Topic
  • 4 replies
  • Latest Post - ‏2013-06-18T12:52:13Z by Ideraldo
Ideraldo
Ideraldo
3 Posts

Pinned topic DS3200 not connect, Error PCI

‏2013-06-15T21:22:06Z |

Hi, i have a DS3200 IBM, I bought the storage only one controller more one daughter card SAS, the storage worked OK.  ten days ago a bought another controler with daugther card SAS, after I install the second controler the storage appears a error (light orange on the two controlers. I try swap the controlers, the same error (light orange).
I acess the storage with serial cable with Putty, and the following alert appears:

---- Log Entry #3 JUN-05-2013 10:51:04 AM ----

PCI DEVICE NOT FOUND: Host-side SAS Device=3 Function=0 ClassCode=0x10000 ParentBridge=PCI-X via ATU
REBOOTING.

---- Log Entry #4 JUN-05-2013 10:51:07 AM ----

PCI DEVICE NOT FOUND: Host-side SAS Device=3 Function=0 ClassCode=0x10000 ParentBridge=PCI-X via ATU
TRIGGERING LOCKDOWN.

can You Help Me?

Regards, ideraldo
 

  • Novikov_Alexander
    Novikov_Alexander
    1409 Posts

    Re: DS3200 not connect, Error PCI

    ‏2013-06-16T10:56:29Z  

    Dear Ideraldo,

    could you confirm that all steps of controller installation instruction were completed ? Check section "Installing a controller" of DS3200 documentation:

    Installation, User's, and Maintenance Guide - IBM System Storage DS3200
    http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5069915

    If everything were done correctly, let's check DS Support Data of your DS3200.

    Regards,
    Alexander Novikov
    Russia, Moscow

  • Ideraldo
    Ideraldo
    3 Posts

    Re: DS3200 not connect, Error PCI

    ‏2013-06-16T15:43:21Z  

    Dear Ideraldo,

    could you confirm that all steps of controller installation instruction were completed ? Check section "Installing a controller" of DS3200 documentation:

    Installation, User's, and Maintenance Guide - IBM System Storage DS3200
    http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5069915

    If everything were done correctly, let's check DS Support Data of your DS3200.

    Regards,
    Alexander Novikov
    Russia, Moscow

    Dear Alexander.

    Thanks for helping me, but I did much wrong by not knowing the equipment.

    I bought the DS3200 equipment used, and it came with a controller and a daughter card, it was working right.

    However, I needed four SAS ports for connecting four servers, so I bought another controller (used) with daughter card.

    So I got the second controller I just insert it in place B, and tried to access the IBM Storage Manager client 10. Thereafter no controller worked more, I can not access anything with the Storage Manager.

    I tried changing the controlers and put the controller A in site B (I think I made another mistake)

    Unfortunately I made no step installation guide, for he had no knowledge of it.

    I have a serial cable and can access the controler A and B for it.

    I do not know what commands I can use via the serial connection to the equipment back to normal, at least with the controller A.


    If you can help me I appreciate it!

    Regards,

    Ideraldo Bernardi

    Chapecó, SC - Brazil

    Updated on 2013-06-16T23:28:46Z at 2013-06-16T23:28:46Z by Ideraldo
  • Novikov_Alexander
    Novikov_Alexander
    1409 Posts

    Re: DS3200 not connect, Error PCI

    ‏2013-06-17T17:42:11Z  
    • Ideraldo
    • ‏2013-06-16T15:43:21Z

    Dear Alexander.

    Thanks for helping me, but I did much wrong by not knowing the equipment.

    I bought the DS3200 equipment used, and it came with a controller and a daughter card, it was working right.

    However, I needed four SAS ports for connecting four servers, so I bought another controller (used) with daughter card.

    So I got the second controller I just insert it in place B, and tried to access the IBM Storage Manager client 10. Thereafter no controller worked more, I can not access anything with the Storage Manager.

    I tried changing the controlers and put the controller A in site B (I think I made another mistake)

    Unfortunately I made no step installation guide, for he had no knowledge of it.

    I have a serial cable and can access the controler A and B for it.

    I do not know what commands I can use via the serial connection to the equipment back to normal, at least with the controller A.


    If you can help me I appreciate it!

    Regards,

    Ideraldo Bernardi

    Chapecó, SC - Brazil

    Hi Ideraldo,

    lets check output of serial connection to both controllers one by one (use DS3200 with only one controller A).

    Regards,
    Alexander Novikov
    Russia, Moscow

  • Ideraldo
    Ideraldo
    3 Posts

    Re: DS3200 not connect, Error PCI

    ‏2013-06-18T12:52:13Z  

    Hi Ideraldo,

    lets check output of serial connection to both controllers one by one (use DS3200 with only one controller A).

    Regards,
    Alexander Novikov
    Russia, Moscow

    Dear Alexander, thank  for your response.

    Yesterday I checked the Installation, User's, and Maintenance Guide - IBM System Storage DS3200.

    I update the storage controler A with firmware 7.0, and after the update  I put the controler B with storage On. The storage start and  works normaly.

    Thank You very much!

    Regards,

    Ideraldo