Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Tony Pearson is a Master Inventor and Senior IT Specialist for the IBM System Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2011, Tony celebrated his 25th year anniversary with IBM Storage on the same day as the IBM's Centennial. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
Since the [IBM System Storage Technical University 2011] runs concurrently with the System x Technical University, attendees are allowed to mix-and-match. I attended several presentations regarding server virtualization and hypervisors.
Matt Archibald is an IT Management Consultant in IBM's Systems Agenda Delivery team. He started with a history of hypervisors, from IBM's early CP/CMS in 1967, through the latest VMware Vsphere 5 just announced.
He explained that there are three types of Hypervisor architectures today:
Type 1 - often referred to as "Bare Metal" runs directly on the server host hardware, and allows different operating system virtual machines to run as guests. IBM's System z [PR/SM] and [PowerVM] as well as the popular VMware ESXi are examples of this type.
Type 2 - often referred to as "Hosted" runs above an existing operating system, and allows different operating system virtual machines to run as guests. The popular [Oracle/Sun VirtualBox] is an example of this type.
OS Containers - runs above an existing operating system base, and allows multiple "guests" that all run the same operating system as the base. This affords some isolation between applications. [Parallels Virtuozzo Containers] is an example of this type.
The dominant architecture is Type 1. For x86, IBM is the number one reseller of VMware. VMware recently announced [Vsphere 5], which changes its licensing model from CPU-based to memory-based. For example, a virtual machine with 32 virtual CPUs and 1TB of virtual RAM (VRAM) would cost over $73,000 per year to license the VMware "Enterprise Plus" software. The only plus-side to this new licensing is that the "memory" entitlement transfers during Disaster Recovery to the remote location.
"Xen is dead." was the way Matt introduced the section discussing Hybrid Type-1 hypervisors like Xen and Hyper-V. These run bare-metal, but require networking and storage I/O to be processed by a single bottleneck partition referred to as "Dom 0". As such, this hybrid approach does not scale well on larger multi-sock host servers. So, his Xen-is-dead message was referring to all Hybrid-based Hypervisors including Hyper-V, not just those based on Xen itself.
The new up-and-comer is "Linux KVM". Last year, in my blog post about [System x KVM solutions], I mentioned the confusion over KVM acronym used with two different meanings. Many people use KVM to refer to Keyboard-Video-Mouse switches that allow access to multiple machines. IBM has renamed these switches to Local Console Managers (LCM) and Global Console Manager (GCM). This year, the System x team have adopted the use of "Linux KVM" to refer to the second meaning, the [Kernel-based Virtual Machine] hypervisor.
Linux KVM is not a product, but an open-source project. As such, it is built into every Linux kernel. Red Hat has created two specific deliverables under the name Red Hat Enterprise Virtualization (RHEV):
RHEV-H, a tiny ESXi-like bare-metal hypervisor that fits in 78MB, making it small enough to be on a USB stick, CD-rom or memory chip.
RHEV-M, a vCenter-like management software to manage multiple virtual machines across multiple hosts.
Personally, I run RHEL 6.1 with KVM on my IBM laptop as my primary operating system, with a Windows XP guest image to run a few Windows-specific applications.
A complaint of the current RHEV 2.2 release from Linux fanboys is that RHEV-M requires a Windows server, and uses Windows Powershell for scripting. The next release of RHEV is likely to provide a Linux-based option for management server.
Of the various hypervisors evaluated, KVM appears to be poised to offer the best scalability for multi-socket host machines. The next release is expected to support up to 4096 threads, 64TB of RAM, and over 2000 virtual machines. Compare that to VMware Vsphere 5 that supports only 160 threads, 2TB of RAM and up to 512 virtual machines.
Linux KVM Overview
Matt also presented a session focused on Linux KVM. While IBM is the leading reseller of VMware for the x86 server platform, it has chosen Linux KVM to run all of its internal x86 Cloud Computing facilities, as it can offer 40 to 80 percent savings, based on Total Cost of Ownership (TCO).
Linux KVM can run unmodified Windows and Linux guest operating systems as guest images with less than 5 percent overhead. Since KVM is built into the Linux kernel, any certification testing automatically benefits KVM as well. KVM takes advantage of modern CPU extensions like Intel's VT and AMD's AMD-V.
For high availability, in the event that a host fails, KVM can restart the guest images on other KVM hosts. RHEV offers "prioritized restart order" which allows mision-critical images to be started before less important ones.
RHEV also provides "Virtual Desktop Infrastructure", known as VDI. This allows a lightweight client with a browser to access an OS image running on a KVM host. Matt was able to demonstrate this with Firefox browser running on his Android-based Nexus One smartphone.
RHEV also adds features that make it ideal for cloud deployments, including hot-pluggable CPU, network and storage; service Level Agreement monitoring for CPU, memory and I/O resources; storage live migrations to move the raw image files while guests are running; and a self-service user portal.
IBM has been doing server virtualization for decades. When I first started at IBM in 1986, I was doing z/OS development and testing on z/VM guest images. Later, around 1999, I started working with the "Linux on z" team, running multiple Linux images under PR/SM and z/VM. While the server virtualization solutions most people are familiar with (VMware, Hyper-V, Xen) have only been around the last five years or so, IBM has a much deeper and robust understanding and long heritage. This helps to set IBM apart from the competition when helping clients.
Clod Barrera is an IBM Distinguished Engineer and Chief Technical Strategist for IBM System Storage. He predicts that by 2015, 10 percent of the servers and storage purchases, as well as 25 percent of the network gear purchases, will be related to Cloud deployments. Cloud Storage is expected to grow at a compound annual growth rate (CAGR) of 32 percent through 2015, compared to only 3.8 percent growth for non-Cloud storage.
Cloud Computing is allowing companies to rethink their IT infrastructure, and reinvent their business. Clod presented an interesting chart on the "Taxonomy" of storage in Cloud environments. On the left he had examples of Storage that was part of a Cloud Compute application. On the right he had storage that was accessed directly through protocols or APIs. Under each he had several examples for transactional data, stream data, backups and archives.
Clod feels the only difference between Private and Public clouds is a matter of ownership. In private clouds, these are owned by the company that uses them via their private Intranet network. Public clouds are owned by Cloud Service providers and are accessed over the public Internet. Clod presented IBM's strategy to deliver Cloud at five levels:
Private Cloud: on-site equipment, behind company firewall, managed by IT staff
Managed Private Cloud: on-site equipment, behind company firewall, managed by IBM or other Cloud Service provider
Hosted Private Cloud: dedicated, off-premises equipment, located and managed by IBM or other Cloud Service Provider, and access through VPN
Shared Cloud Services: shared, off-premises equipment, located at IBM or other Cloud Service Provider, managed by IBM or Cloud Service provider, and access through VPN. The facility is intended for enterprises only, on a contractual basis, and will be auditable for compliance to government regulations, etc.
Public Cloud: shared, off-premises equipment, located and managed by IBM or other Cloud Service provider, targeted to offer cloud compute and storage resources, with standardized platforms of operating systems and middleware, for individuals, small and medium sized businesses.
As with storage in traditional data center deployments, storage in clouds will be tiered, with Tier 0 being the fastest tier, to Tier 4 for "deep and cheap" archive storage. IBM SONAS is an example of Cloud-ready storage that can help make these tiers accessible through standard Ethernet protocols. Cloud Service providers will use metering and Service Level Agreements (SLAs) to offer different rates for different tiers of storage in the cloud.
Clod wrapped up his session explaining IBM's Cloud Computing Reference Architecture (CCRA). This is an all-encompassing diagram that shows how all of IBM's hardware, software and services fit into Cloud deployments.
IBM Information Archive for email, files and eDiscovery
Not too many people have heard of IBM's Smart Archive strategy and the storage products IBM offers to meet compliance regulations. This session covered the following:
The differences between backup and archive, including a few of my own personal horror stories helping companies who had foolishly thought that keeping backup copies for years would adequately serve as their archive strategy
The differences between optical media, Write-Once Read-Many (WORM) media, and Non-Erasable, Non-Rewriteable (NENR) storage options.
Why putting a [space heater] on your data center floor is a bad idea, driving up power and cooling costs for little business value to the enterprise once the unit is full of rarely accessed read-only data.
An overview of the [IBM Information Archive], an integrated stack of servers, storage and software that replaces previous offerings such as the IBM System Storage DR550 and the IBM Grid Medical Archive Solution (GMAS).
The marketing bundle known as the [Information Archive for Email, Files and eDiscovery] that combines the Information Archive storage appliance with Content Collectors for email and file systems, as well as eDiscovery tools, and implementation services for a solution that can support a small or medium size business, up to 1400 employees.
IBM Tivoli Storage Productivity Center v4.2 Overview and Update
Many of the concerns raised when I [presented v4.1 at this conference last year] were addressed this year in v4.2, including full performance statistics for IBM XIV storage system, storage resource agent support for HP-UX and Solaris, and a variety of other issues.
I presented this overview in stages:
"Productivity Center Basic Edition" that comes pre-installed on the IBM System Storage Productivity Center hardware console, that provides discover of devices, basic configuration, and a clever topology viewer of what is connected to what.
"Productivity Center for Disk" and "Productivity Center for Disk Midrange Edition (MRE)" that provides real-time and historical performance monitoring, asset and capacity reporting.
"Productivity Center for Replication" which supports monitoring, failover and failback for FlashCopy, Metro Mirror and Global Mirror on the SVC, Storwize V7000, DS8000, DS6000 and ESS 800.
"Productivity Center for Data" which supports reporting on files, file systems and databases on DAS, SAN and NAS attached storage from a Operating System viewpoint.
"Productivity Center Standard Edition" which includes all of the above except "Replication", and adds performance monitoring of SAN Fabric gear, and some very clever analytics to improver performance and problem determination.
One of the questions that came up was "How big does my company have to be to consider using Productivity Center?" which I answered as follows:
"If you are a small company, and the "IT Person" has responsibilities outside the IT, and managing the few pieces of kit is just part of his job, then consider just using the web-based GUI through a Firefox or similar browser. If you are a medium sized company with dedicated IT personnel, but mostly run by system admins or database admins that manage storage and networks on the side, you might want to consider the "Storage Control" plug-in for IBM Systems Director. But if you are larger shop, and there are employees with the title "Storage Administrator" and/or "SAN Administrator", then Tivoli Storage Productivity Center is for you."
Tivoli Storage Productivity Center has matured into a fine piece of software that truly can help medium and large sized data centers manage their storage and storage networking infrastructure.
I like speaking the first day of these events. Often people come in just to hear the keynote speakers, and stay the afternoon to hear a few break-out sessions before they leave Tuesday or Wednesday for other meetings.
Jim is an IBM Fellow for IBM Systems and Technology Group. There are only 73 IBM Fellows currently working for IBM, and this is the highest honor IBM can bestow on an employee. He has been working with IBM since 1968.
He is tasked with predicting the future of IT, and help drive strategic direction for IBM. Cost pressures, requirements for growth, accelerating innovation and changing business needs help influence this direction.
IBM's approach is to integrate four different "IT building blocks":
Scale-up Systems, like the IBM System Storage DS8000 and TS3500 Tape Library
Resource Pools, such as IBM Storage Pools formed from managed disks by IBM SAN Volume Controller (SVC)
Integrated stacks and appliances, integrated software and hardware stacks, from Storwize V7000 to full rack systems like IBM Smart Analytics Server or CloudBurst.
Mobility of workloads and resources requires unified end-to-end service management. Fortunately, IBM is the #1 leader in IT Service Management solutions.
Jim addressed three myths:
Myth 1: IT Infrastructures will be homogenous.
Jim feels that innovations are happening too rapidly for this to ever happen, and is not a desirable end-goal. Instead, a focus to find the right balance of the IT building blocks might be a better approach.
Myth 2: All of your problems can be solved by replacing everything with product X.
Jim feels that the days of "rip-and-replace" are fading away. As IBM Executive Steve Mills said, "It isn't about the next new thing, but how well new things integrate with established applications and processes."
Myth 3: All IT will move to the Cloud model.
Jim feels a substantial portion of IT will move to the Cloud, but not all of it. There will always be exceptions where the old traditional ways of doing things might be appropriate. Clouds are just one of the many building blocks to choose from.
Jim's focus lately has been finding new ways to take advantage of virtualization concepts. Server, storage and network virtualization are helping address these challenges through four key methods:
Sharing - virtualization that allows a single resource to be used by multiple users. For example, hypervisors allow several guest VM operating systems share common hardware on a single physical server.
Aggregation - virtualization that allows multiple resources to be managed as a single pool. For example, SAN Volume Controller can virtualize the storage of multiple disk arrays and create a single storage pool.
Emulation - virtualization that allows one set of resources to look and feel like a different set of resources. Some hypervisors can emulate different kinds of CPU processors, for example.
Insulation - virtualization that hides the complexity from the end-user application or other higher levels of infrastructure, making it easier to make changes of the underlying managed resources. For example, both SONAS and SAN Volume Controller allow disk capacity to be removed and replaced without disruption to the application.
In today's economy, IT transformation costs must be low enough to yield near-term benefits. The long-term benefits are real, but near-term benefits are needed for projects to get started.
What set's IBM ahead of the pack? Here was Jim's list:
100 Years of Innovation, including being the U.S. Patent leader for the last 18 years in a row
IBM's huge investment in IBM Research, with labs all over the globe
Leadership products in a broad portfolio
Workload-optimized designs with integration from middleware all the way down to underlying hardware
Comprehensive management software for IBM and non-IBM equipment
Clod is an IBM Distinguished Engineer and Chief Technical Strategist for IBM System Storage. His presentation focused on trends and directions in the IT storage industry. Clod started with five workload categories:
To address these unique workload categories, IBM will offer workload-optimized systems. The four drivers on the design for these are performance, efficiency, scalability, and integration. For example, to address performance, companies can adopt Solid-State Drives (SSD). Unfortunately, these are 20 times more expensive dollar-per-GB than spinning disk, and the complexity involved in deciding what data to place on SSD was daunting. IBM solved this with an elegant solution called IBM System Storage Easy Tier, which provides automated data tiering for IBM DS8000, SAN Volume Controller (SVC) and Storwize V7000.
For scalability, IBM has adopted Scale-Out architectures, as seen in the XIV, SVC, and SONAS. SONAS is based on the highly scalable IBM General Parallel File System (GPFS). File systems are like wine, they get better with age. GPFS was introduced 15 years ago, and is more mature than many of the other "scalable file systems" from our competition.
Areal Density advancements on Hard Disk Drives (HDD) are slowing down. During the 1990s, the IT industry enjoyed 60 to 100 percent annual improvement in areal density (bits per square inch). In the 2000s, this dropped to 25 to 40 percent, as engineers are starting to hit various physical limitations.
Storage Efficiency features like compression have been around for a while, but are being deployed in new ways. For example, IBM invented WAN compression needed for Mainframe HASP. WAN compression became industry standard. Then IBM introduced compression on tape, and now compression on tape is an industry standard. ProtecTIER and Information Archive are able to combine compression with data deduplication to store backups and archive copies. Lastly, IBM now offers compression on primary data, through the IBM Real-Time Compression appliance.
For the rest of this decade, IBM predicts that tape will continue to enjoy (at least) 10 times lower dollar-per-GB than the least expensive spinning disk. Disk and Tape share common technologies, so all of the R&D investment for these products apply to both types of storage media.
For integration, IBM is leading the effort to help companies converge their SAN and LAN networks. By 2015, Clod predicts that there will be more FCoE purchased than FCP. IBM is also driving integration between hypervisors and storage virtualization. For example, IBM already supports VMware API for Array Integration (VAAI) in various storage products, including XIV, SVC and Storwize V7000.
Lastly, Clod could not finish a presentation without mentioning Cloud Computing. Cloud storage is expected to grow 32 percent CAGR from year 2010 to 2015. Roughly 10 percent of all servers and storage will be in some type of cloud by 2015.
As is often the case, I am torn between getting short posts out in a timely manner versus spending some more time to improve the length and quality of information, but posted much later. I will spread out the blog posts in consumable amounts throughout the next week or two, to achieve this balance.
Maria Boonie is the IBM Director for IBM Worldwide Training and Technical Conferences. She indicated that there were 1500 attendees this week crossing both the System Storage and System x conferences at this hotel. There are 35 vendors that have sponsored this event, and they will be at the "Solutions Center" being held Monday through Wednesday this week.
She took this opportunity to plug IBM's latest education offerings, including Guaranteed-to-Run implementation classes, and Instructor-Led Online (ILO) technical classes.
Brian Truskowski is IBM General Manager for System Storage and Networking. I used to directly report to him in a previous role, and a few years ago he used to be the IBM CIO that helped with IBM's internal IT transformation.
Brian indicates that the previous approach to growth was to "Just Buy More", but this has some unintended consequences. He argued that companies need to adopt one or more of the following approaches to growth:
Stop storing so much - reduce data footprint using storage efficiency capabilities like data deduplication and compression
Store more with what is already on the floor - improve storage utilization with technologies like storage virtualization and thin provisioning
Move data to the right place - implement automated tiering, such as "Flash & Stash" between Solid-state drives and spinning disk, and/or Information Lifecycle Management (ILM) between disk and tape. Studies at some clients have found over 70 percent of data has not beed touched in the last 90 days
This time of dramatic change is the result of a "perfect storm" of influences, including the rising costs and risks associated with losing data, the increased need to index and search data, the desire for "Business Analytics", and the expectation for 100 percent up-time. This is driving IBM to offer hyper-efficient backup, Continuous Data Availability, and Smart Archive solutions.
The case study of SPRINT is a good example. SPRINT is a Telecommunications provider for cell phone users. They were challenged with 35 percent utilization, 165 storage arrays from six different vendors, and an expected 100 percent increase in their IT maintenance costs. After implementing IBM SAN Volume Controller (SVC) and Tivoli Storage Productivity Center (TPC) to manager 2.9 PB of data, SPRINT increased their utilization to 82 percent, reduced down to 70 storage arrays from only three vendors, and reduced their maintenance costs by 57 percent. Today, SPRINT now manages over 5 PB of data with SVC and TPC, have reduced their power and cooling by 3.5 million KWh, representing $320,000 USD in savings.
Roland Hagan is the IBM Vice President for the System x server platform. He talked about the "IT Conundrum" that represents a vicious cycle of "IT Sprawl", "Untrusted Data" and "Inflexible IT" that seem to feed each other. IBM is trying to change behavior, from thinking and dealing with physical boxes representing servers, storage and network gear, to a more holistic view focused on workloads, shared resource pools, independent scaling, and automated management.
IBM is leading the server marketplace, in part because of clever things IBM is doing, especially in developing the eX5 chipset that surrounds x86 commondity processors, and in part because of actions or decisions the competition have taken:
It doesn't break IBM's heart that Oracle decided to drop software support of their database on Itanium, which focued entirley against HP. Oracle runs on IBM servers better than Oracle/Sun or HP servers today, so it does not impact us, other than IBM has had a lot of people leaving HP to switch over to IBM.
HP has taken on a new CEO and reduced their R&D budget, causing them to be late-to-market on some of their offerings.
Dell continues to focus on the small and medium sized customer, and have not really broken into the "Enterprise".
Newcomer Cisco has some great technology that only seems to be adoptable in "Green Field" situations, as it does not integrate well with existing data center infrastructures.
The combination of ex5 chip-set architecture, Max5 memory expansion capabilities and Virtual Network Interface Cards (NICs), provide for a very VM-aware platform. For those who are not ready to fully adopt an integrated stack like IBM CloudBurst, IBM offers the Tivoli Service Automation software on its own, and a new [IBM BladeCenter Foundation for Cloud] as stepping stones to get there.
There are certainly more attendees here than last year, which reflects either the change in location (Orlando, Florida rather than Washington DC) as well as the economic recovery. I'm looking forward to an excellent week!
It's that time again. Every year, IBM hosts the "System Storage Technical University". I have been going to these since they first started in the 1990s. This time we are at the lovely [Hilton Orlando] in Orlando, Florida.
For those who want to relive past events, here are my blog posts from this event in 2010:
As was the case last year, IBM once again will run this conference alongside the [IBM System x Technical University] the same week, in the same hotel. This allows attendees to cross over to the other side to see a few sessions of the other conference. I took advantage of this last year, and plan to do so again this year as well!
For those on Twitter, you can follow my tweets at [@az990tony] or search on the hash tag #ibmtechu.
Did IBM XIV force EMC's hand to announce VMAXe? Let's take a stroll down memory lane.
In 2008, IBM XIV showed the world that it could ship a Tier-1, high-end, enterprise-class system using commodity parts. Technically, prior to its acquisition by IBM, the XIV team had boxes out in production since 2005. EMC incorrectly argued this announcement meant the death of the IBM DS8000. Just because EMC was unable to figure out how to have more than one high-end disk product, doesn't mean IBM or other storage vendors were equally challenged. Both IBM XIV and DS8000 are Tier-1, high-end, enterprise-class storage systems, as are the IBM N series N7900 and the IBM Scale-Out Network Attached Storage (SONAS).
In April 2009, EMC followed IBM's lead with their own V-Max system, based on Symmetrix Engenuity code, but on commodity x86 processors. Nobody at EMC suggested that the V-Max meant the death of their other Symmetrix box, the DMX-4, which means that EMC proved to themselves that a storage vendor could offer multiple high-end disk systems. Hitachi Data Systems (HDS) would later offer the VSP, which also includes some commodity hardware as well.
In July 2009, analysts at International Technology Group published their TCO findings that IBM XIV was 63 percent less expensive than EMC V-Max, in a whitepaper titled [COST/BENEFIT CASE
FOR IBM XIV STORAGE SYSTEM Comparing Costs for IBM XIV and EMC V-Max Systems]. Not surprisingly, EMC cried foul, feeling that EMC V-Max had not yet been successful in the field, it was too soon to compare newly minted EMC gear with a mature product like XIV that had been in production accounts for several years. Big companies like to wait for "Generation 1" of any new product to mature a bit before they purchase.
To compete against IBM XIV's very low TCO, EMC was forced to either deeply discount their Symmetrix, or counter-offer with lower-cost CLARiiON, their midrange disk offering. An ex-EMCer that now works for IBM on the XIV sales team put it in EMC terms -- "the IBM XIV provides a Symmetrix-like product at CLARiiON-like prices."
(Note: Somewhere in 2010, EMC dropped the hyphen, changing the name from V-Max to VMAX. I didn't see this formally announced anywhere, but it seems that the new spelling is the officially correct usage. A common marketing rule is that you should only rename failed products, so perhaps dropping the hyphen was EMC's way of preventing people from searching older reviews of the V-Max product.)
This month, IBM introduced the IBM XIV Gen3 model 114. The analysts at ITG updated their analysis, as there are now more customers that have either or both products, to provide a more thorough comparison. Their latest whitepaper, titled [Cost/Benefit Case for IBM XIV Systems: Comparing Cost
Structures for IBM XIV and EMC VMAX Systems], shows that IBM maintains its substantial cost savings advantage, representing 69 percent less Total Cost of Ownership (TCO) than EMC, on average, over the course of three years.
In response, EMC announced its new VMAXe, following the naming convention EMC established for VNX and VNXe. Customers cannot upgrade VNXe to VNX, nor VMAXe to VMAX, so at least EMC was consistent in that regard. Like the IBM XIV and XIV Gen3, the new EMC VMAXe eliminated "unnecessary distractions" like CKD volumes and FICON attachment needed for the IBM z/OS operating system on IBM System z mainframes. Fellow blogger Barry Burke from EMC explains everything about the VMAXe in his blog post [a big thing in a small package].
So, you have to wonder, did IBM XIV force EMC's hand into offering this new VMAXe storage unit? Surely, EMC sales reps will continue to lead with the more profitable DMX-4 or VMAX, and then only offer the VMAXe when the prospective customer mentions that the IBM XIV Gen3 is 69 percent less expensive. I haven't seen any list or street prices for the VMAXe yet, but I suspect it is less expensive than VMAX, on a dollar-per-GB basis, so that EMC will not have to discount it as much to compete against IBM.
The new [IBM System Storage Tape Controller 3592 Model C07] is an upgrade to the previous C06 controller. Like the C06, the new 3592-C07 can have up to four FICON (4Gbps) ports, four FC ports, and connect up to 16 drives. The difference is that the C07 supports 8Gbps speed FC ports, and can support the [new TS1140 tape drives that were announced on May 9]. A cool feature of the C07 is that it has a built-in library manager function for the mainframe. On the previous models, you had to have a separate library manager server.
Crossroads ReadVerify Appliance (3222-RV1)
IBM has entered an agreement to resell [Crossroads ReadVerify Appliance], or "RV1" for short. The RV1 is a 1U-high server with software that gathers information on the utilization, performance and health for a physical tape environment, such as an IBM TS3500 Tape Library. The RV1 also offers a feature called "ArchiveVerify" which validates long-term retention archive tapes, providing an audit trail on the readability of tape media. This can be useful for tape libraries attached behind IBM Information Archive compliance storage solution, or the IBM Scale-Out Network Attached Storage (SONAS).
As an added bonus, Crossroads has great videos! Here's one, titled [Tape Sticks]
Linear Tape File System (LTFS) Library Edition Version 2.1
While the hardware is all refreshed, the overall "scale-out" architecture is unchanged. Kudos to the XIV development team for designing a system that is based entirely on commodity hardware, allowing new hardware generations to be introduced with minimal changes to the vast number of field-proven software features like thin provisioning, space-efficient read-only and writeable snapshots, synchronous and asynchronous mirroring, and Quality of Service (QoS) performance classes.
The new XIV Gen3 features an Infiniband interconnect, faster 8Gbps FC ports, more iSCSI ports, faster motherboard and processors, SAS-NL 2TB drives, 24GB cache memory per XIV module, all in a single frame IBM rack that supports the IBM Rear Door Heat Exchanger. The results are a 2x to 4x boost in performance for various workloads. Here are some example performance comparisons:
Disclaimer: Performance is based on measurements and projections using standard IBM benchmarks in a controlled environment. The actual throughput that any user will experience will vary depending upon considerations such as the amount of multiprogramming in the user's job stream, the I/O configuration, the storage configuration, and the workload processed. Therefore, no assurance can be given that an individual user will achieve throughput improvements equivalent to the performance ratios stated here. Your mileage may vary.
In a Statement of Direction, IBM also has designed the Gen3 modules to be "SSD-ready" which means that you can insert up to 500GB of Solid-State drive capacity per XIV module, up to 7.5TB in a fully-configured 15 module frame. This SSD would act as an extension of DRAM cache, similar to how Performance Accelerator Modules (PAM) on IBM N series.
IBM will continue to sell XIV Gen2 systems for the next 12-18 months, as some clients like the smaller 1TB disk drives. The new Gen3 only comes with 2TB drives. There are some clients that love the XIV so much, that they also use it for less stringent Tier 2 workloads. If you don't need the blazing speed of the new Gen3, perhaps the lower cost XIV Gen2 might be a great fit!
As if I haven't said this enough times already, the IBM XIV is a Tier-1, high-end, enterprise-class disk storage system, optimized for use with mission critical workloads on Linux, UNIX and Windows operating systems, and is the ideal cost-effective replacement for EMC Symmetrix VMAX, HDS USP-V and VSP, and HP P9000 series disk systems, . Like the XIV Gen2, the XIV Gen3 can be used with IBM System i using VIOS, and with IBM System z mainframes running Linux, z/VM or z/VSE. If you run z/OS or z/TPF with Count-Key-Data (CKD) volumes and FICON attachment, go with the IBM System Storage DS8000 instead, IBM's other high-end disk system.
Friday - We landed in Paris, France. I have been to Paris many times, but this was a first for Mo. A croissant cost only 2 Euro, but the young woman behind the counter gave me a look of disgust when I asked for a knife and butter to put on the croissant. If you ever get the chance to have a real French croissant, you will realize you don't need any more butter. If you do attempt to put anything on the croissant, it will disintegrate into a million tiny pieces!
2. Visit Ronda
Saturday - We rented a car and drove to the mountain village of [Ronda, Spain], which is in the heart of the region of Spain called Andalucia. Why Ronda? This was where Mo's uncle was stationed during the war. The town is built on two mountains, connected by a set of bridges. The tallest is "Puente Nuevo", built in the 1700s, which is nearly 400 feet tall. Ronda is also home of Spain's oldest Bull Fighting ring. Bars and restaurants built along the cliff offer some spectacular views. Mo and I shared a "Paella Mixta" for lunch, consisting of yellow rice with bits of chicken and seafood.
3. Soak in European Mineral Waters
Sunday - Most things in Europe are closed on Sunday, so we decided to have a "Spa Day" at the [Gran Hotel Benahavis], in Benahavis, Spain. This lovely hotel is built over a natural mineral waters hot spring, and an underground spa allowed us to relax in the warmth. The spa also had a dry sauna, steam sauna, and ice cold water bath to complete the experience.
4. Climb to the Top of the Rock of Gibraltar
Monday - Technically, Gibraltar is a separate country, but they use British money (Pound Sterling). To get to the top of the rock, we drove across their airport runway, saw the mosque at Point Europa, parked in large parking lot and took the cable car to the top. From there, we climbed a few more steps to see the grand views of Spain and North Africa, while keeping our distance from the infamous monkeys. These [Barbary Macaque] are cute, but can bite or scratch you if you get too close. Afterwards, we had lunch in a pub called the Angry Friar.
5. See Snake Charmers in Morocco
Tuesday - We took a guided tour over to the Kingdom of Morocco. This included a ferry boat ride from Tarifa, Spain to Tangier, Morocco. A bus then took us to the "Kasbah" (the fort), where we got to see snake charmers perform their act. We had an interesting lunch, followed by obligatory "shopping opportunities" for rugs and spices. Back on the bus, we went to a place to go ride camels, see the King's palace, and visit the the Grotto of Hercules. The last stop was to sit back and relax for a nice cup of hot Menthol Tea at Cap Spartel, the northernmost point of Morocco.
6. Hang Out at a Mediterranean Beach
Wednesday - Our last full day in Spain, we decided to have lunch on the beach. This region is referred to as Costa Del Sol. We opted for "Playa de la Rada" in Estepona, Spain. The beach was a bit rocky, the sand was hot and uncomfortable to walk on, and the heat and humidity was just slightly less than the steam sauna at the Gran Hotel Benahavis. We stayed in the shade of our beach-side restaurant and had a lunch of grilled sardines and the local Cruzcampo beer.
7. Visit the World of Coca-Cola
Thursday - we drove to Malaga, Spain, and flew back to the United States. Malaga is famous for celebrities like Ernest Hemingway and Pablo Picaso. We could not get all the way back to Tucson, so we stayed overnight in Atlanta.
Friday - This gave us an opportunity to visit the [World of Coca-Cola], where Mo's cousin had done some recent marketing work in celebration of their 125 year anniversary. This is a museum with a live bottling operation on display, a 4D movie, viewing areas to see commercials from around the world, and free tasting, sampling some of the 105 different soft drink flavors manufactured. I recommend the Tawney Ginger from Tanzania, and the Simba Guarana from Brazil. I did not care for the Apple-and-Carrot soda from Japan.
8. See a Manta Ray Up Close
Our discount combo tickets included a visit to the [Georgia Aquarium] next door. Mo can't scuba-dive, but she got stung by a ray when she was a kid, and wanted to show me a big Manta Ray up close. The aquarium was quite good, divided up into separate exhibits, including interactive touch-the-fish areas for the kids, Beluga whales, Jellyfish, Seahorses, and a moving sidewalk that takes you underneath the sea life.
I would like to thank Delta Air Lines for letting Mo and I take this trip using frequent flyer miles, Hertz Rental Cars for offering a sweet deal on a tiny Hyundai i20 car, the Gran Hotel Benahavis for their hospitality, and the incredibly warm and helpful people of Atlanta. I am glad that my language skills in French, Spanish and Arabic came in quite handy!