Topic
  • 4 replies
  • Latest Post - ‏2013-01-26T01:53:41Z by jtoma
SystemAdmin
SystemAdmin
704 Posts

Pinned topic How do I configure Tivoli Common Reporting (TCR) 1.2 with TAM eSSO?

‏2013-01-13T11:29:59Z |
I've installed TCR 1.2 in the same server where TAM eSSO 8.2 was already set up.
So TCR and TAM eSSO are running fine but I'll need to get TCR to point to the IMS DB.

I don't seem to be able to find the right documentation to help me configure this.

The first thing I attempt is to use this command from the below URL

http://pic.dhe.ibm.com/infocenter/tivihelp/v2r1/index.jsp?topic=%2Fcom.ibm.itamesso.doc%2Ftasks%2Fgeneratingreportsintcr1.2.html

install D:\IBM\tivoli\tip server1 tipadmin <password> --user db2admin --pwd <db password> --vendor db2 --dbname IMSDB --ip 10.168.1.66 --port 50000 --verbose
The system cannot find the file specified.

I've tried following this link to configure a data source.
http://pic.dhe.ibm.com/infocenter/tivihelp/v3r1/index.jsp?topic=%2Fcom.ibm.tivoli.tcr.doc%2Fttcr_jdbc_direct.html

I'm not sure how to perform step 3 mentioned in the page however.

Am I looking at the right place or do any of you have pointers to help me out?
Thanks!
Updated on 2013-01-26T01:53:41Z at 2013-01-26T01:53:41Z by jtoma
  • jtoma
    jtoma
    891 Posts

    Re: How do I configure Tivoli Common Reporting (TCR) 1.2 with TAM eSSO?

    ‏2013-01-19T01:14:15Z  
    As far as I can tell, the install command and the syntax look correct. Couple of things:

    a) Are you certain that your TCR Server Name is server1?
    b) In the install.bat file it has a set driverPath. Can you please verify that the path it's pointing to exists?
    c) The install.bat file also makes calls to the following:
    D:\IBM\tivoli\tip\products\tcr\bin\trcmd
    D:\IBM\tivoli\tip\bin\stopserver
    D:\IBM\tivoli\tip\bin\startserver
    D:\IBM\tivoli\tip\bin\wsadmin

    Please help to verify that all these files exist.
  • SystemAdmin
    SystemAdmin
    704 Posts

    Re: How do I configure Tivoli Common Reporting (TCR) 1.2 with TAM eSSO?

    ‏2013-01-22T05:05:49Z  
    • jtoma
    • ‏2013-01-19T01:14:15Z
    As far as I can tell, the install command and the syntax look correct. Couple of things:

    a) Are you certain that your TCR Server Name is server1?
    b) In the install.bat file it has a set driverPath. Can you please verify that the path it's pointing to exists?
    c) The install.bat file also makes calls to the following:
    D:\IBM\tivoli\tip\products\tcr\bin\trcmd
    D:\IBM\tivoli\tip\bin\stopserver
    D:\IBM\tivoli\tip\bin\startserver
    D:\IBM\tivoli\tip\bin\wsadmin

    Please help to verify that all these files exist.
    Hi,

    Thanks. I checked these steps and they were all okay.
    I managed to fix this issue by using another install.bat file present in the eSSO installables directory.

    /eSSO 8.2 Upgrade sw-final\IMS for UAT\IMS Server_x86\tcr_tam_e_sso_reports_8.2.0.0.502\isamesso-reports-deployment-8.2.0.0.502\deployment-TCR-1.2\

    One of my colleagues recommended me to use the install.bat in this folder.
    This folder also had other files like install.py, testConnection.py etc

    I copied these files over to the TCR installation folder and the commands then after worked smoothly.

    Regards,
    Nitin
  • SystemAdmin
    SystemAdmin
    704 Posts

    Re: How do I configure Tivoli Common Reporting (TCR) 1.2 with TAM eSSO?

    ‏2013-01-22T05:06:49Z  
    • jtoma
    • ‏2013-01-19T01:14:15Z
    As far as I can tell, the install command and the syntax look correct. Couple of things:

    a) Are you certain that your TCR Server Name is server1?
    b) In the install.bat file it has a set driverPath. Can you please verify that the path it's pointing to exists?
    c) The install.bat file also makes calls to the following:
    D:\IBM\tivoli\tip\products\tcr\bin\trcmd
    D:\IBM\tivoli\tip\bin\stopserver
    D:\IBM\tivoli\tip\bin\startserver
    D:\IBM\tivoli\tip\bin\wsadmin

    Please help to verify that all these files exist.
    Hi,

    Thanks. I checked these steps and they were all okay.
    I managed to fix this issue by using another install.bat file present in the eSSO installables directory.

    /eSSO 8.2 Upgrade sw-final\IMS for UAT\IMS Server_x86\tcr_tam_e_sso_reports_8.2.0.0.502\isamesso-reports-deployment-8.2.0.0.502\deployment-TCR-1.2\

    One of my colleagues recommended me to use the install.bat in this folder.
    This folder also had other files like install.py, testConnection.py etc

    I copied these files over to the TCR installation folder and the commands then after worked smoothly.
  • jtoma
    jtoma
    891 Posts

    Re: How do I configure Tivoli Common Reporting (TCR) 1.2 with TAM eSSO?

    ‏2013-01-26T01:53:41Z  
    Hi,

    Thanks. I checked these steps and they were all okay.
    I managed to fix this issue by using another install.bat file present in the eSSO installables directory.

    /eSSO 8.2 Upgrade sw-final\IMS for UAT\IMS Server_x86\tcr_tam_e_sso_reports_8.2.0.0.502\isamesso-reports-deployment-8.2.0.0.502\deployment-TCR-1.2\

    One of my colleagues recommended me to use the install.bat in this folder.
    This folder also had other files like install.py, testConnection.py etc

    I copied these files over to the TCR installation folder and the commands then after worked smoothly.
    Great, thank you for sharing your answer. This may help someone in the future.