Hi Everyone !
It's HAK release time again !!
As part of our ongoing efforts to keep the IBM XIV Host Attachment Kit up to date and provide enhanced and new functionality, we are proud to announce the latest Host Attachment Kit version 1.9.0.
In this new version we have added support for several new platform versions:
Solaris 11, the recently released Red Hat Enterprise Linux 6.3 and the latest AIX 5.3, AIX 6.1 and AIX 7.1 Service Packs which introduce IBM XIV LUN 0 support.
But we did more than that. We have also enhanced the current HAK functionality by providing our UNIX & Linux users with manual pages accessible by using the 'man' command. Now you can access the documentation for each HAK command by executing 'man <HAK command>'.
In addition, in AIX OS, 'xiv_attach' is now capable of automatic discovery of connected XIV systems and host definition on the connected XIV, by utilizing the latest AIX 5.3, AIX 6.1 and AIX 7.1 SP, in which XIV LUN0 support was added. This aligns the XIV support in AIX OS with that of other supported OS-s. Moreover, LUN0 support also introduces a new HAK utility to AIX HAK users - 'xiv_syslist' , which you can read more about here
The log collection utility, 'xiv_diag', was enhanced and now can be executed in unattended mode by providing the command with the destination path for the compressed log collection package as a command line argument.
Finally, additional bugs and known issues were resolved, and you can read more about them in the Release Notes.
Follow this link
to download the installable or portable packages and access the release documentation.
Let's keep in touch!
The IBM Host Software Team
We are pleased to let you know about our recently launched IBM Storage Host
Software Solutions Information Center!
In this information center, or IC, you can find the relevant
documentation of all the solutions that we offer, including information of both
past versions and the latest versions.
Whether our host software solution is for XIV, DS8000,
Storwize, or any other IBM storage system – the release notes, user guide, or
installation guide are available on the IC in either PDF or HTML format
(whatever suits you best).
The solutions are categorized on the navigation tree under
four main categories: business continuity, management, host connectivity, and
virtualization. Keep in mind, however, that some solutions could belong in more
than one category. For example, a solution such as IBM Storage Management
Console for VMware vCenter is placed under the virtualization category, but it may
also be regarded as a powerful management solution. For another example, our
XIV and SVC adapters for VMware vCenter Site Recovery Manager, also placed under
virtualization, may also be regarded as business continuity solutions.
In any case, we hope that the organization of our solutions
on the IC makes sense to you, and that the information is helpful. If not,
please let us know! You can use the online
form that is available on the IC.
Each solution has its own welcome page from which you can have
quick access to the information of the available versions. The PDF publications
are available on the Publications page of each solution.
If you'd like to see our list of solutions per independent
software vendor (ISV), check out the Solutions
by ISV page. Alternatively, to see
which solutions are available for a specific IBM storage system, check out the Solutions
by storage system page.
And, of course, the IC is regularly being updated and
improved. You can always check what's new on the IC by visiting the What's
Lastly, we would like to thank our Information Development
team for making it happen.
The HSG Team
変更: 日付 、変更者 ZivKalmanovich
It's raining new releases here at IBM HSG, the latest software released from our team is the IBM XIV HAK v2.1.0.
The HAK is already a well known, widely used toolkit, therefore in this post we will focus on what's new in this latest release, and what will you gain by installing or upgrading to this version.
The first feature to note is the added support for version 11.3.0 of XIV microcode and more importantly for the Online Volume Migration (OLVM) feature. Now the "good old" xiv_devlist utility also presents the OLVM state of each and every volume exposed to the server, providing the host and storage administrators an easily accessible tool to stay updated with the migration state of the volumes under their responsibility, without the need to access the XIV Management GUI.
In addition, the recently introduced host diagnostic utility, the XIV Host Profiler , can now be defined as a scheduled task right from the Host Attachment Kit Wizard - xiv_attach. No need to remember to set it separately, the user will be asked during host configuration if a task should be scheduled to run the utility periodically.
We've also improved the xiv_devlist and xiv_syslist commands' CSV file format output utilities. From this release, by adding the --no-headers argument, the column headers will be omitted from the generated CSV file.
On top of the above-mentioned features and enhancements several stability issues were also fixed. The detailed list of those issues can be found in the Release Notes document coupled with the software package.
To download the IBM XIV Host Attachment Kit v2.1.0 and the related documentation , please visit IBM Fix Central. You will need an IBM ID to download the files.
The IBM Host Software Group
In this blog we'll try to provide you with the latest news from our XIV Host Software team.
We'll focus on the following products, which we develop for XIV Storage System customers:
- IBM XIV Host Attachment Kit
- IBM Storage Management Console for VMware vCenter
- IBM Storage Adapter for VMware vCenter Site Recovery Manager
- IBM Storage Enabler for Windows Failover Clustering
More info to follow!
Once again, we are proud to announce the release of the latest IBM XIV Host Attachment Kit 1.10.0.
The main feature of this release is Windows Server 2012 support. From this version onward, HAK is fully compatible with your new & shiny installation of Windows Server 2012. Go ahead and take it for a spin!
As part of our ongoing efforts to improve ease of use, we have translated the Windows Installer of HAK to Japanese as well, for the benefit of our Japanese speaking users. More languages to follow.
In addition to the above, we have also resolved several bugs and known issues from previous versions, including among others:
- Increased reliability in regard to volume size reporting in xiv_devlist
- Improved stability during the configuration phase of iSCSI connections on Solaris
- Path counts are reported more accurately in xiv_devlist on HP-UX
- We have resolved a known issue in xiv_syslist on HP-UX, regarding XIV System modules and ports connected to the host
- xiv_diag now runs more smoothly on Red Hat Enterprise Linux and Suse Linux Enterprise Server distributions
Of course that's not all - You may read more about these improvements as well as the rest of the enhancements and fixes in the Release Notes.
We hope you will enjoy this new release of the Host Attachment Kit, at least as much as we enjoyed developing it!
Follow this link to download the installable or portable packages and access the release documentation.
If you have comments, questions or requests, please write to us in the comments section below. We'd love to hear from you.
The IBM Host Software Team
The XIV Host Software team is happy to announce the 2011Q4 release of the XIV Host Attachment Kit, version 1.7.1.
Note that this is mostly a maintenance release with a couple of improvements. Upgrade is recommended but not mandatory. Go ahead and take HAK for a spin
and tell us what you think in the comments below. In the provided link, you can get HAK 1.7.1 for all supported platforms, Host Attachment Guide, and platform-specific Release Notes.
We recommend checking out the full list of changes and known issues for a specific platform in the corresponding Host Attachment Kit 1.7.1 Release Notes, available in the link above.
- Overall quality improvement, focused on Windows and Linux platforms: we've fixed over 40 bugs and implemented over 20 improvements.
- Provide detailed information the configuration steps HAK performs on the hosts, as we're aware that the host admins would really like to know that.
- xiv_attach now presents a clear list of the configuration steps.
- Added the "--verbose" flag to HAK tools. e.g. xiv_attach --verbose notifies about the changes HAK is about to perform.
- Host Attachment Guide's appendix A documents the configuration actions.
- Improved Windows KB installation, and clarified Windows KB requirements in the Release Notes
- Improved Windows installer and portable HAK packages
- Added support for Linux RHEL 5.7, 6.1 and 6.2.
- Improved Non-English locale support
And we didn't stop there...
We've invested a lot in internal test and development improvements. Most notably we've increased the automated test coverage and improved our automated build environment. This allows us to provide you with a better tested, higher quality product.
Got comments? we'd like to hear them!
- The XIV Host Software team
We are happy to announce our newest edition of the IBM XIV Host Attachment Kit, version 1.8.0. This release includes a new utility and support for new operating system versions, as well as several bug fixes and code infrastructure improvements. And now, let's dive into the details:
Starting with our cool new utility, called "xiv_syslist"... This new tool in the HAK will provide great assitance to host and storage administrators, by exposing useful storage array details from the server/host point of view. What kind of details? Without turning this post into a User Guide, the list of storage array details includes (for each array connected to the host): Array name, Array Serial, Management IPs, Connected Modules & Ports, Connectivity Types, Host Name Defined and Host Ports Definition State. The output can be formatted as xml or csv, as well as regular text output.The "xiv_syslist" utility is available on all platforms supported by the HAK.
Here is a screenshot, for first impression:
In addition we have broadened our list of supported OS versions and now it also includes: SLES 11 SP2, RHEL 5.8, Solaris 10 u10, AIX 7.1 TL1 and AIX 6.1 TL7.
We could not finish without mentioning the issues that were fixed in this version. While several minor issues have been fixed, the most encompassing one is an infrastructure revamp for the "xiv_devlist" utility, that has fixed many issues in the utility on all the supported platforms.
Now if this sounds good to you, here is the download link from IBM Fix Central
. Here you can find the IBM XIV Host Attachment Guide and the HAK Release Notes for each of the platforms.
We would love to hear from you, please leave your questions and comments below.
Happy Easter and Passover Holidays!
The IBM XIV Host Software team
It's been a while, but now we're back with our brand new IBM XIV Host Attachment Kit 2.0.0!
You probably noticed that we made the jump to version 2.0.0, and for a very good reason: We have an exciting new feature we've been developing for the last 6 months - xiv_host_profiler.
xiv_host_profiler introduces a new approach in the way we provide support to hosts connected to XIV systems. The utility gathers information about your host's configuration, analyzes it against a set of best-practice rules, and enables pre-emptive identification of storage connectivity problems. And this is exactly why we recommend running it on a regular basis.
This feature is also tightly integrated into our latest XIV System release 11.2. By default, when using xiv_host_profiler, the collected information gets uploaded to your XIV System for further analysis. This ability will assist our technicians to ensure your hosts' health before commencing XIV System upgrades or other procedures.
For privacy reasons, the information collected by xiv_host_profiler is only related to your host's storage connectivity status - items such as the host's HBA model, installed OS version and the configuration state of the multi-path framework.
After collecting the information, xiv_host_profiler is also able to analyze it against a bundled set of rules:
The rules against which we analyze the host's configuration will be updated regularly and can be downloaded from Fix Central
As mentioned before, it's best to run xiv_host_profiler at least once a week (in order to keep the data as up-to-date as possible). We provide an easy way to do so - simply run 'xiv_host_profiler --create-scheduled-task'.
As usual, you can read more about xiv_host_profiler (and other HAK utilities) in the Host Attachment Guide and Release Notes, as well as in the man pages included in the HAK package (how? simply run 'man xiv_host_profiler').
We believe HAK 2.0.0 and the included xiv_host_profiler will further improve on the way we support our storage systems and the hosts connected to them. We'd love to hear more from you about your needs and expectations in the comments.
In the meantime, you can download yourself a copy of the Host Attachment Kit for your favorite host's operating system, right here
The IBM Host Software Team
We're pleased to announce the release of the new IBM DS8000 Storage Replication Adapter version - 2.3.1. As you know, IBM DS8000 Storage Replication Adapter is a software add-on that integrates with VMware vCenter Site Recovery Manager (SRM) solution. It enables SRM to perform failovers together with IBM DS8000 storage systems.
This release brings the following new features:
- Adding support for the Extent Space Efficient (ESE) volumes, offering customers an option of producing an ESE volume when SRA creates flash copies.
- Removing the GM Flashcopy on the source site after successful re-protect. This prevents consumption of the pool capacity at the source site and improves overall system efficiency.
In addition, version 2.3.1 introduces support of the all-new member of the DS8000 family, DS8880 (v.8.0), enhancing its industry-leading disaster recovery capabilities.
変更: 日付 、変更者 DmitriyIsayev
IBM Spectrum Control Base Edition continues its evolution with a new version - 2.2.0. This release brings support for VMware VASA 2.0 without virtual volumes for DS8870 7.5.x (using patch DS8870_REST_API_7.7.51.xx.zip) and adds support for IBM Spectrum Accelerate version 11.5.1.x.
Additional changes include ability to manage storage resources directly from the pool list per storage system or storage service, using the Spectrum Control Base GUI. Also, starting from version 2.2.0, DS8870 storage systems make use of the RESTful API client to simplify the Spectrum Control upgrade and installation procedures, eliminating the need for previously used JRE extension bin files.
In general, IBM Spectrum Control Base Edition became a more robust, use-friendly and fault-tolerant solution for managing multiple IBM storage platforms.
IBM Spectrum Control Base Edition has been upgraded to a new version - 2.2.1. This release replaces the previous version (2.2.0). It introduces support for the VMware virtual volume (VVols) and Storage Policy Based Management (SPBM) technologies for the storage systems that run the IBM Spectrum Virtualize software with microcode version 7.6.0. These are:
- Storwize Family
- FlashSystem V9000
Additional changes include support for new data encryption method used by the Spectrum Virtualize software and ability for a storage resource attached to a VVol-enabled service to use other storage resources for VVol snapshots if it has reached its capacity.
A new milestone for IBM Spectrum Control Base Edition - version 3.0.0. This release brings support for the newest IBM's all-flash storage offerings: ultra-fast IBM FlashSystem A9000 and IBM FlashSystem A9000R. In addition, the web management interface of the package has been enhanced and improved to support the abstracted storage provisioning method. This release can be installed on RHEL 7.0–7.2.
In general, IBM Spectrum Control Base Edition became a more robust, user-friendly and safe solution for managing multiple IBM storage platforms.
変更: 日付 、変更者 Lihi Tikolsky
We've just released the IBM Storage Driver for OpenStack v.1.3.0, get it
now while it's hot from the oven!
IBM Storage Driver for OpenStack v1.3.0 package now includes:
* OpenStack Havana Support (Including Volume migration)
* IBM DS8000 Storage System in addition to the IBM XIV Storage System
* In addition to Ubuntu 12.04 x64, we now also support RHEL 6.4 x64
* The driver package now includes a script for creating OpenStack Cinder Volume types. Read about Openstack Cinder volume types here
Lets look at an example of the Volume types script we mentioned:
Assuming you have the following two backends configured in your cinder.conf file:
You can now run the 'create_volume_types.sh' script, to automatically create volume types to point to these backends.
After running this script, you can see your automatically created Volume types by running:
This is it!, your volume types are set and you can now use them when creating volumes:
#cinder create --volume-type IBM-XIV_hostdev31f.xiv.ibm.com_vwc_iscsi --display-name vol_hostdev31f 5
For further details, the software and related documentation can be downloaded from IBM Fix Central
The IBM Host Software Group
変更: 日付 、変更者 ZivKalmanovich
We have just released the IBM Storage Driver for OpenStack v1.2.0 and would like to share some of the more important features in this release.
The IBM Storage Driver for OpenStack is a software component that integrates with the OpenStack cloud environment and enables utilization of storage resources provided by the IBM XIV Storage System.
So what's new in our latest release?
Support for the OpenStack Grizzly release, which adds support for multiple storage backends on a single Cinder node. During the installation of the IBM Storage Driver for OpenStack v.1.2.0 on the Cinder node, the installation wizard will enable the configuration of multiple XIV storage backends, may it be two or more separate XIV systems or storage pools on the same XIV system.
Our Storage Driver now supports Fibre Channel (FC) storage connectivity to the compute node, in addition to the already supported iSCSI protocol.
To ease the installation and setup process of the new IBM Storage driver, we have enhanced the unattended installation of the IBM Storage Driver for Open Stack with the option to use a pre-configured ini file which includes the parameters of all the storage backends to be configured during the installation process.
In addition we introduced several fixes and code stability improvements.
The software and the related documentation can be downloaded from IBM Fix Central
The IBM HSG Team
In this post we would like to introduce the latest version
of the IBM Storage Driver for OpenStack, which we released on January 31st,
If by any chance you are unfamiliar with OpenStack, check
out the official OpenStack project website at: www.openstack.org
To put in a few words, OpenStack is an open-source software platform
for building private and public cloud environments. The IBM driver is a
software component that enables storage provisioning of the IBM XIV Storage Systems in OpenStack
The latest IBM driver version was preceded by an earlier one
(1.1.0), which enabled basic storage provisioning operations, such as volume
creation and deletion from OpenStack Cinder Node, and volume attachment to
The new release (1.1.1) further enhances the integration
between OpenStack and IBM XIV Storage System by adding support for XIV
volume snapshot functions.
For example, let's look at the following OpenStack Web UI management page:
In this example, if you want to create a snapshot of ‘vol1’ on
IBM XIV Storage System, you can use the ‘Create Snapshot’ action using either
OpenStack CLI or Web UI.
Here is your created snapshot, as can be viewed from the
Similarly, you can use OpenStack's ‘Create volume from
snapshot’ action to create a volume based on an existing snapshot.
An additional ease-of-use enhancement in version 1.1.1 is
the new unattended installation option, allowing no user interaction during the
installation, perfect for automating the installation process. You can use the following command format to install the IBM driver
in an unattended mode:
./install.sh –s –a <xiv_address> –u <username> –p <password>
The IBM Storage Driver for OpenStack can be downloaded here along with the Installation Guide and Release Notes.
Whenever you choose to integrate your IBM XIV Storage System with an
OpenStack cloud environment, our driver is available to help you achieve this
goal. We are happy to provide this newer version that further facilitates and
enhances the utilization of your XIV storage resources and capabilities in your
As always, you are welcome to share your thoughts with us.
- The IBM Storage Host Software
変更: 日付 、変更者 DmitriyIsayev
We are proud to announce that the IBM Storage Driver for OpenStack has been recently upgraded to a new version - 1.6.0. This version brings support for OpenStack Liberty release, as well as for DS8870 microcode version 7.5 SP3 and DS8880 version 8.01. In addition, this release introduces the XIV and Spectrum Accelerate support for the OpenStack consistency groups. It also brings in the RESTful API that replaced the Java-based ESSNI driver in DS8000 storage systems.
We have just made the latest version of IBM Storage Enabler for Windows Fail-over Clustering publicly available on IBM Fix Central
I would like to highlight some of the new features and improvements introduced in version 1.1.0:
- Security-wise, the credentials for XIV systems utilized by the cluster are now stored in a secured keyring, as opposed to the plain-text registry keys in the previous versions
- On the same note, from now on, you can store separate sets of credentials for each XIV system the cluster node is exposed to (upon upgrades, the registry stored single set credentials will be automatically stored in the encrypted keyring for each storage system)
- Additional CLI commands were added for eased configurability, such as, the registry key controlling the forced-fail-over policy (previously known as the 'red-button') that now can be set from the command line directly
- Verbosity was significantly enhanced, the '--install', '--uninstall' , '--deploy' commands now report every action performed to the console for better transparency
- The '--report' command output has been enriched with additional information regarding the mirror status of the XIV volumes and more
- Added Support for Windows Server 2012 Fail-over Clustering
- The product code underwent major improvements to make the it both more stable and efficient
In addition several major issues were resolved, such as those related to deployments where XIV disks resided in the 'Available Storage' cluster group and issues related to XIV Mirror resource behavior upon Cluster Service failure.
The new version of the IBM Storage Enabler for Windows Fail-over Clustering and the related documentation can be found here
Happy Clustering !
The IBM Host Software Group
We’ve recently released a new version of the Storage Enabler for Windows Failover Clustering. As you may know, it is a software agent that runs as a Microsoft Windows Server service on two geographically dispersed cluster nodes, providing failover automation for IBM XIV storage provisioning on these nodes, and enabling deployment of these nodes in a geo-cluster configuration.
The new version, 1.2.0, is mainly a maintenance release that resolves some previous limitations and provides support for the new IBM XIV and Microsoft Windows Server versions that have been released since version 1.1.0.
So, what's new in version 1.2.0? Here are the main things:
Support for Microsoft Windows 2012 R2
Support for XIV microcode versions 11.2, 11.3 and 11.4
Support for post-migrated Hyper-Scale Mobility volumes (supported in XIV microcode version 11.3 or later)
The IBM Hyper-Scale Mobility feature is used for online migration of volumes from one XIV storage system to another (for more detailed information, see "IBM XIV Storage System: IBM Hyper-Scale Mobility Overview and Usage" here: http://www.redbooks.ibm.com/abstracts/redp5007.html
An important note to make is that previous IBM Storage Enabler versions (1.1.0 or earlier) could not be used to protect volumes that have been migrated through the Hyper-Scale Mobility feature. In such cases, you could no longer use the IBM Storage Enabler with these volumes.
Now, version 1.2.0 of the IBM Storage Enabler resolves this limitation by allowing protection after the final migration state (after performing ‘End Proxy’). Starting from this version, the IBM Storage Enabler can be reconfigured with the migrated volume and resume its protection in just a few steps.
Here is what you will need to do before the protection of the IBM Storage Enabler can be resumed on the migrated volume:
First, upgrade the IBM Storage Enabler on all the cluster nodes to version 1.2.0. Then, remove from the cluster any XIV volume that you want to migrate with Hyper-Scale Mobility. Once removed from the cluster, you can start the migration of these volumes.
When the migration process is complete, ensure that the original XIV proxy volume (which was migrated) is removed from the original XIV storage system. Also ensure that a mirror relationship between the source and XIV destination volumes exists.
You can then add the migrated XIV volumes back to the MSCS cluster.
Finally, run the following commands to add the XIV mirror resource dependency to the newly added (migrated) volumes, and to verify the configuration:
That’s it. As always, we are happy to receive any feedback!
The IBM Storage Host Software Group (HSG)
We are proud to announce a new HAK release - version 2.6.0. Starting from this version, IBM XIV Host Attachment Kit has been renamed to IBM Storage Host Attachment Kit to indicate support for additional storage systems, including the newly announced all-flash IBM FlashSystem A9000 and IBM FlashSystem A9000R. In addition, this version introduces support for RHEL 7.2, SLES 12 and SLES 12 SP1. Moreover, selected Linux releases can now be run on IBM Power Systems servers, as detailed in the HAK release notes.
変更: 日付 、変更者 Lihi Tikolsky
If you happen to be using one or more IBM storage systems that are serving your VMware environment, we invite you to check out our recently released ’IBM Storage Integration Server’, a software solution that consolidates all your IBM storage usage through a single backend deployment.
You can add your IBM storage arrays into the scope of IBM Storage Integration Server in just one step, by using your storage user credentials as shown in the following example from the web-based management interface:
Once added, the arrays would be available to all supported solutions, without having to re-add each storage array separately for each solution or for any future supported solution.
This single integration server reduces the amount of management traffic and shares the queried storage information with all the supported solutions. The first release, version 1.1.0, introduces support for ‘IBM Storage Enhancements for VMware vSphere Web Client’ and for ‘IBM Storage Provider for VMware VASA’.
‘IBM Storage Enhancements for vSphere Web Client’ enables native visibility and provisioning of IBM storage volumes (LUNs) within VMware vSphere Web Client. These enhancements bring the value of the already known and acclaimed IBM Storage vCenter plug-in, formally known as ‘IBM Storage Management Console for VMware vCenter’, to the new web-based VMware vSphere Web Client, which allows the integration of multiple vCenter servers instead of one.
VMware administrators who were previously daunted by the thought of the complex task of connecting and utilizing storage resources through vSphere Web Client – can now be much more relaxed with the ability to easily create and manage storage volumes in delegated storage pools, which were attached by the storage administrators on the IBM Storage Integration Server side.
‘IBM Storage Provider for VMware VASA’, previously a standalone plug-in, is now a feature of the IBM Storage Integration Server, adding the following enhancements:
· Supports the IBM Storwize family in addition to the existing IBM XIV support.
· Storage capabilities are automatically defined and assigned, eliminating the need for manual definition and assignment.
That’s about it, for now J
More to come soon!
You can download the IBM Storage Integration Server software package and the related documentation from the IBM Fix Central.
You can also view the online documentation at our information center.
As always, we would be happy to have your comments and thoughts.
The IBM Storage Host Software Group (HSG)
変更: 日付 、変更者 ZivKalmanovich
A few days ago we have a released a new version of our VASA Provider for the XIV Storage System.
For those unfamiliar with VMware VASA or with the previous version of IBM Storage Provider for VMware VASA , here is some background:
VASA stands for vStorage API for Storage Awareness, and it is an API specified by VMware and implemented by storage vendors to standardize communication between the various storage systems and the vCenter Server. The Storage Provider is a web server that handles requests from the vCenter Server in which it is registered.
The IBM Storage Provider provides a standard interface for any connected VMware vCenter Server using VMware APIs for Storage Awareness (VASA), delivering information about XIV storage topology, capabilities and state, as well as storage events and alerts to vCenter Server in real time. VMware administrators can view this information on the vSphere Client management station, and can configure storage-related operations accordingly
For example an IBM VASA Provider registered in a VMware vCenter will provide the following information in the "Storage View" tab of the vShpere Client (both web and c#)
Screenshot from vShpere Client 5.1
In version 1.1.5 several major enhancements and changes were introduced:
This version runs only on Red Hat Enterprise Linux 6.3 x64, as opposed to the previous one that ran on Windows Server platform. The provider and the required software packages are distributed in standard Linux RPM packages.
We also added support for Storage Capabilities, so now VMware administrators can assign Storage Capabilities to volumes and use that information when creating or working with Datastores and VMs.
The VASA Provider management CLI has been streamlined and redesigned, IBM VASA Provider Version 1.1.5 introduces the following new CLI management utilities:
ibmvp_storage_credentials – For setting, removing, and listing XIV access credentials.
ibmvp_admin_commands – For adding, removing, and listing IBM Storage Integration Server users.
ibmvp_storage_array – For adding, removing, and listing connected XIV storage systems.
ibmvp_capabilities – For defining storage capabilities.
ibmvp_volume – For listing the available storage volumes and assigning storage capabilities to these volumes.
ibmvp_configuration – For backing up or restoring a specific configuration of
The IBM Storage Provider for VMware v1.1.5 and the associated documentation can be downloaded from IBM Support Fix Central here (You'll need an IBM ID to download the files).
Your comments are always welcome,
IBM HSG Team
A new version of IBM Storage Support for Microsoft Volume Shadow Copy Service and Virtual Disk Service has been released. This is version 4.11.0, which introduces support for the following storage system microcodes:
- Storwize Family, SVC and FlashSystem V9000, ver. 7.6.0
- DS8800, ver. 8.0
Also, version 4.11.0 adds support for temporary (non-persistent) read/write access to a snapshot.
A new version of the IBM Storwize Family Storage Replication Adapter is here. It's version 3.2.0, which adds support for the local HyperSwap for IBM SVC and Storwize systems, running IBM Spectrum Virtualize software. This new topology is used with VMware vSphere to enable transparent VMware vMotion migration and automatic VMware HA failover of virtualized workloads between physical data centers. This update:
- Introduces application consistency, maintaining a useful DR image (with RPO > 0), even in the case of a rolling disaster (a storage failure before an inter-site link or replication is established).
- Ensures replication between four nodes for greater resiliency in the case of a site failure.
It's been 4 months since the release of the IBM XIV HAK 2.1.0 and we're back with a new release - IBM XIV HAK 2.2.0.
So what's new in this release? We won't bother you with all the changes and fixes - you can find the detailed list in the Release Notes document coupled with the software package. We would however like to point out that the new release supports a new operating system - Microsoft Windows Server 2012 R2 - an important step by itself. But the main feature of this release is related to xiv_host_profiler and the way 'analyze' operates.
Since the addition of xiv_host_profiler utility in the HAK 2.0.0 release, we see growing interest in this application. Administrators want to know that the system they are working on is configured right and how to improve their settings. Makes sense, doesn't it?
The problem was that the analysis was based on the latest microcode released, and this is not the common situation in the field. Following the famous "if it ain't broken don't fix it" approach, upgrading the storage microcode is not done as frequent as we'd like it to happen. So for example, although a microcode version 11.1.x is used, the administrator would get the analysis results of 11.2.0 (HAK 2.0.0) or 11.3.0 (HAK 2.1.0) which have different rules.
To solve this problem in the new HAK release we collect the microcode versions of the connected XIV storage and the analysis is based on these versions. So if your host is connected to 10.2.4 or to 11.2.0 or 11.3.0, you can expect different results. In the following example you can see the same host running against two different microcode versions with two different analysis results.
And what about testing your configuration against a different microcode version? For example, if you have an XIV system running microcode 11.2.0 and you want to upgrade to 11.4.0 - will your host configurations still be valid? So we added an option for the user to specify the microcode version he is interested in.
To download the IBM XIV Host Attachment Kit version 2.2.0 and the related documentation, please visit IBM Fix Central.You will need an IBM ID to download the files.
The IBM Host Software Group
変更: 日付 、変更者 Alon Marx
It's been a long 9 months since the release of the IBM XIV HAK 2.2.0 and we're back with a new exciting release - IBM XIV HAK 2.3.0 .
This release brings in a few new features, and most of them are responses for requests from our customers.
The first feature derives from issues in the field where rescan operation did not do what people expected. Although the rescan operation worked well and found new devices, in many cases there were leftovers from old mappings that were previously removed. A stale device is something that happens for various reasons like network issues where the issue is should be resolved in a short period of time. But when a stale device is left for a long time it becomes a maintenance issue, especially when there is an amount of such devices. These stale devices can cause a variety of problems, ranging from slower performance on the low end, to applications being stuck on the high end.
To solve these issues xiv_iscsi_admin and xiv_fc_admin have an additional option that complements rescan and cleans up stale devices. Now, you may ask yourself why did we add it as an option and not just always clean up stale devices. Well, stale devices are a sensitive issue. For example, let's assume your host has 2 paths to your XIV storage and one of them fails due to a temporary network issue. When the network issue is resolved, the device will be automatically up and running. So in such a case, removing the device would be a mistake. So the bottom line is that this calls for a human decision. This is a powerful option and as the saying goes "with great power comes great responsibility".
Example 1: Cleaning up a stale device
The next feature is also a response to customers needs. People using Veritas Dynamic Multi-Pathing (DMP) had issues running xiv_attach, as it always configured and initiated the native multipath framework. Two multipath frameworks on the same host is like having two managers not speaking to each other, each pulling in another direction.
To solve this issue we went over all our tools and made changes that enable them to work without using the native framework. in case of xiv_attach, if you have Veritas DMP installed on your system, you will be asked to choose between the multipath frameworks. If you are running any other utility you are required to add a --no-native-multipath flag to the utility. And what happens if you run the tools by mistake without the flag, will it ruin all your work? In case there Veritas DMP already in the system and the tools are run without this parameter, the utilities will issue a warning, but will not cause any damages.
Example 2: xiv_attach in presence of Veritas DMP
A third feature relates to the new release of XIV Microcode 11.5 and a feature we call Multi-Tenancy. Let's say you have two companies working on the same storage, each with it's own data that should never ever get to the other company. The storage can be divided into domains so that each is maintained by separate people, unaware of each others work. From the point of view of the storage administrator running xiv_attach or xiv_iscsi/fc_admin, he just uses his credentials to connect to the storage and everything behaves as expected. In case a user is able to see more than one domain (e.g. in case of domain per department) he is able to specify the domain the host should be using via a flag in the xiv_iscsi/fc_admin command line.
We should make it clear that support for XIV Microcode 11.5 also means that xiv_host_profiler and its rule file were updated.
We've added support for the major release of Redhat Enterprise Linux 7.0. And a bunch of other minor versions for Redhat and AIX. We made some nice changes in xiv_diag, xiv_syslist, and a variety of fixes that you can find in the release notes.
To download the IBM XIV Host Attachment Kit version 2.3.0 and the related documentation, please visit IBM Fix Central. You will need an IBM ID to download the files.
The IBM Host Software Group
変更: 日付 、変更者 DmitriyIsayev
We are proud to announce that the IBM XIV Host Attachment Kit has been recently upgraded to a new version - 2.5.0. This release brings support for XIV microcode version 11.6.x, IBM Spectrum Accelerate 11.5.1.x, and RHEL 7.1. In addition, this version introduces a hot feature - the host-side acceleration (HSA) for improved iSCSI communication between Spectrum Accelerate and a host.
The improvement is achieved by efficient mapping of I/O operations to modules that store the required data. In a nutshell, instead of sending data across all paths and letting the storage arrays decide on correct forwarding, the host sends data directly to the correct module. This leads to faster handling of data by the host, with improved response time and throughput.
Another change is a deprecation of the -L option of the xiv_iscsi_admin and xiv_fc_admin commands, reserving the ability to list the attached storage devices for the xiv_syslist -L command only.
A new version of the IBM XIV Provider for Microsoft Windows Volume Shadow Copy Service (VSS), version 2.8.0, joins the ranks of the IBM's cloud storage solutions that support the newly introduced all-flash IBM FlashSystem A9000 and IBM FlashSystem A9000R.
We worked hard and it finally happened! Our own IBM XIV Storage Replication Adapter (SRA), version 2.2.2 is fully certified to operate with the following releases of the VMware vCenter Site Recovery Manager: 5.5, 5.5 Update1, 5.8, 6.0 and 6.1. Although this version is considered a minor release, making the SRA work with all the latest SRM versions was a challenging goal, involving a battery of compatibility tests and closely tied cooperation between the IBM and VMware interoperability teams.
Details are in the VMware Compatibility Guide at https://ibm.biz/BdHuPj. The product documentation is available on IBM Knowledge Center at https://ibm.biz/BdHL7A.
Time to do some XIV mirroring :).
変更: 日付 、変更者 Alon Marx
Check out the new IBM Storage Driver for OpenStack, version 1.3.1.
So what’s new in this version? First, we’ve added support for RHEL 6.5. This operating system is used in Red Hat Enterprise Linux OpenStack Platform 4.0, and we are now in the process of certifying our new driver version for that platform. Second, following requests from customers, the driver now supports CHAP authentication over iSCSI connections, providing increased security.
So where does CHAP support fit in? You can choose to use CHAP authentication for your iSCSI connections (applicable only to XIV systems). The CHAP names and secrets are automatically generated and used per host thus enhancing the connection security.
If you’d like to learn more about it, check out the latest product documentation.
As always, your thoughts and comments are more than welcome, so if you have some, be sure to post them here!
The IBM Storage Host Software Group (HSG)
We are excited to announce release of IBM XIV SRA 2.1.0 that is compatible with VMware Site Recovery Manager 5.0.
- Support for VMware Site Recovery Manager 5.0.1 (and 5.0.0)
- Support for XIV GEN2 (microcode 10.2.X) and for XIV GEN3 (microcode 11.X).
About SRM 5.0:
Site Recovery Manager 5.0 includes three major additions to the workflow capabilities:
- Planned migration
About IBM XIV SRA 2.1.0 with VMware SRM 5.0:
The IBM XIV SRA extends SRM capabilities and allows it to seamlessly employ XIV replication and mirroring as part of the SRM comprehensive Disaster Recovery Planning (DRP) solution.
Using the IBM XIV SRA, VMware administrators can automate the failover of an XIV system at the primary SRM site to an XIV system at a recovery (secondary) SRM site. Immediately upon a failover, the ESX/ESXi servers at the secondary SRM site start using the replicated datastores on the mirrored volumes of the secondary XIV system.
That's great ! But where can I get It ?
It's already available at the VMware download page of SRM 5.0.1 (You can click on the "Show Details" link inside the "Components" section to reveal the list of SRA components with IBM XIV SRA included)
We would love to hear from you, please leave you questions and comments below.
IBM XIV Host Software team
変更: 日付 、変更者 DmitriyIsayev
We are happy to announce the release of an updated OpenStack Cinder driver for IBM Spectrum Virtualize, Storwize Family and FlashSystem V9000. This release complies with OpenStack Liberty specifications, emphasizing IBM's continuous commitment to making the cutting-edge OpenStack features available for IBM storage customers.
Another change is the enabling or disabling the fast format option during thick volume creation. As some volume operations are disabled until fast format is completed, the customer can now skip the fast format, when creating a thick volume. This makes the volume operational immediately after its creation.
Version 7.6 of IBM Spectrum Virtualize and Storwize Family will be supported after its release with no additional Cinder driver code change.
VMware administrator, provision new datastores for your applications yourself, using IBM Storage Enhancements for vSphere Web Client. Use abstracted storage services, provided by your storage administrator. The services are consistent with application requirements with extendable storage space and VVol support. IBM Storage Enhancements for vSphere Web Client come packaged with IBM Spectrum Control Base Edition, a nifty storage provisioning tool integrated with a variety of VMware solutions for automation, monitoring, orchestration and native support of VVols and VASA API. Check the solution overview on YouTube at https://youtu.be/tf-0LGABZK8.
To make this happen, IBM has teamed up with VMware, creating a better experience for administrators and end users. We are proud to be one of the first partners in VMware's Web Client Plug-in certification program.
Learn more about the VMware program here: http://vmw.re/1S2FF7B.
The new and improved OpenStack Cinder driver for IBM SVC, Storwize Family, and FlashSystem V9000 storage systems has been released! This release complies with the OpenStack Mitaka specifications, enabling IBM storage customers to fully utilize the cutting-edge OpenStack data storage enhancements.
The new features include:
- Support for multi-pool configuration within a single backend, solving the SSH limitation for Storwize Family products.
- Support for multiple management IP addresses, enabling a switch-over to the secondary IP, if the primary management IP fails.
Moreover, the new SVC and Storwize Family microcode version (7.7) will be supported at its release on June 1, 2016 without any driver code change.
Upgrade and enjoy!
The new version adds the
following enhancements for XIV users:
- Multiple volume creation in one single
operation: You can now create a few volumes together, instead of
creating each volume separately. You can see how it's done in the
example screenshots below, marked in a blue rectangle.
- Consistent volume names across the vSphere environment: In previous versions it was difficult to identify your volumes through VMware vSphere’s panels and
wizards due to the long-form name given to them. For example, this is what your Add
Storage wizard may have looked like:
But which Disk/LUN is the one I am looking for? Now when you create a volume, the name you provide is used as
the VMware’s Disk/LUN name in the vSphere environment, making it much
easier to view and manage.
For example, have a look at this ‘Creating 3 new volumes’
The volume names in VMware’s “Add Storage” wizard are identical, allowing simple volume identification!
- Simple multipath policy enforcement: This feature enforces the multipath policy either per storage array or per single volume, overriding VMware's defaults.
To set the policy for an entire XIV
storage system, go to the IBM Storage tab, right click on the relevant storage
system, choose Set Multipath Policy Enforcement, and then select the
From now on, for each
new volume you create on the storage system, the IBM storage plug-in enforces the chosen MP policy. Alternatively,
if you choose Disable Multipath Policy Enforcement, no MP policy is
such a case, VMware’s default MP policy for the storage array will be in effect).
Just note that this feature is
designed mostly for ESX/i versions 4.1 or earlier, where the default multipath policy set for the IBM XIV storage system was not
Round Robin (RR). In ESXi 5.0
or later, the default is RR.
These enhancements also apply to other IBM storage systems that the plug-in supports. In addition, version 3.0.0 introduces support for IBM Storwize V7000 Unified and IBM Scale Out Network Attached Storage (SONAS) as well as various bug fixes. You can check out the release notes for more
After you’ve heard all that, you can now go ahead and download the IBM Storage Management Console for VMware vCenter version 3.0.0 along with its documentation from the IBM Fix Central.
We’d love to hear your thoughts and comments, so please share them with us!
The IBM XIV Host Software team
Hi everyone, we have some great news for VMware SRM 4.1.x users.
The new IBM XIV Adapter for VMware vCenter SRM 4.1.x was released!
The IBM XIV Adapter version 4.1.0 adds support for XIV's GEN3 systems, and also fixes a couple of bugs.
So if you are using SRM 4.1 - you can now use it with both XIV GEN2 (microcode version 10.2.x) and XIV GEN3 (microcode version 11.x)!
You can download the IBM XIV adapter software package from the SRM 4.1.2 download page
(after clicking the View Downloads button, the IBM XIV adapter is listed on the page).
Feel free to ask us any question.
Lihi Tikolsky from the IBM XIV Host Software team.