i want to delete some not needed zoneconfigs on the SAS RAID Ctlr via telnet but i didn´t work
So i login via telnet and
send the following command
zoneconfig erase 1
but zoneconfig get 1 show that the zone is still there? What i´m doing wrong hereß
THX in advance
Pinned topic Erase ZoneConfig on SAS RAID Ctlr on HS22
Answered question This question has been answered.
Unanswered question This question has not been answered yet.
Updated on 2013-03-23T13:49:18Z at 2013-03-23T13:49:18Z by SystemAdmin
SystemAdmin 110000D4XK3234 Posts
Re: Erase ZoneConfig on SAS RAID Ctlr on HS222013-03-22T15:15:49ZThis is the accepted answer. This is the accepted answer.zoneconfig erase 1 should wipe any changes you have made to the custom defined zones 1-4. I do not believe you can erase the pre-defined zones. You cannot completely remove a zone if that is what you are trying to do, but it should set it back to the original MFG configuration for that zone. Which if I'm not mistaken is blades are only assigned to themselves and the external ports.