Topic
No replies
SystemAdmin
SystemAdmin
17917 Posts
ACCEPTED ANSWER

Pinned topic DB2 related issue when I take LDAP backup using idsdb2ldif.cmd

‏2013-03-13T12:20:14Z |
Hi,

I have a job which take backup of ldap(ldf format). It was running properly without any issues. Recently, it creates backup file with 0kb. When I run the job manually I have got the error message “GLPRDB001E Error code -1 from function:" SQLConnect " <DBName> .”. When I have checked the db2diag.log file I have got the below messages.

db2diag.log:
============
***************************************************************************************************************
2013-03-04-05.36.20.591000-300 E34198451H363 LEVEL: Error (OS)
PID : 2416 TID : 2832 PROC : db2syscs.exe
INSTANCE: DB2 NODE : 000
FUNCTION: DB2 UDB, oper system services, sqloImpersonateLocalSystem, probe:10
MESSAGE : ZRC=0x83000005=-2097151995
CALLED : OS, -, OpenProcess
OSERR : 5 "Access is denied."

2013-03-04-05.36.20.591000-300 I34198816H282 LEVEL: Severe
PID : 2416 TID : 2832 PROC : db2syscs.exe
INSTANCE: DB2 NODE : 000
FUNCTION: DB2 UDB, common communication, sqlccGetIPCs, probe:20
RETCODE : ZRC=0x83000005=-2097151995

2013-03-04-05.36.20.606000-300 I34199100H350 LEVEL: Severe
PID : 2416 TID : 2832 PROC : db2syscs.exe
INSTANCE: DB2 NODE : 000
FUNCTION: DB2 UDB, trace services, sqlt_logerr_data, probe:0
MESSAGE : User ID
DATA #1 : Hexdump, 4 bytes
0x02B7FAC0 : 0000 0000 ....

2013-03-04-05.36.20.606000-300 I34199452H466 LEVEL: Severe
PID : 2856 TID : 3032 PROC : db2fmp.exe
INSTANCE: DB2 NODE : 000
FUNCTION: DB2 UDB, DRDA Communication Manager, sqljcCommConnect, probe:10
MESSAGE : ZRC=0x82360001=-2110390271=SQLJC_ERROR_ICE "SYSTEM ERROR"
DIA8532C An internal processing error has occurred.
DATA #1 : String, 11 bytes
CCI Error:
DATA #2 : unsigned integer, 4 bytes
81
***************************************************************************************************************

When I have tried to connect to the respective database from db2control center am gettting the below error.

***************************************************************************************************************
A system error (reason code = "") occurred. Subsequent SQL
statements cannot be processed. SQLSTATE=58005

Explanation:

A system error occurred.

User Response:

Record the message number (SQLCODE) and reason code in the
message.

If trace was active, invoke the Independent Trace Facility at
the operating system command prompt. Then contact your technical
service representative with the following information:

o Problem description

o SQLCODE and embedded reason code

o SQLCA contents if possible

o Trace file if possible.

Federated system users: isolate the problem to the data source
failing the request (refer to the problem determination guide to
determine which data source is failing to process the SQL
statement) and take the necessary diagnostic steps for that data
source. The problem determination procedures for data sources
vary, so refer to the applicable data source manuals.

sqlcode : -902

sqlstate : 58005
***************************************************************************************************************

What could be the issue. Pls help on this.
Thanks in Advance.