Hello fellow x-series,
I received from comment last couple of weeks as per below:
"The drive is just showing ready and needs to be assigned as HOT SPARE. You have 2 arrays setup in the system, a raid-5 and raid-1, need to set the ready drive to HOT SPARE status. No Hard drive needs to be replaced."
Any redbook or technical instruction that i can follow to accomplish this. Thanks.
This topic has been locked.
2 replies Latest Post - 2013-04-05T05:45:48Z by SystemAdmin
Pinned topic How to set "ready" drive for hot spare status
Answered question This question has been answered.
Unanswered question This question has not been answered yet.
Updated on 2013-04-05T05:45:48Z at 2013-04-05T05:45:48Z by SystemAdmin
SystemAdmin 110000D4XK9111 PostsACCEPTED ANSWER
Re: How to set "ready" drive for hot spare status2013-04-04T01:14:51Z in response to FirdhausYou can assign hot spares under WebBios.
Download ServeRAID M Software User's Guide: http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5086126
The User's Guide explains how to find the hot spare option.
Go to Section 4.6.3 and look at figure 4.52 (Physical Drive Screen). You'll see an option "Make Global HSP".