Well, it's Tuesday, and so it is "announcement day" again! Actually, for me it is Wednesday morning herein Mumbai, India, but since I was "press embargoed" until 4pm EDT in talking about these enhancements, I had to wait until Wednesday morning here to talk about them.
- World's Fastest 1TB tape drive
|IBM announced its new enterprise [TS1130 tape drive]and corresponding [TS3500 tape library support]. This one has a funny back-story. Last week while we were preparing the Press Release, we debated on whether we should compare the 1TB per cartridge capacity as double that of Sun's Enterprise T10000 (500GB), or LTO-4 (800GB). The problem changed when Sun announced on Monday they too had a 1TB tape drive, so now instead ofsaying that we had the "World's First 1TB tape drive", we quickly changed this to the "World's Fastest 1TB tape drive" instead. At 160MB/sec top speed, IBM's TS1130 is 33 percent faster than Sun's latest announcement. Sun was rather vague when they will actually ship their new units, so IBM may still end up being first to deliver as well.|
Here is an IBM podcast to hear more about it:
While EMC and other disk-only vendors have stopped claiming that "tape is dead", these recent announcements from IBM and Sun indicate that indeed tape is alive and well. IBM is able to borrow technologies from disk, such as the Giant Magneto Resistive (GMR) head over to its tape offerings, which means much of the R&D for disk applies to tape, keeping both forms ofstorage well invested. Tape continues to be the "greenest" storage option, more energy efficient than disk, optical, film, microfiche and even paper.
- Improved Reporting
On the LTO front, IBM enhanced the reporting capabilities of its[TS3310] midrange tape library. This includes identifying the resource utilization of the drives, reporting on media integrity, and improved diagnostics to support library-managed encryption.
- IBM System Storage DR550
As a blended disk-and-tape solution, the [IBM System Storage DR550] easily replaces the EMC Centera to meet compliance storagerequirements. IBM announced that we have greatly expanded its scalability, being able to support both 1TBdisk drives, as well as being able to attach to either IBM or Sun's 1TB tape drives.
- Massive Array of Idle Disks (MAID)
IBM now offers a "Sleep Mode" in the firmware of the [IBM System Storage DCS9550], which is often called "Massive Array of Idle Disks" (MAID) or spin-down capability. This can reduce the amount of power consumed during idle times.
That's a lot of exciting stuff. I'm off to breakfast now.
technorati tags: IBM, TS1130, TS3500, tape, systems, 1TB, drive, library, LTO, LTO-4, TS3310, Charlie Andrews, DR550, MAID, DCS9550, Sleep Mode, Sun, EMC
Well, it's Tuesday again, and we had several announcements this month, so here is a quick recap.We had some things announce May 13, and then some more announcements today, but since I was busywith conferences, will combine them into one post for the entire month of May 2008.
This time, I thought I would go "audio" with a recording from Charlie Andrews, IBM director ofproduct marketing for IBM System Storage:
If you are unable to listen, you can read the details for each here:
Also today IBM announced special 5-packs for LTO-4 and DDS-6 tape cartridge media. Here is the Press Release.
technorati tags: IBM, Charlie Andrews, TS7530, VTL, N series, NAS, disk system, LTO-4, DDS-6, tape, media, cartridge
Well, its Tuesday, and that means more IBM announcements!!!
Let's do a quick recap of what was announced for storage:
- Disk Systems
We now support 1000GB SATA-II drives in the DS4000 series. This is available for the DS4200 model 7V, DS4700, DS4800 as well as the expansion drawers EXP420 and EX810. When I asked our marketing team why we weren't going to say "1TB" like everyone else, they thought 1000GB sounds bigger. I guess I should not have asked that on April Fool's day. For more details, see the IBM press releases for the [DS4200/EXP420and DS4700/DS4800/EXP810].
- Tape Systems
IBM announced new machine code Release 1.4a for the The IBM Virtualization Engine™ TS7700 virtual tape library for our System z mainframe customers.Various features come with this new level of machine code. See the IBM [Press Release] for more details.
- Load balancing across the grid
- Host control over the copy of logical volumes on a cluster by cluster basis
- Option to gracefully remove an individual cluster from an existing grid
- Initial-state reset for TS7700 database for cluster cleanup
- Option to upgrade single-cache to dual-cache configuration
Also announced were updates to the 7214 model 1U2. Technically this is not in the IBM System Storage product line,but instead is designed specifically for our System p server line. This is a "media drawer" that allows you to havetape on one side, and optical on the other, in a single enclosure. IBM announced that you can now have DAT160 80GBdrives that is read-write compatible with DAT72 and DDS4 drives, and half-high LTO-4 drives that can read LTO-2 media, and is read-write compatible with LTO-3 media.Read the IBM [Press Release] for details.
Finally, if you are in the United States, Canada or the Carribean, there is a special discount promotionfor tape libraries purchased before June 20, 2008. This includes IBM TS3100, TS3200, TS3310 and TS3500 libraries.See the [Promotion Details] for eligibility.
- Storage Software
IBM has added capability to the IBM TotalStorage Productivity Center for Replication. A quick review of the differentoptions for this component.
- base Replication (uni-directional from primary to disaster site)
- Two-site replication (bi-directional, including failover and failback)
- Three-site replication (site awareness for all the copy sessions between all three sites in all situations)
Productivity Center for Replication supported all these levels for DS8000, DS6000 and ESS 800 disk models, butfor SVC it only supported FlashCopy and Metro Mirror for the uni-directional base. IBM announced version 3.4 today that has added support for SVC for Global Mirror (asynchronous disk mirroring) and bi-directional failover/failback. This supports lets you have "practice volumes" that allow IT managers to perform "disaster recovery exercises" without disrupting production workloads.
Also, for the DS8000, there is support for the new Space Efficient FlashCopy and DynamicVolume Expansion features. Here is the IBM
The Productivity Center for Replication server can run on either a Windows/Linux-x86 server or a z/OS mainframe server.The Productivity Center for Replication on System z offers all the same new support for SVC and DS8000, as well asincorporated Basic HyperSwap capability that I mentioned in my post last February[DS8000 Enhancements for the IBM System z10 EC].
Here are the IBM press releases for the TotalStorage Productivity Center for Replication on[Windows/Linux-x86and System z] servers.
I'm at a Business Partner conference today, discussing these announcements and other topics, so need to go back to those festivities.
technorati tags: IBM, SATA, SATA-II, 1000GB, 1TB, DS4000, DS4200, DS4700, DS4800, EXP420, EXP810, TS7700, TS7740, R1.4a, grid, cluster, 7214-1U2, DAT160, DAT72, DDS4, LTO-2, LTO-3, LTO-4, TS3100, TS3200, TS3310, TS3500, discount, promotion, Productivity Center, Replication, two-site, three-site, failover, failback, SVC, DS8000, DS6000, ESS800, Windows, Linux, z/OS, System z, z10 EC
Well it's Tuesday, which means its time to look at recent announcements.While I was on vacation last week, IBM made a lot of storage announcements October 23.Josh Krischer gives his summary on WikiBon [October 2007 Review
].Austin Modine of the The Register
went so far as to say that [IBM goes crazy with storage system updates
- IBM System Storage DS8000 series
This is "Release 3" software/microcode upgrades on our existing "Turbo" hardware.
- IBM FlashCopy SE -- Here "SE" stands for Space Efficient. Rather than allocating a full 100% of the space for the FlashCopy destination, you can set aside just a fraction, and this will hold all the changed blocks, similar to whatIBM already offers on the DS4000 series.
- Dynamic Volume Expansion -- In the past, if you needed more space for a LUN, you had to carve out a newer one elsewhere, and then copy the data over from the old to the new, leaving the old LUN around to be re-used or leftstranded. With this enhancement, you can just upgrade the LUN in place, making it bigger as needed, similar to whatIBM already offers on the DS4000 series and SAN Volume Controller. This applies to CKD volumes for the System zmainframe users out there as well.
- Storage Pool Striping -- striping volumes across RAID ranks to eliminate or reduce hot-spots, and provide betterload balancing. Many used SAN Volume Controller in front of the DS8000 to do this, but now you can do it natively inthe DS8000 itself.
- z/OS Global Mirror Multiple Reader -- for System z customers, "z/OS Global Mirror" is the new name for XRC. Thisenhancement improves the throughput of sending updates to the remote disaster recovery location.
- DS Storage Manager enhancements, the element manager software has been enhanced, and is pre-installed on the new IBM System Storage Productivity Center, which I will talk about below.
- Intermix of DS8000 machine types -- this is especially useful to allow new frames to have co-terminating warrantieswith the base units. In other words, as you expand your system, you can ensure that the entire chunk of iron runs outof warranty all at the same time, to simplify your decision making process to upgrade or contract for extended service.
See the [DS8000 Announcement Letter] for more details.
- IBM System Storage SAN Volume Controller 4.2.1
BarryW summarizes the updates in the[Announced SVC 4.2.1] release.If you have problems with the link he provides in his post, here is the [SVC 4.2.1 Announcement Letter].
- IBM System Storage Productivity Center
One of the biggest complaints about IBM TotalStorage Productivity Center is that it is software that needs to beinstalled on its own server, and that this installation process can take a day or two. Why wait? Now you can havea hardware console that has the DS8000 Storage Manager software, SVC Admin Console software, and IBM TotalStorageProductivity Center "Basic Edition" pre-installed. Here are the key features.
- Pre-installed and tested console
- DS8000 R3 GUI integration
- Cohabitation of SVC 4.2.1 GUI and CIMOM
- Automated device discovery
- Asset and capacity reporting, including tape library support
- Device configuration
- Advanced topology viewer
See the[System Storage Productivity Center - Announcement letter] for more details."Basic Edition" can be upgraded to "Standard Edition" to get full functionality.
- IBM System Storage N series
Our "Release 9" applies across the board, from N3000 to N5000 to N7000 series models, includingnew host bus adapters, and the new Data OnTAP 7.2.4 release level.
The Virtual File Manager (VFM) was announced as one of our latest [Storage Virtualization Solutions]. VFMprovides a global namespace that aggregates the file systems from Linux, UNIX, and Windows file servers, as well asN series storage, into a consolidated environment.
See the [N series Announcement Letter] for more details.
- IBM TS7520 Virtualization Engine
IBM's virtual tape library (VTL) for the distributed systems platform, has been enhanced to provide:
- Up to 12TB of disk cache, using 750GB SATA disk.
- F05 Tape Frames installed as TS7520 base units through a 32 port fibre channel switch
- Support for LTO generation 4 tape drives, both as virtual tape drives and as physical tape drives within IBM automated tape libraries attached to the TS7520. This allows you to use Encryption capabilities of LTO4.
See the [TS7520 Announcement Letter] for more details.
- IBM System Storage DS6000 series
The latest 300GB 15K RPM drives are now supported.
- IBM System Storage DS4000 series
This was a software/microcode upgrade release for the DS4000 series.
- RAID-6 support on the DS4700 Express models and the DS4200 Model 7V
- Support for greater than 2 TB volumes on selected supported operating systems
- 8K cache block size
- DS4000 Storage Manager v10.10 increases the number of FlashCopy tasks, remote mirror pairs, and storage partitions.
See the [DS4000 Announcement Letter] for more details.
- IBM System Storage DS3000 series
DS3000 series now supports SATA disk, and can be attached to AIX and Linux on System p servers. This appliesto the DS3200, DS3300 and DS3400 models.See the [DS3000 Announcement Letter] for more details.
- IBM System Storage TS2240
These are LTO4 Half-High drives, which can support encryption.See the [TS2240 Announcement Letter] for details.
Perhaps Austin is right, we might have gone crazy announcing all of this at once.
technorati tags: Josh Krischer, Austin Modine, IBM, DS8000, Turbo, FlashCopy, SE, space efficient, dynamic volume expansion, DVE, striping, z/OS Global Mirror, XRC, System Storage, Productivity Center, TotalStorage, Basic Edition, topology viewer, ONTAP, VFM, global namespace, TS7520, Virtualization Engine, virtual tape library, VTL, F05, SATA, LTO, LTO4, LTO-4, DS6000, DS4000, RAID6, RAID-6, AIX, Linux, System p, servers, TS2240, half-high, drives
Well, it is Tuesday, and that means IBM announcements. This week many of my colleagues are attending Storage Networking World [SNW
] conference. Normally, the most exciting announcements are reserved for the weeks these conferences are held, but IBM apparently made an exception this week.
- New Factory configurations for XIV
The first announcement is for new [factory configurations] for the IBM XIV disk system. In the past, you could only order a partial 6-module or a full 15-module rack. Today, IBM announced that there will also be 9-, 10-, 11-, 12-, 13- and 14-module configurations orderable as well.
Some FUD out in the blogosphere led some to believe that these partial configurations had to be made full 15 modules within 12 months. That is false. You can order any of these partial rack configurations and leave them as is until you need more capacity. There is no obligation to buy more capacity with these partial rack configurations.
- IBM N series N6060 configurations
This second announcement indicates that the N6060 supports[672 drives]. The N6060 is the latest midrange model of IBM N series unified storage.
If you are asking "What is a 672 drive?" don't feel stupid. It actuallyrefers to the number of external drives that can be attached to the N6060. Previously, it was mis-reported that the N6060 could support as many as 840 drives, but this was not correct, and this announcement is to fixthat typo.
- IBM Passport Advantage Sub-Capacity Licensing
This last announcement today relates to IBM Passport Advantage[sub-capacity licensing].Pricing products is always a challenge. You want to come up with a pricing methodology such that people who get the most use pay the most, and those who get less pay less, in a manner that everyone thinks is fair. With commodities, it is simple to price rice by the pound, or fabric by the yard, but what about IT solutions?
Some of the IBM software is based on number of processors used, so that people who have the software running on multiple machines, or machines with multiple cores, should pay more because they are getting more value. This makes sense if this software is the only thing running on that server, but today you can also have server virtualization and are running many guest operating systems, each with different applications. The solution is to use "sub-capacity" licensing. If you have a quad-core processor server, but have four guest operating systems using 25 percent of this, then each OS should only pay for one processor's worth of licensing. Since different processors have different clock speeds, IBM has standardized the calculations to a mythical "Processor Value Unit" or PVU, with a corresponding IBM License Metric Tool (ILMT).
Initially, this will cover specific versions of Citrix Xen Server, Microsoft Hyper-V and VMware, but IBM has made as a "statement of direction" that it will extend this sub-capacity licensing and ILMT support to IBM PowerVM capability for its POWER systems.
I have often heard clients complain that their third party software vendor does not support these hypervisors. Sometimes, this means the third party vendor will not fix or provide assistance if the problem occurs in this environment, and other times, it is that the pricing does not favor this environment, you get charged for all the processors, even if your slice of the processor is much smaller.
If you are at SNW this week, stop by and say "Hi" to my fellow IBM collegues for me.
technorati tags: IBM, SNW09, XIV, N6060, PVU, ILMT, Citrix, Xen, Hyper-V, VMware, ILMT
The proof-of-concept that IBM Haifa research center developed back in 1998 became what we now call the iSCSI protocol.The book iSCSI: The Universal Storage Connection
introduces the history as follows:
In the fall of 1999 IBM and Cisco met to discuss the possibility of combining their SCSI-over-TCP/IP efforts. After Cisco saw IBM's demonstration of SCSI over TCP/IP, the two companies agreed to develop a proposal that would be taken to the IETF for standardization.
There are three ways to introduce iSCSI into your data center:
- Through a gateway, like the IBM System Storage N series gateway, that allows iSCSI-based servers connect to FC-based storage devices
- Through a SAN switch or director, a FC-based server can access iSCSI-based storage, an iSCSI-based server accessing FC-based storage, or even iSCSI-based servers attaching to iSCSI-based storage.
- Directly through the storage controller.
IBM has been delivering the first method with its successful IBM System Storage N series gateway products, buttoday we have announced additional support for the second and third methods.Here's a quick recap.
- New SAN director blades
Supporting the second method, IBM TotalStorage SAN256B Director is enhanced to deliver iSCSI functionality with a new M48 iSCSI Blade, which includes 16 ports (8 Fibre Channel ports; and 8 Ethernet ports for iSCSI connectivity). We also announced a new Fibre Channel M48 Blade which provides 10 Gbps Fibre Channel Inter Switch Link (ISL) connectivity between SAN256B Directors.
- Entry Level Disk Systems
Supporting the third method, IBM introduces new iSCSI-capabable disk systems, including the IBM System Storage DS3300 model using SAS drives, N3300 A10/A20 models and N3600 A10/A20 models supporting use of FC and SATA drives.The DS3000 Express models include frequently requested options, including appropriate host bus adapters (HBA) and cables. Likewise, we have announced hardware features for our IBM N series , such as TCP offload engine (TOE) network interface cards (NIC), HBA and cables.
With support for Boot-over-iSCSI, diskless rack-optimized and blade servers can boot Windows or Linux over Ethernet,eliminating the management hassles with internal disk.
All of this is part of IBM's overall push into the Small and Medium size Business marketplace, making it easier to shop for and buy from IBM and its many IBM Business Partners, easier to deploy and install storage, and easier tomanage the storage once you have it.
technorati tags: IBM, Cisco, iSCSI, gateways, announcement, DS3300, N3300, N3600, A10, A20, SAS, FC, SATA, HBA, TOE, NIC, cables, SCSI, TCP, boot-over-iSCSI, SMB, Ethernet
It's Tuesday, which means IBM makes its announcements. We had several for the IBM System Storage product line. Here's a quick recap.
- Disk Systems
The IBM System Storage DS3000 now offers DC power models.New DC powered models of the DS3200, DS3400, and EXP3000 are well suited for Telco industry environments, as theseare NEBS and ETSI compliant and are powered by an industry standard 48 volt DC power source.
Also, the IBM System Storage N series now supports750GB SATA drives available for the EXN1000 drawer.
- Tape Systems
IBM Virtualization Engine TS7740now supports 3-cluster grids. Unlike 3-way replication on disk mirroring, such as IBM Metro/Global Mirror for the DS8000 that enforces a primary, secondary and tertiary copy, the grid implementation of TS7740 tape virtualization allows for any-to-any mirroring. Existing standalone TS7740 clusters can be converted to grid-enabled. A "Copy Export" feature allows virtual tapes to be exported onto physical tape. And in keeping with our theme of "enabling business flexibility", performance throughput can now be purchased in 100 MB/sec increments, up to 600 MB/sec, to match your workload bandwidth requirements.
The IBM System Storage TS1120drives installed in the IBM System Storage™ TS3400 Tape Library can now be attached to System z platforms using the IBM System Storage™ TS1120 Tape Controller. Before this, the TS3400 could only be attached to UNIX, Windows and Linux systems.
The IBM System StorageTS2230 Express is offered as an external stand-alone or rack-mountable unit. This model incorporates the new LTO IBM Ultrium 3 Serial Attached SCSI (SAS) Half-High Tape Drive, and a 3 Gbps single port SAS interface for a connection to a wide spectrum of distributed system servers that support Microsoft Windows and Linux systems.
- Storage Networking
IBM has added theCisco MDS 9124 for IBM System Storageentry-level fabric switch as an Express offering and part of the IBM Express Advantage Program. Express offerings are specifically created for mid-market companies and are well suited for workgroup storage applications like e-mail serving, collaborative databases and web serving. They bring enterprise-class performance, scalability and features to small and medium-sized companies and are easy to use, highly scalable, and cost-effective.This will make it easier for IBM Business Partners to provide fabric switch connectivity for:
- Storage consolidation solutions with IBM System Storage™ DS4000 Express disk arrays, especially the DS4700 Express.
- Backup / restore solutions with IBM System Storage™ TS3000 Tape Libraries, such as the TS3200.
- Archive and Retention
Ordering large configurations of the IBM System Storage Grid Access Manager just got a lot easier.New features enable configurations greater than 500 TB to be submitted as a single order. No change in the actualproduct, just an improvement in the ordering process.
For System p and System i servers, the IBM 3996 Optical library now supports Gen 2 60GB optical cartridges. These can be read/write or WORM cartridges.
I'm off to Denver, Colorado this week. I hope it is cooler there than it is down here in Tucson, Arizona.
technorati tags: IBM, disk, system, storage, SAS, FC, DS3000, DS3200, DS3400, EXP3000, NAS, EXN1000, tape, virtualization, library, TS7740, grid, Copy Export, throughput, TS3400, TS3200, mainframe, LTO, Ultrium, Cisco, MDS, 9124, Express, Advantage, DS4000, DS4700, TS3200, GAM, Grid Archive Manager, 3996, optical, WORM, Denver, Colorado, Tucson, Arizona, announcements
Yesterday (September 7, 2006) the Eclipse Foundation
announced that it has approved the creation of the Aperi Storage Management Framework Project.
There's been a lot of confusion out there about Aperi, so I thought I would post some facts and opinions about this exciting new project. A few years ago, I was thelead architect for IBM TotalStorage Productivity Center, IBM's infrastructure management product that helped launch the creation of Aperi.
From the latin word for "open", Aperi is an open source project that aims to simplify the management of storage environments, using the Storage Management Initiative - Specification (SMI-S) open standardto promote interoperability and eliminate complexity in today’s storage environments.
Aperi should provide immediate value upon install with basic storage management capabilities, rather than just simply a collection of components that require costly integration. We've discussed requirements for functions such as:
- Resource discovery, monitoring, and reporting
- Fabric Topology mapping
- Event management
- Disk / Tape management
- Device configuration & LUN assignment
- SAN fabric management
- Basic asset management
- User Interface
The big confusion most people have is Aperi's relation to SMI-S and the Storage Networking Industry Association (SNIA)open standards group. The best way to explain this is to go backto your High School SAT college-entrance exams. Remember questions like this?
CRUMB : BREAD ::
(A) splinter : wood
(B) water : bucket
(C) cream : butter
(The answer: a crumb is to bread like a splinter is to wood.)
Aperi is an implementation of SMI-S standard, similar to MySQL or PostgreSQL areopen standard relational database implementations of Structured Query Language (SQL).These compete with proprietary database implementations such as IBM DB2 Universal Database,Oracle Database, Microsoft SQL Server, or Sybase.
Aperi: SMI-S ::
PostgreSQL : Structured Query Language (SQL)
It is often the case that the folks writing the code are different than the folks defining the standards. This is the case between the members of Aperi writing code, and the members of the SNIA writing standards. IBM happens tohave employees writing Aperi code, and other employees helping define SMI-S standards.What can I say, IBM is a big company and a leader in many areas.
A good analogyis how the Apache community has developed an awesome web server, and the Firefox Mozillacommunity have developed an awesome web browser, both of which are implementations of the HTTP/HTML standards adopted by the World Wide Web Consortium. Apache and Firefoxcompete with proprietary implementations, such as Microsoft Internet Information Services(IIS) web server and Internet Explorer web browser.
Aperi: SNIA ::
Apache : World Wide Web (WWW) Consortium
With this arrangement, Aperi and the SNIA will have very complementary roles in defining and driving standards across the entire storage market. To that end, Aperi will make extensive use of the SNIA’s Technology Center and SNIA’s “plugfests” to test the interoperability of the Aperi framework with the variety of 3rd-party storage offerings available. By providing a tested implementation of SMI-S, Aperi will drive broader industry availability of SMI-S, as well as offer the many benefits of an industry-backed open source community.
Check out this vote of confidence:
"Eclipse's Aperi Project will further advance the adoption of SNIA's SMI-S, benefiting the entire storage industry and IT community. Furthermore, the SNIA and Aperi will define plans to collaborate on new storage standards, standards testing programs, and storage interoperability programs."
--- Wayne M. Adams, chair, SNIA Board of directors
So, both proprietary and open source implementations have their place in the world.Proprietary products are needed for advanced, unique value-add, and opensource projects are for basic support focused on interoperability and flexibility.These can be combined, for example, proprietary "plug-ins" built on an open source base. The more choices the client has, the better.
Storage vendors benefit too. Vendors are tired of being in the "Y.A.C." business, building "Yet Another Configurator" for each new device developed, with basic functionsto carve LUNs, read performance stats, and so on. By shipping Aperi instead, storagevendors like IBM can invest their development dollars in real innovations, things thatmatter for the customer.
If you are unfamiliar withopen source, I highly recommend Eric Raymond's bookThe Cathedral and the Bazaar. It might just change the way you think aboutopen source usage in the workplace.
technorati tags: Eclipse, Aperi, IBM, TotalStorage, Productivity Center, open, storage management, Eric Raymond, open+source, SMI-S, SNIA, Cathedral, Bazaar
It's Tuesday, which means IBM announcements, and today IBM made some major announcementsthat support a [Dynamic Infrastructure
]! I hinted at this yesterday, choosing the week's theme to be all about Cloud Computing and Alternative Sourcing. I will briefly highlight today's announcements related to storage here, and try to go into more detail over the next few weeks.
- Ethernet switches and routers
In support of Cloud Computing and Cloud Storage, IBM is now back in theEthernet networking business. This is part of storage as protocols likeiSCSI, CIFS and NFS are gaining prominence. Extending IBM's existing OEMrelationship with Brocade, there are four series:
- [c-series] - "c" for Compact, these are 1U high fixed port switches
- [g-series] - "g" for Pay-as-you-Grow using IronStack stacking technology to allow up to 8 switches to be
glommed, glued, er.. "gathered" together as a single virtual chassis.
- [m-series] - "m" for Multiprotocol Label Switching [MPLS] which supports routing between LAN and WAN networks over OC12 and OC48 lines.
- [s-series] - "s" for slots, the B08S has eight slots, and the B16S has sixteen slots, supporting up to 384 ports. These models support Power-over-Ethernet [PoE] that simplifies attaching Voice-over-IP (VoIP) telephones and IP-based surveillance cameras.
IBM announced it will strengthen its partnership with Juniper Networks, and continues to consider Cisco a strategic partner as well. To help customer position themselves for Cloud Computing and Cloud Storage,IBM also launches some new services:
- IBM System Storage DS5000 disk system
The IBM [DS5000] now supports self-encrypting disk drives, known also as "full-disk encryption" or FDE, for added security, and 8Gbps Fibre Channel (FC) ports for added performance. The DS5300 model in particular now supports up to 448 disk drives for added scalability.
- Comprehensive Data Protection Solution
IBM's [Data Protection Solution] shows off IBM's awesome synergy between servers, storage and software. Combining System x servers, Tivoli Storage Manager FastBack software, and DS5000, DS4000 or DS3000 series disk systems. The solution is designed to both Windows-based servers and their applications, offering bare metal restores, and application–level protection for Oracle, SQL, Exchange and SAP.
- Tivoli Storage Productivity Center
Last February, IBM previewed the renaming of TotalStorage Productivity Center to its new name,Tivoli Storage Productivity Center. Today, IBM announces [Tivoli Storage Productivity Center v4.1]. Some key changes include:
- Productivity Center for Fabric has been merged into Productivity Center for Disk
- Productivity Center for Replication is now integrated, but remains separately licensed
- Productivity Center can now feed input to IBM's Novus Storage Enterprise Resource Planner [SERP]
- TS7650 ProtecTIER Data Deduplication IP-based replication
IBM previews IP-based replication which allows the TS7650 appliance or TS7650G gateway to sendvirtual tape data over to a remote location. This is instead of having the underlying disk systemsperform the replication on its behalf. Having the TS7650 do the replication is preferred, as itcan maintain virtual cartridge integrity, when a virtual tape is unmounted the replication can beginat that point.
This is just a small subset of all the announcements. For more information, see this 28-pagepresentation [Manage the Explosion of Information with IBM Information Infrastructure].
technorati tags: IBM, Dynamic Infrastructure, Ethernet, switches, routers, Cloud Computing, Cloud Storage, Brocade, Juniper Networks, Cisco, IronStack, FCoE, FCoCEE, PoE, DS5000, FC, FDE, TSM, FastBack, TotalStorage, Tivoli, Storage, Productivity Center, Novus, SERP, TS7650, TS77650G, ProtecTIER, Information Infrastructure
For those who missed it, IBM announced last Tuesday encryption capability for the TS1120 drive, our enterprise tape drive that read and write 3592 cartridges. Do you need special cartridges for this? No! Use the sames ones you have already been using!
You can read more about it www.ibm.com/storage/tape.
technorati tags: IBM, tape, systems, 3592, cartridges, TS1120, drive, encryption
On August 8, Brocade announced its intent to acquire McData corporation. IBM will continue to sell both Brocade and McData networking gear, as the acquisition will not be finalized until January 2007.
Read more about it directly from brocade www.brocade.com
technorati tags: IBM, SAN, Brocade, McDATA, acquisition
Continuing this week's theme on Business Continuity, I will use this post to discuss this week'sIBM solid state disk announcement
.This new offering provides a new way to separate programs from data, to help minimizedowntime and outages normally associated with disk drive failures.
Until now, the method most people used to minimize the amount of data on internalstorage was to use disk-less servers with Boot-Over-SAN, however, not all operating systems, and not all disk systems, supported this.
In April, the BladeCenter HS21 XM blade server introduced the option to have oneIBM 4GB Flash Memory Device that used the USB2.0 protocol. The 4GB drive can be usedto boot 32-bit and 64-bit versions of Linux, such as Red Hat Enterprise Linux (RHEL) and SUSE Linux Enterprise Server (SLES)), but not Windows. Linux is incredibly small operating system. You can bootversions from a USB key/thumbdrive (64MB) or CD (700MB) image, so it makes sense that a 4GB flash drive based on USB protocol was a good fit for Linux.
Windows, however, is not supported, because of the small 4GB size and USB protocol limitations. For Windows, you would add a SAS drive, you boot from this hard drive, and use the 4GB Flash drive for data only.
So what's new this time? Here's a quick recap of July 17 announcement. For the IBM BladeCenter HS21 XM blade servers, new models of internal "disk" storage:
- Single drive model
A single 15.8GB solid-state disk drive, based on SATA protocol. In addition to theLinux operating systems mentioned above, the capacity and SATA protocols allowsyou to boot 32-bit and 64-bit versions of Windows 2003 Server R2, with plans in placeto other platforms in the future, such as VMware. I am able to run my laptop Windows with only 15GB of C: drive, separating my data to a separate D: partition, so this appears to be a reasonable size.
- Dual drive model
The dual drive fits in the space of a single 2.5-inch HDD drive bay.You can combine these in either RAID 0 or RAID 1 mode.
- RAID 0 gives you a total of 31.6GB, but is riskier. If you lose either drive,you lose all your data. Michael Horowitz of Cnet covers the risks of RAID zerohere andhere.However, if you are just storing your operating system and application, easily re-loadable from CD or DVD in the case of loss, then perhaps that is a reasonable risk/benefit trade-off.
- RAID 1 keeps the capacity at 15.8GB, but provides added protection. If you loseeither drive, the server keeps running on the surviving drive, allowing you to schedule repair actions when convenient and appropriate. This would be the configuration I would recommend for most applications.
Until recently, solid state storage was available at a price premium only. Flash prices have dropped 50% annually while capacities have doubled. This trend is expected to continue through 2009.
According to recent studies from Google and Carnegie Mellon, hard drives fail more oftenthan expected. By one account, conventional hard disk drives internal to the server account for as much as 20-50% of component replacements.IBM analysis indicates that the replacement rate of a solid state drive on a typical blade server configuration is only about 1% per year, vs. 3% or more mentionedin the these studies for traditional disk drives.
Flash drives use non-volatile memory instead of moving parts, so less likely to break down during high external environmental stress conditions, like vibration and shock, or extreme temperature ranges (-0C° to +70°C) that would make traditional hard disks prone to failure.This is especially important for our telecommunications clients, who are always looking for solutions that are NEBS Level 3 compliant.
Last year, I mentioned that flash drives could provide only a limited number of write and erase cycles, but today's new advances in wear-leveling algorithms have nearly eliminated this limitation.
As with any SATA drive, performance depends on workload.Solid state drives perform best as OS boot devices, taking only a few secondslonger to boot an OS than from a traditional 73GB SAS drive. Flash drives also excel in applications featuring random read workloads, such as web servers. For random and sequential write workloads, use SAS drives instead for higher levels of performance.
Part of IBM's Project Big Green, these flash drives are very energy efficient. Thanks to sophisticated power management software, the power requirement of the solid state drive can be 95 percent better than that of a traditional 73GB hard disk drive. These 15.8GB drives use only 2W per drive versus as much as 10W per 2.5” hard drive and 16W per 3.5” hard drive. The resulting power savings can be up to 1,512 watts per server rack, with 50% heat reduction.
So, even though this is not part of the System Storage product line, I am very excitedfor IBM. To find out if this will work in your environment, go to the IBM Server Provenwebsite that lists compatability with hardware, applications and middleware, or review the latest Configuration and Options Guide (COG).
technorati tags: IBM, Business, Continuity, solid, state, flash, disk, drive, announcement, blade, server, BladeCenter, H21, XM, 4GB, Flash, Memory, Device, USB2.0, Linux, RedHat, RHEL, Novell, SUSE, SLES, Windows, Project, Big Green, SATA, SAS, energy, efficient, efficiency, performance, NEBS, telecommunications, boot-over-SAN, Google, Carnegie Mellon, study, Vmware
It's Tuesday, and you know what that means-- IBM makes its announcements.
Today, IBM announced a variety of storage offerings, but I am going to just focus this poston just the new DR550 models. The DR550 is the leading disk-and-tape solution forstoring non-erasable, non-rewriteable (NENR) data. This type of data, often called fixed-contentor compliance data, was previously writtento Write-Once-Read-Only (WORM) optical media. However, Optical technology has not advanced as fastas magnetic recording, so disk and tape have taken over this role. While there are still a fewlaws on the books that mandate "optical media" as the storage solution, new laws like SEC 17a-4and Sarbanes-Oxley (SOX) allow for NENR solutions based on magnetic disk or tape instead.
As we had done for the IBM SAN Volume Controller (SVC), the DR550 was based on "off the shelf"components. The File System Gateway (FSG) was based on System x server, the DR550 hardwarebased on System p server and DS4000 disk arrays, with "hardened" versions of the AIX,DS4000 Storage Manager and IBM Tivoli Storage Manager (TSM) that we renamed the IBM SystemStorage Archive Manager (SSAM).
The DR550 is Ethernet-based, so it can be used with all IBM server platforms, from System xand BladeCenter, to System i, and System p, and even System z mainframe customers, as wellas non-IBM platforms from Sun, HP and others. There are two ways to get data stored ontothe DR550:
- Sending archive objects via the SSAM archive API. This is an API based on the XBSA open standardthat many applications have coded to.
- Writing files via standard CIFS and NFS protocols through the File System Gateway (FSG), an optional priced feature that you can have incorporated into the DR550.
Generally, business applications like SAP or Microsoft Exchange don't do this directly, but ratheryou have an "archive management application" that acts as the go-between broker. IBM offers IBM Content Manager, IBM CommonStore for eMail (Exchange and Lotus Domino), and IBM CommonStore for SAP.IBM also recently acquired FileNet and Princeton Softech that provide additional support. Third partyproducts like Zantaz and Symantec KVS Enterprise Vault have also passed System Storage Provencertification for the DR550. These go-between applications understand the underlying storagestructure of their respective applications, and can apply policies to extract database rows, individualemails, or other attachments, as appropriate, and either move or copy them into the DR550.
The DR550 has built in support to move data from disk to tape, through policy-based automation behind the scenes. This is the key differentiator fromdisk-only solutions. Rather than filling up an EMC Centera, and watching it sit there idle burning energyfor five to seven years, or however long you are required to keep the data, you can instead use the disk for the most recent months worth of data on a DR550. The DR550 attaches to tapedrives or libraries, not just IBM TS1120 or LTO based models, but hundreds of systems from other vendorsas well. You can combine this with either rewriteable or WORM tape cartridge media, depending on yourcircumstances. This can be directly cabled, or through a SAN fabric environment. Storing the bulk ofthis rarely-referenced data on tape makes the DR550 substantially more affordable and more green thandisk-only alternatives.
Let's take a look at the specific models:
- IBM System Storage DR550 DR1
The DR1 machine-type-model replaces the "DR550 Express" for small and medium size business workloads. This is a singleSystem p server with anywhere from 1 to 36 TB of raw disk capacity in a nice lockable 25U cabinet (see picture at left). On the original DR550 Express, the 25U cabinet was optional, but so many people opted for it, that wemade it standard feature. You can add the File System Gateway, which is a System x running Linuxwith NFS and CIFS protocols converted to SSAM API calls.
- IBM System Storage DR550 DR2
The DR2 machine-type-model replaces the larger "DR550" for enterprise workloads. This can be either a single or dual node System p configuration, anywhere from 6 to 168 TB in raw disk capacity, in a lockable 36U cabinet. This also allows for an optional File System Gateway, and in the case of thedual node configuration, you can have two System p servers, and two System x servers with two Ethernetand two SAN switches for complete redundancy.
Common Information Model (CIM) and SMI-S interfaces have been added so that IBM Director can providea "single pane of glass" to manage all of the components of the DR550.
The system is based on high-capacity 750GB SATA drives, installed in half-drawer (eight drives, 6 TB)and full-drawer (16 drives, 12 TB) increments. Your choices will be 7+P RAID5 or 6+P+Q RAID6.Here is an Intel article that explains [RAID6 P+Q].In the future, as new disk technologies are introduced, the DR550 supports moving the disk datafrom old to new seamlessly, without disrupting the data retention policies enforcement.
For more information, here is a [6-page brochure] thathas specifications for both the DR1 and DR2 models.
Previous posts about the DR550: [DR550 File System Gateway | What happened to CAS? | Optimizing Data Retention and Archiving | Blocks, Files and Content-Addressable Storage | Dilemma over future storage formats | Storage Predictions for 2007]
I'll cover some of the other announcements in later posts this week. If you can't wait, you can go read the[IBM Press Release].
technorati tags: IBM, DR550, Express, DR1, DR2, SSAM, TSM, FSG, NFS, CIFS, NENR, WORM, fixed-content, compliance, SEC, SOX, SVC, XBSA, API, SAP, CommonStore, Microsoft Exchange, Lotus Domino, FileNet, Princeton Softech, Zantaz, EnterpriseVault, EMC, Centera, AIX, Linux, cabinet, RAID5, SATA, RAID6, P+Q, CAS
On Tuesday, I covered much of the Feb 26 announcements, but left the IBM System Storage DS8000 for today so that it can haveits own special focus.
Many of the enhancements relate to z/OS Global Mirror, which we formerly called eXtended Remote Copy or "XRC", not to be confused with our "regular" Global Mirror that applies to all data. For those not familiar with z/OS Global Mirror, here is how it works. The production mainframe writes updates to the DS8000, and the DS8000 keeps track of these in cache until a "reader" can pull them over to the secondary location.The "reader" is called System Data Mover (SDM) which runs in its own address space under z/OS operating system. Thanks to some work my team did several years ago, z/OS Global Mirror was able to extend beyond z/OS volumes and include Linux on System z data. Linux on System z can use a "Compatible Disk Layout" (CDL) format (now the default) that meetsall the requirements to be included in the copy session.
IBM has over 300 deployments of z/OS Global Mirror, mostly banks, brokerages and insurance companies. The feature can keep tens of thousands of volumes in one big "consistency group" and asynchronously mirror them to any distance on the planet, with the secondary copy recovery point objective (RPO) only a few seconds behind the primary.
- Extended Distance FICON
Extended Distance FICON is an enhancement to the industry-standard FICON architecture (FC-SB-3) that can help avoid degradation of performance at extended distances by implementing a new protocol for "persistent" Information Unit (IU) pacing. This deals with the number of packets in flight between servers and storage separated by long distances, andcan keep a link fully utilized at 4Gpbs FICON up to 50 kilometers. This is particularly important for z/OS GlobalMirror "reader" System Data Mover (SDM). By having many "reads" in flight, this enhancementcan help reduce the need for spoofing or channel-extender equipment, or allow you to choose lower-costchannel extenders based on "frame-forwarding" technology. All of this helps reduce your total cost of ownership (TCO)for a complete end-to-end solution.
This feature will be available in March as a no-charge update to the DS8000 microcode.For more details, see the [IBM Press Release]
- z/OS Global Mirror process offload to zIIP processors
To understand this one, you need to understand the different "specialty engines" available on the System z.
On distributed systems where you run a single application on a single piece of server hardware, you mightpay "per server", "per processor" or lately "per core" for dual-core and quad-core processors. Software vendors were looking for a way to charge smaller companies less, and larger companies more. However, you might end up paying the same whether you use 1GHz Intelor 4GHz Intel processor, even though the latter can do four times more work per unit time.
The mainframe has a few processors for hundreds or thousands of business applications.In the beginning, all engines on a mainframe were general-purpose "Central Processor" or CP engines. Based on theircycle rate, IBM was able to publish the number of Million Instructions per Second (MIPS) that a machine witha given number of CP engines can do. With the introduction of side co-processors, this was changed to "Millionsof Service Units" or MSU. Software licensing can charge per MSU, and this allows applications running in aslittle as one percent of a processor to get appropriately charged.
One of the first specialty engines was the IFL, the "Integrated Facility for Linux". This was a CP designatedto only run z/VM and Linux on the mainframe. You could "buy" an IFL on your mainframe much cheaper than a CP,and none of your z/OS application software would count it in the MSU calculations because z/OS can't run on theIFL. This made it very practical to run new Linux workloads.
In 2004, IBM introduced "z Application Assist Processor" (zAAP) engines to run Java, and in 2006, the "z Integrated Information Processor" (zIIP) engines to run database and background data movement activities.By not having these counted in the MSU number for business applications, it greatly reduced the cost for mainframe software.
Tuesday's announcement is that the SDM "reader" will now run in a zIIP engine, reducing the costs for applicationsthat run on that machine. Note that the CP, IFL, zAAP and zIIP engines are all identical cores. The z10 EC hasup to 64 of these (16 quad-core) and you can designate any core as any of these engine types.
- Faster z/OS Global Mirror Incremental Resync
One way to set up a 3-site disaster recovery protection is to have your production synchronously mirrored to a second site nearby, and at the same time asynchronously mirrored to a remote location. On the System z,you can have site "A" using synchronous IBM System Storage Metro Mirror over to nearby site "B", and alsohave site "A" sending data over to size "C" using z/OS Global Mirror. This is called "Metro z/OS Global Mirror"or "MzGM" for short.
In the past, if the disk in site A failed, you would switch over to site B, and then send all the data all over again. This is because site B was not tracking what the SDM reader had or had not yet processed.With Tuesday's announcement, IBM has developed an "incremental resync" where site B figures out what theincremental delta is to connect to the z/OS Global Mirror at site "C", and this is 95% faster than sendingall the data over.
- IBM Basic HyperSwap for z/OS
What if you are sending all of your data from one location to another, and one disk system fails? Do you declare a disaster and switch over entirely? With HyperSwap, you only switch over the disk systems, but leave therest of the servers alone. In the past, this involved hiring IBM Global Technology Services to implementa Geographically Dispersed Parallel Sysplex (GDPS) with software that monitors the situation and updates thez/OS operating system when a HyperSwap had occurred. All application I/O that were writing to the primary locationare automatically re-routed to the disks at the secondary location. HyperSwap can do this for all the disk systems involved,allowing applications at the primary location to continue running uninterrupted.
HyperSwap is a very popular feature, but not everyone has implemented the advanced GDPS capabilities.To address this, IBM now offers "Basic HyperSwap", which is actually going to be shipped as IBMTotalStorage Productivity Center for Replication Basic Edition for System z. This will run in a z/OSaddress space, and use either the DB2 RDBMS you already have, or provide you Apache Derby database for thosefew out there who don't have DB2 on their mainframe already.
Update: There has been some confusion on this last point, so let me explain the keydifferences between the different levels of service:
- Basic HyperSwap: single-site high availability for the disk systems only
- GDPS/PPRC HyperSwap Manager: single- or multi-site high availability for the disk systems, plus some entry-level disaster recovery capability
- GDPS/PPRC: highly automated end-to-end disaster recovery solution for servers, storage and networks
I apologize to all my colleagues who thought I implied that Basic HyperSwap was a full replacement for the morefull-function GDPS service offerings.
- Extended Address Volumes (EAV)
Up until now, the largest volume you could have was only 54 GB in size, and many customers still are using 3 GB and 9 GB volume sizes. Now, IBM will introduce 223 GB volumes. You can have any kind of data set on these volumes,but only VSAM data sets can reside on cylinders beyond the first 65,280. That is because many applications still thinkthat 65,280 is the largest cylinder number you can have.
This is important because a mainframe, or a set of mainframes clustered together, can only have about 60,000disk volumes total. The 60,000 is actually the Unit Control Block (UCB) limit, and besides disk volumes, youcan have "virtual" PAVs that serve as an alias to existing volumes to provide concurrent access.
Aside from the first item, the Extended Distance FICON, the other enhancements are "preview announcements" which means that IBM has not yet worked out the final details of price, packaging or delivery date. In many cases, the work is done, has been tested in our labs, or running beta in select client locations, but for completeness I am required to make the following disclaimer:
All statements regarding IBM's plans, directions, and intent are subject to change or withdrawal without notice. Availability, prices, ordering information, and terms and conditions will be provided when the product is announced for general availability.
technorati tags: IBM, z10 EC, DS8000, z/OS Global Mirror, XRC, SDM, CDL, RPO, FICON, dual-core, quad-core, Intel, MIPS, MSU, zAAP, IFL, zIIP, Hyperswap, DB2, Apache, Derby, UCB, VSAM, EAV
Continuing my two-part series on this week's announcements, I presentIBM's latest for tape and storage software.
- IBM TS7650 and TS7650G ProtecTIER deduplication
In addition to the [TS7650G gateway model] new [Enterprise Edition V2 software], IBM announced four new [TS7650 appliance models] for a complete, integrated solution. The fourconfigurations include the controller and disk:
- 7TB, single controller
- 18TB, single controller
- 36TB, single controller
- 36TB, dual controller in clustered configuration
These disk capacities can have up to 25x times their effective capacity with IBM's HyperFactorin-line deduplication capability. So the smallest 7TB model could be as effective as 175TB of traditionaldisk storage.
- IBM Tivoli Storage Manager (TSM) v6
After years and years in development, IBM announces[TSM v6]. Here's a quick summary of the key features:
- DB2 instead of an internal database
For years, people have complained that IBM used its own internal relational database. This was becausewhen TSM was first launched back in 1993, the DB2 did not have all the features on all of the various server platforms that TSM needed. Today, DB2is the leading relational database on all the key platforms that TSM server runs on, and therefore good enough for use within Tivoli Storage Manager. If you don't already have DB2, it is included for use with TSM v6.1 at no additional charge. Do you have to become a DB2 expert to use TSM? No! The TSM administration commands have been updated to hide all the complexity of DB2 away, behind the scenes. You now just use TSM commands to administer the database,as you did before. IBM will provide conversion utilities to help existing TSM customers migrate to thisnew database environment.
- Better Operational Reporting
Another big complaint was that TSM had fixed reporting, and administrators that wanted customized reportsoften had to resort to purchasing third party products. With the change over to DB2, TSM now enables youto create your own reports using Eclipse's Business Intelligence and Reporting Tools[BIRT]! If you haven't used BIRT, you can downloada free open source copy and start playing around with its capabilities. This is combined with a revamped GUI that provides a customizable dashboard using IBM's Integrated Solutions Console (ISC)infrastructure.
- Software-based Deduplication
Lastly, IBM has incorporated deduplication capability within the TSM v6.1 software for its own diskstorage pools. This is done in a post-process manner so as to dedupe all of your legacy backup dataas well, not just the new stuff, without impacting the current TSM server performance.
At this point, you might be thinking "Wait, what about IBM TS7650 ProtecTIER deduplication?" which is really two questions.
- Can I use TSM v6.1 with IBM TS7650 ProtecTIER?
Yes, however since TSM progressive incremental method is vastly more efficientthan other backup products like Veritas NetBackup or EMC Legato NetWorker, the TS7650 may only get 10x reductionof TSM backups, versus up to 25x with full-backups-every-night backup schemes. TSM only dedupes itsdisk storage pools, so it won't dedupe data directed at tape systems like the TS7650 or othertape libraries. This avoids the "double dedupe" concern.
- When should I use TSM's software version versus TS7650's hardware deduplication?
This is a positioning question. For now, the cut-over point is about 10TB per night backup processing. If youbackup more than 10TB per night, TS7650 hardware may be the better approach. If you are a smaller customer nowhere near that volume of data, then using TSM v6.1 software deduplication may be a morecost-effective solution. If you start small, and grow beyond 10TB per night, it is easy to bring ina TS7650 into an existing TSM environment and migrate the data over.
- Sub-capacity Licensing
If you run TSM server on a logical partition (LPAR) or virtual guest OS under VMware ESX, Xen or Microsoft'sHyper-V environment, why should you have to license it for the whole box? With TSM v6.1, you nowcan pay for only the amount of processors you use, down to a single core even.If you currently run TSM v5 on z/OS, you can migrate over to TSM v6.1 server for Linux on System z totake advantage of cost savings using IFL engines.
- IBM Tivoli Key Lifecycle Manager (TKLM) v1.0
Don't let the "v1.0" scare you, this is the successor to IBM's Encryption Key Manager (EKM) that hasthousands of clients using today with IBM encrypting tape drives. The new TKLM adds support for full disk encryption (FDE) drives--like those for the DS8000 I mentioned in [yesterday's post]--as well as new features to support key rotation for compliance and business controls.
- IBM Tivoli Storage Productivity Center
Last, but not least, we have IBM Tivoli Storage Productivity Center [TSPC]. No, that is not a typo. IBM is renaming IBM TotalStorage Productivity Center to Tivoli Storage Productivity Center toavoid trademark conflicts with the [Professional Golfer's Association].
This is not just renaming existing product. Here some key improvements:
- TSPC brings back together Productivity Center Standard Edition (Disk, Tape, SAN and Data) with Productivity Center for Replication, which were separate at birth a few years ago.
- TSPC adds support for IBM's Storage Enterprise Resource Planner[SERP] from theNovusCG acquisition.
- End-to-end view for EMC storage devices connected to supported servers via EMC Powerpath multipathing driver. As customers switch away from EMC Control Center over to IBM's Productivity Center, IBM can continue to provide support for existing EMC gear.
Of course, IBM will still offer IBM System Storage Productivity Center[SSPC] which is a piece of hardware pre-installed with Productivity Center software.
Hopefully, you can now see why I had to split up all these announcements into separate posts acrossmultiple days!
technorati tags: IBM, TS7650, TS7650G, gateway, appliance, ProtecTIER, HyperFactor, TSM, DB2, BIRT, deduplication, Veritas, NetBackup, EMC, Legato Networker, LPAR, VMware, Xen, Hyper-V, z/OS, Linux, TKLM, TSPC, SSPC, Productivity Center
Well, it's Tuesday, so that means IBM announcements!
We had so much announced, that I will just cover the disk systems today, and deal with tape systems and software tomorrow.
- IBM System Storage DS8000 series
IBM continues to invest heavily in its strategic [DS8000 series].For [existing 2107 machines], IBM's new DS8000 microcode supports:
- 1 TB 7200 rpm Serial ATA (SATA) Disk Drives
Now that IBM XIV has proven that 1TB SATA are safe for high-end tier-1 enterprise class use, we extended DS8000 support to include SATA support also. DS8000 supports RAID-6 and RAID-10 for these.
- Intelligent Write Caching
IBM Research conducts extensive investigations into improved algorithms for cache management. Intelligent Write Caching boosts performance for both temporal and spatial locality.
- Remote Pair FlashCopy®
This allows you to FlashCopy volume A to volume B, with Volume B remotely mirrored to Volume C at a secondary location, via Metro Mirror. This allows you to have a consistent copy of your data at both locations.
For[newly ordered 242x models], you get all the features above, plus the following additional support:
- Full Disk Encryption (FDE)
IBM was the first in the industry to deliver tape-drive encryption, so it makes sense that IBM is also the first in the industry to deliver disk-drive encryption. These are 15K rpm drives in standard 146GB, 300GB and 450GB capacities. As with tape, encrypting at the disk device eliminates the huge overhead from server-based encryption methods.
- Solid State Drive (SSD)
You can also have Solid State Disk drives in your DS8000, in 73GB and 146GB capacities, protected by RAID-5.If you are wondering what data to put on these much-faster drives, IBM has taken the work and worry out by havingintelligence in DB2 to optimize what gets placed on SSD to get the most performance improvement.
- IBM System Storage XIV
Continuing the incredible marketplace excitement over its Cloud-Opimized Storage[XIV series], IBM now has announced[new capacity options]. The IBM XIV R2 that we announced last August 2008 was a fixed 15 module configuration. In thenew configurations, you can start with as little as six modules, representing a 40% partial rack of the originalfull model. Here is a table that shows the details:
|Total Modules|| 6 || 9 || 10 || 11 || 12 || 13 ||14 || 15|
| Useable Capacity (TB) ||27 || 43 || 50 || 54 || 61 || 66 || 73 || 79|
|Interface Modules ||3 || 6 || 6 || 6 || 6 || 6 || 6 || 6|
|Data Modules ||3 || 3 || 4 || 5 || 6 || 7 || 8 || 9|
|Disk Drives ||72 || 108 || 120 || 132 || 144 || 156 || 168 || 180|
|Fibre Channel Ports ||8 || 16 || 16 || 20 || 20 || 24 || 24 || 24|
|iSCSI Ports ||0 || 4 || 4 || 6 || 6 || 6 || 6 || 6|
|Cache Memory (GB) ||48 || 72 || 80 || 88 || 96 || 104 || 112 || 120|
- IBM System Storage N series
And last, but not least, we have two new models in IBM's[N6000 series].The [N6060]has model A12 (single controller) and model A22 (dual controller). These are disk-less controllers thatyou can configure in either appliance mode or gateway mode. In appliance mode, you can attachdisk drawers such as the EXN1000, EXN2000 or EXN4000. In gateway mode, you attach external disk systems, suchas the IBM DS8000 or XIV above.
Also, IBM introduces the new [2101 model N42 rack], which has the following features:
- It's ruggedized to handle earthquakes. IBM brings a feature that we've had for a while on other disk systems to the N series with a collection of bolts and anchors to secure the rack from physical tremors.
- It's instrumented for IBM Active Energy Manager, a component of IBM Systems Director. New iPDUs are designed to help measure and monitor energy management components. As companies get more concerned about thefate of the planet, monitoring energy consumption can help reduce carbon footprint.
I'll cover the rest of the announcements tomorrow!
technorati tags: IBM, DS8000, SATA, SSD, Encryption, SATA, RAID-5, RAID-6, RAID-10, FlashCopy, FDE, COS, XIV, N6060, EXN1000, EXN2000, EXN4000, N42, earthquakes, ruggedized, instrumented, iPDU, carbon footprint
Well, it's Tuesday again, and that means more IBM announcements!
Today, IBM announced the enhanced IBM System Storage DS3200 disk system.It is in our DS3000 series, the DS3200 is SAS-attach, DS3300 is iSCSI-attach, and DS3400 is FC-attach. All of them support up to 48 drives, which can be a mix of SAS and SATA drives.
The DS3200 supports the following operating environments (see IBM's [Interop Matrix] for details):
- Microsoft Windows
- Linux (both Linux-x86 and Linux on POWER)
- Sun Solaris
- Novell NetWare
With today's announcements, the DS3200 can be used to boot from, as well as contain data. This is ideal to combine with IBM BladeCenter. With the IBM BladeCenter you can have 14 blades, either x86 or POWER based processors, attached to a DS3200 via SAS switch modules in the back of the chassis.
Let's take an example of how this can be used for a Scale-Out File Services[SoFS] deployment.
First, we start with servers. We can have either three [IBM System x3650] servers, but this would use up all six of the direct-attach ports. Instead, we'll choose the [BladeCenter H chassis], with three HS21 blades for SoFS, and that leaves us with eleven empty blade slots we could put in a management node, or other blades to run applications.
- SAS connectivity modules
The IBM BladeCenter [SAS Connectivity Module] allows the blade servers to connect to a DS3200. Two of them fit right in the back of the BladeCenter chassis, providing full redundancy without consuming additional rack space.
- DS3200 and EXP3000 expansion drawers
We'll have one DS3200 controller with twelve internal drives, and three expansion EXP3000 drawers with twelve drives each, for a total of 48 drives. Using 1TB SATA, this would be 48 TB raw capacity.
The end result? You get a 48TB NAS scalable storage solution, supporting up to 7500 concurrent CIFS and NFS users, with up to 700 MB/sec with large block transfers. By using BladeCenter, you can expand performance by adding more blades to the Chassis, or have some blades running SAP or Oracle RAC have direct read/write access to the SoFS data.
Just another example on how IBM can bring together all the components of a solution to provide customer value!
technorati tags: IBM, DS3200, BladeCenter, Linux, AIX, Windows, Solaris, VMware, NetWare, POWER, SAS, EXP3000, SATA, CIFS, NFS, SoFS
In case you haven't noticed, IBM System Storage makes most of their announcements on Tuesdays. IBM announced a lot today, so here is a quick run-down.
- Cisco storage networking products
IBM continues to resell Cisco switches and directors, but now can offer these with a 1-year IBM warranty.
The entry-level Cisco 9124offers 8 to 24 ports. For IBM BladeCenter, IBM now offers the Cisco10-port and 20-port modules that slide into the back of the chassis, and are functionally equivalent to the 9124.The original BladeCenter came with a 16-port module with 14 internal, but only 2 external, which severely hamperedbandwidth connectivity to external storage. These new modules provide more external ports to relieve that constraint.
The midrange Cisco9200switches have two models, both with 16 fixed ports, with the option for a blade that can provide 12, 24 or 48 additional ports. The 9216A has 16 FCP ports, and the 9216i has 14 FCP ports, and 2 GbE ports to act as a router, such as toconnect to a remote location for business continuity using Metro Mirror or Global Mirror.
The enterprise-class Cisco 9500directors can support up to 528 ports.
- TS3400 Tape Library
The new TS3400library is a small entry-level size library, supporting the enterprise-class TS1120 drive, providing interoperabilitywith the larger tape libraries, with all the support for tape encryption.
In addition to Linux, Unix, and WIndows, the TS1120 can now be connected to System i servers. In the past, the only IBMtape available to System i were the LTO models. There are a lot of businesses that need to comply with government regulations that are looking for tape encryption, and now IBM has made it accessible to more clients.
- 300GB drives at 15K RPM
The DS8000 can now support new drives with 300GB capacity at 15,000 RPM (15K). These can be up to 30 percent faster than the 10,000 RPM drives for typical workloads.
IBM continues its market leadership with these new set of features and offerings!
technorati tags: IBM, SAN, Cisco, 9124, BladeCenter, warranty, 9200, 9216i, 9216A, 9500, TS3400, TS1120, LTO, DS8000, disk,tape,15K, RPM
|Today was a special day! IBM launched the world's first "Global Archive Solutions Center" in Guadalajara, Mexico.We had a formal "ribbon cutting", shown here were the following dignitaries (from left to right):|
- Eugenio Godard, IBM Guadalajara site level executive
- Andy Monshaw, IBM General Manager of IBM System Storage
- Cindy Grossman, IBM VP of Tape and Archive solutions
- Luis Guillermo Martinez Mora, Secretary of economic development for the state of Jalisco, Mexico
- José Décurnex, IBM General Manager for the country of Mexico
In the morning, we had a series of speeches from Cindy Grossman, Andy Monshaw, Eugenio Godard, and Federico Lepe (technology advisor for the governor for the state of Jalisco, Mexico).
|While the hordes of press journalists, analysts and clients were taking the lab tour, we took a snap of thefront entrance. The day was packed with activity. |
- After the lab tour, IBMers Clod Barrera and Craig Butler presented to the analysts.
- Cindy Grossman explained why IBM created a solutions center specific to archive solutions, and why wechose Guadalajara for its location.
- I presented the pains and challenges companies are facing, and why they should partner with IBM forarchive solutions to address those requirements
|Harley Puckett and I split the group. Harley is my colleague at the IBM Tucson ExecutiveBriefing Center who was the focal point for the various aspects of launching for the past eight months.He presented and moderated the presentations and demos to a collection of prospective clients. |
That's me on the left, with Harley on the right.
I moderated a series of speakers to press and analysts. These included:
- Mark LaBelle, Spectrum Health server and storage manager, and Steve Lawrence, Spectrum Health image solutions architect, presented their success story using IBM Grid Medical Archive Solution (GMAS). [Spectrum Health] manages seven hospitals and 130 service locations in Michigan, USA.
- Mark Uren, ABSA technical architect, presented their success story working with IBM in deploying their Information Lifecycle Management (ILM) which includes Enterprise Content Management and archiving. Mark flew in all the way from Johannesburg, South Africa. [ABSA] is the financial services subsidiary of Barclay's serving theAfrican continent.
- Jeffrey Beallor, president of [Global Data Vaulting], presented his success story as both a client and IBM Business Partner, offering backup and archiving solutions through "Software as a Service" (SaaS) business model. GlobalData Vaulting has its data centers in Canada, but provides services to clients worldwide.
We had a Q&A panel with the company representatives from Spectrum Health, ABSA, and Global Data Vaulting; followed by a Q&A panel with the collection of IBM executives to take questions from the press and analysts.Special thanks to Cyntia, Daniela, Carlos, Raul and Salvador for their help in making this a successful event!
(all three photos on this blog post taken by Mauricio, a professional photographer IBM hired for this event)
technorati tags: IBM, Andy Monshaw, Cindy Grossman, GASC, Global Archive, Solutions Center, Guadalajara, Jalisco, Mexico, Clod Barrera, Spectrum Health, ABSA, Global Data Vaulting, ILM, SaaS, GMAS
Normally, IBM only makes announcements on Tuesdays, but today, Friday, IBM announces that it acquired Diligent Technologies. What? I got a lot ofquestions about this, so I thought I would start with this...
When I posted in January that[IBM Acquires XIV],fellow EMC blogger Mark Twomey of StorageZilla fame, sent me a comment:
"Ah now Tony I wasn't poking fun. Indeed I find it fascinating that Moshe who's been sitting out on the fringes for years having been banished for being an obstructionist to EMC entering the mid-market is now back.
Which reminds me what happens with Diligent? There his as well aren't they or has he packed his stake in that in?"
As you might have guessed, I am privy to a lot of stuff going on behind the scenes at IBM that I can't talk about in this blog, and all these rumors in the blogosphere about IBM acquisition of Diligent was a topic I couldn't officially recognize, defend or deny, until official IBM announcements were made.
In his latest post, Mark wonders about[the last Tape and Mainframe sales person on earth]. He recounts my interaction with fellow HDS blogger Hu Yoshia about the energy benefits ofVirtual Tape Libraries. Knowing that we were going to announcement IBM's acquisition of Diligent soon, I thoughtthis would be a worthy exchange, driving up the sales of Diligent boxes (whether you buy them from IBM or HDS).Diligent already had reselling arrangements with HDS, and IBM plans to continue thosearrangements going forward with HDS. As I have explained before in my post [Supermarketsand Specialty Shops], IBM and HDS cater to different customers, so if a customer who wants the best technologyfrom a specialty shop, they can buy IBM Diligent products from HDS, but if they want one-stop shopping, they can buyIBM Diligent directly from IBM or its other IBM Business Partners.
(Perhaps a more tricky situation is that Diligent also had an arrangement with Sun Microsystems, which competesdirectly against IBM as another IT supermarket vendor, but I have not heard how IBM has decided to handle thisgoing forward.)
For more on this intricate mess of interconnected companies, alliances and partnerships, read Dave Raffo's article[Data dedupe dance cardfilling up] over at Storage Soup.
So, let's tackle the first question:
- Q1. What will happen to IBM's real tape library business?
Come on! IBM is Number one in tape, we've had virtual tape libraries since 1997 (the first in the industry)and continue to do well in both virtual and real tape libraries. Both provide value to the customer, and bothhave their place as part of the overall "information infrastructure". This acquisition provides yet another choicefor clients on our "supermarket" shelf.
(For those following the ["which is greener"] discussion, the robot of the IBM TS3500 real tape library consumes185W per frame (when moving) and each tape drive consumes 50W (when actively working on a tape). Compared to 13W per SATA disk drive, each 6-drive frame of a TS3500 consumes as much electricity as 37 SATA disk drives. If you are not running backups 24x7, the total KWh per day for your tape library is actually quite less, but as several people have pointed out, there are customers that do run backups 80-90 percent of the time. LTO-4 tapes can hold 800GB uncompressed, and SATA disk are now available in 1TB (1000 GB) size, so you can have fun with your own comparisons.)
Meanwhile, Scott Waterhouse, one of the few people at EMC who understand tape workloadslike backup and archive, takes me to task in his Backup Blog
with his post[I want a Red Ferrari
].For those who are surprised that anyone at EMC might understand backup workloads, EMC did acquire a company calledLegato, and perhaps Scott came from that acquisition. I've never met Scott in person, but based solely only fromhis writings, he seems to know his stuff and makes strong arguments for using IBM Tivoli Storage Manager (TSM) with deduplication and virtual tape libraries.
While TSM does a good job of "deduplicating" at the client first, backing up only changed data, Scott feels database and email repositories must be backed up entirely each time, which is what happens in many other backup software products. Some clients might have 80 percent database/email and only 20 percent files, while others might have less than 20 percent database/email and 80 percent files, so this might influence whether deduplication will have small or big benefit.If TSM has to backup the entire database, even though little has changed since the last backup, that is where deduplication on a virtual tape library can come in handy. For IBM DB2 and Oracle databases, IBM TSM application-aware Tivoli Data Protection module interface backs up only changed data, not the entire file. Thanks to IBM's FilesX acquisition-- (also coincidently from Israel) --IBM can extend this support now to SQL Server databases as well.However, to be fair, Scott is partly correct, TSM does backup some database and email repositories in their entirety, which is why it is a good idea to have BOTH an IBM virtual tape library with deduplication and Tivoli Storage Manager to handle all cases. This brings us to the next question:
- Q2. What will happen to IBM's patented "progressive backup" technology?
IBM will continue to use TSM's progressive backup technology. TSM already works great with Diligent virtual tapelibraries. One example is LAN-free backup. In this configuration, the TSM client writes its backups directly toa virtual or real tape library, over the SAN, and then sends the list of files backed up to the TSM server over theLAN to record in its database. This can greatly reduce IP traffic on your LAN during peak backup periods. For more about this, see the IBM Redbook titled["Get More Out of Your SAN with IBM Tivoli Storage Manager"].
Jon Toigo from DrunkenData asks[Did IBM Do Due Diligence Before Making Diligent Acquisition a Done Deal?] which is probably always a valid question. Unlike XIV, I wasn't part of the Diligent acquisition team, so I can't provide first hand account of the process. I am told that the IBM team did all the right things to make sure everything is going to turn out right.Sadly, many companies that make acquisitions in the IT industry fail to make them work. Fortunately, IBM is one of the few companies that has a great success record, with over 60 acquisitions in the past six years.In the Xconomy forum, Wade Rousch writes[IBM and the Art of Acquisitions]and gives some insight why IBM is different. Jon did not understand why Cindy Grossman, IBM VP of tape and archive solutions, ran the analyst conference call for this announcement, which brings me to the next question:
- Q3. What is Diligent virtual tape library going to be categorized as, a disk system or a tape system?
IBM organizes its storage systems based on the host application workloads.Products to address disk workloads (SVC, DS8000 series, DS6000 series, DS4000 series, DS3000 series, N series, XIV Nextra) are in our disk systems group. Storage that appears to host applications like a tape system to address workloads like backup and archive (tape drives, libraries and tape virtualization) are in our tape and archive group. IBM Diligent has two products, one for big workloads and one for medium workloads. Both look liketape systems, so our tape and archive team, who understand tape workloads like backup and archive the best, are obviously the best choice to support IBM Diligent in the mix.
Some might remember that IBM already has deduplication in its IBM N series products, called Advanced Single InstanceStorage, or A-SIS. Here is an[IBM System Storage N Series A-SIS Deduplication Deployment and Implementation Guide. This brings up the fourth question:
- Q4. What will happen to N series A-SIS feature?
IBM will offer both N series and Diligent deduplication capabilities. For disk workloads, IBM N series offers a post-process deduplication feature at no additional charge. For tape workloads, IBM will now offer an in-line deduplication feature with Diligent Technologies. Different workloads, different offerings.
As with any acquisition, there will be some changes. The 100 folks from Diligent will get to learn the IBM wayof doing things. This brings me to our fifth and final question:
- Q5. What is the correct spelling: deduplication or de-duplication?
It appears that Diligent has a corporate-wide standard to hyphenate this term (de-duplication), but the "word police" at IBM that control and standardize all "proper spellings, trademarks, and capitalization" have sent me corporate instructions a few days ago that IBM does not to hyphenate this term (deduplication). So, going forward, it will be "deduplication", or "dedupe" for short.I suspect one of the first tasks that our new IBMers from Diligent will be doing is removing all those hyphens fromthe [Diligent Technologies website]!
That's all for now, I'm off to Chicago, Illinois tomorrow!
technorati tags: IBM, Diligent, acquisition, LOST, EMC, Mark Twomey, Moshe Yanai, Pam West, StorageZilla, HDS, Hu Yoshida, Sun Microsystems, virtual, real, tape library, VTL, SATA, LTO, LTO-4, TS3500, Scott Waterhouse, information infrastructure, email, database, backup, archive, Oracle, DB2, SQL Server, FilesX, SAN, LAN, IP, LAN-free, TSM, Tivoli Storage Manager, XIV, Nextra, A-SIS, Chicago, deduplication, Dave Raffo, dedupe
So here we are in January, named after the two-faced Roman god Janus, who in their mythology was the god of gates and doors, and beginnings and endings.
-- Roger von Oech[Our "Janus-Like" Powers]
Well, it's 2008, which could mark the end to RAID5 and mark the beginnings of a new disk storagearchitecture. IBM starts the year with exciting news, acquiring new disk technology from a smallstart-up called XIV, led by former-EMCer Moshe Yanai. Moshe was ousted publicly in 2001 from hisposition as EMC's VP of engineering, and formed his own company. It didn't take long for EMC bloggersto poke fun at this already. Mark Twomey, in his StorageZilla blog, had mentioned XIV before back in August,[XIV], and again todayin [IBM Buys XIV].
The following is an excerpt from the [IBM Press Release]:
To address the new requirements associated with next generation digital content, IBM chose XIV and its NEXTRA™ architecture for its ability to scale dynamically, heal itself in the event of failure, and self-tune for optimum performance, all while eliminating the significant management burden typically associated with rapid growth environments. The architecture also is designed to automatically optimize resource utilization of all the components within the system, which can allow for easier management and configuration and improved performance and data availability.
"We are pleased to become a significant part of the IBM family, allowing for our unique storage architecture, our engineers and our storage industry experience to be part of IBM's overall storage business," said Moshe Yanai, chairman, XIV. "We believe the level of technological innovation achieved by our development team is unparalleled in the storage industry. Combining our storage architectural advancements with IBM's world-wide research, sales, service, manufacturing, and distribution capabilities will provide us with the ability to have these technologies tackle the emerging Web 2.0 technology needs and reach every corner of the world."
The NEXTRA architecture has been in production for more than two years, with more than four petabytes of capacity being used by customers today.
Current disk arrays were designed for online transaction processing (OLTP) databases. The focus was onusing fastest most expensive 10K and 15K RPM Fibre Channel drives, with clever caching algorithmsfor quick small updates of large relational databases. However, the world is changing, and peoplenow are looking for storage designed for digital media, archives, and other Web 2.0 applications.
One problem that NEXTRA architecture addresses is RAID rebuild. In a standard RAID5 6+P+S configuration of 146GB 10K RPM drives, the loss of one disk drive module (DDM) was recovered by reconstructing the data from parity of the other drives onto the spare drive. The process took46 minutes or longer, depending on how busy the system was doing other things. During this time,if a second drive in the same rank fails, all 876GB of data are lost. Double-drive failures are rare,but unpleasant when they happen, and hopefully you have a backup on tape to recover the data from.Moving to slower, less expensive SATA drives made this situation worse. The drives have highercapacity, but run at slower speeds. When a SATA drive fails in a RAID5 array, it could take severalhours to rebuild, and that is more time exposure for a second drive failure. A rebuild for a 750GBSATA drive would take five hours or more,with 4.5 TB of data at risk during the process if a second drive failure occurs.
The Nextra architecture doesn't use traditional RAID ranks or spare DDMs. Instead, data is carved up into 1MBobjects, and each object is stored on two physically-separate drives. In the event of a DDM loss, allthe data is readable from the second copies that are spread across hundreds of drives. New copies aremade on the empty disk space of the remaining system. This process can be done for a lost 750GB drive in under20 minutes. A double-drive failure would only lose those few objects that were on both drives, so perhaps1 to 2 percent of the total data stored on that logical volume.
Losing 1 to 2 percent of data might be devastating to a large relational database, as this could impactthe entire access to the internal structure. However, this box was designed for unstructuredcontent, like medical images, music, videos, Web pages, and other discrete files. In the event of a double-drivefailure, individual files would be recovered, such as with IBM Tivoli Storage Manager backup software.
IBM will continue to offer high-speed disk arrays like the IBM System Storage DS8000 and DS4800 for OLTP applications, and offer NEXTRA for this new surge in digital content of unstructured data. Recognizing this trend, diskdrive module manufacturers will phase out 10K RPM drives, and focus on 15K RPM for OLTP, and low-speedSATA for everything else.
Update: This blog post was focused on the version of XIV box available as of January 2008 that was built by XIV prior to the IBM acquisition. IBM has since made a major revision, made available August 2008 thataddresses a variety of workloads, including database, OLTP, email, as well as digital content and unstructuredfiles. Contact your IBM or IBM Business Partner for the latest details!
Bottom line, IBM continues to celebrate the new year, while the EMC folks in Hopkington, MA will continue to nurse their hangovers. Now that's a good way to start the new year!
technorati tags: Janus, two-faced, Roman god, Roger Von Oech, IBM, RAID5, XIV, EMC, Moshe Yanai, Mark Twomey, StorageZilla, NEXTRA, double-drive failure, rebuild, HDD, DDM, HDD, digital content, unstructured data
Yesterday, I promised I would cover other products from the Feb 12 announcement. Today I will focus on the IBM SAN768B director. Some people are confused on the differences between switchesand directors. I find there are three key differences:
- Directors are designed to be 24x7 operation, highly available with no single points of failure or repair. Generally, all components in directors are redundant and hot-swappable, including Control Processors. In switches, some components are redundant and hot-swappable, such as fans and power supplies), but not the “motherboard” or controller. Often you have to take down a switch to make firmware or major hardware changes or upgrades.
- Directors are designed to take in "blades" with different features, port counts, or protocol capabilities. You can add or remove blades while the system is up and running. Switches have a fixed number of ports. (A Small Form-factor Pluggable optical transceiver [SFP] is the component that turns electric pulses into light pulses (and visa versa). You plug the SFP into the switch, and then the fiber optic cable is plugged into the SFP).
With switches, you often start with a base number of active ports, and then can enable the rest of the ports as you need them.
- Directors have hundreds of ports. Switches tend to have 64 ports or less.
Last year, Brocade acquired McDATA. Both were OEMs for IBM, and IBM distinguished that in the naming convention. The IBM SAN***B name was used to denote products manufactured for IBM by Brocade, and a SAN***M name was used to denote products manufactured by McDATA.
At that time, Brocade and McDATA equipment did not mix very well on the same fabric, so IBM retained the naming convention so that you as a customer knew what it worked with.
Brocade now has released with new levels of both operating systems--Brocade's FOS and McDATA's EOS--and their respective fabric managers--Brocade Fabric Manager (FM) and McDATA's Enterprise Fabric Connectivity Manager (EFCM)--so that they have full interoperability.
Brocade's goal is to enhance EFCM to be a common software management platform for all of their products going forward.
IBM used the maximum port count in the name to provide some clue as to the size of the switch or director. The SAN16B-2 or the SAN32B-3 are switches that have a maximum of 16 and 32 ports. The SAN256B supports a maximumeight blades of your choosing.Two different types were supported for FC ports, a 16-port blade and a 32-port blade.If all eight were 32-port blades then the maximum was 256 ports, hence the name. But then Brocade began offering 48-port blades. Should IBM change the name? No, it decided to leave itthe SAN256B even though it can now have a maximum of 384 ports.
Not to confuse anyone, the SAN768B also has a maximum of 384 ports, in the same 14U dimensions, but with a special twist. Normally to connect two directors together you use up ports from each, in what are called "inter-switch links" (ISL).These are ports you are taking away from availability from the servers and storage controllers. The SAN768Boffers a new alternative called "inter-chassis links". Each SAN768B has two processing blades, and each has two ICL ports, so with just four two-meter (2m) cables, you get the equivalent of 128 FC 8 Gbps ISL links without using 128 individual ports on each side. That is like giving you 256 ports back for use with servers and storage!
Since IBM directors require 240 volt power, IBM TotalStorage SAN Cabinet C36 include power distribution units (PDUs). PDUs are just glorified power strips, but a new intelligent PDU (iPDU) option introduces additional intelligence to monitor energy consumption for customers looking to measure, and perhaps charge back, energy consumption to the rest of the business. You can stack two SAN768B in one cabinet, one on top of the other, and connected via ICLs, it wouldlook like one huge 768-port backbone.
As a backbone for your data center, the SAN768B is positioned for two emerging technologies:
- 8 Gbps Fibre Channel (FC)
The SAN768B is powerful enough to have 32-port blades run full speed on all ports off-blade without oversubscription. Oversubscription is an emotional topic.
Normally, blades (like switches) can handle all traffic at full speed without delays provided the in-bound and out-bound ports involved are all on the same blade. In a director, however, if you need to communicate from a port on one blade to a port on a different blade, it is possible that off-blade traffic might be constrained or delayed in its transit across the backplane.
On the SAN768B, both the 16-port and 32-port blades can run at full 8 Gbps speed, and the 48-port is exposed to oversubscription only if you have more than 32-ports running at full 8 Gbps transferring data off-blade concurrently.
The new 8 Gbps SFPs support auto-negotiation at N-1 and N-2 generation link speeds. This means that they will automatically slow down when communicating with 4Gpbs and 2 Gbps devices, but they cannot communicate with 1 Gbps devices. If you are still using 1 Gbps devices in your data center, you will need to use 4 Gbps SFPs (which also support 2 Gbps and 1 Gbps link speeds) to communicate with those older devices.
- Fibre Channel over Ethernet (FCoE)
Wikipedia has a good summary of [FCoE].
Basically, this new technology enables transport of Fibre Channel packets over 10 Gbps Ethernet links. This 10 Gbps Ethernet can also be used to carry traditional iSCSI and TCP/IP traffic. FCoE introduces new extensions to provide Fibre Channel characteristics, like being lossless, and offering consistent performance. The ANSI T11 team is driving FCoE as an open standard, and at the moment it is not fully baked. I suggest you don't buy any FCoE equipment prematurely, as pre-standard devices or host bus adapters could get you burned later when the standard is finalized.
The idea is that FCoE blades can be installed in a SAN768B along with traditional FC blades, allowing routing of traffic between traditional FC and new FCoE ports. Those who have invested in FCIP for long distance replication will be able to continue using either FC or FCoE inputs.
One of the big drivers of FCoE is IBM BladeCenter. Currently, most BladeCenter blades support both Ethernet and FC connectivity and are connected to both Ethernet and FC switches on the back of each BladeCenter chassis. With FCoE, we have the potential to run both FC and IP traffic across simpler all-Ethernet blades, connecting through all-Ethernet switches on the backs of each chassis.
For more information on the IBM SAN768B, see the [IBM Press Release]. For more detailson Brocade's strategy, here is an 8-page white paper on their[Data Center Fabric] vision.
technorati tags: IBM, SAN768B, SAN, switch, director, backbone, SFP, Brocade, McDATA, BOS, EOS, BFM, EFCM, blade, ISL, ICL, FC, FCP, FCIP, FCoE, BladeCenter, Ethernet, 8Gbps, 10GbE, Data Center Fabric
Today, IBM announced a software/server/storage combo that out-performed both HP and Sun. Here is an excerpt from the[IBM Press Release
IBM today announced that its recently introduced E7100 Balanced Warehouse(TM), consisting of the IBM POWER6(TM) processor-based System p(TM) 570 server, the IBM System Storage(TM) DS4800 and DB2(R) Warehouse 9.5, is already lapping the field in performance. The new data warehousing solution is now ranked number one in both performance and in price/performance in the TPC-H business:
- 2 x speed-up over HP system with Oracle 10g and equal number of cores;
- 3.17 x speed up over Sun with Oracle 10g and 38 percent price advantage;
- A new world record by loading 10 terabytes (TB) data at six TB per hour (TB/hr).
"These latest benchmark results further prove IBM's strength and leadership in the business intelligence arena," said Scott Handy, vice president of marketing and strategy, IBM Power Systems. "The E7100 Balanced Warehouse is a complete data warehousing solution comprised of pre-tested, scalable and fully integrated system and storage components, designed to get customers up and running quickly to get to the real benefit of unprecedented business insight and intellect."
Those not familiar with the [IBM Balanced Warehouse], it is the productized version of DB2's ["Balanced Configuration Unit" or BCU] reference configuration. The IBM Balanced Warehouse presents a pre-tested, pre-configured solution for Business Intelligence (BI) applications. These are in the form of "building blocks" thatcan be combined to get to the size you need, with incremental growth as your business expands. Each building block expertly matches the CPU processor and RAM memory of the server, with the appropriate I/O bus, cabling, and capacity of the disk system, resulting in optimal performance.
IBM DB2 software is designed to allow you to combine multiple building blocks into a single system image. This greatly simplifies your data warehouse deployment, and can help ensure success. For example, for a 50TB deployment, you can take a base 2TB building block, add 24 more, each with 2TB of disk capacity, and have a completely balanced environment. IBM clients have built systems over 300TB in this manner with these building blocks.
The IBM Balanced Warehouse is offered in several configurations:
The [C-class models] are designed for SMB customers, employing an IBM System x server with internal or direct attached EXP3000 disk.
The [D-class models] are the next step up, offering department-level data marts and data warehouse for larger deployments, employing an IBM System x server with EXP3000 or System Storage DS3400 entry level disk.
The [E-class models] represent our top-of-the line configurations for our largest enterprise deployments. The [E6000] run Linux on an IBM System x server with System Storage DS48000 disk. The [E7000] run AIX on an IBM System p575 server with DS4800 disk. The new [E7100] mentioned above runsAIX on a POWER6-based IBM System p570 with DS4800 disk.
As I have mentioned before, in my post[Supermarketsand Specialty Shops],companies are looking for complete solutions, preferably from a single vendor like IBM, HP and Sun, rather than buying piece part components from different vendors and hoping the combined ["Frankenstein"] configuration meets business requirements.
The DS4800 is an obvious choice for this solution, providing an excellent balance of cost and performance, in a modular packaging that is ideal for the incremental growth design inherent in the IBM Balanced Warehouse philosophy. To learn more about this disk system, see the official [DS4800 website] for details, descriptions and specifications.
technorati tags: IBM, HP, Sun, Balanced Warehouse, balanced, configuration, unit, BCU, Oracle, 10g, EXP3000, DS3400, DS4800, disk, storage, system, datamart, data, warehouse, Business Intelligence, BI, Frankenstein, supermarket, specialty shop, E6000, E7000, E7100
Well, it's Tuesday again, and that means IBM announcements!
We've got a variety of storage-related items today, so here's my quick recap:
- DS5020 and EXP520 disk systems
[IBM System Storage DS5020]
provides the functional replacement for DS4700 disk systems. These are combined controller
and 16 drives in a compact 3U package.
The EXP520 expansion drawer provides additional 16 drives per 3U drawer. A DS5020 can
support upo to six additional EXP520, for a total of 112 drives per system.
The DS5020 supports both 8 Gbps FC as well as 1GbE iSCSI.
- New Remote Support Manager (DS-RSM model RS2)
The [IBM System Storage DS-RSM Model
RS2] supports of up to 50 disk systems, any mix of DS3000, DS4000 and DS5000 series.
It includes "call home" support, which is really "email home", sending error alerts to IBM
if there are any problems. The RSM also allows IBM to dial-in to perform diagnostics before
arrival, reducing the time needed to resolve a problem. The model RS2 is a beefier model
with more processing power than the prior generation RS1.
- New Ethernet Switches
With the increased interest in iSCSI protocol, and the new upcoming Fibre Channel over
Convergence Enhanced Ethernet (FCoCEE), IBM's re-entrance into the ethernet switch market
has drawn a lot of interest.
- The [IBM Ethernet Switch r-
series] offers 4-slot, 8-slot, 16-slot, and 32-slot models. Each slot can handle either
16 10GbE ports, or 48 1GbE ports. This means up to 1,536 ports.
- The [c-series] now offers a
24-port model. This is either 24 copper and 4 fiber optic, or 24 fiber optic.
The "hybrid fiber" SFP fiber optic can handle either single or multi-mode, eliminating the
need to commit to one or the other, providing greater data center flexibility.
- The [IBM Ethernet Switch B24X]
offers 24 fiber optic (that can handle 10GbE or 1GbE) and 4 copper (10/100/1000 MbE RJ45)
- Storage Optimization and Integration Services
[IBM Storage Optimization and
Integration Services] are available. IBM service consultants use IBM's own
Storage Enterprise Resource Planner (SERP) software to evaluate your environment and provide
recommendations on how to improve your information infrastructure. This can be especially
helpful if you are looking at deploying server virtualization like VMware or Hyper-V.
As people look towards deploying a dynamic infrastructure, these new offerings can be a
technorati tags: IBM, DS5020, EXP520, DS-RSM, iSCSI, FCoE, FCoCEE, B04R, B08R, B16R, B32R, B24C, B24X, GbE, 10GbE, SFP, Hybrid Fiber, SERP, VMware, Hyper-V
Today, January 16, IBM launches its latest disk system, the DS3000 series.
There are actually three products in the DS3000 series:
The DS3200 is a 2U high, 12 drive system that attaches to servers via 3Gbps Serial Attach (SAS) interface.You can expand this to 48 drives by added EXP3000 expansion units. Here are theDS3200 specifications.
The DS3400 is a 2U high, 12 drive system that attaches to servers via 4Gbps Fibre Channel (FC) interface.You can expand this to 48 drives by added EXP3000 expansion units. Here are the DS3400 specifications.
The EXP3000 is a 2U high, 12 drive expansion drawer. It was announced back in August 2006, but is part of theoverall DS3000 series. It can be used directly with servers, but is also designed to be attached to the back of the DS3200 or DS3400 to increase capacity.Here are the EXP3000 specifications.
With this announcement, IBM provides entry-level storage at the "less-than-$5000" price point, withsupport for intermix of 10K and 15K RPM drives, and scalable up to 14.4 TB capacity.This would be ideal storage for HP, Dell, IBM System x and BladeCenter servers.
technorati tags: IBM, disk, DS3000, DS3200, DS3400, EXP3000, HP, Dell, SAS, SATA, FC
Well, it's Thursday, and today IBM is having a major launch for storage. We have lots of exciting announcements today, so here is the major highlights:
- IBM Storwize V7000 midrange disk system
Fellow blogger Rolf Potts just completed his [No Baggage Challenge], travelling around the world, twelve countries in six weeks with no luggage. I first learned of this trip from fellow published author and blogger Tim Ferriss in his post [How to Travel 12 Countries with No Baggage Whatsoever]. This trip was sponsored by a travel agency [BootsnAll.com] and travel clothing manufacturer [ScotteVest].
From New York, Rolf went to London, Paris, Madrid, Morocco, Cairo, South Africa, Bangkok Thailand, Malaysia, Singapore, New Zealand, Australia, and then back to United States. I was hoping to run into him while I was in Australia and New Zealand last month, but our schedules did not line up.
Travelingwithout baggage is more than just a convenience, it is a metaphor for the philosophy that we should keep only what we need, and leave behind what we don't. This was the approach taken by IBM in the design of the IBM Storwize V7000 midrange disk system.
The IBM Storwize V7000 disk system consists of 2U enclosures. Controller enclosures have dual-controllers and drives. Expansion enclosures have just drives. Enclosures can have either 24 smaller form factor (SFF) 2.5-inch drives, or twelve larger 3.5-inch drives. A controller enclosure can be connected up to nine expansion enclosures.
The drives are all connected via 6 Gbps SAS, and come in a variety of speeds and sizes: 300GB Solid-State Drive (SSD); 300GB/450GB/600GB high-speed 10K RPM; and 2TB low-speed 7200 RPM drives. The 12-bay enclosures can be intermixed with 24-bay enclosures on the same system, and within an enclosure different speeds and sizes can be intermixed. A half-rack system (20U) could hold as much as 480TB of raw disk capacity.
This new system, freshly designed entirely within IBM, competes directly against systems that carry a lot of baggage, including the HDS AMS, HP EVA, an EMC CLARiiON CX4 systems. Instead, we decided to keep the what we wanted from our other successful IBM products.
- Inspired by our successful XIV storage system, IBM has developed a web-based GUI that focuses on ease-of-use. This GUI uses the latest HTML5 and dojo widgets to provide an incredible user experience.
- Borrowed from our IBM DS8000 high-end disk systems, state-of-the-art device adapters provide 6 Gbps SAS connectivity with a variety of RAID levels: 0, 1, 5, 6, and 10.
- From our SAN Volume Controller, the embedded [ SVC 6.1 firmware] provides all of the features and functions normally associated with enterprise-class systems, including Easy Tier sub-LUN automated tiering between Solid-State Drives and Spinning disk, thin provisioning, external disk virtualization, point-in-time FlashCopy, disk mirroring, built-in migration capability, and long-distance synchronous and asynchronous replication.
To learn more on this, read the [announcement letter], [landing page],
[services page], as well as the blog posts from fellow master inventor and blogger Barry Whyte (IBM) at his [Storage Virtualization] blog.
- My New Book is Now Available!
Finally, the various "internal NDA" that kept me from publishing this sooner have expired, so now I have the long-awaited [Inside System Storage: Volume II], documenting IBM's transformation in its storage strategy, including behind-the-scenes commentary about IBM's acquisitions of XIV and Diligent. Available initially in paperback form. I am still working on the hard cover and eBook editions.
For those who have not yet read my first book, Inside System Storage: Volume I, it is still available from my publisher Lulu, in [hard cover], [paperback] and [eBook] editions.
- IBM System Storage DS8800
A lesson IBM learned long ago was not to make radical changes to high-end disk systems, as clients who run mission-critical applications are more concerned about reliability, availability and serviceability than they are performance or functionality. Shipping any product before it was ready meant painfully having to fix the problems in the field instead.
(EMC apparently is learning this same lesson now with their VMAX disk system. Their Engenuity code from Symmetrix DMX4 was ported over to new CLARiiON-based hardware. With several hundred boxes in the field, they have already racked up over 150 severity 1 problems, roughly half of these resulted in data loss or unavailability issues. For the sake of our mutual clients that have both IBM servers and EMC disk, I hope they get their act together soon.)
To avoid this, IBM made incremental changes to the successful design and architecture of its predecessors. The new DS8800 shares 85 percent of the stable microcode from the DS8700 system. Functions like Metro Mirror, Global Mirror, and Metro/Global Mirror, are compatible with all of the previous models of the DS8000 series, as well as previous models of the IBM Enterprise Storage Server (ESS) line.
The previous models of DS8000 series were designed to take in cold air from both front and back, and route the hot air out the top, known as chimney design. However, many companies are re-arranging their data centers into separate cold aisles and hot aisles. The new DS8800 has front-to-back cooling to help accommodate this design.
My colleague Curtis Neal would call the rest of this a "BFD" announcement, which of course stands for "Bigger, Faster and Denser". The new DS8800 scales-up to more drives than its DS8700 predecessor, and can scale-out from a single-frame 2-way system to a multi-frame 4-way system. IBM has upgraded to faster 5GHz POWER6+ processors, with dual-core 8 Gbps FC and FICON host adapters, 8 Gbps device adapters, and 6 Gbps SAS connectivity to smaller form factor (SFF) 2.5-inch SAS drives. IBM Easy Tier will provide sub-LUN automated tiering between Solid-State Drives and spinning disk. The denser packaging with SFF drives means that we can pack over 1000 drives in only three frames, compared to five frames required for the DS8700.
To learn more, read the [landing page] or the announcement letters for the machine types , , , .
- IBM System Storage SAN Volume Controller v6.1
The [IBM System Storage SAN Volume Controller] software release v6.1 brings Easy Tier sub-LUN automated tiering to the rest of the world. IBM Easy Tier moves the hottest, most active extents up to Solid-State Drives (SSD) and moves the coldest, least active down to spinning disk. This works whether the SSD is inside the SVC 2145-CF8 nodes, or in the managed disk pool.
Tired of waiting for EMC to finally deliver FAST v2 for your VMAX? It has been 18 months since they first announced that someday they would have sub-LUN automatic tiering. What is taking them so long? Why not virtualize your VMAX with SVC, and you can have it sooner!
SVC 6.1 also upgrades to a sexy new web-based GUI, which like the one for the IBM Storwize V7000, is based on the latest HTML5 and dojo widget standards. Inspired by the popular GUI from the IBM XIV Storage System, this GUI has greatly improved ease-of-use.
To learn more, read the [announcement letter] and [SVC product page].
These are just a subset of today's announcements. To see the rest, read [What's New].
technorati tags: IBM, announcements, #IBMstorage, Storwize V7000, DS8800, Lulu, SVC, Easy Tier, SAS
Continuing this week's discussion on IBM announcements, today I'll cover our integrated systems.
The problem with spreading out these announcements across several days' worth of blog posts is that others beat you to the punch. Fellow blogger Richard Swain (IBM) has his post [Move that File], and TechTarget's Dave Raffo has an article titled [
"IBM SONAS gains policy-driven tiering, gateway to IBM XIV Storage System"].
By combining multiple components into a single "integrated system", IBM can offer a blended disk-and-tape storage solutions. This provides the best of both worlds, high speed access using disk, while providing lower costs and more energy efficiency with tape. According to a study by the Clipper Group, tape can be 23 times less expensive than disk over a 5 year total cost of ownership (TCO).
The two we introduced recently were the [IBM Information Archive] and the Scale-Out Network Attached Storage (SONAS). This week, IBM announced some enhancements as SONAS v1.1.1 release. SONAS is the productized version of IBM's Scale-Out File Services (SoFS), which I discussed in my posts [Area Rugs versus Wall-to-Wall Carpeting] and [More details about IBM's Clustered Scalable NAS].
- ILM and HSM data movement
I have covered Information Lifecycle Management several times in this post, including my posts [ILM for my iPod], [Times a Million], and [Using ILM to Save Trees], to name a few.
I've also covered Hierarchical Storage Management, such as my post [Seven Tiers of Storage at ABN Amro], and my role as lead architect for DFSMS on z/OS in general, and DFSMShsm in particular.
However, some explanation might be warranted in the use of these two terms in regards to SONAS. In this case, ILM refers to policy-based file placement, movement and expiration on internal disk pools. This is actually a GPFS feature that has existed for some time, and was tested to work in this new configuration. Files can be individually placed on either SAS (15K RPM) or SATA (7200 RPM) drives. Policies can be written to move them from SAS to SATA based on size, age and days non-referenced.
HSM is also a form of ILM, in that it moves data from SONAS disk to external storage pools managed by IBM Tivoli Storage Manager. A small stub is left behind in the GPFS file system indicating the file has been "migrated". Any reference to read or update this file will cause the file to be "recalled" back from TSM to SONAS for processing. The external storage pools can be disk, tape or any other media supported by TSM. Some estimate that as much as 60 to 80 percent of files on NAS have low reference and should be stored on tape instead of disk, and now SONAS with HSM makes that possible.
This distinction allows the ILM movement to be done internally, within GPFS, and the HSM movement to be done externally, via TSM. Both ILM and HSM movement take advantage of the GPFS high-speed policy engine, which can process 10 million files per node, run in parallel across all interface nodes. Note that TSM is not required for ILM movement. In effect, SONAS brings the policy-based management features of DFSMS for z/OS mainframe to all the rest of the operating systems that access SONAS.
- HTTP and NIS support
In addition to NFS v2, NFS v3, and CIFS, the SONAS v1.1.1 adds the HTTP protocol. Over time, IBM plans to add more protocols in subsequent releases. Let me know which protocols you are interested in, so I can pass that along to the architects designing future releases!
SONAS v1.1.1 also adds support for Network Information Service (NIS), a client/server based model for user administration. In SONAS, NIS is used for netgroup and ID mapping only. Authentication is done via Active Directory, LDAP or Samba PDC.
- Asynchronous Replication
SONAS already had synchronous replication, which was limited in distance. Now, SONAS v1.1.1 provides asynchronous replication, using rsync, at the file level. This is done over Wide Area Network (WAN) across to any other SONAS at any distance.
- Hardware enhancements
Interface modules can now be configured with either 64GB or 128GB of cache. Storage now supports both 450GB and 600GB SAS (15K RPM) and both 1TB and 2TB SATA (7200 RPM) drives. However, at this time, an entire 60-drive drawer must be either all one type of SAS or all one type of SATA. I have been pushing the architects to allow each 10-pack RAID rank to be independently selectable. For now, a storage pod can have 240 drives, 60 drives of each type of disk, to provide four different tiers of storage. You can have up to 30 storage pods per SONAS, for a total of 7200 drives.
An alternative to internal drawers of disk is a new "Gateway" iRPQ that allows the two storage nodes of a SONAS storage pod to connect via Fibre Channel to one or two XIV disk systems. You cannot mix and match, a storage pod is either all internal disk, or all external XIV. A SONAS gateway combined with external XIV is referred to as a "Smart Business Storage Cloud" (SBSC), which can be configured off premises and managed by third-party personnel so your IT staff can focus on other things.
See the Announcement Letters for the SONAS [hardware] and [software] for more details.
For those who are wondering how this positions against IBM's other NAS solution, the IBM System Storage N series, the rule of thumb is simple. If your capacity needs can be satisfied with a single N series box per location, use that. If not, consider SONAS instead. For those with non-IBM NAS filers that realize now that SONAS is a better approach, IBM offers migration services.
Both the Information Archive and the SONAS can be accessed from z/OS or Linux on System z mainframe, from "IBM i", AIX and Linux on POWER systems, all x86-based operating systems that run on System x servers, as well as any non-IBM server that has a supported NAS client.
technorati tags: , IBM, Announcements, SONAS, SoFS, Information+Archive, Richard Swain, TechTarget, ILM, HSM, storage tiers, GPFS, TSM, HTTP, NIS, TSM, NAS, iRPQ, XIV, SBSC, z/OS, Linux, AIX
If you are ever down in Sao Paulo, Brazil, may I suggest not drinking "American amounts" of their "Brazilian Coffee". The coffee here is "robust", to say the least.
Yesterday, my blog focused on IBM iSCSI offerings that were announced in August.Also announced earlier this month, the Integrated Removable Media Manager (IRMM) on System zhas been years in the making.IRMM is a new robust systems management product for Linux® on IBM System z™ that manages open system media in heterogeneous distributed environments and virtualizes physical tape libraries. IRMM combines the capacity of multiple heterogeneous libraries into a single reservoir of tape storage that can be managed from a central point.By providing an integrated solution with the opportunity for both mainframe z/OS DFSMSrmm and distributed Tivoli® Storage Manager™ environments to be managed by IRMM, System z can now be a hub for the management of removable media.
The people who thought the "Mainframe is obsolete", and those that thought "Tape is dead", are both proven wrong again with this announcement. People are looking to deploy robust tape automation for backup and archive, and this convergence with mainframe makes perfect sense by providing business value that extends to other distributed systems.
technorati tags: American, Brazilian, coffee, IBM, iSCSI, announcements, IRMM, RMM, DFSMSrmm, TSM, Tivoli, mainframe, tape, robust, library, automation, DFSMSrmm, backup, archive
Yesterday, I asked if you were prepared for the future? The future is now. Today, IBM announced its["New Enterprise Data Center"
] vision and strategy which spans software, hardware and services in dealing withthe latest challenges that our clients are faced with today, or will face sooner or later this century.
Here's an excerpt:
Align IT with business goals
These changes demand that IT improve cost and service delivery, manage escalating complexity, and better secure the enterprise. And aligning IT more closely with the business becomes a primary goal. The new enterprise data center is an evolutionary new model for efficient IT delivery that helps provide the freedom to drive business innovation. Through a service oriented model, IT will be able to better manage costs, improve operational performance and resiliency, and more quickly respond to business needs. This approach will deliver dynamic and seamless access to IT services and resources, improving both productivity and satisfaction.
IBM's Vision for the New Enterprise Data Center
The new enterprise data center can improve the integration of people, process, and technology in your business to help you improve efficiency and effectiveness. As you implement a new enterprise data center strategy, your infrastructure becomes open, efficient, and easy to manage. And your IT staff can move from a focus on fixing IT problems to solving business challenges. Ultimately your processes become standardized and efficient, focused on business needs rather than technology.
A lot was announced today, so I will give a quick recap now, and cover specific areas over the rest of the week.
- IBM System z10 Enteprise Class
IBM introduces its most powerful mainframe. Before you think "Wait, that's a mainframe, that doesn't apply to me"stop to consider all that IBM has done to make the mainframe an "open system" without sacrificing security oravailability:
- Open standard connectivity, including TCP/IP and now 6Gbps Infiniband and 10GbE Ethernet.
- Unix System Services. Yes, z/OS is certified to provide UNIX interfaces for today's applications.
- HFS and zFS file systems that can be mounted, shared, and used by traditional z/OS applications and JCL.
- Linux and Java. Many of today's largest websites are run on mainframes behind the scenes.
- Extreme bandwidth. The z10 EC handles up to 336 FICON channels (4Gbps) for large data processing workloads
The z10 EC is as powerful as 1,500 x86 (such as Intel or AMD) servers, but consumes 85 percent less floorspace and85 percent less energy. (They should put a "green" stripe down the front of this box just to remind everyone how energy efficient this server really is!) For more on the z10 EC, see the[Press Release].
- Enhanced IBM System Storage DS8000
With the XIV acquisition taking the role as the best place to put unstructured files for Web 2.0 applications,the IBM DS8000 can focus on its core strength, managing databases and online transactions for the mainframe.There's enough here to justify its own post, so I will cover this later.
- IT Service Management Center for z (ITSMCz)
Trust me, I don't make up these acronyms. IT Service Management are the policies and procedures for managingan IT environment, such as following the best practices documented in the IT Infrastructure Library (ITIL).In the past, IBM tools have focused on Linux, UNIX and Windows on distributed servers, but today ITSMCz bringsall of that to the mainframe! (or perhaps more correct to say "brings the mainframe to all that"!)
- IT Transformation & Optimization - Infrastructure Strategy and Planning services
I don't make up the names of our service offerings either. However, one thing is clear, it is time for peopleto re-evaluate their current data center, and come up with a new plan. The average data center is 15 years old.According to Gartner Group, more than 70 percent of the world's "Global 1000" organizations will have to make significant modifications to their data centers in the next five years. IBM can help, and is rolling outa new set of services specifically to help clients make this transition, to better align their IT to their business strategies.
- Economic Stimulus Package
IBM borrowed this idea from the U.S. government. IBM Global Financing is offering special terms and ratesfor new equipment installed by December 31 this year.
Want to learn more? Read this 15-page[IBM's Vision
technorati tags: IBM, New Enterprise Data Center, vision, strategy, z10 EC, mainframe, Enterprise Class, Jim Stallings, Linux, UNIX, Windows, z/OS, ITSMCz, Gartner, DS8000, infrastructure, services, economic stimulus package
Well, it's Tuesday, and you know what that means? IBM announcements!
Today we had several for the IBM System Storage product line. Here are some of them:
- DS8000 gets thinner, leaner and faster
The 4.3 level of microcode for the IBM System Storage DS8000 series disk systems [announced enhancements] for both fixed block architecture (FBA) LUNs and count key data (CKD) volumes.
For FBA LUNs that attach to Linux, UNIX and Windows distributed systems, IBM announced DS8000 Thin Provisioning native support. Of course, many people already had this by putting IBM System Storage SAN Volume Controller (SVC) in front, but now DS8000 clients out there without SVC can also achieve benefits ofthin provisioning. This support also improves quick initialization a whopping 2.6 times faster.
For CKD volumes attached to z/OS on System z mainframes, IBM announced zHPF multitrack support for z/OS 1.9 and above. zHPF provide high performance FICON performance, and can now handle multitrack I/O transfers foreven better performance for zFS, HFS, PDSE, and extended striped data sets.
- XIV gets better connected
A lot of XIV[announced enhancements] and preview announcements centered around better connectivity. Here's a run down:
- Better host attachment connectivity by beefing up the interface modules that hold the FCP and iSCSI interface cards. XIV disk arrays have 3 to 6 of these in different configurations, and since they manage both their own disks,as well as receive host I/O requests for other disks, are basically doing double-duty.These interface modules can now be ordered as [Dual-CPU] modules.
- Better infrastructure management by connecting XIV with the industry standard SMI-S interface to IBM Tivoli Storage Productivity Center. Now, XIV can be part of the single pane of glass console that manages all of your other disk arrays, tape libraries and SAN fabrics.
- Better copy services for backups by connecting XIV with IBM Tivoli Storage Manager Advanced Copy Services. TSM for Advanced Copy Services is application aware and can coordinate XIV Snapshots similar to its current support for SVC and DS8000 FlashCopy capabilities.
- Better connectivity to security systems by supporting LDAP credentials. Before, you had individual userid and passwords for each XIV, and these were probably different than all the other userid/password combinations you have for every other box on your data center floor. IBM is working on getting all products to support theLightweight Directory Access Protocol, or [LDAP] so that we can reach the nirvana of "single sign-on",one userid/password per administrator for all IT devices in the company.
- Better support with flexible warranty periods and non-disruptive code load options.
- Better remote copy support by connecting to sites far, far away. IBM previewed that it will provideasynchronous disk mirroring from one XIV to another XIV natively. Before this, XIV's synchronous mirroring was limited to 300km distances. Many of our clients do long distance global mirroring of their XIV today behind an SVC, but again, for those out there that don't yet have an SVC, this can be a reasonable alternative.
- TS7650 ProtecTIER data deduplication appliance now offers "no dedupe" option
|In what some might consider a surprising move, IBM announced a "no dedupe" licensing option on their premiere deduplication solution, which somewhat reminds me of IBM's NOCOPY option on DS8000 FlashCopy. At first I thought "Are you kidding me?!?!" However, this new license option allows the TS7650 appliance to compete with other virtual tape libraries (VTL) that do not offer deduplication capability on an even playing field. It also allows TS7650 to be used for data that doesn'tdedupe very well, such as seismic recordings, satellite images, or what have you. There are also clients who do not yet feel comfortable to dedupe their financial records for compliance reasons.This option now allows IBM to withdraw from marketing the TS7530 non-dedupe library. Having one technology thatdoes both dedupe and no-dedupe is better than offering two separate libraries based on different technologies.|
The ProtecTIER series also announced [IP remote distance replication]. This can be used to replicate virtualtape cartridges in one ProtecTIER over to another ProtecTIER at a remote location. You can decide to replicateall or just a subset of your virtual tapes, and this feature can be used to migrate, merge or split ProtecTIERconfigurations as your needs grow. Before this support, our TS7650G clients replicated the disk repositoryusing native disk array replication technology, such as Global Mirror on the DS8000, but that meant that all data was replicated over to the secondary site. Now, with this new IP replication feature, you can be selective, and replicate only those virtual tapes that are mission critical.
The appliance now supports up to 36TB of disk capacity, and the new "IBM i" operating system on System i servers,formerly known as i5/OS.
- GPFS does Windows
IBM's General Parallel File System (GPFS) has the lion's marketshare of file systems used in the [Top 500 Supercomputers]. For a while, it was limited to just Linux and AIX operating system support, but version 3.3 [extends this to Windows 2008 on 64-bit architectures]. GPFS isthe file system used in IBM's Scale-Out File Services, the underlying technology of IBM's Cloud Computing and Storage offerings.
To learn more, here is the IBM[Press Release] and[Webcast].
technorati tags: IBM, DS8000, thin provisioning, Linux, UNIX, Windows, zHPF, z/OS, XIV, SMI-S, asynchronous mirroring, TSM, LDAP, SVC, TS7650, deduplication, dedupe, replication, GPFS, supercomputers, cloud computing, cloud storage, burning man
Well, it's Tuesday again, and that means more announcements from IBM!
In conjunction with IBM's new [System z10 Business Class (BC)] mainframe designed for Small and Medium-sized Businesses (SMB), IBM also announced related storage productenhancements.
- DS6000 series
Yes, it's alive! Contrary to the FUD you might have read from our competitors, IBM continues to sell thousands and thousands of IBM System Storage DS6800 disk systems, and now enhances them with the optionfor 450GB 15K RPM drives. What is nice about these 450GB drives is that they are as fast or faster* than 300GBdrives, so the typical trade-off between performance and capacity do not apply.
(* I compared Seagate 15.6K (450GB) with 15.5K (300GB) models.
|450GB drives||300GB drives|
|Avg Seek time (Read)||3.4ms||3.5 ms|
|Avg Seek time (Write)||3.9ms||4.0 ms|
|Full Seek time (Read)||6.43ms||6.7 ms|
|Full Seek time (Write)||7.12ms||7.4 ms|
|Sustained Bandwidth||112-171 MB/sec||73-125 MB/sec|
This may or may not result in application performance improvements, depending on workload pattern. Your mileage may vary.)
Our clients report back that these are incredibly stable systems that they don't have toworry about. This enhancement applies to both the [511/EX1 models] and [522/EX2 models].
- DS8000 series
Understanding that clients want complete solutions from single vendors, IBM offers synergy between System z and the IBM System Storage DS8000 disk systems. The latest R4.1 microcode upgrade offers two key features onthe various models [2107,
2421, 2422, 2423, and 2424].
- zHPF - High Performance FICON for System z. IBM was able to increase the throughput on 4 Gbps links. For OLTP workloads randomly accessing 4KB blocks, IBM internal tests showed zHPF doubled performance from 13,000 IOPSto 26,000 IOPS per channel. For sequential workloads, such as batch processing, zHPF increased performance 50 percent, from 350 MB/sec to 525 MB/sec.
- In February, IBM previewed[IncrementalResync] for z/OS Metro Global Mirror. However, some concepts are better explained with pictures.
One way to set up a 3-site disaster recovery protection is to have your production synchronously mirrored to a second site nearby, and at the same time asynchronously mirrored to a remote location. On the System z, you can have site "A" using synchronous IBM System Storage Metro Mirror over to nearby site "B", and also have site "A" sending data over to site "C" asynchronously using z/OS Global Mirror. This is called "z/OS Metro Global Mirror".
In the past, if the disk system in site A failed, you would switch over to site B, which would have to resend send all the data again to site C to be resynchronized. This is because site B was not tracking what the System Data Mover (SDM) reader had or had not yet processed.
With DS8000 4.1, the "incremental resync" function that, along with using IBM HyperSwap, requires site B to only send and resync the data that was in-flight when the outage occurred. When you compare the difference in sending this limited amount of in-flight data with the traditional complete volume of data, you can see how "Incremental Resync" can resynchronize the data 95% faster, and also greatly decrease your bandwidth requirements. This reduces the risk in case a subsequent outage occurs.
- TS7700 series
Introduced originally in 1997 as the IBM Virtual Tape Server (VTS), the [IBMSystem Storage TS7700] series supports Grid capabilityto replicate tape image data across locations. Here's a quick recap of today's announcement:
- Existing TS7740 can be upgraded up to 9TB of disk cache. New models can have up to 13TB of disk cache.
- A new "tape-less" TS7720 that has up to 70TB of disk cache.
- Integrate Library Management support. I discussed[IntegratedRemovable Media Manager (IRMM)] before, and this is basically IRMM inside. For those with TS3500 tape libraries,this support eliminates the need for a separate IBM 3953 L05 Library Manager.
- TS1130 back-end tape drive support. These are the fastest 1TB drives in the industry, with support of built-in encryption, and now can be used asthe physical tape back-end for the virtual tape TS7740 repository.
While our competitors might be boarding up their windows in preparation for the economic downturn in the USAeconomy, IBM remains generating solid results. San Jose Mercury News has an article that discusses this titled[IBM's 3Q profit strong on global sales].There has never been a better time to buy from, or invest in, IBM!
technorati tags: IBM, z10 BC, mainframe, SMB, DS6000, DS6800, 450GB, 15K, RPM, FUD, DS8100, DS8300, DS8000, zHPF, FICON, Incremental Resync, z/OS, MGM, HyperSwap, VTS, TS7700, TS7740, TS7720, tape-less, IRMM, TS1130, encryption, Mercury News, 3Q08, profit
Well, it's Tuesday again, and that means IBM announcements! Right on the heels of our big storage launch on February 9, today IBM announced some exciting options for its modular disk systems. Let's take a look:
- 2TB SATA-II drives
That's right, you can now DOUBLE your capacity with 2TB SATA type-II drives on the DS3950, DS4200, DS4700, DS5020, DS5100 and DS5300 disk controllers, as well as the DS4000 EXP420, EXP520, EXP810, EXP5000 and EXP5060 expansion drawers. Here are the Announcement Letters for the [HVEC] and [AAS] ordering systems.
- 300GB Solid State Drives
IBM also announces 300GB solid state drives (SSD) for the DS5100 and DS5300. These are four times larger than the 73GB drives IBM offered last year, for those workloads that need high read IOPS such as Online Transaction Processing (OLTP) and Enterprise Resource Planning (ERP) applications. Here is the [Announcement Letter].
- New N series model N3400
For customers that need less than the minimum 21TB that our IBM Scale-Out Network Attach Storage (SONAS) can provide, IBM offers the new N3400 unified storage disk system, with support for NFS, CIFS, iSCSI and FCP. This is a 2U high 12 drive model that can be expanded up to 136 drives, basically doubling all the stats from last year's N3300 model. Fellow blogger, Rich Swain (IBM), does a great job recapping the speeds and feeds over on his blog [News and Information about IBM N series].
It also appears that the reports and rumors of the death of the DS6800 are premature. Don't believe misleading statements from competitors, such as those found written by fellow blogger BarryB (EMC), aka "the Storage Anarchist", in his latest post [Bring Out Your Dead] showing a cute little tombstone with "Feb 2010" on the bottom. Actually, if he had bothered to read IBM's [Announcement Letter], he would have realized that IBM plans to continue to sell these until June. Of course, IBM will continue to support both new and existing DS6800 customers for many years to come.
Technically, BarryB does not make any factually incorrect statements for me to correct on his blog. The idea that a product is "dead" is, of course, just opinion, and competitors poke fun at each others' announcements every day. One could argue that the EMC V-Max was "dead" after the ITG whitepaper [Cost/Benefit Case for IBM XIV Storage System - Comparing Costs for IBM XIV and EMC V-Max Systems] demonstrated that the IBM XIV cost 63 percent less than a comparable EMC V-Max over the life of three years total cost of ownership (TCO) back in July 2009. The comparison was made with data from clients in a variety of industries including manufacturing, health care, life sciences, telecommunications, financial services, and the public sector. This could explain why so many EMC customers are buying or investigating the IBM XIV and the rest of the IBM storage portfolio.
technorati tags: announcements
, Barry Burke
Yesterday, IBM announced a variety of new storage offerings. Our theme this time around was "Policies and Performance". Here's a quick recap.
- N series
IBM offers new appliance and gateway models of its popular "unified storage" IBM System Storage N series disk systems.The N5300 appliance has two models. A10 for the single-controller, and A20 for the dual-controller model. The N5600 gateway also has two models. G10 for the single-controller, and G20 for the dual-controller model.A new EXN4000 disk expansion drawer is 3U high, and can hold up to 14 disks. It can support 1Gbps, 2Gpbs and 4Gpbs speeds.In addition to all this new "performance", we offer a new "policy" called the Advanced Single Instance Storage feature for the N5000 and N7000 series, which provides de-duplication at the block level. This can be particularly useful if you are using your N series for e-mail, document publishing, databases, backups or archives.
- SAN Volume Controller
A technology refresh with the new 8G4 model. Like its predecessor, the 8F4, this new model has 8GB of cache per node, and is fitted with 4Gpbs SAN attachment ports. The difference is that the 8G4 is based on our successfulIBM System x3550 server.This baby screams, so I look forward to seeing the updated SPC-1 and SPC-2 performance benchmark ratings.The new SVC 4.2 software provides additional authentication policies for more granular administration support, andmulti-destination FlashCopy (one source copied to up to 16 destination copies at the same time).
- DS8000 Scalability
The DS8000 series now supports having third and fourth expansion frames. This was actually already available via RPQ, but now it can be directly ordered.This means that you can now hold up to half a Petabyte in a single disk system.
- Productivity Center
IBM TotalStorage Productivity Center v3.3 offers policy and performance-based guidance in configuring disk system volumes, specification of paths between hosts and disk systems during storage provisioning, policy-based specification of zone membership, configuration analysis capabilities, configuration change management, extended tape management, and both content-sensitive and scalable enterprise-wide reports. There is also a version specifically designedto manage disk replication on System z platforms.
- Deep Computing Storage
The IBM System Storage DCS9550 Storage System comes in a 4U controller and 3U disk expansion drawers. It is designed for High Performance Computing (HPC) such as genome medical research, government research and rich media applications.
Our clients tell us they need performance to meet their dynamic business demands, and policies to help them manage the ever growing size of their storage infrastructure. We listened!
technorati tags: IBM, disk, storage, system, May, 2007, announcement, N5300, N5600, Advanced Single Instance Storage, EXN4000, DS8000, SAN Volume Controller, DCS9550, TotalStorage, Productivity Center, System z, Replication, FlashCopy, SVC, policy, performance, HPC, genome, research, rich media
Well, it's Tuesday again, and that means more IBM announcements!
- Storage Area Network (SAN)
IBM and Cisco announced [three new blades] for the Cisco MDS 9500 seriesdirectors: 24-port 8 Gbps, 48-port 8 Gbps, and 4/44 blended. The 4/44blended has 4 of the faster 8 Gbps ports, and 44 of the 4 Gpbs ports,so that you can auto-negotiate down to 1 Gbps for your older gear, andstill take advantage of the faster 8 Gbps speeds during the transition.
On the Brocade side, IBM announced the newIBM System Storage Data Center Fabric Manager [DCFM] V10 software. This replaces the products formerly known as BrocadeFabric Manager and McData Enterprise Fabric Connection Manager (EFCM).This software can support up to 24 distinct fabrics, up to 9000 ports,including a mix of FCP, FICON, FCIP and iSCSI protocols.
And if you need help setting up your SAN, IBM has recently renamed itsservices, formerly known as "IBM Implementation Services for SAN fabric components" to ["IBM Storage and Data Product Services - IBM Implementation Services for storage software - SAN fabric components"]. There is no change to the services actually provided, which have been available since 2003, but IBM felt that renaming it would make good press coverage.
(On a related note, I heard that Microsoft is planning to rename "Windows Vista" to "Windows 7" next year! Like we say here in Tucson,if it ends in "-ista" it is going to fail in the marketplace! Perhaps EMC should rename their storage virtualization product to "In-7"?).
- IBM System Storage DR550
IBM announced today that it now supports [RAID 6 onthe DR550] compliance and retention storage system.
There are a few RAID-5 based EMC Centera customers out there who have notyet switched over to the IBM DR550, and now this might be just the littlenudge they need. For long-term retention of regulatory compliance data,RAID-5 doesn't cut it, you need an advanced RAID scheme, such as RAID-6, RAID-DP or RAID-X.
The DR550 provides non-erasable, non-rewriteable (NENR) storage supportto keep retention-managed data on disk and tape media. It supports 1 TBSATA disk drives and 1TB tape cartridges to provide high capacity at lowcost and "green" low energy consumption.
- IBM System Storage N series
Several of our disk systems got improved and enhanced. Let's start withthe IBM System Storage N series[hardware and software] enhancements. IBM now offers high-speed 450GB 15K RPM drives. These are Fibre Channel (FC) drives for the EXN4000 expansion drawers, and Serial Attached SCSI (SAS) drives for the entry-levelN3300 and N3600 models.
The "gateway" models now support a variety of functions that were formerlyonly available on the appliance models. This includes Advanced Single Instance Storage (A-SIS), Disk Sanitization, and FlexScale.
A-SIS is IBM's "other" deduplication function, and I talked about this in my post [A-SIS Storage Savings Estimator Tool]. Disk Sanitization will physicallywrite ones and zeros over existing data to eliminate it, what IBM sometimes calls "Data Shredding".
The last feature, FlexScale, might be new for many. It is software toenable to use of the "Performance Accelerator Module" (PAM). The PAM isa PCI-Express card with 16GB on-board RAM that acts as a secondary cachebehind main memory of the N series controller. Depending on the model,you can have one to five of these cards fit into the controller itself,boosting random read performance, metadata access, and write block destage.
- IBM System Storage DS5000
IBM's latest entry into the DS family has been hugely successful.In addition to Linux, Windows and AIX, the DS5000 now supports [Novell Netware and Sun Solaris] operating systems.
For infrastructure management, IBM has enhanced the Remote Support Manager [RSM]that supports DS3000 and DS4000 has been extended to support DS5000 as well. This software can monitor up to 50 disk systems, will e-mail alerts to IBM when something goes wrong, and allow IBM to dial in via modem to get more diagnostic information to improve service to the client. Also, the IBM System Storage Productivity Center [SSPC]which now supports the DS8000 and SAN Volume Controller (SVC) has been extended to also support the DS5000.
- IBM XIV Storage System
In addition to 1-year and 3-year maintenance agreements, IBM now offers[2-year, 4-year and 5-year] software maintenance agreements.
- RFID labels for IBM tape media
IBM 3589 (20-pack of LTO cartridges) and IBM 3599 (20-pack of 3592 cartridges for TS1100 series)now offer [RFID labels]. These labels match the volume serial (VOLSER) with a 216-bit unique identifier and 256 bits of user-defined content. This can help with tape inventory,and to prevent people from walking out of the building with a tape cartridge stuffed in their jacket.
- 32GB memory stick
While not technically part of the IBM System Storage matrix of offerings, Lenovo announced their new[Essential Memory Key] which holds 32GB of memory and workswith both USB 1.1 and USB 2.0 protocols.
I wish I could say this is it for the IBM announcements for October, given that this is the last Tuesday of the month, but there are three days left, so there might be just a few more!
technorati tags: IBM, SAN, Cisco, MDS9500, DCFM, BFM, EFCM, FCP, FICON, FCIP, iSCSI, Windows Vista, Windows 7, EMC, Centera, DR550, RAID-6, RAID-DP, RAID-X, NENR, FC, EXN4000, SAS, N3300, N3600, A-SIS, Disk Sanitization, FlexScale, PAM, DS5000, Netware, Solaris, DS3000, DS4000, DS8000, SVC, XIV, RFID, 3589, 3599, LTO, 3592, tape, cartridges, VOLSER
It's official! My "blook" Inside System Storage - Volume I
is now available.
|This blog-based book, or “blook”, comprises the first twelve months of posts from this Inside System Storage blog,165 posts in all, from September 1, 2006 to August 31, 2007. Foreword by Jennifer Jones. 404 pages.|
- IT storage and storage networking concepts
- IBM strategy, hardware, software and services
- Disk systems, Tape systems, and storage networking
- Storage and infrastructure management software
- Second Life, Facebook, and other Web 2.0 platforms
- IBM’s many alliances, partners and competitors
- How IT storage impacts society and industry
You can choose between hardcover (with dust jacket) or paperback versions:
This is not the first time I've been published. I have authored articles for storage industry magazines, written large sections of IBM publications and manuals, submitted presentations and whitepapers to conference proceedings, and even had a short story published with illustrations by the famous cartoon writer[Ted Rall].
But I can say this is my first blook, and as far as I can tell, the first blook from IBM's many bloggers on DeveloperWorks, and the first blook about the IT storage industry.I got the idea when I saw [Lulu Publishing] run a "blook" contest. The Lulu Blooker Prize is the world's first literary prize devoted to "blooks"--books based on blogs or other websites, including webcomics. The [Lulu Blooker Blog] lists past year winners. Lulu is one of the new innovative "print-on-demand" publishers. Rather than printing hundredsor thousands of books in advance, as other publishers require, Lulu doesn't print them until you order them.
I considered cute titles like A Year of Living Dangerously, orAn Engineer in Marketing La-La land, or Around the World in 165 Posts, but settled on a title that matched closely the name of the blog.
In addition to my blog posts, I provide additional insights and behind-the-scenes commentary. If you go to the Luluwebsite above, you can preview an entire chapter in its entirety before purchase. I have added a hefty 56-page Glossary of Acronyms and Terms (GOAT) with over 900 storage-related terms defined, which also doubles as an index back to the post (or posts) that use or further explain each term.
So who might be interested in this blook?
- Business Partners and Sales Reps looking to give a nice gift to their best clients and colleagues
- Managers looking to reward early-tenure employees and retain the best talent
- IT specialists and technicians wanting a marketing perspective of the storage industry
- Mentors interested in providing motivation and encouragement to their proteges
- Educators looking to provide books for their classroom or library collection
- Authors looking to write a blook themselves, to see how to format and structure a finished product
- Marketing personnel that want to better understand Web 2.0, Second Life and social networking
- Analysts and journalists looking to understand how storage impacts the IT industry, and society overall
- College graduates and others interested in a career as a storage administrator
And yes, according to Lulu, if you order soon, you can have it by December 25.
technorati tags: IBM, blook, Volume I, Jennifer Jones, system, storage, strategy, hardware, software, services, disk, tape, networking, SAN, secondlife, Web2.0, facebook, Lulu, publishing, Blooker Prize, articles, magazines, proceedings, Ted Rall, insights, glossary, early-tenure, mentors, library, classroom, administrator, print, publish, on demand
IBM had some big announcements today. The theme for today's announcement was "Protected Information", as there are many reasons to protect your most strategic asset, your information. Let's do a quick run-down of a few of them.
- IBM LTO generation 4
LTO 4 provides encryption at the drive level, and supports WORM cartridges similar to LTO 3. It continues the LTO consortium's strategy for higher capacity and faster performance. If you have LTO 1 or LTO 2, now is a good time to consider upgrading your tape technology. The combination of encryption and WORM protects your information against unauthorized access, and unethical tampering of the data. The support is from our largest automated tapelibrary (TS3500),to our smallest drives.
- TS7520 Virtualization Engine
The TS7520replaces the TS7510, providing enhanced Virtual Tape Library (VTL) capability. When you hear "storage virtualization" you often think disk, but IBM invented "tape storage virtualization" and this product continues that leadership.
- Support for Half-high LTO 3 drives
The TS3100 and TS3200 now support half-high LTO 3 drives, which means you can have twice the number of drives in each unit. LTO 4 drives can read and write to LTO 3 media, so this provides additional investment protection.
- IBM System Storage DR550 File System Gateway
This new offering provides much-needed CIFS and NFS access to the DR550, the worlds most flexible compliance-and-retention storage available. Already there is a large body of ISVs that support the DR550 today, and with this new gateway, the list is even longer. The DR550 provides encryption for both disk and tape data, as well as policy-based non-erasable, non-rewriteable enforcement, designed for compliance with government regulations like Sarbanes-Oxley Act, HIPAA, and many others.
- IBM System Storage SAN32B-3 switch
This is the first major deliverable from Brocade since their acquisition of McDATA. A powerful switch packs 4 Gbps support in a small 1U form factor. Start with 16 ports, then add in increments of 8 ports to a maximum of 32 ports.
I've provided all the links, so that you can delve deeply into all the data sheets.
technorati tags: IBM, Tape, TS3500, TS3310, TS3200, TS3100, TS7520, LTO4, LTO3, CIFS,NFS,LTO, Linear Tape Open, DR550, File System Gateway, SAN, switch, SAN32B-3, System Storage, SOX, HIPAA, compliance, regulation, compliance, archiving, retention
Wrapping up my week on the Feb 12 announcements, I will finish off talking about thenew Half-High (HH) LTO4 drives available for our TS3100 and TS3200 tape libraries.
Small and medium sized business (SMB) clients are looking for small, affordable tapesystems. Tape is inherently green, using orders of magnitude less energy than disk,and is very scalable by simply purchasing more tape cartridges.
|When IBM first announced them, the TS3100 supported one drive with 24 cartridges,and the TS3200 (see picture at left) supported two drives and 48 cartridges. Unlike disk, that mentions RAWcapacity and then lowers it to indicate usable capacity in RAID configurations, tapeis just the opposite. LTO4 cartridges have 800 GB raw capacity, but with an average of 2:1compression, can hold a usable 1.6 TB of data. LTO4 also supports WORM cartridges fornon-erasable, non-rewriteable (NENR) types of data, and encryption capability.|
As a follow-on to our HH LTO3 drives, IBM is the first major storage vendor to offerthe new HH LTO4 drives in entry-level automation, which directly attach via 3Gbps SAS connections to your host servers. The HH models allows you to have two drives in the TS3100, and four drives in the TS3200.
You can mix and match, LTO3 and LTO4. Why would anyone do that? Well, the Linear Tape Open [LTO]consortium --made up of technology provider companies IBM, HP and Quantum--decided to support N-2 generation read, and N-1 generation read/write. So, anLTO3 can read LTO1 cartridges, and read/write LTO2 and LTO3 cartridges. TheLTO4 can read LTO2 cartridges, and read/write LTO3 and LTO4 cartridges. For SMBcustomers that still have some LTO1 cartridges they might want to read some day,mixing LTO3 and LTO4 is a viable combination.
Of course, IBM still offers full-high (FH) versions of LTO3 and LTO4, which offer a bit faster acceleration, back-hitch and rewind times than their HH counterparts, and also offer additional attachment choices of LVD Ultra160 SCSIand 4 Gbps Fibre Channel as well.
So, for SMB customers that are simply using their tape for backup and archive,and probably not driving maximum rated speeds, having twice as many slowerdrives might be just the right fit.
For more information on IBM's Feb. 12 announcement, see the[IBM Press Release].
technorati tags: IBM, HH, LTO3, LTO4, TS3100, TS3200, SMB, WORM, NENR, FH, LVD, Ultra160, SCSI
Well, it's Tuesday, and more IBM announcements were made today. Many of my colleagues are in Dallas, Texas for the[Storage Networking World conference
], and hopefully I will get some feedback from them before the week is over.
Today, IBM made announcements for Storage Area Networking (SAN) gear and disk systems.
- 8 Gbps Longwave transceivers
IBM now offers 8 Gbps Longwave SFP transceivers on the[IBM System Storage SAN256B and SAN768B] directors, as well as the IBM System Storage SAN24B-4 Express, SAN40B-4, and SAN80B-4 switches (orderable as [machine type models] or [partnumbers] ).These transceivers support single mode fiber up to 10km in distance, comparedto the 50-75 meters supported by the Shortwave SFP transceivers.
Like theShortwave SFP transceivers we already have available, these Longwave transceivers have "N-2" support, which means they can support two generations back: auto-negotiate down to 4 Gbps and 2 Gbps speeds. If you still have 1 Gbps equipment, now is a good time to consider upgrading those, or keep a few 4 Gbps ports available that can auto-negotiate down to 1 Gbps speed.
- FICON Accelerator
Mainframe clients that sent data to a remote Business Continuity/Disaster Recovery (BC/DR) location often used "channel extenders", which were special boxes used to minimize performance delays when transmitting FICON across long distances. This was especially helpful for z/OS Global Mirror (what we used to call XRC) as well as electronic vaulting to tape.
Now, this functionality can be part of the directors and routers, eliminating the need for separate equipment.This is available for the SAN768B and SAN256B directors, as well as SAN18B-R and SAN04B-R routers.
Before the merger between Brocade and McDATA, IBM offered SAN18B-R routers from Brocade, and SAN04M-R routers from McDATA. The former had 16 Fibre Channel (FC) ports and two Ethernet ports, and the latter was less expensive with just four ports.Brocade came up with a clever replacement for both. The [IBMSystem Storage SAN04B-R] router comes by default withtwo active FC ports and two Ethernet ports, but also with 14 additional FC ports inactive. A "High Performance Extension" feature activates these additional ports, bringing the SAN04B-R up to the SAN18B-R level, and allows it to support the FICON Accelerator feature above.
So, instead of having specialized channel extenders at both primary and secondary sites, you can havea director with FICON Accelerator at the primary site, sending FICON over Ethernet to a 1U-high router (also running the FICON Accelerator) at the secondary site, whichcan greatly reduce costs. The FICON Accelerator can in some cases double the amount of data transfer throughput,but of course, your mileage may vary.
- DS3000 series
On the disk side, the [IBMSystem Storage DS3000 series] disk systems have been enhanced, withsupport for 450GB high-speed 15K RPM SAS drives, RAID-6 double-drive protection, more FlashCopy point-in-time copies,and more partitions.On the DS3000, "storage partitions" is what the rest of the industry calls "LUN masking". A storage partition allowsyou to isolate a set of LUNs to only be seen by a single host server, or host cluster that shares the same set ofLUNs. Some clients felt that the default of four partitions was too low, so now up to 32 partitions can be configured.(This is not to be confused with "Logical Partitions" that isolate processor and cache resources available on theIBM System Storage DS8000 and other high-end storage disk systems.)
IBM also extended the Operating System support.The DS3000 series now supports Solaris, either on x86 or SPARC-based servers. The DS3300 iSCSI support now supportsLinux on POWER. The DS3400 allows support of IBM i (the new name for i5/OS V6R1) through the VIOS feature.
The [IBMSystem Storage DCS9900] is a bigger, faster version of the DCS9550. Like the DCS9550, the DCS9900 is designedfor high performance computing (HPC) workloads. The DCS9550 supported up to 960TB in two frames, with 2.8 GB/sec throughput,and an optional disk spin-down capability.The new DCS9900 can support up to 1.2 PB in two frames, with 5.6 GB/sec throughput, but no spin-down capability.
So whether your data center is filled with System z mainframes, or other open systems, IBM has a solution for you.
technorati tags: IBM, SNW, SAN, disk, storage, system, Shortwave, Longwave, SFP, transceiver, SAN256B, SAN768B, directors, SAN18B-R, SAN04B-R, routers, SAN24B-4, Express, SAN40B-4, SAN80B-4, switches, FICON Accelerator, Brocade, McDATA, Fibre Channel, FC, FCP, FICON, z/OS, XRC, channel extender, DS3000, DS3300, DS3400, Ethernet, iSCSI, SAS, RAID-6, Linux on POWER, Solaris, IBM i, i5/OS, VIOS, DCS9900, DCS9550, HPC
Lakota Industries made news with the introduction of its [Sarah-Cuda Hunting Bow
], named after moose-huntingU.S. Vice President nominee and Governor of Alaska [Sarah Palin
]. This has all the same features as their other high-end hunting bows, but is lighter, smaller and available in Pink Camo. This "pink-it-and-shrink-it" move was designed to broaden the market share of hunting bows by reaching out to the needs of women hunters.
Not to be outdone, today, at the Storage Networking World Conference, IBM announced the new IBM System Storage SAN Volume Controller Entry Edition [SVC EE].
|The new SVC Entry Edition, available in Flamingo Pink* or traditional Raven Black.|
* RPQ required. Default color is Raven Black.
You might be thinking: "Wait! IBM SVC is already the leading storage virtualization product among SMB clients today,why introduce a less expensive model?" With the global economy in the tank, IBM thought it would be nice to help outour smaller SMB clients with this new option.
This new offering is actually a combination of new software (SVC 4.3.1) and new hardware (2145-8A4). Here are thekey differences:
|SVC Classic||SVC EE|
|Licensing||by usable capacity managed, up to 8 PB||by number of disk drives, up to 60 drives|
|Hardware||2145-4F2, 8F2, 8F4, 8G4, 8A4||2145-8A4|
|Cluster size||1, 2, 3 or 4 node-pairs, depending on performance requirements||only one node-pair needed|
|Copy Services||FlashCopy, Metro Mirror and Global Mirror, licensed by subset of capacity used||FlashCopy, Metro Mirror and Global Mirror, but with simplified licensing|
The SVC EE is not a "dumbed-down" version of the SVC Classic. It has all the features and functions of theSVC Classic, including thin provisioning with "Space-efficient volumes", Quality of Service (QoS) performance prioritization for more important applications, point-in-time FlashCopy, and both synchronous and asynchronous disk mirroring (Metro and Global Mirror).
While IBM has not yet have SPC-1 benchmarks published, IBM is positioning the SVC EE as roughly 60 percent of the performance, at 60 percent of the list price, compared to a comparable SVC Classic 2145-8G4 configuration. The SVC Classic is already one of the fastest disk systems in the industry. By comparison, the SVC EE is twice as fast as the original SVC 2145-4F2 introduced five years ago.If you outgrow the SVC EE, no problem! The 2145-8A4 can be used in traditional SVC Classic mode, and the SVC EE software can be converted into the SVC Classic software license for upgrade purposes, protecting your originalinvestment!
For those considering an HP EVA 4400 or EMC CX-4 disk system, you might want to look at combining an SVC EE with [IBM System Storage DS3400] disk. The combination offers more features and capabilities, and helps reduce your IT costs at the same time.
And if you are worried you can't afford it right now, IBM Global Financing is offering a ["Why Wait?" world-wide deferral of interest and payments] for 90 days, so you don't have to make your first payment until 2009, applicable to all IBM System Storage products, including the SVC EE, SVC Classic and DS3400 disk systems.
You can read more details on fellow blogger Barry Whyte's[Storage Virtualization] blog.
technorati tags: IBM, SVC, SVC EE, SVC Classic, Lakota Industries, Sarah-Cuda, Sarah Palin, Flamingo Pink, Raven Black, RPQ, SPC-1, 2145-8A4, DS4300, IBM Global Financing, Why Wait, FlashCopy, Metro Mirror, Global Mirorr, Barry Whyte
When times are tough, people revert back to their "default programming", and companies search for their"core strengths".The Redwoods Group calls this the[Native Language Theory
]. Here'san excerpt:
A young carpenter immigrates to the United States from Italy, unable to speak a word of English. Upon arrival, he moves into a small apartment by himself and begins looking for a job in construction. With some luck and a lot of hard work, he quickly lands a job at a local construction site. Over the coming weeks he learns how to say “hello” and “goodbye” to his English-only coworkers. As time goes on, he is able to learn more complex phrases and commands and is now able to begin taking on jobs that better match his level of expertise.
Several years after the carpenter moved to the US, he now speaks fluent English and has started a family with an American woman and now speaks only English on the job site and at home. One afternoon, while hammering at the framing of a new home, the carpenter strikes his thumb. In what language does he curse?Italian, of course.
We believe that this story illustrates the nature of reacting to difficult, stressful, and, yes, painful situations by reverting to what you know best. This is the reason that coaches ask their players to make certain actions “instinctual” – simply, when times get tough, we do what we fall back on our native language.
Last September, in my post[Supermarketsand Specialty Shops] I mentioned how Forrester Research identified two kinds of IT vendors selling storage. On one side were the"information infrastructure" companies (IBM, HP, Sun, and Dell) that focus on providing one-stop shopping for clients that want all parts of an IT solution, including servers, storage, software and services. These I compared to "supermarkets".
On the other side were the storage component vendors (EMC, HDS, NetApp, and many others) that focus on specificstorage components. These I compared to "specialty shops", like butchers, bakers and candlestick makers.These often appeal to customers with big enough IT staffs with the skills to do their own system integration.The key difference seems to be that the supermarkets are client-focused, and the specialty shops are technology-focused, and different people prefer to do business with one side or another.This came in handy last November to explain Dell's acquisition of EqualLogic and discuss[IBMEntry-Level iSCSI offerings].
Some recent news seems to fit this model, in relation to the Native Language Theory.
Several argued that EMC was in the process of shifting sides, from disk specialty shop over to an everything-but-servers supermarket. Certainly many of its acquisitions in software, services, and VMwarewould support the notion that perhaps they are going through an identity crisis.The immediate beneficiary was HDS, the #2 disk specialty shop, that passedup EMC with innovative features in its USP-V disk system.
However, times are tough, especially in the U.S. economy that many storage vendors are focused on. EMCappears to have found its native language, going back to its roots of solid state storage systems thatthey started with back in 1979. This week EMC announced [Symmetrix DMX-4 support of Flash drives].Several bloggers review the technology involved:
Overall smart move for EMC to go back to its technology-focused disk specialty shop mode and go head-to-head against the HDS threat. With Web 2.0 workloads moving off these monolithic solutions and onto [clustered storage more appropriate for "cloud computing"], large enterprise-class disk systems like theIBM System Storage DS8000 and EMC DMX-4 can shift focus on what they do best: online transaction processing (OLTP) and large databases. However,I noticed the EMC press release mentions EMC as an "information infrastructure" company, so perhaps they stillhaven't resolved their identity crisis.
(For the record, IBM shipped [Flash drive-based storage last year], and announced [larger drive models] this week. As we have learned from last year, terms like "First" or "Leader" in corporate press releases should not always be taken literally.)
- Sun Microsystems
After Sun acquired StorageTek specialty shop, they too had a bit of an identity crisis.Fortunately, they realized their core strengths were on the "supermarket" side,moved storage in with servers in their latest restructuring, changed their NYSE symbol from SUNW to JAVA, and reset their focus on providing end-to-end solutions like IBM. For example, fellow blogger Taylor Allis from Sun mentions their latest in "clustered storage" in his post[IBM Buys XIV - Good Move].
Last August, in my post [Fundamental Changes for Green Data Centers], I mentioned that IBM consolidated 3900 rack-optimized servers onto 33 mainframes,and that this was part of our announcement that[since 1997, IBM has consolidated its strategic worldwide data centers from 155 to seven].I noticed in Nick Carr's Rough Type blog post[The Network is the Data Center] thatHP and Sun have followed suit:
In an ironic twist, some of today's leading manufacturers of server computers are also among the companies moving most aggressively to reduce their need for servers and other hardware components. Hewlett-Packard, for instance, is in the midst of a project to slash the number of data centers it operates from 85 to 6 and to cut the number of servers it uses by 30 percent. Now, Sun Microsystems is upping the stakes. Brian Cinque, the data center architect in Sun's IT department, says the company's goal is to close down all its internal data centers by 2015. "Did I just say 0 data centers?" he writes on his blog."Yes! Our goal is to reduce our entire data center presence by 2015."
While Nick feels this is ironic for Sun, known for UNIX servers based on their SPARC chip technology, I don't. Sun has shifted from being technology-focused to being client-focused.This is where the marketplace is going, and the supermarket vendors, being client-focused, are best positioned to adapt to this new world. In a sense, Sun found its roots. Nick summarizes this as:"The network, to spin the old Sun slogan, becomes the data center."
So, each move seems to strengthen their respective identities back to their origins, or at least help them communicate that to the market.
technorati tags: core strengths, native language, Forrester Research, supermarket, specialty shops, IBM, HP, Sun, Dell, information infrastructure, client-focused, technology-focused, EqualLogic, EMC, HDS, NetApp, USP-V, DMX-4, Flash, disk, drive, systems, Java, Taylor Allis, UNIX, SPARC, Nick Carr
The TS3100 Tape Library
An astute reader brought this to my attention. The newest addition to our "IBM Express Portfolio"set of SMB-oriented offerings is the new TS3100 tape library. This has one LTO Gen 3 drive and up to 22 cartridges, which can be a mix of WORM and rewriteable cartridges,beautifully packaged in a small 2U high (3.5 inch) rack-mountable chassis. Each cartridge can hold up to 800GB uncompressed, or 1.6TB with typical 2-to-1 compression.
This tape library would be a great complement to TSM Express for backup, and to theDR550 Express for archive and compliance storage.
And now, for a limited time, there is a $1500 rebate, check website for details.
technorati tags: IBM, TS3100, Tape, Library, Express, Portfolio, WORM, LTO, LTO3, cartridge, Tivoli Storage Manager, TSM, DR550
It's Tuesday, and that means more IBM announcements!
I haven't even finished blogging about all the other stuff that got announced last week, and here we are with more announcements. Since IBM's big [Pulse 2010 Conference] is next week, I thought I would cover this week's announcement on Tivoli Storage Manager (TSM) v6.2 release. Here are the highlights:
- Client-Side Data Deduplication
This is sometimes referred to as "source-side" deduplication, as storage admins can get confused on which servers are clients in a TSM client-server deployment. The idea is to identify duplicates at the TSM client node, before sending to the TSM server. This is done at the block level, so even files that are similar but not identical, such as slight variations from a master copy, can benefit. The dedupe process is based on a shared index across all clients, and the TSM server, so if you have a file that is similar to a file on a different node, the duplicate blocks that are identical in both would be deduplicated.
This feature is available for both backup and archive data, and can also be useful for archives using the IBM System Storage Archive Manager (SSAM) v6.2 interface.
- Simplified management of Server virtualization
TSM 6.2 improves its support of VMware guests by adding auto-discovery. Now, when you spontaneously create a new virtual machine OS guest image, you won't have to tell TSM, it will discover this automatically! TSM's legendary support of VMware Consolidated Backup (VCB) now eliminates the manual process of keeping track of guest images. TSM also added support of the Vstorage API for file level backup and recovery.
While IBM is the #1 reseller of VMware, we also support other forms of server virtualization. In this release, IBM adds support for Microsoft Hyper-V, including support using Microsoft's Volume Shadow Copy Services (VSS).
- Automated Client Deployment
Do you have clients at all different levels of TSM backup-archive client code deployed all over the place? TSM v6.2 can upgrade these clients up to the latest client level automatically, using push technology, from any client running v5.4 and above. This can be scheduled so that only certain clients are upgraded at a time.
- Simultaneous Background Tasks
The TSM server has many background administrative tasks:
- Migration of data from one storage pool to another, based on policies, such as moving backups and archives on a disk pool over to a tape pools to make room for new incoming data.
- Storage pool backup, typically data on a disk pool is copied to a tape pool to be kept off-site.
- Copy active data. In TSM terminology, if you have multiple backup versions, the most recent version is called the active version, and the older versions are called inactive. TSM can copy just the active versions to a separate, smaller disk pool.
In previous releases, these were done one at a time, so it could make for a long service window. With TSM v6.2, these three tasks are now run simultaneously, in parallel, so that they all get done in less time, greatly reducing the server maintenance window, and freeing up tape drives for incoming backup and archive data. Often, the same file on a disk pool is going to be processed by two or more of these scheduled tasks, so it makes sense to read it once and do all the copies and migrations at one time while the data is in buffer memory.
- Enhanced Security during Data Transmission
Previous releases of TSM offered secure in-flight transmission of data for Windows and AIX clients. This security uses Secure Socket Layer (SSL) with 256-bit AES encryption. With TSM v6.2, this feature is expanded to support Linux, HP-UX and Solaris.
- Improved support for Enterprise Resource Planning (ERP) applications
I remember back when we used to call these TDPs (Tivoli Data Protectors). TSM for ERP allows backup of ERP applications, seemlessly integrating with database-specific tools like IBM DB2, Oracle RMAN, and SAP BR*Tools. This allows one-to-many and many-to-one configurations between SAP servers and TSM servers. In other words, you can have one SAP server backup to several TSM servers, or several SAP servers backup to a single TSM server. This is done by splitting up data bases into "sub-database objects", and then process each object separately. This can be extremely helpful if you have databases over 1TB in size. In the event that backing up an object fails and has to be re-started, it does not impact the backup of the other objects.
technorati tags: , announcements, IBM, Pulse, conference, TSM, Tivoli, SSAM, backup, archive, VMware, VCB, Hyper-V, Microsoft, SSL, AES, encryption, in-flight, Linux, HP-UX, Solaris, ERP, DB2, Oracle, RMAN, SAP, BR*Tools, ibm-pulse, pulse2010
Byte and Switch magazine published an article on Top Women in Storage
I thought of this as it was recently announced that Cindy Grossman, IBM VP of Tapeand Archive systems, will also serve as Site Level Manager for the IBM Tucson lab.
The motivation for the Byte and Switch article was probably from this article in Wall Street Journal detailingthe status of women in IT sales positions. Here is an excerpt:
Today, 13.5% of EMC's sales force is female, the company says, compared with 40% at International Business Machines Corp. and 29% at CA Inc., a big software vendor, those companies say. According to the 2000 U.S. census, about 25% of high-tech employees nationally were women.
IBM recognizes that diversity provides unique advantages in dealing with a global marketplace. Not only are women well represented on our IT sales force, they are also well represented on our board of directors, our Worldwide Management Committee, and our executive team overall, as well as in technical positions such as IBM Fellows, Distinguished Engineers, members of the IBM Academy of Technology. Working Mother magazine has rated IBM one of the top 10 "Best Companies" for women to work for in each of the 18 years that it has published this list.
In 2006, 51 camps called EXITE (Exploring Interests in Technology and Engineering) were held worldwide in 33 countries. The hope is to get young girls to pursue college degrees in computer science, math and engineering, so that they can then help fill the shortage of technical resources in IT.
So, if you are a women discouraged at your current place of employment, and are looking for exciting new opportunities in IT, come check out working for IBM![Read More]