Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Wrapping up my coverage of the annual [2010 System Storage Technical University], I attended what might be perhaps the best session of the conference. Jim Nolting, IBM Semiconductor Manufacturing Engineer, presented the new IBM zEnterprise mainframe, "A New Dimension in Computing", under the Federal track.
The zEnterprises debunks the "one processor fits all" myth. For some I/O-intensive workloads, the mainframe continues to be the most cost-effective platform. However, there are other workloads where a memory-rich Intel or AMD x86 instance might be the best fit, and yet other workloads where the high number of parallel threads of reduced instruction set computing [RISC] such as IBM's POWER7 processor is more cost-effective. The IBM zEnterprise combines all three processor types into a single system, so that you can now run each workload on the processor that is optimized for that workload.
IBM zEnterprise z196 Central Processing Complex (CPC)
Let's start with the new mainframe z196 central processing complex (CPC). Many thought this would be called the z11, but that didn't happen. Basically, the z196 machine has a maximum 96 cores versus z10's 64 core maximum, and each core runs 5.2GHz instead of z10's cores running at 4.7GHz. It is available in air-cooled and water-cooled models. The primary operating system that runs on this is called "z/OS", which when used with its integrated UNIX System Services subsystem, is fully UNIX-certified. The z196 server can also run z/VM, z/VSE, z/TPF and Linux on z, which is just Linux recompiled for the z/Architecture chip set. In my June 2008 post [Yes, Jon, there is a mainframe that can help replace 1500 servers], I mentioned the z10 mainframe had a top speed of nearly 30,000 MIPS (Million Instructions per Second). The new z196 machine can do 50,000 MIPS, a 60 percent increase!
The z196 runs a hypervisor called PR/SM that allows the box to be divided into dozens of logical partitions (LPAR), and the z/VM operating system can also act as a hypervisor running hundreds or thousands of guest OS images. Each core can be assigned a specialty engine "personality": GP for general processor, IFL for z/VM and Linux, zAAP for Java and XML processing, and zIIP for database, communications and remote disk mirroring. Like the z9 and z10, the z196 can attach to external disk and tape storage via ESCON, FICON or FCP protocols, and through NFS via 1GbE and 10GbE Ethernet.
IBM zEnterprise BladeCenter Extension (zBX)
There is a new frame called the zBX that basically holds two IBM BladeCenter chassis, each capable of 14 blades, so total of 28 blades per zBX frame. For now, only select blade servers are supported inside, but IBM plans to expand this to include more as testing continues. The POWER-based blades can run native AIX, IBM's other UNIX operating system, and the x86-based blades can run Linux-x86 workloads, for example. Each of these blade servers can run a single OS natively, or run a hypervisor to have multiple guest OS images. IBM plans to look into running other POWER and x86-based operating systems in the future.
If you are already familiar with IBM's BladeCenter, then you can skip this paragraph. Basically, you have a chassis that holds 14 blades connected to a "mid-plane". On the back of the chassis, you have hot-swappable modules that snap into the other side of the mid-plane. There are modules for FCP, FCoE and Ethernet connectivity, which allows blades to talk to each other, as well as external storage. BladeCenter Management modules serve as both the service processor as well as the keyboard, video and mouse Local Console Manager (LCM). All of the IBM storage options available to IBM BladeCenter apply to zBX as well.
Besides general purpose blades, IBM will offer "accelerator" blades that will offload work from the z196. For example, let's say an OLAP-style query is issued via SQL to DB2 on z/OS. In the process of parsing the complicated query, it creates a Materialized Query Table (MQT) to temporarily hold some data. This MQT contains just the columnar data required, which can then be transferred to a set of blade servers known as the Smart Analytics Optimizer (SAO), then processes the request and sends the results back. The Smart Analytics Optimizer comes in various sizes, from small (7 blades) to extra large (56 blades, 28 in each of two zBX frames). A 14-blade configuration can hold about 1TB of compressed DB2 data in memory for processing.
IBM zEnterprise Unified Resource Manager
You can have up to eight z196 machines and up to four zBX frames connected together into a monstrously large system. There are two internal networks. The Inter-ensemble data network (IEDN) is a 10GbE that connects all the OS images together, and can be further subdivided into separate virtual LANs (VLAN). The Inter-node management network (INMN) is a 1000 Mbps Base-T Ethernet that connects all the host servers together to be managed under a single pane of glass known as the Unified Resource Manager. It is based on IBM Systems Director.
By integrating service management, the Unified Resource Manager can handle Operations, Energy Management, Hypervisor Management, Virtual Server Lifecycle Management, Platform Performance Management, and Network Management, all from one place.
IBM Rational Developer for System z Unit Test (RDz)
But what about developers and testers, such as those Independent Software Vendors (ISV) that produce mainframe software. How can IBM make their lives easier?
Phil Smith on z/Journal provides a history of [IBM Mainframe Emulation]. Back in 2007, three emulation options were in use in various shops:
Open Mainframe, from Platform Solutions, Inc. (PSI)
FLEX-ES, from Fundamental Software, Inc.
Hercules, which is an open source package
None of these are viable options today. Nobody wanted to pay IBM for its Intellectual Property on the z/Architecture or license the use of the z/OS operating system. To fill the void, IBM put out an officially-supported emulation environment called IBM System z Professional Development Tool (zPDT) available to IBM employees, IBM Business Partners and ISVs that register through IBM Partnerworld. To help out developers and testers who work at clients that run mainframes, IBM now offers IBM Rational Developer for System z Unit Test, which is a modified version of zPDT that can run on a x86-based laptop or shared IBM System x server. Based on the open source [Eclipse IDE], the RDz emulates GP, IFL, zAAP and zIIP engines on a Linux-x86 base. A four-core x86 server can emulate a 3-engine mainframe.
With RDz, a developer can write code, compile and unit test all without consuming any mainframe MIPS. The interface is similar to Rational Application Developer (RAD), and so similar skills, tools and interfaces used to write Java, C/C++ and Fortran code can also be used for JCL, CICS, IMS, COBOL and PL/I on the mainframe. An IBM study ["Benchmarking IDE Efficiency"] found that developers using RDz were 30 percent more productive than using native z/OS ISPF. (I mention the use of RAD in my post [Three Things to do on the IBM Cloud]).
What does this all mean for the IT industry? First, the zEnterprise is perfectly positioned for [three-tier architecture] applications. A typical example could be a client-facing web-server on x86, talking to business logic running on POWER7, which in turn talks to database on z/OS in the z196 mainframe. Second, the zEnterprise is well-positioned for government agencies looking to modernize their operations and significantly reduce costs, corporations looking to consolidate data centers, and service providers looking to deploy public cloud offerings. Third, IBM storage is a great fit for the zEnterprise, with the IBM DS8000 series, XIV, SONAS and Information Archive accessible from both z196 and zBX servers.
This week, IBM celebrates its Centennial, 100 years since its incorporation on June 16, 1911.
A few months ago, the Tucson Executive Briefing Center ordered its latest IBM System Storage [DS8800] to be on display for demos. This was manufactured in Vác, Hungary (about an hour north of Budapest), and was going to be shipped over to the United States.
However, Sam Palmisano, IBM Chairman and CEO, was in Hannover, Germany for the [CeBIT conference] and wanted this DS8800 to be re-directed to Germany first for this event. He was kind enough to sign it for us. Brian Truskowski, IBM General Manager for Storage, and Rod Adkins, IBM Senior Vice President for IBM Systems Technolgoy Group (and my fifth-line manager), also signed this as well!
I am pleased to say this "signed" DS8000 has arrived to Tucson. This is the latest model in a family of market-leading high-end enterprise-class disk systems designed to attach to all computers, including System z mainframes, POWER systems running AIX and IBM i, as well as servers running HP-UX, Solaris, Linux or Windows.
For more on IBM's other innovations over the past 100 years, check out the [Icons of Progress], which includes these storage innovations:
Continuing my post-week coverage of the [Data Center 2010 conference], Wendesday afternoon included a mix of sessions that covered storage and servers.
Enabling 5x Storage Efficiency
Steve Kenniston, who now works for IBM from recent acquisition of Storwize Inc, presented IBM's new Real-Time Compression appliance. There are two appliances, one handles 1 GbE networks, and the other supports mixed 1GbE/10GbE connectivity. Files are compressed in real-time with no impact to performance, and in some cases can improve performance because there is less data written to back-end NAS devices. The appliance is not limited to IBM's N series and NetApp, but is vendor-agnostic. IBM is qualifying the solution with other NAS devices in the market. The compression can compress up to 80 percent, providing a 5x storage efficiency.
Townhall - Storage
The townhall was a Q&A session to ask the analysts their thoughts on Storage. Here I will present the answer from the analyst, and then my own commentary.
Are there any gotchas deploying Automated Storage Tiering?
Analyst: you need to fully understand your workload before investing any money into expensive Solid-State Drives (SSD).
Commentary: IBM offers Easy Tier for the IBM DS8000, SAN Volume Controller, and Storwize V7000 disk systems. Before buying any SSD, these systems will measure the workload activity and IBM offers the Storage Tier Advisory Tool (STAT) that can help identify how much SSD will benefit each workload. If you don't have these specific storage devices, IBM Tivoli Storage Productivity Center for Disk can help identify disk performance to determine if SSD is cost-justified.
Wouldn't it be simpler to just have separate storage arrays for different performance levels?
Analyst: No, because that would complicate BC/DR planning, as many storage devices do not coordinate consistency group processing from one array to another.
Commentary: IBM DS8000, SAN Volume Controller and Storwize V7000 disk systems support consistency groups across storage arrays, for those customers that want to take advantage of lower cost disk tiers on separate lower cost storage devices.
Can storage virtualization play a role in private cloud deployments?
Analyst: Yes, by definition, but today's storage virtualization products don't work with public cloud storage providers. None of the major public cloud providers use storage virtualization.
Commentary: IBM uses storage virtualization for its public cloud offerings, but the question was about private cloud deployments. IBM CloudBurst integrated private cloud stack supports the IBM SAN Volume Controller which makes it easy for storage to be provisioned in the self-service catalog.
Can you suggest one thing we can do Monday when we get back to the office?
Analyst: Create a team to develop a storage strategy and plan, based on input from your end-users.
Commentary: Put IBM on your short list for your next disk, tape or storage software purchase decision. Visit
[ibm.com/storage] to re-discover all of IBM's storage offerings.
What is the future of Fibre Channel?
Analyst 1: Fibre Channel is still growing, will go from 8Gbps to 16Gbps, the transition to Ethernet is slow, so FC will remain the dominant protocol through year 2014.
Analyst 2: Fibre Channel will still be around, but NAS, iSCSI and FCoE are all growing at a faster pace. Fibre Channel will only be dominant in the largest of data centers.
Commentary: Ask a vague question, get a vague answer. Fibre Channel will still be around for the next five years.
However, SAN administrators might want to investigate Ethernet-based approaches like NAS, iSCSI and FCoE where appropriate, and start beefing up their Ethernet skills.
Will Linux become the Next UNIX?
Linux in your datacenter is inevitable. In the past, Linux was limited to x86 architectures, and UNIX operating systems ran on specialized CPU architectures: IBM AIX on POWER7, Solaris on SPARC, HP-UX on PA-RISC and Itanium, and IBM z/OS on System z Architecture, to name a few. But today, Linux now runs on many of these other CPU chipsets as well.
Two common workloads, Web/App serving and DBMS, are shifting from UNIX to Linux. Linux Reliability, Availability and Serviceability (RAS) is approaching the levels of UNIX. Linux has been a mixed blessing for UNIX vendors, with x86 server margins shrinking, but the high-margin UNIX market has shrunk 25 percent in the past three years.
UNIX vendors must make the "mainframe argument" that their flavor of UNIX is more resilient than any OS that runs on Intel or AMD x86 chipsets. In 2008, Sun Solaris was the number #1 UNIX, but today, it is IBM AIX with 40 percent marketshare. Meanwhile HP has focused on extending its Windows/x86 lead with a partnership with Microsoft.
The analyst asks "Are the three UNIX vendors in it for the long haul, or are they planning graceful exits?" The four options for each vendor are:
Milk it as it declines
Accelerate the decline by focusing elsewhere
Impede the market to protect margins
Re-energize UNIX base through added value
Here is the analyst's view on each UNIX vendor.
IBM AIX now owns 40 percent marketshare of the UNIX market. While the POWER7 chipset supports multiple operating systems, IBM has not been able to get an ecosystem to adopt Linux-on-POWER. The "Other" includes z/OS, IBM i, and other x86-based OS.
HP has multi-OS Itanium from Intel, but is moving to Multi-OS blades instead. Their "x86 plus HP-UX" strategy is a two-pronged attack against IBM AIX and z/OS. Intel Nehalem chipset is approaching the RAS of Itanium, making the "mainframe argument" more difficult for HP-UX.
Before Oracle acquired Sun Microsystems, Oracle was focused on Linux as a UNIX replacement. After the acquisition, they now claim to support Linux and Solaris equally. They are now focused on trying to protect their rapidly declining install base by keeping IBM and HP out. They will work hard to differentiate Solaris as having "secret sauce" that is not in Linux. They will continue to compete head-on against Red Hat Linux.
An interactive poll of the audience indicated that the most strategic Linux/UNIX platform over the next next five years was Red Hat Linux. This beat out AIX, Solaris and HP-UX, as well as all of the other distributions of Linux.
The rooms emptied quickly after the last session, as everyone wanted to get to the "Hospitality Suites".
Continuing my coverage of last week's Data Center Conference 2009, held Dec 1-4 in Las Vegas, I attended an interesting session related to the battles between Linux, UNIX, Windows and other operating systems. Of course, it is no longer between general purpose operating systems, there are also thin appliances and "Meta OS" such as cloud or Real Time Infrastructure (RTI).
One big development is "context awareness". For the most part, Operating Systems assume they are one-to-one with the hardware they are running on, and Hypervisors like PowerVM, VMware, Xen and Hyper-V have worked by giving OS guests the appearance that this is the case. However, there is growing technology for OS guests to be "aware" they are running as guests, and to be aware of other guests running on the same Hypervisor.
The analyst divided up Operating Systems into three categories:
Operating systems that are typically used to support other OS by offering Web support or other infrastructure. Linux on POWER was an example given.
DBMS/Industry Vertical Applications
Operating systems that are strong for Data Base Management Systems (DBMS) and vertical industry applications. z/OS, AIX, HP-UX, HP NonStop, HP OpenVMS were given as examples.
General Purpose for a variety of applications
Operating systems that can run a range of applications, from Web/Infrastructure, DBMS/Vertical Apps, to others. Windows, Linux x86 and Solaris were offered as examples.
The analyst indicated that what really drove the acceptance or decline of Operating Systems were the applications available. When Software Development firms must choose which OS to support, they typically have to evaluate the different categories of marketplace acceptance:
For developing new applications: Windows-x86 and Linux-x86 are must-haves now
Declining but still valid are UNIX-RISC and UNIX-Itanium platforms
Viable niche are Non-x86 Windows (such as Windows-Itanium) and non-x86 Linux (Linux on POWER, Linux on System z)
Entrenched Legacy including z/OS and IBM i (formerly known as i5/OS or OS/400)
For the UNIX world, there is a three-legged stool. If any leg breaks, the entire system falls apart.
The CPU architecture: Itanium, SPARC and POWER based chipsets
Operating System: AIX, HP-UX and Solaris
Software stacks: SAP, Oracle, etc.
Of these, the analyst consider IBM POWER running AIX to be the safest investment. For those who prefer HP Integrity, consider waiting until "Tukwilla" codename project which will introduce new Itanium chipset in 2Q2010. For Sun SPARC, the European Union (EU) delay could impact user confidence in this platform. The future of SPARC remains now in the hands of Fujitsu and Oracle.
What platform will the audience invest in most over the next 5 years?
45 percent Windows
14 percent UNIX
37 percent Linux
4 percent z/OS
A survey of the audience about current comfort level of Solaris:
10 percent: still consider Solaris to be Strategic for their data center operations and will continue to use it
25 percent: will continue to use Solaris, but in more of a tactical way on a case-by-case basis
30 percent: have already begun migrating away
35 percent: Do not run Solaris
The analyst mentioned Microsoft's upcoming Windows Server 2008 R2, which will run only on 64-bit hardware but support both 32-bit and 64-bit applications. It will provide scalability up to 256 processor cores. Microsoft wants Windows to get into the High Performance Computing (HPC) marketplace, but this is currently dominated by Linux and AIX. The analyst's advice to Microsoft: System Center should manage both Windows and Linux.
Has Linux lost its popularity? The analyst indicated that companies are still running mission critical applications on non-Linux platforms, primarily z/OS, Solaris and Windows. What does help Linux are old UNIX Legacy applications, the existence of OpenSolaris x86, Oracle's Enterprise Linux, VMware and Hyper-V support for Linux, Linux on System z mainframe, and other legacy operating systems that are growing obsolete. One issue cited with Linux is scalability. Performance on systems with more than 32 processor cores is unpredictable. More mature operating systems like z/OS and AIX have stronger support for high-core environments.
A survey of the audience of which Linux or UNIX OS were most strategic to their operations resulted in the following weighted scores:
140 points: Red Hat Linux
71 points: AIX
80 points: Solaris
40 points: HP-UX
41 points: Novell SUSE Linux
19 points: Oracle Enterprise Linux
29 points: Other
The analyst wrapped up with an incredibly useful chart that summarizes the key reasons companies migrate from one OS platform to another:
Reduce Costs, Adopt HPC
DBMS, Complex projects
Availability of Admin Skills
Performance, Mission Critical Applications
Availability of Apps, leave incumbent UNIX server vendor
Consolidation, Reduce Costs
Certainly, all three types of operating system have a place, but there are definite trends and shifts in this marketspace.
Continuing my coverage of the IBM Dynamic Infrastructure Executive Summit at the Fairmont Resort in Scottsdale, Arizona, we had a day full main-tent sessions. Here is a quick recap of the sessions presented in the morning.
Leadership and Innovation on a Smarter Planet
Todd Kirtley, IBM General Manager of the western United States, kicked off the day. He explained that we are now entering the Decade of Smart: smarter healthcare, smarter energy, smarter traffic systems, and smarter cities, to name a few. One of those smarter cities is Dubuque, Iowa, nicknamed the Masterpiece of the Mississippi river. Mayor Roy Boul of Dubuque spoke next on his testimonial on working with IBM. I have never been to Dubuque, but it looks and sounds like a fun place to visit. Here is the [press release] and a two-minute [video].
Smarter Systems for a Smarter Planet
Tom Rosamillia, IBM General Manager of the System z mainframe platform, presented on smarter systems. IBM is intentionally designing integrated systems to redefine performance and deliver the highest possible value for the least amount of resource. The five key focus areas were:
Enabling massive scale
Organizing vast amounts of data
Turning information into insight
Increasing business agility
Managing risk, security and compliance
The Future of Systems
Ambuj Goyal, IBM General Manager of Development and Manufacturing, presented the future of systems. For example, reading 10 million electricity meters monthly is only 120 million transactions per year, but reading them daily is 3.65 billion, and reading them every 15 minutes will result in over 350 billion transactions per year. What would it take to handle this? Beyond just faster speeds and feeds, beyond consolidation through virtualization and multi-core systems, beyond pre-configured fit-for-purpose appliances, there will be a new level for integrated systems. Imagine a highly dense integration with over 3000 processors per frame, over 400 Petabytes (PB) of storage, and 1.3 PB/sec bandwidth. Integrating software, servers and storage will make this big jump in value possible.
POWERing your Planet
Ross Mauri, IBM General Manager of Power Systems, presented the latest POWER7 processor server product line. The IBM POWER-based servers can run any mix of AIX, Linux and IBM i (formerly i5/OS) operating system images. Compared to the previous POWER6 generation, POWER7 are four times more energy efficient, twice the performance, at about the same price. For example, an 8-socket p780 with 64 cores (eight per socket) and 256 threads (4 threads per core) had a record-breaking 37,000 SAP users in a standard SD 2-tier benchmark, beating out 32-socket and 64-socket M9000 SPARC systems from Oracle/Sun and 8-socket Nehalem-EX Fujitsu 1800E systems. See the [SAP benchmark results] for full details. With more TPC-C performance per core, the POWER7 is 4.6 times faster than HP Itanium and 7.5 times faster than Oracle Sun T5440.
This performance can be combined with incredible scalability. IBM's PowerVM outperforms VMware by 65 percent and provides features like "Live Partition Mobility" that is similar to VMware's VMotion capability. IBM's PureScale allows DB2 to scale out across 128 POWER servers, beating out Oracle RAC clusters.
The final speaker in the morning was Greg Lotko, IBM Vice President of Information Management Warehouse solutions. Analytics are required to gain greater insight from information, and this can result in better business outcomes. The [IBM Global CFO Study 2010] shows that companies that invest in business insight consistently outperform all other enterprises, with 33 percent more revenue growth, 32 percent more return on invested (ROI) capital, and 12 times more earnings (EBITDA). Business Analytics is more than just traditional business intelligence (BI). It tries to answer three critical questions for decision makers:
What is happening?
Why is it happening?
What is likely to happen in the future?
The IBM Smart Analytics System is a pre-configured integrated system appliance that combines text analytics, data mining and OLAP cubing software on a powerful data warehouse platform. It comes in three flavors: Model 5600 is based on System x servers, Model 7600 based on POWER7 servers, and Model 9600 on System z mainframe servers.
IBM has over 6000 business analytics and optimization consultants to help clients with their deployments.
While this might appear as "Death by Powerpoint", I think the panel of presenters did a good job providing real examples to emphasize their key points.
Wrapping up my coverage of the IBM Dynamic Infrastructure Executive Summit at the Fairmont Resort in Scottsdale, Arizona, we had a final morning of main-tent sessions. Here is a quick recap of the sessions presented Thursday morning. This left the afternoon for people to catch their flights or hit the links.
Data Center Actions your CFO will Love
Steve Sams, IBM Vice President of Global Site and Facilities, presented simple actions that can yield significant operational and capital cost savings. The first focus area was to extend the life of your existing data center. Some 70 percent of data centers are 10-15 years old or worse, and therefore not designed for today's computational densities. IBM did this for its Lexington data center, making changes that resulted in 8x capability without increasing footprint.
The second focus area was to rationalize the infrastructure across the organization. The process of "rationalizing" involves determining the business value of specific IT components and deciding whether the business value justifies the existing cost and complexity. It allows you to prioritize which consolidations should be done first to reduce costs and optimize value. IBM's own transformation reduced 128 CIOs down to a single CIO, and from 155 host data centers scattered were consolidated down to seven, and 80 web hosting data centers down to five. This also included consolidating 31 intranets down to a single global intranet.
The third focus area was to design your new infrastructure to be more responsive to change. IBM offers four solutions to help those looking to build or upgrade their data center:
Scalable Modular Data Center - save up to 20 percent than traditional deployments with turn-key configurations from 500 to 2500 square feet that can be deployed in as little as 8-12 weeks to an existing floorspace.
Enterprise Modular Data Center - save 40 to 50 percent with 5000 square foot standardized design for larger data centers. This modular approach provides a "pay as you grow" approach that can be more responsive to future unforeseen needs.
Portable Modular Data Center - this is the PMDC shipping container that was sitting outside in the parking lot. This can be deployed anywhere in 12-14 weeks and is ideal for dealing with disaster recoveries or situations where traditional data center floor plans cannot be built fast enough.
High Density Zone - this can help increase capacity in an existing data center without a full site retrofit.
Here is a quick [video] that provides more insight.
Neil Jarvis, CIO of American Automobile Association (AAA) for Northern California, Nevada and Utah (NCNU), provided the customer testimonial. Last September, the [AAA NCNU selected IBM] to build them an energy-efficient green data center. Neil provided us an update now six months later, managing the needs of 4 million drivers.
Virtualization - Managing the World's Infrastructure
Helene Armitage, IBM General Manager of the newly formed IBM System Software product line, presented on virtualization and management. Virtualization is becoming much more than a way of meeting the demand for performance, capability, and flexibility in the data center. It helps create a smarter, more agile data center. Her presentation focused on four areas: consolidate resources, manage workloads, automate processes, and optimize the delivery of IT services.
Charlie Weston, Group Vice President of Information Technology at Winn Dixie, one of the largest food retailers in the United States, with over 500 stores and supermarkets. The grocery business is highly competitive with tight profit margins. Winn Dixie wanted to deploy business continuity/disaster recovery (BC/DR) while managing IT equipment scattered across these 500 locations. They were able to consolidate 600 stand-alone servers into a single corporate data center. Using IBM AIX with PowerVM virtualization on BladeCenter, each JS22 blade server could manage 16 stores. These were mirrored to a nearby facility, as well as a remote disaster recovery center. They were also able to add new Linux application workloads to their existing System z9 EC mainframe. The result was to free up $5 million US dollars in capital that could be used to remodel their stores, and improve application performance 5-10 times. They were able to deploy a new customer portal on Linux for System z in days instead of months, and have reduced their disaster recovery time objective (RTO) against hurricanes from days to hours. Their next steps involves looking at desktop virtualization.
Redefining x86 Computing
Roland Hagan, IBM Vice President for IBM System x server platform, presented on how IBM is redefining the x86 computing experience. More than 50 percent of all servers are x86 based. These x86 servers are easy to acquire, enjoy a large application base, and can take advantage of readily available skilled workforce for administration. The problem is that 85 percent of x86 processing power remains idlea, energy costs are 8 times what they were 12 years ago, and management costs are now 70 percent of the IT budget.
IBM has the number one market share for scalable x86 servers. Roland covered the newly announced eX5 architecture that has been deployed in both rack-optimized models as well as IBM BladeCenter blade servers. These can offer 2x the memory capacity as competitive offerings, which is important for today's server virtualization, database and analytics workloads. This includes 40 and 80 DIMM models of blades, and 64 to 96 DIMM models of rack-optimized systems. IBM also announced eXFlash, internal Solid State Drives accessible at bus speeds.
The results can be significant. For example, just two IBM System x3850 4-socket, 8-core systems can replace 50 (yes, FIFTY) HP DL585 4-socket, 4-core Opteron rack servers, reducing costs 80 percent with a 3-month ROI payback period. Compared to IBM's previous X4 architecture, the eX5 provides 3.5 times better SAP performance, 3.8 times faster server virtualization performance, and 2.8 times faster database performance.
The CIO of Acxiom provided the customer testimonial. They were able to get a 35-to-1 consolidation switching over to IBM x86 servers, resulting in huge savings.
Top ROI projects to Get Started
Mark Shearer, IBM Vice President of Growth Solutions, and formerly my fourth-line manager as the Vice President of Marketing and Communications, presented a list of projects to help clients get started. There are over 500 client references that have successfully implement Smarter Planet projects. Mark's list were grouped into five categories:
Enabling Massive Scale
Increase Business Agility
Manage Risk, Compliance and Security
Organize Vast Amounts of Information
Turn Information into Insight
The attendees were all offered a free "Infrastructure Study" to evaluate their current data center environments. A team of IBM experts will come on-site, gather data, interview key personnel and make recommendations. Alternatively, these can be done at one of IBM's many briefing centers, such as the IBM Executive Briefing Center in Tucson Arizona that I work at.
This wraps up the week for me. I have to pack the XIV back into the crate, and drive back to Tucson. IBM plans to host another Executive Summit in the September/October time frame on the East coast.
Well, it feels like Tuesday and you know what that means... "IBM Announcement Day!" Actually, today is Wednesday, but since Monday was Memorial Day holiday here in the USA, my week is day-shifted. Yesterday, IBM announced its latest IBM FlashCopy Manager v2.2 release. Fellow blogger, Del Hoobler (IBM) has also posted something on this out atthe [Tivoli Storage Blog].
IBM FlashCopy Manager replaces two previous products. One was called Tivoli Storage Manager for Copy Services, the other was called Tivoli Storage Manager for Advanced Copy Services. To say people were confused between these two was an understatement, the first was for Windows, and the second was for UNIX and Linux operating systems. The solution? A new product that replaces both of these former products to support Windows, UNIX and Linux! Thus, IBM FlashCopy Manager was born. I introduced this product back in 2009 in my post [New DS8700 and other announcements].
IBM Tivoli Storage FlashCopy Manager provides what most people with "N series SnapManager envy" are looking for: application-aware point-in-time copies. This product takes advantage of the underlying point-in-time interfaces available on various disk storage systems:
FlashCopy on the DS8000 and SAN Volume Controller (SVC)
Snapshot on the XIV storage system
Volume Shadow Copy Services (VSS) interface on the DS3000, DS4000, DS5000 and non-IBM gear that supports this Microsoft Windows protocol
For Windows, IBM FlashCopy Manager can coordinate the backup of Microsoft Exchange and SQL Server. The new version 2.2 adds support for Exchange 2010 and SQL Server 2008 R2. This includes the ability to recover an individual mailbox or mail item from an Exchange backup. The data can be recovered directly to an Exchange server, or to a PST file.
For UNIX and Linux, IBM FlashCopy Manager can coordinate the backup of DB2, SAP and Oracle databases. Version 2.2 adds support specific Linux and Solaris operating systems, and provides a new capability for database cloning. Basically, database cloning restores a database under a new name with all the appropriate changes to allow its use for other purposes, like development, test or education training. A new "fcmcli" command line interface allows IBM FlashCopy Manager to be used for custom applications or file systems.
A common misperception is that IBM FlashCopy Manager requires IBM Tivoli Storage Manager backup software to function. That is not true. You have two options:
In Stand-alone mode, it's just you, the application, IBM FlashCopy Manager and your disk system. IBM FlashCopy Manager coordinates the point-in-time copies, maintains the correct number of versions, and allows you to backup and restore directly disk-to-disk.
Unified Recovery Management with Tivoli Storage Manager
Of course, the risk with relying only on point-in-time copies is that in most cases, they are on the same disk system as the original data. The exception being virtual disks from the SAN Volume Controller. IBM FlashCopy Manager can be combined with IBM Tivoli Storage Manager so that the point-in-time copies can be copied off to a local or remote TSM server, so that if the disk system that contains both the source and the point-in-time copies fails, you have a backup copy from TSM. In this approach, you can still restore from the point-in-time copies, but you can also restore from the TSM backups as well.
IBM FlashCopy Manager is an excellent platform to connect application-aware fucntionality with hardware-based copy services.
Well, it's Wednesday, and you know what that means... IBM Announcements!
(Actually most IBM announcements are on Tuesdays, but IBM gave me extra time to recover from my trip to Europe!)
Today, IBM announced [IBM PureSystems], a new family of expert-integrated systems that combine storage, servers, networking, and software, based on IBM's decades of experience in the IT industry. You can register for the [Launch Event] today (April 11) at 2pm EDT, and download the companion "Integrated Expertise" event app for Apple, Android or Blackberry smartphones.
(If you are thinking, "Hey, wait a minute, hasn't this been done before?" you are not alone. Yes, IBM introduced the System/360 back in 1964, and the AS/400 back in 1988, so today's announcement is on scheduled for this 24-year cycle. Based on IBM's past success in this area, others have followed, most recently, Oracle, HP and Cisco.)
Initially, there are two offerings:
IBM PureFlex™ System
IBM PureFlex is like IaaS-in-a-box, allowing you to manage the system as a pool of virtual resources. It can be used for private cloud deployments, hybrid cloud deployments, or by service providers to offer public cloud solutions. IBM drinks its own champagne, and will have no problem integrating these into its [IBM SmartCloud] offerings.
To simplify ordering, the IBM PureFlex comes in three tee-shirt sizes: Express, Standard and Enterprise.
IBM PureFlex is based on a 10U-high, 19-inch wide, standard rack-mountable chassis that holds 14 bays, organized in a 7 by 2 matrix. Unlike BladeCenter where blades are inserted vertically, the IBM PureFlex nodes are horizontal. Some of the nodes take up a single bay (half-wide), but a few are full-wide, take up two bays, the full 19-inch width of the chassis. Compute and storage snap in the front, while power supplies, fans, and networking snap in the back. You can fit up to four chassis in a standard 42U rack.
Unlike competitive offerings, IBM does not limit you to x86 architectures. Both x86 and POWER-based compute nodes can be mixed into a single chassis. Out of the box, the IBM PureFlex supports four operating systems (AIX, IBM i, Linux and Windows), four server hypervisors (Hyper-V, Linux KVM, PowerVM, and VMware), and two storage hypervisors (SAN Volume Controller and Storwize V7000).
There are a variety of storage options for this. IBM will offer SSD and HDD inside the compute nodes themselves, direct-attached storage nodes, and an integrated version of the Storwize V7000 disk system. Of course, every IBM System Storage product is supported as external storage. Since Storwize V7000 and SAN Volume Controller support external virtualization, many non-IBM devices will be supported automatically as well.
Networking is also optimized, with options for 10Gb and 40Gb Ethernet/FCoE, 40Gb and 56Gb Infiniband, 8Gbps and 16Gbps Fibre Channel. Much of the networking traffic can be handled within the chassis, to minimize traffic on external switches and directors.
For management, IBM offers the Flex System Manager, that allows you to manage all the resources from a single pane of glass. The goal is to greatly simplify the IT lifecycle experience of procurement, installation, deployment and maintenance.
IBM PureApplication™ System
IBM PureApplication is like PaaS-in-a-box. Based on the IBM PureFlex infrastructure, the IBM PureApplication adds additional software layers focused on transactional web, business logic, and database workloads. Initially, it will offer two platforms: Linux platform based on x86 processors, Linux KVM and Red Hat Enterprise Linux (RHEL); and a UNIX platform based on POWER7 processors, PowerVM and AIX operating system. It will be offered in four tee-shirt sizes (small, medium, large and extra large).
In addition to having IBM's middleware like DB2 and WebSphere optimized for this platform, over 600 companies will announce this week that they will support and participate in the IBM PureSystems ecosystem as well. Already, there are 150 "Patterns of Expertise" ready to deploy from IBM PureSystem Centre, a kind of a "data center app store", borrowing an idea used today with smartphones.
By packaging applications in this manner, workloads can easily shift between private, hybrid and public clouds.
If you are unhappy with the inflexibility of your VCE Vblock, HP Integrity, or Oracle ExaLogic, talk to your local IBM Business Partner or Sales Representative. We might be able to buy your boat anchor off your hands, as part of an IBM PureSystems sale, with an attractive IBM Global Financing plan.
Have you ever noticed that sometimes two movies come out that seem eerily similar to each other, released by different studios within months or weeks of each other? My sister used to review film scripts for a living, she would read ten of them and have to pick her top three favorites, and tells me that scripts for nearly identical concepts came all the time. Here are a few of my favorite examples:
1994: [Wyatt Earp] and [Tombstone] were Westerns recounting the famed gunfight at the O.K. Corral. Tombstone, Arizona is near Tucson, and the gunfight is recreated fairly often for tourists.
1998: [Armageddon] and [Deep Impact] were a pair of disaster movies dealing with a large rock heading to destroy all life on earth. I was in Mazatlan, Mexico to see the latter, dubbed in Spanish as "Impacto Profundo".
1998: [A Bug's Life] and [Antz] were computer-animated tales of the struggle of one individual ant in an ant colony.
2000: [Mission to Mars] and [Red Planet] were sci-fi pics exploring what a manned mission to our neighboring planet might entail.
This is different than copy-cat movies that are re-made or re-imagined many years later based on the previous successes of an original. Ever since my blog post [VPLEX: EMC's Latest Wheel is Round] in 2010 comparing EMC's copy-cat product that came our seven years after IBM's SAN Volume Controller (SVC), I've noticed EMC doesn't talk about VPLEX that much anymore.
This week, IBM announced [XIV Gen3 Solid-State Drive support] and our friends over at EMC announced [VFCache SSD-based PCIe cards]. Neither of these should be a surprise to anyone who follows the IT industry, as IBM had announced its XIV Gen3 as "SSD-Ready" last year specifically for this purpose, and EMC has been touting its "Project Lightning" since last May.
Fellow blogger Chuck Hollis from EMC has a blog post [VFCache means Very Fast Cache indeed] that provides additional detail. Chuck claims the VFCache is faster than popular [Fusion-IO PCIe cards] available for IBM servers. I haven't seen the performance spec sheets, but typically SSD is four to five times slower than the DRAM cache used in the XIV Gen3. The VFCache's SSD is probably similar in performance to the SSD supported in the IBM XIV Gen3, DS8000, DS5000, SVC, N series, and Storwize V7000 disk systems.
Nonetheless, I've been asked my opinions on the comparison between these two announcements, as they both deal with improving application performance through the use of Solid-State Drives as an added layer of read cache.
(FTC Disclosure: I am both a full-time employee and stockholder of the IBM Corporation. The U.S. Federal Trade Commission may consider this blog post as a paid celebrity endorsement of IBM servers and storage systems. This blog post is based on my interpretation and opinions of publicly-available information, as I have no hands-on access to any of these third-party PCIe cards. I have no financial interest in EMC, Fusion-IO, Texas Memory Systems, or any other third party vendor of PCIe cards designed to fit inside IBM servers, and I have not been paid by anyone to mention their name, brands or products on this blog post.)
The solutions are different in that IBM XIV Gen3 the SSD is "storage-side" in the external storage device, and EMC VFCache is "server-side" as a PCI Express [PCIe] card. Aside from that, both implement SSD as an additional read cache layer in front of spinning disk to boost performance. Neither is an industry first, as IBM has offered server-side SSD since 2007, and IBM and EMC have offered storage-side SSD in many of their other external storage devices. The use of SSD as read cache has already been available in IBM N series using [Performance Accelerator Module (PAM)] cards.
IBM has offered cooperative caching synergy between its servers and its storage arrays for some time now. The predecessor to today's POWER7-based were the iSeries i5 servers that used PCI-X IOP cards with cache to connect i5/OS applications to IBM's external disk and tape systems. To compete in this space, EMC created their own PCI-X cards to attach their own disk systems. In 2006, IBM did the right thing for our clients and fostered competition by entering in a [Landmark agreement] with EMC to [license the i5 interfaces]. Today, VIOS on IBM POWER systems allows a much broader choice of disk options for IBM i clients, including the IBM SVC, Storwize V7000 and XIV storage systems.
Can a little SSD really help performance? Yes! An IBM client running a [DB2 Universal Database] cluster across eight System x servers was able to replace an 800-drive EMC Symmetrix by putting eight SSD Fusion-IO cards in each server, for a total of 64 Solid-State drives, saving money and improving performance. DB2 has the Data Partitioning Feature that has multi-system DB2 configurations using a Grid-like architecture similar to how XIV is designed. Most IBM System x and BladeCenter servers support internal SSD storage options, and many offer PCIe slots for third-party SSD cards. Sadly, you can't do this with a VFCache card, since you can have only one VFCache card in each server, the data is unprotected, and only for ephemeral data like transaction logs or other temporary data. With multiple Fusion-IO cards in an IBM server, you can configure a RAID rank across the SSD, and use it for persistent storage like DB2 databases.
Here then is my side-by-side comparison:
IBM XIV Gen3 SSD Caching
Selected x86-based models of Cisco UCS, Dell PowerEdge, HP ProLiant DL, and IBM xSeries and System x servers
All of these, plus any other blade or rack-optimized server currently supported by XIV Gen3, including Oracle SPARC, HP Titanium, IBM POWER systems, and even IBM System z mainframes running Linux
Operating System support
Linux RHEL 5.6 and 5.7, VMware vSphere 4.1 and 5.0, and Windows 2008 x64 and R2.
All of these, plus all the other operating systems supported by XIV Gen3, including AIX, IBM i, Solaris, HP-UX, and Mac OS X
FCP and iSCSI
Vendor-supplied driver required on the server
Yes, the VFCache driver must be installed to use this feature.
No, IBM XIV Gen3 uses native OS-based multi-pathing drivers.
External disk storage systems required
None, it appears the VFCache has no direct interaction with the back-end disk array, so in theory the benefits are the same whether you use this VFCache card in front of EMC storage or IBM storage
XIV Gen3 is required, as the SSD slots are not available on older models of IBM XIV.
Shared disk support
No, VFCache has to be disabled and removed for vMotion to take place.
Yes! XIV Gen3 SSD caching shared disk supports VMware vMotion and Live Partition Mobility.
Support for multiple servers
An advantage of the XIV Gen3 SSD caching approach is that the cache can be dynamically allocated to the busiest data from any server or servers.
Support for active/active server clusters
Aware of changes made to back-end disk
No, it appears the VFCache has no direct interaction with the back-end disk array, so any changes to the data on the box itself are not communicated back to the VFCache card itself to invalidate the cache contents.
None identified. However, VFCache only caches blocks 64KB or smaller, so any sequential processing with larger blocks will bypass the VFCache.
Yes! XIV algorithms detect sequential access and avoid polluting the SSD with these blocks of data.
Number of SSD supported
One, which seems odd as IBM supports multiple Fusion-IO cards for its servers. However, this is not really a single point of failure (SPOF) as an application experiencing a VFCache failure merely drops down to external disk array speed, no data is lost since it is only read cache.
6 to 15 (one per XIV module) for high availability.
Pin data in SSD cache
Yes, using split-card mode, you can designate a portion of the 300GB to serve as Direct-attached storage (DAS). All data written to the DAS portion will be kept in SSD. However, since only one card is supported per server and the data is unprotected, this should only be used for ephemeral data like logs and temp files.
No, there is no option to designate an XIV Gen3 volume to be SSD-only. Consider using Fusion-IO PCIe card as a DAS alternative, or another IBM storage system for that requirement.
Pre-sales Estimating tools
Yes! CDF and Disk Magic tools are available to help cost-justify the purchase of SSD based on workload performance analysis.
IBM has the advantage that it designs and manufactures both servers and storage, and can design optimal solutions for our clients in that regard.
By combining multiple components into a single "integrated system", IBM can offer a blended disk-and-tape storage solutions. This provides the best of both worlds, high speed access using disk, while providing lower costs and more energy efficiency with tape. According to a study by the Clipper Group, tape can be 23 times less expensive than disk over a 5 year total cost of ownership (TCO).
I've also covered Hierarchical Storage Management, such as my post [Seven Tiers of Storage at ABN Amro], and my role as lead architect for DFSMS on z/OS in general, and DFSMShsm in particular.
However, some explanation might be warranted in the use of these two terms in regards to SONAS. In this case, ILM refers to policy-based file placement, movement and expiration on internal disk pools. This is actually a GPFS feature that has existed for some time, and was tested to work in this new configuration. Files can be individually placed on either SAS (15K RPM) or SATA (7200 RPM) drives. Policies can be written to move them from SAS to SATA based on size, age and days non-referenced.
HSM is also a form of ILM, in that it moves data from SONAS disk to external storage pools managed by IBM Tivoli Storage Manager. A small stub is left behind in the GPFS file system indicating the file has been "migrated". Any reference to read or update this file will cause the file to be "recalled" back from TSM to SONAS for processing. The external storage pools can be disk, tape or any other media supported by TSM. Some estimate that as much as 60 to 80 percent of files on NAS have low reference and should be stored on tape instead of disk, and now SONAS with HSM makes that possible.
This distinction allows the ILM movement to be done internally, within GPFS, and the HSM movement to be done externally, via TSM. Both ILM and HSM movement take advantage of the GPFS high-speed policy engine, which can process 10 million files per node, run in parallel across all interface nodes. Note that TSM is not required for ILM movement. In effect, SONAS brings the policy-based management features of DFSMS for z/OS mainframe to all the rest of the operating systems that access SONAS.
HTTP and NIS support
In addition to NFS v2, NFS v3, and CIFS, the SONAS v1.1.1 adds the HTTP protocol. Over time, IBM plans to add more protocols in subsequent releases. Let me know which protocols you are interested in, so I can pass that along to the architects designing future releases!
SONAS v1.1.1 also adds support for Network Information Service (NIS), a client/server based model for user administration. In SONAS, NIS is used for netgroup and ID mapping only. Authentication is done via Active Directory, LDAP or Samba PDC.
SONAS already had synchronous replication, which was limited in distance. Now, SONAS v1.1.1 provides asynchronous replication, using rsync, at the file level. This is done over Wide Area Network (WAN) across to any other SONAS at any distance.
Interface modules can now be configured with either 64GB or 128GB of cache. Storage now supports both 450GB and 600GB SAS (15K RPM) and both 1TB and 2TB SATA (7200 RPM) drives. However, at this time, an entire 60-drive drawer must be either all one type of SAS or all one type of SATA. I have been pushing the architects to allow each 10-pack RAID rank to be independently selectable. For now, a storage pod can have 240 drives, 60 drives of each type of disk, to provide four different tiers of storage. You can have up to 30 storage pods per SONAS, for a total of 7200 drives.
An alternative to internal drawers of disk is a new "Gateway" iRPQ that allows the two storage nodes of a SONAS storage pod to connect via Fibre Channel to one or two XIV disk systems. You cannot mix and match, a storage pod is either all internal disk, or all external XIV. A SONAS gateway combined with external XIV is referred to as a "Smart Business Storage Cloud" (SBSC), which can be configured off premises and managed by third-party personnel so your IT staff can focus on other things.
See the Announcement Letters for the SONAS [hardware] and [software] for more details.
For those who are wondering how this positions against IBM's other NAS solution, the IBM System Storage N series, the rule of thumb is simple. If your capacity needs can be satisfied with a single N series box per location, use that. If not, consider SONAS instead. For those with non-IBM NAS filers that realize now that SONAS is a better approach, IBM offers migration services.
Both the Information Archive and the SONAS can be accessed from z/OS or Linux on System z mainframe, from "IBM i", AIX and Linux on POWER systems, all x86-based operating systems that run on System x servers, as well as any non-IBM server that has a supported NAS client.