Comments (6) Visits (20438)
Have you ever noticed that sometimes two movies come out that seem eerily similar to each other, released by different studios within months or weeks of each other? My sister used to review film scripts for a living, she would read ten of them and have to pick her top three favorites, and tells me that scripts for nearly identical concepts came all the time. Here are a few of my favorite examples:
(I think I made my point with just a few examples. A more complete list can be found on [Sam Greenspan's 11 Points website].)
This is different than copy-cat movies that are re-made or re-imagined many years later based on the previous successes of an original. Ever since my blog post [VPLEX: EMC's Latest Wheel is Round] in 2010 comparing EMC's copy-cat product that came our seven years after IBM's SAN Volume Controller (SVC), I've noticed EMC doesn't talk about VPLEX that much anymore.
This week, IBM announced [XIV Gen3 Solid-State Drive support] and our friends over at EMC announced [VFCache SSD-based PCIe cards]. Neither of these should be a surprise to anyone who follows the IT industry, as IBM had announced its XIV Gen3 as "SSD-Ready" last year specifically for this purpose, and EMC has been touting its "Project Lightning" since last May.
Fellow blogger Chris Mellor from The Register has a series of articles to cover this, including [EMC crashes the server flash party], [NetApp slaps down Lightning with multi-card Flash flush], [HP may be going the server flash route], and [Now HDS joins the server flash party].
Fellow blogger Chuck Hollis from EMC has a blog post [VFCache means Very Fast Cache indeed] that provides additional detail. Chuck claims the VFCache is faster than popular [Fusion-IO PCIe cards] available for IBM servers. I haven't seen the performance spec sheets, but typically SSD is four to five times slower than the DRAM cache used in the XIV Gen3. The VFCache's SSD is probably similar in performance to the SSD supported in the IBM XIV Gen3, DS8000, DS5000, SVC, N series, and Storwize V7000 disk systems.
Nonetheless, I've been asked my opinions on the comparison between these two announcements, as they both deal with improving application performance through the use of Solid-State Drives as an added layer of read cache.
(FTC Disclosure: I am both a full-time employee and stockholder of the IBM Corporation. The U.S. Federal Trade Commission may consider this blog post as a paid celebrity endorsement of IBM servers and storage systems. This blog post is based on my interpretation and opinions of publicly-available information, as I have no hands-on access to any of these third-party PCIe cards. I have no financial interest in EMC, Fusion-IO, Texas Memory Systems, or any other third party vendor of PCIe cards designed to fit inside IBM servers, and I have not been paid by anyone to mention their name, brands or products on this blog post.)
The solutions are different in that IBM XIV Gen3 the SSD is "storage-side" in the external storage device, and EMC VFCache is "server-side" as a PCI Express [PCIe] card. Aside from that, both implement SSD as an additional read cache layer in front of spinning disk to boost performance. Neither is an industry first, as IBM has offered server-side SSD since 2007, and IBM and EMC have offered storage-side SSD in many of their other external storage devices. The use of SSD as read cache has already been available in IBM N series using [Performance Accelerator Module (PAM)] cards.
IBM has offered cooperative caching synergy between its servers and its storage arrays for some time now. The predecessor to today's POWER7-based were the iSeries i5 servers that used PCI-X IOP cards with cache to connect i5/OS applications to IBM's external disk and tape systems. To compete in this space, EMC created their own PCI-X cards to attach their own disk systems. In 2006, IBM did the right thing for our clients and fostered competition by entering in a [Landmark agreement] with EMC to [license the i5 interfaces]. Today, VIOS on IBM POWER systems allows a much broader choice of disk options for IBM i clients, including the IBM SVC, Storwize V7000 and XIV storage systems.
EMC is not the first to manufacture an SSD-based PCIe card. Last summer, my friends at Texas Memory Systems [TMS] gave away a [RAMsan-70 PCIe card] at an after-party on [Day 2 of the IBM System Storage University].
Can a little SSD really help performance? Yes! An IBM client running a [DB2 Universal Database] cluster across eight System x servers was able to replace an 800-drive EMC Symmetrix by putting eight SSD Fusion-IO cards in each server, for a total of 64 Solid-State drives, saving money and improving performance. DB2 has the Data Partitioning Feature that has multi-system DB2 configurations using a Grid-like architecture similar to how XIV is designed. Most IBM System x and BladeCenter servers support internal SSD storage options, and many offer PCIe slots for third-party SSD cards. Sadly, you can't do this with a VFCache card, since you can have only one VFCache card in each server, the data is unprotected, and only for ephemeral data like transaction logs or other temporary data. With multiple Fusion-IO cards in an IBM server, you can configure a RAID rank across the SSD, and use it for persistent storage like DB2 databases.
Here then is my side-by-side comparison:
IBM has the advantage that it designs and manufactures both servers and storage, and can design optimal solutions for our clients in that regard.
technorati tags: IBM, XIV, Gen3, SSD, cache, EMC, VFCache, Project Lightning, SVC, Solid State Drives, Fusion-IO, Texas Memory Systems, RAMSan, System+x, POWER systems, VIOS, DRAM, VMware, Vmotion, Live Partition Mobility, AIX, IBM i, PCIe, PCI-X
Well, it's Tuesday again, and you know what that means! IBM Announcements! Typically, IBM System Storage has three to five major product launches per year. Making announcements every Tuesday would have been two frequent, and having one big announcement every two or three years would be too far apart. Worldwide combined revenues for storage hardware and software grew double digits last year, comparing full-year 2011 to the prior 2010 year, and I am sure that 2012 will also be a good year for IBM as well! This week we have announcements for both disk and tape, but since 2012 is the 60th Diamond Anniversary for tape, I will start with tape systems first.
Well, that's the first major IBM System Storage launch of 2012. Let me know what you think in the comment section below.
Last week, on January 31, two of my colleagues retired from IBM. At IBM, retirements always happen on the last day of the month. Here is my memories of each, listed alphabetically by last name.
Lately, it seems employees at other companies jump from job to job, and from employer to employer, on average every 4.1 years. According to [National Longitudinal Surveys] conducted by the [US. Government's Bureau of Labor Statistics], the average baby boomer holds 11 jobs. In contrast, it is quite common to see IBMers work the majority of their career at IBM.
The next time you have a tasty beverage in your hand, raise your glass! To Mark and Jim, you have earned our respect, and you both have certainly earned your retirement!
Well, it's Tuesday again, and today I am announcing that we have a new IBM Storage blogger joining the Blogosphere: Raj Sharma!
Raj hails from Toronto, Canada and will be able to provide the Canadian perspective on all things Storage. I had the pleasure to meet Raj in person here in Tucson when him and dozens of his cohorts came down for a multi-customer briefing at the [IBM Executive Briefing Center] where I work.
It takes me 20-30 minutes to complete a crossword or Sudoku puzzle. I am in no hurry, and I find the process relaxing. But what if you were paid to complete a puzzle? In that case, finishing the puzzle sooner, in fewer minutes, means more money in your paycheck per hour worked! However, getting paid would mean that doing these puzzles may no longer be fun or relaxing.
The idea of converting a hobby into a revenue-generating activity is not new. Who wouldn't want to earn money doing something you were planning to do already? The television is full of commercial advertisements for credit cards where you can earn Double Miles or Cash Rewards just for spending money on things you were going to spend on anyways.
But is "earn" the right word? The merchants pay a percentage fee every time a patron uses a credit card, and the bank is just providing a marketing incentive in the form of a portion of those fees back to the consumer, to encourage more usage of their card versus other forms of payment. Sort of like "profit sharing".
I am almost fell out of my chair when I saw that [iPhone app Viggle rewards couch potatoes for watching television]. For those not familiar with American slang, the term couch potato refers to [a lazy person who does nothing but sit on the couch and watch television]. But you can't be called lazy if you are getting paid to do it, right?
(FTC Disclosure: I am a full-time employee and shareholder of the IBM Corporation. This blog post should not be considered an endorsement for anything. My opinions and writings are based on publicly available information and my own experiences doing freelance work prior to my employment at IBM. I have no hands-on experience with Amazon Mechanical Turk, neither as a worker nor requester, have not participated in TopCoder contests, nor have I used the Viggle app. I do not have any financial interest in Amazon, TopCoder, Viggle or any other third-party company mentioned on this blog post, nor has anyone paid me to mention their company names, brands or offerings.)
Here's how it works. You get the app on your phone, and register each television show as you watch it. You can watch the show live, or much later recorded on your Tivo. You watch the shows you were going to watch anyways, and just provide your demographics, all in the name of market research. You get two points per minute of watching, and after 7,500 points, you get a $5 gift card from retailers such as from retailers such as Burger King, Starbucks, Best Buy, Sephora, Fandango, and CVS drugstores. For the typical American, it would take about three weeks to watch that much television!
Of course, this is not the only way to earn money working from home. A reader asked me for my opinions of [Amazon Mechanical Turk]. While the other examples above are done for marketing purposes, Mechanical Turk can be used for a variety of other things. Up to now, the IT industry has regarded the Cloud as the delivery of computing as a service, with the infrastructure, hardware and software existing on internationally networked servers, effectively invisible to the end user. This model is now to being applied broadly to people.
Basically, Mechanical Turk acts as a marketplace, where employers post Human Intelligent Tasks (HITs) that workers can do. Most can be completed in minutes and you are paid pennies to do so. Some examples might help illustrate what a HIT looks like:
As a Mechanical Turk worker, you only work on the HITs you choose to work on, presumably those that interest you, and that you can do well and quickly. Workers can do this anytime, anywhere, such as 2:00am in the morning, at home, when you can't sleep or taking care of children. You can choose to work as much or as little as you like.
The employers--referred to as Mechanical Turk requesters--put money into their payroll accounts, load up their tasks, and hit publish. This gives them immediate access to a global, on-demand 24-by-7 workforce that can help complete thousands of HITs in minutes. These employers won't have to put an advertisement in the want ads and interview potential candidates, just to let them go later when the project is over.
Just like any other job, Mechanical Turk wages are reported to the IRS, and each person's work is evaluated for quality. In doing these tasks, you build up your "digital reputation" that will either prevent you or allow you to work on certain HITs. You can also take tests to reach Qualification levels to be eligible to work on HITs not available to everyone else.
Software engineers would have a hard time writing an Artificial Intelligence [AI] program to do these simple tasks, so being able to generate a HIT for something in the middle of a computer program might be the easiest way to get past a difficult part of an algorithm. Amusingly, Amazon describes this form of [crowdsourcing] as an artificial form of Artificial Intelligence!
While this approach may work for small, easily defined tasks, what about works that require a high amount of Human Intelligence, like storage software or hardware development?
When I was working for IBM as a software engineer in the 1980s and 1990s, it took us years to get a project done, using the traditional [Waterfall Model]. My job as a software architect was to estimate the thousands of lines of code (KLOC) a project would require, estimate the number of Person-Years (PY) it would take, and recommend the appropriate sized team. Back then, each engineer averaged only about 1,000 lines of software code per year, so KLOC and PY were often used interchangeably. Fellow IBM author Fred Brooks wrote an excellent book on the process called [The Mythical Man-Month].
The Waterfall model has the advantage that people only have to work a portion of the cycle on the project. In between, there was plenty of downtime to attend training, improve your skills, or take vacation. As our director Lynn Yates would often complain, "if they are only writing two lines of code in the morning, and two in the afternoon, why do they need time to rest?"
The Waterfall model was not perfect, and had its share of critics. One downside was that the clients didn't see anything until General Availability (GA), with a few getting a glimpse a few months earlier during our Early Support Program (ESP). By the time clients could tell us it was not what they wanted or expected, it was too late to change until the next release.
To address this concern, 17 software engineers wrote the now famous [Agile Manifesto]. The authors felt that collaboration, between the developers and with the clients, is critical to success. Business people and developers must work together daily throughout the project. The most efficient and effective method of conveying information to and within a development team is face-to-face conversation. The best architectures, requirements, and designs emerge from self-organizing teams. The result is an iterative approach that allows the client to see working prototypes early in the process, allowing last-minute changes to requirements to influence the final product.
Combining the Mechanical Turk concept with Agile programming methodology gives you what IBM calls an "Outcomes Model" approach. In the IBM research paper [Software Economies] (PDF, 5 pages), the authors argue that there are four fundamental principles needed for an "Outcomes Model" approach:
I was surprised to see that [the TopCoder Community is 390,593 strong], nearly the size of the entire IBM company. TopCoder is focused on computer programming and digital creation using the Outcomes Model approach. Rather than paying everyone for their work, however, the platform is designed around challenges and competitions, and the top players or contributors are rewarded with cash prizes.
Does it make sense for permanent IT staff to become freelancers in an international "talent cloud"? I can understand why large corporations would prefer [international employment contracts that help circumvent restrictive regulations of certain countries], but can they convince enough people to give up social security protection, guaranteed salary, paid vacations and sick leave, just to have some added freedom and flexibility? According to Matthew Ingram from GigaOM, [many people are choosing a freelance lifestyle].
As an innovative company, IBM constantly explores a variety of means and approaches to offer value to its clients and customers. These new approaches may have some distinct advantages not just for IBM and its shareholders, but also for its clients and the freelancers hired to work on these projects. The global marketplace is getting flatter, smaller and smarter. It will be interesting how this plays out. If the discussion above encourages you to hone your technical skills, perhaps that is motivation enough to get off the couch and stop watching so much television!