Topic
  • 2 replies
  • Latest Post - ‏2014-04-07T11:39:43Z by terms
terms
terms
27 Posts

Pinned topic Raid controller Firmware

‏2014-04-04T05:44:27Z |

Dear all,

M5014 SAS/SATA RAID CONTROLLER DISPLAYED AN ERROR FW HANG AND AFTER A MINUTE THE SERVER AUTOMATICALLY RESTARTED.NOW THE SERVER IS BOOTED AND THE THE RAID IS OPTIMAL,WORKING FINE,NO ERROR AS BEFORE.BUT AS PER CUSTOMER REQUIREMENTS WANTS TO UPDATE THE FIRMARE OF THE CONTROLLER.

I DOWNLOADED THE LATEST FIRMWARE OF THAT SPECIFIC CONTROLLER FOR WINDOWS SYSTEM(SERVER HOLDS WINDOWS O.S).RUN THE .EXE FILE,BUT THE UPDATTION OF CONTROLLER FAILED.

SO WHAT MIGHT BE THE SOLUTION.?

WILL BE APPRICIATED.

I HAVE ATTACHED THE ERROR LOG WHILE UPDATING FIRMWARE WITH DSA LOG TOO.

THANK YOU.

 

 

Updated on 2014-04-04T05:45:34Z at 2014-04-04T05:45:34Z by terms
  • srinivasushekharappa
    27 Posts
    ACCEPTED ANSWER

    Re: Raid controller Firmware

    ‏2014-04-04T20:29:58Z  

    What is the exiting firmware on this controller?

    Dependencies which can be found on README

    >>

     When upgrading from firmware version 12.7.0-0020 or below, a
     one-time firmware update to version 12.12.0-0085 is required
     before going to 12.12.0-0111 or higher
    

    If though it fails,  try updating from BoMC / else update the device driver of the controller & try.

     

  • srinivasushekharappa
    27 Posts

    Re: Raid controller Firmware

    ‏2014-04-04T20:29:58Z  

    What is the exiting firmware on this controller?

    Dependencies which can be found on README

    >>

     When upgrading from firmware version 12.7.0-0020 or below, a
     one-time firmware update to version 12.12.0-0085 is required
     before going to 12.12.0-0111 or higher
    

    If though it fails,  try updating from BoMC / else update the device driver of the controller & try.

     

  • terms
    terms
    27 Posts

    Re: Raid controller Firmware

    ‏2014-04-07T11:39:43Z  

    What is the exiting firmware on this controller?

    Dependencies which can be found on README

    >>

    <pre dir="ltr"> When upgrading from firmware version 12.7.0-0020 or below, a one-time firmware update to version 12.12.0-0085 is required before going to 12.12.0-0111 or higher </pre>

    If though it fails,  try updating from BoMC / else update the device driver of the controller & try.

     

    Thank you.