LPI exam prep
Intermediate Level Administration (LPIC-2) topic 212
This content is part # of # in the series: LPI exam prep
This content is part of the series:LPI exam prep
Stay tuned for additional content in this series.
Before you start
Learn what these tutorials can teach you and how you can get the most from them.
About this series
The Linux Professional Institute (LPI) certifies Linux system administrators at two levels: junior level (also called "certification level 1") and intermediate level (also called "certification level 2"). To attain certification level 1, you must pass exams 101 and 102; to attain certification level 2, you must pass exams 201 and 202.
developerWorks offers tutorials to help you prepare for each of the four exams. Each exam covers several topics, and each topic has a corresponding self-study tutorial on developerWorks. For LPI exam 202, the seven topics and corresponding developerWorks tutorials are:
|LPI exam 202 topic||developerWorks tutorial||Tutorial summary|
|Topic 205||LPI exam 202 prep (topic 205):|
|Learn how to configure a basic TCP/IP network, from the hardware layer (usually Ethernet, modem, ISDN, or 802.11) through the routing of network addresses.|
|Topic 206||LPI exam 202 prep (topic 206):|
Mail and news
|Learn how to use Linux as a mail server and as a news server. Learn about mail transport, local mail filtering, mailing list maintenance software, and server software for the NNTP protocol.|
|Topic 207||LPI exam 202 prep (topic 207):|
|Learn how to use Linux as a DNS server, chiefly using BIND. Learn how to perform a basic BIND configuration, manage DNS zones, and secure a DNS server.|
|Topic 208||LPI exam 202 prep (topic 208):|
|Learn how to install and configure the Apache Web server, and learn how to implement the Squid proxy server.|
|Topic 210||LPI exam 202 prep (topic 210):|
Network client management
|Learn how to configure a DHCP server, an NIS client and server, an LDAP server, and PAM authentication support. See detailed objectives below.|
|Topic 212|| LPI exam 202 prep (topic 212):|
|(This tutorial) Learn how to configure a router, secure FTP servers, configure SSH, and perform various other security administration tasks. See detailed objectives below.|
|Topic 214|| LPI exam 202 prep (topic 214):|
To start preparing for certification level 1, see the developerWorks tutorials for LPI exam 101. To prepare for the other exam in certification level 2, see the developerWorks tutorials for LPI exam 201. Read more about the entire set of developerWorks LPI tutorials.
The Linux Professional Institute does not endorse any third-party exam preparation material or techniques in particular. For details, please contact firstname.lastname@example.org.
About this tutorial
Welcome to "System security," the sixth of seven tutorials covering intermediate network administration on Linux. In this tutorial, you learn about a wide array of topics related to using Linux as a security-conscious network server. Such issues as routing, firewalls, and NAT translation (and the tools to manage them) are covered, as well as setting security policies for FTP and SSH. You also learn about general access control with tcpd, hosts.allow, and friends (revisiting the discussion in LPI exam 201 prep (topic 209): File and service sharing). Finally, you learn about some basic security monitoring tools, as well as where to find security resources.
As with the other tutorials in the developerWorks 201 and 202 series, this tutorial is intended to serve as a study guide and entry point for exam preparation, rather than complete documentation on the subject. Readers are encouraged to consult LPI's detailed objectives list and to supplement the information provided here with other material as needed.
This tutorial is organized according to the LPI objectives for this topic. Very roughly, expect more questions on the exam for objectives with higher weight.
|LPI exam objective||Objective weight||Objective summary|
Configuring a router
|Weight 2||Configure a system to perform network address translation (NAT, IP masquerading), and state its significance in protecting a network. This objective includes configuring port redirection, managing filter rules, and averting attacks.|
Securing FTP servers
|Weight 2||Configure an FTP server for anonymous downloads and uploads. This objective includes precautions to be taken if anonymous uploads are permitted and configuring user access.|
Secure shell (SSH)
|Weight 2||Configure an SSH daemon. This objective includes managing keys, configuring SSH for users, forwarding an application protocol over SSH, and managing the SSH login.|
|Weight 1||Configure tcpwrappers to allow connections to specified servers only from certain hosts or subnets.|
|Weight 3||Install and configure a secure authentication system; perform basic security auditing of source code; receive security alerts from various sources; audit servers for open e-mail relays and anonymous FTP servers; install, configure, and run intrusion detection systems; and apply security patches and bug fixes.|
To get the most from this tutorial, you should already have a basic knowledge of Linux and a working Linux system on which you can practice the commands covered in this tutorial.
As with most Linux tools, it is always useful to examine the manpages for any utilities discussed. Versions and switches might change between utility or kernel version or with different Linux distributions. For more in-depth information, the Linux Documentation Project has a variety of useful documents, especially its HOWTOs. Also, a variety of books on Linux system security have been published; I have found O'Reilly's TCP/IP Network Administration, by Craig Hunt to be quite helpful. See the Related topics section for links.
Configuring a router
About packet filtering
The Linux kernel includes the "netfilter" infrastructure, which enables you to filter network packages. Usually this capability is compiled into the base kernel, but a kernel module may
be needed. Either way, module loading should be seamless (for instance, running
iptables will load
iptables_filter.o if it needs it).
Packet filtering is controlled with the utility
iptables in modern Linux systems; older systems used
ipchains. Before that, it was
you can still use
ipchains in conjunction with recent kernels if backward compatibility is needed, you will almost always prefer the enhanced capabilities and
improved syntax in
iptables. That said, most of the concepts and switches in
iptables are compatible enhancements to
Depending on the exact scenario of filtering (firewall, NAT, etc.), filtering and address translation may occur either before or after routing itself. The same
tool is used in either case, but different rule sets ("chains") are used for the cases -- at base,
OUTPUT. However, filtering can also affect the
routing decision by filtering on the
FORWARD chain; this may lead to dropping packets rather than routing them.
As well as filtering with
iptables (or legacy
ipchains), the Linux kernel performs routing of IP packets it receives. Routing is a simpler process
than filtering, though the two are conceptually related.
During routing, a host simply looks at a destination IP address and decides whether it knows how deliver a packet directly to that address or whether a gateway is available that knows how to deliver to that address. If a host can neither deliver a packet itself nor knows what gateway to forward it to, the packet is dropped. However, typical configurations include a "default gateway" that handles every otherwise unspecified address.
Configuration and display of routing information is performed with the utility
route. However, routing may either be static or dynamic.
With static routing, delivery is determined by a routing table that is explicitly configured by invocations of the
route command and its
del commands. However, configuring dynamic routing using the
gated daemons that broadcast routing information to adjacent routing
daemons is often more useful.
routed daemon supports the Routing Information Protocol (RIP); the
gated daemon adds support for a number of other protocols -- and can use multiple
protocols at once -- such as:
- Routing Information Protocol Next Generation (RIPng)
- Exterior Gateway Protocol (EGP)
- Border Gateway Protocol (BGP) and BGP4+
- Defense Communications Network Local-Network Protocol (HELLO)
- Open Shortest Path First (OSPF)
- Intermediate System to Intermediate System (IS-IS)
- Internet Control Message Protocol (ICMP and ICMPv6)/Router Discovery
Let's look at a fairly typical static routing table:
Listing 1. Typical static routing table
% /sbin/route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 22.214.171.124 * 255.255.255.0 U 0 0 0 eth0 10.10.12.0 * 255.255.254.0 U 0 0 0 eth1 126.96.36.199 * 255.255.254.0 U 0 0 0 eth0 169.254.0.0 * 255.255.0.0 U 0 0 0 eth1 default ev1s-66-98-216- 0.0.0.0 UG 0 0 0 eth0
This means that addresses in the 66.98.217/24 and 66.98.216/23 ranges will be directly delivered over
eth0. Address ranges 10.10.12/23 and 169.254/16 will be delivered on
eth1. Anything left over will be sent to the gateway
ev1s-66-98-216-1.ev1servers.net (the name is cut off in the
route display; you could also
route -n to see that name was IP address 188.8.131.52). If you wanted to add a different gateway for some other address ranges, you might run something like this:
Listing 2. Adding new gateway for other address ranges
% route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.2.1 dev eth0
For a machine that serves as a gateway itself, you will generally want to run dynamic routing, using the
gated daemons, which may supplement a
smaller number of static routes. The
routed daemon is configured by the contents of /etc/gateways. The
gated daemon is more modern and has more capabilities
(as indicated); it is configured by /etc/gated.conf. Generally, if you use either of these, you will want to launch them in your startup scripts. You must not run both
gated on the same machine because results will be unpredictable and almost certainly undesirable.
Filtering with iptables
The Linux kernel stores a table of filter rules for IP packets that form a sort of state-machine. Sets of rules that are processed in sequence are known as "(firewall) chains." When one
chain meets a condition, one of the possible actions is to shift control to processing another chain as in a state-machine. Before you have added any rules or states, three chains are
INPUT chain is where a packet addressed to the host machine passes and
potentially from there to a local application process. The
FORWARD chain is where a packet addressed to a different machine passes, assuming forwarding is enabled and the
routing system knows how to forward that packet. A packet generated on the local host is sent into the
OUTPUT chain for filtering -- if it passes the filters in the
OUTPUT chain (or any linked chains), it is routed out over its network interface.
One action that a rule can take is to
DROP a packet; in that case, no further rule processing or state transition is taken for that packet. But if a packet is not dropped,
the next rule in a chain is examined to see if it matches the packet. In some cases, satisfaction of a rule will branch process to a different chain and its set of rules. Creation,
deletion, or modification of rules and of chains in which rules live is performed with the tool
iptables. In older Linux systems, the same function was done using
ipchains instead. The concepts behind both tools and even for the ancient
ipfwadm are similar, but
iptables syntax is discussed here.
A rule specifies a set of conditions that a packet might meet and what action to take if the packet does meet that condition. As mentioned, one common action is to
packets. For example, suppose you wanted (for some reason) to disable
ping on the loopback interface (the ICMP interface). You could make this happen with:
Listing 3. Disabling on the loopback interface
% iptables -A INPUT -s 127.0.0.1 -p icmp -j DROP
Of course, that is a silly rule and we probably want to remove it after we test it, like this:
Listing 4. DROPping the silly rule
% iptables -D INPUT -s 127.0.0.1 -p icmp -j DROP
Deleting a rule with the
-D option requires either exactly the same options as specified when it was added or specification by rule number (which you must
determine in the first place) like this:
Listing 5. Specifying rule number so deletion can work
% iptables -D INPUT 1
A more interesting rule might look at source and destination addresses in packets. For example, suppose that a problem remote network is trying to utilize services on a particular subnet of your network. You might block this on your gateway/firewall machine with:
Listing 6. Blocking the gateway/firewall machine
% iptables -A INPUT -s 66.98.216/24 -d 64.41.64/24 -j DROP
Doing this will stop anything from the
66.98.216.* IP block from communicating with anything in the local
64.41.64.* subnet. Of course, singling out a specific
IP block for blacklisting is fairly limited as protection. A more likely scenario might be to allow only a specific IP block to access a local subnet:
Listing 7. Letting a specific IP block access a local subnet
% iptables -A INPUT -s ! 66.98.216/24 -d 64.41.64/24 -j DROP
In this case, only the
66.98.216.* IP block can access the specified subnet. Moreover, you can use a symbolic name for an address and can specify a particular
protocol to be filtered. You can also select a specific network interface (like
eth0) to filter, but that is less commonly useful. For example, to let only a specific
remote network access a local Web server, you might use:
Listing 8. Letting a specific remote network address access a local Web server
% iptables -A INPUT -s ! example.com -d 184.108.40.206 -p TCP -sport 80 -j DROP
You can specify a number of other options with
iptables, including rate limits on the number of packets that will be allowed or filtering on TCP flags, for example. See the
iptables for more details.
You have seen the basics of adding rules to the automatic chains. But much of the configurability in
iptables comes with adding user-defined chains and branching to them if
patterns are matched. New chains are defined with the
-N option; you have already seen branching using the special target
ACCEPT is also a
special target with the obvious meaning. Also, special targets
QUEUE are available. The first means to stop processing a given chain and return to
its parent/caller. The
QUEUE handler lets you pass packets to a user-space process for further processing (which might be logging, modification of the packet, or more
elaborate filtering than
iptables supports). The simple example in Rusty Russell's "Linux 2.4 Packet Filtering HOWTO" is a good example of adding a user-defined chain:
Listing 9. Adding a user-defined chain
# Create chain to block new connections, except established locally % iptables -N block % iptables -A block -m state --state ESTABLISHED,RELATED -j ACCEPT % iptables -A block -m state --state NEW -i ! ppp0 -j ACCEPT % iptables -A block -j DROP # DROP everything else not ACCEPT'd # Jump to that chain from INPUT and FORWARD chains % iptables -A INPUT -j block % iptables -A FORWARD -j block
Notice that the
ACCEPTs in a limited class of cases, then the final rule
DROPs everything not previously
Once you have established some chains, whether adding rules to the automatic chains or adding user-defined chains, you may use the
-L option to view the current rules.
Network address translation vs. firewalls
The examples we have looked at are mostly in the class of firewall rules. But network address translation (NAT) is also configured by
Basically, NAT is a way of using connection tracking to masquerade packets coming from a local subnet address as the external WAN address before sending them out "over the wire" (on the
OUTPUT chain). The gateway/router that performs NAT needs to remember which local host connected to which remote host and reverse the address translation if packets arrive
back from the remote host.
From a filtering perspective though, you simply pretend that NAT does not exist. The rules you specify should simply use the "real" local addresses regardless of how NAT might
masquerade them to the outside world. Enabling masquerading, such as in basic NAT, just uses the below
iptables command. To use this you will need to make sure the kernel
module iptables_nat is loaded and also turn on IP forwarding:
Listing 10. Enabling the masquerade
% modprobe iptables_nat # Load the kernel module % iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE % echo 1 > /proc/sys/net/piv4/ip_forward # Turn on IP forwarding
This capability is called source NAT -- the address of the outgoing packet is modified. destination NAT (DNAT) also exists to enable port forwarding, load sharing, and transparent proxying. In those cases, incoming packets are modified to get to the relevant local host or subnet.
But most of the time when users or administrators talk about NAT, they mean source NAT. If you mean to configure destination NAT, you would specify
PREROUTING rather than
POSTROUTING. For DNAT, the packets are transformed before they are routed.
Securing FTP servers
Many different FTP servers are available for Linux, and different distributions offer different servers. Naturally, configuration of different servers varies, though most tend to follow similar configuration directives.
A popular FTP server is vsftpd (the Very Secure FTP daemon). ProFTP is also in wide use, as are wu-ftpd and ncftpd.
For many purposes, FTP is not really needed at all. For example, secure transfers for users who have accounts on a server machine can often be accomplished using
(secure copy), which relies on the underlying SSH installation, but otherwise mostly mimics the familiar
The configuration file for vsftpd is /etc/vsftpd.conf. Other FTP servers use similar files.
FTP configuration options
Here are a few options to keep in mind in /etc/vsftpd.conf (and probably in your server if you use a different one):
anonymous_enabled: Lets anonymous users log in using the usernames "anonymous" or "ftp".
anon_mkdir_write_enable: Lets anonymous users create directories (within world-writable parent directories).
anon_upload_enable: Lets anonymous users upload files.
anon_world_readable_only: "YES" by default; rarely a good idea to change it. Only lets anonymous FTP access world-readable files.
chroot_list_enable: Specifies a set of users (listed in /etc/vsftpd.chroot-list) in a "chroot jail" in their home directory upon login.
ssl_enable: Supports SSL-encrypted connections.
Read the manpages for your FTP server for more complete options. Generally, running an FTP server is as simple as tweaking a configuration file and running the server within your initialization scripts.
Secure shell (SSH)
Client and server
Most every Linux machine (as well as most other operating systems) should have a secure shell (SSH) client. Often, the OpenSSH version is used, but a variety of compatible SSH clients are sometimes used. While an SSH client is essential to connect to a host, the larger security issues arise in properly configuring an SSH server.
Since a client initiates a connection to a server, the client is actively choosing to trust the server. Just having an SSH client does not allow any kind of access into a machine; therefore, it does not expose vulnerabilities.
Configuring a server is also not particularly complex; the server daemon is designed to enable and enforce good security practices. But clearly it is a server that is sharing resources with clients based on requests from the clients the server decides to honor.
The SSH protocol has two versions, version 1 and version 2. In modern systems, using protocol version 2 is always preferred, but generally both clients and servers maintain backward compatibility with version 1 (unless this capability is disabled with configuration options). This lets you connect to increasingly uncommon version 1-only systems.
Somewhat different configuration files are used in version 1 and version 2 protocols. For protocol version 1, a client first creates an RSA key pair using ssh-keygen and stores the private key in $HOME/.ssh/identity and the public key in $HOME/.ssh/identity.pub. This same identity.pub should be appended to the remote $HOME/.ssh/authorized_keys files.
Obviously, there is a chicken-and-egg problem here: How can you copy a file to a remote system before you have access? Fortunately, SSH also supports a fallback authentication method of sending encrypted-on-the-wire passwords that are evaluated through the usual remote-system login tests (such as, the user account must exist, and the right password must be provided).
Protocol 2 supports both RSA and DSA keys, but RSA authentication is somewhat enhanced rather than identical to that in protocol 1. For protocol 2, private keys are stored in $HOME/.ssh/id_rsa and $HOME/.ssh/id_dsa. Protocol 2 also supports a number of extra confidentiality and integrity algorithms: AES, 3DES, Blowfish, CAST128, HMAC-MD5, HMAC-SHA1, and so on. The server can be configured as to preferred algorithms and order of fallbacks.
For general configuration options rather than key information, the client stores its keys in /etc/ssh/ssh_config (or if available, in /$HOME/.ssh/config). Client options can also be
configured with the
-o switch; a particularly common switch is the
-x to enable or disable X11 forwarding. If enabled, the X11 port is
tunneled through SSH to enable encrypted X11 connections.
scp also use similar port forwarding over SSH. For example, on the local machine I am working on, I can launch onto the local display an X11 application that
only exists remotely (on my local subnet in this case):
Listing 11. Launching a remote X11 application
$ which gedit # not on local system $ ssh -X email@example.com Password: Linux averatec 2.6.10-5-386 #1 Mon Oct 10 11:15:41 UTC 2005 i686 GNU/Linux No mail. Last login: Thu Feb 23 03:51:15 2006 from 192.168.2.101 dqm@averatec:~$ gedit &
Configuring the server
sshd daemon, specifically the OpenSSH version, enables secure encrypted communications between two untrusted hosts over an unsecured network. The base
server is normally started during initialization and listens for client connections forking a new daemon for each client connection. The forked daemons handle key exchange, encryption,
authentication, command execution, and data exchange.
As with the client tool, the
sshd server accepts a variety of options on the command line, but is normally configured by the file /etc/ssh/sshd_config. A number of other
configuration files are also used. For example, the access controls /etc/hosts.allow and /etc/hosts.deny are honored. Keys are stored in a similar fashion to the client side, in
/etc/ssh/ssh_host_key (protocol 1), /etc/ssh/ssh_host_dsa_key, /etc/ssh/ssh_host_rsa_key, and public keys in /etc/ssh/ssh_host_dsa_key.pub and friends. Also, as with the client, you
will use ssh-keygen to generate keys in the first place. See the manpage for
ssh-keygen for details on configuration files and copying generated keys
to appropriate files.
Many configuration options ar in /etc/ssh/sshd_config, and the default values are generally sensible (and sensibly secure). A few options are worth mentioning:
AllowTcpForwardingenables or disables port forwarding (tunneling), and is set to "YES" by default.
Cipherscontrols the list and order of encryption algorithms to be utilized.
AllowGroupsaccept wildcard patterns and allow you to control which users may even attempt further authentication.
DenyUsersact symmetrically as you would expect.
PermitRootLoginlets the root user SSH into a machine.
Protocollets you specify whether both protocol versions are accepted (and if not, which one is).
TCPKeepAliveis good to look at if you are losing SSH connections. A "keepalive" message is sent to check connections if this is enabled, but this can cause disconnection if transient errors occur in the route.
OpenSSH lets you create a tunnel to encapsulate another protocol within an encrypted SSH channel. This capability is enabled on the
sshd server by default, but could have
been disabled with command-line or configuration-file options. Assuming the capability is enabled, clients can easily emulate whatever port/protocol they wish to use for a connection.
For example, to create a tunnel for telnet:
Listing 12. Digging a tunnel for telnet
% ssh -2 -N -f -L 5023:localhost:23 firstname.lastname@example.org % telnet localhost 5023
Of course, this example is fairly pointless since an SSH command shell does the same thing as a telnet shell. But you could create a POP3, HTTP, SMTP, FTP, X11, or other protocol connection in this analogous manner. The basic concept is that a particular local host port acts as if it were the remote service with actual communication packets traveling over the SSH connection in encrypted form.
The options we used in the example are:
-2(use protocol 2),
-N(no command/tunnel only),
-f(SSH in background), and
-L,(describe tunnel as "localport:remotehost:remoteport").
The server (with username) is also specified.
What is "TCP_wrappers"?
The first thing to know about TCP_wrappers is that you should not use it, and it is not actively maintained. However, you might find the tcpd daemon from TCP_wrappers still running on a legacy system. In its time, this was a good application, but its functionality has been superceded by iptables and other tools. The general purpose of TCP_wrappers is to monitor and filter incoming requests for SYSTAT, FINGER, FTP, TELNET, RLOGIN, RSH, EXEC, TFTP, TALK, and other network services.
TCP_wrappers can be configured in a couple of ways. One is to substitute tcpd for other servers, providing arguments to pass control on to the particular server once tcpd has done its logging and filtering. Another method leaves the network daemons alone and modifies the inetd configuration file. For example, an entry such as:
tftp dgram udp wait root /usr/etc/tcpd in.tftpd -s /tftpboot
causes an incoming tftp request to run through the wrapper program (tcpd) with a process name
This objective is a hodgepodge of tasks -- all important for maintaining a secure network -- that I can't hope to do justice to in the space of this tutorial. I recommend spending time familiarizing yourself with the resources and tools listed in this section.
Web sites worth monitoring for security issues and patches include:
- Security focus news: The Security Focus Web site is one of the best sites for reporting and discussing security issues and specific vulnerabilities. The site includes several newsletters and alerts that you can subscribe to, as well as general columns and searchable bug reports.
- The Bugtraq mailing list: A full-disclosure moderated mailing list for the detailed discussion and announcement of computer security vulnerabilities: what they are, how to exploit them, and how to fix them.
- CERT Coordination Center: Hosted by Carnegie Mellon University, CERT has a range of advisories similar to the Security Focus site, with a bit more emphasis on tutorials and guidelines. Keeping track of multiple such sites is a good way to make sure you are current on all the security incidents affecting your OS, distribution, and specific tools or servers.
- Computer Incident Advisory Capability: CIAC Information Bulletins are distributed to the Department of Energy community to notify sites of computer security vulnerabilities and recommended actions. Similarly, CIAC Advisory Notices serve to alert sites to severe, time-critical vulnerabilities and solutions to be applied as soon as possible. CIAC Technical Bulletins cover technical security issues and analyses of a less time-sensitive nature.
- Information on securing open mail relays: A common vulnerability on systems with mail servers is failure to properly secure systems against malicious use by spammers and fraudulent mailers. The Open Relay Database provides tutorials on security-particular mail tools, open relay testing online tools, and a database of known problem servers that can be used to configure blacklists if site administrators so desire.
Tools to monitor security you might consider running include:
- Open Source Tripwire: A security and data integrity tool for monitoring and alerting on specific file changes.
scanlogd: A TCP port scan detection tool.
- Snort: Network intrusion prevention and detection using a rule-driven language; it uses signature-, protocol-, and anomaly-based inspection methods.
- Review the entire LPI exam prep tutorial series on developerWorks to learn Linux fundamentals and prepare for system administrator certification.
- TCP/IP Network Administration, Third Edition by Craig Hunt (O'Reilly, April 2002) is an excellent resource on Linux networking.
- For more in-depth information, the Linux Documentation Project has a variety of useful documents, especially its HOWTOs.
- With IBM trial software, available for download directly from developerWorks, build your next development project on Linux.