Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Tony Pearson is a Master Inventor and Senior Software Engineer for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
Last week, I presented IBM's strategic initiative, the IBM Information Infrastructure, which is part of IBM's New Enterprise Data Center vision. This week, I will try to get around to talking about some of theproducts that support those solutions.
I was going to set the record straight on a variety of misunderstandings, rumors or speculations, but I think most have been taken care of already. IBM blogger BarryW covered the fact that SVC now supports XIV storage systems, in his post[SVC and XIV],and addressed some of the FUD already. Here was my list:
Now that IBM has an IBM-branded model of XIV, IBM will discontinue (insert another product here)
I had seen speculation that XIV meant the demise of the N series, the DS8000 or IBM's partnership with LSI.However, the launch reminded people that IBM announced a new release of DS8000 features, new models of N series N6000,and the new DS5000 disk, so that squashes those rumors.
IBM XIV is a (insert tier level here) product
While there seems to be no industry-standard or agreement for what a tier-1, tier-2 or tier-3 disk system is, there seemed to be a lot of argument over what pigeon-hole category to put IBM XIV in. No question many people want tier-1 performance and functionality at tier-2 prices, and perhaps IBM XIV is a good step at giving them this. In some circles, tier-1 means support for System z mainframes. The XIV does not have traditional z/OS CKD volume support, but Linux on System z partitions or guests can attach to XIV via SAN Volume Controller (SVC), or through NFS protocol as part of the Scale-Out File Services (SoFS) implementation.
Whenever any radicalgame-changing technology comes along, competitors with last century's products and architectures want to frame the discussion that it is just yet another storage system. IBM plans to update its Disk Magic and otherplanning/modeling tools to help people determine which workloads would be a good fit with XIV.
IBM XIV lacks (insert missing feature here) in the current release
I am glad to see that the accusations that XIV had unprotected, unmirrored cache were retracted. XIV mirrors all writes in the cache of two separate modules, with ECC protection. XIV allows concurrent code loadfor bug fixes to the software. XIV offers many of the features that people enjoy in other disksystems, such as thin provisioning, writeable snapshots, remote disk mirroring, and so on.IBM XIV can be part of a bigger solution, either through SVC, SoFS or GMAS that provide thebusiness value customers are looking for.
IBM XIV uses (insert block mirroring here) and is not as efficient for capacity utilization
It is interesting that this came from a competitor that still recommends RAID-1 or RAID-10 for itsCLARiiON and DMX products.On the IBM XIV, each 1MB chunk is written on two different disks in different modules. When disks wereexpensive, how much usable space for a given set of HDD was worthy of argument. Today, we sell you abig black box, with 79TB usable, for (insert dollar figure here). For those who feel 79TB istoo big to swallow all at once, IBM offers "capacity on demand" pricing, where you can pay initially for as littleas 22TB, but get all the performance, usability, functionality and advanced availability of the full box.
IBM XIV consumes (insert number of Watts here) of energy
For every disk system, a portion of the energy is consumed by the number of hard disk drives (HDD) andthe remainder to UPS, power conversion, processors and cache memory consumption. Again, the XIV is a bigblack box, and you can compare the 8.4 KW of this high-performance, low-cost storage one-frame system with thewattage consumed by competitive two-frame (sometimes called two-bay) systems, if you are willing to take some trade-offs. To getcomparable performance and hot-spot avoidance, competitors may need to over-provision or use faster, energy-consuming FC drives, and offer additional software to monitor and re-balance workloads across RAID ranks.To get comparable availability, competitors may need to drop from RAID-5 down to either RAID-1 or RAID-6.To get comparable usability, competitors may need more storage infrastructure management software to hide theinherent complexity of their multi-RAID design.
Of course, if energy consumption is a major concern for you, XIV can be part of IBM's many blended disk-and-tapesolutions. When it comes to being green, you can't get any greener storage than tape! Blended disk-and-tapesolutions help get the best of both worlds.
Well, I am glad I could help set the record straight. Let me know what other products people you would like me to focus on next.
Continuing this week's theme about new products that were mentioned in last week's launch, today I willcover the new [S24 and S54 frames].
Before these new frames, customers had two choices for their tape cartridges: keep them in an automatedtape library, or on an external shelf. Most of the critics of tape focus almost entirely on the problemsrelated to the latter. When tapes are placed outside of automation, you need human intervention to findand fetch the tapes, tapes can be misplaced or misfiled, tapes can be dropped, tapes can get liquids spilledon them, and so on. These problems just don't happen when stored in automated tape libraries.
Until now, the number of cartridges were limited to the surface area of the wall accessible by the roboticpicker. Whether the robot rotates in a circle picking from dodecagon walls, or back and forth from longrectangular walls, the problem was the same.
But what about tapes that may not need to be readily accessible, but still automated? With the newhigh density frames, you can now stack tapes several cartridges deep, spring loaded deep shelves thatpush the tape cartridges up to the front one at a time. The high-density frame design might have been inspired by thefamous [Pez] candy dispenser, but at 70.9 inches, does not beat the[World's Tallest Pez Dispenser].
(Note: PEZ® is a registered trademark of Pez Candy, Inc.)
In a regular cartridge-only frame, like the D23, you have slots for 200 cartridges on the left, and 200 cartridges on the right, and the robotic picker can pull out and push back cartridges into any of theseslot positions. In the new S24, there are still 200 slots on the left, now referred to as "tier 0",but up to 800 cartridges on the right. In each slot there are up to four 3592 cartridges, the positionimmediately reachable to the picker is referred to as "tier 1", and the ones tucked behindare "tier 2", "tier 3" and "tier 4".
<- - - S24 frame - - - >
We have fun slow-motion videos we show customers on how these work. For example, in the diagram above, let'ssuppose you want to fetch Tape E in the "tier 4" position. The following sequence happens:
Robotic picker pulls "tier 1" tape cartridge B, and pushes it into another shelf slot. Tapes C, D and E get pushed up to be Tiers 1, 2 and 3 now.
Robotic picker pulls "tier 1" tape cartridge C, and puts it in another shelf slot. Tapes D and E get pushed up to be Tiers 1 and 2 now.
Robotic picker pulls "tier 1" tape cartridge D, and puts it in another shelf slot. Tape E gets pushed up to be Tier 1 now.
Robotic picker pulls "tier 1" tape cartridge E, this is the tape we wanted, and can move it to the drive.
The other three cartridges (B, C and D) are then pulled out of the temporary slot, and pushed back into their original order.
In this manner, the most recently referenced tape cartridges will be immediately accessible, and the ones leastreferenced will eventually migrate to the deeper tiers. The 3592 cartridges can be used with either TS1120 orTS1130 drives. Each cartridge can hold up to 3TB of data (1TB raw, at 3:1 compression), so the entire framecould hold 3PB in just 10 square feet of floor space. Five D23 frames could be consolidated down to two S24 frames.The S24 frame comes in "Capacity on Demand" pricing options. The base model of the S24 has just tiers 0, 1 and 2, for a total capacity of 600 cartridges. You can then later license tiers 3 and 4 when needed.
The S54 is basically similar in operation, but for LTO cartridges. It works with any mix of LTO-1, LTO-2, LTO-3 andLTO-4 cartridges.The left side holds tier 0 as before, but the right side has up to five LTO cartridges deep. For Capacity on Demand pricing,the base model supports 660 cartridges (tiers 0,1,2), with options to upgrade for the additional 660 cartridges.The total 1320 cartridges could hold up to 2.1 PB of data (at 2:1 compression). One S54 frame could replacethree traditional S53 frames that held only 440 LTO cartridges each.
If you have both TS1100 series and LTO drives in your TS3500 tape library, then you can haveboth S24 and S54 frames side by side.
In Monday's post, [IBM Information Infrastructure launches today], I explained how this strategic initiative fit into IBM's New EnterpriseData Center vision. The launch was presented at the IBM Storage and Storage Networking Symposium to over 400 attendeesin Montpelier, France, with corresponding standing-room-only crowds in New York and Tokyo.
This post will focus on Information Retention, the third of the four-part series this week.
Here's another short 2-minute video, on Information Retention
Let's start with some interesting statistics.Fellow blogger Robin Harris on his StorageMojo blog has an interesting post:[Our changing file workloads],which discusses the findings of study titled"Measurement and Analysis of Large-Scale Network File System Workloads"[14-page PDF]. This paper was a collaborationbetween researchers from University of California Santa Cruz and our friends at NetApp.Here's an excerpt from the study:
Compared to Previous Studies:
Both of our workloads are more write-oriented. Read to write byte ratios have significantly decreased.
Read-write access patterns have increased 30-fold relative to read-only and write-only access patterns.
Most bytes are transferred in longer sequential runs. These runs are an order of magnitude larger.
Most bytes transferred are from larger files. File sizes are up to an order of magnitude larger.
Files live an order of magnitude longer. Fewer than 50 percent are deleted within a day of creation.
Files are rarely re-opened. Over 66 percent are re-opened once and 95% fewer than five times.
Files re-opens are temporally related. Over 60 percent of re-opens occur within a minute of the first.
A small fraction of clients account for a large fraction of file activity. Fewer than 1 percent of clients account for50 percent of file requests.
Files are infrequently shared by more than one client. Over 76 percent of files are never opened by more than one client.
File sharing is rarely concurrent and sharing is usually read-only. Only 5 percent of files opened by multiple clients are concurrent and 90 percent of sharing is read-only.
Most file types do not have a common access pattern.
Why are files being kept ten times longer than before? Because the information still has value:
Provide historical context
Gain insight to specific situations, market segment demographics, or trends in the greater marketplace
Help innovate new ideas for products and services
Make better, smarter decisions
National Public Radio (NPR) had an interesting piece the other day. By analyzing old photos, a researcher for Cold War Analysis was able to identify an interesting [pattern for Russian presidents]. (Be sure to listen to the 3-minute audio to hear a hilarious song about the results!)
Which brings me to my own collection of "old photos". I bought my first digital camera in the year 2000,and have taken over 15,000 pictures since then. Before that,I used 35mm film camera, getting the negatives developed and prints made. Some of these date back to my years in High School and College. I have a mix of sizes, from 3x5, 4x6 and 5x7 inches,and sometimes I got double prints.Only a small portion are organized intoscrapbooks. The rest are in envelopes, prints and negatives, in boxes taking up half of my linen closet in my house.Following the success of the [Library of Congress using flickr],I decided the best way to organize these was to have them digitized first. There are several ways to do this.
This method is just too time consuming. Lift the lid place 1 or a few prints face down on the glass, close the lid,press the button, and then repeat. I estimate 70 percent of my photos are in [landscape orientation], and 30 percent in [portrait mode]. I can either spend extra time toorient each photo correctly on the glass, or rotate the digital image later.
I was pleased to learn that my Fujitsu ScanSnap S510 sheet-feed scanner can take in a short stack (dozen or so) photos, and generate JPEG format files for each. I can select 150, 300 or 600dpi, and five levels of JPEG compression.All the photos feed in portrait mode, which I can then rotate later on the computer once digitized.A command line tool called [ImageMagick] can help automate the rotations.While I highly recommend the ScanSnap scanner, this is still a time-consuming process for thousands of photos.
"The best way to save your valuable photos may be by eliminating the paper altogether. Consider making digital images of all your photos."
Here's how it works:You ship your prints (or slides, or negatives) totheir facility in Irvine, California. They have a huge machine that scans them all at 300dpi, no compression, andthey send back your photos and a DVD containing digitized versions in JPEG format, all for only 50 US dollars plusshipping and handling, per thousand photos. I don't think I could even hire someone locally to run my scanner for that!
The deal got better when I contacted them. For people like me with accounts on Facebook, flickr, MySpace or Blogger,they will [scan your first 1000 photos for free] (plus shipping and handling). I selected a thousand 4x6" photos from my vast collection, organized them into eight stacks with rubber bands,and sent them off in a shoe box. The photos get scanned in landscape mode, so I had spent about four hours in preparing what I sent them, making sure they were all face up, with the top of the picture oriented either to the top or left edge.For the envelopes that had double prints, I "deduplicated" them so that only one set got scanned.
The box weighed seven pounds, and cost about 10 US dollars to send from Tucson to Irvinevia UPS on Tuesday. They came back the following Monday, all my photos plus the DVD, for 20 US dollars shipping and handling. Each digital image is about 1.5MB in size, roughly 1800x1200 pixels in size, so easily fit on a single DVD. The quality is the sameas if I scanned them at 300dpi on my own scanner, and comparable to a 2-megapixel camera on most cell phones.Certainly not the high-res photos I take with my Canon PowerShot, but suitable enough for email or Web sites. So, for about 30 US dollars, I got my first batch of 1000 photos scanned.
ScanMyPhotos.com offers a variety of extra priced options, like rotating each file to the correct landscape or portrait orientation, color correction, exact sequence order, hosting them on their Web site online for 30 days to share with friends and family, and extra copies of the DVD.All of these represent a trade-off between having them do it for me for an additional fee, or me spending time doing it myself--either before in the preparation, or afterwards managing the digital files--so I can appreciate that.
Perhaps the weirdest option was to have your original box returned for an extra $9.95? If you don't have a hugecollection of empty shoe boxes in your garage, you can buy a similarly sized cardboard box for only $3.49 at the local office supply store, so I don't understand this one. The box they return all your photos in can easily be used for the next batch.
I opted not to get any of these extras. The one option I think they should add would be to have them just discardthe prints, and send back only the DVD itself. Or better yet, discard the prints, and email me an ISO file of the DVD that I can burn myself on my own computer.Why pay extra shipping to send back to me the entire box of prints, just so that I can dump the prints in the trash myself? I will keep the negatives, in case I ever need to re-print with high resolution.
Overall, I am thoroughlydelighted with the service, and will now pursue sending the rest of my photos in for processing, and reclaim my linen closet for more important things. Now that I know that a thousand 4x6 prints weighs 7 pounds, I can now estimate how many photos I have left to do, and decide on which discount bulk option to choose from.
With my photos digitized, I will be able to do all the things that IBM talks about with Information Retention:
Place them on an appropriate storage tier. I can keep them on disk, tape or optical media.
Easily move them from one storage tier to another. Copying digital files in bulk is straightforward, and as new techhologies develop, I can refresh the bits onto new media, to avoid the "obsolescence of CDs and DVDs" as discussed in this article in[PC World].
Share them with friends and family, either through email, on my Tivo (yes, my Tivo is networked to my Mac and PC and has the option to do this!), or upload themto a photo-oriented service like [Kodak Gallery or flickr].
Keep multiple copies in separate locations. I could easily burn another copy of the DVD myself and store in my safe deposit box or my desk at work.With all of the regional disasters like hurricanes, an alternative might be to backup all your files, including your digitized photos, with an online backup service like [IBM Information Protection Services] from last year's acquisition of Arsenal Digital.
If the prospect of preserving my high school and college memories for the next few decades seems extreme,consider the [Long Now Foundation] is focused on retaining information for centuries.They areeven suggesting that we start representing years with five digits, e.g., 02008, to handle the deca-millennium bug which will come into effect 8,000 years from now. IBM researchers are also working on [long-term preservation technologies and open standards] to help in this area.
For those who only read the first and last paragraphs of each post, here is my recap:Information Retention is about managing [information throughout its lifecycle], using policy-based automation to help with the placement, movement and expiration. An "active archive" of information serves to helpgain insight, innovate, and make better decisions. Disk, tape, and blended disk-and-tape solutions can all play a part in a tiered information infrastructure for long-term retention of information.
Continuing my quest to "set the record straight" about [IBM XIV Storage System] and IBM's other products, I find myself amused at some of the FUD out there. Some are almost as absurd as the following analogy:
Humans share over 50 percent of DNA with bananas. [source]
If you peel a banana, and put the slippery skin down on the sidewalk outside your office building, it couldpose a risk to your employees
If you peel a human, the human skin placed on the sidewalk in a similar manner might also pose similar risks.
Mr. Jones, who applied for the opening in your storage administration team, is a human being.
You wouldn't hire a banana to manage your storage, would you? This might be too risky!
The conclusion we are led to believe is that hiring Mr. Jones, a human being, is as risky as puttinga banana peel down on the sidewalk. Some bloggers argue that they are merely making a series of factual observations,and letting their readers form their own conclusions. For example, the IBM XIV storage system has ECC-protected mirrored cache writes. Some false claims about this were [properly retracted]using strike out font to show the correction made, other times the same statement appears in another post from the same blogger that[have not yet beenretracted] (Update: has now been corrected). Other bloggers borrow the false statement [for their own blog], perhaps not realizing theretractions were made elsewhere. Newspapers are unable to fix a previous edition, so are forced to publishretractions in future papers. With blogs, you can edit the original and post the changed version, annotated accordingly, so mistakes can be corrected quickly.
While it is possible to compare bananas and humans on a variety of metrics--weight, height, and dare I say it,caloric value--it misses the finer differences of what makes them different. Humans might share 98 percent withchimpanzees, but having an opposable thumb allows humans to do things that chimpanzeesother animals cannot.
Full Disclosure: I am neither vegetarian nor cannibal, and harbor no ill will toward bananas nor chimpanzees.No bananas or chimpanzees were harmed in the writing of this blog post. Any similarity between the fictitiousMr. Jones in the above analogy and actual persons, living or dead, is purely coincidental.
So let's take a look at some of IBM XIV Storage System's "opposable thumbs".
The IBM XIV system comes pre-formatted and ready to use. You don't have to spend weeks in meetings deciding betweendifferent RAID levels and then formatting different RAID ranks to match those decisions. Instead, you can start using the storage on the IBM XIV Storage System right away.
The IBM XIV offers consistent performance, balancing I/O evenly across all disk drive modules, even when performing SnapShot processing, or recovering from component failure. You don't have to try to separate data to prevent one workload from stealing bandwidth from another. You don't have to purchase extra software to determine where the "hot spots" are on the disk. You don't have to buy othersoftware to help re-locate and re-separate the data to re-balance the I/Os. Instead, you just enjoy consistentperformance.
The IBM XIV offers thin provisioning, allowing LUNs to grow as needed to accommodate business needs. You don'thave to estimate or over-allocate space for planned future projects. You don't have to monitor if a LUN is reaching80 or 90 percent full. You don't have to carve larger and larger LUNs and schedule time on the weekends to move thedata over to these new bigger spaces. Instead, you just write to the disk, monitoring the box as a whole, ratherthan individual LUNs.
The IBM XIV Storage System's innovative RAID-X design allows drives to be replaced with drives of any larger or smaller capacity. You don't have to find the exact same 73GB 10K RPM drive to match the existing 73GB 10K RPM drive that failed. Some RAID systems allow "larger than original" substitutions, for example a 146GB drive to replace a 73GB drive, but the added capacity is wasted, because of the way most RAID levels work. The problemis that many failures happen 3-5 years out, and disk manufacturers move on to bigger capacities and differentform factors, making it sometimes difficult to find an exact replacement or forcing customers to keep their own stockof spare drives. Instead, with the IBM XIV architecture, you sleep well at night, knowing it allows future drive capacities to act as replacements, and getting the full value and usage of that capacity.
In the case of IBM XIV Storage System, it is not clear whether
"Vendors" are those from IBM and IBM Business Partners, including bloggers like me employed by IBM,and "everybody else" includes IBM's immediate competitors, including bloggers employed by them.
-- or --
"Vendors" includes IBM and its competitors including any bloggers, so that "everybody else" refers instead to anyone not selling storage systems, but opinionated enough to not qualify as "objective third-party sources".
-- or --
"Vendors" includes official statements from IBM and its competitors, and "everybody else" refers to bloggerspresenting their own personal or professional opinions, that may or may not correspond to their employers.
That said, feel free to comment below on which of these you think the last two points of Steinhardt's rule istrying to capture. Certainly, I can't argue with the top two: a customer's own experience and the experiencesof other customers, which I mentioned previously in my post[Deceptively Delicious].
In that light, here is a 5-minute video on IBM TV with a customer testimonial from the good folksat [NaviSite], one of our manycustomer references for the IBM XIV Storage System.
Well, it's Tuesday again, which means IBM announcement day. With our [big launches] we had this year, there might be some confusion on IBM terminology on how announcements are handled.Basically, there are three levels:
Technology demonstrations show IBM's leadership, innovation and investment direction, without having to detail a specificproduct offering.Last month's[Project Quicksilver], for example, demonstrated the ability to handle over 1 million IOPS with Solid State Disk.IBM is committed to develop solid state storage to create real-world uses across a broad range of applications, middleware, and systems offerings.
A preview announcement does entail a specific product offering, but may not necessarily include pricing, packagingor specific availability dates.
An announcement also entails a specific product offering, and does include pricing, packaging and specific availability dates.
With our September 8 launch of the IBM Information Infrastructure strategic initiative, there were a mix of all three of these. Many of the preview announcements will be followed up with full announcements later this year. Today, the IBM Tivoli Advanced Backup andRecovery for z/OS v2.1 was announced.
Note: If you don't use z/OS on a System z mainframe, you can stop reading now.
As many of my loyal readers know, I was lead architect for DFSMS until 2001, and so functions related to DFSMS and z/OS are very near and dear to my heart. For Business Continuity, IBM created Aggregate Backup andRecovery Support (ABARS) as part of the DFSMShsm component. This feature created a self-contained backupimage from data that could be either on disk or tape, including migrated data. In the event of a disaster,an ABARS backup image can be used to bring back just the exact programs and data needed for a specific application, speeding up the recovery process, and allowing BC/DR plans to prioritize what is most important.
To help manage ABARS, IBM has partnered with [Mainstar Software Corporation]to offer a product that helps before, during and after the ABARS processing.
ABARS requires the storage admin to have a "selection list" of data sets to process as an aggregate.IBM Tivoli Advanced Backup and Recovery for z/OS includes Mainstar® ASAP™ to help identify the appropriatedata sets for specific applications, using information from job schedulers, JCL, and SMF records.
ABARS has two simple commands: ABACKUP to produce the backup image, and ARECOVER to recover it. However, ifyou have hundreds of aggregates, and each aggregate has several backups, you may need some help identifyingwhich image to recover from.IBM Tivoli Advanced Backup and Recovery for z/OS includes Mainstar® ABARS Manager™ to present a list ofinformation, making it easy to choose from. To help prep the ICF Catalogs, there is a CATSCRUB feature for either"empty" or "full" catalog recovery at the recovery site.
The fact that storage admins may not be intimately familiar with the applications they are backing up is a commonsource of human error. IBM Tivoli Advanced Backup and Recovery for z/OS includes Mainstar® All/Star™ to help validate that the data setsprocessed by ABACKUP are complete, to support any regulatory audit or application team verification.This critical data tracking/inventory reporting not only identifies what isn't backed up, so you can ensure that you are not missing critical data, but also can identify which data sets are being backed up multiple times by more than one utility, so you can reduce the occurrence of redundant backups.
With v2.1 of Tivoli Advanced Backup and Recovery for z/OS, IBM has integrated Tivoli Enterprise Portal (TEP)support. This allows you to access these functions through IBM Tivoli Monitor v6 GUI on a Linux, UNIX or Windowsworkstation. IBM Tivoli Monitor has full support to integrate Web 2.0, multi-media and frames. This meansthat any other product that can be rendered in a browser can be embedded and supported with launch-in-contextcapability.
(If you have not separately purchased a license to IBM Tivoli Monitoring V6.2, don't worry, you can obtainthe TEP-based function by acquiring a no-charge, limited use license to IBM Tivoli MonitoringServices on z/OS, V6.2.)
In addition to supporting IBM's many DFSMS backup methods, from ABARS to IDCAMS to IEBGENER, IBM Tivoli Advanced Backup and Recovery v2.1 can also support third-party products from Innovation Data Processing and Computer Associates.
As many people re-discover the mainframe as the cost-effective platform that it has always been, migratingapplications back to the mainframe to reduce costs, they need solutions that work across both mainframe anddistributed systems during this transition. IBM Tivoli Advanced Backup and Recovery for z/OS can help.
Continuing this week's theme on customer references of IBM's solutions, today I will discussthe success at Kantana Animation Studios.
Here is a 3-minute video from the good folks at Kantana Animation Studios,part of the [Kantana Group].They produced the animated movie [Khan Kluay]using IBM Scale-out File Services (SoFS), a product IBM announced last November 2007.
As a film-maker myself (see this sample [Highlights clip])and active member of the Tucson Film Society,I am pleased to see IBM so greatly involved in the film industry. I've had the pleasure to visit some of theseanimation studios myself and meet with other film-makers at various conferences.
For more details on Kantana's implementation, see the [Case Study]
In Monday's post, [IBM Information Infrastructure launches today], I explained how this strategic initiative fit into IBM's New EnterpriseData Center vision. For you podcast fans, IBM Vice Presidents Bob Cancilla (Disk Systems), Craig Smelser (Storage and Security Software), and Mike Riegel (Information Protection Services), highlight some of the new products and offerings in this 12-minute recording:
This post will focus on Information Security, the second of the four-part series this week.
Here's another short 2-minute video, on Information Security
Security protects information against both internal and external threats.
For internal threats, most focus on whether person A has a "need-to-know" about information B. Most of the time, thisis fairly straightforward. However, sometimes production data is copied to support test and development efforts. Here is the typical scenario: the storage admin copies production data that contains sensitive or personal informationto a new copy and authorizes software engineers or testers full read/write access to this data.In some cases, the engineers or testers may be employees, other times they might be hired contractors from an outside firm.In any case, they may not be authorized to read this sensitive information. To solve this IBM announced the[IBM Optim Data Privacy Solution] for a variety of environments, including Siebel and SAP enterprise resource planning (ERP)applications.
I found this solution quite clever. The challenge is that production data is interrelated and typically liveinside [relational databases].For example, one record in one database might have a name and serial number, and then that serial number is used to reference a corresponding record in another database. The IBM Optim Data Privacy Solution applies a range of"masks" to transform complex data elements such as credit card numbers, email addresses and national identifiers, while retaining their contextual meaning. The masked results are fictitious, but consistent and realistic, creating a “safe sandbox” for application testing. This method can mask data from multiple interrelated applications to create a “production-like” test environment that accurately reflects end-to-end business processes.The testers get data they can use to validate their changes, and the storage admins can rest assured theyhave not exposed anyone's sensitive information.
Beyond just who has the "need-to-know", we might also be concerned with who is "qualified-to-act".Most systems today have both authentication and authorization support. Authentication determines that youare who you say you are, through the knowledge of unique userid/passwords combinations, or other credentials. Fingerprint, eye retinal scans or other biometrics look great in spy movies, but they are not yetwidely used. Instead, storage admins have to worry about dozens of different passwords on differentsystems. One of the many preview announcements made by Andy Monshaw on Monday's launch was that IBM isgoing to integrate the features of [Tivoli Access Manager for Enterprise Single Sign-On] into IBM's Productivity Center software, and be renamed "IBM Tivoli Storage Productivity Center".You enter one userid/password, and you will not have to enter the individual userid/password of all the managedstorage devices.
Once a storage admin is authenticated,they may or may not be authorized to read or act on certain information.Productivity Center offers role-based authorization, so that people can be identifiedby their roles (tape operator, storage administrator, DBA) and that would then determine what they areauthorized to see, read, or act upon.
For external threats, you need to protect data both in-flight and at-rest. In-flight deals with data thattravels over a wire, or wirelessly through the air, from source to destination. When companies have multiplebuildings, the transmissions can be encrypted at the source, and decrypted on arrival.The bigger threat is data at-rest. Hackers and cyber-thieves looking to download specific content, like personal identifiable information, financial information, and other sensitive data.
IBM was the first to deliver an encrypting tape drive, the TS1120. The encryption process is handled right at the driveitself, eliminating the burden of encryption from the host processing cycles, and eliminating the need forspecialized hardware sitting between server and storage system. Since then, we have delivered encryption onthe LTO-4 and TS1130 drives as well.
When disk drives break or are decommissioned, the data on them may still be accessible. Customers have a tough decision to make when a disk drive module (DDM) stops working:
Send it back to the vendor or manufacturer to have it replaced, repaired or investigated, exposing potentialsensitive information.
Keep the broken drive, forfeit any refund or free replacement, and then physically destroy the drive. Thereare dozens of videos on [YouTube.com] on different ways to do this!
The launch previewed the [IBM partnership with LSI and Seagate] to deliver encryption technology for disk drives, known as "Full Drive Encryption" or FDE.Having all data encrypted on all drives, without impacting performance, eliminates having to decide which data gets encryptedand which doesn't. With data safely encrypted, companies can now send in their broken drives for problemdetermination and replacement.Anytime you can apply a consistent solution across everything, without human intervention anddecision making, the less impact it will have. This was the driving motivation in both disk and tape driveencryption.
(Early in my IBM career, some lawyers decided we need to add a standard 'paragraph' to our copyright text in the upper comment section of our software modules, and so we had a team meeting on this. The lawyer that presented to us that perhaps only20 to 35 percent of the modules needed to be updated with this paragraph, and taught us what to look for to decidewhether or not the module needed to be changed. Myteam argued how tedious this was going to be, that this will take time to open up each module, evaluate it, and make the decision. With thousands of modules involved the process could take weeks. The fact that this was going to take us weeks did not seem to concern our lawyer one bit, it was just thecost of doing business.Finally, I asked if it would be legal to just add the standard paragraph to ALL the modules without any analysis whatsoever. The lawyer was stunned. There was no harm adding this paragraph to all the modules, he said, but that would be 3-5x more work and why would I even suggest that. Our team laughed, recognizing immediately that it was the fastest way to get it done. One quick program updated all modules that afternoon.)
To manage these keys, IBM previewed the Tivoli Key Lifecycle Manager (TKLM).This software helps automate the management of encryption keys throughout their lifecycle to help ensure that encrypted data on storage devices cannot be compromised if lost or stolen. It will apply to both disk and tapeencryption, so that one system will manage all of the encryption keys in your data center.
For those who only read the first and last paragraphs of each post, here is my recap:Information Security is intended as an end-to-end capability to protect against both internal and external threats, restricting access only to those who have a "need-to-know" or are "qualified-to-act". Security approacheslike "single sign-on" and encryption that applies to all tapes and all disks in the data center greatly simplify the deployment.
Earlier this year, IBM launched its[New Enterprise Data Center vision]. The average data center was built 10-15 years ago,at a time when the World Wide Web was still in its infancy, some companies were deploying their first storage areanetwork (SAN) and email system, and if you asked anyone what "Google" was, they might tell you it was ["a one followed by a hundred zeros"]!
Full disclosure: Google, the company, justcelebrated its [10th anniversary] yesterday, and IBM has partnered with Google on a varietyof exciting projects. I am employed by IBM, and own stock in both companies.
In just the last five years, we saw a rapid growth in information, fueled by Web 2.0 social media, email, mobile hand-held devices, and the convergenceof digital technologies that blurs the lines between communications, entertainment and business information. This explosion in information is not just "more of the same", but rather a dramatic shift from predominantly databases for online transaction processing to mostly unstructured content. IT departments are no longer just the"back office" recording financial transactions for accountants, but now also take on a more active "front office" role. For a growing number of industries, information technology plays a pivotal role in generating revenue, making smarter business decisions, and providing better customer service.
IBM felt a new IT model was needed to address this changing landscape, so IBM's New Enterprise Data Center vision has these five key strategic initiatives:
Highly virtualized resources
Business-driven Service Management
Green, Efficient, Optimized facilities
In February, IBM announced new products and features to support the first two initiatives, including the highlyvirtualized capability of the IBM z10 EC mainframe, and and related business resiliency features of the [IBM System Storage DS8000 Turbo] disk system.
In May, IBM launched its Service Management strategic initiative at the Pulse 2008 conference. I was there in Orlando, Florida at the Swan and Dolphin resort to present to clients. You can read my three posts:[Day 1; Day 2 Main Tent; Day 2 Breakout sessions].
In June, IBM launched its fourth strategic initiative "Green, Efficient and Optimized Facilities" with [Project BigGreen 2.0], which included the Space-Efficient Volume (SEV) and Space-Efficient FlashCopy (SEFC) capabilitiesof the IBM System Storage SAN Volume Controller (SVC) 4.3 release. Fellow blogger and IBM master inventor Barry Whyte (BarryW) has three posts on his blog about this:[SVC 4.3.0Overview; SEV and SEFCdetail; Virtual Disk Mirroring and More]
Some have speculated that the IBM System Storage team seemed to be on vacation the past two months, with few pressreleases and little or no fanfare about our July and August announcements, and not responding directly to critics and FUD in the blogosphere.It was because we were holding them all for today's launch, taking our cue from a famous perfume commercial:
"If you want to capture someone's attention -- whisper."
My team and I were actually quite busy at the [IBM Tucson Executive Briefing Center]. In between doing our regular job talking to excited prospects and clients,we trained sales reps and IBM Business Partners, wrote certification exams, and updated marketing collateral. Fortunately, competitors stopped promotingtheir own products to discuss and demonstrate why they are so scared of what IBM is planning.The fear was well justified. Even a few journalists helped raise the word-of-mouth buzz and excitement level. A big kiss to Beth Pariseau for her article in [SearchStorage.com]!
(Last week we broke radio silence to promote our technology demonstration of 1 million IOPS using Solid StateDisk, just to get the huge IBM marketing machine oiled up and ready for today)
Today, IBM General Manager Andy Monshaw launchedthe fifth strategic initiative, [IBM Information Infrastructure], at the[IBM Storage and Storage Networking Symposium] in Montpellier, France. Montpellier is one of the six locations of our New Enterprise Data Center Leadership Centers launched today. The other five are Poughkeepsie, Gaithersburg, Dallas, Mainz and Boebligen, with more planned for 2009.
Although IBM has been using the term "information infrastructure" for more than 30 years, it might be helpful to define it for you readers:
“An information infrastructure comprises the storage, networks, software, and servers integrated and optimized to securely deliver information to the business.”
In other words, it's all the "stuff" that delivers information from the magnetic surface recording of the disk ortape media to the eyes and ears of the end user. Everybody has an information infrastructure already, some are just more effective than others. For those of you not happy with yours, IBM hasthe products, services and expertise to help with your data center transformation.
IBM wants to help its clients deliver the right information to theright people at the right time, to get the most benefits of information, while controlling costs and mitigatingrisks. There might be more than a dozen ways to address the challenges involved, but IBM's Information Infrastructure strategic initiative focuses on four key solution areas:
Last, but not least, I would like to welcome to the blogosphere IBM's newest blogger, Moshe Yanai, formerly the father of the EMC Symmetrix and now leading the IBM XIV team. Already from his first poston his new [ThinkStorage blog], I can tell he is not going to pullany punches either.
"IBM announced that Northwest Radiology Network has gone live with a new virtualized enterprise of IBM servers and storage to support its growing medical imaging needs, giving its four locations an enterprise-class infrastructure which enables its doctors to recover medical image reports faster for analysis and enables remote 24x7 access to its medical image report system.
Founded in 1967, Northwest Radiology (NWR) is ranked as one of the largest physician groups in the Indianapolis, Indiana area. With 180 employees who offer the Central Indiana community comprehensive inpatient and outpatient imaging services such as mammography, ultrasonography, CT scans, PET-CT scans, bone density scans and MRIs – the Network had a dramatic need to develop a centralized infrastructure where large amounts of data could be stored and shared. A new data center would benefit the company’s clientele; which includes area hospitals and doctor’s offices serving thousands of patients each year.
Storing more than ten thousand medical imaging reports and radiographic images each month for doctors to analyze, the Network realized it had single points of failure and at one point a critical report server failed. Northwest Radiology turned to IBM and IBM Business Partner Software Information Systems (SIS) for a more efficient solution to prevent any possible downtime in the future.
SIS recommended and installed a virtualized infrastructure with IBM servers and storage as the heart of Northwest Radiology’s Indianapolis data center. By April 2007, Northwest Radiology replaced eight servers and direct attached storage with just two IBM System x3650 servers connected to an IBM System Storage DS3400. Today, the new servers run 15 virtual servers to ensure the availability of their services 24x7. When the business needs it, a new server can be provisioned in just minutes. With a Fibre Channel on the SAN Disk, the DS3400 not only increased performance but also met NWR’s requirement to not have one single point of failure. With three TB of storage capacity, they can meet the demands of increased business well into the future. The systems are also now easily managed from a remote site."
“Uptime is paramount in our business. We selected IBM based on the reliability and flexibility of IBM System x servers and the IBM System Storage DS3400,” said Marty Buening, IT Director, Northwest Radiology Network. “The virtualized infrastructure and the SAN storage array that SIS and IBM brought to the table is improving our service and giving our doctors and staff piece of mind knowing each patient’s medical imaging reports are always available.”
Second, we have [Iowa Health System], a large enterprise with over 19,000 employees, managing four million patients and hundreds of TBs of data.
Here is a 4-minute video on IBM TV from the good folks at Iowa Health System discussing theIBM Grid Medical Archive Solution (GMAS) as part of their information infrastructure for theirPicture Archiving and Communication Systems (PACS) application.
In both cases, IBM technology was able to provide remote access to medical information, making images and patient records available to more doctors, specialists and radiologists. Last January, in my post[Five in Five], IBM had predicted that remote access to healthcare would have an impact over the next five years.
Whether you are a small company or a large one, IBM probably has the right solution for you.
Continuing this week's theme on products that were part of last week'sIBM Information Infrastructure launch, today I'll cover the TS2900.
IBM System Storage TS2900 Tape Autoloader
This little baby is SWEET! At 1U high, it holds a single drive and up to 9 cartridges,up to a total of 14.4 TB at 2:1 compression. Thedrive can be a Half-Height (HH) LTO-3 or LTO-4 drive. (It is called an autoloader because there isonly a single drive. Automation with multiple drives are called libraries).
This can be rack-mounted, or sit on your desktop. There is an I/O station for insertingor removing individual cartridges, as well as a removable tape magazine to populate orremove the tapes in a more efficient manner.
Both LTO3 and LTO4 support a mix of regular and "Write Once, Read Many" (WORM) media tohelp comply with regulations demanding "Non-erasable, Non-rewriteable" storage. TheLTO4 can also support on-drive encryption, managed by the IBM Encryption Key Manager (EKM).
To learn more, see the IBM System Storage[TS2900 page].
Well, this has been an interesting two weeks. On week 1, I focused on IBM's strategy and four keysolutions areas: Information Availability, Information Security, Information Retention, and InformationCompliance. On week 2, I focused on individual products, their attributes, features and functions.Which week drew more blog traffic? You guessed it--week 1. Apparently, people want to know more aboutsolutions to their challenges and problems, and not just see what piece part components are available.
While IBM had switched over to solution-selling a while ago, some of our competitors are still inproduct-selling mode, and try to frame all competitive comparisons on a product-by-product basis.In my post[Supermarkets and Specialty Shops], I drew the analogy that the IT supermarkets (IBM, HP, Sun and Dell) are focusedon selling solutions, but the IT specialty shops (HDS, EMC, and others) are still focused on products.
Certainly, the transition from product-focused to solution-focused is not an easy one. As the IT industry matures, more and more clients are looking to buy solutions from theirvendors. What does it take to change behaviour of newly acquired employees, recently hired sales reps, and business partners, many of whom come from product-centric cultures, to match this dramatic shift in the marketplace? Let's take a look at change in other areas of the world.
On the[Freakonomics blog], Stephen Dubner discusses how clever people in Israel have figured out a way to get people to clean up after their pets in public places. This is a problem in many countries. Here we see an old idea, the [carrot-and-stick] approach, combined with newinformation technology. Here's an excerpt:
"In order to keep a city’s streets clean of dog poop, require dog owners to submit DNA samples from their pets when they get licenses; then use that DNA database to trace any left-behind poop and send the dogs’ owners stiff fines.
Well, it took three years but the Israeli city of Petah Tikva has actually put this plan to work:
The city will use the DNA database it is building to match feces to a registered dog and identify its owner.
Owners who scoop up their dogs’ droppings and place them in specially marked bins on Petah Tikva’s streets will be eligible for rewards of pet food coupons and dog toys.
But droppings found underfoot in the street and matched through the DNA database to a registered pet could earn its owner a municipal fine."
Sometimes, if enough people change, then changing behaviours of the few remaining becomes much easier. DanLockton on his Architectures of Control blog posts about the[London Design Festival - Greengaged]. This year, the festival focused on behavior changes for a greener environment, ecodesign and sustainable issues in design.Here's an excerpt and corresponding 5-minute YouTube video:
Lea argued three important points relevant to behaviour change:
Behaviour change requires behaviour (i.e. the behaviour of others: social effects are critical, as we respond to others’ behaviour which in turn affects our own; targeting the ‘right’ people allows behaviour to spread)
Behaviour and motivation are two different things: To change behaviour, you need to understand and work with people’s motivations - which may be very different for different people.
Desire is not enough: lots of people desire to behave differently, but it needs to be very easy for them to do it before it actually happens."
Of course, tax and government regulations can heavily influence behaviour and decisions. Since today is[International Talk Like a Pirate Day], I thought I would finish this post off with this interesting piece on Google barges. Some companies, like IBM and Google, seem more adaptable to changing behaviour and trying out fresh new ideas.Will Runyon over on the Raised Floor blog, has a post about Google's patent for[Data center barges on the sea]:"The idea is to use waves to power the data centers, ocean water to cool them, and a moored distance of seven miles or more to avoid paying taxes."
Arrr! Now that's what I call a new way of looking at things!
This post will focus on Information Compliance, the fourth and final part of the four-part series this week.I have received a few queries on my choice of sequence for this series: Availability, Security, Retention andCompliance.
Why not have them in alphabetical order? IBM avoids alphabetizing in one language, because thenit may not be alphabetized when translated to other languages.
Why not have them in a sequence that spells outan easy to remember mnemonic, like "CARS"? Again, when translated to other languages, those mnemonics no longerwork.
Instead, I worked with our marketing team for a more appropriate sequence, based on psychology and the cognitive bias of [primacy and recency effects].
Here's another short 2-minute video, on Information Compliance
Full disclosure: I am not a lawyer. The following will delveinto areas related to government and industry regulations. Consultyour risk officer or legal counsel to make sure any IT solution is appropriatefor your country, your industry, or your specific situation.
IBM estimates there are over 20,000 regulations worldwide related to information storage and transmission.
For information availability, some industry regulations mandate a secondary copy a minimum distance away toprotect against regional disasters like hurricanes or tsunamis.IBM offers Metro Mirror (up to 300km) and Global Mirror (unlimited distance) disk mirroring to support theserequirements.
For information security, some regulations relate to privacy and prevention of unauthorized access. Twoprominent ones in the United States are:
Health Insurance Portability and Accountability Act (HIPAA) of 1996
HIPAA regulates health care providers, health plans, and health care clearinghouses in how they handle the privacy of patient's medical records. These regulations apply whether the information is on film, paper, or storedelectronically. Obviously, electronic medical records are easier to keep private. Here is an excerpt froman article from [WebMD]:
"There are very good ways to protect data electronically. Although it sounds scary, it makes data more protected than current paper records. For example, think about someone looking at your medical chart in the hospital. It has a record of all that is happening -- lab results, doctor consultations, nursing notes, orders, prescriptions, etc. Anybody who opens it for whatever reason can see all of this information. But if the chart is an electronic record, it's easy to limit access to any of that. So a physical therapist writing physical therapy notes can only see information related to physical therapy. There is an opportunity with electronic records to limit information to those who really need to see it. It could in many ways allow more privacy than current paper records."
GLBA regulates the handling of sensitive customer information by banks, securities firms, insurance companies, and other financial service providers. Financial companies use tape encryption to comply with GLBA when sending tapes from one firm to another. IBM was the first to deliver tape drive encryption withthe TS1120, and then later with LTO-4 and TS1130 tape drives.
For information retention, there are a lot of regulations that deal with how information is stored, in some casesimmutable to protect against unethical tampering, and when it can be discarded. Two prominent regulations inthe United States are:
U.S. Securities and Exchange Commission (SEC) 17a-4 of 1997
In the past, the IT industryused the acronym "WORM" which stands for the "Write Once, Read Many" nature of certain media, like CDs, DVDs,optical and tape cartridges. Unfortunately, WORM does not apply to disk-based solutions, so IBM adopted the languagefrom SEC 17a-4 that calls for storage that is "Non-Erasable, Non-Rewriteable" or NENR. This new umbrella term applies to disk-based solutions, as well as tape and optical WORM media.
SEC 17a-4 indicates that broker/dealers and exchange members must preserve all electronic communications relating to the business of their firmm a specific period of time. During this time, the information must not be erased or re-written.
Sarbanes-Oxley (SOX) Act of 2002
SOX was born in the wake of [Enron and other corporate scandals]. It protects the way that financial information is stored, maintained and presented to investors, as well as disciplines those who break its rules. It applies onlyto public companies, i.e. those that offer their securities (stock shares, bonds, liabilities) to be sold to the publicthrough a listing on a U.S. exchange, such as NASDAQ or NYSE.
SOX focuses on preventing CEOs and other executives from tampering the financial records.To meet compliance, companies are turning to the [IBM System Storage DR550] which providesNon-erasable, Non-rewriteable (NENR) storage for financial records. Unlike competitive products like EMC Centera thatfunction mostly as space-heaters on the data center floor once they filled up, the DR550 can be configured as a blended disk-and-tape storage system, so that the most recent, and most likely to be accessed data, remains on disk, but the older, least likely to be accessed data, is moved automatically to less expensive, more environment-friendly "green" tape media.
Did SOX hurt the United States' competitiveness? Critics feared that these new regulations would discourage newcompanies from going public. Earnst & Young found these fears did not come true, and published a study [U.S. Record IPO Activity from 2006 Continues in 2007]. In fact, the improved confidence that SOX has given investors has given rise to similarlegislation in other parts of the world: Euro-Sox for the European Union Investor Protection Act, and J-SOX Financial Instruments and Exchange Law for Japan.
For those who only read the first and last paragraphs of each post, here is my recap:Information Compliance is ensuring that information is protected against regional disasters, unauthorizedaccess, and unethical tampering, as required to meet industry and government regulations. Such regulationsoften apply if the information is stored on traditional paper or film media, but can often be handled more cost-effectively when stored electronically. Appropriate IT governance can help maintain investor confidence.
Wrapping up my week on successful uses of information, I thought I would discuss the visualization of data.Not just bar charts and pie charts, but how effective visual information can be on multi-variable plots.
IBM's [Many Eyes] recognizes that 70 percentof our sensory input neurons in our brain our focused on visual inputs, and so we might recognize patternsif only data was presented in more interesting and visual representations.
In addition to X/Y axis, variables can be presented by size of circle and color. Here's an example plot of the past US bailouts, with variables representing amount, year, company andindustry. This plot does not include the current 700 Billion US Dollar bailout currently under discussion.
This is part of IBM's Collaborative User Experience (CUE) research lab. The software is available Web2.0style at no charge, just upload your data set, and choose one of 16 different presentation styles.
These plots get even more interesting when you animate them over time. In 2006, Hans Rosling presenteddata he gathered from the United Nations and other publicly funded sources and presented his findings atthe TED conference. Here is the 20-minute video of that presentation (click on play at right), titled ["Debunking third-world myths with the best stats you've ever seen"], in which he debunks the myth that all countries fall into two distinct categories: Industrialized and Developing.
Amazingly, the data--as well as the software to analyze it--is available at[GapMinder.org] Web site.
For more information on how you can deploy an information infrastructure that allows you to search, visualize and leverage the most value from your information, contact your local IBM representative or IBM Business Partner.
In yesterday's post, [IBM Information Infrastructure launches today], I explained how this strategic initiative fit into IBM's New EnterpriseData Center vision. For those who prefer audio podcasts, here is Marissa Benekos interviewing Andy Monshaw, IBM General Manager of IBM System Storage.
This post will focus on Information Availability, the first of the four-part series this week.
Here's another short 2-minute video, on Information Availability
I am not in marketing department anymore, so have no idea how much IBM spentto get these videos made, but hate for the money to go wasted. I suspect theonly way they will get viewed is if I include them in my blog. I hope youlike them.
As with many IT terms, "availability" might conjure up different meanings for different people.
Some can focus on the pure mechanics of delivering information. An information infrastructure involves all of thesoftware, servers, networks and storage to bring information to the application or end user, so all of the chainsin the link must be highly available: software should not crash, servers should have "five nines" (99.999%) uptime, networks should be redundant, and storage should handle the I/O request with sufficient performance. For tape libraries, the tape cartridge must be available, robotics are needed to fetch the tape, and a drive must be available toread the cartridge. All of these factors represent the continuous operations and high availability features of business continuity.
In addition to the IT equipment, you need to make sure your facilities that support that equipment, such aspower and cooling, are also available.Independent IT analyst Mark Peters from Enterprise Strategy Group (ESG) summarizes his shock about the findings in a recent [survey commissioned by Emerson Network Power]on his post [Backing Up Your Back Up]. Here is an excerpt:
"The net take-away is that the majority of SMBs in the US do not have back-up power systems. As regional power supplies get more stretched in many areas, the possibility of power outages increases and obviously many SMBs would be vulnerable. Indeed, while the small business decision makers questioned for the survey ranked such power outages ahead of other threats (fires, government regulation, weather, theft and employee turnover) only 39% had a back-up power system. Yeah, you could say, but anything actually going wrong is unlikely; but apparently not, as 79% of those surveyed had experienced at least one power outage during 2007. Yeah, you might say, but maybe the effects were minor; again, apparently not, since 42% of those who'd had outages had to actually close their businesses during the longest outages. The DoE says power outages cost $80 billion a year and businesses bear 98% of those costs."
Others might be more concerned about outages resulting from planned and unplanned downtime. Storage virtualizationcan help reduce planned downtime, by allowing data to be migrated from one storage device to another withoutdisrupting the application's ability to read and write data. The latest "Virtual Disk Mirroring" (VDM) feature of the IBM System Storage SAN Volume Controller takes it one stepfurther, providing high-availability even for entry-level and midrange disk systems managed by the SVC.For unplanned downtime, IBM offers a complete range of support, from highly available clusters, two-site and three-site disaster recovery support, and application-aware data protection through IBM Tivoli Storage Manager.
Many outages are caused by human error, and in many cases it is the human factor that prevent quick resolution.Storage admins are unable to isolate the failing component, identify the configuration or provide the appropriateproblem determination data to the technical team ready to offer support and assistance. For this, IBM TotalStorageProductivity Center software, and its hardware-version the IBM System Storage Productivity Center, can helpreduce outage time and increase information availability. It can also provide automation to predict or provideearly warning of impending conditions that could get worse if not taken care of.
But perhaps yet another take on information availability is the ability to find and communicate the right informnationto the right people at the right time. Recently, Google announced a historic milestone, their search engine nowindexes over [One trillion Web pages]!Google and other search engines have changed the level of expectations for finding information. People ask whythey can find information on the internet so quickly, yet it takes weeks for companies to respond to a judge foran e-discovery request.
Lastly, the team at IBM's[Eightbar blog] pointedme to Mozilla Lab's Ubiquity project for their popular FireFox browser. This project aims to help people communicate the information in a more natural way, rather than unfriently URL links on an email. It is still beta, of course, but helps show what "information availability" might be possible in the near future.Here is a 7-minute demonstration:
For those who only read the first and last paragraphs of each post, here is my recap:Information Availability includes Business Continuity and Data Protection to facilitatequick recovery, storage virtualization to maximize performance and minimize planned downtime, infrastructure management and automation to reduce human error, and the ability to find and communicate information to others.
Before acquisition, Diligent offered only software. The task of putting this software on an appropriate x86 server with sufficientmemory and processor capability was left as an exercise for the storage admin. With the TS7650G, IBM installs theProtectTIER software on the fastest servers in the industry, the IBM System x3850 M2 and x3950 M2. This eliminateshaving the storage admins pretend that they have hardware engineering degrees.
Before acquisition, the software worked only on a single system. IBM was able to offer multiple configurations of the TS7650G, including a single-controller model as well as a clustered dual-controller model. The clustered dual-controller model can ingest data at an impressive 900 MB/sec, which is up to nine times faster than some of thecompetitive deduplication offerings.
Before acquisition, ProtecTIER emulated DLT tape technology. This limited its viability, as the market sharefor DLT has dropped dramatically, and continues to dwindle. Most of the major backup software support DLT as anoption, but going forward this may not be true much longer for new tape applications.IBM was able to extend support by adding LTO emulation on theTS7650G gateway, future-proofing this into the 21st Century.
At last week's launch, covering so many products with so few slides, this announcement was shrunken down to a single line "Store 25 TB of backups onto 1 TB of disk, in 8 hours" and perhaps a few people missed that this wasactually covering two key features.
With deduplication, the TS7650G might get up to 25 times reduction on disk. If you back up a 1 TB data basethat changes only slightly from one day to the next, once a day for 25 days, it might only take 1 TB, or so, of disk tohold all the unique versions, as most of the blocks would be identical, rather than 25 TB on traditional disk or tapestorage systems. The TS7650G can manage up to 1 PB of disk,which could represent in theory up to 25 PB of backup data.
With an ingest rate of 900 MB/sec, the TS7650G could ingest 25 TB of backups during a typical 8 hour backup window.
The 25 TB of the first may not necessarily be the 25 TB of the second, but the wording was convenient for marketingpurposes, and a comma was used to ensure no misunderstandings.Of course, depending on the type of application, the frequency of daily change, and the backup software employed, your mileage may vary.
No post today. I will be joining the majority of IBMers in Tucson for "Days of Caring" held annually bythe [United Way of Tucson and Southern Arizona].IBM has been doing this for years, and we are joined by volunteers from other local businesses, including HealthNet, Wells Fargo bank, Texas Instruments, KVOA local NBC affiliate, 94.9 MixFM radio, and others.
The "days" involve a kick-off last week (Sep 19) and two days of helping local charities (Sep 24 and 27).We are split into teams and are assigned out to help fix up old buildings, clean out gutters, re-paintwalls. My team will be sorting canned goods at the local[Community Food Bank], and assembling boxes of items to begiven out to needy families.