest to dedupe first, then compress, and finally encrypt the data. She also explained about the many cleverways that TSM does data reduction at the client side greatly reduces the bandwidth traffic over the LAN,as well as reducing disk and tape resources for storage. This includes progressive "incremental forever" backup for file selection, incremental backups for databases, and adaptive sub-file backup.Because of these data reduction techniques, you may not get as much benefit as deduplication vendors claim.
The Business Value of Energy Efficiency Data Centers
Scott Barielle did a great job presenting the issues related to the Green IT data center. He is part of IBM"STG Lab Services" team that does energy efficiency studies for customers. It is not unusual for his teamto find potential savings of up to 80 percent of the Watts consumed in a client's data center.
IBM has done a lot to make its products more energy efficient. For example, in the United States, most datacenters are supplied three-phase 480V AC current, but this is often stepped down to 208V or 110V with powerdistribution units (PDUs). IBM's equipment allows for direct connection to this 480V, eliminating the step-downloss. This is available for the IBM System z mainframe, the IBM System Storage DS8000disk system, and larger full-frame models of our POWER-based servers, and will probably be rolled out to someof our other offerings later this year. The end result saves 8 to 14 percent in energy costs.
Scott had some interesting statistics. Typical US data centers only spend about 9 percent of their IT budgeton power and cooling costs. The majority of clients that engage IBM for an energy efficiency study are not tryingto reduce their operational expenditures (OPEX), but have run out, or close to running out, of total kW ratingof their current facility, and have been turned down by their upper management to spend the average $20 million USDneeded to build a new one. The cost of electricity in the USA has risen very slowly over the past 35 years, andis more tied the to fluctuations of Natural Gas than it is to Oil prices.(a recent article in the Dallas News confirmed this:["As electricity rates go up, natural gas' high prices, deregulation blamed"])
Cognos v8 - Delivering Operational Business Intelligence (BI) on Mainframe
Mike Biere, author of the book [BusinessIntelligence for the Enterprise], presented Cognos v8 and how it is being deployed for the IBMSystem z mainframe. Typically, customers do their BI processing on distributed systems, but 70 percent of the world's business data is on mainframes, so it makes sense to do yourBI there as well. Cognos v8 runs on Linux for System z, connecting to z/OS via [Hypersockets].
There are a variety of other BI applications on the mainframe already, including DataQuant,AlphaBlox, IBI WebFocus and SAS Enterprise Business Intelligence. In addition to accessing traditional onlinetransaction processing (OLTP) repositories like DB2, IMS and VSAM, using the [IBM WebSphere ClassicFederation Server], Cognos v8 can also read Lotus databases.
Business Intelligence is traditionally query, reporting and online analytics process (OLAP) for the top 10 to 15 percent of the company, mostly executives andanalysts, for activities like business planning, budgeting and forecasting. Cognos PowerPlay stores numericaldata in an [OLAP cube] for faster processing.OLAP cubes are typically constructed with a batch cycle, using either "Extract, Transfer, Load" [ETL], or "Change Data Capture" [CDC], which playsto the strength of IBM System z mainframe batch processing capabilities.If you are not familiar with OLAP, Nigel Pendse has an article[What is OLAP?] for background information.
Over the past five years, BI is now being more andmore deployed for the rest of the company, knowledge workers tasked with doing day-to-day operations. Thisphenomenom is being called "Operational" Business Intelligence.
IBM Glen Corneau, who is on the Advanced Technical Support team for AIX and System p, presented the IBMGeneral Parellel File System (GPFS), which is available for AIX, Linux-x86 and Linux on POWER.Unfortunately, many of the questions were related to Scale Out File Services (SOFS), which my colleague GlennHechler was presenting in another room during this same time slot.
GPFS is now in its 11th release since its introducing in 1997. All of the IBM supercomputers on the [Top 500 list] use GPFS. The largest deployment of GPFS is 2241 nodes.A GPFS environment can support up to 256 file systems, each file system can have up to 2 billion filesacross 2 PB of storage. GPFS supports "Direct I/O" making it a great candidate for Oracle RAC deployments.Oracle 10g automatically detects if it is using GPFS, and sets the appropriate DIO bits in the stream totake advantage of GPFS features.
Glen also covered the many new features of GPFS, such as the ability to place data on different tiers ofstorage, with policies to move to lower tiers of storage, or delete after a certain time period, all conceptswe call Information Lifecycle Management. GPFS also supports access across multiple locations and offersa variety of choices for disaster recovery (DR) data replication.
Perhaps the only problem with conferences like this is that it can be an overwhelming["fire hose"] of information!
I attended the main tent sessions on Day 2 (Monday). The focuswas on Visibility, Control and Automation.
Steve is IBM senior VP and Group Executive of the IBM Software Group, and presented someinsightful statistics from the IBM Global Technology Outlookstudy, some recent IBM wins, and other nuggets of IT trivia:
In 2001, there were about 60 million transistors per humanbeing. By 2010, this is estimated to increase to one billion per human
In 2005, there were about 1.3 billion RFID tags, by 2010this is estimated to grow to over 30 billion
IBM helped the City of Stockholm, Sweden, reduce traffic congestion 20-25% using computer technology
Only about 25% data is original, the remaining75% is replicated
In 2007, there were approximately 281 Exabytes (EB), expected to increase to 1800 EB by the year 2011
70 percent of unstructured data is user-created content, but 85 percent of this will be managed by enterprises
Only 20% of data is subject to compliance rules and standards, and about 30% subject to security applications
Human error is the primary reason for breaches, with34% of organizations experiencing a major breach in 2006
10% of IT budget is energy costs (power and cooling), and thiscould rise to 50% in the next decade
30 to 60 percent of energy is wasted. During the next 5 years, people will spend as much on energy as they will on new hardware purchases.
Al Zollar is the General Manager of IBM Tivoli. He discussedthe 20 some recent software acquisitions, including Encentuate and FilesX earlier this year.
"The time has come to fully industrialize operations" -- Al Zollar
What did Al mean about "industrizalize"? This is theclosed-loop approach of continuous improvement, including design, delivery and management.
Al used several examples from other industries:
Henry Ford used standardized parts and processautomation. Assembly of an automatobile went from 12 hours by master craftsmen, to delivering a new model T every 23 seconds off anassembly line.
Power generation was developed by Thomas Edison. A satellite picture showed the extent of the [Blackout of 2003 in Northeast US and Canada]. The time for "smart grid" has arrived, making sensors andmeters more intelligent. This allows non-essential IP-enabled appliances in our home or office to be turned off to reduce energy consumption.
[McCarran International Airport] integrated the management of 13,000 assets with IBM Tivoli Maximo Enterprise Asset Management (EAM) software, and was able to increase revenues through more accurate charge-back. Unlike traditional EnterpriseResource Planning (ERP) applications, EAM offers the deep management of four areas: production equipment, facilities, transportation, and IT.
When compared to these other industries, management of IT is in itsinfancy. The expansion of [Web 2.0] and Service-Oriented Architecture [SOA] is driving this need.What people need is a "new enterprise data center" that IBM Tivoli software can help you manage across operational boundaries. IBM can integrate through open standards with management software from Cisco, Sun, OracleMicrosoft, CA, HP, BMC Software, Alcatel Lucent, and SAP.Together with our ecosystems of technology partners, IBM ismeeting these challenges.
IBM clients have achieved return on investment from gettingbetter control of their environment. This week there are client experience presentations Sandia National Labs, Spirit AeroSystems, Bank of America, and BT Converged communication services.
Chris O'Connor used some of his staff as "actors" to show an incredible live demo of various Tivoli and Maximo products for the mythical launch of "Project Vitalize", thenew online web store for a new "Aero Z bike" from the mythical VCA Bike and Motorcycle company.
Shoel Perelman played the role of "CIO".The CIO locked down all spending, and asked the IT staff to make the shift from bricks-and-mortar to web salesof this new product on in 15 months. While the company andsituation were mythical, all the products that were part of thelive demo are all readily available.The CIO had three goals:
What do we have? where is it? what's connected to what?Traditionally, these would be answered from lists in spreadsheets.The CIO had a goal to deploy IBM Tivoli Application DependenceDiscover Manager (TADDM) which discovered all hardware and software,with an easy to understand view, and how each piece serves the business applications.
Each of the teams have processes, and needed them consistent andrepeatable, tightly linked together. Time is often wasted on thephone coordinating IT changes. For this, the CIO had a goalto deploy Tivoli Change and Configuration Management Database (CCMDB) for "strict change control".The process dashboard is accessible for all teams, to see how all projects are progressing. There is also aCompliance dashboard, which identifies all changes by role, clearly spelling out who can do what.
There is a lot of computerized machinery, Manufacturing assets and robotics. The CIO set a goal to "do more with existing people", and needed to automate key processes.Sales rep wanted to add a new distributor to key web portal.This was all done through their "service catalog", When they needed to deploy a new application, they were able to find servers with available capacity and adjust using automatic provisioning. Thanks to IBM, the IT staff no longer get paged at 3am in the morning, and fewer days are spent in the "war room". They now have confidence that thelaunch will be successful.
Ritika Gunnar played the role of "Operations manager". She highlightedfive areas:
"Service viewer" dashboard with green/yellow/red indicators forall of their edge, application and datbase servers. This allowsher to get data 4-5 times faster and more accurate.
Tivoli Enterprise Portal eliminates bouncingaround various products.
Tivoli Common Reporting for CPU utilization of all systems, helps find excess capacity usingIBM Tivoli Monitor
On average, 85 percent of problems are caused by IT changes to the environment. IBM can help find dependencies, so that changes in one area do not impact other areas unexpectedly
Process Automation will Show changes that have been completed, in progress, or overdue.She can see all steps in a task or change request. A"workflow" automates all the key steps that need to be taken.
Laura Knapp played the role of "Facilities manager". She wanted to See all processes that apply to her work using a role-based process dashboard. The advantage of using IBM is that it changes work habits, reduces overtimeby 42 percent, improves morale. The IT staff now works as team,collaborates more, and jobs get done faster with fewer mistakes.Employees are online, accessing, monitoring and managing dataquicker. In days not weeks.
IBM Tivoli Enterprise Console (TEP) served as a common vehicle.She was able to pull up floor plan online, displaying all of the managed assets and mapped features. With the temperature overlay from Maximo Spatial, she was able to review hot spots on data center floor. Heat can cause servers to fail or shut down.
Power utilization chart at peak loadsCan now anticipate, predict and watch power consumption,and were able to justify replacement with newer, more energy-efficient equipment.
The CIO got back on stage, and explained the great success of thelaunch. They use Webstore usage tracking, security tools tracking all new registrations, and trackingserver and storage load.It now only takes hours, not weeks, to add new business partners and distributors.Tivoli Service Quality Assurance toolstrack all orders placed, processed, and shipped.Faster responsiveness is competitive advantage. TheirIT department is no longer seen as stodgy group, but as a world classorganization.
The live demo showed how IBM can help clients with rapid decisionmaking, speed and accuracy of change processes, and automation to take actions quickly. The result is a strong return on investment (ROI).
Liz Smith, IBM General Manager of Infrastructure Services, presented the results of an IBM survey to CEOs and CIOs asking questions like: What is the next big impact? Where are you investing?What will new datacenter look like?
The five key traits they found for companies of the future:
They were hungry for change
Innovative beyond customer imagination
Disruptive by nature
Genuine, not just generous
The IT infrastructure must be secure, reliable, and flexible.Taking care of environment is a corporate responsibility, notjust a way to reduce costs.
The five entry points for IBM Service Management: Integrate, Industrialize,Discover,Monitor and Protect.IBM Service management and compliance are critical for theGlobally Integrated Enterprise, with repeatable, scalable and consistent processes that enablechange to an automated workflow. This reduces errors, risks and costs, and improves productivity.IBM has talent, assets and experience to help any client get there.
Lance lives in Austin, TX, where IBM Tivoli is headquartered,so this made a good choice as a keynote speaker.He is best known for winning seven "Tour de France" bicycle races in a row, but he spoke instead gave an inspirational talk about how he survived cancer.
In 1996, Lance was diagnosed with cancer. Surprisingly, He said it was thegreatest thing that happened to him, and gave him new perspective on his life, family and the sport ofbicycling.Back then, there wasn't a webMD, Google or other Web 2.0 socialnetworking sites for Lance to better understand what he wasgoing through, learn more about treatment options, or find othersgoing through the same ordeal.
After his treatment, he was considered "damaged goods" by manyof the leading European bicycle teams. So, he joined the US Postal Serviceteam, not known for their wins, but often invited to sell TVrights to American audiences. Collaborating with his coachesand other members of his team, he revolutionized the bicycling sport, analyzed everything about the race, and built up morale.He won the first "yellow jersey" in 1999, and did so each yearfor a total of seven wins.
Lance formed the [Livestrong foundation] to help other cancer survivors. Nike came to him and proposed donating 5 million "rubber bracelets"colored yellow to match his seven yellow jerseys, with the name "Livestrong" embossed on them, that his foundation couldthen sell for one dollar apiece to raise funds. What some thought was a silly idea at first has started amovement.At the 2004 Olympics, many athletes from all nations and religious backgrounds, wore these yellow braceletsto show solidarity with this cause.To date, the foundation has sold over 72 million yellow bracelets, and these have served to provide a symbol,a brand, a color identity, to his cause.
He explained that doctor's have a standard speech to cancer survivors.As a patient, you can go out this doorway and never tell anyone,keep the situation private. Or you can go out this other doorway, you tell everybody your story. Lance chose the latter, and he felt it was the best decision he ever made.He wrote a book titled [It's Not About the Bike: My Journey Back to Life].
His call to action for the audience: find out what can you do to make a difference.A million non-governmental organizations[NGO] have started in the past 10 years. Don't just give cash, also give your time and passion.
Continuing my summary of Pulse 2008, the premiere service managementconference focusing on IBM Tivoli solutions, I attended and presentedbreakout sessions on Monday afternoon.
Tivoli Storage "State-of-the-Subgroup" update
Kelly Beavers, IBM director of Tivoli Storage, presented the first breakout for all of the Tivoli Storage subgroup.Tivoli has several subgroups, but Tivoli Storage leads with revenuesand profits over all the others.Tivoli storage has top performing business partner channel of anysubgroup in IBM's Software Group division.IBM is world's #1 provider of storage vendor (hardware, softwareand services), so this came to no surprise to most of the audience.
Looking at just the Storage Software segment, it is estimatedthat customers will spend $3.5 billion US dollars more in the year 2011 than they did last year in 2007. IBM is #2 or #3 in eachof the four major categories: Data Protection, Replication, Infrastructure management, and Resource management. In eachcategory, IBM is growing market share, often taking away share fromthe established leaders.
There was a lot of excitement over the FilesX acquisition.I am still trying to learn more about this, but what I have gathered so far is that it can:
Like turning a "knob", you can adjust the level of backupprotection from traditional discrete scheduled backups, to morefrequent snapshots, to continuous data protection (CDP). Inthe past, you often used separate products or features to dothese three.
Perform "instantaneous restore" by performing a virtualmount of the backup copy. This gives the appearance that therestore is complete.
This year marks the 15th anniversary of IBM Tivoli StorageManager (TSM), with over 20,000 customers. Also, this yearmarks the 6th year for IBM SAN Volume Controller, having soldover 12,000 SVC engines to over 4,000 customers.
Data Protection Strategies
Greg Tevis, IBM software architect for Tivoli Technical Strategy,and I presented this overview of data protection. We coveredthree key areas:
Protecting against unethical tampering with Non-erasable, Non-rewriteable (NENR) storage solutions
Protecting against unauthorized access with encryption ondisk and tape
Protecting against unexpected loss or corruption with theseven "Business Continuity" tiers
There was so much interest in the first two topics that weonly had about 9 minutes left to cover the third! Fortunately,Business Continuity will be covered in more detail throughoutthe week.
Henk de Ruiter from ABN Amro bank presented his success storyimplementing Information Lifecycle Management (ILM) across hisvarious data centers using IBM systems, software and services.
Making your Disk Systems more Efficient and Flexible
I did not come up with the titles of these presentations. Theteam that did specifically chose to focus on the "business value"rather than the "products and services" being presented. Inthis session, Dave Merbach, IBM software architect, and I presentedhow SAN Volume Controller (SVC), TotalStorage Productivity Center,System Storage Productivity Center, Tivoli Provisioning Managerand Tivoli Storage Process Manager work to make your disk storagemore efficient and flexible.
I'm glad to be back home in Tucson for a few weeks. All of these conferences kept mefrom reading up with what was going on in the blogosphere.
A few of us at IBM found it odd that EMC would announce their new Geographically Dispersed Disaster Restart (GDDR) the weekBEFORE their "EMC World" conference. Why not announce all of the stuff all at once instead at the conference?Were they worried that the admission that "Maui" software is still many months awaythat much of a negative stigma? The decision probably went something like this:
EMCer #1: GDDR is finally ready, should we announce now, or wait ONE week to make it part of the thingswe announce at EMC World?
EMCer #2: We are not announcing much at EMC World and what people really want us to talk about, Maui, wearen't delivering for a while. Why can't people understand we are company of hardware engineers, not software programmers! So, better not be associated with that quagmire at all.
EMCer #1: Yes, boss, I see your point. We'll announce this week then.
My fellow blogger and intellectual sparring partner, Barry Burke, on his Storage Anarchist blog, posted [are you wasting money on your mainframe dr solution?"] to bringup the GDDR announcement. The key difference is that IBM GDPS works withIBM, EMC and HDS equipment, being the fair-and-balanced folks that IBM clientshave come to expect, but it appears EMC GDDR works only with EMC equipment.Because GDDR does less, it also costs less. I can accept that. You get whatyou pay for. Of course, IBM does have a variety of protection levels, one probably will meet your budget and your business continuity needs.
To correct Barry's misperception, companies that buy IBM mainframe servers do have a choice.They can purchase their operating system from IBM, get their Linux or OpenSolarisfrom someone else like Red Hat or Novell, or build their own OS distribution fromreadily available open source. And unlike other servers that might require at leastone OS partition from the vendor, IBM mainframes can run 100 percent Linux.GDPS supports a mix of OS data. z/OS and Linux data can all be managed by GDPS.Companies that own mainframes know this. I can forgive the misperception from Barry,as EMC is focused on distributed servers instead, and many in their company may not have muchexposure to mainframe technology, or have ever spoken to mainframe customers.
But what almost had me fall out of my chair was this little nugget from his post:
"If you're an IBM mainframe customer, you are - by definition - IBM's profit stream."
Honestly, is there anyone out there that does not realize that IBM is a for-profitcorporation? In contrast, Barry would like his readers to believe that EMC is selling GDDR at cost, andthat EMC is a non-profit organization. While IBM has been delivering actual solutions thatour clients want, EMC continues to rumor that someday they might get around to offering something worthwhile.In the last six months, the shareholders have interpreted both strategies for what they really are,and the stock prices reflect that:
(Disclosure: I own IBM stock. I do not own EMC stock. Stock price comparisonsby Yahoo were based on publicly reported information. The colors blue and red to represent IBM and EMC, respectively, were selected by Yahoo graph-making facility. The color red does not necessarily imply EMC is losing money or having financial troubles.)
Of course, I for one would love to help Barry's dream of EMC non-profitability come true. If anyone has any suggestions how we can help EMC approach this goal, please post a comment below.
IBM is hosting a webcast about storage for SAP Environments. Learn how integrated IBM infrastructure solutions, specifically, customized for your SAP environments, can help lower your business costs, increases productivity in SAP development and test tasks, and improve resource utilization. This will include discussion of archive solutions with WebDAV, ArchiveLink and DR550;IBM Business Intelligence (BI) Accelerator; IBM support for SAP [Adaptive Computing]; and performance benchmark results. The session is intended for SAP and storage administrators, IT directorsand managers.
Here are the details:
Date: Wednesday, June 18, 2008
Time: 11:00am EDT (8:00am for those of us in Arizona or California)
Two weeks ago, I mentioned in my post [Pulse 2008 - Day 2 Breakout sessions] thatHenk de Ruiter from ABN Amro bank presented his success storyimplementing Information Lifecycle Management (ILM) across hisvarious data centers. I am no stranger to ABN Amro, having helped "ABN" and "Amro" banks merge their mainframe data in 1991. Henk has agreed to let me share with my readers more ofthis success story here on my blog:
Back in December 2005, Henkand his colleagues had come to visit the IBM Tucson ExecutiveBriefing Center (EBC) to hear about IBM products and services. At the time, I was part of our "STG Lab Services" team that performed ILM assessments at client locations. I explained to ABN Amro that the ILM methodology does not requirean all-IBM solution, and that ILM could even provide benefits with their current mix of storage, software and service providers.The ABN Amro team liked what I had to say, andmy team was commissioned to perform ILM assessments atthree of their data centers:
Sao Paulo (Brazil)
Chicago, IL (USA)
Each data center had its own management, its owndecision making, and its own set of issues, so we structuredeach ILM assessment independently. When we presented our results,we showed what each data center could do better with their existing mixed bagof storage, software and service providers, and also showed howmuch better their life would be with IBM storage, software andservices. They agreed to give IBM a chance to prove it, and soa new "Global Storage Study" was launched to take the recommendationsfrom our three ILM studies, and flesh out the details to make aglobally-integrated enterprise work for them. Once completed,it was renamed the "Global Storage Solution" (GSS).
Henk summarized the above with "I am glad to see Tony Pearsonin the audience, who was instrumental to making this all happen."As with many client testimonials, he presented a few charts onwho ABN Amro is today, the 12th largest bank worldwide, 8th largest in Europe. They operate in 53 countries and manage over a trillioneuros in assets.
They have over 20 data centers, with about 7 PB of disk, and over20 PB of tape, both growing at 50 to 70 percent CAGR. About 2/3 of theiroperations are now outsourced to IBM Global Services, the remaining 1/3is non-IBM equipment managed by a different service provider.
ABN Amro deployed IBM TotalStorage Productivity Center, variousIBM System Storage DS family disk systems, SAN Volume Controller (SVC), Tivoli StorageManager (TSM), Tivoli Provisioning Manager (TPM), and several other products. Armed with these products, they performed the following:
Clean Up. IBM uses the term "rationalization" to relate to the assignment of business value, to avoid confusion with theterm "classification" which many in IT relate to identifyingownership, read and write authorization levels. Often, in theinitial phases of an ILM deployment, a portion of the data isdetermined to be eligible for clean up, either to move to a lower-cost tier or deleted immediately. ABN Amro and IBM set a goal to identifyat least 20 percent of their data for clean up.
New tiers. Rather than traditional "storage tiers" which are often justTier 1 for Fibre Channel disk and Tier 2 for SATA disk, ABN Amroand IBM came up with seven "information infrastructure tiers" thatincorporate service levels, availability and protection status.They are:
High-performance, Highly-available disk with Remote replication.
High-performance, Highly-available disk (no remote replication)
Mid-performance, high-capacity disk with Remote replication
Mid-performance, high-capacity disk (no remote replication)
Non-erasable, Non-rewriteable (NENR) storage employinga blended disk and tape solution.
Enterprise Virtual Tape Library with remote replicationand back-end physical tape
Mid-performance physical tape
These tiers are applied equally across their mainframe anddistributed platforms. All of the tiers are priced per "primary GB", so any additional capacity required for replication orpoint-in-time copies, either local or remote, are all folded into the base price.ABN Amro felt a mission-critical applicationon Windows or UNIX deserves the same Tier 1 service level asa mission-critical mainframe application. Exactly!
Deployed storage virtualization for disk and tape. Thisinvolved the SAN Volume Controller and IBM TS7000 series library.
Implemented workflow automation. The key product here is IBM Tivoli Provisioning Manager
Started an investigation for HSM on distributed. This would be policy-based space management to migrate lessfrequently accessed data to the TSM pool for Windows or UNIX data.
While the deployment is not yet complete, ABN Amro feels they have alreadyrecognized business value:
Reduced cost by identifying data that should be stored on lower tiers
Simplified management, consolidated across all operating systems (mainframe, UNIX, Windows)
Increased utilization of existing storage resources
Reduced manual effort through policy-based automation, which can lead to fewer human errors and faster adaptability to new business opportunities
Standardized backup and other operational procedures
Henk and the rest of ABN Amro are quite pleased with the progress so far,although recent developments in terms of the takeover of ABN AMRO by aconsortium of banks means that the model is only implemented so far in Europe. Further rollout depends on the storage strategy of the new owners. Nonetheless,I am glad that I was able to work with Henk, Jason, Barbara, Steve, Tom, Dennis, Craig and othersto be part of this from the beginning and be able to see it rollout successfully over the years.
Based on this success, and perhaps because I am also fluent in Spanish, I was asked to help with Proyecto Ceibal, the team for OLPC Uruguay. Normally theXS school server resides at the school location itself, so that even if the internet connection is disrupted or limited, the school kids can continue to access each other and the web cache content until internet connection is resumed.However, with a diverse developmentteam with people in United States, Uruguay, and India, we first looked to Linux hosting providers that wouldagree to provide free or low-cost monthly access. We spent (make that "wasted") the month of May investigating.Most that I talked to were not interested in having a customized Linux kernel on non-standard hardware on their shop floor, and wanted instead to offer their own standard Linux build on existing standard servers, managed by theirown system administrators, or were not interested in providing it for free. Since the XS-163 kernel is customizedfor the x86 architecture, it is one of those exceptions where we could not host it on an IBM POWER or mainframe as a virtual guest.
This got picked up as an [idea] for the Google's[Summer of Code] and we are mentoring Tarun, a 19-year-old student to actas lead software developer. However, summer was fast approaching, and we wanted this ready for the next semester. In June, our project leader, Greg, came up with a new plan. Build a machine and have it connected at an internet service provider that would cover the cost of bandwidth, and be willing to accept this with remote administration. We found a volunteer organization to cover this -- Thank you Glen and Vicki!
We found a location, so the request to me sounded simple enough: put together a PC from commodity parts that meet the requirements of the customizedLinux kernel, the latest release being called [XS-163]. The server would have two disk drives, three Ethernet ports, and 2GB of memory; and be installed with the customized XS-163 software, SSHD for remote administration, Apache web server, PostgreSQL database and PHP programming language.Of course, the team wanted this for as little cost as possible, and for me to document the process, so that it could be repeated elsewhere. Some stretch goals included having a dual-boot with Debian 4.0 Etch Linux for development/test purposes, an alternative database such as MySQL for testing, a backup procedure, and a Recover-DVD in case something goes wrong.
Some interesting things happened:
The XS-163 is shipped as an ISO file representing a LiveCD bootable Linux that will wipe your system cleanand lay down the exact customized software for a one-drive, three-Ethernet-port server. Since it is based on Red Hat's Fedora 7 Linux base, I found it helpful to install that instead, and experiment moving sections of code over.This is similar to geneticists extracting the DNA from the cell of a pit bull and putting it into the cell for a poodle. I would not recommend this for anyone not familiar with Linux.
I also experimented with modifying the pre-built XS-163 CD image by cracking open the squashfs, hacking thecontents, and then putting it back together and burning a new CD. This provided some interesting insight, but in the end was able to do it all from the standard XS-163 image.
Once I figured out the appropriate "scaffolding" required, I managed to proceed quickly, with running versionsof XS-163, plain vanilla Fedora 7, and Debian 4, in a multi-boot configuration.
The BIOS "raid" capability was really more like BIOS-assisted RAID for Windows operating system drivers. This"fake raid" wasn't supported by Linux, so I used Linux's built-in "software raid" instead, which allowed somepartitions to be raid-mirrored, and other partitions to be un-mirrored. Why not mirror everything? With two160GB SATA drives, you have three choices:
No RAID, for a total space of 320GB
RAID everything, for a total space of 160GB
Tiered information infrastructure, use RAID for some partitions, but not all.
The last approach made sense, as a lot of of the data is cache web page images, and is easily retrievable fromthe internet. This also allowed to have some "scratch space" for downloading large files and so on. For example,90GB mirrored that contained the OS images, settings and critical applications, and 70GB on each drive for scratchand web cache, results in a total of 230GB of disk space, which is 43 percent improvement over an all-RAID solution.
While [Linux LVM2] provides software-based "storage virtualization" similar to the hardware-based IBM System Storage SAN Volume Controller (SVC), it was a bad idea putting different "root" directories of my many OS images on there. With Linux, as with mostoperating systems, it expects things to be in the same place where it last shutdown, but in a multi-boot environment, you might boot the first OS, move things around, and then when you try to boot second OS, it doesn'twork anymore, or corrupts what it does find, or hangs with a "kernel panic". In the end, I decided to use RAIDnon-LVM partitions for the root directories, and only use LVM2 for data that is not needed at boot time.
While they are both Linux, Debian and Fedora were different enough to cause me headaches. Settings weredifferent, parameters were different, file directories were different. Not quite as religious as MacOS-versus-Windows,but you get the picture.
During this time, the facility was out getting a domain name, IP address, subnet mask and so on, so I testedwith my internal 192.168.x.y and figured I would change this to whatever it should be the day I shipped the unit.(I'll find out next week if that was the right approach!)
Afraid that something might go wrong while I am in Tokyo, Japan next week (July 7-11), or Mumbai, India the following week (July 14-18), I added a Secure Shell [SSH] daemon that runs automaticallyat boot time. This involves putting the public key on the server, and each remote admin has their own private key on their own client machine.I know all about public/private key pairs, as IBM is a leader in encryption technology, and was the first todeliver built-in encryption with the IBM System Storage TS1120 tape drive.
To have users have access to all their files from any OS image required that I either (a) have identical copieseverywhere, or (b) have a shared partition. The latter turned out to be the best choice, with an LVM2 logical volumefor "/home" directory that is shared among all of the OS images. As we develop the application, we might findother directories that make sense to share as well.
For developing across platforms, I wanted the Ethernet devices (eth0, eth1, and so on) match the actual ports they aresupposed to be connected to in a static IP configuration. Most people use DHCP so it doesn't matter, but the XSsoftware requires this, so it did. For example, "eth0" as the 1 Gbps port to the WAN, and "eth1/eth2" as the two 10/100 Mbps PCI NIC cards to other servers.Naming the internet interfaces to specific hardware ports wasdifferent on Fedora and Debian, but I got it working.
While it was a stretch goal to develop a backup method, one that could perform Bare Machine Recovery frommedia burned by the DVD, it turned out I needed to do this anyways just to prevent me from losing my work in case thingswent wrong. I used an external USB drive to develop the process, and got everything to fit onto a single 4GB DVD. Using IBM Tivoli Storage Manager (TSM) for this seemed overkill, and [Mondo Rescue] didn't handle LVM2+RAID as well as I wanted, so I chose [partimage] instead, which backs up each primary partition, mirrored partition, or LVM2 logical volume, keeping all the time stamps, ownerships, and symbolic links in tact. It has the ability to chop up the output into fixed sized pieces, which is helpful if you are goingto burn them on 700MB CDs or 4.7GB DVDs. In my case, my FAT32-formatted external USB disk drive can't handle files bigger than 2GB, so this feature was helpful for that as well. I standardized to 660 GiB [about 692GB] per piece, sincethat met all criteria.
The folks at [SysRescCD] saved the day. The standard "SysRescueCD" assigned eth0, eth1, and eth2 differently than the three base OS images, but the nice folks in France that write SysRescCD created a customized[kernel parameter that allowed the assignments to be fixed per MAC address ] in support of this project. With this in place, I was able to make a live Boot-CD that brings up SSH, with all the users, passwords,and Ethernet devices to match the hardware. Install this LiveCD as the "Rescue Image" on the hard disk itself, and also made a Recovery-DVD that boots up just like the Boot-CD, but contains the 4GB of backup files.
For testing, I used Linux's built-in Kernel-based Virtual Machine [KVM]which works like VMware, but is open source and included into the 2.6.20 kernels that I am using. IBM is the leadingreseller of Vmware and has been doing server virtualization for the past 40 years, so I am comfortable with thetechnology. The XS-163 platform with Apache and PostgreSQL servers as a platform for [Moodle], an open source class management system, and the combination is memory-intensive enough that I did not want to incur the overheads running production this manner, but it wasgreat for testing!
With all this in place, it is designed to not need a Linux system admin or XS-163/Moodle expert at the facility. Instead, all we need is someone to insert the Boot-CD or Recover-DVD and reboot the system if needed.
Just before packing up the unit for shipment, I changed the IP addresses to the values they need at the destination facility, updated the [GRUB boot loader] default, and made a final backup which burned the Recover-DVD. Hopefully, it works by just turning on the unit,[headless], without any keyboard, monitor or configuration required. Fingers crossed!
So, thanks to the rest of my team: Greg, Glen, Vicki, Tarun, Marcel, Pablo and Said. I am very excited to bepart of this, and look forward to seeing this become something remarkable!
Earlier this year, IBM launched its[New Enterprise Data Center vision]. The average data center was built 10-15 years ago,at a time when the World Wide Web was still in its infancy, some companies were deploying their first storage areanetwork (SAN) and email system, and if you asked anyone what "Google" was, they might tell you it was ["a one followed by a hundred zeros"]!
Full disclosure: Google, the company, justcelebrated its [10th anniversary] yesterday, and IBM has partnered with Google on a varietyof exciting projects. I am employed by IBM, and own stock in both companies.
In just the last five years, we saw a rapid growth in information, fueled by Web 2.0 social media, email, mobile hand-held devices, and the convergenceof digital technologies that blurs the lines between communications, entertainment and business information. This explosion in information is not just "more of the same", but rather a dramatic shift from predominantly databases for online transaction processing to mostly unstructured content. IT departments are no longer just the"back office" recording financial transactions for accountants, but now also take on a more active "front office" role. For a growing number of industries, information technology plays a pivotal role in generating revenue, making smarter business decisions, and providing better customer service.
IBM felt a new IT model was needed to address this changing landscape, so IBM's New Enterprise Data Center vision has these five key strategic initiatives:
Highly virtualized resources
Business-driven Service Management
Green, Efficient, Optimized facilities
In February, IBM announced new products and features to support the first two initiatives, including the highlyvirtualized capability of the IBM z10 EC mainframe, and and related business resiliency features of the [IBM System Storage DS8000 Turbo] disk system.
In May, IBM launched its Service Management strategic initiative at the Pulse 2008 conference. I was there in Orlando, Florida at the Swan and Dolphin resort to present to clients. You can read my three posts:[Day 1; Day 2 Main Tent; Day 2 Breakout sessions].
In June, IBM launched its fourth strategic initiative "Green, Efficient and Optimized Facilities" with [Project BigGreen 2.0], which included the Space-Efficient Volume (SEV) and Space-Efficient FlashCopy (SEFC) capabilitiesof the IBM System Storage SAN Volume Controller (SVC) 4.3 release. Fellow blogger and IBM master inventor Barry Whyte (BarryW) has three posts on his blog about this:[SVC 4.3.0Overview; SEV and SEFCdetail; Virtual Disk Mirroring and More]
Some have speculated that the IBM System Storage team seemed to be on vacation the past two months, with few pressreleases and little or no fanfare about our July and August announcements, and not responding directly to critics and FUD in the blogosphere.It was because we were holding them all for today's launch, taking our cue from a famous perfume commercial:
"If you want to capture someone's attention -- whisper."
My team and I were actually quite busy at the [IBM Tucson Executive Briefing Center]. In between doing our regular job talking to excited prospects and clients,we trained sales reps and IBM Business Partners, wrote certification exams, and updated marketing collateral. Fortunately, competitors stopped promotingtheir own products to discuss and demonstrate why they are so scared of what IBM is planning.The fear was well justified. Even a few journalists helped raise the word-of-mouth buzz and excitement level. A big kiss to Beth Pariseau for her article in [SearchStorage.com]!
(Last week we broke radio silence to promote our technology demonstration of 1 million IOPS using Solid StateDisk, just to get the huge IBM marketing machine oiled up and ready for today)
Today, IBM General Manager Andy Monshaw launchedthe fifth strategic initiative, [IBM Information Infrastructure], at the[IBM Storage and Storage Networking Symposium] in Montpellier, France. Montpellier is one of the six locations of our New Enterprise Data Center Leadership Centers launched today. The other five are Poughkeepsie, Gaithersburg, Dallas, Mainz and Boebligen, with more planned for 2009.
Although IBM has been using the term "information infrastructure" for more than 30 years, it might be helpful to define it for you readers:
“An information infrastructure comprises the storage, networks, software, and servers integrated and optimized to securely deliver information to the business.”
In other words, it's all the "stuff" that delivers information from the magnetic surface recording of the disk ortape media to the eyes and ears of the end user. Everybody has an information infrastructure already, some are just more effective than others. For those of you not happy with yours, IBM hasthe products, services and expertise to help with your data center transformation.
IBM wants to help its clients deliver the right information to theright people at the right time, to get the most benefits of information, while controlling costs and mitigatingrisks. There might be more than a dozen ways to address the challenges involved, but IBM's Information Infrastructure strategic initiative focuses on four key solution areas:
Last, but not least, I would like to welcome to the blogosphere IBM's newest blogger, Moshe Yanai, formerly the father of the EMC Symmetrix and now leading the IBM XIV team. Already from his first poston his new [ThinkStorage blog], I can tell he is not going to pullany punches either.
In yesterday's post, [IBM Information Infrastructure launches today], I explained how this strategic initiative fit into IBM's New EnterpriseData Center vision. For those who prefer audio podcasts, here is Marissa Benekos interviewing Andy Monshaw, IBM General Manager of IBM System Storage.
This post will focus on Information Availability, the first of the four-part series this week.
Here's another short 2-minute video, on Information Availability
I am not in marketing department anymore, so have no idea how much IBM spentto get these videos made, but hate for the money to go wasted. I suspect theonly way they will get viewed is if I include them in my blog. I hope youlike them.
As with many IT terms, "availability" might conjure up different meanings for different people.
Some can focus on the pure mechanics of delivering information. An information infrastructure involves all of thesoftware, servers, networks and storage to bring information to the application or end user, so all of the chainsin the link must be highly available: software should not crash, servers should have "five nines" (99.999%) uptime, networks should be redundant, and storage should handle the I/O request with sufficient performance. For tape libraries, the tape cartridge must be available, robotics are needed to fetch the tape, and a drive must be available toread the cartridge. All of these factors represent the continuous operations and high availability features of business continuity.
In addition to the IT equipment, you need to make sure your facilities that support that equipment, such aspower and cooling, are also available.Independent IT analyst Mark Peters from Enterprise Strategy Group (ESG) summarizes his shock about the findings in a recent [survey commissioned by Emerson Network Power]on his post [Backing Up Your Back Up]. Here is an excerpt:
"The net take-away is that the majority of SMBs in the US do not have back-up power systems. As regional power supplies get more stretched in many areas, the possibility of power outages increases and obviously many SMBs would be vulnerable. Indeed, while the small business decision makers questioned for the survey ranked such power outages ahead of other threats (fires, government regulation, weather, theft and employee turnover) only 39% had a back-up power system. Yeah, you could say, but anything actually going wrong is unlikely; but apparently not, as 79% of those surveyed had experienced at least one power outage during 2007. Yeah, you might say, but maybe the effects were minor; again, apparently not, since 42% of those who'd had outages had to actually close their businesses during the longest outages. The DoE says power outages cost $80 billion a year and businesses bear 98% of those costs."
Others might be more concerned about outages resulting from planned and unplanned downtime. Storage virtualizationcan help reduce planned downtime, by allowing data to be migrated from one storage device to another withoutdisrupting the application's ability to read and write data. The latest "Virtual Disk Mirroring" (VDM) feature of the IBM System Storage SAN Volume Controller takes it one stepfurther, providing high-availability even for entry-level and midrange disk systems managed by the SVC.For unplanned downtime, IBM offers a complete range of support, from highly available clusters, two-site and three-site disaster recovery support, and application-aware data protection through IBM Tivoli Storage Manager.
Many outages are caused by human error, and in many cases it is the human factor that prevent quick resolution.Storage admins are unable to isolate the failing component, identify the configuration or provide the appropriateproblem determination data to the technical team ready to offer support and assistance. For this, IBM TotalStorageProductivity Center software, and its hardware-version the IBM System Storage Productivity Center, can helpreduce outage time and increase information availability. It can also provide automation to predict or provideearly warning of impending conditions that could get worse if not taken care of.
But perhaps yet another take on information availability is the ability to find and communicate the right informnationto the right people at the right time. Recently, Google announced a historic milestone, their search engine nowindexes over [One trillion Web pages]!Google and other search engines have changed the level of expectations for finding information. People ask whythey can find information on the internet so quickly, yet it takes weeks for companies to respond to a judge foran e-discovery request.
Lastly, the team at IBM's[Eightbar blog] pointedme to Mozilla Lab's Ubiquity project for their popular FireFox browser. This project aims to help people communicate the information in a more natural way, rather than unfriently URL links on an email. It is still beta, of course, but helps show what "information availability" might be possible in the near future.Here is a 7-minute demonstration:
For those who only read the first and last paragraphs of each post, here is my recap:Information Availability includes Business Continuity and Data Protection to facilitatequick recovery, storage virtualization to maximize performance and minimize planned downtime, infrastructure management and automation to reduce human error, and the ability to find and communicate information to others.
"IBM announced that Northwest Radiology Network has gone live with a new virtualized enterprise of IBM servers and storage to support its growing medical imaging needs, giving its four locations an enterprise-class infrastructure which enables its doctors to recover medical image reports faster for analysis and enables remote 24x7 access to its medical image report system.
Founded in 1967, Northwest Radiology (NWR) is ranked as one of the largest physician groups in the Indianapolis, Indiana area. With 180 employees who offer the Central Indiana community comprehensive inpatient and outpatient imaging services such as mammography, ultrasonography, CT scans, PET-CT scans, bone density scans and MRIs – the Network had a dramatic need to develop a centralized infrastructure where large amounts of data could be stored and shared. A new data center would benefit the company’s clientele; which includes area hospitals and doctor’s offices serving thousands of patients each year.
Storing more than ten thousand medical imaging reports and radiographic images each month for doctors to analyze, the Network realized it had single points of failure and at one point a critical report server failed. Northwest Radiology turned to IBM and IBM Business Partner Software Information Systems (SIS) for a more efficient solution to prevent any possible downtime in the future.
SIS recommended and installed a virtualized infrastructure with IBM servers and storage as the heart of Northwest Radiology’s Indianapolis data center. By April 2007, Northwest Radiology replaced eight servers and direct attached storage with just two IBM System x3650 servers connected to an IBM System Storage DS3400. Today, the new servers run 15 virtual servers to ensure the availability of their services 24x7. When the business needs it, a new server can be provisioned in just minutes. With a Fibre Channel on the SAN Disk, the DS3400 not only increased performance but also met NWR’s requirement to not have one single point of failure. With three TB of storage capacity, they can meet the demands of increased business well into the future. The systems are also now easily managed from a remote site."
“Uptime is paramount in our business. We selected IBM based on the reliability and flexibility of IBM System x servers and the IBM System Storage DS3400,” said Marty Buening, IT Director, Northwest Radiology Network. “The virtualized infrastructure and the SAN storage array that SIS and IBM brought to the table is improving our service and giving our doctors and staff piece of mind knowing each patient’s medical imaging reports are always available.”
Second, we have [Iowa Health System], a large enterprise with over 19,000 employees, managing four million patients and hundreds of TBs of data.
Here is a 4-minute video on IBM TV from the good folks at Iowa Health System discussing theIBM Grid Medical Archive Solution (GMAS) as part of their information infrastructure for theirPicture Archiving and Communication Systems (PACS) application.
In both cases, IBM technology was able to provide remote access to medical information, making images and patient records available to more doctors, specialists and radiologists. Last January, in my post[Five in Five], IBM had predicted that remote access to healthcare would have an impact over the next five years.
Whether you are a small company or a large one, IBM probably has the right solution for you.
Well, it's Tuesday again, which means IBM announcement day. With our [big launches] we had this year, there might be some confusion on IBM terminology on how announcements are handled.Basically, there are three levels:
Technology demonstrations show IBM's leadership, innovation and investment direction, without having to detail a specificproduct offering.Last month's[Project Quicksilver], for example, demonstrated the ability to handle over 1 million IOPS with Solid State Disk.IBM is committed to develop solid state storage to create real-world uses across a broad range of applications, middleware, and systems offerings.
A preview announcement does entail a specific product offering, but may not necessarily include pricing, packagingor specific availability dates.
An announcement also entails a specific product offering, and does include pricing, packaging and specific availability dates.
With our September 8 launch of the IBM Information Infrastructure strategic initiative, there were a mix of all three of these. Many of the preview announcements will be followed up with full announcements later this year. Today, the IBM Tivoli Advanced Backup andRecovery for z/OS v2.1 was announced.
Note: If you don't use z/OS on a System z mainframe, you can stop reading now.
As many of my loyal readers know, I was lead architect for DFSMS until 2001, and so functions related to DFSMS and z/OS are very near and dear to my heart. For Business Continuity, IBM created Aggregate Backup andRecovery Support (ABARS) as part of the DFSMShsm component. This feature created a self-contained backupimage from data that could be either on disk or tape, including migrated data. In the event of a disaster,an ABARS backup image can be used to bring back just the exact programs and data needed for a specific application, speeding up the recovery process, and allowing BC/DR plans to prioritize what is most important.
To help manage ABARS, IBM has partnered with [Mainstar Software Corporation]to offer a product that helps before, during and after the ABARS processing.
ABARS requires the storage admin to have a "selection list" of data sets to process as an aggregate.IBM Tivoli Advanced Backup and Recovery for z/OS includes Mainstar® ASAP™ to help identify the appropriatedata sets for specific applications, using information from job schedulers, JCL, and SMF records.
ABARS has two simple commands: ABACKUP to produce the backup image, and ARECOVER to recover it. However, ifyou have hundreds of aggregates, and each aggregate has several backups, you may need some help identifyingwhich image to recover from.IBM Tivoli Advanced Backup and Recovery for z/OS includes Mainstar® ABARS Manager™ to present a list ofinformation, making it easy to choose from. To help prep the ICF Catalogs, there is a CATSCRUB feature for either"empty" or "full" catalog recovery at the recovery site.
The fact that storage admins may not be intimately familiar with the applications they are backing up is a commonsource of human error. IBM Tivoli Advanced Backup and Recovery for z/OS includes Mainstar® All/Star™ to help validate that the data setsprocessed by ABACKUP are complete, to support any regulatory audit or application team verification.This critical data tracking/inventory reporting not only identifies what isn't backed up, so you can ensure that you are not missing critical data, but also can identify which data sets are being backed up multiple times by more than one utility, so you can reduce the occurrence of redundant backups.
With v2.1 of Tivoli Advanced Backup and Recovery for z/OS, IBM has integrated Tivoli Enterprise Portal (TEP)support. This allows you to access these functions through IBM Tivoli Monitor v6 GUI on a Linux, UNIX or Windowsworkstation. IBM Tivoli Monitor has full support to integrate Web 2.0, multi-media and frames. This meansthat any other product that can be rendered in a browser can be embedded and supported with launch-in-contextcapability.
(If you have not separately purchased a license to IBM Tivoli Monitoring V6.2, don't worry, you can obtainthe TEP-based function by acquiring a no-charge, limited use license to IBM Tivoli MonitoringServices on z/OS, V6.2.)
In addition to supporting IBM's many DFSMS backup methods, from ABARS to IDCAMS to IEBGENER, IBM Tivoli Advanced Backup and Recovery v2.1 can also support third-party products from Innovation Data Processing and Computer Associates.
As many people re-discover the mainframe as the cost-effective platform that it has always been, migratingapplications back to the mainframe to reduce costs, they need solutions that work across both mainframe anddistributed systems during this transition. IBM Tivoli Advanced Backup and Recovery for z/OS can help.
Lagasse, Inc. sells janitorial supplies, such as mops, cleaning chemicals, waste receptacles, and garbage can liners. Of the 1000 employees of Lagasse nationwide, about 200 associates were located in New Orleans at their main Headquarters, primary customer care center, and primary IT computing center.
Amazingly, Lagasse did not have a formally documented BCP (Business Continuity Plan) but more of aBCI (Business Continuity Idea). They chose to take a ["donut tire"] approach, putting older previous-generation equipment at their DR site. They knew that in the event of a disaster,they would not be processing as many transactions per second. That was a business trade-offthey could accept.
Evaluating all the different threat scenarios for impact and likelihood, and focused on hurricanes and floods.They had experienced previous hurricanes, learning from each,with the most recent being 2004 Hurricane Ivan and 2005 Hurricane Dennis. From this, they wereable to categorize three levels of DR recovery:
Tier 1 - The most mission-critical, which for them related to picking, packing and shipping products.
Tier 2 - The next most important, focused on maintaining good customer service
Tier 3 - Everything else, including reporting and administrative functions
The time-line of events went as follows:
The US Government issues warning that a hurricane may hit New Orleans
August 27 - 7pm
Lagasse declares a disaster, starts recovery procedures to an existing IT facility in Chicago, owned by their parent company. A temporary "Southeast" Headquarters were set up in Atlanta.Remote call centers were identified in Dallas, Atlanta, San Antonio, and Miami.
August 28 - just after midnight
In just five hours, they recovered their "Tier 1" applications.
August 28 - 7:30pm
In just over 24 hours, they recovered their "Tier 2" applications.
August 29 - 6am
The Hurricane hits land. With 73 levees breached, the city of New Orleans was flooded.
The following week
Lagasse was fully operational, and recorded their second and third best sales days ever.
I was quite impressed with their company's policy for how they treat their employees during a disaster. For many companies, people during a disaster prioritize on their families, not their jobs.If any associate was asked to work during a disaster, the company would take care of:
The safety of their family
The safety of their pets. (In the weeks following this hurricane, I sponsored people in Tucson to go to New Orleans to attend to lost and stray dogs and cats, many of which were left behind when rescuers picked up people from their rooftops.)
Any emergency repairs to secure the home they leave behind
Marshall felt that if you don't know the names of the spouse and kids of your key employees, you are not emotionally-invested enough to be successful during a disaster.
For communications, cell phones were useless. They could call out on them, but anyone with acell phone with 504 area code had difficulty receiving calls, as the calls had to be processedthrough New Orleans. Instead, they used Voice over IP (VoIP) to redirect calls to whichever remote call center each associate went to. Laptops, Citrix, VPN and email were considered powerful tools during this process. They did not have Instant Messaging (IM) at the time.
While the disk and tapes needed to recover Tiers 1 and 2 were already in Chicago, the tapes for Tier 3 were stored locally by a third-party provider. When Lagasse asked for thier DR tapes back, the third-party refused, based on their [force majeure] clause. Force majeure is a common clause in many business contracts to free parties from liabilityduring major disasters.Marshall advised everyone to strike out any "force majeure" clauses out of any future third-party DR protection contracts.
Hurricane Katrina hit the US hard, killing over 1400 people, and America still has not fully recovered. The recovery of thecity of New Orleans has been slow. Massive relocations has caused a deficit of talent inthe area, not just IT talent, but also in the areas of medicine, education and other professions. The result has been degraded social services, encouraging others to relocate as well. Some have called it the "liberation effect", a major event that causespeople to move to a new location or take on a new career in a different field.
On a personal note, I was in New Orleans for a conference the week prior to landfall, and helped clients with their recoveries the weeks after. For more on how IBM Business Continuity Recovery Services (BCRS) helped clients during Hurricane Katrina, see the following [media coverage].
This wraps up my week in Las Vegas for the 27th Annual [Data Center Conference]. This conference follows the common approach of ending at noon on Friday, so that attendees can get home to their families for the weekend, or start their weekend in Las Vegas early to watch the 50th annual Wrangler National Finals Rodeo.
I attended the last few sessions. Here is my recap:
Where, When and Why do I need a Solid-State Drive?
The internet provides transport of digital data between any devices. All other uses have evolved from this aim. Increasing data storage on any node on the Web therefore increases the possibilities at every other point. We are just now beginning to recognize the implications of this. The two speakers co-presented this session to cover how Solid State Disk (SSD) may participate.
Some electronic surveys of the audience provided some insight. Only 12 percent are deploying SSD now. 59 percent are evaluating the technology. A whopping 89 percent did not understand SSD technology, or how it would apply to their data center. Here is the expected time linefor SSD adoption:
17 percent - within 1 year
60 percent - around 3 years from now
21 percent - 5 years or later
The main reasons cited for adopting SSD were increasing IOPS, reducing power and floorspace requirements, and expanding global networks. Here's a side-by-side comparison between HDD and SSD:
Disk array with 120 HDD, 73GB drives
Disk array with 120 SSD, 32GB drives
Per 73GB drive
Per 32GB drive
100MB/sec per drive
Read 250 MB/sec per drive Write 170 MB/sec per drive
300 IOPS per drive
35,000 IOPS per drive
12 Watts per drive
2.4 Watts per drive
However, the cost-per-GB for SSD is still 25x over traditional spinning disk, andthe analysts expected SSD to continue to be 10-20x for a while. For now, they estimatethat SSD will be mostly found in blade servers, enterprise-class disk systems, andhigh-end network directors.
The speakers gave examples such as Sun's ZFS Hybrid, and other products from NetApp,Compellent, Rackable, Violin, and Verari Systems.
Taking fear out of IT Disaster Recovery Exercises
The analyst presented best practices for disaster recovery testing with a "Pay Now or Pay Later"pre-emptive approach. Here were some of the suggestions:
Schedule adequate time for DR exercises
Build DR considerations into change control procedures and project lifecycle planning
Document interdependencies between applications and business processes
Bring in the "crisis team" on even the smallest incidents to keep skill sharp
Present the "State of Disaster Recovery" to Senior Management annually
The speaker gave examples of different "tiers" for recovery, with appropriate RPO and RTOlevels, and how often these should be tested per year. A survey of the audience found that70 percent already have a tiered recovery approach.
In addition to IT staff, you might want to consider inviting others to the DR exerciseas reviewers for oversight, including: Line of Business folks, Facilities/Operations, Human Resources, Legal/Compliance officers, even members of government agencies.
DR exercises can be performed at a variety of scope and objectives:
Tabletop Test - IBM calls these "walk-throughs", where people merely sit around the table and discuss what actions they would take in the event of a hypothetical scenario. This is a good way to explore all kinds of scenarios from power outages, denial of service attacks, or pandemic diseases.
Checklist Review - Here a physical inventory is taken of all the equipment needed at the DR site.
Stand-alone Test - Sometimes called a "component test" or "unit test", a single application is recovered and tested.
End-to-End simulation - All applications for a business process are recovered for a full simulation.
Full Rehearsal - Business is suspended to perform this over a weekend.
Production Cut-Over - If you are moving data center locations, this is a good time to consider testing some procedures. Other times, production is cut-over for a week over to the DR site and then returned back to the primary site.
Mock Disaster - Management calls this unexpectedly to the IT staff, certain IT staff are told to participate, and others are told not to. This helps to identify critical resources, how well procedures are documented, and members of the team are adequately cross-trained.
For exercise, set the appropriate scope and objectives, score the results, and then identifyaction plans to address the gaps uncovered. Scoring can be as simple as "Not addressed","Needs Improvement" and "Met Criteria".
Full Speed Ahead for iSCSI
The analyst presented this final session of the conference. He recognized IBM's early leadership in this area back in 1999, with the IP200i disk system. Today, there are many storage vendors that provide iSCSI solutions, the top three being:
23 percent - Dell/EqualLogic
15 percent - EMC
14 percent - HP/LeftHand Networks
This protocol has been mostly adopted for Windows, Linux and VMware, but has been largelyignored by the UNIX community. The primary value proposition is to offer SAN-like functionality at lower cost. When using the existing NICs that come built-in on most servers, iSCSI canbe 30-50 percent less expensive than FC-based SANs. Even if you install TCP-Offload-Engine (TOE) cards into the servers, iSCSI can still represent a 16-19 percent cost savings. ManyIBM servers now have TOE functionality built-in.
Since lower costs are the primary motivator, most iSCSI deployments are on 1GbE. The new10Gbps Ethernet is still too expensive for most iSCSI configurations. For servers runninga single application, 2 1GbE NICs is sufficient. For servers running virtualization with multiple workloads might need 4 or 5 NICs (1GbE), or consider 2 10GbE NICs if 10Gbps is available.
The iSCSI protocol has been most successful for small and medium sized businesses (SMB) lookingfor one-stop shopping. Buying iSCSI storage from the same vendor as your servers makes a lot of sense: EqualLogic with Dell servers, LeftHand software with HP servers, and IBM's DS3300 or N series with IBM System x servers.The average iSCSI unit was 10TB for about $24,000 US dollars.
Security and Management software for iSCSI is not as fully developed as for FC-based SANs.For this reason, most network vendors suggest having IP SANs isolated from your regular LAN.If that is not possible, consider VPN or encryption to provide added security.Issues of security and management imply that iSCSI won't dominate the large enteprise data center. Instead, many arewatching closely the adoption of Fibre Channel over Ethernet (FCoE), based on revised standardsfor 10Gbps Ethernet. FCoE standards probably won't be finalized till mid-2009, with productsfrom major vendors by 2010, and perhaps taking as much as 10 percent marketshare by 2011.
I hope you have enjoyed this series of posts. In addition to the sessions I attended, theconference has provided me with 67 presentations for me to review. Those who attended couldpurchase all the audio recordings and proceedings of every session for $295 US dollars, and those who missed the event can purchase these for $595 US dollars. These are reasonable prices, when you realize that the average Las Vegas visitor spends 13.9 hours gambling, losing an average of $626 US dollars per visit. The audio recordings and proceedings can provide more than 13.9 hours of excitement for less money!
Continuing this week's series on Pulse 2009 video, we have a double header. Bob Dalton discusses our entry-level IBM System Storage [DS3000] and midrange IBM System Storage [DS4000] disk systems, followed by Dan Thompson discussing [IBM Tivoli Storage Manager FastBack] software.
IBM Tivoli Storage Manager FastBack is the result of IBM's [acquisition of FilesX], a company in Israel that developed software to backup servers at remote branch offices running Microsoft Windows operating system.
Over on his Backup Blog, fellow blogger Scott Waterhouse from EMC has a post titled
[Backup Sucks: Reason #38]. Here is an excerpt:
Unfortunately, we have not been able to successfully leverage economies of scale in the world of backup and recovery. If it costs you $5 to backup a given amount of data, it probably costs you $50 to back up 10 times that amount of data, and $500 to back up 100 times that amount of data.
If anybody can figure out how to get costs down to $40 for 10 times the amount of data, and $300 for 100 times the amount of data, they will have an irrefutable advantage over anybody that has not been able to leverage economies of scale.
I suspect that where Scott mentions we in the above excerpt, he is referring to EMC in general, with products like
Legato. Fortunately, IBM has scalable backup solutions, using either a hardware approach, or one purely with software.
The hardware approach involves using deduplication hardware technology as the storage pool for IBM Tivoli Storage Manager (TSM). Using this approach, IBM Tivoli Storage Manager would receive data from dozens, hundreds or even thousands
of client nodes, and the backup copies would be sent to an IBM TS7650 ProtecTIER data deduplication appliance, IBM TS7650G gateway, or IBM N series with A-SIS. In most cases, companies have standardized on the operating systems and applications used on these nodes, and multiple copies of data reside across employee laptops. As a result, as you have more nodes backing up, you are able to achieve benefits of scale.
Perhaps your budget isn't big enough to handle new hardware purchases at this time, in this economy. Have no fear,
IBM also offers deduplication built right into the IBM Tivoli Storage Manager v6 software itself. You can use sequential access disk storage pool for this. TSM scans and identifies duplicate chunks of data in the backup copies, and also archive and HSM data, and reclaims the space when found.
If your company is using a backup software product that doesn't scale well, perhaps now is a good time to switch over to IBM Tivoli Storage Manager. TSM is perhaps the most scalable backup software product in the marketplace, giving IBM an "irrefutable advantage" over the competition.