Topic
IC4NOTICE: developerWorks Community will be offline May 29-30, 2015 while we upgrade to the latest version of IBM Connections. For more information, read our upgrade FAQ.
5 replies Latest Post - ‏2013-11-05T01:34:44Z by FrankX.Ning
FrankX.Ning
FrankX.Ning
39 Posts
ACCEPTED ANSWER

Pinned topic WAMC_2013-06-27_Win64 cannot connect to Datapower XI52.6.0.0.2

‏2013-11-01T05:40:10Z |

Hello,

I am OK to add XI52.5.0.0.9 to WAMC on the machine where WAMC is setup. However, I am not able to do the same to add XI52.6.0.0.2 to the same WAMC on the same machine. The two datapower virtual appliances have the same setting except their different versions and IP addresses.

Errors for adding XI52.6.0.0.2 to WAMC:

Failed to connect to the appliance 192.168.253.165 on port 5550.Hide detailXNov 1, 2013 00:33:34:889| CWZBA0509E

Explanation:
A failure occurred when trying to connect by using the Appliance Management Protocol that is using the given host and port.

Suggestion:
Ensure that the host and port are correct, that the Appliance Management Protocol is enabled on the XML Management Interface, and that the appliance is available.
Nov 1, 2013 00:33:34:889| CWZBA0509E

Additional technical information:
javax.net.ssl.SSLHandshakeException: com.ibm.jsse2.util.j: PKIX path building failed: java.security.cert.CertPathBuilderException: unable to find valid certification path to requested target

Explanation:

Suggestion:
com.ibm.jsse2.util.j: PKIX path building failed: java.security.cert.CertPathBuilderException: unable to find valid certification path to requested target

Explanation:

Suggestion:
java.security.cert.CertPathBuilderException: unable to find valid certification path to requested target

  • HermannSW
    HermannSW
    4493 Posts
    ACCEPTED ANSWER

    Re: WAMC_2013-06-27_Win64 cannot connect to Datapower XI52.6.0.0.2

    ‏2013-11-01T18:03:42Z  in response to FrankX.Ning

    Hi Frank,

    > Failed to connect to the appliance 192.168.253.165 on port 5550.
    >
    this message seems to indicate that the XML management service is not up on your 6.0.0.2 box.

    Please check, and if reported as "up" and WAMC cannot access, then please send any command against the XML managent interface.
    (take any from the redpaper: http://www.redbooks.ibm.com/redpapers/pdfs/redp4446.pdf )


    Hermann<myXsltBlog/> <myXsltTweets/> <myCE/>

     


     

    • FrankX.Ning
      FrankX.Ning
      39 Posts
      ACCEPTED ANSWER

      Re: WAMC_2013-06-27_Win64 cannot connect to Datapower XI52.6.0.0.2

      ‏2013-11-02T01:06:09Z  in response to HermannSW

      Hi Hermann,

       

      The XML management service is up. On the same system where WAMC is running, i ran the following curl command which works. I got users returned.

      C:\dplab\XML>curl -H "ContentType: text/xml" --data-binary @get-config.xml https://192.168.253.161:5550/service/mgmt/current -u <user/password> -k

      I got the above error when I used the same IP, port, user and password to add the appliance to WAMC console.

      Regards

      Frank

      • HermannSW
        HermannSW
        4493 Posts
        ACCEPTED ANSWER

        Re: WAMC_2013-06-27_Win64 cannot connect to Datapower XI52.6.0.0.2

        ‏2013-11-03T20:51:42Z  in response to FrankX.Ning

        Hi Frank,

        yoir update does not shed light on the problem or a solution.

        Please create a PMR to get this investigated/resolved.


        Hermann<myXsltBlog/> <myXsltTweets/> <myCE/>

        • FrankX.Ning
          FrankX.Ning
          39 Posts
          ACCEPTED ANSWER

          Re: WAMC_2013-06-27_Win64 cannot connect to Datapower XI52.6.0.0.2

          ‏2013-11-05T01:34:44Z  in response to HermannSW

          Hi Hermann,

           

          It turned out that the "CA" certificate in WAMC is expired. I customized the keystore with a valid singing certificate and the issue is resolved.

          Thanks for your responses.

          Regards

          Frank

      • charanchowdary
        charanchowdary
        40 Posts
        ACCEPTED ANSWER

        Re: WAMC_2013-06-27_Win64 cannot connect to Datapower XI52.6.0.0.2

        ‏2013-11-04T16:42:56Z  in response to FrankX.Ning

        We are able to add 7199/6.0.0.2 device to WAMC.