Topic
  • 4 replies
  • Latest Post - ‏2013-01-24T14:04:41Z by ENO2010
ENO2010
ENO2010
12 Posts

Pinned topic Debug tool

‏2013-01-22T09:40:23Z |
Hi,

I tried to use the RDz 8.5.1 debugger to debug my COBOL Program but I received the next error message on the RD&T console :

14.24.20 JOB00675  +EQA9999E - Debug Tool TCPIP error 14.24.20 JOB00675  +EQA9999E - +Communications Failure allocating session 14.24.20 JOB00675  +EQA9999E - Debug Tool TCPIP error


How can I solved this problem

thanks

Eric
Updated on 2013-01-24T14:04:41Z at 2013-01-24T14:04:41Z by ENO2010
  • SystemAdmin
    SystemAdmin
    253 Posts

    Re: Debug tool

    ‏2013-01-22T10:30:21Z  
    These are very generic messages informing that Debug Tool has not been able to reach the client.
    I would check :
    - TCP/IP address set for debugging in submitted job number JOB00675. Make sure you can ping this address.
    - Are there any firewalls in the workstation where RDz is installed? If we have firewalls you must allow the port number being used by Debug Tool (default 8001).
  • ENO2010
    ENO2010
    12 Posts

    Re: Debug tool

    ‏2013-01-22T12:50:51Z  
    These are very generic messages informing that Debug Tool has not been able to reach the client.
    I would check :
    - TCP/IP address set for debugging in submitted job number JOB00675. Make sure you can ping this address.
    - Are there any firewalls in the workstation where RDz is installed? If we have firewalls you must allow the port number being used by Debug Tool (default 8001).
    I was running RDz in Virtual machine. I resinstall RDz on my workstation directly and now it's working fine.
    I need to check my VMware in order to understand why it isn't working. The firewall was disable on my VmWare.

    Eric
  • RDzJohn
    RDzJohn
    273 Posts

    Re: Debug tool

    ‏2013-01-22T13:11:41Z  
    • ENO2010
    • ‏2013-01-22T12:50:51Z
    I was running RDz in Virtual machine. I resinstall RDz on my workstation directly and now it's working fine.
    I need to check my VMware in order to understand why it isn't working. The firewall was disable on my VmWare.

    Eric
    fyi...RD&T is not supported running in a virtual machine.

    RDzJohn
  • ENO2010
    ENO2010
    12 Posts

    Re: Debug tool

    ‏2013-01-24T14:04:41Z  
    • RDzJohn
    • ‏2013-01-22T13:11:41Z
    fyi...RD&T is not supported running in a virtual machine.

    RDzJohn
    RD&T is not installed in a virtual machine but RDZ Client was running from a VmWare.