My server x3650 has BRD-error LED on front panel. I opened chassis and found lighting "Riser-Card missing error LED". But riser-card had inserted in system board. Maybe riser-card is faulty? How can I detect it?
Pinned topic x3650 (7979KPG), can't detect LED cause, riser fault?
Answered question This question has been answered.
Unanswered question This question has not been answered yet.
Updated on 2013-04-02T10:52:33Z at 2013-04-02T10:52:33Z by SystemAdmin
SystemAdmin 110000D4XK9111 Posts
Re: x3650 (7979KPG), can't detect LED cause, riser fault?2013-04-02T10:52:33ZThis is the accepted answer. This is the accepted answer.Hi,
you should clear the BMC SEL from BIOS, events log is full from very long time.
If your server is working fine and getting brd error,..then i am suspecting its
most likely caused by faulty or missing PCI riser card assembly.
Makesure its seated properly,if still error then you should replace it.