More graphics from the command line
Tips and tricks for using ImageMagick on Linux
Last year I wrote an article for developerWorks about image manipulations on the command line using ImageMagick. The article was quite well received, and since then I have fielded many e-mail questions on ImageMagick. This article expands on the techniques discussed in that previous article, as well as answering as many of those questions as I can. If this is the first ImageMagick article from IBM DeveloperWorks that you've found, you would do well to have a look at this first article as well -- you will find it linked in the Related topics section.
This article takes the form of discussing specific problems as examples, but the concepts should be applicable to other problem spaces as well. This is the same approach as taken in the previous article. The techniques discussed here also work in combination with those we've discussed previously.
It should be noted that there are many ways to do the things discussed in this article. I will only discuss the methods I use, and know work for me. That doesn't mean the other tools out there are broken, it just means that I'm happy with what I am using now.
If you have a look at Mac OS/X, and many Web sites, the pictures have
quite nice curved corners. How do you achieve this effect with
ImageMagick? Well, we're going to have to show some ingenuity in producing
this effect by using the
Before we get there though, let's talk about the strategy we're going to employ. If you think about it, an image with curved corners can be made by taking some standard pre-made corners, and superimposing them over the original image. There's no real need for the corners to be curved even -- we could have angled corners, or something much more fancy.
Remember to make the unwanted parts of the corner transparent. This transparency will allow the image we are adding the corners to to show through. This can be a little confusing, as some image viewers such as xview will show the transparency in black or some other color.
Figure 1. The curved corner displayed with xview
The actual corner image will become more clear when we superimpose it upon an image, so let's get on with that. I have a thumbnail which I made earlier of the view from the shore of one of Canberra's lakes. Without the rounded corners, the thumbnail looks like this:
Figure 2. Lake Burley Griffin
To superimpose one image onto another, you use the
command. Let's just do one corner, to see what happens...
composite -gravity NorthEast rounded-ne.png lake.png lake-1.png
Here, the gravity argument defines where on the image to put the superimposed image -- in our case the rounded corner. This particular command gives us the following image:
Figure 3. Lake Burley Griffin with one rounded corner
So let's do the rest of the corners...
composite -gravity NorthEast rounded-ne.png lake.png lake-1.png
composite -gravity NorthWest rounded-nw.png lake-1.png lake-2.png
composite -gravity SouthEast rounded-se.png lake-2.png lake-3.png
composite -gravity SouthWest rounded-sw.png lake-3.png lake-4.png
Which gives us the finished image:
Figure 4. Lake Burley Griffin with rounded corners
Which looks kinda cool in my humble opinion. You should also take note that there is no reason for these corner images to be rounded. If you're interested in angled corners or such, then they're equally possible -- just change the corner images in a bitmap editor. In fact, you could even superimpose your logo onto the image instead of a corner.
If you want to use my rounded corners, a URL is listed in the resources section at the end of this article.
Finally, here's a small script which will allow you to round all the corners of all the png images in a given directory:
for img in *.png
composite -gravity NorthEast rounded-ne.png $img.png $img-1.png
composite -gravity NorthWest rounded-nw.png $img-1.png $img-2.png
composite -gravity SouthEast rounded-se.png $img-2.png $img-3.png
composite -gravity SouthWest rounded-sw.png $img-3.png $img-4.png
Putting frames around images
Another thing which several readers asked about was how to add frames to images. Again, this is relatively easy to do with ImageMagick.
A raised or lowered border
The first type of frame I will show you is a raised or lowered border. This effect works by tweaking the colors at the edge of an image to give the impression that it is either raised above the surrounding surface, or pushed below it. For the effect, you need to specify a size, with the horizontal size first, and then the vertical size. These sizes must obey the rule that twice the size specified must be less than or equal to the dimension of the image in that direction. For example, you can't specify a frame size vertically that is more than half the vertical size of the image -- which basically just means that you can't make a frame that's larger than the original picture.
To create a raised border, use the -raise command-line argument. For example, to create a 5 pixel by 5 pixel border, we execute:
convert -raise 5x5 tree.png tree-raised.png
Which gives us the finished image:
Figure 5. An image with a raised border
To create a lowered border, just use the +raise command-line argument instead. For example:
convert +raise 5x5 tree.png tree-lowered.png
Which gives a slightly different finished image:
Figure 6. An image with a lowered border
A simple colored border
If you're after something a little more simple, you might be interested in a border of just a solid color. ImageMagick can do this for you as well.
convert -bordercolor red -border 5x5 flower.png flower-border.png
Figure 7. An image with a red border
What border colors can we specify on the command line? Well, the list is simply too long to put into this article. To get a copy of the list, execute this command:
convert -list color
From bisque to burlywood and from cornsilk to seashell, there are 683 "basic" colors to choose from -- which is not to mention that you can also specify your own colors by using any of the following formats, where R represents the red value, G the green, B the blue, and A the alpha (transparency) value:
- #RGB - (R,G,B are hex numbers, 4 bits each)
- #RRGGBB - (8 bits each)
- #RRRGGGBBB - (12 bits each)
- #RRRRGGGGBBBB - (16 bits each)
- #RGBA - (4 bits each)
- #RRGGBBAA - (8 bits each)
- #RRRGGGBBBAAA - (12 bits each)
- #RRRRGGGGBBBBAAAA - (16 bits each)
- rgb(r,g,b) - (r,g,b are decimal numbers)
- rgba(r,g,b,a) - (r,g,b,a are decimal numbers)
Building a more complicated frame
Next let's build a slightly more complicated frame, using the -frame command-line argument. First we'll add a simple frame which is identical (except for the color) to the border we built in the previous example.
convert -mattecolor black -frame 5x5 beach.png beach-frame.png
The arguments are -mattcolor and -frame instead of -bordercolor and -border, but the rest is the same as with the border command.
Figure 8. A simple black border
Now we can add some extra complexity by adding some gray shading similar to what the -raise command gave us.
convert -mattecolor black -frame 5x5+2 beach.png beach-frame2.png
Which is getting there:
Figure 9. The same picture, but with some more decoration
Finally, we can add some more decoration, to get the final effect I want...
convert -mattecolor black -frame 5x5+2+2 beach.png beach-frame3.png
Which finally gives us:
Figure 10. A finished frame
If you're looking at ways to make nice frames for your images, then I recommend that you spend a few moments playing with the arguments to the -frame command. For example, here are some interesting frames for a picture of a rock at King's Canyon, in Australia.
For more information on the various frames available, check out the convert manpage.
convert -mattecolor gray -frame 25x25+0+25 rock.png rock-frame1.png
convert -mattecolor gray -frame 25x25+25+0 rock.png rock-frame2.png
Figure 11. A couple of frames
Processing many images at once
In my previous article, I showed you sample code to apply conversions to many images at once. As has been pointed out by several people, the code I showed was not the best way of doing this.
Here's the code I showed you:
Listing 1. Thumbnailing all the JPEGs in the current directory
for img in `ls *.jpg` do convert -sample 25%x25% $img thumb-$img done
Now it turns out that this is poor bash style, as it doesn't handle spaces in filenames very gracefully (each word will be treated as a separate filename). Instead, a better way of doing this in bash is to do:
Listing 2. Thumbnailing all the JPEGs in the current directory, with better bash
for img in *.jpg do convert -sample 25%x25% $img thumb-$img done
Which which will handle spaces in filenames much more gracefully.
It turns out, however, that both of these solutions aren't needed with
ImageMagick -- we can just use the
is used to convert a sequence of images (although it will work for single
images as well).
That code snippet above becomes:
mogrify -sample 25%x25% *.jpg
Note that this will overwrite the original images with new ones.
This is one of the limitations of
in that it is harder to
specify output filenames. The only way to specify an output filename
is to change the format of the output image compared with the input image.
This will result in a different extension for the new image. For
mogrify -format png -sample 25%x25% *.jpg
This will create a series of output files where the jpg at the end of the filename has been replaced with a png, with the associated image format change.
All of the conversions previously defined will also work with the
command, so if you don't mind the original images being
overwritten then it's a good choice. If you do mind
that the originals are overwritten, you can either copy them to a
temporary directory to mogrify them and change their names -- or you could
stick with convert and bash.
So far all of the examples we've discussed, both in this article and the previous one, have discussed simple conversions where each image stands alone. ImageMagick can also do interesting conversions to more than one image at once which are worth mentioning.
The most common example is ImageMagick's PDF handling. Let's imagine a scenario where you are sent a PDF which is a series of images (one per page). ImageMagick will extract those images for you into separate files. For example, here's a screen shot of a PDF document containing some pictures of my recent trip to linux.conf.au (which rocked by the way):
Figure 12. A sample PDF with a bunch of images
Let's imagine that the above PDF had been sent to you by a friend. You want to extract the images for further processing.
convert can of course extract these images from the PDF
convert foo.pdf pages.png
This will do what we want -- each page has been extracted to its own PNG file. However, there's an unexpected naming side effect.
Listing 3. Check out the filenames
mikal@deathstar:~/foo$ convert foo.pdf pages.png mikal@deathstar:~/foo$ ls pages* pages.png.0 pages.png.1 pages.png.2 pages.png.3 pages.png.4 mikal@deathstar:~/foo$
Because the command created more than one PNG file, a unique number has been appended to the filename. This won't work so well if you then try to use code or scripts which make assumptions about the file type based on the extension of the file.
Being a friendly utility,
convert allows us to specify the filename a little
better. The command above really should have looked like:
Listing 4. Extracting pages from a PDF document with better filenames
mikal@deathstar:~/foo$ convert foo.pdf pages-%03d.png mikal@deathstar:~/foo$ ls pages* pages-000.png pages-001.png pages-002.png pages-003.png pages-004.png mikal@deathstar:~/foo$
The %03d is a printf-style format specifier. All you need to know for this use is that %d means a decimal number, and that you can also pack in a set of leading zeros by inserting a 0<number> into the sequence. The number specifies the total number of digits the displayed value should consume.
It should be noted that you can extract PDF pages which also contain text. What is actually happening under the hood is that ImageMagick is using Ghostscript to render the page, and then converting it to your chosen image format. There's no optical character recognition though -- what you get is a bitmap.
You can also convert image files into PDFs with
In fact the PDF from the example above was built with this command:
convert dsc* foo.pdf
Just pass a list of image files to
and make sure that
the last filename in the list is the name of the PDF document to put them
Other formats which support more than one image per file
There are 45 other file formats which can store more than one image when used with ImageMagick, a pointer to the complete list is referenced in the Related topics section of this article.
All of these are handled in the same way as the PDF example described. Some of these are also really interesting. It's very convenient to be able to extract the pages of a postscript file as images (think about having thumbnails of your published papers on your Web site for instance), or being able to get to all of the pages of that multiple-page fax you just received as a TIFF image.
You can even extract frames from your MPEG movies, although that deserves more discussion than I have space for in this article.
In this article we've expanded on some of the interesting techniques discussed in my previous article about ImageMagick, including how to round the corners of your images (especially the thumbnails we discussed last time), add a variety of nice frames to your images, and process many images at once. We finished up with how to extract images from multi-page formats, and how to build new multi-page documents.
If you're looking for more information, then I encourage you to check out the ImageMagick Web site in the Related topics section of this article. Also, if you have any questions feel free to e-mail me.
Many thanks to all those people who asked the sensible questions which became this article. I also thank you for your patience with how long I took to answer them.
- ImageMagick is a collection of tools and libraries to read, write, and manipulate images in over 89 major formats. The ImageMagick Web site is an excellent resource, and offers downloads of the ImageMagick source code.
- Learn even more at Anthony Thyssen's ImageMagick Examples page.
- The GIMP, or GNU Image Manipulation Program, is a freely distributed piece of software suitable for such tasks as photo retouching, image composition and image authoring. It is released under the GNU General Public License (GPL).
- "Graphics from the command line" (developerWorks, July 2003) is the first article in the series and discusses how to thumbnail, rotate, apply interesting graphical manipulations, and determine image information with ImageMagick.
- The IBM Toolkit for MPEG-4 is a set of Java classes and APIs with sample playback and MPEG-4 generation applications. It's also one of the top downloads at alphaWorks -- check it out for yourself to see why!
- Get started with the article, Voice-Enabling Your Web Sites (developerWorks, November 2001).
- Got pictures and voice? Find out what impact it's having with IBM Tivoli Web Site Analyzer. IBM Tivoli Web Site Analyzer captures, analyzes, stores and reports on Web site usage, health, integrity and site content, and provides essential metrics on visitor site interactions and the site's overall performance