Topic
  • 4 replies
  • Latest Post - ‏2016-01-29T10:03:15Z by chr_btc-es
myrmidon
myrmidon
23 Posts

Pinned topic Rhapsody capabilities (test cases, HMI)

‏2013-04-26T13:31:30Z |

Hello,

I am very interested in:

- creating an HMI for my SysML model inside Rhapsody in order to simulate/verify my model

- auto generation of test-cases (sequence diagrams) from SysML model by Rhapsody

- auto verification of my test-cases (sequence diagrams)  by Rhapsody, taking into account my SysML model

Is something of these, possible to be done with Rapsody?

Thanks in advance for your time!

Updated on 2013-05-08T10:58:59Z at 2013-05-08T10:58:59Z by myrmidon
  • chr_btc-es
    chr_btc-es
    71 Posts

    Re: Rhapsody capabilities (test cases, HMI)

    ‏2013-05-04T17:01:41Z  

    Hi,

     

    you can auto generate test cases for a model using the Rhapsody ATG add on. Do you know the ATG tutorial? The tutorial shows how to develop a test (or requirements) model for the requirements, use ATG to generate test cases for this model and then use these test cases to test an implementation model. The tutorial can be found here (Tutorial for ATG model-based testing):

    http://pic.dhe.ibm.com/infocenter/rhaphlp/v8/index.jsp?topic=%2Fcom.ibm.rhp.integ.testingtools.doc%2Ftopics%2Frhp_r_dm_vendor_doc_testing.html

     

    Let me know if you have any more questions regarding this tutorial.

  • myrmidon
    myrmidon
    23 Posts

    Re: Rhapsody capabilities (test cases, HMI)

    ‏2013-05-08T10:55:50Z  

    Hi,

     

    you can auto generate test cases for a model using the Rhapsody ATG add on. Do you know the ATG tutorial? The tutorial shows how to develop a test (or requirements) model for the requirements, use ATG to generate test cases for this model and then use these test cases to test an implementation model. The tutorial can be found here (Tutorial for ATG model-based testing):

    http://pic.dhe.ibm.com/infocenter/rhaphlp/v8/index.jsp?topic=%2Fcom.ibm.rhp.integ.testingtools.doc%2Ftopics%2Frhp_r_dm_vendor_doc_testing.html

     

    Let me know if you have any more questions regarding this tutorial.

    Thanks a lot for your reply!

  • arejaybee
    arejaybee
    10 Posts

    Re: Rhapsody capabilities (test cases, HMI)

    ‏2016-01-27T16:49:00Z  

    Hi,

     

    you can auto generate test cases for a model using the Rhapsody ATG add on. Do you know the ATG tutorial? The tutorial shows how to develop a test (or requirements) model for the requirements, use ATG to generate test cases for this model and then use these test cases to test an implementation model. The tutorial can be found here (Tutorial for ATG model-based testing):

    http://pic.dhe.ibm.com/infocenter/rhaphlp/v8/index.jsp?topic=%2Fcom.ibm.rhp.integ.testingtools.doc%2Ftopics%2Frhp_r_dm_vendor_doc_testing.html

     

    Let me know if you have any more questions regarding this tutorial.

    <quote>
    Re: Rhapsody capabilities (test cases, HMI)
    May 4, 2013   in response to  @myrmidon
    Hi,
    
    you can auto generate test cases for a model using the Rhapsody ATG add on. Do you 
    know the ATG tutorial? The tutorial shows how to develop a test (or requirements) 
    model for the requirements, use ATG to generate test cases for this model and then 
    use these test cases to test an implementation model. The tutorial can be found here 
    (Tutorial for ATG model-based testing):
    http://pic.dhe.ibm.com/infocenter/rhaphlp/v8/index.jsp?topic=%2Fcom.ibm.rhp.integ.testingtools.doc%2Ftopics%2Frhp_r_dm_vendor_doc_testing.html
    
    Let me know if you have any more questions regarding this tutorial.</quote>
    

     

    Those links don't point to any specific example or tutorial.

    They just go to: 

    http://www-01.ibm.com/support/knowledgecenter/SSB2MU_8.0.0/com.ibm.rhp.homepage.doc/rhapsody80x_welcome.html"

    This is just a welcome page.

    Can you please provide an updated link? Thank you.

     

     

     

    Updated on 2016-01-27T16:56:35Z at 2016-01-27T16:56:35Z by arejaybee
  • chr_btc-es
    chr_btc-es
    71 Posts

    Re: Rhapsody capabilities (test cases, HMI)

    ‏2016-01-29T10:03:15Z  
    • arejaybee
    • ‏2016-01-27T16:49:00Z
    <pre class="html dw" data-editor-lang="js" data-pbcklang="html" dir="ltr"><quote> Re: Rhapsody capabilities (test cases, HMI) May 4, 2013 in response to @myrmidon Hi, you can auto generate test cases for a model using the Rhapsody ATG add on. Do you know the ATG tutorial? The tutorial shows how to develop a test (or requirements) model for the requirements, use ATG to generate test cases for this model and then use these test cases to test an implementation model. The tutorial can be found here (Tutorial for ATG model-based testing): http://pic.dhe.ibm.com/infocenter/rhaphlp/v8/index.jsp?topic=%2Fcom.ibm.rhp.integ.testingtools.doc%2Ftopics%2Frhp_r_dm_vendor_doc_testing.html Let me know if you have any more questions regarding this tutorial.</quote> </pre>

     

    Those links don't point to any specific example or tutorial.

    They just go to: 

    http://www-01.ibm.com/support/knowledgecenter/SSB2MU_8.0.0/com.ibm.rhp.homepage.doc/rhapsody80x_welcome.html"

    This is just a welcome page.

    Can you please provide an updated link? Thank you.

     

     

     

    Rhapsody  documentation has moved to IBM knowledge center:

    http://www-01.ibm.com/support/knowledgecenter/SSB2MU_8.1.4/com.btc.tcatg.user.doc/topics/com.btc.tcatg.user.doc.html?lang=en