Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Tony Pearson is a Master Inventor and Senior Software Engineer for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
“In times of universal deceit, telling the truth will be a revolutionary act.”
-- George Orwell
Well, it has been over two years since I first covered IBM's acquisition of the XIV company. Amazingly, I still see a lot of misperceptions out in the blogosphere, especially those regarding double drive failures for the XIV storage system. Despite various attempts to [explain XIV resiliency] and to [dispel the rumors], there are still competitors making stuff up, putting fear, uncertainty and doubt into the minds of prospective XIV clients.
Clients love the IBM XIV storage system! In this economy, companies are not stupid. Before buying any enterprise-class disk system, they ask the tough questions, run evaluation tests, and all the other due diligence often referred to as "kicking the tires". Here is what some IBM clients have said about their XIV systems:
“3-5 minutes vs. 8-10 hours rebuild time...”
-- satisfied XIV client
“...we tested an entire module failure - all data is re-distributed in under 6 hours...only 3-5% performance degradation during rebuild...”
-- excited XIV client
“Not only did XIV meet our expectations, it greatly exceeded them...”
In this blog post, I hope to set the record straight. It is not my intent to embarrass anyone in particular, so instead will focus on a fact-based approach.
Fact: IBM has sold THOUSANDS of XIV systems
XIV is "proven" technology with thousands of XIV systems in company data centers. And by systems, I mean full disk systems with 6 to 15 modules in a single rack, twelve drives per module. That equates to hundreds of thousands of disk drives in production TODAY, comparable to the number of disk drives studied by [Google], and [Carnegie Mellon University] that I discussed in my blog post [Fleet Cars and Skin Cells].
Fact: To date, no customer has lost data as a result of a Double Drive Failure on XIV storage system
This has always been true, both when XIV was a stand-alone company and since the IBM acquisition two years ago. When examining the resilience of an array to any single or multiple component failures, it's important to understand the architecture and the design of the system and not assume all systems are alike. At it's core, XIV is a grid-based storage system. IBM XIV does not use traditional RAID-5 or RAID-10 method, but instead data is distributed across loosely connected data modules which act as independent building blocks. XIV divides each LUN into 1MB "chunks", and stores two copies of each chunk on separate drives in separate modules. We call this "RAID-X".
Spreading all the data across many drives is not unique to XIV. Many disk systems, including EMC CLARiiON-based V-Max, HP EVA, and Hitachi Data Systems (HDS) USP-V, allow customers to get XIV-like performance by spreading LUNs across multiple RAID ranks. This is known in the industry as "wide-striping". Some vendors use the terms "metavolumes" or "extent pools" to refer to their implementations of wide-striping. Clients have coined their own phrases, such as "stripes across stripes", "plaid stripes", or "RAID 500". It is highly unlikely that an XIV will experience a double drive failure that ultimately requires recovery of files or LUNs, and is substantially less vulnerable to data loss than an EVA, USP-V or V-Max configured in RAID-5. Fellow blogger Keith Stevenson (IBM) compared XIV's RAID-X design to other forms of RAID in his post [RAID in the 21st Centure].
Fact: IBM XIV is designed to minimize the likelihood and impact of a double drive failure
The independent failure of two drives is a rare occurrence. More data has been lost from hash collisions on EMC Centera than from double drive failures on XIV, and hash collisions are also very rare. While the published worst-case time to re-protect from a 1TB drive failure for a fully-configured XIV is 30 minutes, field experience shows XIV regaining full redundancy on average in 12 minutes. That is 40 times less likely than a typical 8-10 hour window for a RAID-5 configuration.
A lot of bad things can happen in those 8-10 hours of traditional RAID rebuild. Performance can be seriously degraded. Other components may be affected, as they share cache, connected to the same backplane or bus, or co-dependent in some other manner. An engineer supporting the customer onsite during a RAID-5 rebuild might pull the wrong drive, thereby causing a double drive failure they were hoping to avoid. Having IBM XIV rebuild in only a few minutes addresses this "human factor".
In his post [XIV drive management], fellow blogger Jim Kelly (IBM) covers a variety of reasons why storage admins feel double drive failures are more than just random chance. XIV avoids load stress normally associated with traditional RAID rebuild by evenly spreading out the workload across all drives. This is known in the industry as "wear-leveling". When the first drive fails, the recovery is spread across the remaining 179 drives, so that each drive only processes about 1 percent of the data. The [Ultrastar A7K1000] 1TB SATA disk drives that IBM uses from HGST have specified 1.2 million hours mean-time-between-failures [MTBF] would average about one drive failing every nine months in a 180-drive XIV system. However, field experience shows that an XIV system will experience, on average, one drive failure per 13 months, comparable to what companies experience with more robust Fibre Channel drives. That's innovative XIV wear-leveling at work!
Fact: In the highly unlikely event that a DDF were to occur, you will have full read/write access to nearly all of your data on the XIV, all but a few GB.
Even though it has NEVER happened in the field, some clients and prospects are curious what a double drive failure on an XIV would look like. First, a critical alert message would be sent to both the client and IBM, and a "union list" is generated, identifying all the chunks in common. The worst case on a 15-module XIV fully loaded with 79TB data is approximately 9000 chunks, or 9GB of data. The remaining 78.991 TB of unaffected data are fully accessible for read or write. Any I/O requests for the chunks in the "union list" will have no response yet, so there is no way for host applications to access outdated information or cause any corruption.
(One blogger compared losing data on the XIV to drilling a hole through the phone book. Mathematically, the drill bit would be only 1/16th of an inch, or 1.60 millimeters for you folks outside the USA. Enough to knock out perhaps one character from a name or phone number on each page. If you have ever seen an actor in the movies look up a phone number in a telephone booth then yank out a page from the phone book, the XIV equivalent would be cutting out 1/8th of a page from an 1100 page phone book. In both cases, all of the rest of the unaffected information is full accessible, and it is easy to identify which information is missing.)
If the second drive failed several minutes after the first drive, the process for full redundancy is already well under way. This means the union list is considerably shorter or completely empty, and substantially fewer chunks are impacted. Contrast this with RAID-5, where being 99 percent complete on the rebuild when the second drive fails is just as catastrophic as having both drives fail simultaneously.
Fact: After a DDF event, the files on these few GB can be identified for recovery.
Once IBM receives notification of a critical event, an IBM engineer immediately connects to the XIV using remote service support method. There is no need to send someone physically onsite, the repair actions can be done remotely. The IBM engineer has tools from HGST to recover, in most cases, all of the data.
Any "union" chunk that the HGST tools are unable to recover will be set to "media error" mode. The IBM engineer can provide the client a list of the XIV LUNs and LBAs that are on the "media error" list. From this list, the client can determine which hosts these LUNs are attached to, and run file scan utility to the file systems that these LUNs represent. Files that get a media error during this scan will be listed as needing recovery. A chunk could contain several small files, or the chunk could be just part of a large file. To minimize time, the scans and recoveries can all be prioritized and performed in parallel across host systems zoned to these LUNs.
As with any file or volume recovery, keep in mind that these might be part of a larger consistency group, and that your recovery procedures should make sense for the applications involved. In any case, you are probably going to be up-and-running in less time with XIV than recovery from a RAID-5 double failure would take, and certainly nowhere near "beyond repair" that other vendors might have you believe.
Fact: This does not mean you can eliminate all Disaster Recovery planning!
To put this in perspective, you are more likely to lose XIV data from an earthquake, hurricane, fire or flood than from a double drive failure. As with any unlikely disaster, it is best to have a disaster recovery plan than to hope it never happens. All disk systems that sit on a single datacenter floor are vulnerable to such disasters.
For mission-critical applications, IBM recommends using disk mirroring capability. IBM XIV storage system offers synchronous and asynchronous mirroring natively, both included at no additional charge.
Now that the US Recession has been declared over, companies are looking to invest in IT again. To help you plan your upcoming investments, here are some upcoming events in April.
SNW Spring 2010, April 12-15
IBM is a Platinum Plus sponsor at this [Storage Networking World event], to be held April 12-15 at the Rosen Shingle Creek Resort in Orlando, Florida. If you are planning to go, here's what you can go look for:
IBM booth at the Solution Center featuring the DS8700 and XIV disk systems, SONAS and the Smart Business Storage Cloud (SBSC), and various Tivoli storage software
IBM kiosk at the Platinum Galleria focusing on storage solutions for SAP and Microsoft environments
IBM Senior Engineer Mark Fleming presenting "Understanding High Availability in the SAN"
IBM sponsored "Expo Lunch" on Tuesday, April 13, featuring Neville Yates, CTO of IBM ProtecTIER, presenting "Data Deduplication -- It's not Magic - It's Math!"
IBM CTO Vincent Hsu presenting "Intelligent Storage: High Performance and Hot Spot Elimination"
IBM Senior Technical Staff Member (STSM) Gordon Arnold presenting "Cloud Storage Security"
One-on-One meetings with IBM executives
I have personally worked with Mark, Neville, Vincent and Gordon, so I am sure they will do a great job in their presentations. Sadly, I won't be there myself, but fellow blogger [Rich Swain from IBM] will be at the event to blog about all the actviities there.
Jim Stallings - General Manager, Global Markets, IBM Systems and Technology Group
Scott Handy - Vice President, WW Marketing, Power Systems, IBM Systems and Technology Group
Dan Galvan - Vice President, Marketing & Strategy, Storage and Networking Systems, IBM Systems and Technology Group
Inna Kuznetsova - Vice President, Marketing and Sales Enablement, Systems Software, IBM Systems and Technology Group
Jeanine Cotter - Vice President, Systems Services, IBM Global Technology Services
The webinar will include client testimonials from various companies as well.
Dynamic Infrastructure Executive Summit, April 27-29
I will be there, at this this 2-and-a-half-day [Executive Summit] in Scottsdale, Arizona, to talk to company executives. Discover how IBM can help you manage your ever-increasing amount of information with an end-to-end, innovative approach to building a dynamic infrastructure. You will learn all of our innovative solutions and find out how you can effectively transform your enterprise for a smarter planet.
While clients and IBM executives were in meetings today, in and around the Scottsdale Fairmont resort here in Scottsdale, Arizona, I helped to set up the "Solutions Showcase". There were three stations:
David Ayd and I manned this one, covering storage and server systems. From left to right: a fully-populated 15-module XIV storage system, my laptop running the XIV GUI; two-socket 16-core POWER p770 server, a solid-state drive, PS702 POWER blade, my book Inside System Storage: Volume I, HX5 x86 blade, and four-socket 16-core x3850 M3 server with MAX5 memory extension; David's laptop with various POWER and System x presentations, and our Kaon V-Osk interactive plasma screen display.
Eric Kern manned the Smarter Clouds station. He had live guest images on the IBM Developer and Test cloud, which one the "Best of Interop" award up in Las Vegas this week. I covered IBM's cloud offering in my post [Three Things To Do on the IBM Cloud].
Smarter Data Centers
Ken Schneebeli manned the "Smarter Data Centers" station. He directed people out to the parking lot to see Brian Canney and the Portable Modular Data Center (PMDC). The one here is 8.5 feet by 8.5 feet by 40 feet in size and can be configured and deployed in 12-14 weeks to any location. We can fit any mix of IBM and non-IBM equipment, provided it meets physical dimensions. Want a DS8700 disk system? The PMDC can hold up to 3-frame configurations of the DS8700. Want an eclectic mix of Sun, HP and Dell servers with HDS and EMC disk in your PMDC? IBM can do that too.
After we finished setup, we joined the clients at the "Welcome Reception" on the Lagoon Lawn. The weather was quite pleasant.
Special thanks to Jasdeep Purdhani, Lisa Gates, and Kelly Olson for their help organizing this event.
This week, Tuesday, Wednesday and Thursday, I am at the IBM Dynamic Infrastructure Executive Summit at the beautiful Fairmont Resort in Scottsdale, Arizona. This is a mix of indoor and outdoor meetings, one-on-ones with IBM executives, and main-tent sessions.
The Solutions Showcase will cover the following:
As the bar for performance gets higher and the need to manage, store and analyze massive amounts of information escalates, systems must scale to meet the needs of the business. The latest server and storage technology innovations including: POWER7, eX5, XIV, ProtecTIER, SONAS, and System z Solution Editions.
Smarter Data Centers
Today’s data centers are under extreme power and cooling pressures and space constraints. How can you get more out of your existing facility, while planning for future requirements? IBM energy efficiency consultants will tell you how you can reduce both CAPEX and OPEX costs and plan for future growth with consolidation and virtualization, energy efficient (energy star) equipment and modular data center solutions. Be sure to check out the IBM Portable Modular Data Center (PMDC) that fits in a standard shipping crate!
IBM’s Cloud Computing solutions provide you with flexible, dynamic, secure and cost-efficient delivery choices from pay-per-use (by the hour, week or year) at IBM cloud centers around the world, conditioning your infrastructure to build your own private cloud or out-of-the box cloud solutions that are quick and easy to deploy. Which workloads are the best fit for cloud computing? How do you decide which cloud computing is right for your organization? Cloud experts will talk about the options, give you recommendations based on your business objectives and help you get started.
It seems everyone is talking about stacks, appliances and clouds.
On StorageBod, fellow blogger Martin Glassborow has a post titled [Pancakes!] He feels that everyone from Hitachi to Oracle is turning into the IT equivalent of the International House of Pancakes [IHOP] offering integrated stacks of software, servers and storage.
Cisco introduced its "Unified Computing System" about a year ago, [reinventing the datacenter with an all-Ethernet approach]. Cisco does not offer its own hypervisor software nor storage, so there are two choices. First, Cisco has entered a joint venture, called Acadia, with VMware and EMC, to form the Virtual Computing Environment (VCE) coalition. The resulting stack was named Vblock, which one blogger had hyphenated as Vb-lock to raise awareness to the proprietary vendor lock-in nature of this stack. Second, Cisco, VMware and NetApp had a similar set of [Barney press releases] to announce a viable storage alternative to those not married to EMC.
"Only when it makes sense. Oracle/Sun has the better argument: when you know exactly what you want from your database, we’ll sell you an integrated appliance that will do exactly that. And it’s fine if you roll your own.
But those are industry-wide issues. There are UCS/VCE specific issue as well:
Cost. All the integration work among 3 different companies costs money. They aren’t replacing existing costs – they are adding costs. Without, in theory, charging more.
Lock-in. UCS/Vblock is, effectively, a mainframe with a network backplane.
Barriers to entry. Are there any? Cisco flagged hypervisor bypass and large memory support as unique value-add – and neither seems any more than a medium-term advantage.
BOT? Build, Operate, Transfer. In theory Vblocks are easier and faster to install and manage. But customers are asking that Acadia BOT their new Vblocks. The customer benefit over current integrator practice? Lower BOT costs? Or?
Price. The 3 most expensive IT vendors banding together?
Longevity. Industry “partnerships” don’t have a good record of long-term success. Each of these companies has its own competitive stresses and financial imperatives, and while the stars may be aligned today, where will they be in 3 years? Unless Cisco is piloting an eventual takeover."
Fellow blogger Bob Sutor (IBM) has an excellent post titled
[Appliances and Linux]. Here is an excerpt:
"In your kitchen you have special appliances that, presumably, do individual things well. Your refrigerator keeps things cold, your oven makes them hot, and your blender purees and liquifies them. There is room in a kitchen for each of these. They work individually but when you are making a meal they each have a role to play in creating the whole.
You could go out and buy the metal, glass, wires, electrical gadgets, and so on that you would need to make each appliance but it is is faster, cheaper, and undoubtably safer to buy them already manufactured. For each device you have a choice of providers and you can pay more for additional features and quality.
In the IT world it is far more common to buy the bits and pieces that make up a final solution. That is, you might separately order the hardware components, the operating system, and the applications, and then have someone put them all together for you. If you have an existing configuration you might add more blades or more storage devices.
You don’t have to do this, however, in every situation. Just from a hardware perspective, you can buy a ready-made machine just waiting for the on switch to be flicked and the software installed. Conversely, you might get a pre-made software image with operating system and applications in place, ready to be provisioned to your choice of hardware. We can get even fancier in that the software image might be deployable onto a virtual machine and so be a ready made solution runnable on a cloud.
Thus in the IT world we can talk about hardware-only appliances, software-only appliances (often called virtual software appliances), and complete hardware and software combinations. The last is most comparable to that refrigerator or oven in your kitchen."
If your company was a restaurant, how many employees would you have on hand to produce your own electricity from gas generators, pump your own water from a well, and assemble your own toasters and blenders from wires and motors? I think this is why companies are re-thinking the way they do their own IT.
Rather than business-as-usual, perhaps a mix of pre-configured appliances, consisting of software, server and storage stacked to meet a specific workload, connected to public cloud utility companies, might be the better approach. By 2013, some analysts feel that as many as 20 percent of companies might not even have a traditional IT datacenter anymore.
“By employing techniques like virtualization, automated management, and utility-billing models, IT managers can evolve the internal datacenter into a ‘private cloud’ that offers many of the performance, scalability, and cost-saving benefits associated with public clouds. Microsoft provides the foundation for private clouds with infrastructure solutions to match a range of customer sizes, needs and geographies.
The public cloud:
“Cloud computing is expanding the traditional web-hosting model to a point where enterprises are able to off-load commodity applications to third-party service providers (hosters) and, in the near future, the Microsoft Azure Services Platform. Using Microsoft infrastructure software and Web-based applications, the public cloud allows companies to move applications between private and public clouds.”
Finally, I saw this from fellow blogger, Barry Burke(EMC), aka the Storage Anarchist, titled [a walk through the clouds] which is really a two-part post.
The first part describes a possible future for EMC customers written by EMC employee David Meiri, envisioning a wonderful world with "No more Metas, Hypers, BIN Files...."
The vision is a pleasant one, and not far from reality. While EMC prefers to use the term "private cloud" to refer to both on-premises and off-premises-but-only-your-employees-can-VPN-to-it-and-your-IT-staff-still-manages-it flavors, the overall vision is available today from a variety of Infrastructure-as-a-Service (IaaS), Platform-as-a-Service (PaaS) and Software-as-a-Service (SaaS) providers.
A good analogy for "private cloud" might be a corporate "intranet" that is accessible only within the company's firewall. This allowed internal websites where information to be disseminated to employees could be posted, using standard HTML and standard web browsers that are already deployed on most PCs and workstations. Web pages running on an intranet can easily be moved to an external-facing website without too much rework or trouble.
The second part has Barry claiming that EMC has made progress towards a "Virtual Storage Server" that might be announced at next month's EMC World conference.
When people hear "Storage Virtualization" most immediately think of the two market leaders, IBM SAN Volume Controller and Hitachi Data Systems (HDS) Universal Storage Platform (USP) products. Those with a tape bent might throw in IBM's TS7000 virtual tape libraries or Oracle/Sun's Virtual Storage Manager (VSM). And those focused on software-only solutions might recall Symantec's Veritas Volume Manager (VxVM), DataCore's SANsymphony, or FalconStor's IPStor products.
But what about EMC's failed attempt at storage virtualization, the Invista? After five years of failing to deliver value, EMC has so far only publicised ONE customer reference account, and I estimate that perhaps only a few dozen actual customers are still running on this platform. Compare that to IBM selling tens of thousands of SAN Volume Controllers, and HDS selling thousands of their various USP-V and USP-VM products, and you quickly realize that EMC has a lot of catching up to do. EMC's first delivered Invista about 18 months after IBM SAN Volume Controller, similar to their introduction of Atmos being 18 months after our Scale-Out File Services (SoFS) and their latest CLARiiON-based V-Max coming out 18 months after IBM's XIV storage system.
So what will EMC's Invista follow-on "Virtual Storage Server" product look like? No idea. It might be another five years before you actually hear about a customer using it. But why wait for EMC to get their act together?
IBM offers solutions TODAY that can make life as easy as envisioned here. IBM offers integrated systems sold as ready-to-use appliances, customized "stacks" that can be built to handle particular workloads, residing on-premises or hosted at an IBM facility, and public cloud "as-a-service" offerings on the IBM Cloud.
My colleagues, Harley Puckett (left) and Jack Arnold (right) were highlighted in today's Arizona Daily Star, our local newspaper, as part of an article on IBM's success and leadership in the IT storage industry. At 1400 employees here in Tucson, IBM is Southern Arizona's 36th largest employer.
Highlighted in the article:
DS8700 with the new Easy Tier feature
TS7650 ProtecTIER virtual tape library with data deduplication capability
LTO-5 tape and the new Long Term File System (LTFS)
XIV with the new 2TB drive, for a maximum per-rack usable capacity of 161 TB.
Perhaps E.A.R.T.H. could stand for IBM's "Energy-efficient Archive, Retention, Tape and Hybrid" storage offerings, which combined, had double-digit percent growth in Petabytes shipped (1Q10 versus 1Q09). This helped IBM gain market share. Last week's LTO-5 announcement was made at [NAB Show 2010] by the National Association of Broadcasters. Why? Because many digital media and entertainment people at this conference are interested in getting off "analog video". LTO-5 is 20 times cheaper than professional versions of the BetaMax or VHS tape currently used. So while many are trying to go "tape-less" by switching to disk, like the IBM DCS9900, they are finding that perhaps LTO-5 tape might be the better alternative. A key advantage of LTO-5 is that the cartridges can now be used like DVD-RW or USB thumb drives, with drag-and-drop file capability using the new Long Term File System (LTFS) on the LTO-5 cartridges. This earned a "Pick Hit" at the conference.
Overall, IBM storage revenues grew double digits, which leads me to believe that the worst of the financial melt-down is over, at least from an IT industry perspective. To learn more, see [IBM 1Q10 Financial Results].
Greg and 3PAR's Marc Farley did an "ambush" interview with the folks at the IBM booth at SNW, including Paula Koziol about Twitter, and [Rich Swain] about IBM's latest SONAS product. Here is their post [Storage Monkey business with IBM]:
You can learn more about SONAS from my post [More Details about IBM Clustered NAS]. SONAS is based on software that has been available since 1996, on commodity off-the-shelf server and storage systems, but building a complete system was left as an exercise to the end-user, which many of the top 500 Supercomputers have done.
Back in November 2007, IBM announced Scale-Out File Services (SoFS) which was a set of IBM Global Technical Services to build a customized solution from the software and a set of servers, disk and tape storage. Customized configurations were done for a variety of workloads from Digital Media to Scientific Research High Performance Computing (HPC). Last year, SoFS was renamed to IBM Smart Business Storage Cloud (SBSC).
This year, IBM was able to package all of the software and hardware into an easy to order machine-type model that has everything cabled and ready to use. This is what SONAS is today.
Continuing my discussion of this week's announcements of IBM storage products, I will cover the announcements that double storage capacity per footprint.
Linear Tape Open - Generation 5
IBM announced [LTO-5 drives], the TS2250 half-height and the TS2350 full-height drives, as well as support for LTO-5 drives in its various tape libraries: TS3100, TS3200, and TS3500. The native 1.5TB capacity of the LTO-5 cartridge is nearly double the 800GB capacity of the LTO-4 predecessor. With 2:1 compression, that's 3TB of data per cartridge! Performance-wise, the data transfer rate is 140 MB/sec, about 17 percent improvement over the 120MB/sec of the LTO-4 technology. The TS2250, TS2350, TS3100 and TS3200 now all offer dual-SAS ports for higher availability.
LTO-5 carries forward many of the advancements of past generations. For example, LTO-5 continues the G-2/G-1 "backward compatibility" architecture, which means that the LTO-5 drive can read LTO-3 and LTO-4 cartridges, and can write LTO-4 cartridges. Like the LTO-3 and LTO-4, the same LTO-5 drive can read and write WORM or regular rewriteable cartridges. Like the LTO-4, the LTO-5 offers drive-level data-at-rest encryption. These use a symmetric 256-bit AES key, managed by IBM Tivoli Key Lifecycle Manager (TKLM).
One thing that is new in LTO-5 is the Long Term File System [LTFS] available on the TS2250 and TS2350, which allows you to treat the tape as a hierarchical file system, with files and folders, that you can drag and drop like any other file system.
XIV storage system
IBM [doubles the capacity of the XIV storage system] by supporting 2TB SATA drives. A full 15-module frame can hold up to 161TB of usable capacity. The smallest 6-module system with 2TB can hold up to 55TB of usable capacity. At this time, all of the drives in an XIV must be the same type, so we do not yet allow intermix of 1TB and 2TB in the same frame. The 2TB are more energy efficient, with a full 15-module frame consuming on average 6.7 kVA, compared to 7.8 kVA for the 1TB drives. The performance is roughly the same, so if, for example, your application workload got 3700 IOPS per module with 1TB drives, it will get about the same 3700 IOPS per module with 2TB drives.
The EXN1000 and EXN3000 can now double in capacity with 2TB SATA drives. These can be attached to the N3000 entry-level models, such as the N3400.
DS3000 disk system
The DS3200, DS3300 and DS3400, as well as their related expansion drawers, now supports 2TB SATA drives. This means that a single control unit with three expansion drawers can hold up to 96TB of raw capacity (48 drives).
DS8700 disk system
The DS8700 also now supports 2TB SATA drives, for a maximum raw capacity over 2PB, as well as new 600GB Fibre Channel drives. Now that IBM offers [Easy Tier] functionality, pairing Solid State Drives with slower, energy-efficient SATA disk makes a lot of financial sense.
That's a lot of announcements! As always, feel free to dig into each of the links to learn more about each product.
Well, it's Tuesday, and that means IBM announcements!
IBM kicks EMC in the teeth with the announcement of System Storage Easy Tier, a new feature available at no additional charge on the DS8700 with the R5.1 level microcode. Barry Whyte introduces the concept in his [post this morning]. I will use SLAM (sub-LUN automatic movement) to refer generically to IBM Easy Tier and EMC FAST v2. EMC has yet to deliver FAST v2, and given that they just recently got full-LUN FAST v1 working a few months ago, it might be next year before you see EMC sub-LUN FAST v2.
Here are the key features of Easy Tier on the DS8700:
Sub-LUN Automatic Movement
IBM made it really easy to implement this on the DS8700. Today, you have "extent pools" that can be either SSD-only or HDD-only. With this new announcement, we introduce "mixed" SSD+HDD extent pools. The hottest extents are moved to SSD, and cooler extents are moved down to HDD. The support applies to both Fixed block architecture (FBA) LUNs as well as Count-Key-Data (CKD) volumes. In other words, an individual LUN or CKD volume can have some of its 1GB extents on SSD and other extents on FC or SATA disk.
Entire-LUN Manual Relocation
Entire-LUN Manual Relocation (ELMR, pronounced "Elmer"?) is similar to what EMC offers now with FAST v1. With this feature, you can now relocate an entire LUN non-disruptively from any extent pool to any other extent pool. You can relocate LUNs from an SSD-only or HDD-only pool over to a new Easy Tier-managed "mixed" pool, or take a LUN out of Easy Tier management by moving it to an SSD-only or HDD-only pool. Of course, this support also applies to both Fixed block architecture (FBA) LUNs as well as Count-Key-Data (CKD) volumes.
This feature also can be used to relocate LUNs and CKD volumes from FC to SATA pools, from RAID-10 to RAID-5 pools, and so on.
What if you already have SSD-only and HDD-only pools and want to use Easy Tier? You can now merge pools to create a "mixed" pool.
Before this announcement, you had to buy 16 solid-state drives at a time, called Mega-packs. Now, you can choose to buy just 8 SSD at a time, called Mini-packs. It turns out that just moving as little as 10 percent of your data from Fibre Channel disk over to Solid-State with Easy Tier can result in up to 300 to 400 percent performance improvement. IBM plans to publish formal SPC-1 benchmark results using Easy Tier-managed mixed extent pool in a few weeks.
Storage Tier Advisor Tool (STAT)
Don't have SSD yet, or not sure how awesome Easy Tier will be for your data center? The IBM Storage Tier Advisor Tool will analyze your extents and estimate how much benefit you will derive if you implement Easy Tier with various amounts of SSD. Those clients with R5.1 microcode on their DS8700 can download from the [DS8700 FTP site].