Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Tony Pearson is a Master Inventor and Senior Software Engineer for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
For the longest time, people thought that humans could not run a mile in less than four minutes. Then, in 1954, [Sir Roger Bannister] beat that perception, and shortly thereafter, once he showed it was possible, many other runners were able to achieve this also. The same is being said now about the IBM Watson computer which appeared this week against two human contestants on Jeopardy!
(2014 Update: A lot has happened since I originally wrote this blog post! I intended this as a fun project for college students to work on during their summer break. However, IBM is concerned that some businesses might be led to believe they could simply stand up their own systems based entirely on open source and internally developed code for business use. IBM recommends instead the [IBM InfoSphere BigInsights] which packages much of the software described below. IBM has also launched a new "Watson Group" that has [Watson-as-a-Service] capabilities in the Cloud. To raise awareness to these developments, IBM has asked me to rename this post from IBM Watson - How to build your own "Watson Jr." in your basement to the new title IBM Watson -- How to replicate Watson hardware and systems design for your own use in your basement. I also took this opportunity to improve the formatting layout.)
Often, when a company demonstrates new techology, these are prototypes not yet ready for commercial deployment until several years later. IBM Watson, however, was made mostly from commercially available hardware, software and information resources. As several have noted, the 1TB of data used to search for answers could fit on a single USB drive that you buy at your local computer store.
Take a look at the [IBM Research Team] to determine how the project was organized. Let's decide what we need, and what we don't in our version for personal use:
Do we need it for personal use?
Yes, That's you. Assuming this is a one-person project, you will act as Team Lead.
Yes, I hope you know computer programming!
No, since this version for personal use won't be appearing on Jeopardy, we won't need strategy on wager amounts for the Daily Double, or what clues to pick next. Let's focus merely on a computer that can accept a question in text, and provide an answer back, in text.
Yes, this team focused on how to wire all the hardware together. We need to do that, although this version for personal use will have fewer components.
Optional. For now, let's have this version for personal use just return its answer in plain text. Consider this Extra Credit after you get the rest of the system working. Consider using [eSpeak], [FreeTTS], or the Modular Architecture for Research on speech sYnthesis [MARY] Text-to-Speech synthesizers.
Yes, I will explain what this is, and why you need it.
Yes, we will need to get information for personal use to process
Yes, this team developed a system for parsing the question being asked, and to attach meaning to the different words involved.
No, this team focused on making IBM Watson optimized to answer in 3 seconds or less. We can accept a slower response, so we can skip this.
(Disclaimer: As with any Do-It-Yourself (DIY) project, I am not responsible if you are not happy with your version for personal use I am basing the approach on what I read from publicly available sources, and my work in Linux, supercomputers, XIV, and SONAS. For our purposes, this version for personal use is based entirely on commodity hardware, open source software, and publicly available sources of information. Your implementation will certainly not be as fast or as clever as the IBM Watson you saw on television.)
Step 1: Buy the Hardware
Supercomputers are built as a cluster of identical compute servers lashed together by a network. You will be installing Linux on them, so if you can avoid paying extra for Microsoft Windows, that would save you some money. Here is your shopping list:
Three x86 hosts, with the following:
64-bit quad-core processor, either Intel-VT or AMD-V capable,
8GB of DRAM, or larger
300GB of hard disk, or larger
CD or DVD Read/Write drive
Computer Monitor, mouse and keyboard
Ethernet 1GbE 4-port hub, and appropriate RJ45 cables
Surge protector and Power strip
Local Console Monitor (LCM) 4-port switch (formerly known as a KVM switch) and appropriate cables. This is optional, but will make it easier during the development. Once your implementation is operational, you will only need the monitor and keyboard attached to one machine. The other two machines can remain "headless" servers.
Step 2: Establish Networking
IBM Watson used Juniper switches running at 10Gbps Ethernet (10GbE) speeds, but was not connected to the Internet while playing Jeopardy! Instead, these Ethernet links were for the POWER7 servers to talk to each other, and to access files over the Network File System (NFS) protocol to the internal customized SONAS storage I/O nodes.
The implementation will be able to run "disconnected from the Internet" as well. However, you will need Internet access to download the code and information sources. For our purposes, 1GbE should be sufficient. Connect your Ethernet hub to your DSL or Cable modem. Connect all three hosts to the Ethernet switch. Connect your keyboard, video monitor and mouse to the LCM, and connect the LCM to the three hosts.
Step 3: Install Linux and Middleware
To say I use Linux on a daily basis is an understatement. Linux runs on my Android-based cell phone, my laptop at work, my personal computers at home, most of our IBM storage devices from SAN Volume Controller to XIV to SONAS, and even on my Tivo at home which recorded my televised episodes of Jeopardy!
For this project, you can use any modern Linux distribution that supports KVM. IBM Watson used Novel SUSE Linux Enterprise Server [SLES 11]. Alternatively, I can also recommend either Red Hat Enterprise Linux [RHEL 6] or Canonical [Ubuntu v10]. Each distribution of Linux comes in different orientations. Download the the 64-bit "ISO" files for each version, and burn them to CDs.
Graphical User Interface (GUI) oriented, often referred to as "Desktop" or "HPC-Head"
Command Line Interface (CLI) oriented, often referred to as "Server" or "HPC-Compute"
Guest OS oriented, to run in a Hypervisor such as KVM, Xen, or VMware. Novell calls theirs "Just Enough Operating System" [JeOS].
For this version for personal use, I have chosen a [multitier architecture], sometimes referred to as an "n-tier" or "client/server" architecture.
Host 1 - Presentation Server
For the Human-Computer Interface [HCI], the IBM Watson received categories and clues as text files via TCP/IP, had a [beautiful avatar] representing a planet with 42 circles streaking across in orbit, and text-to-speech synthesizer to respond in a computerized voice. Your implementation will not be this sophisticated. Instead, we will have a simple text-based Query Panel web interface accessible from a browser like Mozilla Firefox.
Host 1 will be your Presentation Server, the connection to your keyboard, video monitor and mouse. Install the "Desktop" or "HPC Head Node" version of Linux. Install [Apache Web Server and Tomcat] to run the Query Panel. Host 1 will also be your "programming" host. Install the [Java SDK] and the [Eclipse IDE for Java Developers]. If you always wanted to learn Java, now is your chance. There are plenty of books on Java if that is not the language you normally write code.
While three little systems doesn't constitute an "Extreme Cloud" environment, you might like to try out the "Extreme Cloud Administration Tool", called [xCat], which was used to manage the many servers in IBM Watson.
Host 2 - Business Logic Server
Host 2 will be driving most of the "thinking". Install the "Server" or "HPC Compute Node" version of Linux. This will be running a server virtualization Hypervisor. I recommend KVM, but you can probably run Xen or VMware instead if you like.
Host 3 - File and Database Server
Host 3 will hold your information sources, indices, and databases. Install the "Server" or "HPC Compute Node" version of Linux. This will be your NFS server, which might come up as a question during the installation process.
Technically, you could run different Linux distributions on different machines. For example, you could run "Ubuntu Desktop" for host 1, "RHEL 6 Server" for host 2, and "SLES 11" for host 3. In general, Red Hat tries to be the best "Server" platform, and Novell tries to make SLES be the best "Guest OS".
My advice is to pick a single distribution and use it for everything, Desktop, Server, and Guest OS. If you are new to Linux, choose Ubuntu. There are plenty of books on Linux in general, and Ubuntu in particular, and Ubuntu has a helpful community of volunteers to answer your questions.
Step 4: Download Information Sources
You will need some documents for your implementation to process.
IBM Watson used a modified SONAS to provide a highly-available clustered NFS server. For this version, we won't need that level of sophistication. Configure Host 3 as the NFS server, and Hosts 1 and 2 as NFS clients. See the [Linux-NFS-HOWTO] for details. To optimize performance, host 3 will be the "official master copy", but we will use a Linux utility called rsync to copy the information sources over to the hosts 1 and 2. This allows the task engines on those hosts to access local disk resources during question-answer processing.
We will also need a relational database. You won't need a high-powered IBM DB2. Your implementation can do fine with something like [Apache Derby] which is the open source version of IBM CloudScape from its Informix acquisition. Set up Host 3 as the Derby Network Server, and Hosts 1 and 2 as Derby Network Clients. For more about structured content in relational databases, see my post [IBM Watson - Business Intelligence, Data Retrieval and Text Mining].
Linux includes a utility called wget which allows you to download content from the Internet to your system. What documents you decide to download is up to you, based on what types of questions you want answered. For example, if you like Literature, check out the vast resources at [FullBooks.com]. You can automate the download by writing a shell script or program to invoke wget to all the places you want to fetch data from. Rename the downloaded files to something unique, as often they are just "index.html". For more on wget utility, see [IBM Developerworks].
Step 5: The Query Panel - Parsing the Question
Next, we need to parse the question and have some sense of what is being asked for. For this we will use [OpenNLP] for Natural Language Processing, and [OpenCyc] for the conceptual logic reasoning. See Doug Lenat presenting this 75-minute video [Computers versus Common Sense]. To learn more, see the [CYC 101 Tutorial].
Unlike Jeopardy! where Alex Trebek provides the answer and contestants must respond with the correct question, we will do normal Question-and-Answer processing. To keep things simple, we will limit questions to the following formats:
Who is ...?
Where is ...?
When did ... happen?
What is ...?
Host 1 will have a simple Query Panel web interface. At the top, a place to enter your question, and a "submit" button, and a place at the bottom for the answer to be shown. When "submit" is pressed, this will pass the question to "main.jsp", the Java servlet program that will start the Question-answering analysis. Limiting the types of questions that can be posed will simplify hypothesis generation, reduce the candidate set and evidence evaluation, allowing the analytics processing to continue in reasonable time.
Step 6: Unstructured Information Management Architecture
The "heart and soul" of IBM Watson is Unstructured Information Management Architecture [UIMA]. IBM developed this, then made it available to the world as open source. It is maintained by the [Apache Software Foundation], and overseen by the Organization for the Advancement of Structured Information Standards [OASIS].
Basically, UIMA lets you scan unstructured documents, gleam the important points, and put that into a database for later retrieval. In the graph above, DBs means 'databases' and KBs means 'knowledge bases'. See the 4-minute YouTube video of [IBM Content Analytics], the commercial version of UIMA.
Starting from the left, the Collection Reader selects each document to process, and creates an empty Common Analysis Structure (CAS) which serves as a standardized container for information. This CAS is passed to Analysis Engines , composed of one or more Annotators which analyze the text and fill the CAS with the information found. The CAS are passed to CAS Consumers which do something with the information found, such as enter an entry into a database, update an index, or update a vote count.
(Note: This point requires, what we in the industry call a small matter of programming, or [SMOP]. If you've always wanted to learn Java programming, XML, and JDBC, you will get to do plenty here. )
If you are not familiar with UIMA, consider this [UIMA Tutorial].
Step 7: Parallel Processing
People have asked me why IBM Watson is so big. Did we really need 2,880 cores of processing power? As a supercomputer, the 80 TeraFLOPs of IBM Watson would place it only in 94th place on the [Top 500 Supercomputers]. While IBM Watson may be the [Smartest Machine on Earth], the most powerful supercomputer at this time is the Tianhe-1A with more than 186,000 cores, capable of 2,566 TeraFLOPs.
To determine how big IBM Watson needed to be, the IBM Research team ran the DeepQA algorithm on a single core. It took 2 hours to answer a single Jeopardy question! Let's look at the performance data:
Number of cores
Time to answer one Jeopardy question
Single IBM Power750 server
< 4 minutes
Single rack (10 servers)
< 30 seconds
IBM Watson (90 servers)
< 3 seconds
The old adage applies, [many hands make for light work]. The idea is to divide-and-conquer. For example, if you wanted to find a particular street address in the Manhattan phone book, you could dispatch fifty pages to each friend and they could all scan those pages at the same time. This is known as "Parallel Processing" and is how supercomputers are able to work so well. However, not all algorithms lend well to parallel processing, and the phrase [nine women can't have a baby in one month] is often used to remind us of this.
Fortuantely, UIMA is designed for parallel processing. You need to install UIMA-AS for Asynchronous Scale-out processing, an add-on to the base UIMA Java framework, supporting a very flexible scale-out capability based on JMS (Java Messaging Services) and ActiveMQ. We will also need Apache Hadoop, an open source implementation used by Yahoo Search engine. Hadoop has a "MapReduce" engine that allows you to divide the work, dispatch pieces to different "task engines", and the combine the results afterwards.
Host 2 will run Hadoop and drive the MapReduce process. Plan to have three KVM guests on Host 1, four on Host 2, and three on Host 3. That means you have 10 task engines to work with. These task engines can be deployed for Content Readers, Analysis Engines, and CAS Consumers. When all processing is done, the resulting votes will be tabulated and the top answer displayed on the Query Panel on Host 1.
Step 8: Testing
To simplify testing, use a batch processing approach. Rather than entering questions by hand in the Query Panel, generate a long list of questions in a file, and submit for processing. This will allow you to fine-tune the environment, optimize for performance, and validate the answers returned.
There you have it. By the time you get your implementation fully operational, you will have learned a lot of useful skills, including Linux administration, Ethernet networking, NFS file system configuration, Java programming, UIMA text mining analysis, and MapReduce parallel processing. Hopefully, you will also gain an appreciation for how difficult it was for the IBM Research team to accomplish what they had for the Grand Challenge on Jeopardy! Not surprisingly, IBM Watson is making IBM [as sexy to work for as Apple, Google or Facebook], all of which started their business in a garage or a basement with a system as small as this version for personal use.
“In times of universal deceit, telling the truth will be a revolutionary act.”
-- George Orwell
Well, it has been over two years since I first covered IBM's acquisition of the XIV company. Amazingly, I still see a lot of misperceptions out in the blogosphere, especially those regarding double drive failures for the XIV storage system. Despite various attempts to [explain XIV resiliency] and to [dispel the rumors], there are still competitors making stuff up, putting fear, uncertainty and doubt into the minds of prospective XIV clients.
Clients love the IBM XIV storage system! In this economy, companies are not stupid. Before buying any enterprise-class disk system, they ask the tough questions, run evaluation tests, and all the other due diligence often referred to as "kicking the tires". Here is what some IBM clients have said about their XIV systems:
“3-5 minutes vs. 8-10 hours rebuild time...”
-- satisfied XIV client
“...we tested an entire module failure - all data is re-distributed in under 6 hours...only 3-5% performance degradation during rebuild...”
-- excited XIV client
“Not only did XIV meet our expectations, it greatly exceeded them...”
In this blog post, I hope to set the record straight. It is not my intent to embarrass anyone in particular, so instead will focus on a fact-based approach.
Fact: IBM has sold THOUSANDS of XIV systems
XIV is "proven" technology with thousands of XIV systems in company data centers. And by systems, I mean full disk systems with 6 to 15 modules in a single rack, twelve drives per module. That equates to hundreds of thousands of disk drives in production TODAY, comparable to the number of disk drives studied by [Google], and [Carnegie Mellon University] that I discussed in my blog post [Fleet Cars and Skin Cells].
Fact: To date, no customer has lost data as a result of a Double Drive Failure on XIV storage system
This has always been true, both when XIV was a stand-alone company and since the IBM acquisition two years ago. When examining the resilience of an array to any single or multiple component failures, it's important to understand the architecture and the design of the system and not assume all systems are alike. At it's core, XIV is a grid-based storage system. IBM XIV does not use traditional RAID-5 or RAID-10 method, but instead data is distributed across loosely connected data modules which act as independent building blocks. XIV divides each LUN into 1MB "chunks", and stores two copies of each chunk on separate drives in separate modules. We call this "RAID-X".
Spreading all the data across many drives is not unique to XIV. Many disk systems, including EMC CLARiiON-based V-Max, HP EVA, and Hitachi Data Systems (HDS) USP-V, allow customers to get XIV-like performance by spreading LUNs across multiple RAID ranks. This is known in the industry as "wide-striping". Some vendors use the terms "metavolumes" or "extent pools" to refer to their implementations of wide-striping. Clients have coined their own phrases, such as "stripes across stripes", "plaid stripes", or "RAID 500". It is highly unlikely that an XIV will experience a double drive failure that ultimately requires recovery of files or LUNs, and is substantially less vulnerable to data loss than an EVA, USP-V or V-Max configured in RAID-5. Fellow blogger Keith Stevenson (IBM) compared XIV's RAID-X design to other forms of RAID in his post [RAID in the 21st Centure].
Fact: IBM XIV is designed to minimize the likelihood and impact of a double drive failure
The independent failure of two drives is a rare occurrence. More data has been lost from hash collisions on EMC Centera than from double drive failures on XIV, and hash collisions are also very rare. While the published worst-case time to re-protect from a 1TB drive failure for a fully-configured XIV is 30 minutes, field experience shows XIV regaining full redundancy on average in 12 minutes. That is 40 times less likely than a typical 8-10 hour window for a RAID-5 configuration.
A lot of bad things can happen in those 8-10 hours of traditional RAID rebuild. Performance can be seriously degraded. Other components may be affected, as they share cache, connected to the same backplane or bus, or co-dependent in some other manner. An engineer supporting the customer onsite during a RAID-5 rebuild might pull the wrong drive, thereby causing a double drive failure they were hoping to avoid. Having IBM XIV rebuild in only a few minutes addresses this "human factor".
In his post [XIV drive management], fellow blogger Jim Kelly (IBM) covers a variety of reasons why storage admins feel double drive failures are more than just random chance. XIV avoids load stress normally associated with traditional RAID rebuild by evenly spreading out the workload across all drives. This is known in the industry as "wear-leveling". When the first drive fails, the recovery is spread across the remaining 179 drives, so that each drive only processes about 1 percent of the data. The [Ultrastar A7K1000] 1TB SATA disk drives that IBM uses from HGST have specified 1.2 million hours mean-time-between-failures [MTBF] would average about one drive failing every nine months in a 180-drive XIV system. However, field experience shows that an XIV system will experience, on average, one drive failure per 13 months, comparable to what companies experience with more robust Fibre Channel drives. That's innovative XIV wear-leveling at work!
Fact: In the highly unlikely event that a DDF were to occur, you will have full read/write access to nearly all of your data on the XIV, all but a few GB.
Even though it has NEVER happened in the field, some clients and prospects are curious what a double drive failure on an XIV would look like. First, a critical alert message would be sent to both the client and IBM, and a "union list" is generated, identifying all the chunks in common. The worst case on a 15-module XIV fully loaded with 79TB data is approximately 9000 chunks, or 9GB of data. The remaining 78.991 TB of unaffected data are fully accessible for read or write. Any I/O requests for the chunks in the "union list" will have no response yet, so there is no way for host applications to access outdated information or cause any corruption.
(One blogger compared losing data on the XIV to drilling a hole through the phone book. Mathematically, the drill bit would be only 1/16th of an inch, or 1.60 millimeters for you folks outside the USA. Enough to knock out perhaps one character from a name or phone number on each page. If you have ever seen an actor in the movies look up a phone number in a telephone booth then yank out a page from the phone book, the XIV equivalent would be cutting out 1/8th of a page from an 1100 page phone book. In both cases, all of the rest of the unaffected information is full accessible, and it is easy to identify which information is missing.)
If the second drive failed several minutes after the first drive, the process for full redundancy is already well under way. This means the union list is considerably shorter or completely empty, and substantially fewer chunks are impacted. Contrast this with RAID-5, where being 99 percent complete on the rebuild when the second drive fails is just as catastrophic as having both drives fail simultaneously.
Fact: After a DDF event, the files on these few GB can be identified for recovery.
Once IBM receives notification of a critical event, an IBM engineer immediately connects to the XIV using remote service support method. There is no need to send someone physically onsite, the repair actions can be done remotely. The IBM engineer has tools from HGST to recover, in most cases, all of the data.
Any "union" chunk that the HGST tools are unable to recover will be set to "media error" mode. The IBM engineer can provide the client a list of the XIV LUNs and LBAs that are on the "media error" list. From this list, the client can determine which hosts these LUNs are attached to, and run file scan utility to the file systems that these LUNs represent. Files that get a media error during this scan will be listed as needing recovery. A chunk could contain several small files, or the chunk could be just part of a large file. To minimize time, the scans and recoveries can all be prioritized and performed in parallel across host systems zoned to these LUNs.
As with any file or volume recovery, keep in mind that these might be part of a larger consistency group, and that your recovery procedures should make sense for the applications involved. In any case, you are probably going to be up-and-running in less time with XIV than recovery from a RAID-5 double failure would take, and certainly nowhere near "beyond repair" that other vendors might have you believe.
Fact: This does not mean you can eliminate all Disaster Recovery planning!
To put this in perspective, you are more likely to lose XIV data from an earthquake, hurricane, fire or flood than from a double drive failure. As with any unlikely disaster, it is best to have a disaster recovery plan than to hope it never happens. All disk systems that sit on a single datacenter floor are vulnerable to such disasters.
For mission-critical applications, IBM recommends using disk mirroring capability. IBM XIV storage system offers synchronous and asynchronous mirroring natively, both included at no additional charge.
Have you ever noticed that sometimes two movies come out that seem eerily similar to each other, released by different studios within months or weeks of each other? My sister used to review film scripts for a living, she would read ten of them and have to pick her top three favorites, and tells me that scripts for nearly identical concepts came all the time. Here are a few of my favorite examples:
1994: [Wyatt Earp] and [Tombstone] were Westerns recounting the famed gunfight at the O.K. Corral. Tombstone, Arizona is near Tucson, and the gunfight is recreated fairly often for tourists.
1998: [Armageddon] and [Deep Impact] were a pair of disaster movies dealing with a large rock heading to destroy all life on earth. I was in Mazatlan, Mexico to see the latter, dubbed in Spanish as "Impacto Profundo".
1998: [A Bug's Life] and [Antz] were computer-animated tales of the struggle of one individual ant in an ant colony.
2000: [Mission to Mars] and [Red Planet] were sci-fi pics exploring what a manned mission to our neighboring planet might entail.
This is different than copy-cat movies that are re-made or re-imagined many years later based on the previous successes of an original. Ever since my blog post [VPLEX: EMC's Latest Wheel is Round] in 2010 comparing EMC's copy-cat product that came our seven years after IBM's SAN Volume Controller (SVC), I've noticed EMC doesn't talk about VPLEX that much anymore.
This week, IBM announced [XIV Gen3 Solid-State Drive support] and our friends over at EMC announced [VFCache SSD-based PCIe cards]. Neither of these should be a surprise to anyone who follows the IT industry, as IBM had announced its XIV Gen3 as "SSD-Ready" last year specifically for this purpose, and EMC has been touting its "Project Lightning" since last May.
Fellow blogger Chuck Hollis from EMC has a blog post [VFCache means Very Fast Cache indeed] that provides additional detail. Chuck claims the VFCache is faster than popular [Fusion-IO PCIe cards] available for IBM servers. I haven't seen the performance spec sheets, but typically SSD is four to five times slower than the DRAM cache used in the XIV Gen3. The VFCache's SSD is probably similar in performance to the SSD supported in the IBM XIV Gen3, DS8000, DS5000, SVC, N series, and Storwize V7000 disk systems.
Nonetheless, I've been asked my opinions on the comparison between these two announcements, as they both deal with improving application performance through the use of Solid-State Drives as an added layer of read cache.
(FTC Disclosure: I am both a full-time employee and stockholder of the IBM Corporation. The U.S. Federal Trade Commission may consider this blog post as a paid celebrity endorsement of IBM servers and storage systems. This blog post is based on my interpretation and opinions of publicly-available information, as I have no hands-on access to any of these third-party PCIe cards. I have no financial interest in EMC, Fusion-IO, Texas Memory Systems, or any other third party vendor of PCIe cards designed to fit inside IBM servers, and I have not been paid by anyone to mention their name, brands or products on this blog post.)
The solutions are different in that IBM XIV Gen3 the SSD is "storage-side" in the external storage device, and EMC VFCache is "server-side" as a PCI Express [PCIe] card. Aside from that, both implement SSD as an additional read cache layer in front of spinning disk to boost performance. Neither is an industry first, as IBM has offered server-side SSD since 2007, and IBM and EMC have offered storage-side SSD in many of their other external storage devices. The use of SSD as read cache has already been available in IBM N series using [Performance Accelerator Module (PAM)] cards.
IBM has offered cooperative caching synergy between its servers and its storage arrays for some time now. The predecessor to today's POWER7-based were the iSeries i5 servers that used PCI-X IOP cards with cache to connect i5/OS applications to IBM's external disk and tape systems. To compete in this space, EMC created their own PCI-X cards to attach their own disk systems. In 2006, IBM did the right thing for our clients and fostered competition by entering in a [Landmark agreement] with EMC to [license the i5 interfaces]. Today, VIOS on IBM POWER systems allows a much broader choice of disk options for IBM i clients, including the IBM SVC, Storwize V7000 and XIV storage systems.
Can a little SSD really help performance? Yes! An IBM client running a [DB2 Universal Database] cluster across eight System x servers was able to replace an 800-drive EMC Symmetrix by putting eight SSD Fusion-IO cards in each server, for a total of 64 Solid-State drives, saving money and improving performance. DB2 has the Data Partitioning Feature that has multi-system DB2 configurations using a Grid-like architecture similar to how XIV is designed. Most IBM System x and BladeCenter servers support internal SSD storage options, and many offer PCIe slots for third-party SSD cards. Sadly, you can't do this with a VFCache card, since you can have only one VFCache card in each server, the data is unprotected, and only for ephemeral data like transaction logs or other temporary data. With multiple Fusion-IO cards in an IBM server, you can configure a RAID rank across the SSD, and use it for persistent storage like DB2 databases.
Here then is my side-by-side comparison:
IBM XIV Gen3 SSD Caching
Selected x86-based models of Cisco UCS, Dell PowerEdge, HP ProLiant DL, and IBM xSeries and System x servers
All of these, plus any other blade or rack-optimized server currently supported by XIV Gen3, including Oracle SPARC, HP Titanium, IBM POWER systems, and even IBM System z mainframes running Linux
Operating System support
Linux RHEL 5.6 and 5.7, VMware vSphere 4.1 and 5.0, and Windows 2008 x64 and R2.
All of these, plus all the other operating systems supported by XIV Gen3, including AIX, IBM i, Solaris, HP-UX, and Mac OS X
FCP and iSCSI
Vendor-supplied driver required on the server
Yes, the VFCache driver must be installed to use this feature.
No, IBM XIV Gen3 uses native OS-based multi-pathing drivers.
External disk storage systems required
None, it appears the VFCache has no direct interaction with the back-end disk array, so in theory the benefits are the same whether you use this VFCache card in front of EMC storage or IBM storage
XIV Gen3 is required, as the SSD slots are not available on older models of IBM XIV.
Shared disk support
No, VFCache has to be disabled and removed for vMotion to take place.
Yes! XIV Gen3 SSD caching shared disk supports VMware vMotion and Live Partition Mobility.
Support for multiple servers
An advantage of the XIV Gen3 SSD caching approach is that the cache can be dynamically allocated to the busiest data from any server or servers.
Support for active/active server clusters
Aware of changes made to back-end disk
No, it appears the VFCache has no direct interaction with the back-end disk array, so any changes to the data on the box itself are not communicated back to the VFCache card itself to invalidate the cache contents.
None identified. However, VFCache only caches blocks 64KB or smaller, so any sequential processing with larger blocks will bypass the VFCache.
Yes! XIV algorithms detect sequential access and avoid polluting the SSD with these blocks of data.
Number of SSD supported
One, which seems odd as IBM supports multiple Fusion-IO cards for its servers. However, this is not really a single point of failure (SPOF) as an application experiencing a VFCache failure merely drops down to external disk array speed, no data is lost since it is only read cache.
6 to 15 (one per XIV module) for high availability.
Pin data in SSD cache
Yes, using split-card mode, you can designate a portion of the 300GB to serve as Direct-attached storage (DAS). All data written to the DAS portion will be kept in SSD. However, since only one card is supported per server and the data is unprotected, this should only be used for ephemeral data like logs and temp files.
No, there is no option to designate an XIV Gen3 volume to be SSD-only. Consider using Fusion-IO PCIe card as a DAS alternative, or another IBM storage system for that requirement.
Pre-sales Estimating tools
Yes! CDF and Disk Magic tools are available to help cost-justify the purchase of SSD based on workload performance analysis.
IBM has the advantage that it designs and manufactures both servers and storage, and can design optimal solutions for our clients in that regard.
Well, it's Tuesday again, but this time, today we had our third big storage launch of 2009! A lot got announced today as part of IBM's big "Dynamic Infrastructure" marketing campaign. I will just focus on the
disk-related announcements today:
IBM System Storage DS8700
IBM adds a new model to its DS8000 series with the
[IBM System Storage DS8700]. Earlier this month, fellow blogger and arch-nemesis Barry Burke from EMC posted [R.I.P DS8300] on this mistaken assumption that the new DS8700 meant that DS8300 was going away, or that anyone who bought a DS8300 recently would be out of luck. Obviously, I could not respond until today's announcement, as the last thing I want to do is lose my job disclosing confidential information. BarryB is wrong on both counts:
IBM will continue to sell the DS8100 and DS8300, in addition to the new DS8700.
Clients can upgrade their existing DS8100 or DS8300 systems to DS8700.
BarryB's latest post [What's In a Name - DS8700] is fair game, given all the fun and ridicule everyone had at his expense over EMC's "V-Max" name.
So the DS8700 is new hardware with only 4 percent new software. On the hardware side, it uses faster POWER6 processors instead of POWER5+, has faster PCI-e buses instead of the RIO-G loops, and faster four-port device adapters (DAs) for added bandwidth between cache and drives. The DS8700 can be ordered as a single-frame dual 2-way that supports up to 128 drives and 128GB of cache, or as a dual 4-way, consisting of one primary frame, and up to four expansion frames, with up to 384GB of cache and 1024 drives.
Not mentioned explicitly in the announcements were the things the DS8700 does not support:
ESCON attachment - Now that FICON is well-established for the mainframe market, there is no need to support the slower, bulkier ESCON options. This greatly reduced testing effort. The 2-way DS8700 can support up to 16 four-port FICON/FCP host adapters, and the 4-way can support up to 32 host adapters, for a maximum of 128 ports. The FICON/FCP host adapter ports can auto-negotiate between 4Gbps, 2Gbps and 1Gbps as needed.
LPAR mode - When IBM and HDS introduced LPAR mode back in 2004, it sounded like a great idea the engineers came up with. Most other major vendors followed our lead to offer similar "partitioning". However, it turned out to be what we call in the storage biz a "selling apple" not a "buying apple". In other words, something the salesman can offer as a differentiating feature, but that few clients actually use. It turned out that supporting both LPAR and non-LPAR modes merely doubled the testing effort, so IBM got rid of it for the DS8700.
Update: I have been reminded that both IBM and HDS delivered LPAR mode within a month of each other back in 2004, so it was wrong for me to imply that HDS followed IBM's lead when obviously development happened in both companies for the most part concurrently prior to that. EMC was late to the "partition" party, but who's keeping track?
Initial performance tests show up to 50 percent improvement for random workloads, and up to 150 percent improvement for sequential workloads, and up to 60 percent improvement in background data movement for FlashCopy functions. The results varied slightly between Fixed Block (FB) LUNs and Count-Key-Data (CKD) volumes, and I hope to see some SPC-1 and SPC-2 benchmark numbers published soon.
The DS8700 is compatible for Metro Mirror, Global Mirror, and Metro/Global Mirror with the rest of the DS8000 series, as well as the ESS model 750, ESS model 800 and DS6000 series.
New 600GB FC and FDE drives
IBM now offers [600GB drives] for the DS4700 and DS5020 disk systems, as well as the EXP520 and EXP810 expansion drawers. In each case, we are able to pack up to 16 drives into a 3U enclosure.
Personally, I think the DS5020 should have been given a DS4xxx designation, as it resembles the DS4700
more than the other models of the DS5000 series. Back in 2006-2007, I was the marketing strategist for IBM System Storage product line, and part of my job involved all of the meetings to name or rename products. Mostly I gave reasons why products should NOT be renamed, and why it was important to name the products correctly at the beginning.
IBM System Storage SAN Volume Controller hardware and software
Fellow IBM master inventory Barry Whyte has been covering the latest on the [SVC 2145-CF8 hardware]. IBM put out a press release last week on this, and today is the formal announcement with prices and details. Barry's latest post
[SVC CF8 hardware and SSD in depth] covers just part of the entire
The other part of the announcement was the [SVC 5.1 software] which can be loaded
on earlier SVC models 8F2, 8F4, and 8G4 to gain better performance and functionality.
To avoid confusion on what is hardware machine type/model (2145-CF8 or 2145-8A4) and what is software program (5639-VC5 or 5639-VW2), IBM has introduced two new [Solution Offering Identifiers]:
5465-028 Standard SAN Volume Controller
5465-029 Entry Edition SAN Volume Controller
The latter is designed for smaller deployments, supports only a single SVC node-pair managing up to
150 disk drives, available in Raven Black or Flamingo Pink.
EXN3000 and EXP5060 Expansion Drawers
IBM offers the [EXN3000 for the IBM N series]. These expansion drawers can pack 24 drives in a 4U enclosure. The drives can either be all-SAS, or all-SATA, supporting 300GB, 450GB, 500GB and 1TB size capacity drives.
The [EXP5060 for the IBM DS5000 series] is a high-density expansion drawer that can pack up to 60 drives into a 4U enclosure. A DS5100 or DS5300
can handle up to eight of these expansion drawers, for a total of 480 drives.
Pre-installed with Tivoli Storage Productivity Center Basic Edition. Basic Edition can be upgraded with license keys to support Data, Disk and Standard Edition to extend support and functionality to report and manage XIV, N series, and non-IBM disk systems.
Pre-installed with Tivoli Key Lifecycle Manager (TKLM). This can be used to manage the Full Disk Encryption (FDE) encryption-capable disk drives in the DS8000 and DS5000, as well as LTO and TS1100 series tape drives.
IBM Tivoli Storage FlashCopy Manager v2.1
The [IBM Tivoli Storage FlashCopy Manager V2.1] replaces two products in one. IBM used
to offer IBM Tivoli Storage Manager for Copy Services (TSM for CS) that protected Windows application data, and IBM Tivoli Storage Manager for Advanced Copy Services (TSM for ACS) that protected AIX application data.
The new product has some excellent advantages. FlashCopy Manager offers application-aware backup of LUNs containing SAP, Oracle, DB2, SQL server and Microsoft Exchange data. It can support IBM DS8000, SVC and XIV point-in-time copy functions, as well as the Volume Shadow Copy Services (VSS) interfaces of the IBM DS5000, DS4000 and DS3000 series disk systems. It is priced by the amount of TB you copy, not on the speed or number of CPU processors inside the server.
Don't let the name fool you. IBM FlashCopy Manager does not require that you use Tivoli Storage Manager (TSM) as your backup product. You can run IBM FlashCopy Manager on its own, and it will manage your FlashCopy target versions on disk, and these can be backed up to tape or another disk using any backup product. However, if you are lucky enough to also be using TSM, then there is optional integration that allows TSM to manage the target copies, move them to tape, inventory them in its DB2 database, and provide complete reporting.
Yup, that's a lot to announce in one day. And this was just the disk-related portion of the launch!
A reader from New Zealand expressed concern some corporate bloggers were [using the earthquake for marketing]. He lost someone close to him in Christchurch, and is unable to reach a friend living in Japan, so I am sorry for his loss. I plan to be in Australia and New Zealand to teach a Top Gun class May 15-27, so hopefully I will be able to meet him in person when I am down there.
"Earmarking funds is a really good way of hobbling relief organizations and ensuring that they have to leave large piles of money unspent in one place while facing urgent needs in other places. ... Meanwhile, the smaller and less visible emergencies where NGOs can do the most good are left unfunded.
In the specific case of Japan, there's all the more reason not to donate money. Japan is a wealthy country which is responding to the disaster, among other things, by printing hundreds of billions of dollars' worth of new money."
Another reader mentioned that the last surviving American WW-II vet died the same week. WTF? IBM and Japan have been allies for quite a while now, and there is no reason to bring up past wars except to compare the scope and magnitude of the cleanup effort. (Update: Frank Buckles was the last surviving WW-I vet, but also served in WW-II).
Many readers felt that charity begins at home, and there are plenty of worthy causes right here in the USA to donate to instead. Inspired by last year's movie [Waiting for Superman], my girlfriend started a project called [Centers for My Super Stars] for her first grade class on DonorsChoose.org. For those not familiar with this website, DonorsChoose.org uses the cloud to connect school teachers in need of supplies with rich people to donate funds towards these projects. If you want to contribute to her project, [donate here].
"And speaking of class, there just happens to be a baseball team in Sendai, Japan. The Golden Eagles. Their stadium was severely damaged from the earthquake. Wouldn't you think some of them lug nuts who run American baseball would bring the Golden Eagles and their opponents over to the United States when the Japanese season starts -- play some games over here and raise money to help the Japanese? Wouldn't you think they could just once stop that national pastime stuff and help the international pastime?"
As you can see, different readers have different opinions on this. We are all on this world together, and both our economy and our ecology are more interconnected than you might think. Let's build a smarter planet.
From New York, Rolf went to London, Paris, Madrid, Morocco, Cairo, South Africa, Bangkok Thailand, Malaysia, Singapore, New Zealand, Australia, and then back to United States. I was hoping to run into him while I was in Australia and New Zealand last month, but our schedules did not line up.
Travelingwithout baggage is more than just a convenience, it is a metaphor for the philosophy that we should keep only what we need, and leave behind what we don't. This was the approach taken by IBM in the design of the IBM Storwize V7000 midrange disk system.
The IBM Storwize V7000 disk system consists of 2U enclosures. Controller enclosures have dual-controllers and drives. Expansion enclosures have just drives. Enclosures can have either 24 smaller form factor (SFF) 2.5-inch drives, or twelve larger 3.5-inch drives. A controller enclosure can be connected up to nine expansion enclosures.
The drives are all connected via 6 Gbps SAS, and come in a variety of speeds and sizes: 300GB Solid-State Drive (SSD); 300GB/450GB/600GB high-speed 10K RPM; and 2TB low-speed 7200 RPM drives. The 12-bay enclosures can be intermixed with 24-bay enclosures on the same system, and within an enclosure different speeds and sizes can be intermixed. A half-rack system (20U) could hold as much as 480TB of raw disk capacity.
This new system, freshly designed entirely within IBM, competes directly against systems that carry a lot of baggage, including the HDS AMS, HP EVA, an EMC CLARiiON CX4 systems. Instead, we decided to keep the what we wanted from our other successful IBM products.
Inspired by our successful XIV storage system, IBM has developed a web-based GUI that focuses on ease-of-use. This GUI uses the latest HTML5 and dojo widgets to provide an incredible user experience.
Borrowed from our IBM DS8000 high-end disk systems, state-of-the-art device adapters provide 6 Gbps SAS connectivity with a variety of RAID levels: 0, 1, 5, 6, and 10.
From our SAN Volume Controller, the embedded [ SVC 6.1 firmware] provides all of the features and functions normally associated with enterprise-class systems, including Easy Tier sub-LUN automated tiering between Solid-State Drives and Spinning disk, thin provisioning, external disk virtualization, point-in-time FlashCopy, disk mirroring, built-in migration capability, and long-distance synchronous and asynchronous replication.
Finally, the various "internal NDA" that kept me from publishing this sooner have expired, so now I have the long-awaited [Inside System Storage: Volume II], documenting IBM's transformation in its storage strategy, including behind-the-scenes commentary about IBM's acquisitions of XIV and Diligent. Available initially in paperback form. I am still working on the hard cover and eBook editions.
For those who have not yet read my first book, Inside System Storage: Volume I, it is still available from my publisher Lulu, in [hard cover], [paperback] and [eBook] editions.
IBM System Storage DS8800
A lesson IBM learned long ago was not to make radical changes to high-end disk systems, as clients who run mission-critical applications are more concerned about reliability, availability and serviceability than they are performance or functionality. Shipping any product before it was ready meant painfully having to fix the problems in the field instead.
(EMC apparently is learning this same lesson now with their VMAX disk system. Their Engenuity code from Symmetrix DMX4 was ported over to new CLARiiON-based hardware. With several hundred boxes in the field, they have already racked up over 150 severity 1 problems, roughly half of these resulted in data loss or unavailability issues. For the sake of our mutual clients that have both IBM servers and EMC disk, I hope they get their act together soon.)
To avoid this, IBM made incremental changes to the successful design and architecture of its predecessors. The new DS8800 shares 85 percent of the stable microcode from the DS8700 system. Functions like Metro Mirror, Global Mirror, and Metro/Global Mirror, are compatible with all of the previous models of the DS8000 series, as well as previous models of the IBM Enterprise Storage Server (ESS) line.
The previous models of DS8000 series were designed to take in cold air from both front and back, and route the hot air out the top, known as chimney design. However, many companies are re-arranging their data centers into separate cold aisles and hot aisles. The new DS8800 has front-to-back cooling to help accommodate this design.
My colleague Curtis Neal would call the rest of this a "BFD" announcement, which of course stands for "Bigger, Faster and Denser". The new DS8800 scales-up to more drives than its DS8700 predecessor, and can scale-out from a single-frame 2-way system to a multi-frame 4-way system. IBM has upgraded to faster 5GHz POWER6+ processors, with dual-core 8 Gbps FC and FICON host adapters, 8 Gbps device adapters, and 6 Gbps SAS connectivity to smaller form factor (SFF) 2.5-inch SAS drives. IBM Easy Tier will provide sub-LUN automated tiering between Solid-State Drives and spinning disk. The denser packaging with SFF drives means that we can pack over 1000 drives in only three frames, compared to five frames required for the DS8700.
The [IBM System Storage SAN Volume Controller] software release v6.1 brings Easy Tier sub-LUN automated tiering to the rest of the world. IBM Easy Tier moves the hottest, most active extents up to Solid-State Drives (SSD) and moves the coldest, least active down to spinning disk. This works whether the SSD is inside the SVC 2145-CF8 nodes, or in the managed disk pool.
Tired of waiting for EMC to finally deliver FAST v2 for your VMAX? It has been 18 months since they first announced that someday they would have sub-LUN automatic tiering. What is taking them so long? Why not virtualize your VMAX with SVC, and you can have it sooner!
SVC 6.1 also upgrades to a sexy new web-based GUI, which like the one for the IBM Storwize V7000, is based on the latest HTML5 and dojo widget standards. Inspired by the popular GUI from the IBM XIV Storage System, this GUI has greatly improved ease-of-use.
A client asked me to explain "Nearline storage" to them. This was easy, I thought, as I started my IBM career on DFHSM, now known as DFSMShsm for z/OS, which was created in 1977 to support the IBM 3850 Mass Storage System (MSS), a virtual storage system that blended disk drives and tape cartridges with robotic automation. Here is a quick recap:
Online storage is immediately available for I/O. This includes DRAM memory, solid-state drives (SSD), and always-on spinning disk, regardless of rotational speed.
Nearline storage is not immediately available, but can be made online quickly without human intervention. This includes optical jukeboxes, automated tape libraries, as well as spin-down massive array of idle disk (MAID) technologies.
Offline storage is not immediately available, and requires some human intervention to bring online. This can include USB memory sticks, CD/DVD optical media, shelf-resident tape cartridges, or other removable media.
Sadly, it appears a few storage manufacturers and vendors have been misusing the term "Nearline" to refer to "slower online" spinning disk drives. I find this [June 2005 technology paper from Seagate], and this [2002 NetApp Press Release], the latter of which included this contradiction for their "NearStore" disk array. Here is the excerpt:
"Providing online access to reference information—NetApp nearline storage solutions quickly retrieve and replicate reference and archive information maintained on cost-effective storage—medical images, financial models, energy exploration charts and graphs, and other data-intensive records can be stored economically and accessed in multiple locations more quickly than ever"
Which is it, "online access" or "nearline storage"?
If a client asked why slower drives consume less energy or generate less heat, I could explain that, but if they ask why slower drives must have SATA connections, that is a different discussion. The speed of a drive and its connection technology are for the most part independent. A 10K RPM drive can be made with FC, SAS or SATA connection.
I am opposed to using "Nearlne" just to distinguish between four-digit speeds (such as 5400 or 7200 RPM) versus "online" for five-digit speeds (10,000 and 15,000 RPM). The difference in performance between 10K RPM and 7200 RPM spinning disks is miniscule compared to the differences between solid-state drives and any spinning disk, or the difference between spinning disk and tape.
I am also opposed to using the term "Nearline" for online storage systems just because they are targeted for the typical use cases like backup, archive or other reference information that were previously directed to nearline devices like automated tape libraries.
Can we all just agree to refer to drives as "fast" or "slow", or give them RPM rotational speed designations, rather than try to incorrectly imply that FC and SAS drives are always fast, and SATA drives are always slow? Certainly we don't need new terms like "NL-SAS" just to represent a slower SAS connected drive.
If you store your VMware bits on external SAN or NAS-based disk storage systems, this post is for you. The subject of the post, VM Volumes, is a potential storage management game changer!
Fellow blogger Stephen Foskett mentioned VM Volumes in his [Introducing VMware vSphere Storage Features] presentation at IBM Edge 2012 conference. His session on VMware's storage features included VMware APIs for Array Integration (VAAI), VMware Array Storage Awareness (VASA), vCenter plug-ins, and a new concept he called "vVol", now more formally known as VM Volumes. This post provides a follow-up to this, describing the VM Volumes concepts, architecture, and value proposition.
"VM Volumes" is a future architecture that VMware is developing in collaboration with IBM and other major storage system vendors. So far, very little information about VM Volumes has been released. At VMworld 2012 Barcelona, VMware highlights VM Volumes for the first time and IBM demonstrates VM Volumes with the IBM XIV Storage System (more about this demo below). VM Volumes is worth your attention -- when it becomes generally available, everyone using storage arrays will have to reconsider their storage management practices in a VMware environment -- no exaggeration!
But enough drama. What is this all about?
(Note: for the sake of clarity, this post refers to block storage only. However, the VM Volumes feature applies to NAS systems as well. Special thanks to Yossi Siles and the XIV development team for their help on this post!)
The VM Volumes concept is simple: VM disks are mapped directly to special volumes on a storage array system, as opposed to storing VMDK files on a vSphere datastore.
The following images illustrate the differences between the two storage management paradigms.
You may still be asking yourself: bottom line, how will I benefit from VM Volumes?
Well, take a VM snapshot for example. With VM Volumes, vSphere can simply offload the operation by invoking a hardware snapshot of the hardware volume. This has significant implications:
VM-Granularity: Only the right VMs are copied (with datastores, backing up or cloning individual-VM portions of hardware snapshot of a datastore would require more complex configuration, tools and work)
Hardware Offload: No ESXi server resources are consumed
XIV advantage: With XIV, snapshots consume no space upfront and are completed instantly.
Here's the first takeaway: With VM Volumes, advanced storage services (which cost a lot when you buy a storage array), will become available at an individual VM level. In a cloud world, this means that applications can be provisioned easily with advanced storage services, such as snapshots and mirroring.
Now, let's take a closer look at another relevant scenario where VM Volumes will make a lot of difference - provisioning an application with special mirroring requirements:
VM Volumes case: The application is ordered via the private cloud portal. The requestor checks a box requesting an asynchronous mirror. He changes the default RPO for his needs. When the request is submitted, the process wraps up automatically: Volumes are created on one of the storage arrays, configured with a mirror and RPO exactly as specified. A few minutes later, the requestor receives an automatic mail pointing to the application virtual machine.
Datastores case #1: As may be expected, a datastore that is mirrored with the special RPO does not exist. As a result, the automated workflow sets a pending status on the request, creates an urgent ticket to a VMware administrator and aborts. When the VMware admin handles that ticket, she re-assigns the ticket to the storage administrator, asking for a new volume which is mirrored with the special RPO, and mapped to the right ESXi cluster. The next day, the volume is created; the ticket is re-assigned to the storage admin, with the new LUN being pointed to. The VMware administrator follows and creates the datastore on top of it. Since the automated workflow was aborted, the admin re-assigns the ticket to the cloud administrator, who sometime later completes the application provisioning manually.
Datastores case #2: Luckily for the requestor, a datastore that is mirrored with the special RPO does exist. However, that particular datastore is consuming space from a high performance XIV Gen3 system with SSD caching, while the application does not require that level of performance, so the workflow requires a storage administrator approval. The approval is given to save time, but the storage administrator opens a ticket for himself to create a new volume on another array, as well as a follow-up ticket for the VMware admin to create a new datastore using the new volume and migrate the application to the other datastore. In this case, provisioning was relatively rapid, but required manual follow up, involving the two administrators.
Here's the second takeaway: With VM Volumes, management is simplified, and end-to-end automation is much more applicable. The reason is that there are no datastores. Datastores physically group VMs that may otherwise be totally unrelated, and require close coordination between storage and VMware administrators.
Now, the above mainly focuses on the VMware or cloud administrator perspective. How does VM Volumes impact storage management?
VM's are the new hosts: Today, storage administrators have visibility of physical hosts in their management environment. In a non-virtualized environment, this visibility is very helpful. The storage administrator knows exactly which applications in a data center are storage-provisioned or affected by storage management operations because the applications are running on well-known hosts. However, in virtualized environments the association of an application to a physical host is temporary. To keep at least the same level of visibility as in physical environments, VMs should become part of the storage management environment, like hosts. Hosts are still interesting, for example to manage physical storage mapping, but without VM visibility, storage administrators will know less about their operation than they are used to, or need to. VM Volumes enables such visibility, because volumes are provided to individual VMs. The XIV VM Volumes demonstration at VMworld Barcelona, although experimental, shows a view of VM volumes, in XIV's management GUI.
Here's a screenshot:
That's not all!
Storage Profiles and Storage Containers: A Storage Profile is a vSphere specification of a set of storage services. A storage profile can include properties like thin or thick provisioning, mirroring definition, snapshot policy, minimum IOPS, etc.
Storage administrators define a portfolio of supported storage services, maintained as a set of storage profiles, and published (via VASA integration) to vSphere.
VMware or cloud administrators define the required storage profiles for specific applications
VMware and storage administrators need to coordinate the typical storage requirements and the automatically-available storage services. When a request to provision an application is made, the associated storage profiles are matched against the published set of available storage profiles. The matching published profiles will be used to create volumes, which will be bound to the application VMs. All that will happen automatically.
Note that when a VM is created today, a datastore must be specified. With VM Volumes, a new management entity called Storage Container (also known as Capacity Pool) replaces the use of datastore as a management object. Each Storage Container exposes a subset of the available storage profiles, as appropriate. The storage container also has a capacity quota.
Here are some more takeaways:
New way to interface vSphere and storage management: Storage administrators structure and publish storage services to vSphere via storage profiles and storage containers.
Automated provisioning, out of the box: The provisioning process automatically matches application-required storage profiles against storage profiles available from the specified storage containers. There is no need to build custom scripts and custom processes to automate storage provisioning to applications
The XIV advantage:
XIV services are very simple to define and publish. The typical number of available storage profiles would be low. It would also be easy to define application storage profiles.
XIV provides consistent high performance, up to very high capacity utilization levels, without any maintenance. As a result, automated provisioning (which inherently implies less human attention) will not create an elevated risk of reduced performance.
Note: A storage vendor VASA provider is required to support VM Volumes, storage profiles, storage containers and automated provisioning. The IBM Storage VASA provider runs as a standalone service that needs to be deployed on a server.
To summarize the VM Volumes value proposition:
Streamline cloud operation by providing storage services at VM and application level, enabling end-to-end provisioning automation, and unifying VMware and storage administration around volumes and VMs.
Increase storage array ROI, improve vSphere scalability and response time, and reduce cloud provisioning lag, by offloading VM-level provisioning, failover, backup, storage migration, storage space recycling, monitoring, and more, to the storage array, using advanced storage operations such as mirroring and snapshots.
Simplify the adoption of VM Volumes using XIV, with smaller and simpler sets of storage profiles. Apply XIV's supreme fast cloning to individual VMs, and keep automation risks at bay with XIV's consistent high performance.
Until you can get your hands on a VM Volumes-capable environment, the VMware and IBM developer groups will be collaborating and working hard to realize this game-changing feature. The above information is definitely expected to trigger your questions or comments, and our development teams are eager to learn from them and respond. Enter your comments below, and I will try to answer them, and help shape the next post on this subject. There's much more to be told.
Here I am, day 11 of a 17-day business trip, on my last leg of the trip this week, in Kuala Lumpur in Malaysia. I have been flooded with requests to give my take on EMC's latest re-interpretation of storage virtualization, VPLEX.
I'll leave it to my fellow IBM master inventor Barry Whyte to cover the detailed technical side-by-side comparison. Instead, I will focus on the business side of things, using Simon Sinek's Why-How-What sequence. Here is a [TED video] from Garr Reynold's post
[The importance of starting from Why].
Let's start with the problem we are trying to solve.
Problem: migration from old gear to new gear, old technology to new technology, from one vendor to another vendor, is disruptive, time-consuming and painful.
Given that IT storage is typically replaced every 3-5 years, then pretty much every company with an internal IT department has this problem, the exception being those companies that don't last that long, and those that use public cloud solutions. IT storage can be expensive, so companies would like their new purchases to be fully utilized on day 1, and be completely empty on day 1500 when the lease expires. I have spoken to clients who have spent 6-9 months planning for the replacement or removal of a storage array.
A solution to make the data migration non-disruptive would benefit the clients (make it easier for their IT staff to keep their data center modern and current) as well as the vendors (reduce the obstacle of selling and deploying new features and functions). Storage virtualization can be employed to help solve this problem. I define virtualization as "technology that makes one set of resources look and feel like a different set of resources, preferably with more desirable characteristics.". By making different storage resources, old and new, look and feel like a single type of resource, migration can be performed without disrupting applications.
Before VPLEX, here is a breakdown of each solution:
Non-disruptive tech refresh, and a unified platform to provide management and functionality across heterogeneous storage.
Non-disruptive tech refresh, and a unified platform to provide management and functionality between internal tier-1 HDS storage, and external tier-2 heterogeneous storage.
Non-disruptive tech refresh, with unified multi-pathing driver that allows host attachment of heterogeneous storage.
New in-band storage virtualization device
Add in-band storage virtualization to existing storage array
New out-of-band storage virtualization device with new "smart" SAN switches
SAN Volume Controller
HDS USP-V and USP-VM
For IBM, the motivation was clear: Protect customers existing investment in older storage arrays and introduce new IBM storage with a solution that allows both to be managed with a single set of interfaces and provide a common set of functionality, improving capacity utilization and availability. IBM SAN Volume Controller eliminated vendor lock-in, providing clients choice in multi-pathing driver, and allowing any-to-any migration and copy services. For example, IBM SVC can be used to help migrate data from an old HDS USP-V to a new HDS USP-V.
With EMC, however, the motivation appeared to protect software revenues from their PowerPath multi-pathing driver, TimeFinder and SRDF copy services. Back in 2005, when EMC Invista was first announced, these three software represented 60 percent of EMC's bottom-line profit. (Ok, I made that last part up, but you get my point! EMC charges a lot for these.)
Back in 2006, fellow blogger Chuck Hollis (EMC) suggested that SVC was just a [bump in the wire] which could not possibly improve performance of existing disk arrays. IBM showed clients that putting cache(SVC) in front of other cache(back end devices) does indeed improve performance, in the same way that multi-core processors successfully use L1/L2/L3 cache. Now, EMC is claiming their cache-based VPLEX improves performance of back-end disk. My how EMC's story has changed!
So now, EMC announces VPLEX, which sports a blend of SVC-like and Invista-like characteristics. Based on blogs, tweets and publicly available materials I found on EMC's website, I have been able to determine the following comparison table. (Of course, VPLEX is not yet generally available, so what is eventually delivered may differ.)
Scalable, 1 to 4 node-pairs
One size fits all, single pair of CPCs
SVC-like, 1 to 4 director-pairs
Works with any SAN switches or directors
Required special "smart" switches (vendor lock-in)
SVC-like, works with any SAN switches or directors
Broad selection of IBM Subsystem Device Driver (SDD) offered at no additional charge, as well as OS-native drivers Windows MPIO, AIX MPIO, Solaris MPxIO, HP-UX PV-Links, VMware MPP, Linux DM-MP, and comercial third-party driver Symantec DMP.
Limited selection, with focus on priced PowerPath driver
Invista-like, PowerPath and Windows MPIO
Read cache, and choice of fast-write or write-through cache, offering the ability to improve performance.
No cache, Split-Path architecture cracked open Fibre Channel packets in flight, delayed every IO by 20 nanoseconds, and redirected modified packets to the appropriate physical device.
SVC-like, Read and write-through cache, offering the ability to improve performance.
Space-Efficient Point-in-Time copies
SVC FlashCopy supports up to 256 space-efficient targets, copies of copies, read-only or writeable, and incremental persistent pairs.
Like Invista, No
Remote distance mirror
Choice of SVC Metro Mirror (synchronous up to 300km) and Global Mirror (asynchronous), or use the functionality of the back-end storage arrays
No native support, use functionality of back-end storage arrays, or purchase separate product called EMC RecoverPoint to cover this lack of functionality
Limited synchronous remote-distance mirror within VPLEX (up to 100km only), no native asynchronous support, use functionality of back-end storage arrays
Provides thin provisioning to devices that don't offer this natively
Like Invista, No
SVC Split-Cluster allows concurrent read/write access of data to be accessed from hosts at two different locations several miles apart
I don't think so
PLEX-Metro, similar in concept but implemented differently
Non-disruptive tech refresh
Can upgrade or replace storage arrays, SAN switches, and even the SVC nodes software AND hardware themselves, non-disruptively
Tech refresh for storage arrays, but not for Invista CPCs
Tech refresh of back end devices, and upgrade of VPLEX software, non-disruptively. Not clear if VPLEX engines themselves can be upgraded non-disruptively like the SVC.
Heterogeneous Storage Support
Broad support of over 140 different storage models from all major vendors, including all CLARiiON, Symmetrix and VMAX from EMC, and storage from many smaller startups you may not have heard of
Invista-like. VPLEX claims to support a variety of arrays from a variety of vendors, but as far as I can find, only DS8000 supported from the list of IBM devices. Fellow blogger Barry Burke (EMC) suggests [putting SVC between VPLEX and third party storage devices] to get the heterogeneous coverage most companies demand.
Back-end storage requirement
Must define quorum disks on any IBM or non-IBM back end storage array. SVC can run entirely on non-IBM storage arrays
HP SVSP-like, requires at least one EMC storage array to hold metadata
SVC 2145-CF8 model supports up to four solid-state drives (SSD) per node that can treated as managed disk to store end-user data
Invista-like. VPLEX has an internal 30GB SSD, but this is used only for operating system and logs, not for end-user data.
In-band virtualization solutions from IBM and HDS dominate the market. Being able to migrate data from old devices to new ones non-disruptively turned out to be only the [tip of the iceberg] of benefits from storage virtualization. In today's highly virtualized server environment, being able to non-disruptively migrate data comes in handy all the time. SVC is one of the best storage solutions for VMware, Hyper-V, XEN and PowerVM environments. EMC watched and learned in the shadows, taking notes of what people like about the SVC, and decided to follow IBM's time-tested leadership to provide a similar offering.
EMC re-invented the wheel, and it is round. On a scale from Invista (zero) to SVC (ten), I give EMC's new VPLEX a six.
( I cannot take credit for coining the new term "bleg". I saw this term firstused over on the [FreakonomicsBlog]. If you have not yet read the book "Freakonomics", I highly recommend it! The authors' blog is excellent as well.)
For this comparison, it is important to figure out how much workload a mainframe can support, how much an x86 cansupport, and then divide one from the other. Sounds simple enough, right? And what workload should you choose?IBM chose a business-oriented "data-intensive" workload using Oracle database. (If you wanted instead a scientific"compute-intensive" workload, consider an [IBM supercomputer] instead, the most recent of which clocked in over 1 quadrillion floating point operations per second, or PetaFLOP.) IBM compares the following two systems:
Sun Fire X2100 M2, model 1220 server (2-way)
IBM did not pick a wimpy machine to compare against. The model 1220 is the fastest in the series, with a 2.8Ghz x86-64 dual-core AMD Opteron processor, capable of running various levels of Solaris, Linux or Windows.In our case, we will use Oracle workloads running on Red Hat Enterprise Linux.All of the technical specifications are available at the[Sun Microsystems Sun Fire X1200] Web site.I am sure that there are comparable models from HP, Dell or even IBM that could have been used for this comparison.
IBM z10 Enterprise Class mainframe model E64 (64-way)
This machine can run a variety of operating systems also, including Red Hat Enterprise Linux (RHEL). The E64 has four "multiple processor modules" called"processor books" for a total of 77 processing units: 64 central processors, 11 system assist processors (SAP) and 2 spares. That's right, spare processors, in case any others gobad, IBM has got your back. You can designate a central processor in a variety of flavors. For running z/VM and Linux operating systems, the central processors can be put into "Integrated Facility for Linux" (IFL) mode.On IT Jungle, Timothy Patrick Morgan explains the z10 EC in his article[IBM Launches 64-Way z10 Enterprise Class Mainframe Behemoth]. For more information on the z10 EC, see the 110-page [Technical Introduction], orread the specifications on the[IBM z10 EC] Web site.
In a shop full of x86 servers, there are production servers, test and development servers, quality assuranceservers, standby idle servers for high availability, and so on. On average, these are only 10 percent utilized.For example, consider the following mix of servers:
125 Production machines running 70 percent busy
125 Backup machines running idle ready for active failover in case a production machine fails
1250 machines for test, development and quality assurance, running at 5 percent average utilization
While [some might question, dispute or challenge thisten percent] estimate, it matches the logic used to justify VMware, XEN, Virtual Iron or other virtualization technologies. Running 10 to 20 "virtual servers" on a single physical x86 machine assumes a similar 5-10 percent utilization rate.
Note: The following paragraphs have been revised per comments received.
Now the math. Jon, I want to make it clear I was not involved in writing the press release nor assisted with thesemath calculations. Please, don't shoot the messenger! Remember this cartoon where two scientists in white lab coats are writing mathcalculations on a chalkboard, and in the middle there is "and then a miracle happens..." to continue the rest ofthe calculations?
In this case, the miracle is the number that compares one server hardware platform to another. I am not going to bore people with details like the number of concurrent processor threads or the differencesbetween L1 and L3 cache. IBM used sophisticated tools and third party involvement that I am not allowed to talk about, and I have discussed this post with lawyers representing four (now five) different organizations already,so for the purposes of illustration and explanation only, I have reverse-engineered a new z10-to-Opteron conversion factor as 6.866 z10 EC MIPS per GHz of dual-core AMD Opteron for I/O-intensive workloads running only 10 percent average CPU utilization. Business applications that perform a lot of I/O don't use their CPU as much as other workloads.For compute-intensive or memory-intensive workloads, the conversion factor may be quite different, like 200 MIPS per GHz, as Jeff Savit from Sun Microsystems points out in the comments below.
Keep in mind that each processor is different, and we now have Intel, AMD, SPARC, PA-RISC and POWER (and others); 32-bit versus 64-bit; dual-core and quad-core; and different co-processor chip sets to worry about. AMD Opteron processors come in different speeds, but we are comparing against the 2.8GHz, so 1500 times 6.866 times 2.8 is 28,337. Since these would be running as Linux guestsunder z/VM, we add an additional 7 percent overhead or 2,019 MIPS. We then subtract 15 percent for "smoothing", whichis what happens when you consolidate workloads that have different peaks and valleys in workload, or 4,326 MIPS.The end is that we need a machine to do 26,530 MIPS. Thanks to advances in "Hypervisor" technological synergy between the z/VM operating system and the underlying z10 EC hardware, the mainframe can easily run 90 percent utilized when aggregating multiple workloads, so a 29,477 MIPS machine running at 90 percent utilization can handle these 26,530 MIPS.
N-way machines, from a little 2-way Sun Fire X2100 to the might 64-way z10 EC mainframe, are called "Symmetric Multiprocessors". All of the processors or cores are in play, but sometimes they have to taketurns, wait for exclusive access on a shared resource, such as cache or the bus. When your car is stopped at a red light, you are waiting for your turn to use the shared "intersection". As a result, you don't get linear improvement, but rather you get diminishing returns. This is known generically as the "SMP effect", and in IBM documentsthis as [Large System Performance Reference].While a 1-way z10 EC can handle 920 MIPS, the 64-way can only handle30,657 MIPS. The 29,477 MIPS needed for the Sun x2100 workload can be handled by a 61-way, giving you three extraprocessors to handle unexpected peaks in workload.
But are 1500 Linux guest images architecturally possible? A long time ago, David Boyes of[Sine Nomine Associates] ran 41,400 Linux guest images on a single mainframe using his [Test Plan Charlie], and IBM internallywas able to get 98,000 images, and in both cases these were on machines less powerful than the z10 EC. Neitherof these were tests ran I/O intensive workloads, but extreme limits are always worth testing. The 1500-to-1 reduction in IBM's press release is edge-of-the-envelope as well, so in production environments, several hundred guest images are probably more realistic, and still offer significant TCO savings.
The z10 EC can handle up to 60 LPARs, and each LPAR can run z/VM which acts much like VMware in allowing multipleLinux guests per z/VM instance. For 1500 Linux guests, you could have 25 guests each on 60 z/VM LPARs, or 250 guests on each of six z/VM LPARs, or 750 guests on two LPARs. with z/VM 5.3, each LPAR can support up to 256GB of memory and 32 processors, so you need at least two LPAR to use all 64 engines. Also, there are good reasons to have different guests under different z/VM LPARs, such as separating development/test from production workloads. If you had to re-IPLa specific z/VM LPAR, it could be done without impacting the workloads on other LPARs.
To access storage, IBM offers N-port ID Virtualization (NPIV). Without NPIV, two Linux guest images could not accessthe same LUN through the same FCP port because this would confuse the Host Bus Adapter (HBA), which IBM calls "FICON Express" cards. For example, Linux guest 1 asks to read LUN 587 block 32 and this is sent out a specific port, to a switch, to a disk system. Meanwhile, Linux guest 2 asks to read LUN 587 block 49. The data comes back to the z10 EC with the data, gives it to the correct z/VM LPAR, but then what? How does z/VM know which of the many Linux guests to give the data to? Both touched the same LUN, so it is unclear which made the request. To solve this, NPIV assigns a virtual "World Wide Port Name" (WWPN), up to 256 of them per physical port, so you can have up to 256 Linux guests sharing the same physical HBA port to access the same LUN.If you had 250 guests on each of six z/VM LPARs, and each LPAR had its own set of HBA ports, then all 1500 guestscould access the same LUN.
Yes, the z10 EC machines support Sysplex. The concept is confusing, but "Sysplex" in IBM terminology just means that you can have LPARs either on the same machine or on separate mainframes, all sharing the same time source, whether this be a "Sysplex Timer" or by using the "Server Time Protocol" (STP). The z10 EC can have STP over 6 Gbps Infiniband over distance. If you wantedto have all 1500 Linux guests time stamp data identically, all six z/VM LPARs need access to the shared time source. This can help in a re-do or roll-back situation for Oracle databases to complete or back-out "Units of Work" transactions. This time stamp is also used to form consistency groups in "z/OS Global Mirror", formerly called "XRC" for Extended Remote Distance Copy. Currently, the "timestamp" on I/O applies only to z/OS and Linux and not other operating systems. (The time stamp is done through the CDK driver on Linux, and contributed back to theopen source community so that it is available from both Novell SUSE and Red Hat distributions.)To have XRC have consistency between z/OS and Linux, the Linux guests would need to access native CKD volumes,rather than VM Minidisks or FCP-oriented LUNs.
Note: this is different than "Parallel Sysplex" which refers to having up to 32 z/OS images sharing a common "Coupling Facility" which acts as shared memory for applications. z/VM and Linux do not participate in"Parallel Sysplex".
As for the price, mainframes list for as little as "six figures" to as much as several million dollars, but I have no idea how much this particular model would cost. And, of course, this is just the hardware cost. I could not find the math for the $667 per server replacement you mentioned, so don't have details on that.You would need to purchase z/VM licenses, and possibly support contracts for Linux on System z to be fully comparable to all of the software license and support costs of the VMware, Solaris, Linux and/or Windows licenses you run on the x86 machines.
This is where a lot of the savings come from, as a lot of software is licensed "per processor" or "per core", and so software on 64 mainframe processors can be substantially less expensive than 1500 processors or 3000 cores.IBM does "eat its own cooking" in this case. IBM is consolidating 3900 one-application-each rack-mounted serversonto 30 mainframes, for a ratio of 130-to-1 and getting amazingly reduced TCO. The savings are in the followingareas:
Hardware infrastructure. It's not just servers, but racks, PDUs, etc. It turns out to be less expensive to incrementally add more CPU and storage to an existing mainframe than to add or replace older rack-em-and-stack-emwith newer models of the same.
Cables. Virtual servers can talk to each other in the same machine virtually, such as HiperSockets, eliminatingmany cables. NPIV allows many guests to share expensive cables to external devices.
Networking ports. Both LAN and SAN networking gear can be greatly reduced because fewer ports are needed.
Administration. We have Universities that can offer a guest image for every student without having a majorimpact to the sys-admins, as the students can do much of their administration remotely, without having physicalaccess to the machinery. Companies uses mainframe to host hundreds of virtual guests find reductions too!
Connectivity. Consolidating distributed servers in many locations to a mainframe in one location allows youto reduce connections to the outside world. Instead of sixteen OC3 lines for sixteen different data centers, you could have one big OC48 line instead to a single data center.
Software licenses. Licenses based on servers, cores or CPUs are reduced when you consolidate to the mainframe.
Floorspace. Generally, floorspace is not in short supply in the USA, but in other areas it can be an issue.
Power and Cooling. IBM has experienced significant reduction in power consumption and cooling requirementsin its own consolidation efforts.
All of the components of DFSMS (including DFP, DFHSM, DFDSS and DFRMM) were merged into a single product "DFSMS for z/OS" and is now an included element in the base z/OS operating system. As a result of these, customers typically have 80 to 90 percent utilization on their mainframe disk. For the 1500 Linux guests, however, most of the DFSMS features of z/OS do not apply. These functions were not "ported over" to z/VM nor Linux on any platform.
Instead, the DFSMS concepts have been re-implemented into a new product called "Scale-Out File Services" (SOFS) which would provide NAS interfaces to a blendeddisk-and-tape environment. The SOFS disk can be kept at 90 percent utilization because policies can place data, movedata and even expire files, just like DFSMS does for z/OS data sets. SOFS supports standard NAS protocols such as CIFS,NFS, FTP and HTTP, and these could be access from the 1500 Linux guests over an Ethernet Network Interface Card (NIC), which IBM calls "OSA Express" cards.
Lastly, IBM z10 EC is not emulating x86 or x86-64 interfaces for any of these workloads. No doubt IBM and AMD could collaborate together to come up with an AMD Opteron emulator for the S/390 chipset, and load Windows 2003 right on top of it, but that would just result in all kinds of emulation overhead.Instead, Linux on System z guests can run comparable workloads. There are many Linux applications that are functionally equivalent or the same as their Windows counterparts. If you run Oracle on Windows, you could runOracle on Linux. If you run MS Exchange on Windows, you could run Bynari on Linux and let all of your Outlook Expressusers not even know their Exchange server had been moved! Linux guest images can be application servers, web servers, database servers, network infrastructure servers, file servers, firewall, DNS, and so on. For nearly any business workload you can assign to an x86 server in a datacenter, there is likely an option for Linux on System z.
Hope this answers all of your questions, Jon. These were estimates based on basic assumptions. This is not to imply that IBM z10 EC and VMware are the only technologies that help in this area, you can certainly find virtualization on other systems and through other software.I have asked IBM to make public the "TCO framework" that sheds more light on this.As they say, "Your mileage may vary."
For more on this series, check out the following posts:
If in your travels, Jon, you run into someone interested to see how IBM could help consolidate rack-mounted servers over to a z10 EC mainframe, have them ask IBM for a "Scorpion study". That is the name of the assessment that evaluates a specific clientsituation, and can then recommend a more accurate estimate configuration.
However, I have to assume his real question is ... "what is the quick and easy way for me to build a lightweight database app like Microsoft Access that I can distribute as a standalone executable?"
To which I would say "Lotus has a program called Approach, which is part of Lotus SmartSuite, which some people still use. However, a lot of the focus in IBM now centers around the lightweight Cloudscape database which IBM acquired from Informix, which is now known as the [open source project called Derby]. Many IBM and Lotus products, such as Lotus Expeditor use the JDBC connection to Derby, which allows you to use Windows, Linux, Flash, etc. ... with no vendor lock in".
I am familiar with Cloudscape, and I evaluated it as a potential database for IBM TotalStorage Productivity Center, when I was the lead architect defining the version 1 release. It runs entirely on Java, which is both a plus and minus. Plus in that it runs anywhere Java runs, but a minus in that it is not optimized for high performance or large scalability. Because of this, we decided instead on using the full commercial DB2 database instead for Productivity Center.
Not to be undone, my colleagues over at DB2 offered a different alternative, [DB2 Express-C], which runs on a variety of Windows, Linux-x86, and Linux on POWER platforms. It is "free" as in beer, not free as in speech, which means you can download and use it today at no charge, and even ship products with it included, but you are not allowed to modify and distribute altered versions of it, as you can with "free as in speech" open source code, as in the case of Derby above (see [Apache License 2.0"] for details).
As I see it, DB2 Express-C has two key advantages. First, if you like the free version, you can purchase a "support contract" for those that need extra hand-holding, or are using this as part of a commercial business venture. Second,for those who do prefer vendor lock-in, it is easyto upgrade Express-C to the full IBM DB2 database product, so if you are developing a product intended for use with DB2, you can develop it first with DB2 Express-C, and migrate up to full DB2 commercial version when you are ready.
This is perhaps more information than you probably expected for such a simple question. Meanwhile, I am stilltrying to figure out MySQL as part of my [OLPC volunteer project].
The IBM Challenge was a big success. One of the contestants, Ken Jennings, [welcomes our new computer overlords]. Congratulations are in order to the IBM Research team who pulled off this Herculean effort!
Some folks have poked fun at some of the odd responses and wager amounts from the IBM Watson computer during the three-day tournament. Others were surprised as I was that the impressive feat was done with less than 1TB of stored data. Here is what John Webster wrote in CNET yesterday, in hist article [What IBM's Watson says to storage systems developers]:
"All well and good. But here's what I find most interesting as a result of what IBM has done in response to the Grand Challenge that motivated Watson's creators. We know, from Tony Pearson's blog, that the foundation of Watson's data storage system is a modified IBM SONAS cluster with a total of 21.6TB of raw capacity. But Pearson also reveals another very significant, and to me, surprising data point: "When Watson is booted up, the 15TB of total RAM are loaded up, and thereafter the DeepQA processing is all done from memory. According to IBM Research, the actual size of the data (analyzed and indexed text, knowledge bases, etc.) used for candidate answer generation and evidence evaluation is under 1 Terabyte."
What Pearson just said is that the data set Watson actually uses to reach his push-the-button decision would fit on a 1TB drive. So much for big data?"
To better appreciate how difficult the challenge was, and how a small amount of data can answer a billion different questions, I thought I would cover Business Intelligence, Data Retrieval and Text Mining concepts.
"In this paper, business is a collection of activities carried
on for whatever purpose, be it science, technology,
commerce, industry, law, government, defense, et cetera.
The communication facility serving the conduct of a business
(in the broad sense) may be referred to as an intelligence
system. The notion of intelligence is also defined
here, in a more general sense, as the ability to apprehend
the interrelationships of presented facts in such a way as
to guide action towards a desired goal."
Ideally, when you need "Business Intelligence" to help you make a better decision, you perform data retrieval from a structured database for the specific information you are looking for. In other cases, you might be looking for insight, patterns or trends. In that case, you go "data mining" against your structured databases.
Here's a simple example. John runs a fruit stand. One day, he kept track of how many apples and oranges were bought by men and women. How many questions can we ask against this small set of data? Let's count them:
How many apples were sold to men?
How many apples were sold to women?
How many oranges were sold to men?
How many oranges were sold to women?
But wait! For each row and column, we can combine them into totals.
How many apples were sold in total?
How many oranges were sold in total?
How many fruit in total were sold to men?
How many fruit in total were sold to women?
How many fruit in total were sold?
But wait, there's more! Each row and column can be evaluated for relative percentages, as well as percentages of each cell compared to the total. You could make five relevant pie-charts from this data. This results in 16 more questions, such as:
Of the fruit purchased by men, what percentage for apples?
Of all the apples purchased, what percentage by women?
And that's not including more ethereal questions, such as:
Are there gender-specific preferences for different types of fruit?
What type of fruit do men prefer?
This is just for a small set, two market segments (by gender) and two products (apples and oranges). However, if you have many market segments (perhaps by age group, zip code, etc.) and many products, the number of queries that can be supported is huge. For small sets of data, you can easily do this with a spreadsheet program like IBM Lotus Symphony or Microsoft Excel.
But why limit yourself to two dimensions? The above example was just for one day's worth of activity, if John captures this data for every day for historical and seasonal trending, it can be represented as a three-dimensional cube. The number of queries becomes astronomical. This is the basis for Online Analytical Processing (OLAP), and three-dimensional tables are often referred to as [OLAP cubes].
Back in 1970, IBM invented the Structured Query Language [SQL], and today, nearly all modern relational databases support this, including IBM DB2, Informix, Microsoft SQL Server, and Oracle DB. SQL poses two challenges. First, you had to structure the data in advance to the way you expect to perform your ad-hoc queries. Deciding the groups and categories in advance can limit the way information is recorded and captured.
Second, you had to be skilled at SQL to phrase your queries correctly to retrieve the data you are after. What ended up happening was that skilled SQL programmers would develop "canned reports" with fixed SQL parameters, so that less-skilled business decision makers could base their decisions from these reports.
IBM has fully integrated stacks to help process structured data, combining servers, storage, and advanced analytics software into a complete appliance. IBM offers the [Smart Analytics System] for robust, customized deployments, and recently acquired [Netezza] for pre-configured, and more rapid deployments.
However, the bigger problem is that more than 80 percent of information is not structured!
Semi-structured data like email provides some searchable fields like From and Subject. The rest of the information is unstructured, such as text files, photographs, video and audio. To look for specific information in unstructured sources can be like looking for a needle in a haystack, and trying to get insight, patterns or trends involves text mining.
This, in effect, is what IBM Watson was able to perform so well this week. Finding the needle in the haystacks of unstructured data from 200 million pages of text stored in its system, combined with the ability to apprehend the interrelationships of meaning and subtle nuance, resulted in an impressive technology demonstration. Certainly, this new technology will be powerful for a variety of use cases across a broad set of industries!
Tonight PBS plans to air Season 38, Episode 6 of NOVA, titled [Smartest Machine On Earth]. Here is an excerpt from the station listing:
"What's so special about human intelligence and will scientists ever build a computer that rivals the flexibility and power of a human brain? In "Artificial Intelligence," NOVA takes viewers inside an IBM lab where a crack team has been working for nearly three years to perfect a machine that can answer any question. The scientists hope their machine will be able to beat expert contestants in one of the USA's most challenging TV quiz shows -- Jeopardy, which has entertained viewers for over four decades. "Artificial Intelligence" presents the exclusive inside story of how the IBM team developed the world's smartest computer from scratch. Now they're racing to finish it for a special Jeopardy airdate in February 2011. They've built an exact replica of the studio at its research lab near New York and invited past champions to compete against the machine, a big black box code -- named Watson after IBM's founder, Thomas J. Watson. But will Watson be able to beat out its human competition?"
Like most supercomputers, Watson runs the Linux operating system. The system runs 2,880 cores (90 IBM Power 750 servers, four sockets each, eight cores per socket) to achieve 80 [TeraFlops]. TeraFlops is the unit of measure for supercomputers, representing a trillion floating point operations. By comparison, Hans Morvec, principal research scientist at the Robotics Institute of Carnegie Mellon University (CMU) estimates that the [human brain is about 100 TeraFlops]. So, in the three seconds that Watson gets to calculate its response, it would have processed 240 trillion operations.
Several readers of my blog have asked for details on the storage aspects of Watson. Basically, it is a modified version of IBM Scale-Out NAS [SONAS] that IBM offers commercially, but running Linux on POWER instead of Linux-x86. System p expansion drawers of SAS 15K RPM 450GB drives, 12 drives each, are dual-connected to two storage nodes, for a total of 21.6TB of raw disk capacity. The storage nodes use IBM's General Parallel File System (GPFS) to provide clustered NFS access to the rest of the system. Each Power 750 has minimal internal storage mostly to hold the Linux operating system and programs.
When Watson is booted up, the 15TB of total RAM are loaded up, and thereafter the DeepQA processing is all done from memory. According to IBM Research, "The actual size of the data (analyzed and indexed text, knowledge bases, etc.) used for candidate answer generation and evidence evaluation is under 1TB." For performance reasons, various subsets of the data are replicated in RAM on different functional groups of cluster nodes. The entire system is self-contained, Watson is NOT going to the internet searching for answers.
The technology industry is full of trade-offs. Take for example solar cells that convert sunlight to electricity. Every hour, more energy hits the Earth in the form of sunlight than the entire planet consumes in an entire year. The general trade-off is between energy conversion efficiency versus abundance of materials:
Get 9-11 percent efficiency using rare materials like indium (In), gallium (Ga) or cadmium (Cd).
Get only 6.7 percent efficiency using abundant materials like copper (Cu), tin (Sn), zinc (Zn), sulfur (S), and selenium (Se)
A second trade-off is exemplified by EMC's recent GeoProtect announcement. This appears similar to the geographic dispersal method introduced by a company called [CleverSafe]. The trade-off is between the amount of space to store one or more copies of data and the protection of data in the event of disaster. Here's an excerpt from fellow blogger Chuck Hollis (EMC) titled ["Cloud Storage Evolves"]:
"Imagine a average-sized Atmos network of 9 nodes, all in different time zones around the world. And imagine that we were using, say, a 6+3 protection scheme.
The implication is clear: any 3 nodes could be completely lost: failed, destroyed, seized by the government, etc.
-- and the information could be completely recovered from the surviving nodes."
For organizations worried about their information falling into the wrong hands (whether criminal or government sponsored!), any subset of the nodes would yield nothing of value -- not only would the information be presumably encrypted, but only a few slices of a far bigger picture would be lost.
Seized by the government?falling into the wrong hands? Is EMC positioning ATMOS as "Storage for Terrorists"? I can certainly appreciate the value of being able to protect 6PB of data with only 9PB of storage capacity, instead of keeping two copies of 6PB each, the trade-off means that you will be accessing the majority of your data across your intranet, which could impact performance. But, if you are in an illicit or illegal business that could have a third of your facilities "seized by the government", then perhaps you shouldn't house your data centers there in the first place. Having two copies of 6PB each, in two "friendly nations", might make more sense.
(In reality, companies often keep way more than just two copies of data. It is not unheard of for companies to keep three to five copies scattered across two or three locations. Facebook keeps SIX copies of photographs you upload to their website.)
ChuckH argues that the governments that seize the three nodes won't have a complete copy of the data. However, merely having pieces of data is enough for governments to capture terrorists. Even if the striping is done at the smallest 512-byte block level, those 512 bytes of data might contain names, phone numbers, email addresses, credit cards or social security numbers. Hackers and computer forensics professionals take advantage of this.
You might ask yourself, "Why not just encrypt the data instead?" That brings me to the third trade-off, protection versus application performance. Over the past 30 years, companies had a choice, they could encrypt and decrypt the data as needed, using server CPU cycles, but this would slow down application processing. Every time you wanted to read or update a database record, more cycles would be consumed. This forced companies to be very selective on what data they encrypted, which columns or fields within a database, which email attachments, and other documents or spreadsheets.
An initial attempt to address this was to introduce an outboard appliance between the server and the storage device. For example, the server would write to the appliance with data in the clear, the appliance would encrypt the data, and pass it along to the tape drive. When retrieving data, the appliance would read the encrypted data from tape, decrypt it, and pass the data in the clear back to the server. However, this had the unintended consequences of using 2x to 3x more tape cartridges. Why? Because the encrypted data does not compress well, so tape drives with built-in compression capabilities would not be able to shrink down the data onto fewer tapes.
(I covered the importance of compressing data before encryption in my previous blog post
[Sock Sock Shoe Shoe].)
Like the trade-off between energy efficiency and abundant materials, IBM eliminated the trade-off by offering compression and encryption on the tape drive itself. This is standard 256-bit AES encryption implemented on a chip, able to process the data as it arrives at near line speed. So now, instead of having to choose between protecting your data or running your applications with acceptable performance, you can now do both, encrypt all of your data without having to be selective. This approach has been extended over to disk drives, so that disk systems like the IBM System Storage DS8000 and DS5000 can support full-disk-encryption [FDE] drives.
"When Watson is booted up, the 15TB of total RAM are loaded up, and thereafter the DeepQA processing is all done from memory. According to IBM Research, the actual size of the data (analyzed and indexed text, knowledge bases, etc.) used for candidate answer generation and evidence evaluation is under 1 Terabyte (TB). For performance reasons, various subsets of the data are replicated in RAM on different functional groups of cluster nodes. The entire system is self-contained, Watson is NOT going to the internet searching for answers."
I had several readers ask me to explain the significance of the "Terabyte". I'll work my way up.
A bit is simply a zero (0) or one (1). This could answer a Yes/No or True/False question.
Most computers have standardized a byte as a collection of 8 bits. There are 256 unique combinations of ones and zeros possible, so a byte could be used to storage a 2-digit integer, or a single upper or lower case character in the English alphabet. In pratical terms, a byte could store your age in years, or your middle initial.
The Kilobyte is a thousand bytes, enough to hold a few paragraphs of text. A typical written page could be held in 4 KB, for example.
The IBM Challenge to play on Jeopardy! is being compared to the historic 1969 moon landing. To land on the moon, Apollo 11 had the "Apollo Guidance Computer" (AGC) which had 74KB of fixed read-only memory, and 2KB of re-writeable memory. Over [3500 IBM employees were involved] to get the astronauts to the moon and safely back to earth again.
The importance of this computer was highlighted in a [lecture by astronaut David Scott] who said: "If you have a basketball and a baseball 14 feet apart, where the baseball represents the moon and the basketball represents the Earth, and you take a piece of paper sideways, the thinness of the paper would be the corridor you have to hit when you come back."
The Megabyte is a thousand KB, or a million bytes. The 3.5-inch floppy diskette, mentioned in my post [A Boxfull of Floppies] could hold 1.44MB, or about 360 pages of text.
In the article [Wikipedia as a printed book], the printing of a select 400 articles resulted in a book 29 inches thick. Those 5,000 pages would consume about 20 MB of space.
One of my favorite resources I use to search is the Internet Movie Data Base [IMDB]. Leaving out the photos and videos, the [text-only portion of the IMDB database is just over 600 MB], representing nearly all of the actors, awards, nominations, television shows and movies. A standard CD-ROM can hold 700MB, so the text portion of the IMDB could easily fit on a single CD.
The Gigabyte is a thousand MB, or a billion bytes. My Thinkpad T410 laptop has 4GB of RAM and 320GB of hard disk space. My laptop comes with a DVD burner, and each DVD can hold up to 4.7GB of information.
The popular Wikipedia now has some 17 million articles, of which 3.5 million are in English language. It would only take [14GB of space to hold the entire English portion] of Wikipedia. That is small enough to fit on twenty CDs, three DVDs, an Apple iPad or my cellphone (a Samsung Galaxy S Vibrant).
Perhaps you are thinking, "Someone should offer Wikipedia pre-installed on a small handheld!" Too late. The [The Humane Reader] is able to offer 5,000 books and Wikipedia in a small device that connects to your television. This would be great for people who do not have access to the internet, or for parents who want their kids to do their homework, but not be online while they are doing it.
In the latest 2009 report of [How Much Information?] from the University of California, San Diego, the average American consumes 34 GB of information. This includes all the information from radio, television, newspapers, magazines, books and the internet that a person might look at or listen to throughout the day. This project is sponsored by IBM and others to help people understand the nature of our information-consuption habits.
Back in 1992, I visited a client in Germany. Their 90 GB of disk storage attached to their mainframe was the size of three refrigerators, and took five full-time storage administrators to manage.
The Terabyte is a thousand GB, or a trillion bytes. It is now possible to buy external USB drive for your laptop or personal computer that holds 1TB or more. However, at 40MB/sec speeds that USB 2.0 is capable of, it would take seven hours to do a bulk transfer in or out of the device.
IBM offers 1TB and 2TB disk drives in many of our disk systems. In 2008, IBM was preparing to announce the first 1TB tape drive. However, Sun Microsystems announced their own 1TB drive the day before our big announcement, so IBM had to rephrase the TS1130 announcement to [The World's Fastest 1TB tape drive!]
A typical academic research library will hold about 2TB of information. For the [US Library of Congress] print collection is considered to be about 10TB, and their web capture team has collected 160TB of digital data. If you are ever in the Washington DC, I strongly recommend a visit to the Library of Congress. It is truly stunning!
Full-length computer animated movies, like [Happy Feet], consume about 100TB of disk storage during production. IBM offers disk systems that can hold this much data. For example, the IBM XIV can hold up to 151 TB of usable disk space in the size of one refrigerator.
A Key Performance Indicator (KPI) for some larger companies is the number of TB that can be managed by a full-time employee, referred to as TB/FTE. Discussions about TB/FTE are available from IT analysts including [Forrester Research] and [The Info Pro].
The website [Ancestry.com] claims to have over 540 million names in its genealogical database, with a storage of 600TB, with the inclusion of [US census data from 1790 to 1930]. The US government took nine years to process the 1880 census, so for the 1890 census, it rented equipment from Herman Hollerith's Tabulating Machine Company. This company would later merge with two others in 1911 to form what is now called IBM.
A Petabyte is thousand TB, or a quadrillion bytes. It is estimated that all printed materials on Earth would represent approximately 200 PB of information.
IBM's largest disk system, the Scale-Out Network Attach Storage (SONAS) comprised of up to 7,200 disk drives, which can hold over 11 PB of information. A smaller 10-frame model, the same size as IBM Watson, with six interface nodes and 19 storage pods, could hold over 7 PB of information.
For those of us in the IT industry, 1TB is small potatoes. I for one, was expecting it to be much bigger. But for everyone else, the equivalent of 200 million pages of text that IBM Watson has loaded inside is an incredibly large repository of information. I suspect IBM Watson probably contains the complete works of Shakespeare as well as other fiction writers, the IMDB database, all 3.5 million articles of Wikipedia, religious texts like the Bible and the Quran, famous documents like the Magna Carta and the US Constitution, and reference books like a Dictionary, a Thesaurus, and "Gray's Anatomy". And, of course, lots and lots of lists.
For those on Twitter, follow [@ibmwatson] these next three days during the challenge.
Wrapping up my coverage of the annual [2010 System Storage Technical University], I attended what might be perhaps the best session of the conference. Jim Nolting, IBM Semiconductor Manufacturing Engineer, presented the new IBM zEnterprise mainframe, "A New Dimension in Computing", under the Federal track.
The zEnterprises debunks the "one processor fits all" myth. For some I/O-intensive workloads, the mainframe continues to be the most cost-effective platform. However, there are other workloads where a memory-rich Intel or AMD x86 instance might be the best fit, and yet other workloads where the high number of parallel threads of reduced instruction set computing [RISC] such as IBM's POWER7 processor is more cost-effective. The IBM zEnterprise combines all three processor types into a single system, so that you can now run each workload on the processor that is optimized for that workload.
IBM zEnterprise z196 Central Processing Complex (CPC)
Let's start with the new mainframe z196 central processing complex (CPC). Many thought this would be called the z11, but that didn't happen. Basically, the z196 machine has a maximum 96 cores versus z10's 64 core maximum, and each core runs 5.2GHz instead of z10's cores running at 4.7GHz. It is available in air-cooled and water-cooled models. The primary operating system that runs on this is called "z/OS", which when used with its integrated UNIX System Services subsystem, is fully UNIX-certified. The z196 server can also run z/VM, z/VSE, z/TPF and Linux on z, which is just Linux recompiled for the z/Architecture chip set. In my June 2008 post [Yes, Jon, there is a mainframe that can help replace 1500 servers], I mentioned the z10 mainframe had a top speed of nearly 30,000 MIPS (Million Instructions per Second). The new z196 machine can do 50,000 MIPS, a 60 percent increase!
The z196 runs a hypervisor called PR/SM that allows the box to be divided into dozens of logical partitions (LPAR), and the z/VM operating system can also act as a hypervisor running hundreds or thousands of guest OS images. Each core can be assigned a specialty engine "personality": GP for general processor, IFL for z/VM and Linux, zAAP for Java and XML processing, and zIIP for database, communications and remote disk mirroring. Like the z9 and z10, the z196 can attach to external disk and tape storage via ESCON, FICON or FCP protocols, and through NFS via 1GbE and 10GbE Ethernet.
IBM zEnterprise BladeCenter Extension (zBX)
There is a new frame called the zBX that basically holds two IBM BladeCenter chassis, each capable of 14 blades, so total of 28 blades per zBX frame. For now, only select blade servers are supported inside, but IBM plans to expand this to include more as testing continues. The POWER-based blades can run native AIX, IBM's other UNIX operating system, and the x86-based blades can run Linux-x86 workloads, for example. Each of these blade servers can run a single OS natively, or run a hypervisor to have multiple guest OS images. IBM plans to look into running other POWER and x86-based operating systems in the future.
If you are already familiar with IBM's BladeCenter, then you can skip this paragraph. Basically, you have a chassis that holds 14 blades connected to a "mid-plane". On the back of the chassis, you have hot-swappable modules that snap into the other side of the mid-plane. There are modules for FCP, FCoE and Ethernet connectivity, which allows blades to talk to each other, as well as external storage. BladeCenter Management modules serve as both the service processor as well as the keyboard, video and mouse Local Console Manager (LCM). All of the IBM storage options available to IBM BladeCenter apply to zBX as well.
Besides general purpose blades, IBM will offer "accelerator" blades that will offload work from the z196. For example, let's say an OLAP-style query is issued via SQL to DB2 on z/OS. In the process of parsing the complicated query, it creates a Materialized Query Table (MQT) to temporarily hold some data. This MQT contains just the columnar data required, which can then be transferred to a set of blade servers known as the Smart Analytics Optimizer (SAO), then processes the request and sends the results back. The Smart Analytics Optimizer comes in various sizes, from small (7 blades) to extra large (56 blades, 28 in each of two zBX frames). A 14-blade configuration can hold about 1TB of compressed DB2 data in memory for processing.
IBM zEnterprise Unified Resource Manager
You can have up to eight z196 machines and up to four zBX frames connected together into a monstrously large system. There are two internal networks. The Inter-ensemble data network (IEDN) is a 10GbE that connects all the OS images together, and can be further subdivided into separate virtual LANs (VLAN). The Inter-node management network (INMN) is a 1000 Mbps Base-T Ethernet that connects all the host servers together to be managed under a single pane of glass known as the Unified Resource Manager. It is based on IBM Systems Director.
By integrating service management, the Unified Resource Manager can handle Operations, Energy Management, Hypervisor Management, Virtual Server Lifecycle Management, Platform Performance Management, and Network Management, all from one place.
IBM Rational Developer for System z Unit Test (RDz)
But what about developers and testers, such as those Independent Software Vendors (ISV) that produce mainframe software. How can IBM make their lives easier?
Phil Smith on z/Journal provides a history of [IBM Mainframe Emulation]. Back in 2007, three emulation options were in use in various shops:
Open Mainframe, from Platform Solutions, Inc. (PSI)
FLEX-ES, from Fundamental Software, Inc.
Hercules, which is an open source package
None of these are viable options today. Nobody wanted to pay IBM for its Intellectual Property on the z/Architecture or license the use of the z/OS operating system. To fill the void, IBM put out an officially-supported emulation environment called IBM System z Professional Development Tool (zPDT) available to IBM employees, IBM Business Partners and ISVs that register through IBM Partnerworld. To help out developers and testers who work at clients that run mainframes, IBM now offers IBM Rational Developer for System z Unit Test, which is a modified version of zPDT that can run on a x86-based laptop or shared IBM System x server. Based on the open source [Eclipse IDE], the RDz emulates GP, IFL, zAAP and zIIP engines on a Linux-x86 base. A four-core x86 server can emulate a 3-engine mainframe.
With RDz, a developer can write code, compile and unit test all without consuming any mainframe MIPS. The interface is similar to Rational Application Developer (RAD), and so similar skills, tools and interfaces used to write Java, C/C++ and Fortran code can also be used for JCL, CICS, IMS, COBOL and PL/I on the mainframe. An IBM study ["Benchmarking IDE Efficiency"] found that developers using RDz were 30 percent more productive than using native z/OS ISPF. (I mention the use of RAD in my post [Three Things to do on the IBM Cloud]).
What does this all mean for the IT industry? First, the zEnterprise is perfectly positioned for [three-tier architecture] applications. A typical example could be a client-facing web-server on x86, talking to business logic running on POWER7, which in turn talks to database on z/OS in the z196 mainframe. Second, the zEnterprise is well-positioned for government agencies looking to modernize their operations and significantly reduce costs, corporations looking to consolidate data centers, and service providers looking to deploy public cloud offerings. Third, IBM storage is a great fit for the zEnterprise, with the IBM DS8000 series, XIV, SONAS and Information Archive accessible from both z196 and zBX servers.
Now an avid reader of my blog has brought this to my attention. Apparently,
EMC has been showing customers a presentation
[Accelerating Storage Transformation with VMAX and VPLEX] with false and misleading comparison claims between IBM DS8000, HDS VSP and EMC VMAX 40K disk system performance.
(FTC Disclosure: This would be a good time to remind my readers that I work for IBM and own IBM stock. I do not endorse any of the EMC or HDS products mentioned in this post, and have no financial affiliation or investments directly with either EMC nor HDS. I am basing my information solely on the presentation posted on the internet and other sources publicly available, and not on any misrepresentations from EMC speakers at the various conferences where these charts might have been shown.)
The problem with misinformation is that it is not always obvious. The EMC presentation is quite pretty and professional-looking. It is the typical slick, attention-getting, low-content, over-simplified marketing puffery you have come to expect from EMC. There are two slides in particular that I have issue with.
This first graphic implies that IBM and HDS are nearly tied in performance, but that EMC VMAX 40K has nearly triple that bandwidth. Overall the slide has very little detail. That makes it difficult to determine what exactly is being claimed and whether a fair comparison is being made.
The title claims that VMAX 40K is "#1 in High Bandwidth Apps". Only three disk systems are shown so the claim appears to be relative to only the three systems. The wording "High Bandwidth Apps" is confusing considering the cited numbers are for disk systems and no application is identified. By comparison, IBM SONAS can drive up to 105 GB/sec sequential bandwidth, nearly double what EMC claims for its VMAX 40K, so EMC is certainly not even close to #1.
Is the workload random or sequential? That is not easy to determine. The use of "GB/s" along with the large block size of 128KB implies the I/O workload is sequential, which is great for some workloads like high performance computing, technical computing and video broadcasts. Random workloads, on the other hand, are usually measured in I/Os per second (IOPS) with a block size ranging 4KB to 64KB. (I am assuming the 128K blocks refers to 128KB block size, and not reading the same block of cache 128,000 times.)
The slide states "Maximum Sustainable RRH Bandwidth 128K Blocks". The acronym "RRH" is not defined; but I suspect this refers to "random read hits". For random workloads, 100 percent random read hits from cache represents one corner of the infamous "four corners" test. Real-world workloads have a mix of reads and writes, and a mix of cache hits and cache misses. It is also unclear whether the hits are from standard data cache or from internal buffers in adapters (perhaps accessing the same blocks repeatedly) or something else. So is this really for a random workload, or a sequential workload?
(The term "Hitachi Math" was coined by an EMC blogger precisely to slam Hitachi Data Systems for their blatant use of four-corners results, claiming that spouting ridiculously large, but equally unrealistic, 100 percent random read hit results don't provide any useful information. I agree. There are much better industry-standard benchmarks available, such as SPC-1 for random workloads, SPC-2 for sequential workloads, and even benchmarks for specific applications, that represent real-world IT environments. To shame HDS for their use of four-corners results, only for EMC themselves to use similar figures in their own presentation is truly hypocritical of them!)
The IBM system is identified as "DS8000". DS8000 is a generic family name that applies to multiple generations of systems first introduced in 2004. The specific model is not identified, but that is critical information. Is this a first generation DS8100, or the latest DS8800, or something in between?
The slide says "Full System Configs", but that is not defined and configuration details are not identified. Configuration details, also critical information in assessing system performance capabilities, are not specified. If the EMC box costs seven times more than IBM or HDS, would you really buy it to get 3x more performance? Is the EMC packed with the maximum amount of SSD? Were there any SSD in the IBM or HDS boxes to match?
The source of the claimed IBM DS8000 performance numbers is not identified. Did they run their own tests? While I cannot tell, the VMAX may have been configured with 64 Fibre Channel 8Gbps host connections. In that case each channel is theoretically capable of supporting about 800 MB/s at 100% channel utilization. Multiplying 64 x 800MB/s = 51.2GB/s, so did EMC just do the performance comparison on the back of a napkin, assuming there are no other bottlenecks in the system? Even then, I would not round up 51.2 to 52!
Response times were not identified. For random I/Os, response time is a very important metric. It is possible that the Symmetrix was operating with some resources at 100% utilization to get the highest GB/s result, but that would likely make I/O response times unacceptable for real-world random I/O workloads.
IBM and HDS have both published Storage Performance Council [SPC] industry-standard performance benchmarks. EMC has not published any SPC benchmarks for VMAX systems. If EMC is interested in providing customers with audited, detailed performance information along with detailed configuration information, all based on benchmarks designed to represent real-world workloads, EMC can always publish SPC benchmark results as IBM and other vendors have done. In past blog fights, EMC resorts to the excuse that SPC isn't perfect, but can they really argue that vague and unrealistic claims cited in its presentation are better?
The second graphic is so absurd, you would think it came directly from Larry Ellison at an Oracle OpenWorld keynote session. EMC is comparing a configuration with VMAX 40K plus an EMC VFCache host-side flash memory cache card to a configuration with an IBM and HDS disk system without host-side flash memory cache also configured. The comparison is clearly apples-to-oranges. Other disk system configuration details are also omitted.
FAST VP is EMC's name for its sub-volume drive tiering feature, comparable to IBM Easy Tier and Hitachi's Dynamic Tiering. The graph implies that IBM and HDS can only achieve a modest increment improvement from their sub-volume tiering. I beg to differ. I have seen various cases where a small amount of SSD on IBM DS8000 series can drastically improve performance 200 to 400 percent.
The "DBClassify" shown on the graph is a tool run as part of an EMC professional services offering called Database Performance Tiering Assessment, makes recommendations for storing various database objects on different drive tiers based on object usage and importance. Do you really need to pay for professional services? With IBM Easy Tier, you just turn it on, and it works. No analysis required, no tools, no professional services, and no additional charge!
VFCache is an optional product from EMC that currently has no integration whatsoever with VMAX. A fair comparison would have included a host-side flash memory cache (from any vendor) when the IBM or HDS storage system was configured. Or leave it out altogether and just focus on the sub-volume tiering comparison.
Keep in mind that EMC's VFCache supports only selected x86-based hosts. IBM has published a [Statement of Direction] indicating that it will also offer this for Power systems running AIX and Linux host-side flash memory cache integrated with DS8000 Easy Tier.
I feel EMC's claims about IBM DS8000 performance are vague and misleading. EMC appears to lack the kind of technical marketing integrity that IBM strives to attain.
Since EMC is not able or willing to publish fair and meaningful performance comparisons, it is up to me to set the record straight and point out EMC's failings in this matter.
Reminder: It's not to late to register for my Webcast "Solving the Storage Capacity Crisis" on Tuesday, September 25. See my blog post [Upcoming events in September] to register!
Well, it's Tuesday again, and you know what that means? IBM announcements!
Today's announcements are all about the Storwize family, IBM's market-leading Software Defined Storage offerings. Having sold over 55,000 systems, and managing over 1.6 Exabytes of data, IBM continues to be the #1 leader in storage virtualization solutions. The Storwize family consists of the SAN Volume Controller (SVC), Storwize V7000, Storwize V7000 Unified, Flex System V7000, Storwize V5000, Storwize V3700 and V3500.
SAN Volume Controller 2145-DH8
The new 2145-DH8 model is a complete repackaging of this popular storage system. The previous model, the 2145-CG8, was 1U-high x86 server per node, and each node required a separate 1U-high UPS to provide battery protection for its cache. Nobody liked this. The new 2145-DH8 instead is a 2U-high node with two hot-swappable batteries, eliminating the need for UPS altogether. Thus, an SVC node-pair using the 2145-DH8 models takes up the same 4U space, but with fewer cables. The SVC can now also support standard office 110/240 voltage sources.
The new model sports an 8-core processor with 32GB RAM. Since these are 2-socket servers, IBM offers that option to add a second 8-core processor and additional 32GB RAM to help boost Real-time Compression. Each node can have optionally one or two hardware-assisted compression cards which use the Intel QuickAssist chip to boost compression performance.
While the Real-time Compression was in fact, real-time, performed in-line to the read/write I/O process, at latency comparable to uncompressed data for applications, the compression process on older models was entirely software-based, consuming some of the CPU resources, which lowered the maximum IOPS of the solution. With the added cores, added RAM, and hardware-assisted compression chips, IBM resolves that concern. In fact, the new 2145-DH8 with compression can provide more IOPS than an older 2145-CG8 without compression.
The previous model 2145-CG8 allowed you to put up to 4 small SSD drives in the node itself, which were treated the same as externally Flash drives for purposes of having a high-speed storage pool for select volumes, or automated sub-LUN tiering with Easy Tier. The new model 2145-DH8 allows you to attach up to 48 Solid State Drives (SSD) via 12Gb SAS cables. These are housed in the new 2U-high 24F enclosures that can offer up to 38.4 TB of Flash per SVC I/O group.
IBM also re-designed the host/device ports to use Hardware Interface Card (HIC) slots. In the 2145-CG8, you had four FCP ports, two 1GbE Ethernet ports, with options to add two 10GbE Ethernet ports or four additional FCP ports. If you had mostly an FCoE or iSCSI environment, you didn't need the FCP, and if you were mostly a FCP Storage Area Network (SAN) environment, then most of the Ethernet ports went unused. To solve this, the 2145-DH8 can allow you to have up to six HIC cards that are either FCP, Ethernet, or SAS. There are three 1GbE fixed Ethernet ports which can be used for iSCSI and administration.
If you have SVC today, you can upgrade non-disruptively by either swapping out your current SVC engines with the new 2145-DH8 engines, or you can add the new 2145-DH8 engines to your existing SVC cluster. Either way, there is no outage to your applications!
This is the next generation of the popular Storwize V7000. The previous generation had a 4-core processor and 8GB RAM per canister. The new model has an 8-core processor with 32GB of RAM per canister, with the option to double these to boost Real-time compression. There are two canisters per control enclosure, which gives you 64GB to 128GB of RAM per Storwize V7000 I/O group.
The new Storwize V7000 comes with one hardware-assisted compression chip on the mother board of each canister, with the option to add a second chip per canister.
Each canister offers three HIC slots, which can be used for the additional hardware-assist compression chip, FCP or Ethernet ports.
To accommodate these HIC slots, new canisters were needed. Instead of the flat wide style top and bottom, we now have taller, thinner canisters that sit side to side. This side-to-side design is similar to our existing Storwize V5000 and V3700 models.
The previous model could support up to 9 expansion enclosures per control enclosure. The Storwize V7000 can have up to 24 drives in its control enclosure, and now attach up to 20 expansion enclosures, which allows up to 504 drives per control enclosure, and up to a maximum of 1,056 drives per Storwize cluster.
If you have previous models of Storwize V7000, you can add the new Storwize V7000 into the same cluster, or virtualize the previous storage for migration purposes.
The new software applies new capabilities to both new generation hardware as well as the older models, so people with existing gear can benefit as well.
In prior releases, the sub-LUN automated tiering was limited to two levels: Flash and HDD. This lumped all 15K, 10K and 7200 RPM drives into a common HDD category. In the new v7.3.0 code, you can now have three levels: Flash, Enterprise HDD, and Nearline HDD, or two HDD levels: Enterprise and Nearline. The Enterprise level combines 15K and 10K RPM drives, similar to what is done on the IBM System Storage DS8000 disk systems.
The new code is also able balance your storage pools, and can be used with uniform or mixed storage pools to eliminate performance hot spots.
The new code has been enhanced to detect the hardware-assisted compression chip on the new SVC and Storwize V7000 models, and use those if available.
For the Storwize V3700 and V5000 models, the new code allows up to nine expansion enclosures per control enclosure. In the previous models, the V3700 allowed only four expansions, and the V6000 only six expansions per control enclosure. The V3700 can now support up to 240 drives, and the V5000 can support up to 480 drives.
IBM Storwize V7000 Unified File Module software v1.5
For Storwize V7000 Unified clients, there is new software for the File Modules that provide NFS, CIFS, FTP, HTTPS and SCP protocol capability. The new v1.5 code now adds NFS v4 and SMB 2.1 levels of support. Most NFS users are still on NFSv3, but about 20 percent of NFS users are using NFS v4 which offers stateful access. The SMB 2.1 for CIFS was introduced by Microsoft in Windows 7 and Windows Server 2008 R2.
Deterministic ID mapping allows you to map Windows userids to UNIX/Linux group and owner id numbers. In the past, the problem is that this mapping is different on each machine, so people often had to stand up a Windows System for Unix Services (SFU) server to provide consistent ID mapping. Now, with v1.5 code, you will no longer have to do this. The deterministic ID mapping will can now replicate the mapping to each machine without an SFU server.
Active Cloud Engine allows up to ten Storwize V7000 Unified to be connected across distance to form a single global name space. WAN caching, however, was restricted to a single site having write capabilities, while the others were read-only. In v1.5 release, IBM now supports multiple independent writers at different locations on the same fileset.
Security enhancements include multi-tenancy, configurable password policies, session policies, and hardened boot and SSH configurations. With NFS v3/v4, you can now use [Kerberos] for security.
Finally, I am please to see that we now have Cinder support for files on the Storwize V7000 Unified on the OpenStack Havana release that just came out last month. The OpenStack Cinder interface can assign LUNs to virtual machines, but the new Havana release allows NAS systems to dole out files that act as LUNs, such as OVA or VMDK files. The advantage is that these files can managed by Active Cloud Engine, cached locally across global name space, have policies place them on appropriate storage tiers, and inactive Virtual Machine images can be migrated to less expensive disk or tape.
I am still wiping the coffee off my computer screen, inadvertently sprayed when I took a sip while reading HDS' uber-blogger Hu Yoshida's post on storage virtualization and vendor lock-in.
HDS is a major vendor for disk storage virtualization, and Hu Yoshida has been around for a while, so I felt it was fair to disagree with some of the generalizations he made to set the record straight. He's been more careful ever since.
However, his latest post [The Greening of IT: Oxymoron or Journey to a New Reality] mentions an expert panel at SNW that includedMark O’Gara Vice President of Infrastructure Management at Highmark. I was not at the SNW conference last week in Orlando, so I will just give the excerpt from Hu's account of what happened:
"Later I had the opportunity to have lunch with Mark O’Gara. Mark is a West Point graduate so he takes a very disciplined approach to addressing the greening of IT. He emphasized the need for measurements and setting targets. When he started out he did an analysis of power consumption based on vendor specifications and came up with a number of 513 KW for his data center infrastructure....
The physical measurements showed that the biggest consumers of power were in order: Business Intelligence Servers, SAN Storage, Robotic tape Library, and Virtual tape servers....
Another surprise may be that tape libraries are such large consumers of power. Since tape is not spinning most of the time they should consume much less power than spinning disk - right? Apparently not if they are sitting in a robotic tape library with a lot of mechanical moving parts and tape drives that have to accelerate and decelerate at tremendous speeds. A Virtual Tape Library with de-duplication factor of 25:1 and large capacity disks may draw significantly less power than a robotic tape library for a given amount of capacity.
Obviously, I know better than to sip coffee whenever reading Hu's blog. I am down here in South America this week, the coffee is very hot and very delicious, so I am glad I didn't waste any on my laptop screen this time, especially reading that last sentence!
In that report, a 5-year comparison found that a repository based on SATA disk was 23 times more expensive overall, and consumed 290 times more energy, than a tape library based on LTO-4 tape technology. The analysts even considered a disk-based Virtual Tape Library (VTL). Focusing just on backups, at a 20:1 deduplication ratio, the VTL solution was still 5 times per expensive than the tape library. If you use the 25:1 ratio that Hu Yoshida mentions in his post above, that would still be 4 times more than a tape library.
I am not disputing Mark O'Gara's disciplined approach. It is possible that Highmark is using a poorly written backup program, taking full backups every day, to an older non-IBM tape library, in a manner that causes no end of activity to the poor tape robotics inside. But rather than changing over to a VTL, perhaps Mark might be better off investigating the use of IBM Tivoli Storage Manager, using progressive backup techniques, appropriate policies, parameters and settings, to a more energy-efficient IBM tape library.In well tuned backup workloads, the robotics are not very busy. The robot mounts the tape, and then the backup runs for a long time filling up that tape, all the meanwhile the robot is idle waiting for another request.
(Update: My apologies to Mark and his colleagues at Highmark. The above paragraph implied that Mark was using badproducts or configured them incorrectly, and was inappropriate. Mark, my full apology [here])
If you do decide to go with a Virtual Tape Library, for reasons other than energy consumption, doesn't it make sense to buy it from a vendor that understands tape systems, rather than buying it from one that focuses on disk systems? Tape system vendors like IBM, HP or Sun understand tape workloads as well as related backup and archive software, and can provide better guidance and recommendations based on years of experience. Asking advice abouttape systems, including Virtual Tape Libraries, from a disk vendor is like asking for advice on different types of bread from your butcher, or advice about various cuts of meat at the bakery.
The butchers and bakers might give you answers, but it may not be the best advice.
Last week, I presented IBM's strategic initiative, the IBM Information Infrastructure, which is part of IBM's New Enterprise Data Center vision. This week, I will try to get around to talking about some of theproducts that support those solutions.
I was going to set the record straight on a variety of misunderstandings, rumors or speculations, but I think most have been taken care of already. IBM blogger BarryW covered the fact that SVC now supports XIV storage systems, in his post[SVC and XIV],and addressed some of the FUD already. Here was my list:
Now that IBM has an IBM-branded model of XIV, IBM will discontinue (insert another product here)
I had seen speculation that XIV meant the demise of the N series, the DS8000 or IBM's partnership with LSI.However, the launch reminded people that IBM announced a new release of DS8000 features, new models of N series N6000,and the new DS5000 disk, so that squashes those rumors.
IBM XIV is a (insert tier level here) product
While there seems to be no industry-standard or agreement for what a tier-1, tier-2 or tier-3 disk system is, there seemed to be a lot of argument over what pigeon-hole category to put IBM XIV in. No question many people want tier-1 performance and functionality at tier-2 prices, and perhaps IBM XIV is a good step at giving them this. In some circles, tier-1 means support for System z mainframes. The XIV does not have traditional z/OS CKD volume support, but Linux on System z partitions or guests can attach to XIV via SAN Volume Controller (SVC), or through NFS protocol as part of the Scale-Out File Services (SoFS) implementation.
Whenever any radicalgame-changing technology comes along, competitors with last century's products and architectures want to frame the discussion that it is just yet another storage system. IBM plans to update its Disk Magic and otherplanning/modeling tools to help people determine which workloads would be a good fit with XIV.
IBM XIV lacks (insert missing feature here) in the current release
I am glad to see that the accusations that XIV had unprotected, unmirrored cache were retracted. XIV mirrors all writes in the cache of two separate modules, with ECC protection. XIV allows concurrent code loadfor bug fixes to the software. XIV offers many of the features that people enjoy in other disksystems, such as thin provisioning, writeable snapshots, remote disk mirroring, and so on.IBM XIV can be part of a bigger solution, either through SVC, SoFS or GMAS that provide thebusiness value customers are looking for.
IBM XIV uses (insert block mirroring here) and is not as efficient for capacity utilization
It is interesting that this came from a competitor that still recommends RAID-1 or RAID-10 for itsCLARiiON and DMX products.On the IBM XIV, each 1MB chunk is written on two different disks in different modules. When disks wereexpensive, how much usable space for a given set of HDD was worthy of argument. Today, we sell you abig black box, with 79TB usable, for (insert dollar figure here). For those who feel 79TB istoo big to swallow all at once, IBM offers "capacity on demand" pricing, where you can pay initially for as littleas 22TB, but get all the performance, usability, functionality and advanced availability of the full box.
IBM XIV consumes (insert number of Watts here) of energy
For every disk system, a portion of the energy is consumed by the number of hard disk drives (HDD) andthe remainder to UPS, power conversion, processors and cache memory consumption. Again, the XIV is a bigblack box, and you can compare the 8.4 KW of this high-performance, low-cost storage one-frame system with thewattage consumed by competitive two-frame (sometimes called two-bay) systems, if you are willing to take some trade-offs. To getcomparable performance and hot-spot avoidance, competitors may need to over-provision or use faster, energy-consuming FC drives, and offer additional software to monitor and re-balance workloads across RAID ranks.To get comparable availability, competitors may need to drop from RAID-5 down to either RAID-1 or RAID-6.To get comparable usability, competitors may need more storage infrastructure management software to hide theinherent complexity of their multi-RAID design.
Of course, if energy consumption is a major concern for you, XIV can be part of IBM's many blended disk-and-tapesolutions. When it comes to being green, you can't get any greener storage than tape! Blended disk-and-tapesolutions help get the best of both worlds.
Well, I am glad I could help set the record straight. Let me know what other products people you would like me to focus on next.