snIPL (simple network IPL) V.2.3.2
Back to snIPL Overview
2016-02-12 snIPL V.2.3.2 (Development stream)
This snIPL V.2.3.2 replaces all previous versions of snIPL.
If you download any software from this web site please be aware of the Warranty Disclaimer and Limitation of Liabilities.
This version supersedes all previous snIPL versions.
This version contains the following snIPL changes compared to snIPL V.2.3.1:
- IPL from CCW devices in subchannel set not equal to zero is allowed
- Endiannes conversion for the SMAPI API was fixed
The snIPL package contains two commands snipl and sncap.
snIPL - simple network IPL is a command line tool which serves as remote linux image control using basic Support Element (SE) functions or basic z/VM system management functions on one or more images. In particular, you can use snIPL to activate and deactivate virtual System z hardware.
With snIPL in LPAR mode you can load (IPL) an LPAR from a disk device, send commands to the operating system and retrieve operating system messages; or reset, activate, or deactivate an LPAR for I/O fencing purposes.
With snIPL in z/VM mode you can log on, reset, or log off a z/VM guest virtual machine.
snIPL can access the systems management API through a z/VM SMAPI request server available as of z/VM 5.3.
For z/VM 4.4 to z/VM 5.4 snIPL can access the systems management API through a VSMSERVE service machine on your z/VM system.
For setup information see README.snipl.
For further details see z/VM Systems Management Application Programming (SC24-6234) or z/VM V5R4.0 Systems Management Application Programming (SC24-6122-02) (or equivalent documentation from the z/VM website: http://www.vm.ibm.com)
snIPL for STONITH provides a STONITH plug-in. The STONITH implementation is part of Cluster Glue. Cluster Glue is a set of libraries, tools, and utilities for the Heartbeat and Pacemaker cluster stack of the High Availability Project. STONITH is usually used as part of this framework but can also be used independently.
For a general description of the STONITH technique see: http://linux-ha.org/wiki/STONITH
For a general description of Cluster Glue see: http://linux-ha.org/wiki/Cluster_Glue
The latest STONITH release can be downloaded from http://linux-ha.org/wiki/Downloads.
With snIPL for STONITH you can activate, deactivate, and reset Linux instances in LPAR mode or running as z/VM guests.
snIPL for Stonith supports the remote image operations activate, deactivate, and reset, exploiting basic System z Hardware Management Console (HMC) and Support Element (SE) functions for Linux running in an LPAR and of basic z/VM System Management Functions for Linux running under control of z/VM.
To compile and use the STONITH plugin lic_vps, you require two header files
/usr/include/pils/plugin.h and /usr/include/stonith/stonith.h.
You can find these header files in the Cluster Glue package of the Linux High Availability project
Note: As of version 2.1.3, snIPL supports STONITH version 2 only. Older snIPL versions support STONITH version 1 only.
sncap - simple network capacity management is a command line tool which allows to dynamically change Central Processing Complex (CPC) processing unit capacity from Linux environment using Support Element (SE) functions. In particular, you can use sncap to activate or deactivate temporary capacity records and query the temporary capacity record or CPC state information.
Note: sncap supports SE versions starting from 2.10.0.
snIPL in LPAR mode and sncap use the management application programming interfaces (APIs) provided by the HMC or SE. To communicate with the HMC/SE, snIPL and sncap establish an SNMP network connection to send and retrieve data. The HMC or SE has to be configured to allow the Linux instance where snIPL or sncap runs to access the API. If your network is firewall-controlled, udp-port 161 and tcp-port 3161 have to be opened between Linux system invoking snIPL or sncap and HMC/SE.
To compile and run snIPL in LPAR mode or sncap, they must be linked to the management library hwmcaapi.
In addition, further details can be found within the book 'System z Application Programming Interfaces' available for every System z generation.
Both resources can be downloaded from IBM Resource Link.
Please refer to the README.snipl and the manpages in the tarball for further information about the snipl and sncap applications.