Topic
No replies
Ahmar
Ahmar
37 Posts
ACCEPTED ANSWER

Pinned topic Ds3524 Controller B reboots constantly after replacement

‏2013-07-24T19:36:41Z |

Hi,

Pls check the below info

After we replaced the faulty controller B on DS3524. And since replacing we are facing the issue.

I was able to access and ran the recommended commands from Controller A console.

But when I access the controller B it goes into constant reboot cycle and does not allow to access and issue the required commands from the console interface.

 

From the storage manager the error appears and goes away with every  aautomatic reboot cycle.

 

Kindly advice.

 

Have tried

Try to place controller online via GUI

If that does not work remove controller B                                                    

From working controller issue the commands:

loadDebug                                                  
cmgrSetAltToFailed                                          


(Wait 1 minute)                                            

cmgrSetAltToOptimal                                        
unld "Debug"                                                


Then reinsert ctrl B.            

But then the Controller B goes into constant reboots and cannot perform below steps
In case B show a lock down code , log in to B and issue


loadDebug
lemClearLockdown
sysReboot

Kindly advice.