Topic
  • 2 replies
  • Latest Post - ‏2013-03-05T14:30:55Z by renauld.cedric
renauld.cedric
renauld.cedric
17 Posts

Pinned topic FC3171 in Pass-thru mode with Nexus vsan in backside ...

‏2013-02-22T16:55:36Z |
Hi, anybody have some documentation about the vsan configuration on NEXSUS CISCO with the FC3171 (Qlogic) in Pass-thru mode ?

Thanks
Updated on 2013-03-05T14:30:55Z at 2013-03-05T14:30:55Z by renauld.cedric
  • kcorkins
    kcorkins
    1 Post

    Re: FC3171 in Pass-thru mode with Nexus vsan in backside ...

    ‏2013-03-04T17:24:30Z  
    There may no be any documentation for this configuration. The FC3171 will send all traffic up to the Cisco SAN switch as NPIV. You shouuld enable the port on the Cisco SAN switch as NPIV, and you'll have multiple initiators (from the Flex Nodes attempting to FLOGI to the SAN.

    Whatever vSAN the Cisco port is a member of, will be the VSAN the initiators will be a member of.
  • renauld.cedric
    renauld.cedric
    17 Posts

    Re: FC3171 in Pass-thru mode with Nexus vsan in backside ...

    ‏2013-03-05T14:30:55Z  
    • kcorkins
    • ‏2013-03-04T17:24:30Z
    There may no be any documentation for this configuration. The FC3171 will send all traffic up to the Cisco SAN switch as NPIV. You shouuld enable the port on the Cisco SAN switch as NPIV, and you'll have multiple initiators (from the Flex Nodes attempting to FLOGI to the SAN.

    Whatever vSAN the Cisco port is a member of, will be the VSAN the initiators will be a member of.
    Oki,
    Big Thanks