Topic
  • 4 replies
  • Latest Post - ‏2013-07-01T15:22:25Z by MJABER
MJABER
MJABER
14 Posts

Pinned topic Problem communicating with BSMP

‏2013-06-18T14:34:33Z |

Dear Team , 

i have issue with one blade HS22 shows the below error message on management console : Problem communicating with BSMP

i did change the blade bay and update the firmware of the management and restart the management module but still facing this issue , 

any idea regarding this please .

  • Josh_Corder
    Josh_Corder
    94 Posts

    Re: Problem communicating with BSMP

    ‏2013-06-18T14:39:19Z  

    If you have reseated the blade and this error persists, the service processor has failed and needs to be replaced.  

  • MJABER
    MJABER
    14 Posts

    Re: Problem communicating with BSMP

    ‏2013-06-18T15:22:45Z  

    If you have reseated the blade and this error persists, the service processor has failed and needs to be replaced.  

    Hi Josh_Corder , 

     

    is it possible to replace the service processor alone or i have to change all the system board ? 

    Thanks 

  • Josh_Corder
    Josh_Corder
    94 Posts

    Re: Problem communicating with BSMP

    ‏2013-06-19T20:39:28Z  
    • MJABER
    • ‏2013-06-18T15:22:45Z

    Hi Josh_Corder , 

     

    is it possible to replace the service processor alone or i have to change all the system board ? 

    Thanks 

    Not that I'm aware of.  I've only done it with the board replacement.

  • MJABER
    MJABER
    14 Posts

    Re: Problem communicating with BSMP

    ‏2013-07-01T15:22:25Z  

    Not that I'm aware of.  I've only done it with the board replacement.

    hi , 

     

    i have replaced the system board and it works fine , i have got an issue once the system boot it keep hanging on " uefi platform initialization hang " 

     

    what i did is remove the blade server and remove the battery  for 30 sec and reinsert the server again still go the same error .