Topic
  • 1 reply
  • Latest Post - ‏2013-06-14T01:27:49Z by Hyung-NamKim
Colin.Angus
Colin.Angus
1 Post

Pinned topic x3650 M4 7915-D2G RAID failure. All member disks offline

‏2013-06-10T14:04:03Z |

Hi all,

I've recently installed a new server 7915-D2G with 5 x 600GB 6GBs disks as RAID5 + HS.

The server has only been running for a few days and backup was still not configured. The RAID controller seems to have failed. I have an issue logged with IBM who have suggested the faulty RAID I/F (M5110e). A new card is being shipped out overnight.

My worry is the data on the drives. From reading many forum posts re IBM's and OFFLINE RAID volumes I'm fearing the worst regarding my data. Has anyone seen this issue, and was the raid-set recoverable following the controller replacement?

  • Hyung-NamKim
    Hyung-NamKim
    2 Posts

    Re: x3650 M4 7915-D2G RAID failure. All member disks offline

    ‏2013-06-14T01:27:49Z  

    Hi

    I experienced same problem.

    System were hang ago, so After the System reboot and then Not found array disk.

    At that time I solved, Data Protection configured Dissabled.

    It possible to solve Webbios or MSM.

    Webbios)

    DriveGroup Click in WebBios array configure.

    May be configured setting Data Protection Enabled.

    Change Disabled.

    MSM setting Same., too.

     

    Leave about the issue RetainTip

    https://www-947.ibm.com/support/entry/myportal/docdisplay?lndocid=migr-5090966