Topic
IC4NOTICE: developerWorks Community will be offline May 29-30, 2015 while we upgrade to the latest version of IBM Connections. For more information, read our upgrade FAQ.
5 replies Latest Post - ‏2013-07-24T13:16:23Z by benray
4CD7_yugi_yami
4CD7_yugi_yami
3 Posts
ACCEPTED ANSWER

Pinned topic clearcase

‏2013-04-23T11:57:28Z |

Hi Everybody,

please help : how to get a vob tag from a view tag with a commande line(with cleartool or something like that).

thanks

  • ezizza
    ezizza
    6 Posts
    ACCEPTED ANSWER

    Re: clearcase

    ‏2013-04-24T16:26:40Z  in response to 4CD7_yugi_yami

    Not sure what you mean... what is it that you're trying to do? 

  • 4CD7_yugi_yami
    4CD7_yugi_yami
    3 Posts
    ACCEPTED ANSWER

    Re: clearcase

    ‏2013-05-20T14:48:35Z  in response to 4CD7_yugi_yami

    Hi ezizza

    i want to know if there is commande that return the vob tag from a view tag.

    in other way, i want to know if there is any correspondance between VIEW and VOB.

    And thanks.

    • benray
      benray
      74 Posts
      ACCEPTED ANSWER

      Re: clearcase

      ‏2013-05-20T15:10:26Z  in response to 4CD7_yugi_yami

      There is no *necessary* connection between a view and a vob. A view can access one vob or multiple vobs; a vob can be accessed by one or many views. Until you have an object tied to both (such as a checkout or view private file) there isn't much you can say about the connection between view and vob. Depending on the circumstance you might be able to tell which vob(s) are being used by a certain view at a given time. For example:

      - check the config spec. a snapshot view will show load rules for any vobs that are being loaded. a dynamic view *might* show rules that could help determine versions from certain vobs although in many cases it will not. a ucm config spec will show the components in the stream which should help determine the component vob(s)

      - if you cd into a vob in a dynamic view, the pwd command will show both the view and vob tag in use. also try the "cleartool pwv" command to print the current working directory view and/or set view

      Does this help or is there something specific you're looking for?

      • 4CD7_yugi_yami
        4CD7_yugi_yami
        3 Posts
        ACCEPTED ANSWER

        Re: clearcase

        ‏2013-07-24T09:03:16Z  in response to benray

        Hi benray,

        Thanks a lot for your answer, it was very helpful.

        Now i want to know how can i get via commande line the mounted vob/vobs when using(setting) a specific view.

        And thanks.

         

        • benray
          benray
          74 Posts
          ACCEPTED ANSWER

          Re: clearcase

          ‏2013-07-24T13:16:23Z  in response to 4CD7_yugi_yami

          Does this help?

          [root@benray ~]# cleartool mount /vobs/vob2

          [root@benray ~]# cleartool setview root1
          [root@benray ~]# cleartool pwv
          Working directory view: ** NONE **
          Set view: root1
          [root@benray ~]# cd /vobs/vob2
          [root@benray vob2]# cleartool pwv
          Working directory view: root1
          Set view: root1
          [root@benray vob2]# ls
          a  b  c  lost+found
          [root@benray vob2]# cleartool ls
          a@@/main/CHECKEDOUT from /main/0                         Rule: CHECKEDOUT
          b@@/main/CHECKEDOUT from /main/0                         Rule: CHECKEDOUT
          c@@/main/CHECKEDOUT from /main/0                         Rule: CHECKEDOUT
          lost+found@@/main/0                                      Rule: /main/LATEST