Topic
  • 7 replies
  • Latest Post - ‏2013-11-05T12:14:17Z by srinivasushekharappa
Mike Frolov
Mike Frolov
4 Posts

Pinned topic Nortel Layer2-3 GbE Switch Module boot problem

‏2013-11-01T11:24:53Z |

Hi!

 

After rebooting the switch chassis is not loaded. No IP accesse. In rs232 console:

PPCBoot 0.0.5.0

Memory Test (0x00) .................................................. PASSED

Extended Memory Test (0x01) ......................................... PASSED

ECC Memory Test (0x01) .............................................. PASSED

I2C Test (0x02) ..................................................... PASSED

Flash Init (0x04) ................................................... PASSED

Flash Protect Check (0x05) .......................................... SKIPPED

Flash Memory Test (0x06) ............................................ PASSED

Platform Init (0x07) ................................................

Checking Serial Number ...

PASSED

Devices Out-Of-Reset ................................................ PASSED

PCI Probe @ DEV 00 FUN 00 (0x11) .................................... PASSED

PCI Probe @ DEV 30 FUN 00 (0x14) .................................... PASSED

PCI Device Init (0x15) .............................................. PASSED

PCI Memory Test (0x16) .............................................. PASSED

PCI Probe @ DEV 10 FUN 00 (0x17) .................................... PASSED

PCI Device Init (0x18) .............................................. PASSED

PCI Memory Test (0x19) .............................................. PASSED

Connector A : Copper

Connector B : Shunt

Booting Linux .........................................

./mp.elf.strip: /lib/libc.so.6: version `GLIBC_2.3' not found (required by ./mp.elf.strip)

./mp.elf.strip: /lib/libc.so.6: version `GLIBC_2.3.4' not found (required by ./mp.elf.strip)

./mp.elf.strip: /lib/libc.so.6: version `GLIBC_2.4' not found (required by ./mp.elf.strip)

./mp.elf.strip: /lib/libpthread.so.0: version `GLIBC_2.3.4' not found (requiredby ./mp.elf.strip)

Rebooting...

and cyclic reboot

 

How to switch boot to image2?  Shift B while Memory Test is in progress dont work.

 <Shift B> while the Memory

 

Test is in progress and the dots are being displayed
  • srinivasushekharappa
    15 Posts

    Re: Nortel Layer2-3 GbE Switch Module boot problem

    ‏2013-11-02T21:14:26Z  

    Have you tried resetting to factory defaults from MM ?

    Updated on 2013-11-02T21:30:02Z at 2013-11-02T21:30:02Z by srinivasushekharappa
  • Mike Frolov
    Mike Frolov
    4 Posts

    Re: Nortel Layer2-3 GbE Switch Module boot problem

    ‏2013-11-05T04:07:22Z  

    Have you tried resetting to factory defaults from MM ?

    Yes, that's the first thing I tried.

  • srinivasushekharappa
    15 Posts

    Re: Nortel Layer2-3 GbE Switch Module boot problem

    ‏2013-11-05T10:07:14Z  

    Yes, that's the first thing I tried.

    Can you try shift+M, while memory test...

  • Mike Frolov
    Mike Frolov
    4 Posts

    Re: Nortel Layer2-3 GbE Switch Module boot problem

    ‏2013-11-05T10:34:13Z  

    Can you try shift+M, while memory test...

    It did not work too.

  • srinivasushekharappa
    15 Posts

    Re: Nortel Layer2-3 GbE Switch Module boot problem

    ‏2013-11-05T10:52:06Z  

    It did not work too.

    Hmmm i don't know... make sure the serial cable is supported.

  • Mike Frolov
    Mike Frolov
    4 Posts

    Re: Nortel Layer2-3 GbE Switch Module boot problem

    ‏2013-11-05T11:33:43Z  

    Hmmm i don't know... make sure the serial cable is supported.

    I'm use FRU 02R9365 cable.

  • srinivasushekharappa
    15 Posts

    Re: Nortel Layer2-3 GbE Switch Module boot problem

    ‏2013-11-05T12:14:17Z  

    I'm use FRU 02R9365 cable.

    Console cable is supported.. no idea why its not accepting shift+b/m.