Topic
1 reply Latest Post - ‏2013-05-04T11:34:14Z by Novikov_Alexander
san1223
san1223
1 Post
ACCEPTED ANSWER

Pinned topic zoning config

‏2013-04-30T15:11:45Z |

Dear All,

we got new san storage Ds3512 and san switch 2498-b24 and p740server.

i  created alias in san switch and maped in storage after some time i am getting error in san switch.

 

 

Date/Time: 4/30/13 12:08:30 PM
Sequence number: 4225
Event type: 4011
Event category: Error
Priority: Critical
Event needs attention: true
Event send alert: true
Event visibility: true
Description: Logical Drive not on preferred path due to ADT/RDAC failover
Event specific codes: 0/0/0
Component type: Controller
Component location: Enclosure 99, Slot B
Logged by: Controller in slot B
 
Raw data:
4d 45 4c 48 03 00 00 00 81 10 00 00 00 00 00 00 
11 40 18 01 3e b4 7f 51 00 00 00 00 00 00 00 00 
00 00 00 00 01 00 00 00 22 00 00 00 22 00 00 00 
08 00 00 00 63 00 00 00 02 00 00 00 01 00 00 00 
0a 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
01 00 00 00 00 00 01 00 00 00 00 00 

when i checked some one told there is my be zonin problem, i need some help in this.

Updated on 2013-04-30T15:16:13Z at 2013-04-30T15:16:13Z by san1223
  • Novikov_Alexander
    Novikov_Alexander
    1398 Posts
    ACCEPTED ANSWER

    Re: zoning config

    ‏2013-05-04T11:34:14Z  in response to san1223

    Dear sanaulla,

    could you provide DS Support Data of DS3512 and supportshow output from FC switches.

    Regards,
    Alexander Novikov
    Russia, Moscow