Using the response time collection parameter in OMEGAMON II for CICS global data area module
bobby_g 060000DF9B Visits (3132)
How can I reduce the time period on the Response Time History panel?
The option or value you want to specify: Start time and end time for the Today’s Response Time display
The parameter to use: TIME_SLOT
The location in the file for the parameter: RESP
The time slots divide the previous 24 hours into a maximum of 48 user-defined intervals to display response time history.
The time slot parameters must be defined in the global data area module, as described in the OMEGAMON II for CICS Customization Guide.
Specifies the time slot definitions (1-48 slots) for the Today's Response Times display. It specifies the start time (first entry) and end time (second entry) of the slot. Enter the values in 24-hour clock format using this syntax:
where hh (hours) is a 2-digit number from 00 through 24 and mm (minutes) is a 2-digit number from 00 through 59.
At least one slot must be defined; if more than one slot is defined, the slots must be in ascending order. The ending time value on one slot can be the same as the beginning time value on the next slot, but overlaps are not allowed. (A shared minute is not an overlap.)