Topic
  • 3 replies
  • Latest Post - ‏2013-02-16T16:00:34Z by SystemAdmin
SystemAdmin
SystemAdmin
3234 Posts

Pinned topic HS21 8853 CPU compatibility

‏2013-02-15T10:06:58Z |
Does HS21 8853-Z34 supports L5420 CPU`s? I`ve got srevers with the newest BIOS (1.22) but they are unable to start with L5420 CPU`s. With L5320 they start but I`m receiving "POSTBIOS: 289 Processors not recommended on this level hardware" message. With E5160 they work fine.
Is there any full CPU compatibility list for HS21? I found only this one:
http://www-03.ibm.com/systems/xbc/cog/Withdrawn/bc_hs21_8853/bc_hs21_8853po.html
But there is no 8853-Z45 in it :/
Updated on 2013-02-16T16:00:34Z at 2013-02-16T16:00:34Z by SystemAdmin
  • SystemAdmin
    SystemAdmin
    3234 Posts

    Re: HS21 8853 CPU compatibility

    ‏2013-02-15T10:08:24Z  
    of courle I mean 8853-Z34
  • SystemAdmin
    SystemAdmin
    3234 Posts

    Re: HS21 8853 CPU compatibility

    ‏2013-02-16T13:30:27Z  
    of courle I mean 8853-Z34
    Hey
    I got the same problem,, HS21 8853-l3g it coms with Intel Xeon 5130 (dual core 2.0GHz)
    it runs with the 289 error with a Xeon 5335 (quat core 2.0GhZ) but dead with Xeon E5420 (Qc 2.5GHz)

    In log it says: (02-Render Blade) Planar voltage fault.

    It seams that 8853-AC1 can user alot more processores?? any one??
  • SystemAdmin
    SystemAdmin
    3234 Posts

    Re: HS21 8853 CPU compatibility

    ‏2013-02-16T16:00:34Z  
    Hey
    I got the same problem,, HS21 8853-l3g it coms with Intel Xeon 5130 (dual core 2.0GHz)
    it runs with the 289 error with a Xeon 5335 (quat core 2.0GhZ) but dead with Xeon E5420 (Qc 2.5GHz)

    In log it says: (02-Render Blade) Planar voltage fault.

    It seams that 8853-AC1 can user alot more processores?? any one??
    It seems that 8853-L3G has a systemboard : (44T1700)and that is not the same in all 8853´s.
    http://www.ibm.com/developerworks/forums/thread.jspa?messageID=14787499

    My systemboard(44T1700)in 8853-L3G is made for these models :
    E1x, 5110 (1.6GHz 4MB L2 1066MHz 65w)
    E3x, 5130 (2.0GHz 4MB L2 1333MHz 65w)
    E4x, 5140 (2.33GHz 4MB L2 1333MHz 65w)
    E5x, 5150 (2.66GHz 4MB L2 1333MHz 65w)
    E6x, 5160 (3.0GHz 4MB L2 1333MHz 80w) supported in BC H Chassis only
    H1x, 5148 (2.33GHz 4MB L2 1333MHz 40w)
    L1x, 5110 (1.6GHz 4MB L2 1066MHz 65w)
    L2x, 5120 (1.86GHz 4MB L2 1066MHz 65w)
    L3x, 5130 (2.0GHz 4MB L2 1333MHz 65w)
    L4x, 5140 (2.33GHz 4MB L2 1333MHz 65w)
    L5x, 5150 (2.66GHz 4MB L2 1333MHz 65w)
    L6x, 5160 (3.0GHz 4MB L2 1333MHz 80w) supported in BC H Chassis only
    NTx 5138 (2.13GHz 4MB L2 1066MHz 35w)

    Here is one with the same problem: http://www.ibm.com/developerworks/forums/thread.jspa?messageID=14643845

    But when i can run Intel Xeon e5335 (with a error), that is made for 8853-A2Y and 8853-ANY on the (44T1800)systemboard.
    Maby the rest of ther prosseres for(44T1800)will "work" to..

    A1x, E5310 (1.6GHz 4MB L2 1066MHz 80w)
    A2x, E5335 (2.0GHz 8MB L2 1066MHz 80w)
    AMx, E5310 (1.6GHz 8MB L2 1066MHz 80w)
    ANx, E5335 (2.0GHz 8MB L2 1333MHz 80w)
    C1x, E5320 (1.86GHz 8MB L2 1066Mhz 80w)
    C2x, E5345 (2.33GHz 8MB L2 1333MHz 80w)
    C3x, X5355 (2.66GHz 8MB L2 1333MHz 120w)
    C4x, X5365 (3.0GHz 8MB L2 1333MHz 120W)
    EQx, E5310 (1.6GHz 8MB L2 1066MHz 80w)
    ERx, E5345 (2.33GHz 8MB L2 1333MHz 80w)
    E7x, ??
    J1x, L5310 (1.6GHz 8MB L2 1066MHz 50w)
    J2x, L5320 (1.86GHz 8MB L2 1066MHz 50w)
    LMx, 5160 (3.0GHz 4MB L2 1333MHz 80w)

    Any one??