Topic
1 reply Latest Post - ‏2013-01-31T21:19:01Z by SystemAdmin
SystemAdmin
SystemAdmin
9111 Posts
ACCEPTED ANSWER

Pinned topic How to remove the Raid 1 settings from the IBM server.

‏2013-01-28T15:45:38Z |
I have to re install windows 2000 in an IBM x343 server , but i get a setup error as no hard disk found.
While booting when we check the Raid Configuration by ctrl+A it shows first slot no device found. and the second Slot it shows mirrored optimal 146 GB.

I have no idea how to proceed further.

Thank you in advanced!
Updated on 2013-01-31T21:19:01Z at 2013-01-31T21:19:01Z by SystemAdmin
  • SystemAdmin
    SystemAdmin
    9111 Posts
    ACCEPTED ANSWER

    Re: How to remove the Raid 1 settings from the IBM server.

    ‏2013-01-31T21:19:01Z  in response to SystemAdmin
    Hiya,

    Have you swapped the disks over? You may have a faulty drive.

    Also, try booting from the IBM ServeRaid CD .. v7.00 for an x343

    Regards,

    Richard