Topic
  • 2 replies
  • Latest Post - ‏2013-08-13T15:28:30Z by cassius
cassius
cassius
2 Posts

Pinned topic IBM BladeCenter H Type 8852 Power on Blades Behavior

‏2013-08-13T15:01:13Z |

Hello,

Is the behavior normal, when you feed electrically the chassis IBM BladeCenter H Type 8852 then all blades are automatically powered on? This behavior can be changed, please?

  • Josh_Corder
    Josh_Corder
    94 Posts

    Re: IBM BladeCenter H Type 8852 Power on Blades Behavior

    ‏2013-08-13T15:08:55Z  

    If you login to the AMM web interface, go to Blade Tasks, Configuration, Policy Settings, Auto-power on mode there are three settings.  Restore previous state will put them back as they were before the power disruption.  Auto Power brings them on and Manual power leaves them off.  

    I hope this helps.  

  • cassius
    cassius
    2 Posts

    Re: IBM BladeCenter H Type 8852 Power on Blades Behavior

    ‏2013-08-13T15:28:30Z  

    If you login to the AMM web interface, go to Blade Tasks, Configuration, Policy Settings, Auto-power on mode there are three settings.  Restore previous state will put them back as they were before the power disruption.  Auto Power brings them on and Manual power leaves them off.  

    I hope this helps.  

    Hello,

     

    Thank you very much.