Topic
  • 1 reply
  • Latest Post - ‏2013-07-30T14:38:25Z by Hyung-NamKim
rakeshsinnya
rakeshsinnya
26 Posts

Pinned topic Storage Subsystem in Recovery Mode

‏2013-05-14T09:35:51Z |

Storage: DS3512

Recovery Guru message: 

Storage Subsystem in Recovery Mode

Tried to clear recovery mode but storage was not opening through SM Client and was in unknown State.

 

Error code at back side is looping between : 0.F and L.(inverted F).

Thanks in advance

 

  • Hyung-NamKim
    Hyung-NamKim
    1 Post

    Re: Storage Subsystem in Recovery Mode

    ‏2013-07-30T14:38:25Z  

    Hello,

    This problem  solutioni is simple

    Shell programming connect and then, type two commands

    Controller A connect to serial port

    type commands bellow 

    loadDebug

    lemClearLockdown

     

    and then, connect controller B

    types same command,

     

    Regards.