Topic
  • 3 replies
  • Latest Post - ‏2013-02-18T10:06:50Z by PrashannaVenkatesh
PrashannaVenkatesh
PrashannaVenkatesh
2 Posts

Pinned topic 9117-MMA POWER6 System Firmware upgrade query

‏2013-02-10T19:15:28Z |
hi
I am planning to upgrade system firmware upgrade on one my POWER6 server (9117-MMA)
Current version is EM340_XXX & planning to upgrade to EM350_XXX via HMC (V7)

I understand that this'll be a disruptive task - but not sure whether after upgrade the system will be available
in the HMC as before or will loose it's connection, whether do I need to configure FSP IP again etc..

please advise
Updated on 2013-02-18T10:06:50Z at 2013-02-18T10:06:50Z by PrashannaVenkatesh
  • SystemAdmin
    SystemAdmin
    6902 Posts

    Re: 9117-MMA POWER6 System Firmware upgrade query

    ‏2013-02-11T05:56:41Z  
    hi

    not,only the version of the FSP will updated
    HMC is modified in any way
    Check only before the update version of the HMC is compatible with the new firmware version installed
  • dukessd
    dukessd
    345 Posts

    Re: 9117-MMA POWER6 System Firmware upgrade query

    ‏2013-02-11T23:50:51Z  
    hi

    not,only the version of the FSP will updated
    HMC is modified in any way
    Check only before the update version of the HMC is compatible with the new firmware version installed
    Latest:
    http://www-304.ibm.com/webapp/set2/sas/f/power5cm/power6.html

    Supported:
    http://www-304.ibm.com/webapp/set2/sas/f/power5cm3/emtablep6.html

    HTH
  • PrashannaVenkatesh
    PrashannaVenkatesh
    2 Posts

    Re: 9117-MMA POWER6 System Firmware upgrade query

    ‏2013-02-18T10:06:50Z  
    I have performed the firmware upgrade during the last week-end.
    Release upgrade EM340_XXX to EM350_XXX was Disruptive and it took approx 20 minutes. However the HMC to system Frame connection (FSP IP connection) remain un-disturbed.

    Thanks for those who had responded..