Topic
3 replies Latest Post - ‏2013-02-08T01:02:19Z by HendersonD
HendersonD
HendersonD
46 Posts
ACCEPTED ANSWER

Pinned topic HS22 Firmware Upgrade Problems

‏2013-02-06T01:40:38Z |
I have been attempting to upgrade the uEFI, IMM, and DSA Preboot firmware on an HS22 blade with little luck. The blade is running Windows Server 2008 R2 so I tried using UpdateExpress, all three upgrades bombed. I then used Bootable Media Creator version 9.3 and it also bombed on all three upgrades.

Any ideas?
Updated on 2013-02-08T01:02:19Z at 2013-02-08T01:02:19Z by HendersonD
  • SystemAdmin
    SystemAdmin
    3234 Posts
    ACCEPTED ANSWER

    Re: HS22 Firmware Upgrade Problems

    ‏2013-02-06T11:13:45Z  in response to HendersonD
    Get the .exe update files from the IBM website. Try running the updates through your AMM (update your AMM first to the latest level bpet62u at present)

    Run the updates in the following order IMM, Uefi and then Diags

    its simple, browse to the appropriate .exe select the blade(s) you want to update and click update. The updates will run all at the same time and report back a progess bar. If the update bombs out on a blade, try reseating it wait for it to divsover and then try update again.
    • HendersonD
      HendersonD
      46 Posts
      ACCEPTED ANSWER

      Re: HS22 Firmware Upgrade Problems

      ‏2013-02-08T01:01:38Z  in response to SystemAdmin
      That did the trick. I was able to update the uEFI and IMM firmware through the Advanced Management Module. Once I rebooted the server I was able to update the DSA Preboot through update express.

      Not sure why I could not update uEFI or IMM through either UpdateExpress or Bootable Media Creator.

      Thanks for the help