Topic
4 replies Latest Post - ‏2013-01-25T06:43:58Z by SystemAdmin
SystemAdmin
SystemAdmin
6908 Posts
ACCEPTED ANSWER

Pinned topic 11002800 error in 8202-E4B

‏2013-01-02T10:01:15Z |
I am getting the error 11002800 on my p7-720 machine which means that the top cover is removed.But I have not removed the top cover.Is this the bug or what.I have the following firmware level installed on my machine
IBM,8202-E4B

The current permanent system firmware image is AL730_035
The current temporary system firmware image is AL730_035
The system is currently booted from the temporary firmware image
Updated on 2013-01-25T06:43:58Z at 2013-01-25T06:43:58Z by SystemAdmin
  • alethad
    alethad
    286 Posts
    ACCEPTED ANSWER

    Re: 11002800 error in 8202-E4B

    ‏2013-01-02T18:46:13Z  in response to SystemAdmin
    Is this suddenly occurring? You haven't had the hardware worked on recently? Or someone did it when you weren't looking and just forgot to tell you?

    It might be just a bad sensor. Probably would want your hardware engineer check it out or consult him about it. Unless you feel comfortable enough to reseat the cover yourself just to see if the error stops.
    Good Luck.

    You've got to continue to grow, or you're just like last night's cornbread -- stale & dry Loretta Lynn alethad
  • SystemAdmin
    SystemAdmin
    6908 Posts
    ACCEPTED ANSWER

    Re: 11002800 error in 8202-E4B

    ‏2013-01-24T09:01:10Z  in response to SystemAdmin
    Today again I got the same problem.Do i need to change the sensor.I am the hardware engineer.So i need to tell customer if it is the board problem or not.

    Thanks in advance
    • dukessd
      dukessd
      337 Posts
      ACCEPTED ANSWER

      Re: 11002800 error in 8202-E4B

      ‏2013-01-25T02:33:32Z  in response to SystemAdmin
      Hi,

      "my p7-720" "I have not removed the top cover" "my machine"
      "Probably would want your hardware engineer check it out or consult him about it."
      "I am the hardware engineer.So i need to tell customer"...

      I'm sorry buy it doesn't add up.

      I guess you are selling IBM services and you have no affiliation with IBM, if you do then just raise a service request.

      You obviously don't own the machine either, or even work for the company who does, despite claiming it is your machine.

      You are posting on the IBM forum, trying to get for free, advice from on how to do your job, and sell IBM services for your own gain!

      I think your customer should get a new hardware engineer or take out a maintenance agreement with IBM who will be better placed to help them.

      Sorry, but if you are trying to sell a service you cannot provide I'm only going to say this is not the place to ask how to get out of the hole you have dug and then fallen into.

      I hope this post provides you with some ideas in which direction to take in life.
  • SystemAdmin
    SystemAdmin
    6908 Posts
    ACCEPTED ANSWER

    Re: 11002800 error in 8202-E4B

    ‏2013-01-25T06:43:58Z  in response to SystemAdmin
    Well the problem is solved by replacing the sensor.