I'm having following machine details:
having following expansion card:
Qlogic 8Gb Fiber Channel Expansion Card (CIOv)
Qlogic 8Gb CFFh Combo card, fibre Channel and Ethernet
Part No: 44x1942
Warnings and System Events
(01/08/13 05:10:05) I/O module 3 incompatible with blade configuration
(01/08/13 05:10:05) I/O module 4 incompatible with blade configuration
and event log is showing following warning messages:
17 W Blade_01 01/08/13 05:27:13 0x0e006001 Blade 1 incompatible with I/O module configuration
29 W SERVPROC 01/08/13 05:12:04 0x06002003
Request to acquire MT denied by Management Module for Blade in bay (1)
30 W IOMod_04 01/08/13 05:10:05 0x0ea0c004
I/O module 4 incompatible with blade configuration
31 W IOMod_03 01/08/13 05:10:05 0x0ea0c003
I/O module 3 incompatible with blade configuration
32 W Blade_03 01/08/13 05:10:05 0x0e006003
Blade 3 incompatible with I/O module configuration
Help required and thanks in advance
Pinned topic warning: I/O module 3 incompatible with blade configuration
Answered question This question has been answered.
Unanswered question This question has not been answered yet.
Updated on 2013-01-09T04:17:18Z at 2013-01-09T04:17:18Z by rakeshsinnya
rakeshsinnya 2700006HS12 Posts
Re: warning: I/O module 3 incompatible with blade configuration2013-01-09T04:17:18ZThis is the accepted answer. This is the accepted answer.
- SystemAdmin 110000D4XK
I am using Qlogic (R) 8GB Intelligent Passthrough Module for IBM Blade Center Part No: 44X1907 in both slot 3 and slot 4.